SCA.1, SCA. 2 INTERFACE CONNECTOR
|
|
|
- Jesse Johns
- 5 years ago
- Views:
Transcription
1 SCA.1, SCA. 2 INTERFACE CONNECTOR 240 SERIES (SCA) FEATURES Half pitch connector conformed to SCA system (80 pins). Add mating guide and ESD protection to do plug-in safety and reliability (They are newly added on SCA. 2CN). Hot-plugging. Ground contacts mate first before other contacts mate when engagement is done (conforms to SCA.2 specification). To prevent pin-bending, bellows contacts are used. Plug: 2 types are available. 1) The center of a SMT plug mates the center of a PCB. 2) 0.9 mm (0.035 in.) off-set from center SPECIFICATIONS MATERIALS Item Item Materials Operating temperature range 55 C to +105 C Insulator Polyester (UL94V-0) Current rating DC 1 A Conductor Copper alloy Voltage rating Contact resistance AC 240 V 40 mω max. (DC 6 V, 0.1 A) Plating Contact Terminal Gold plating Palladium plating Insulation resistance 1000 MΩ min. (DC 500 V) Dielectric withstand voltage) AC 750 V for 1 minute 1
2 240 Series (SCA.1) PLUG, SMT [0.9 mm (0.035 in.) OFFSET] PC BOARD MOUNTING PATTERN R 1.6 (0.062) (2.446) (2.283) 1.27 ±0.05 (0.050 ±0.001 ) (2.047) 1.0 (0.039) 4.0 (0.157) 0.9 (0.035) 7.0 (0.275) 10.0 (0.393) 12.0 (0.472) (0.500) R (0.025) 3.70 (0.145) 1.52 ±0.05 (0.059±0.001 ) 0.76 ±0.05 (0.029 ±0.001 ) ±0.1 (1.950±0.004 ) 1.27 ±0.05 (0.050±0.001 ) (0.975) 1.52 ±0.05 (0.059 ±0.001 ) ±0.05 (2.280±0.001 ) 3.50 ±0.1 (0.137±0.004 ) 1.52 ±0.1 ) (0.059± ±0.1 ) (0.145±0.004 Recommended PCB Thickness 1.0 ± 0.1 mm R PLUG, SMT (STRADDLE MOUNT) (2.446) (2.283) 1.27 ±0.05 (0.050 ±0.001 ) 0.9 (0.035) 7.0 (0.275) 1.0 (0.039) 4.0 (0.157) 10.0 (0.393) 12.0 (0.472) (0.500) FCN-248Q080-L/CS R 1.6 (0.062) (2.047) R (0.025) PC BOARD MOUNTING PATTERN 3.70 (0.145) 1.52 ±0.05 (0.059±0.001 ) 0.76 ±0.05 (0.029 ±0.001 ) (0.975) ±0.1 (1.950±0.004 ) 1.27 ±0.05 (0.050 ±0.001 ) 1.52 ±0.05 (0.059 ±0.001 ) R FCN-248Q080-L/BS ±0.05 (2.280±0.001 ) 3.50 ±0.1 (0.137±0.004 ) 1.52 ±0.1 (0.059±0.004 ) 3.70 ±0.1 (0.145±0.004 ) Recommended PCB Thickness 1.0 ± 0.1 mm 2
3 240 Series (SCA.1) SOCKET, VERTICAL MOUNT (2.446) (2.168) 7.10 (0.279) Housing Hold on bar 6.59 (0.255) 9.85 (0.387) 0.30 (0.011) 0.50 (0.019) 2.69 (0.105) 0.30 (0.011) 2.90 (0.114) (2.031) (0.075) (0.037) 2.20 ±0.1 (0.086 ±0.004 ) # (2.031) # ±0.1 (0.102 ±0.004 ) 2.60 ±0.1 (0.102 ±0.004 ) # ±0.1 (0.106 ±0.004 ) 0.80 ±0.1 (0.031 ±0.004 ) # ±0.1 (0.102 ±0.004 ) FCN-244B080-G/AS 3
