The New Unrivalled SRB Titan Magnet Clamps & Spartan Composite Adjustable Sideforms
|
|
- Elaine Edwards
- 5 years ago
- Views:
Transcription
1 SRB PRECAST FORMWORK The New Unrivalled SRB Titan Magnet Clamps & Spartan Composite Adjustable Sideforms Australian Designed and Manufactured to suite Robust and Demanding requirements of the Precast Industry. The most efficient and safest magnetic clamps to use by far! SRB Titan 1,800 kg Precast Magnetic Clamps Smaller & Lighter than most other equivalent Strength Magnet Clamps Far Greater Shear Strength capacity than majority of other Magnetic Clamps with equivalent or similar Magnetic Pull Down Strength Absorbs production vibration and outperforms majority of other magnetic clamps on vibrating casting tables Fully sealed Housing to protect from Dirt and foreign Metallic / Magnetic Matter Structural Polymer Housing minimises concrete stick and allows for easier and more cost effective cleaning & maintenance. No Shear zones between handles and housing or housing and steel casting bed - Minimises risk of Injury or Amputation. The safest Magnetic Clamp available for operational use & handling fulfilling Occupational Health & Safety obligations Simple Handle operation for efficient and safer use & handling. No need or requirement to use long levers to disengage clamps. Semi Engagement function allows for fine positional adjustment of shuttering without need to hit with hammers prolonging formwork operational life span Best Selling Precast Formwork System in Australia SRB Systems Ph: Fax: info@srb.net.au 1
2 Connecting Adaptor Plates to Titan Magnets SRB Titan Magnet Clamps The S/H Screws should not to be over tightened by use of tools so as to allow for quick and easy removal and replacement. Over tightening with tools can cause the adaptor to travel down the magnet face and indentations to be placed in the adaptor face by the S/H Screws. This also makes adaptor replacement more difficult as it then requires tools to release the tension on the S/H Screws. To remove the adaptor from the magnet the adaptor is tapped from the top so as to slide down the face of the magnet & align the S/H Screws with the large holes in the adaptor keyhole slots allowing the adaptor to be released from the S/H Screws and the magnet. Custom adaptor plates can be made to enable the Titan Magnet to be used with other Sideforms or shutters. Connecting Titan Magnets to Spartan Sideforms The Titan Magnets attach to the Spartan sideforms via adaptor plates (adaptors) designed to lock into ball lock rail strips along the rear of the Spartan Sideform. The adaptors have slotted key hole connections that go over the Socket Head (S/ H) Screws in the face of the Titan Mag- The adaptors are placed against the front face of the magnets with the larger holes in the keyhole slot lining up with the S/H Screws in the magnet face. The adaptors thus fit over the S/H Screws and against the magnet face. The adaptor is moved up the face of the magnet until the shanks of the S/H Screws in the magnet face travel to the end limit of the narrow slots in the Adaptor. Once the Screw Shanks are bottomed out in the adaptor slots the S/H Screws are finger tightened to hold the adaptor in place. Engagement The Connection and engagement of the Titan Magnet to Spartan Sideform is extremely quick and simple not involving or requiring any bolts, screws or tools. The Titan Magnet with appropriate size adaptor for sideform affixed is lowered against the rear of the sideform. The Ball Lock in the face of the adaptor is placed into the ball lock rail strip at the rear of the Sideform and magnet clamp released onto the casting bed with ball lock in the adaptor engaged in the ball lock rail strip on the sideform. The magnet handles are then lowered towards the steel casting Table / Bed to engage the magnet to the steel base. Disengagement The Titan Magnet is disengaged from the sideform after concrete has set in the mould simply by lifting up on the magnet handle. Once disengaged, continue with the upward motion holding onto the handle, lifting the magnet upwards. The adaptor attached to the magnet will come out of the ball lock rail in the rear of the sideform disengaging the magnet completely from the sideform. Quick and easy engagement and disengagement, No need for levers or bars, screws, bolts and spanners - It cannot be any more simple. Magnet Semi-Engagement Function The Titan Magnet allows for semi engagement of the magnetic load by rotating the handle partially towards the steel table i.e. rotate the handles by only 1/2 rotation. This then does not engage the full magnetic load of the magnets to the table thus enabling the magnet to be tapped by foot for fine adjustment to be made to the sideform position. No need to hit magnets or sideforms with hammers for fine adjustment. 2
