BL500 Series Brake Lathe Variable and Single Speed Combination Lathes. Change from servicing rotors to drums in seconds!
|
|
- Bertram Golden
- 5 years ago
- Views:
Transcription
1 BL500 Series Brake Lathe Variable and Single Speed Combination Lathes Change from servicing rotors to drums in seconds!
2 Key features at a glance Digi-Cal Option Instantly measures drum or rotor dimensions Helps technicians quickly determine total indicated runout Choice of Lathe Tooling Positive rake Negative rake Includes positive rake tooling Durable negative rake tooling available as an option Adjustable Feed Rate Self-Aligning Nut Option* Disc/Drum Con Dial fast for rapid removal or slow for final surface finish One-cut pass capable Speeds setup Prevents overtightening and mounting errors Eliminates po crashing of Warning indic * Option depending on selected model.
3 Adjustable Spindle Speeds Provides correct speed for all size workpieces No tools required Twin Work Lamps BL505 shown with optional features Adjustable lamps illuminate both sides of workpiece Includes built-in deflector shield trol Lockout Clamp Screw Built-in Tool Tray tential machine ation reminder Allows quick setup change from rotors to drums Keeps tools within easy reach
4 Quick setup speeds brake servicing Change from rotors to drums in seconds! Change from rotors to drums by loosening clamp screw,... set up drum service assembly removing rotor setup, rotating and extend drum boring bar. twin cutter... Fastest in industry! Choose the brake lathe tooling to suit your needs Positive rake (standard) Provides faster cutting and reduced chatter Features 3 cutting tips Negative rake (optional) More durable and longer life Features 6 cutting tips Spindle speed adjustment made simple Quickly adjustable between three working speeds No tools necessary Easy to access Protective housing keeps motor safe from metal chips and debris
5 Digi-Cal instantly measures workpiece dimensions Quickly determines if workpiece should be discarded prior to machining Enables tech to quickly determine total indicated runout Eliminates manual calculation errors Displays measurements in inches or millimeters Determines depth of cut quicker and more accurately than slip collar method Helps technicians perform one-cut service with confidence No handheld tools required Measures rotor thickness Digi-Cal helps the technician determine the amount of material to remove for a one-cut resurfacing operation. Measures drum diameter Quick calibration for greater accuracy Easy to perform Calibrate drum and rotor procedures in seconds Prevents accidental removal of excess material Calibrates diameter Calibrates thickness
6 Rotor Silencer Chain Quick Chuck Small Drums nl Drum Silencer Band (car) (truck) (Non-Vented) Rotor Silencer Band (Non-Vented) Rotor Silencer Quick Chuck Quick Chuck Rotor Silencer (Vented) Heavy-duty bench option * makes brake service fast and easy Heavy gauge, all-steel construction gives extra stability Rear backboard stores frequently-used adaptors within easy reach Large chip collection funnel keeps debris off the floor Optional dust containment system** protects air quality and keeps work area clean Form 4076T, 3/02 Supersedes Form 5/99 BL500 Operation Tips Maintenancee Clean and deburr arbor shaft and ve ical face, clamp cups, cones and all other adaptors, daily Clean tool Holders, daily BL500 Set Up Configuration Guide Wipe down adaptors and machined surfaces with anti-rust preventative, weekly TEL (314) FAX (314) http: // Lubricate main support Shaft grease fitting, annually (left side main housing) info@hunter.com Lubricate drum boring bar grease fitting, annually (inside feed assembly cover) Hubless Rotor Troubleshooting Problem Symptom Solution 1 Excess arbor runout 2 Dirt or rust on locking taper Bent arbor Arbor nut too tight 3 4 Taper on arbor and inside spindle must be cleaned before arbor is installed. Replace arbor. It is not recommended to use a wrench to tighten Workpiece. Hand tighten only. Excess workpiece Composite Rotor Dirty or warped workpiece runout Dirty or dinged adaptors 1 2 Worn or chipped insert Hubless Drum Insert loose in tool holder All rust, grease and dirt must be cleaned from mounting surfaces of workpiece. Adaptors must be kept clean. Reface or replace any damaged adaptors. 