4 240 Series (GBIC) PLUG, SMT (STRADDLE MOUNT), 20 PIN (1.078) (0.907) (0.778) (0.45) 1.27(0.05) 5.0 (0.197) 7.0 (0.276) FT #20 1 A 1.0(0.004) 1.0(0.004) 6.72(0.264) 3.55(0.149) 12.70(0.5) 0.50 (0.019) R 1.60(0.629) Retention leg A 1.27(0.05) 0.635(0.025) 1.27(0.05) 13.12(0.517) 9.25(0.364) R (0.025) 1.52(0.060) (1.033) (0.908) 1.52 (0.060) 0.05 S W TYP 0.81±0.03 (0.032±0.001) 0.05 S W 2 PLC 0.81±0.03 (0.032±0.001) 0.05 S W TYP 1.52(0.060) TYP 1.27(0.05) 1.37±0.05 (0.908±0.002) R 0.7 (0.028) 3.50(0.138) 0.28(0.011) 2.60±0.4(0.102±0.016) 0.81±0.03 (0.032±0.001) 0.05 S W TYP 1.31(0.052) TYP 2.33(0.092) 4.22(0.166) 19.87±0.2 (0.782±0.008) 2.53(0.099) 3.19(0.126) V Recommended PCB Thickness 1.0 ± 0.1 mm FCN-248Q020-L/ES 4
5 240 Series (SCA.2) PLUG, SMT [0.9 mm (0.035 in.) OFFSET] SCA (2.618) (2.446) (2.283) 1.27 ±0.05 (0.050 ±0.001 ) 0.9 (0.035) 7.0 (0.275) 1.0 (0.039) 4.0 (0.157) R 1.6 (0.062) (2.047) (2.278) (2.573) 10.0 (0.393) 12.0 (0.472) (0.500) R (0.025) 6.72 (0.264) 3.65 (0.139).93 (0.036) been 1.52 ±0.05 ( ±0.001 ) 1.52 ±0.05 ( ±0.001 ) 0.81 ±0.05 (0.031 ±0.001 ) 0.81 ±0.05 (0.031 ±0.001 ) ±0.1 (2.427 ±0.004 ) ±0.1 (1.950 ±0.004 ) 1.27 ±0.5 (0.050 ±0.001 ) R 1.37 ±0.5 (0.053 ±0.001 ) 3.50 ±0.1 ( ±0.004 ) 1.52 ±0.1 (0.059 ±0.004 ) 0.28 ±0.1 (0.011 ±0.004 ) 3.00 ±0.1 (0.118 ±0.004 ) P/N FCN-248Q080-L/DS has discontinued FCN-248Q080-L/DS ±0.1 (2.290 ±0.004 ) 4.22 ±0.05 (0.166 ±0.001 ) Recommended PCB Thickness 1.0 ± 0.1 mm 3.70 ±0.5 (0.145 ±0.001 ) PLUG, SMT (STRADDLE MOUNT) SCA (2.618) (2.446) (2.283) 1.27 ±0.05 (0.050 ±0.001 ) 0.9 (0.035) 7.0 (0.275) 1.0 (0.039) 4.0 (0.157) R 1.6 (0.062) (2.047) (2.278) (2.573) 10.0 (0.393) 12.0 (0.472) (0.500) R (0.025).95 (0.039) 6.72 (0.264) 3.65 (0.139) 1.52 ±0.05 ( ±0.001 ) 1.52 ±0.05 ( ±0.001 ) ±0.1 (2.427 ±0.004 ) ±0.1 (1.950 ±0.004 ) 0.81 ±0.05 (0.031 ±0.001 ) 0.81 ±0.05 (0.031 ±0.001 ) 1.27 ±0.5 (0.050 ±0.001 ) R 1.37 ±0.5 (0.053 ±0.001 ) 3.50 ±0.1 ( ±0.004 ) 1.52 ±0.1 (0.059 ±0.004 ) 0.28 ±0.1 (0.011 ±0.004 ) 3.00 ±0.1 (0.118 ±0.004 ) Recommended PCB Thickness 1.0 ± 0.1 mm FCN-248Q080-L/ES ±0.1 (2.290 ±0.004 ) 4.22 ±0.05 (0.166 ±0.001 ) 3.70 ±0.5 (0.145 ±0.001 ) 5
