HAVANA 3 OVER 4 CHEST ASSEMBLY INSTRUCTIONS

Transcription

1 Thank you for purchasing the HAVANA 3 OVER 4 CHEST. Please read the instructions carefully to ensure safe operation of the product. Size:125x44x77cm Colour:3D OAK Finish:PAPER FOIL PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction. Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not destroy any of the packaging until you are certain that you have all the necessary parts for the assembly. CAUTION: There are small components used in the construction of this unit. These loose items should be kept away from young children whilst assembling your unit to avoid the danger of choking hazards. Tools Required Page 1 of 16

2 IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. INFORMATION This product is intended for a maximum weight of 20 kg. Do not exceed this weight. Due to the size of this product we recommend that it is assembled in the room intended for use. When you are ready to start, make sure that you have the right tools, plenty of space and a clean, dry area for assembly. Unwrap all packaging materials and place the components on top of the carton box or on a clean floor to prevent it from scratching. Check the pack and make sure you have all the parts listed. Ensure that this product is fully assembled as illustrated before use. Check all screws or bolts are tightened and inspect regularly. This product should only be used on firm, level ground. Keep small parts out of reach of children. Make sure the legs remain in contact with the ground. Tools are not included. WARNINGS DO NOT use power tools to construct this product. DO NOT tighten screws until fully assembled. DO NOT over tighten screws or bolts. DO NOT use this product if parts are missing, damaged or worn. DO NOT sit or stand on the product. We recommend the use of the wall fixings provided for safety reasons. N.B. If in doubt please consult a qualified tradesperson. Warning: Always ensure the area to be drilled is free from hidden electrical wires, water and gas pipes. It is essential that this unit is fixed to a wall with the fixings provided. CARE INFORMATION Never use scourers, abrasives or chemical cleaners. To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or detergents as they can bleach or damage the product Page 2 of 16

3 Please check the pack contents before assembling this product. If any components are missing, please contact your retailer.the fittings pack contains small items that should be kept away from small children. x2 x2 Page 3 of 16

4 Parts Description: Top Panel 6 Description: Left Side Panel 7 Description: Right Side Panel 8 Description: Left Front Post 9 Description: Left Back Post Description: Right Front Post Description: Right Back Post Description: Top Middle Panel Qty: 2 PCS Description: Middle Panel Description: Front Support Panel Description: Back Support Panel Description: Lower Support Panel 1 Qty: 2 PCS Description: Lower Support Panel 2 Description: Lower Support Panel 3 Description: Small Drawer Front Panel 1 Description: Left Small Drawer Side Panel Qty: 3 PCS Description: Right Small Drawer Side Panel Qty: 3 PCS Description: Small Drawer Back Panel Qty: 3 PCS Description: Small Drawer Bottom Panel Qty: 3 PCS Description: Small Drawer Front Panel 2 Description: Small Drawer Front Panel 3 Description: Large Drawer Front Panel 1 Qty: 2 PCS Description: Large Drawer Front Panel 2 Qty: 2 PCS Description: Left Large Drawer Side Panel Qty: 4 PCS Description: Right Large Drawer Side Panel Qty: 4 PCS Description: Large Drawer Back Panel Qty: 4 PCS Description: Large Drawer Bottom Panel Qty: 4 PCS Description: Back Panel Page 4 of 16

5 Fittings(to scale) Ref Dimensions Qty A B C D E G CAM BOLT(Ø6x35mm) CAM LOCK (Ø15x10mm) SCREW (4x40mm) DOWEL (6x30mm) SCREW (3x12mm) NAIL-20mm I NAIL-Ø12x18mm 4 F CAM LOCK (Ø15x12mm) 24 (Not to scale) H HANDLE 7 J RAIL 7 K ROUND FOOT 2 CAUTION:There are many small components used in the construction of this product. Please keep these components away from young children whilst assembling this product. If you keep the fittings in a bowl during assembly you will be less likely to lose them! Page 5 of 16

6 Hints & Tips HAVANA 3 OVER 4 CHEST ASSEMBLY INSTRUCTIONS Don't screw too deep Layout Parts on Soft Surface Lay out all parts on a soft surface i.e. Rug, Carpet or Packaging Carton Page 6 of 16

7 STEP 1 2 Left Side Panel x1 3 Right Side Panel x1 4 Left Front Post x1 5 Left Back Post x1 6 Right Front Post x1 7 Right Back Post x1 A CAM BOLT x6 B CAM LOCK x6 C SCREW x6 D DOWEL x8 Page 7 of 16

8 STEP 2 2 Left Side Panel x1 3 Right Side Panel x1 E SCREW x18 I NAIL x4 J1 RAIL x3 J2 RAIL x3 Page 8 of 16

9 STEP 3 8 Top Middle Panel x2 9 Middle Panel x1 10 Front Support Panel x1 11 Back Support Panel x1 C SCREW x4 D DOWEL x4 E SCREW x24 J1 RAIL x4 J2 RAIL x4 Page 9 of 16

10 STEP 4 9 Middle Panel x1 10 Front Support Panel x1 11 Back Support Panel x1 12 Lower Support Panel 1 x2 13 Lower Support Panel 2 x1 14 Lower Support Panel 3 x1 A CAM BOLT x4 C SCREW x4 D DOWEL x8 F CAM LOCK x4 Page 10 of 16

11 STEP 5 2 Left Side Panel x1 3 Right Side Panel x1 A CAM BOLT x16 D DOWEL x8 F CAM LOCK x16 K ROUND FOOT x2 Page 11 of 16

12 STEP 6 1 Top Panel x1 A CAM BOLT x8 B CAM LOCK x4 D DOWEL x16 F CAM LOCK x4 Page 12 of 16

13 STEP 7 15 Small Drawer Front Panel 1 x1 16 Left Small Drawer Side Panel x3 17 Right Small Drawer Side Panel x3 18 Small Drawer Back Panel x3 19 Small Drawer Bottom Panel x3 20 Small Drawer Front Panel 2 x1 21 Small Drawer Front Panel 3 x1 A CAM BOLT x12 B CAM LOCK x12 C SCREW x12 E SCREW x18 H HANDLE x3 J3 RAIL x3 J4 RAIL x3 Page 13 of 16

14 STEP 8 22 Large Drawer Front Panel 1 x2 23 Large Drawer Front Panel 2 x2 24 Left Large Drawer Side Panel x4 25 Right Large Drawer Side Panel x4 26 Large Drawer Back Panel x4 27 Large Drawer Bottom Panel x4 A CAM BOLT x16 B CAM LOCK x16 C SCREW x16 E SCREW x24 H HANDLE x4 J3 RAIL x4 J4 RAIL x4 Page 14 of 16

15 STEP 9 28 Back Panel x1 G NAIL x34 Important: The cabinet MUST be 'square' when the back is attached. STEP 10 Page 15 of 16

16 Complete Assembly Your HAVANA 3 OVER 4 CHEST is now completely assembled. Periodically check to ensure that the components are in their proper position, free from damage. Also, make sure the connectors are tight and secure. Keep instructions for future reference. Page 16 of 16