3 SRB Titan Screw Fix Brackets Connecting Spartan Sideforms via Screw Fixing to Casting Tables / Beds Ball Lock Rail Strip The Titan Screw Fix Bracket is used to secure the Spartan (and other) sideforms to the casting table via Screw Fixing in lieu of the using magnets as the fixing method. The SRB Ball Lock Adaptor Plates (Adaptors) affix to the Titan Screw Fix Bracket in exactly the same way as they would to the Titan Magnet Clamp. The Titan Screw Fix Bracket affixes / secures to the rear of the Spartan Sideform in exactly the same fashion as does the Titan Magnet Clamp. Once the Screw Fix Bracket is engaged in the Ball Lock Rail Strip along the rear of the sideform the Screw Fix Bracket is screw fixed to the casting table via appropriate fixing screws or bolts / anchors. The Screw Fix Bracket is fully compatible and interchangeable with the Titan Magnet Clamps as are the Adaptor Plates that are common to both. The Ball Lock Rail Strip is designed to provide a Ball Lock rail connection to other shuttering and sideform such as Timber / Lumber, plywood, extruded aluminium etc. to enable quick and easy ball lock connection support by Titan Magnets or Screw Fix Brackets. The Ball Lock Rail Strip is aligned with the bottom face or edge of the sideform / shutter and screw fixed to the shutter at appropriate centres. Steel variants of the ball lock rail strip are available for bolting or tack welding to 3
4 SRB Spartan Composite Adjustable Sideforms Precast Sideforms / Shuttering that accommodates change of Height, Chamfer / Fillet Profile & Edge Profile. High grade structural Aluminium Alloy 5.8 m long Extrusions Come in Standard Section Heights of:- Size Colour 55 mm Charcoal 100 mm Off-White 125 mm Jade 150 mm Grey 175 mm Blue 200 mm Deep Red High Moment of Inertia for maximum support spacing Substantially lighter than traditional steel shuttering allowing for one man installation of Epoxy powder coated to minimise concrete stick and eliminates the need for mould release agent application to sideforms hence minimises concrete retarding issues Sideforms and Capping are colour coded by size for simple visual identification. Rubber Base Fillet Chamfer insert at base of sideforms minimises concrete bleed and eliminates the need for application of silicone at interface of sideform base and casting table Snap-On PVC Capping Chamfer profiles at top of sideform allow for simple, quick and easy change in chamfer profile and sideform height in 5 mm increments. PVC capping extension channels concrete spillage away from rear of sideform 4
5 SRB Spartan Composite Adjustable Sideforms Current Capping Profiles Profile SCC12C00: 12 mm x 12 mm Chamfer + 00 mm Resultant Overall Sideform Shutter Heights when Capping applied to Standard Sideform Sections 55 mm + 00 = 55 mm O/A Section Height 100 mm + 00 = 100 mm O/A Section Height 125 mm + 00 = 125 mm O/A Section Height 150 mm + 00 = 150 mm O/A Section Height 175 mm + 00 = 175 mm O/A Section Height 200 mm + 00 = 200 mm O/A Section Height SCC12C05: 12 mm x 12 mm Chamfer + 05 mm 55 mm + 05 = 60 mm O/A Section Height 100 mm + 05 = 105 mm O/A Section Height 125 mm + 05 = 130 mm O/A Section Height 150 mm + 05 = 155 mm O/A Section Height 175 mm + 05 = 180 mm O/A Section Height 200 mm + 05 = 205 mm O/A Section Height SCC12C10: 12 mm x 12 mm Chamfer + 10 mm 55 mm + 10 = 65 mm O/A Section Height 100 mm + 10 = 110 mm O/A Section Height 125 mm + 10 = 135 mm O/A Section Height 150 mm + 10 = 160 mm O/A Section Height 175 mm + 10 = 185 mm O/A Section Height 200 mm + 10 = 210 mm O/A Section Height SCC12C15: 12 mm x 12 mm Chamfer + 15 mm 55 mm + 15 = 70 mm O/A Section Height 100 mm + 15 = 115 mm O/A Section Height 125 mm + 15 = 140 mm O/A Section Height 150 mm + 15 = 165 mm O/A Section Height 175 mm + 15 = 190 mm O/A Section Height 200 mm + 15 = 215 mm O/A Section Height SCC12C20: 12 mm x 12 mm Chamfer + 20 mm 55 mm + 20 = 75 mm O/A Section Height 100 mm + 20 = 120 mm O/A Section Height 125 mm + 20 = 145 mm O/A Section Height 150 mm + 20 = 170 mm O/A Section Height 175 mm + 20 = 195 mm O/A Section Height 200 mm + 20 = 220 mm O/A Section Height 5
6 Current Capping Profiles SCC12C25: 12 mm x 12 mm Chamfer + 25 mm 55 mm + 25 = 80 mm O/A Section Height 100 mm + 25 = 125 mm O/A Section Height 125 mm + 25 = 150 mm O/A Section Height 150 mm + 25 = 175 mm O/A Section Height 175 mm + 25 = 200 mm O/A Section Height 200 mm + 25 = 225 mm O/A Section Height SCCSQ00: Square Profile (No Chamfer) + 00 mm 55 mm + 00 = 55 mm O/A Section Height 100 mm + 00 = 100 mm O/A Section Height 125 mm + 00 = 125 mm O/A Section Height 150 mm + 00 = 150 mm O/A Section Height 175 mm + 00 = 175 mm O/A Section Height 200 mm + 00 = 200 mm O/A Section Height Capping Removal Tool The Capping Removal Tool is a high grade glass filled polymer custom Multi Function tool. The Primary function of the tool is to assist with quick and easy removal of the Capping profiles from the sideform with secondary functions of Locking into the sideform to assist in stripping sideforms away from cast concrete, scraping clean the capping and sideform surfaces and cleaning the T lock and ball lock rails at rear Removal of Capping from Sideform Extrusions Locking into T Rail at rear of Sideform to assist in stripping sideform away from cast concrete & cleaning any spillage or dirt from the T Rail in the sideform. Sur- Scraping spillage from Capping & Sideform faces Cleaning any spillage from Ball Lock Rail Strip 6