6 240 Series FC-AL PLUG, SMT (STRADDLE MOUNT) FIBER CHANNEL (1.618) (1.278) (1.176) (1.015) (0.95) #20 5.0±0.15 (1.197±0.006) 7.0 (0.276) #21 ESD contact 1.52±0.05 (0.60±0.002) 10.0 (0.394) 1.0 (0.039) 10.0 (0.394) 4.0 (0.157) 12.0 (0.472) 12.7 (0.5) 6.72 (0.264) R 1.6 (0.63) 1.27±0.3 (0.05±0.012) 24.13±04 (0.95±0.016) (1.047) (1.278) 39.96±04 (1.562±0.016) R 0.635(0.25).95 (0.039) 3.65 (0.139) 1.52±0.05 (0.60±0.002) 36.27±0.1 (1.428±0.004) 24.13±0.1 (0.95±0.004) 0.81±0.05 (0.032±0.002) 0.81±0.05 (0.032±0.002) 1.27±0.05 (0.05±0.002) 1.37±0.05 (0.054±0.002) R 0.7 (0.028) 3.50±0.1 (1.38±0.004) 0.28±0.1 (0.011±0.004) 1.52±0.1 (0.60±0.004) 2.60±0.05 (0.102±0.002) Recommended PCB Thickness 1.0 ± 0.1 mm FCN-248Q040-L/ES # ±0.05 (1.66±0.002) 3.70±0.05 (0.146±0.002) 6
7 248Q Series SCA.2 SINGLE SIDE SMT SCA (0.717) 54.2 (2.134) Insulator 7.0 (0.276) Pos/2 Pos 2.5 (0.098) 1 (0.040) 1.5 (0.060) 1 (0.040) (2.278) 66.5 (2.618) (2.176) (1.95) No (2.614) To initial point of contact X (0.025) 0.20 (0.008) 0.2 A (1.975) (2.314) 61.1 (2.406) 64.7 (2.547) Retention leg pitch X 5.0 (0.197) Pos/2+1 Retention Leg Signal contact ø ( ø ) (0.169) -A- To initial point of contact 1.85 ±0.25 (0.073 ±0.001 ) 8.8(0.346) 8.2(0.322) 8.8 (0.346) 13.8 (0.543) 2.1 (0.083) X-X(5/1) Sect. X-X 1.6 (0.063) 2.2(0.087) 2.96(0.117) 2.65 ±0.15 (0.104 ±0.006 ) 2.65 ±0.15 (0.104 ±0.006 ) 5.9 (0.232) 6.6 (0.256) 2.0 ±0.25 (0.079 ±0.001 ) To initial point of contact (4-ø0.047±0.002) Through hole 2.65±0.05 (0.104±0.002) 2.65±0.05 (0.104±0.002) (2-ø0.063±0.002) 4-ø1.2± ø1.6±0.05 No. 80 No B 64.7±0.05 (2.547±0.002) ±0.05 (2.314±0.0002) x 79= (0.025 x = 1.975) ( ) (0.025) No.41 No. 1 Recommended PC Board mounting dimensions Thickness 1.0 ±0.1 mm (0.040 ±0.004 ) 4.3 (0.169) 2.0±0.1 (0.079±0.004) 2.2±0.1 (0.0887±0.004) -B- 4.7±0.1 (0.185±0.004) FCN-248Q080-L/FS 7
8 240 Series FC-AL SOCKET, VERTICAL MOUNT FIBER CHANNEL 43.60±0.4 (0.716±0.016) A (0.630) (1.472) (1.354) A (1.090) (1.025) 24.13±0.3 (0.95±0.012) 1.27±0.2 (0.05±0.008) 5.30±0.15 (0.209±0.006) 7.10±0.3 (0.280±0.012) 1 20 FT (1.244) 15 B 3.50 (0.138) 6.50 (0.256) 2.20 (0.086) 1.45 (0.057) B 1.27±0.3 (0.05±0.008) 24.13±0.4 (0.95±0.016) 34.11±0.4 (1.343±0.016) 2.79±0.2 (0.109±0.008) 1.70 (0.067) 9.85±0.3 (0.388±0.012) 11.50±0.3 (0.453±0.012) 2.70±0.3 (0.106±0.012) ESD contact RECOMMENDED PWB THICKNES HICKNESS S PT : 0.8 mm PT : 1.6 mm PT : 2.0 mm PT : 2.4 mm PT : 3.2 mm PART NUMBER SIGNAL CONTACT POST LENGTH (A) ESD CONTACT POST LENGTH (B) F CN-244B040-L/CS 1.88 (0.074) 1.88 (0.074) F CN-244B040-L/BS 