3 Rotate or replace insert as needed. Insert must be securely tightened into holder. Poor or surface finish 1 Tool holder loose in boring bar Dirt and chips under insert 2 and tool holders Tool holder must be securely locked into boring bar. Clean tool holder and boring bar each time 3 4 insert is rotated or insert holder is repositioned. Replace insert if worn. Hubbed Rotor Too high of a feed rate No stabilizer used Too high of a spindle speed Chatter Silencers Improper mounting techniques Coarse Hubbed feed Drum rates are used for roughing passes and fine feed rates are used for finish passes. Install proper stabilizer for workpiece, see stabilizers on other side. Refer to Spindle Speed Selector Chart or Operation Manual for recommended speeds. Use the largest clamping cups possible and use proper adaptors for composite pieces. Bench includes a convenient document holder for operation manual, application charts and other reference materials. Extra storage available Optional storage drawer ( ) allows expansion of tool and accessory storage. BL505D-AB shown with HunterPro Level 4 Adaptor Kit, optional storage drawer and Dust Containment System**. * Option depending on selected model ** Not compatible with 1 7/8 arbor kits
7 Expand the range of your vehicle applications with additional accessories from Hunter Hunter Passenger Car and Light Truck Adaptor Kits Customize your Hunter BL500 series lathe to match your service needs. Select the appropriate adaptor kit to service most rotors, drums and flywheels. HunterPro Passenger Car Adaptor Kit Consists of hubbed and hubless adaptors covering a whole wide range of applications fitting most passenger car rotors, drums and flywheels, including composites. HunterPro Dual QuickChuck Adaptor Kit Consists of hubbed and hubless adaptors and three-jaw chuck mounting system. Covers a wide range of applications for most rotors, drums and flywheels for passenger cars, light trucks and larger light trucks. HunterPro Elite Cone Adaptor Kit Consists of hubbed and hubless adaptors covering a wide range of applications for most passenger cars, light truck and larger light trucks, including composites Wrenchless self-aligning nut* Eliminates over-torquing arbor nut Works as arbor spacer and nut Dual QuickChuck adaptor Ideal for use with hubless drums Quick setup with unparalleled centering ability NEW! * Included standard in BL505-A and BL505-AB lathe packages.
8 Specifications * 40 Rotor Diameter: 6" to 22" Maximum Width: 5-3/8" Maximum Thickness: 2" Drum Diameter: 6" to 24" Maximum Width: 8" Maximum Weight on 1" arbor: 200 lbs. Spindle Speed(s): BL505: 85, 110, 175 rpm BL501: 155 rpm Feed Rate: BL505:.002 to.014 in/rev (infinitely variable) BL501: in/rev. Motor: 1.5 hp Power Requirements: 115/230 V, 15/7.5 amp 50/60 Hz, 1ph Shipping Weight: 525 lbs. (approx.) * Some specifications may vary depending upon workpiece configurations or may require optional adaptors. Because of continuing technological advancements, specifications, models and options are subject to change without notice. Be sure to check out other Hunter literature for more quality products from Hunter Engineering. BL500 series lathe packages ** Basic Packages BL505 Lathe with basic adaptors Includes combination brake lathe with standard accessory kit [ ]. HunterPro Packages BL505-A HunterPro lathe package Package contains combination brake lathe and Standard HunterPro accessory kit [ ]. Adaptors NOT included. BL505-B Lathe with bench and basic adaptors Includes combination brake lathe, bench with backboard, chip tray, storage hooks and standard accessory kit [ ]. BL505-AB HunterPro lathe package with bench Includes BL505 combination brake lathe, bench with backboard, chip tray, storage hooks and Standard HunterPro accessory kit [ ]. Adaptors NOT included. ** To order Hunter s Digi-Cal measurement option, add D after the model number (e.g., BL505-D). Single speed lathes can be ordered by requesting BL501 instead of BL SAP5M.43 Copyright 2014, Hunter Engineering Company Form 3937-T, 08/14 Supersedes 3937-T, 06/12
BL500 Series Brake Lathe Variable and Single Speed Combination Lathes
BL500 Series Brake Lathe Variable and Single Speed Combination Lathes Key features at a glance Twin Work Lamps Adjustable lamps illuminate both sides of workpiece Includes built-in deflector shield Self-Aligning
More informationBL500 Series Brake Lathes Variable and Single Speed Combination Lathes. Change from servicing rotors to drums in seconds!