7 Joining SRB Spartan Sideforms Temporary in-use Connection - Sideform Joiner Pates Permanent Connection - Sideform Joiner Sleeves The Sideform Joiner Plates are used to connect lengths of Spartan Sideforms to one another during the moulding process and then to allow for simple disengagement / separation of the two lengths on completion. The Joiner Plate is engaged by turning two large knobs to clamp the steel plates around flanges in the Connection Rail along the rear of the Spartan Sideforms. No need for Screws, bolts or tools and other equipment. The Joiner Plate is generally kept in one of the master lengths of sideforms simply by tightening the knobs when flush with the end of sideform hence no need for removal or re-insertion into the sideform. To join to another length or piece of sideform the knobs are released and the Joiner Plate is moved out of the sideform so as the middle of the adaptor is in line with the end of the sideform. The sideform being joined is then aligned and the Joiner Plate inserted into the Connection Rail in that section. Once sideforms are abutted the knobs in the Joiner Plate The Spartan Sideform have internal Rails designed to suite standard square hollow section Stainless Steel tubing. These Rails are designed to support stainless steel tubes for permanent joining of sideform lengths or pieces. Sections of stainless Steel tubing or Joiner Sleeves are inserted into one end of a sideform length or piece to be joined. The Joiner Sleeves are secured in that end via self drilling screws or pop rivets. Depression in the rear of the sideform allow for the screw & pop Rivet heads not to interfere with operation of the sideform and have a Centreline drilling line marking the drilling position. The protruding Joiner Sleeves are then inserted into the other length or piece of sideform being joined and when the sideforms are flush butted the other sideform is also secured to the Joiner Sleeves by screws or pop rivets. Sideform can thus be permanently joined to minimise 7
8 Corporate, Administration & Design Office Corporate Postal Ground Floor P.O. Box 421, 18 Dequetteville Terrace Blackwood, South Australia Kent Town, South Australia 5067 Australia 5051 Ph: Fax: info@srb.net.au Web: http// 8
BEST PRACTICE GUIDE. Socket Bases. Working with Concrete Slabs
Working with Concrete Slabs When working with concrete slabs the barrier protection can be erected in three ways - with socket bases, adjustable slab edge brackets and multi slab clamps. Socket Bases 1
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationALL SEASON PATIO COVER
ALL SEASON PATIO COVER 61 Where the All Season Patio Cover is to be attached to the home, create a level line showing where the top of the mounting rail is to be located. Install each section with the
More informationFord Pick Up Rear leaf Spring Kit Installation Instructions
1948-1956 Ford Pick Up Rear leaf Spring Kit Installation Instructions 1-800-984-6259 www.totalcostinvolved.com Parts 48 inch leaf (2) springs (4) U-bolts 3/8-24 x l 1/4bolts (16) & nuts (2) 1/2-20 x 4
More informationF i t t i n g t h e N e w L a n d i n g G e a r t o Y o u r S k y J i b V 1
F i t t i n g t h e N e w L a n d i n g G e a r t o Y o u r S k y J i b V 1 1 P a r t s L i s t : S t a n d a r d L a n d i n g G e a r U p g r a d e Product Code Parts + Spares Product Code Parts + Spares
More information3 BRACKET TO GUIDE ATTACHMENT. RIGHT END Figure 1. EXTENDED BRACKET (for doors taller than 8-8 ) SERIES 650. RIGHT END COTTER PIN Figure 6
2 DOOR ARRANGEMENT. A Lay door on a clean floor inside of building and in front of opening (see Figure 1). NOTE: Door can be damaged if laid on unclean surface. B Distribute parts bags, guides, stops and
More informationOxford Stalls Installation Instructions
Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or
More informationInstallation Guide Simplicity Alfresco. V1.9 Lu070318
0333 305 5272 www.canoports.co.uk Installation Guide Simplicity Alfresco V1.9 Lu070318 Tools Required Below is a list of tools that you will require to install your the Simplicity Alfresco System. Cordless
More informationINSTALLATION GUIDE 2009-CURRENT HUMMER H3T PRODUCT CODE:
INSTALLATION GUIDE 2009-CURRENT HUMMER H3T PRODUCT CODE: 268 June 22, 2010 TOOLS NEEDED COMPONENTS INCLUDED P2 Tip 3/8" Drill Rubber Gasket(s) x 2 Bracket(s) x 2 1/2" Drill Bit Bulkhead Flange #2 Phillips
More informationDublin Stalls Installation Instructions
Dublin Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 9/13/17 Part Identification Round Track Bracket (4) (Not Painted) Round
More informationDowntown Rack. Custom logo option available
Custom logo option available Downtown Rack The Downtown Rack uses thick, square-tube construction that can t be cut with a pipe cutter. The extended width of the Downtown Rack makes for easy bike parking
More informationDIY GLASS BALUSTRADE AND POOL FENCING THE CHOICE IS SIMPLE
DIY GLASS BALUSTRADE AND POOL FENCING THE CHOICE IS SIMPLE SAFE STYLISH AND AFFORDABLE FOR DIY GLASS FENCE SOLUTIONS THE CHOICE IS SIMPLE Bring your outdoor areas to life with clear views and clean lines.
More information`48-`56 Ford Pickup Rear leaf Spring Kit Installation Instructions Tech Line:
`48-`56 Ford Pickup Rear leaf Spring Kit Installation Instructions Tech Line: 1-855-693-1259 www.totalcostinvolved.com CHECK ALL PARTS INCLUDED IN THIS KIT TO THE PARTS LIST BEFORE INSTALLING THE KIT.