2.79 (0.110) 2.70 (0.106) F CN-244B040-L/DS 3.12 (0.123) 3.12 (0.123) F CN-244B040-L/ES 3.14 (0.124) 3.45 (0.136) F CN-244B040-L/FS 4.06 (0.160) 4.27 (0.168) PC BOARD MOUNTING PATTERN (0.075) (0.037) 2.20±0.1(0.086±0.004) 4.99 (0.196) 34.11(1.343) 9 #20 #2 2.60±0.1 (0.102±0.004) Ø 2.60±0.1 (Ø 0.102±0.004) #21 # ±0.1 (0.106±0.004) #39 Ø 0.80±0.8 (Ø 0.031±0.003) Ø 2.60±0.1 (Ø 0.102±0.004) 8
9 240 Series (SCA.2) SOCKET, VERTICAL MOUNT (2.71) (2.47) (2.35) (2.17) (2.039) (1.95) 5.30 (0.208) 7.10 (0.280) (2.44) 3.50 (.138) 6.50 (.256) 2.20 (.086) 1.45 (.057) 9.85 (.388) (.457) (1.95) (2.44) (A) (B) Electrostatic Discharge RECOMMENDED PWB THICKNES HICKNESS S PT : 0.8 mm PT : 1.6 mm PT : 2.0 mm PT : 2.4 mm PT : 3.2 mm PART NUMBER SIGNAL CONTACT POST LENGTH (A) ESD CONTACT POST LENGTH (B) F CN-244B080-L/CS 1.88 (0.074) 1.88 (0.074) F CN-244B080-L/BS 2.79 (0.110) 2.70 (0.106) F CN-244B080-L/DS 3.12 (0.123) 3.12 (0.123) F CN-244B080-L/ES 3.14 (0.124) 3.45 (0.136) F CN-244B080-L/FS 4.06 (0.160) 4.27 (0.168) PC BOARD MOUNTING PATTERN (0.075) (0.037) 2.20 ±0.1 (0.086 ±0.004 ) # (2.031) # ±0.1 (0.102 ±0.004 ) 2.60 ±0.1 (0.102 ±0.004 ) # ±0.1 (0.106 ±0.004 ) 0.80 ±0.1 (0.031 ±0.004 ) # ±0.1 (0.102 ±0.004 ) 9
10 240 Series (SCA.2) Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo , Japan Tel: (81-3) Fax: (81-3) Web: North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA U.S.A. Tel: (1-408) Fax: (1-408) Web: Europe Fujitsu Components Europe B.V. Diamantlaan WV Hoofddorp Netherlands Tel: (31-23) Fax: (31-23) Web: emea.fujitsu.com/components Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore Tel: (65) Fax: (65) Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America, Inc. or its affiliates do not warrant that the content of the datatasheet is error free. In a continuing effort to improve our products, Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets witout prior notice. Rev. November 2,
PC BOARD CONNECTORS 720M SERIES (CRIMP TYPE CONNECTORS)
PC BOARD CONNECTORS 720M SERIES (CRIMP TYPE CONNECTORS) FEATURES The 720 series connectors (crimp type connectors) are designed for a wide range of uses. 1-row and 2-row types are available to allow various
Memory card connectors
Memory card connectors (PCMCIA CONFORMABLE) surface mount 560H SERIES - LIGHTWEIGHT Features The connectors conform to the Japan Electronic Industry Development Association (JEIDA) and Personal Computer