BL500 Series Brake Lathes Variable and Single Speed Combination Lathes Change from servicing rotors to drums in seconds! BL505 Combination Brake Lathe 11 9 10 1 4 2 BL505 shown with optional Digi-Cal Auto
More informationBL500 Series Brake Lathes
BL500 Series Brake Lathes Variable and Single Speed Combination Lathes Form 3937T, 04/04 Supersedes 3937T, 05/02 Change From Rotors to Drums in Seconds! BL505 Combination Brake Lathe 11 9 10 1 4 2 BL505
More informationBL501/505 Drum/Rotor Lathe
Form 4461T, 04-02 Supersedes Form 4461T, 06-99 OPERATION INSTRUCTIONS BL501/505 Drum/Rotor Lathe Copyright 1999 2002 Hunter Engineering Company OWNER INFORMATION Model Number Serial Number Date Installed
More informationINSTALLATION AND OPERATION MANUAL
Forward this manual to all operators. Failure to operate this equipment as directed may cause injury or death. INSTALLATION AND OPERATION MANUAL MODEL RL4500 COMBINATION BRAKE LATHE FOR RESURFACING AUTOMOBILE
More informationSB-32V Drill Press OWNERS MANUAL
724 Robbins Road, Grand Haven, MI 49417 Phone: 616-842-7110 800-937-3253 Fax: 616-842-0859 800-846-3253 Web: www.dakecorp.com E-mail: customerservice@dakecorp.com SB-32V Drill Press OWNERS MANUAL FOR YOUR
More informationMACHINING BRAKE DRUMS AND ROTORS
104 MACHINING BRAKE DRUMS AND ROTORS Figure 104-1 surface. Types of brake drums. Regardless of the design, all types use cast iron as a friction Figure 104-2 The airflow through cooling vents helps brakes
More information3850, Drum & Disc Brake Lathes. Installation Instructions Operating Instructions Safety Instructions Maintenance Instructions
3850, 3860 Drum & Disc Brake Lathes Installation Instructions Operating Instructions Safety Instructions Maintenance Instructions READ these instructions before placing unit in service. KEEP these and
More informationC9370C Drum&Disc Brake Lathes Handbook
C9370C Drum&Disc Brake Lathes Handbook Installation Instructions Operating Instructions Safety Instructions Maintenance Instructions READ these instructions before placing unit in service.keep these and
More informationHM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,470.00 $2,840.50 ORDER CODE: M123 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
More informationHEAVY DUTY BENCH GRINDERS
HEAVY DUTY BENCH GRINDERS BGC-6 (240153) / BGC-8 (240154) Heavy duty construction for maximum service life CSA electrics for safety and reliability All ball bearing construction Steel wheel covers with
More informationEEBR308A Brake Lathes Installation Instructions Operating Instructions Safety Instructions Maintenance Instructions
EEBR308A Brake Lathes Installation Instructions Operating Instructions Safety Instructions Maintenance Instructions READ these instructions before placing unit in service. KEEP these and other materials
More informationHM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand
HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand Ex GST Inc GST $3,790.00 $3,280.00 $4,358.50 $3,772.00 Special Ends 30/06/2018
More informationTABLE OF CONTENTS MODEL 8750/8800 OCL
TABLE OF CONTENTS MODEL 8750/8800 OCL Warranty Registration...2 Warranty...3 Vehicle Preparation...4 Attaching the Lathe using Universal Plates (8750)...5 Threaded Plates (RED)...6 Unthreaded Plates (BLUE)...7
More informationHM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,600.00 $2,860.00 ORDER CODE: M124 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
More informationTB & SB Series Drill Presses
TB & SB Series Drill Presses OWNERS MANUAL BENCH AND FLOOR DRILL PRESS TB-16 Series & SB-16-25-32-Series FOR YOUR OWN SAFETY AND OPTIMUM OPERATION READ INSTRUCTION MANUAL BEFORE OPERATING DRILL PRESS RETAIN
More information3000, 4000, 4100, 7500
3000, 4000, 4100, 7500 Drum & Disc Brake Lathes Installation Instructions Operating Instructions Safety Instructions Maintenance Instructions READ these instructions before placing unit in service. KEEP
More informationTU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head
TU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head Package Deal Ex GST Inc GST $3,980.00 $4,577.00 Package Contents - SAVE $402.50 (Inc) 1 x L691
More informationProduct Brochure For L682D. Description. Features. Auckland: (09)
AL-336D DELUXE - Centre Lathe 300 x 900mm Turning Capacity Includes Digital Readout, Quick Change Toolpost, Leadscrew Covers, Foot Brake & Cabinet Stand Ex GST Inc GST $5,200.00 $5,980.00 ORDER CODE: MODEL:
More informationEllis Drill Press Model 9400
Ellis Drill Press Model 9400 Instruction Manual POWER FEED DRILL PRESS Infinitely Variable Speed Model 9400 Operation Manual February 17, 2006 CONTENTS Page Number Preface 2 Installation Instruction 2
More informationC9350C/C9370C Drum&Disc Brake Lathes Handbook
C9350C/C9370C Drum&Disc Brake Lathes Handbook Installation Instructions Operating Instructions Safety Instructions Maintenance Instructions READ these instructions before placing unit in service.keep these
More informationAL-320G - Bench Lathe, Stand & Tooling Package Deal 320 x 600mm Turning Capacity