More informationSLIDING MECHANISM TROLLEY CATCH TROLLEY ASSEMBLY FLOOR GUIDE
Set A Set B P7001 Standard Kit Glass Door FITTING INSTRUCTIONS SUGGESTED TOOLS DRILL MITRE/CHOP SAW TAPE MEASURE (Image for reference only) HACKSAW POCKER DOOR KIT SHORT / LONG Z SECTION LONG Z SECTION
More informationINSTALLATION INSTRUCTIONS
Tools required for the installation. A. Core Drill 87mm Drill bit B. Tape measure C. Spirit Level D. Marking pen E. Caulking gun F. Cutting Pliers G. Cordless Drill and Philips head bit, 5mm Drill bit.
More informationMobile Weapons Storage System Specifications
Mobile Weapons Storage System Specifications Whatever your weapon storage needs, Hi-Density s customized Weapons Storage System will be designed to fit your unique specifications. We recognize that security
More informationDura-Lock Roof System
DLR-14 Dura-Lock Roof System Assembly and Installation Instructions Read the instructions before starting the job. They explain the steps required to produce a finished product that will meet factory specifications.
More informationSteelChief Installation Instructions for pre-assembled panel form sheds GABLE ROOF
SteelChief Installation Instructions for pre-assembled panel form sheds GABLE ROOF Please read fully before commencing work...any queries will be promptly answered, contact theboss@steelchief.com.aui MPORTANT
More informationPERFORM WITH PRECISION MAGNETIC PRODUCTS FOR PRECASTING CONCRETE CONSTRUCTION SOLUTIONS BROCHURE
MAGNETIC PRODUCTS FOR PRECASTING PERFORM WITH PRECISION CONCRETE CONSTRUCTION SOLUTIONS BROCHURE Form Magnets ON/OFF MAGNETS Strong adhesion and shear capacity -650# to 2500# adhesion Easy to turn on or
More informationInstallation Guide Contemporary Alfresco V1.3 LU
Installation Guide Contemporary Alfresco V1.3 LU 010818 Tools Required Below is a list of tools that you will require to install you're the Contemporary Alfresco System. Cordless Drill Mastic Gun Spirit
More informationMODUS 770 AND MODUS 1280 (FLAT PACK) OPERATIONAL, ASSEMBLY & FIXING INSTRUCTION LEAFLET
MODUS 770 AND MODUS 1280 (FLAT PACK) TM TM OPERATIONAL, ASSEMBLY & FIXING INSTRUCTION LEAFLET NOTE: Ensure that all relevant personnel read the points listed below and that a copy is passed on to staff
More informationFIXED MOUNTING SHUTTERS INSTALLATION
FIXED MOUNT APPLICATIONS The following components are included for Fixed Mount Applications. (4) Polycarbonate mounting brackets (slotted) (8) #10 x ¾ Stainless Steel Mounting Screws (1) 0.5 oz. Tube All-Weather
More informationExperience the Hi-Lite Advantage
Experience the Hi-Lite Advantage 12K Aluminum Shoring System INTRODUCTION The 12K Shoring System is primarily a hand-set system. It can also be handled with a crane, and may also be used quite successfully
More informationPreference Collection 5580 Treatment Console INSTALLATION GUIDE
Preference Collection 5580 Treatment Console INSTALLATION GUIDE 0 WARNING Failure to install the 5580 as described in this installation guide may cause the unit to collapse, resulting in serious injury
More informationTITGEMEYER Tf1673GB(0517)1. GETO City Body Kit with a self-supporting base and without a base Assembly Instructions
TITGEMEYER Tf1673GB(0517)1 with a self-supporting base and without a base All rights reserved. The technical data quoted in this catalogue, performance descrip - tions, recommendations and instructions
More informationFig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7
FSW Installation instructions Track rail 75 x 72 mm 1. Ceiling substructure and installation of the track rail (Fig. 1): The track rail must be bolted over its entire length (including the stacking track
More informationLOWLINE SINGLE FOLD DOWN WALL BEDS
ASSEMBLY INSTRUCTIONS LOWLINE SINGLE FOLD DOWN WALL BEDS Tools Required For Assembly No 2 & No 4 Phillips Head Screwdrivers No 2 Slot Head Screwdriver Hammer Electric Drill (Hammer Drill for Masonry) 6.5mm
More informationSwerve Rack CUSTOM RACKS AVAILABLE
CUSTOM RACKS AVAILABLE Swerve Rack The design of the Swerve mirrors the bike frame, thus providing superior bike support while making it easy to secure both the bike frame and wheel with a standard u-lock.
More informationINSTALLATION INSTRUCTIONS
Tools required for the installation. A. Core Drill 87mm Drill bit B. Tape measure C. Spirit Level D. Marking pen E. Caulking gun F. Cutting Pliers G. Cordless Drill and Philips head bit, 5mm Drill bit.