PC BOARD MOUNTING CONNECTORS
PC BOARD MOUNTING CONNECTORS 720 SERIES (CRIMP TYPE CONNECTORS) FEATURES The 720 series connectors (crimp connector) are designed for a wide range of uses, and come in many shapes, two contact arrangements
COMPACT POWER TWIN RELAY. 1 POLE x 2 30A (Dual relay) (FOR AUTOMOTIVE APPLICATIONS)
COMPACT POWER TWIN RELAY POLE x 2 3A (Dual relay) (FOR AUTOMOTIVE APPLICATIONS) FBR2, 22 SERIES FEATURES DISCONTINUED (2) Two independent relays mounted in a single package Miniature size (4% of the volume
MAXIMUM LOAD CURRENT 1 A. 3 : 3 VDC (only AC type) 5 : 5 VDC 12 : 12 VDC 24 : 24 VDC A : AC type D : DC type
SOLID STATE RELAY MAXIMUM LOAD CURRENT 1 A FEATURES UL, CSA recognized Extremely small and light weight Size: 10.0 (W) 20.2 (L) 12.8 (H) mm Weight: approximately 5.5g High reliability, long life and maintenance
FBR211 SERIES 1 POLE MINIATURE RELAY. 1 to 2 A (FOR SIGNAL SWITCHING) 1 to 3 A (FOR AUTOMOTIVE SWITCHING) FEATURES (FOR SIGNAL APPLICATIONS)
MINIATURE RELAY POLE FBR2 SERIES to 2 A (FOR SIGNAL SWITCHING) to 3 A (FOR AUTOMOTIVE SWITCHING) FEATURES (FOR SIGNAL APPLICATIONS) 2 A maximum carrying current Capable of 2 A maximum continuous carrying
JY SERIES 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) POWER RELAY. RoHS compliant
POWER RELAY 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) JY SERIES RoHS compliant FEATURES UL, CSA, VDE recognized High sensitivity and low power consumption High isolation Wide operating range DIL pitch terminals
PRODUCT DATASHEET. is brought to you by. SOS electronic distribution of electronic components
PRODUCT DATASHEET is brought to you by SOS electronic distribution of electronic components Click to view availability, pricing and lifecycle information. Visit https://www.soselectronic.com/ Datasheet
VSB SERIES 1 POLE 16 A (HEAVY POWER CONTROL) POWER RELAY FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
POWER RELAY 1 POLE 16 A (HEAVY POWER CONTROL) VSB SERIES FEATURES All or nothing relay UL, CSA, VDE, SEV, FIMKO, SEMKO, IMQ, ÖVE, BSI recognized Working class: C Type of service: continuous duty Heavy
FBR46 SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment. High surge
To be Discontinued FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES RoHS compliant FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment.