AL-320G - Bench Lathe, Stand & Tooling Package Deal 320 x 600mm Turning Capacity Ex GST Inc GST $3,200.00 $3,680.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm): Spindle Bore (mm):
More informationHM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System
HM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System Ex GST Inc GST $5,500.00 $6,325.00 ORDER CODE: MODEL: Digital Readout: Type: Table Size
More informationSTC Hydraulic grinding milling machine for cylinder heads and blocks. BERCO S.p.A. A Company of ThyssenKrupp
STC 361-1300 Hydraulic grinding milling machine for cylinder heads and blocks A Company of ThyssenKrupp BERCO S.p.A. The machine and its executions - from grinding wheel to tool: 1 - from tool to milling
More informationVhu. Universal Boring Heads Vhu 2 1/8, 3 1/8, 4 7/8, 6 ¼. Vhu. Instruction Manual No.:
Instruction Manual No.: 2420304 Vhu Vhu Universal Boring Heads Vhu 2 1/8, 3 1/8, 4 7/8, 6 ¼ Producer: Moskevska 63 101 00 Praha 10 Vrsovice Czech Republic Phone: +420 246 002 249 Fax: +420 246 002 335
More informationHM-54GV - Turret Milling Machine Inverter Variable Speed, Geared Head Horizontal & Vertical
HM-54GV - Turret Milling Machine Inverter Variable Speed, Geared Head Horizontal & Vertical Ex GST Inc GST (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System $7,250.00 ORDER
More informationDisc Brake Systems. GWS : Brake Rotor Resurfacing Procedures Instructor Version
Disc Brake Systems GWS 155 08: Brake Rotor Resurfacing Procedures Instructor Version Name: Learning Outcome Inspect and recondition disc brake rotors. Prerequisites P553 M512A GWS 155 07 553 TW01 Required
More informationAL Centre Lathe 300 x 900mm Turning Capacity Includes Cabinet Stand
AL-336 - Centre Lathe 300 x 900mm Turning Capacity Includes Cabinet Stand Ex GST Inc GST $4,150.00 $4,565.00 ORDER CODE: MODEL: L682 AL-336 Swing Over Bed (mm): 300 Distance Between Centres (mm): 900 Spindle
More informationHM-48 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column, Power Feed & Stand
HM-48 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column, Power Feed & Stand Ex GST Inc GST $4,350.00 $3,990.00 $4,785.00 $4,389.00 Special
More informationMODEL H " BYRD SHELIX CUTTERHEAD INSTRUCTIONS
MODEL H9291 12" BYRD SHELIX CUTTERHEAD INSTRUCTIONS The Model H9291 12" Byrd Shelix cutterhead is designed to replace the straight-knife cutterhead on the Grizzly jointer Model G0609. The total procedure
More informationMotor Power (kw / hp): Voltage / Amperage (V / amp): Shipping Dimensions (L x W x H) (cm): Nett Weight (kg): Features
AL-356V - Centre Lathe 356 x 1000mm Turning Capacity - 51mm Spindle Bore Includes Digital Readout, Quick Change Toolpost & Electronic Variable Speed With Digital Readout Ex GST Inc GST $7,150.00 $7,865.00
More informationInventory (Figure 2)
MODEL T10127 12" SPIRAL CUTTERHEAD INSTRUCTIONS The Model T10127 indexable insert spiral cutterhead is designed to replace the straightknife cutterhead from the Grizzly jointer Model G0609. The total procedure
More informationHM-50 - Turret Milling Machine Package with Digital Readout & Tooling Accessories (X) 600mm (Y) 220mm (Z) 340mm
HM-50 - Turret Milling Machine Package with Digital Readout & Tooling Accessories (X) 600mm (Y) 220mm (Z) 340mm ORDER CODE: MODEL: Digital Readout: Type: Table Size (mm): Column Type: Spindle Taper - Vertical:
More informationCL-38A - Centre Lathe 410 x 1000mm Turning Capacity - 52mm Spindle Bore Includes Digital Readout & Quick Change Toolpost
CL-38A - Centre Lathe 410 x 1000mm Turning Capacity - 52mm Spindle Bore Includes Digital Readout & Quick Change Toolpost Ex GST Inc GST $9,490.00 $10,439.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance
More informationQLD Schools / TAFE - AL-356 Centre Lathe with Digital Readout - Includes Tooling Package 356 x 1000mm
QLD Schools / TAFE - AL-356 Centre Lathe with Digital Readout - Includes Tooling Package 356 x 1000mm Please Call ORDER CODE: K8710D NSW Contract No.: ~ QLD Contract No.: MODEL: Digital Readout: ~ Schools/TAFE
More informationTU-3008G - Opti-Turn Bench Lathe 300 x 700mm Turning Capacity Geared Head-Stock & Enclosed Gearbox
TU-3008G - Opti-Turn Bench Lathe 300 x 700mm Turning Capacity Geared Head-Stock & Enclosed Gearbox Ex GST Inc GST $3,460.00 $3,979.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm):
More informationHeadquarters : 888 Homu Road, Hsinchuang, Shengang, Taichung, Taiwan E
YEONG CHIN MACHINERY INDUSTRIES CO., LTD Headquarters : 888 Homu Road, Hsinchuang, Shengang, Taichung, Taiwan sales@ GENERAL TEL : 886-4-2562-3211 SERVICE TEL : 886-4-2561-2965 FAX : 886-4-2562-6479 FAX
More informationTM-1960G - Centre Lathe 480 x 1500mm Turning Capacity - 80mm Spindle Bore Includes Digital Readout
TM-1960G - Centre Lathe 480 x 1500mm Turning Capacity - 80mm Spindle Bore Includes Digital Readout Ex GST Inc GST $23,900.00 $27,485.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres
More informationEllisSaw.com. EllisSaw.com P.O. Box Verona, WI
P.O. Box 9019 Verona, WI 9-019 GENERAL OPERATING & SAFETY INSTRUCTIONS * READ INSTRUCTIONS BEFORE USE * CAUTION: Disconnect power supply cord from power source when doing repair work or changing belt.