More informationASSEMBLY AND CARE INSTRUCTIONS JUST FOR KIDS 355
ASSEMBLY AND CARE INSTRUCTIONS VERSION: 8920100 (Revised 06/16) JUST FOR KIDS 355 SALES AND SERVICE spiethamerica.com Canada and International 135 Forestview Road, PO Box 40 Orillia, Ontario, Canada L3V
More informationFUSION JULIETTE BALCONIES FITTING INSTRUCTIONS
FUSION JULIETTE BALCONIES FITTING INSTRUCTIONS The Richard Burbidge FUSION Juliette Balcony System comprises a combination of timber and aluminium rails, glass infill panels and brackets designed for use
More informationSmartView Mounting Frame 3 Wide x 3 Deep Video Wall Display Installation Guide
SmartView Mounting Frame 3 Wide x 3 Deep Video Wall Display Installation Guide WMK-034 This display kit mounts ViewSonic 46 Video Wall displays in a 3 wide by 3 deep landscape configuration. The frame
More informationTrack Rack. * Track Racks are not lockable
The Track Rack s unique staggered, sliding hook design creates the greatest parking efficiency while still providing easy access to any particular bike. When adding or removing a bike to the rack, simply
More informationD. Drill Bolt Holes Through Topper Shell and Bed Rails
A. Check Mounting Kit Check to make sure that all of the following items are included in the mounting kit. Call 515-272-4372 if you need to obtain a part from BrandFX. Double-stick tape (1 roll) White
More informationAdjustable Feet Castors Accessories for Floor Elements
Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible
More informationComponents made of special materials. Floor Elements for Profile St Profile KH. Fastening Elements for Profile KH
Profile Fastening Elements for Profile Floor Elements for Profile Profile KH Fastening Elements for Profile KH Components made of special materials Products in this section Profile 8 x eel profile that
More informationSLIDING MECHANISM TROLLEY CATCH TROLLEY ASSEMBLY FLOOR GUIDE
Set A Set B P7001 Standard Kit FITTING INSTRUCTIONS For use with 44mm thick doors only For Single and Double doors IF INSTALLING A TOUCH LATCH, PLEASE READ THE CORRESPONDING FITTING INSTRUCTIONS FIRST
More informationSteel Frame Assembly
Steel Frame Assembly The Alpha Steel Frame is adaptable as vertical or horizontal bed. Note: A leg connector rod extension bar is required for a horizontal bed. Hardware Card #3 is used for Steel Frame
More informationReplacing the Reciprocator on the SWF Compact Series Machine (601C and 1201C)
Follow the instructions below to replace the reciprocator in the SWF Compact series machines. The tools required can be found in the tool kit that came with the machine. Preparation 1. First, place the
More informationTITAN2-EDGE Public Access Computer Station Dual Track
TITAN2-EDGE Public Access Computer Station Dual Track TITAN2-EDGE Rev A 6/17 Model TITAN2-EDGE ASSEMBLY AND ADJUSTMENT TITAN2-EDGE PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the
More informationFEET, WHEELS, FLOOR FASTENINGS, SUPPORTS
SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT
More informationDeck Mount Installation with Bench
Deck Mount Installation with Bench 1. Mark track with square. 2. Cut tracks with saw. 3. Drill ¼ hole (if needed.) 4. Countersink track. 5. Countersink all track 6. File all track ends. ends. 7. Lay out
More informationPlate 60 ArmourMate. Joint Edge Protection INDUSTRIAL SLAB ON GROUND. Plate 60 AmourMate. Joint Edge Protection
Plate 60 AmourMate Plate 60 ArmourMate INDUSTRIAL SLAB ON GROUND Accommodates large concrete shrinkage Facilities thermal movement Prevents spalling on construction joints Extends the life-cycle of the
More informationManufacturing and installation instruction. Solidare Verso. Pergola awning (bottom mounted)
Manufacturing and installation instruction Solidare Verso Pergola awning (bottom mounted) Solidare Verso pergola awning 11-05-2017 * * A T T E N T I O N * * AVZ accepts no liability for any errors in this
More informationIF INSTALLING ANY OF THE PORTMAN SELF CLOSING SYSTEMS, PLEASE READ THE CORRESPONDING FITTING INSTRUCTIONS SUPPLIED WITH THE CLOSING SYSTEM FIRST
Set A Set B PFD60 Fire Door Kit FITTING INSTRUCTIONS IF INSTALLING ANY OF THE PORTMAN SELF CLOSING SYSTEMS, PLEASE READ THE CORRESPONDING FITTING INSTRUCTIONS SUPPLIED WITH THE CLOSING SYSTEM FIRST SUGGESTED
More informationSales & Service. JFK - Just For Kids. sasportonline.com. 135 Forestview Road 7879 Will Rogers Blvd.