POWER RELAY. FTR-K3-WG Series. 1 POLE - 25A - 1.5mm contact gap FTR-K1 SERIES FEATURES
FTR-K1 SERIES POWER RELAY 1 POLE - 25A - 1.5mm contact gap FTR-K3-WG Series FEATURES 1 pole, 25A 1 Form A Contact gap 1.5mm Surge strength (B/T open contacts) 2.5kV Compliance with European photovoltaic
POWER RELAY. FTR-K3-WS Series. 1 POLE - High Capacity 25A Type FTR-K1 SERIES FEATURES
POWER RELAY 1 POLE - High Capacity 25A Type FTR-K3-WS Series FEATURES 1 pole, 25A 1 form A contact Wide contact gap: 1.8mm Dielectric strength (B/T open contacts) 2.5kV Compliant with European photovoltaic
DISCONTINUED (1998) 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR244 SERIES MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY POLES to A (FOR SIGNAL SWITCHING) FBR44 SERIES FEATURES Gold-overlay bifurcated contact Contact material and shape especially suitable for signal switching; assures reliability at low level
PRODUCT DATASHEET. is brought to you by. SOS electronic distribution of electronic components
PRODUCT DATASHEET is brought to you by SOS electronic distribution of electronic components Click to view availability, pricing and lifecycle information. Visit https://www.soselectronic.com/ Datasheet
MINIATURE RELAY 1 POLE 1 to 2 A (FOR SIGNAL SWITCHING) FBR211 SERIES
MINIATURE RELAY POLE to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES 2 A maximum carrying current Capable of 2 A maximum continuous carrying current in the contact Superior reliability gold-overlay
FOR BOARD-TO-CABLE CONNECTION
FOR OR-TO-LE ONNETION 240 SERIES (GENERL-PURPOSE TYPE) FETURES 1.27 mm (0.050 in.) pitch contact arrangement in two rows enables high-density mounting. onnectors with to 96 contacts are available for various
Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. POWER RELAY 1 POLE 3,, 1 A FBR16 SERIES FEATURES Compact with high power (3
2 POLES 5 A LOW PROFILE TYPE
POWER RELAY POLES A LOW PROFILE TYPE FTR-F1 SERIES FEATURES Low profile power relay (height 1. mm) employing unique construction DPST/DPDT A, TV-3 rating available Higher isolation by employing reinforced
FTR-P1 SERIES 1 POLE 20 A QUIET POWER RELAY (FOR AUTOMOTIVE APPLICATIONS) FEATURES ORDERING INFORMATION
QUIET POWER RELAY POLE A (FOR AUTOMOTIVE APPLICATIONS) FTR-P SERIES FEATURES Original construction, where reduction of operational noise is considered when mounted on PCB, made it possible to design this
SY SERIES 1 POLE 1 A (FOR SIGNAL SWITCHING) MINIATURE RELAY SY SERIES. RoHS compliant
MINIATURE RELAY 1 POLE 1 A (FOR SIGNAL SWITCHING) SY SERIES RoHS compliant FEATURES Very small size and light weight UL, CSA recognized Conforms to FCC rules and regulations part 68 Dielectric strength
JY SERIES 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) POWER RELAY. Lead Free / RoHS compliant* FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) JY SERIES Lead Free / RoHS compliant* FEATURES UL, CSA, VDE recognized High sensitivity and low power consumption High isolation Wide operating range DIL
2 POLES 8 A LOW PROFILE TYPE
POWER RELAY 2 POLES 8 A LOW PROFILE TYPE FTR-F1 R SERIES RoHS compliant FEATURES DPST/DPDT 8A Low profile power relay (height 16. mm) employing unique construction Higher isolation by employing reinforced
NA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS Compliant FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS Compliant FEATURES Slim type relay for high density mounting Conforms to Bellcore specification and FCC Part 68 Dielectric strength 1,500 VAC