More informationWARNING! Read and understand the entire instruction manual before attempting set-up or operation of this machine!
! WARNING! Read and understand the entire instruction manual before attempting set-up or operation of this machine! 1. This machine is designed and intended for use by properly trained and experienced
More information17 Floor Drill Press. Operator s Manual. Record the serial number and date of purchase in your manual for future reference.
30-230 17 Floor Drill Press Operator s Manual Record the serial number and date of purchase in your manual for future reference. Serial Number: Date of purchase: For technical support or parts questions,
More informationTU-3008G-20M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-20AV Mill Head
TU-3008G-20M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-20AV Mill Head Package Deal Ex GST Inc GST $3,850.00 $4,235.00 Package Contents - SAVE $209.00 (Inc) 1 x L691
More informationVSG4720. balancing. block machining. boring. cleaning. crankshaft. cylinder head machining. flywheel grinders. honing. motorcycle small engine
TM engine rebuilding equipment balancing block boring cleaning crankshaft cylinder head flywheel grinders honing motorcycle small engine surfacing center center versatility New capabilities Tooling adapters
More informationLathe Accessories. Work-holding, -supporting, and driving devices
46-1 Lathe Accessories Divided into two categories Work-holding, -supporting, and driving devices Lathe centers, chucks, faceplates Mandrels, steady and follower rests Lathe dogs, drive plates Cutting-tool-holding
More informationThe ultimate affordability in valve seat machining
The ultimate affordability in valve seat machining SG7 cylinder head seat & guide machine Light Weight Work Head The SG7 has a light weight work head for extremely fast and accurate centering for the ultimate
More information3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit
More informationOPERATION AND MAINTENANCE HANDBOOK D407270XA
OPERATION AND MAINTENANCE HANDBOOK D407270XA vers. 1.0 Thank you for choosing one of Silca s high quality key cutting machines. This machine has been designed, tested and produced in our factory using
More informationAL-960B - Centre Lathe 305 x 925mm Turning Capacity Includes Digital Readout & Cabinet Stand
AL-960B - Centre Lathe 305 x 925mm Turning Capacity Includes Digital Readout & Cabinet Stand Ex GST Inc GST $5,690.00 $6,259.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm): Spindle
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in
More informationPage 1. SureMotion Quick-Start Guide: LARSACC_QS 1st Edition - Revision A 03/15/16. Standard Steel Bolt/Screw Torque Specifications
R K C T I Repair Kit Product Compatibility Repair Kit # Linear Actuator Assembly # LARSACC-013 LARSACC-014 LARSD2-08T12BP2C (12-in travel) LARSD2-08T24BP2C (24-in travel) C P I R K 1 ea Ball Screw with
More information24" x 24" OSCILLATING SPINDLE MANUAL
24" x 24" OSCILLATING SPINDLE MANUAL LAGUNA TOOLS 2072 Alton Parkway Irvine, California 92606 Ph: 800.234.1976 www.lagunatools.com 2018, Laguna Tools, Inc. LAGUNA and the LAGUNA Logo are the registered
More informationSAVE THIS FOR FUTURE REFERENCE THIS PRODUCT IS FOR PROFESSIONAL LABORATORY USE ONLY USER'S MANUAL
DENTAL, INC. TECHNICAL BULLETIN Q827-022510 5860 FLYNN CREEK ROAD READ ALL INSTRUCTIONS P.O. BOX 106 BEFORE PROCEEDING COMPTCHE, CALIFORNIA, U.S.A. 95427 SAVE THIS FOR FUTURE REFERENCE www.wellsdental.com