Sales & Service sasportonline.com SA Sport (Canada) SA Sport (U.S.A.) 135 Forestview Road 7879 Will Rogers Blvd. P.O. Box 40 Fort Worth, Texas Orillia, Ontario USA 76140 Canada L3V 6H9 Telephone: (705)
More informationTRADITIONAL GABLE ATTACHED PATIO AND CARPORT. Your complete guide to building an ATTACHED Outback TRADITIONAL GABLE PATIO or CARPORT
TRADITIONAL GABLE ATTACHED PATIO AND CARPORT STRATCO OUTBACK ASSEMBLY INSTRUCTIONS. Your complete guide to building an ATTACHED Outback TRADITIONAL GABLE PATIO or CARPORT BEFORE YOU START Carefully read
More informationINSIDE PANEL NOT SHOWN TO DETAIL ANCHORING SYSTEM
SIX INCH ALPHA MODULE INSTALLATION KEWAUNEE SCIENTIFIC CORPORATION SIX INCH ALPHA MODULE ANCHORING SYSTEM After Alpha module has been set in desired location. Adjust the four adjustment bolts until the
More informationFlexFrame - Storage Components and Skins
FlexFrame - Storage Components and Skins 1/4 Square Drive Ball-Point Hex-Bit Socket 1/8 Short Hex, 1-1/2 Overall Length McMaster Part # 54075A44 Table of Contents Topic Page Storage Components 2 General
More informationTools Required Page 1. KIT CONTENTS: Smoking Shelter Page 1-2 Smoking Shelter Optional Extras Page 3
TM MODUS SHELTER 770 AND 1280 FLAT PACK ASSEMBLY & FIXING INSTRUCTION LEAFLET NOTE: Ensure that all relevant personnel read the points listed below and that a copy is passed on to staff involved with the
More informationASSEMBLY INSTRUCTIONS DIY WALL BED KIT QUEEN BI FOLD DOOR CABINET & MECHANISM. Tools Required For Assembly. 6.5mm Masonry Drill Bit
ASSEMBLY INSTRUCTIONS DIY WALL BED KIT QUEEN BI FOLD DOOR CABINET & MECHANISM Tools Required For Assembly No 2 & No 4 Phillips Head Screwdrivers No 2 Slot Head Screwdriver Hammer Electric Drill (Hammer
More informationVersion 2016_1.1 VICTORIAN ASSEMBLY INSTRUCTIONS. Victorian Vi-23, 34, 36
Version 2016_1.1 VICTORIAN ASSEMBLY INSTRUCTIONS Victorian Vi-23, 34, 36 PRODUCT INFORMATION Dear customer, Thank you for buying a high-quality aluminium greenhouse. REMARKS The drawings in these instructions
More informationSLIDING MECHANISM TROLLEY CATCH TROLLEY ASSEMBLY FLOOR GUIDE
Set A Set B PFD30 Fire Door Kit FITTING INSTRUCTIONS For use with 44mm thick doors only For Single and Double doors IF INSTALLING A TOUCH LATCH, PLEASE READ THE CORRESPONDING FITTING INSTRUCTIONS FIRST
More informationBIKE FILE (301)
B IK E F I L E High Efficiency The Bike File is our most space efficient u-lock compatible product. Sturdy sliding hangers allow nine bikes to be securely stored in an eight-foot section while allowing
More informationInstallation Guide Simplicity 6. v3.5 lu171117
0845 869 6006 www.canoports.co.uk Installation Guide Simplicity 6 v3.5 lu171117 Tools Required Below is a list of tools that you will require to install the Simplicity 6 Canopy or Carport. Cordless Drill
More informationNot including the type of fabric used (clear pvc or shade mesh), there are three main types of side screen.
installation Outrigger side screens are installed as a single stage job when the screens are fitted to a existing structure. However, two stages may be necessary if, for whatever reason, reliable measurements
More informationROOFSAFE ANCHOR & CABLE
Installation Instructions ROOFSAFE ANCHOR & CABLE THE ULTIMATE IN FALL PROTECTION MANUAL Contents Guidelines for Installation 3 Top Bolt Installation 4 Toggle Installation 5 Concrete Installation 6 Component
More informationN. 15th Street, Middlesboro, KY LOCK-N-ROLL INSTALLATION INSTRUCTIONS
1-800-248-7717 1002 N. 15th Street, Middlesboro, KY 40965 LOCK-N-ROLL INSTALLATION INSTRUCTIONS Congratulations on your purchase of a Mountain Tarp Lock-N-Roll tarping system. With tarping systems for
More informationInstallation Manual for Metal Emperor Lockers
P a g e 1 Table of Contents Page General Notes and Tools Required 2-3 Assemble Shelves with Coat Hooks/Coat Rods 4 Fastening Chart 5 Knock Down Locker Assembly (Banks of Three) 6-12 Appendix A: Dress End
More information3.2.3 Rear Door Window and Quarter Window Carrier Assembly
Tighten all bolts. Tighten bolts marked -1- and -2- in specified sequence. Tightening torque: 8 Nm Remaining bolts can be tightened in any sequence. Insert door window -3- through window recess without
More informationDoor window. Front door window, assembly overview
64-50 Door window Front door window, assembly overview 1 - Window channel Pushed onto flange 2 - Door window Removing Page 64-52 Adjusting Page 64-53 3 - Door 4 - Outer window channel Pushed onto flange
More informationInstallation Instruction
Tools Needed for Assembly Stud finder (for wood stud wall) Pencil Mark Electric drill Wood Stud Wall Installation Step 1. Locate the Wood Studs Installation Instruction Drill bit (for wood stud wall) Masonry
More informationPOOL ENCLOSURES LEIA & ALVA. Assembly manual
POOL ENCLOSURES LEIA & ALVA Assembly manual Rev. 07.2017 PARTS LIST Parts for rail installation: Rail Síncsavar screw 1 Plastic Síncsavar anchor 10 50 2 Rail Síncsavar connector 3 Arrest Síncsavar wedge
More informationInstallation Instructions
Supafold Slide Aside System Three Fold Room Divider Installation Instructions Distinctive Doors Ltd Supafold Slide Aside Internal Folding System IMPORTANT: Before proceeding with the installation, and
More informationPocket Door Kit PD1 / PD2 Installation Instructions. Kit Contents.
