NewTechWood Screening Installation Guide. v au

Transcription

1 NewTechWood Screening Installation Guide v au

2 IMPORTANT: Read All Sections Before You Start For the most up to date information, please visit our NewTechWood screening profiles are designed for decorative and privacy screening applications only. They are NOT RECOMMENDED TO BE USED FOR THE FOLLOWING: X Pool or security fencing X Safety Balustrading X Structural Elements X Applied directly to solid surfaces Expansion & Contraction: NewTechWood Screening will expand and contract in length with changes in temperature, due to the nature of the composite material. This is normal behaviour of any wood plastic composite and is not a product fault. It is important to take this into proper consideration before installing. The amount of expansion and contraction you experience is dependent on several different factors including: Temperature at the time of installation. Length of board. The longer the length the more expansion; shorter the length, less expansion. Fixing to Timber: 1. Stainless Steel 8g x 50mm or 10g x 65mm composite screws are recommended for fixing NewTechWood Screening profiles to timber posts.. 2. Pre-drill and countersink all holes to avoid mushrooming. It is recommended to drill holes slightly larger than the screw to allow for any expansion and contraction. Fixing to Metal 1. Stainless Steel 10g x 40mm self-tapping screws are recommended when fixing NewTechWood Screening profiles to metal posts. 2. Pre-drill and countersink all holes to avoid mushrooming. It is recommended to drill holes slightly larger than the screw to allow for any expansion and contraction. Thermal Deflection Due to the nature of wood plastic composites, NewTechWood Screening profiles may show a slight deflection between posts when in direct sunlight. This is generally caused by heat exposure to one side of a board as opposed to the other. The extent to which this occurs is dependent on several factors including ambient air temperature. This phenomenon is not considered a product fault. NewTechWood Screening Installation Guide / v au 1

3 NEWTECHWOOD SCREENING SPAN TABLE Profile US36 70mm x 17mm US06 138mm x 15mm US07 138mm x 23mm UB01 56mm x 32mm UH17 60mm x 42mm UH25 100mm x 52mm Single centre to centre maximum span (horizontal installation) Continuous centre to centre maximum span (horizontal installation) 900mm 800mm 900mm 900mm 1200mm 1350mm 900mm 800mm 1200mm 1200mm 1200mm 1350mm Maximum span between rails (vertical installation) 900mm 800mm 1200mm 1200mm 1350mm 1500mm Minimum distance from edge of boards for fastening 15mm 15mm 15mm 15mm 15mm 15mm Number of fasteners per fixing point Minimum clearance from rear wall Minimum gap spacing between boards mm 30mm 30mm 30mm 30mm 30mm 2mm 2mm 2mm 5mm 5mm 5mm Minimum ground clearance 50mm 50mm 50mm 50mm 50mm 50mm Minimum clearance from end of board to fixed structure Minimum end to end butt joint 5mm 5mm 5mm 5mm 5mm 5mm 3mm 3mm 3mm 3mm 3mm 3mm Maximum overhang 25mm 25mm 40mm 40mm 50mm 50mm NewTechWood Screening Installation Guide / v au 2

4 70mm x 15mm 138mm x 15mm 138mm x 23mm Number of fasteners per fixing point Minimum distance from edge of boards for fastening 15mm 15mm 15mm Maximum centre to centre post spacing 1800mm 1800mm 2400mm Maximum intermediate support spacing 900mm 900mm 1200mm Minimum clearance from wall 30mm 30mm 30mm Minimum gap spacing between boards 5mm 5mm 5mm Minimum ground clearance 50mm 50mm 50mm Minimum clearance from end of board to fixed structure 6mm 6mm 6mm Minimum end to end butt joint 2mm 2mm 2mm Maximum overhang 25mm 25mm 40mm Page 2

5 NewTechWood Slat Screening Installation incorporating Aluminium Post & Channel Extrusions NEWTECHWOOD 70 x 15m SPECIFIED SPACING 900 mm 1800 mm INTERMEDIATE SUPPORT SLAT OPTIONS 70mm x 15mm x 5.4m 138mm x 15mm x 4.88m POWDERCOATED CHANNEL POSTS 44 X 44 CHANNEL POSTS Square 44 x 44mm Channel Posts with 20 x 20mm Channel. STYLES: 1-Way; 2-Way; 3-Way LENGTHS: In Ground Post: 200 x 500/600mm Post Hole Hole filled with Post Mix Concrete P/COATED U CHANNEL & INTERMEDIATE SUPPORT 20 X 20 X 1.6mm U Channel can be used instead of Channel posts to fix to existing posts. 20 x 8 x 1.6mm Intermediate Support. MATERIALS 6063 T6 Aluminium Powder Coated All our Aluminium post and channels are available in the Interpon Powder Coating Colour Range. Page 3

6 Channel Post - 1 Way Channel Post - 2 Way Channel Post - 3 Way 44 x 44 mm 44 x 44 mm 44 x 44 mm INTERMEDIATE SUPPORT 900 mm 2 X SCREWS P/SLAT NewTechWood 1800 mm 2-WAY POST CHANNEL POST FIXING DETAIL TOP VIEW 1-WAY POST INTERMEDIATE SUPPORT 900 mm 2 X SCREWS P/SLAT 20 X 20 MM U-CHANNEL POST FIXING DETAIL TOP VIEW Concealed Fixing Cover 20 x 8 x 1.6mm U-Channel 20 x 20mm Page 4

7 MAXIMUM SPAN BETWEEN POSTS FOR FREE STANDING SCREENS IS 1800MM WITH AN INTERMEDIATE SUPPORT AT 900MM. INTERMEDIATE SUPPORT. SCREW FIXED WITH ONE SCREW PER SLAT AT REAR OF SCREEN. 2 x SCREWS PER SLAT. PRE-DRILL ALL HOLES. SCREWS TO BE A MINIMUM OF 15MM FROM EACH EDGE OF SLAT. NEWTECHWOOD SCREEN SLATS A major benefit of the NewTechWood Slat System is it allows you to choose your own slat spacings to suit your individual requirements! NewTechWood slat panels require 2 x 10g x 10-12mm Self Tapping Screws fixing at each end of each slat. Pre-Drill holes slightly larger than screw to allow for expansion and contraction. Page 5

8 Intermediate Supports every 900 mm. ADD EXTRA SCREW ON EACH SLAT. NewTechWood Slats Page 6

9 Distributed by: Page 7 Please visit for more information. info@urbandirectwholesale.com.au Page

10 NewTechWood Screening Installation Guide v au 2017 Distributed in Australia by: Urban Direct Wholesale Pty Ltd Unit 1, 5 Erceg Road Yangebup, WA 6164, Western Australia info@urbandirectwholesale.com.au NewTechWood is a registered trademark of Huidong Meixin Plastic Lumber Products Manufacturing Co., Ltd. To obtain a copy of the most current version of this installation guide, visit us online at