More informationTroubleshooting for Milling Chuck. Details of the trouble Cause Solution / Countermeasures
TROUBLESHOOTING 571 Troubleshooting Troubleshooting for Milling Chuck Details of the trouble Cause Solution / Countermeasures Tool cannot be held Tool shank diameter should be within h7 tolerance. Tool
More informationWOOD LATHES. Woodworking Equipment. sales hotline Wood Lathe 1 Metre Starter Kit Variable Speed Midi Wood Lathe Cast Iron
01488 Wood Lathe 1 Metre Starter Kit The heavy-duty ½hp induction motor gives smooth reliable performance and means this lathe is ideal for both spindle and faceplate turning. This machine is ideal for
More informationCADET Line Boring Machine And Accessories Catalogue
CADET Line Boring Machine And Accessories Catalogue Portable - Powerful - Flexible - Easy to Use 1 CADET Line Boring Machine This general use line boring machine is perfect for contractors who are concerned
More information3850, Drum & Disc Brake Lathes. Parts Identification
3850, 3860 Drum & Disc Brake Lathes Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for
More informationAL-960B - Centre Lathe 305 x 925mm Turning Capacity Includes Cabinet Stand
AL-960B - Centre Lathe 305 x 925mm Turning Capacity Includes Cabinet Stand Ex GST Inc GST $4,690.00 $5,159.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm): Spindle Bore (mm): Swing
More informationTU-2004V - Opti-Turn Bench Lathe 200 x 300mm Turning Capacity Electronic Variable Speeds
TU-2004V - Opti-Turn Bench Lathe 200 x 300mm Turning Capacity Electronic Variable Speeds Ex GST Inc GST $1,150.00 $1,265.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm): Spindle
More information4000SP Drum & Disc BRAKE LATHE
4000SP Drum & Disc BRAKE LATHE Installation Instructions Operating Instructions Safety Instructions Maintenance Instructions with Parts Identification READ these instructions before placing unit in service.
More informationDRILLING CATALOG. GRAINGER.COM/CHOICE l Grainger
DRILLING CATALOG GRAINGER.COM/CHOICE l 1.800.Grainger DRILL PRESSES BENCH fact sheet 8" BENCH DRILL PRESS Dayton's light duty drilling machine combines performance and economy into one. It s an ideal choice
More informationModel SQM-2AC Squaring Module Rev TABLE OF CONTENTS
92-0714 Rev. 970428 Model SQM-2AC Squaring Module TABLE OF CONTENTS CUSTOMER MESSAGE Inside Front Cover SAFETY PRECAUTIONS 3 GENERAL DESCRIPTION 6 SPECIFICATIONS 7 MAINTENANCE 8 OPERATION 9 CUTTING SPEEDS
More informationHM-32 - Mill Drill - Belt Drive (X) 540mm (Y) 190mm (Z) 410mm
HM-32 - Mill Drill - Belt Drive (X) 540mm (Y) 190mm (Z) 410mm On Sale Ex GST Inc GST $1,850.00 $1,690.00 $2,035.00 $1,859.00 ORDER CODE: M121 MODEL: Digital Readout: HM-32 Optional Type: Vertical Table
More informationSPIDA SAW OPERATIONS MANUAL
SPIDA SAW OPERATIONS MANUAL CM SERIAL NUMBER. OCTOBER 2000 CONTENTS Page description 1.) Contents 2.) Safety First 3.) CM Overview 4.) CM Specifications 5.) CM Installation 6.) CM Operation Setting the
More informationTOOLS AND INSTALLATION
TOOLS AND INSTALLATION Safe, leak-free operation of any high-pressure system is dependent on correctly prepared and installed connections. This section outlines proper instructions for the machining and
More informationHolemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
More informationEEBR312A Brake Lathes Parts Identification
EEBR312A Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
More informationThe Speed of Live and the Accuracy of Fixed
The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.