Pocket Door Kit PD1 / PD2 Installation Instructions Kit Contents. 1, Create Rough Opening In Stud Wall Construct rough opening ensuring all sides are square and level. Rough opening should be; Height =
More informationInsolroll Clutch Operated Shades Installation Instructions Installation Instructions
All clutch operated shades are shipped fully assembled and ready for installation. Mounting screws are not provided. Screws for chain guide installation to meet the child safety standards are provided.
More informationSpring Loaded All Season Roll-Up Doors
Spring Loaded All Season Roll-Up Doors STAND-OFF MOUNTING METHOD INSTALLATION INSTRUCTIONS READ THIS FIRST Carefully examine the crate(s) for damage before opening. If the carton is damaged, immediately
More informationFranklin Mills Stackable Movable Lateral Instructions
Franklin Mills Stackable Movable Lateral Instructions Table of Contents: Table of contents...1 Tools Required...2 Stationary Shelving Assembly...3-7 Mobile Shelving Assembly...8-16 Rail Assembly...8-11
More information121PB - PRO UNEVEN BARS
Sales & Service sasportonline.com Head Office 135 Forestview Road P.O. Box 40 Orillia, Ontario Canada L3V 6H9 Toll Free (800) 563-6479 Phone (705) 325-2274 Fax (705) 325-1485 USA Office 7879 Will Rogers
More informationALUMA-CLASSIC FENCE W1716 & W1720 INSTRUCTION MANUAL
ALUMA-CLASSIC FENCE W1716 & W1720 INSTRUCTION MANUAL Phone: Phone: 1-360-734-3482 On-Line On-Line Technical Technical Support: Support: tech-support@woodstockint.com tech-support@shopfox.biz COPYRIGHT
More informationF-5-1a. Concrete Bollards (Detail 1 of 2) WEIGHT: 166kg. WEIGHT: 227kg. WEIGHT: 113kg. WEIGHT: 212kg
Contents F-5-1a Concrete Bollards F-5-1b Concrete Bollards F-5-2 Concrete Bollards with City Logo F-5-3 Cast Iron Bollards F-5-4 Decorative Steel Bollard F-5-5 Swivel P Gate Steel Bollard F-5-6 Steel Bollard
More information3 wide x 3 deep Video Wall Display Installation Guide
HoverTrack Series 3 wide x 3 deep Video Wall Display Installation Guide VWD-3X3-X462 This display kit mounts NEC X461UN and X462UNS LCD monitors in a 3 wide by 3 deep landscape configuration. The frame
More informationVACUSEAL MODEL 200. HOT TUB PRODUCTS 233 Carrington Road Bethany CT
VACUSEAL MODEL 200 J G F G H L HOT TUB PRODUCTS 233 Carrington Road Bethany CT 06524 860-469-2580 www.vacusealcoverlift.com www.hottubproducts.com Made in USA H K E D C I A P B 10 9 8 7 6 5 4 3 2 1 0 SPAS
More informationLocker Pedestal Installation Instructions
Locker Pedestal Installation Instructions LK-PED-INST-0314r1 Parts List Single Pedestal Back to Back Pedestal Horizontal Support Tube TS-169 Post Flange TS-190 Post Cap Fasteners Provided: #8 x ¾ round
More informationHANDRAIL HEIGHT PER LOCAL CODE AUTHORITY. 6 3/8" [161.9mm]
PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE P-RSAN-INT INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION OF THIS
More informationVACUSEAL MODEL 300 & 400
VACUSEAL MODEL 300 & 400 G L HOT TUB PRODUCTS 2 Toelles Road, Suite 13 Wallingford, CT 06492 860-469-2580 www.hottubproducts.com J G F H H K E D C I A P B 10 9 8 7 6 5 4 3 2 1 0 0 1 Figure 1 2 3 4 SPAS
More informationDrilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2
TOOLS Page Q 2 Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2 Page Q 3 Changeable carbide drill (WHM) Page Q 3/1 Drilling machine Tonisco
More informationEZ-Lock Assembly Manual
ABM International, Inc. EZ-Lock Assembly Manual 1 ABM International, Inc. Series: 1018/1022/1026 V1.0 EZ-Lock Parts List - Structural frame profiles Slotted beam: (Qty. 2) 15.75 Commercial Parts - Liner
More informationPART #MSP-DCCST Flat Panel Tilt Mount
INSTALLATION INSTRUCTIONS PART # Flat Panel Tilt Mount The Flat Panel Tilt Mount is a quick disconnect mounting solution for flat panel displays. The mount features adjustability between 0 and 15 degrees
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationINTRODUCTION. EqunioxRoof.com. Pro Tip
INSTALLATION MANUAL INTRODUCTION The Equinox Louvered Roof System is designed to be installed in an aluminum frame. All these sections are 1/8" thick extruded aluminum. All engineering for this system
More informationM4 Foot Operated Underpinner Instruction Manual
M4 Foot Operated Underpinner Instruction Manual M4 Walker Rd, Bardon Hill, Coalville, Leicestershire LE67 1TU, England Tel. +44 (0)130 1692, Fax +44 (0)130 16929 e mail sales@framerscorner.co.uk M4 Underpinner
More informationINSTALLATION GUIDE. Outback. Flat Attached BEFORE YOU START ADDITIONAL MATERIALS TOOLS REQUIRED. VERAnDAHS PATIOS CARPORTS
INSTALLATION GUIDE Outback VERAnDAHS PATIOS CARPORTS Flat Attached BEFORE YOU START It is important to check your Local Government Authority requirements before the installation of your new Stratco Outback
More informationEcoGlide Sliding Door System
SOLUTIONS FOR TRADE EcoGlide Sliding Door System November 2017 SOLUTIONS FOR TRADE CONTENTS Page 4 Page 5 Page 6-20 2100 Series Floor Guided Sliding Door System 3100 Series Wall Guided Sliding Door System
More informationOXYGEN INSTALLATION. Revision date
12345 1 Hardware List 12345 Flat head wood screw #9 x 7/8 long with #2 Phillips drive, silver Used to attach surfaces and end panels Hex set screw ½-13 x 2 long with 1/4 hex drive, black Used on Legs Hex
More informationTOOLS REQUIRED FOR ASSEMBLY. Rubber Mallet or Plastic Tip Hammer PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER.