More informationMODEL T " HELICAL CUTTERHEAD INSTALLATION INSTRUCTIONS
MODEL T27696 12" HELICAL CUTTERHEAD INSTALLATION INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction The Model T27696 indexable
More informationGeneral Safety and Maintenance Manual
General Safety and Maintenance Manual 3 H.P HORIZONTAL GRINDERS CAPACITY -6 Inch (150 mm) or 8 Inch (200 mm) Type 1 Wheels -Any Type 16, 17, 17R, 18 or 18R Cone Wheels w/ 5/8-11 Mounting 3 H.P HORIZONTAL
More informationCOMPONENTS (FIGURE-1):
INSTRUCTION SHEET VEHICLE STABILIZATION BASE SET KIT PN: 22-796303 INCLUDES: 22-796331, 22-796161, 22-797042E KIT PN: 22-796309 INCLUDES: 22-796308, 22-796161, 22-797042E COMPONENTS (FIGURE-1): 1. VSK
More information8" BENCH SHEAR INSTRUCTIONS. Item #20198
8" BENCH SHEAR INSTRUCTIONS Item #20198 Your EASTWOOD 8 BENCH SHEAR for metal cutting is designed for quickly and cleanly cutting mild steel, aluminum and other metals. Torque-amplifying, compound linkage
More informationV-Turn 410/ PRECISION LATHE
PRECISION LATHE Page 2. Highlights Page 3. Machine construction and feed system Page 3. Main spindle drive Page 4. Toolpost Page 4. Tailstock and auxiliary systems Page 5. 3 Axis Digital Read Out - X.pos
More informationINSTALLATION INSTRUCTIONS Product No. MULTI-FIT PICK-UP
INSTALLATION INSTRUCTIONS Product No. You can take it with you. PLYMOUTH, MICH. MULTI-FIT PICK-UP 37034 SMALL PARTS PACKAGE 37424 WARNING: DO NOT LUBRICATE THREADS, BOLT FAILURE MAY OCCUR DUE TO OVER TIGHTENING.
More informationTurnado 280. Turnado 280. Lead Screw and Feed Shaft Lathe. Including 3-axis position indicator.
Lead Screw and Feed Shaft Lathe Including 3-axis position indicator Center width up to 115 inch Turning diam. over bed Removable bridge for machining of large diameters Stop spindle with four adjustable
More information3-1/4 HP VARIABLE SPEED PLUNGE ROUTER
IMPORTANT INFORMATION 2-YEAR LIMITED WARRANTY FOR THIS PLUNGE ROUTER KING CANADA TOOLS OFFERS A 2-YEAR LIMITED WARANTY FOR NON-COMMERCIAL USE. 3-1/4 HP VARIABLE SPEED PLUNGE ROUTER PROOF OF PURCHASE Please
More informationMaintenance Information
16601023 Edition 2 January 2014 Air Impact Wrench 2705P1 Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these
More informationMODEL T /2-TON ARBOR PRESS INSTRUCTIONS
MODEL T27033 1/2-TON ARBOR PRESS INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction This arbor press is designed to perform
More informationLathe Authorization:( Authorization will take 2.5 hours- 3 hours depending on the person) 1 1/2 hours of demo /2 hours of hands on.
DISCLAIMER: I am giving this instruction for free. It is not a comprehensive treatment of the subject matters being discussed. Although I do my best to be as accurate and complete as possible, I may leave
More informationVARIABLE SPEED WOOD LATHE
MODEL MC1100B VARIABLE SPEED WOOD LATHE INSTRUCTION MANUAL Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference. Version: 2015.02.02
More informationPERFORMANCE RACING AND ENGINE REBUILDING MACHINERY AND EQUIPMENT
PERFORMANCE RACING AND ENGINE REBUILDING MACHINERY AND EQUIPMENT F8A F8A with Big Block Merlin Features The F Series Boring Machines are unlike anything else available to the automotive and diesel engine
More informationVERSAtoolTM SAE J533 & SAE J1453. Safety and Operating Manual
VERSAtoolTM Mechanically Assisted / Manual Tube End Flare & Flange Machine SAE J533 & SAE J1453 Safety and Operating Manual I. Safety Instructions................................. Page 2 II. Specifications.....................................
More informationTrade of Toolmaking. Module 2: Turning Unit 8: Concentric Turning (4-jaw) Phase 2. Published by. Trade of Toolmaking Phase 2 Module 2 Unit 8
Trade of Toolmaking Module 2: Turning Unit 8: Concentric Turning (4-jaw) Phase 2 Published by SOLAS 2014 Unit 8 1 Table of Contents Document Release History... 3 Unit Objective... 4 Introduction... 4 1.0
More informationHAFCO METALMASTER AL-335. Centre Lathe. 300 x 910mm Turning Capacity. Product Brochure
Product Brochure L183 HAFCO METALMASTER AL-335 Centre Lathe 300 x 910mm Turning Capacity Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-10-08 L183.pdf Headstock Speed
More informationGeology, Prospectors, Mining, Metallurgy, Assaying, Environmental, Geotechnical
LEGEND INC. Geology, Prospectors, Mining, Metallurgy, Assaying, Environmental, Geotechnical 988 Packer Way Sparks, NV 89431 Tel: (786) 786-3003 Fax: (775) 786-3613 Email: info@lmine.com Web: www.lmine.com
More informationHow to Calibrate a CNC Machine's Positioning System
How to Calibrate a CNC Machine's Positioning System Guide to calibrating the Haas wireless intuitive probing system. Written By: Kim Payne 2018 gunnerautomotive.dozuki.com/ Page 1 of 20 INTRODUCTION Attention:
More information6 BLADE CUTTER MODEL # PCC-6 OPERATION MANUAL
4511 WAYNE AVENUE PHILADELPHIA PA 19144 TEL: 888-800-2663 FAX: 800-582-9643 6 BLADE CUTTER MODEL # PCC-6 OPERATION MANUAL CONTENTS I. INTRODUCTION TO BOND PCC-6 / MACHINE SPECIFICATIONS II. SAFETY PRECAUTIONS
More informationD R I L L - G R I N D E R S BL 13D-2
D R I L L - G R I N D E R S BL 13D-2 2 Table of contents 1. General safety rules for all machines 3 2. Additional safety rules 4 3. Features 4 4. Specification 4 5. Operation 4 5.1 Assemble the fixture
More information2-Station, Tabletop POLISHING LATHE. w/whisper-quiet, Environmentally-Safe Exhaust System
2-Station, Tabletop POLISHING LATHE w/whisper-quiet, Environmentally-Safe Exhaust System Individual Lighting and Suction Switches Extra-Large Work Stations for Easy Polishing of Any Sized Case High-Intensity
More informationSALES CUSTOMER SERVICE TECHNICAL ASSISTANCE CALL TOLL-FREE:
DENTAL, INC. TECHNICAL BULLETIN U802-022510 5860 FLYNN CREEK ROAD READ ALL INSTRUCTIONS P.O. BOX 106 BEFORE PROCEEDING COMPTCHE, CALIFORNIA, U.S.A. 95427 SAVE THIS FOR FUTURE REFERENCE THIS PRODUCT IS
More informationHAFCO METALMASTER HM-51. Turret Milling Machine. (X) 600mm (Y) 220mm (Z) 310mm. Product Brochure
Product Brochure M576 HAFCO METALMASTER HM-51 Turret Milling Machine (X) 600mm (Y) 220mm (Z) 310mm Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-06-26 M576.pdf Left
More informationHolemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
More informationISO 9001.CE. MONASET Tool Grinder.
ISO 9001.CE MONASET Tool Grinder www.topwork.com.tw FEATURE CM-A & CM-2 sharpen and recondition complex tool shapes and parts. Turntable and guide bar allows workpieces grinding from different direction.
More informationUSER MANUAL & PARTS LIST MODEL 136A S/N:
NUMBERALL STAMP & TOOL CO., INC. USER MANUAL & PARTS LIST MODEL 136A S/N: P.O. BOX 187, 1 HIGH ST. SANGERVILLE, ME 04479 www.numberall.com office@numberall.com TEL: 207-876-3541 FAX: 207-876-3566 MODEL
More informationBack-Spotfacing. Flipcut For back-spotfacing and backor front-chamfering operations from one side, in one set-up. Back-Spotfacing. & Chamfering TOOLS
COGSDILL TOOL PRODUCTS, INC. Flipcut For back-spotfacing and backor front-chamfering operations from one side, in one set-up. Back-Spotfacing & Chamfering TOOLS Back-Spotfacing Available from stock for
More informationGeneral Safety and Maintenance Manual
General Safety and Maintenance Manual 4 H.P HORIZONTAL GRINDERS CAPACITY -6 Inch (150 mm) or 8 Inch (200 mm) Type 1 Wheels -Any Type 16, 17, 17R, 18 or 18R Cone Wheels w/ 5/8-11 Mounting 65H Series 4 H.P
More informationTube Facing Tool.
www.swagelok.com Tube Facing Tool This manual contains important information for the safe and effective operation of the Swagelok TF72 series tube facing tool. Users should read and understand its contents
More informationDozuki. Written By: Dozuki System. Guide to calibrating the Haas wireless intuitive probing system. How to Calibrate WIPS
Dozuki How to Calibrate WIPS Guide to calibrating the Haas wireless intuitive probing system. Written By: Dozuki System 2017 www.dozuki.com Page 1 of 22 INTRODUCTION Getting Started On initial setup or
More informationOPERATOR S MANUAL BENCH LATHE MODEL: BT1337G BOLTON TOOLS 1136 SAMUELSON ST. CITY OF INDUSTRY, CA 91748
OPERATOR S MANUAL BENCH LATHE MODEL: BT1337G BOLTON TOOLS 1136 SAMUELSON ST. CITY OF INDUSTRY, CA 91748 Many thanks for purchasing our BT1337G - Bench Lathe. Before operating, make sure you study the manual
More informationInventory (Figure 2)
MODEL T24631 8" SPIRAL CUTTERHEAD Installation INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction The Model T24631 spiral
More information