TOOLS REQUIRED FOR ASSEMBLY Rubber Mallet or Plastic Tip Hammer Top Cover Support PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER Back Stop Divider Closed 'L' Upright Slotted Reinforcement Support
More informationModel 6100 Illustrated Installation Instructions Contractors Wardrobe
Model 6100 Illustrated Installation Instructions Contractors Wardrobe DESIGNERS MANUFACTURERS 26121 Avenue Hall Valencia, CA 91355 (661) 257-17 Fax: (661) 257-4907 Toll Free: (800) CW-DOORS (800) 293-6677
More informationTONNEAU INSTALLATION INSTRUCTION
TONNEAU INSTALLATION INSTRUCTION Mitsubishi MQ Triton Dual Cab With Headboard, No Sports Bars Clip On Cover July 2015 Current Package includes Part number: STO10642 1 X Tonneau cover 2 x Bar Brackets (300474)
More informationHANDRAIL HEIGHT PER LOCAL CODE AUTHORITY. 6 3/8" [161.9mm]
PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION OF THIS. CONTAINED
More informationInstallation Guide Simplicity 16. V2.9 Lu171117
0845 869 6006 www.canoports.co.uk Installation Guide Simplicity 16 V2.9 Lu171117 Tools Required Below is a list of tools that you will require to install the Simplicity 16 Canopy or Carport. Cordless Drill
More informationGROWING BETTER THROUGH DESIGN. 6ft Lean-To LEAN-TO. Assembly Instructions 04/02
GROWING BETTER THROUGH DESIGN 6ft Lean-To LEAN-TO Assembly Instructions 04/02 6ft Lean-To Greenhouse Base Plan Introduction/Tools/Contents / / Contents This is a copy of our Lean-To greenhouse base plan.
More informationMounting a BalanceBox 400 to a brick wall
Unpack the BalanceBox 400 and remove the Wall frame cover and its bag of screws. Slide the cover out at the top. NOTE: the cover is NOT included with the BalanceBox 400H LOCK SCREW HOLE MOBILE STAND MOUNTING
More informationMay 14, Installation Manual
May 14, 2012 Installation Manual Contents MAG TRACKER Components...1 Mount Installation...7 Module Installation & Grounding...11 Maintenance...14 Warranty......14 Contact Information......14 May 14, 2012
More informationYour order will be shipped with the supports and rail components packaged inside the ramp package. Each accessory package is labeled.
instructions About Your Order. Your order will be shipped with the supports and rail components packaged inside the ramp package. Each accessory package is labeled. Check the Order Before the Carrier leaves!
More informationAssembly and Installation Guide
The Easy Hang Closet Solution SM Install Your elfa In An Instant. Enjoy The Benefits For A Lifetime. Basic Tools For elfa Assembly and Installation Level Hand or Power Drill Drill Bits 1/8", 3/8", 5/16"
More informationInstallation Guide. Evolve bi-fold. 8. Door restrictor- optional p9. 1. Before you start p2. 9. Adjustment. 2. Measuring and surveying p2
Evolve bi-fold Installation Guide 1. Before you start p2 8. Door restrictor- optional p9 2. Measuring and surveying p2 3. Configuration details p4 4. Installation p5 5. Glazing p5 6. Glazing packer details
More informationLevel Railing. Installation Guide. v2.5 W W W. S O L U T I O N S A L U M I N U M. C O M
Level Railing Installation Guide Top Rail Bottom Rail Aluminum Baluster 2x Bottom Bracket 1x Rail Support #909915 Kit Includes: 1 - Top Rail (with Baluster Connectors installed) 1 - Bottom Rail (with Baluster
More informationFOLDING DOOR - FOR FACTORY ASSEMBLED JAMBS WITH APPLIED SILL
FOLDING DOOR - FOR FACTORY ASSEMBLED JAMBS WITH APPLIED SILL READ SPECIFIC INSTALLATION INSTRUCTIONS COMPLETELY BEFORE STARTING ANY INSTALLATION Failure to install and maintain our product according to
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationTable of Content. Sayl Disassembly for Recycling
Y Sayl Disassembly for Recycling Table of Content 1. Work Chair Disassembly... 2 2. Side Chair Disassembly...17 3. Work Stool Footring Disassembly... 22 1 Y Sayl Disassembly for Recycling Work Chair Disassembly
More information