DISCONTINUED (2002) 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR12 SERIES MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR12 SERIES FEATURES Super miniature size: 0.2 inch 0.1 inch grid, 12 pin DIP Up to 50% less volume and board area than previous generation telecom
DISCONTINUED (2008) 4 Pole (2 FORM C+ 2 FORM A) Signal Relay for Central Switching/ Data Transmission FTR-B2 SERIES. RoHS compliant FEATURES
4 Pole ( FORM C+ FORM A) Signal Relay for Central Switching/ Data Transmission FTR-B SERIES RoHS compliant FEATURES DISCONTINUED (8) 4 POLE MINIATURE RELAY Mounting space of 17mm with 4 pole relay, suitable
FOR BOARD-TO-CABLE CONNECTION
OR OR-TO-L ONNTION 240R SRIS TURS 1.27 mm (0.0 in.) pitch contact arrangement enables high-density mounting. ellows ensure stable contact preventing pins from bending. The bellows also have excellent stability
VE 12 H M S E K HV VD (a) ( * ) (b) (c) (d) (e) (f) (g) (h) (i)
POWER RELAY 1 POLE 5 A (MEDIUM LOAD CONTROL) VE SERIES Lead Free FEATURES UL, CSA, VDE recognized 1 form A (SPST-NO) or 1 form C (SPDT) contact Low cost, miniature relay with big performance in small package
VF SERIES 1 POLE 20, 25, 30 A POWER RELAY (HEAVY POWER CONTROL) VF SERIES. RoHS compliant FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 20, 25, 30 A (HEAVY POWER CONTROL) VF SERIES RoHS compliant FEATURES UL, CSA, VDE recognized TV-15 rated 1 Form A (SPST-NO) contact Heavy duty 20 to 30 A small power relay High inrush
MINIATURE RELAY 2 POLES, 2A HIGH INSULATION/WIDE GAP FTR-C1 Series
MINIATURE RELAY 2 POLES, 2A HIGH INSULATION/WIDE GAP FTR-C1 Series RoHS compliant Features 2 Poles, 2 form C Contact gap: more than 0.6mm High surge voltage: 2,00V between open contacts,000v between coil
2 POLE 5A/TV-3 RATED COMPACT TYPE
POWER RELY POLE /TV-3 RTED COMPCT TYPE FTR-F Series RoHS compliant FETURES Small high density type relay mm save % compared to VB UL/CS/VDE/SEMKO/CQC approved Insulation distance: minimum mm between coil
JS SERIES 1 POLE 8 A (MEDIUM LOAD CONTROL) POWER RELAY. Lead Free FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 8 A (MEDIUM LOAD CONTROL) Lead Free FEATURES UL, CSA, VDE, SEV, SEMKO, FIMKO, ÖVE, BSI recognized UL class B (130 C) insulation 1 form A (SPST-NO) or 1 form C (SPDT) contact Low profile
TEL:-3349 FAX:-332 FBR2 SERIES ORDERING INFORMATION [Example] FBR2 S A D2 U P 2 ( CSA) (a) (b) (c) (d) (e) (f ) (g) (h) (a) Series N
![TEL:-3349 FAX:-332 FBR2 SERIES ORDERING INFORMATION [Example] FBR2 S A D2 U P 2 ( CSA) (a) (b) (c) (d) (e) (f ) (g) (h) (a) Series N](/thumbs/84/91187989.jpg "TEL:-3349 FAX:-332 FBR2 SERIES ORDERING INFORMATION [Example] FBR2 S A D2 U P 2 ( CSA) (a) (b) (c) (d) (e) (f ) (g) (h) (a) Series N")
TEL:-3349 FAX:-332E-MAIL: szss@3.com FUJITSU TAKAMISAWA COMPONENT CATALOG MINIATURE RELAY POLE to 2 A (FOR SIGNAL SWITCHING) to 3 A (FOR AUTOMOTIVE SWITCHING) FBR2 SERIES FEATURES (FOR SIGNAL APPLICATIONS)
(FOR AUTOMOTIVE APPLICATIONS)
COMPACT POWER RELAY POLE 2 A (FOR AUTOMOTIVE APPLICATIONS) FBR, 2 SERIES FEATURES Compact and lightweight structure (42% of the volume of the FBR relay) High current contact capacity (carrying current:
COMPACT POWER RELAY 1 POLE 25 A FOR AUTOMOTIVE APPLICATIONS
COMPACT POWER RELAY POLE 5 A FOR AUTOMOTIVE APPLICATIONS FTR-P3 Series FEATURES Compact for high density packaging. (65% volume of previous generation FBR 5/5 Series). High contact capacity with proven
2 POLES 5 A LOW PROFILE TYPE
POWER RELAY POLES A LOW PROFILE TYPE FTR-F1 SERIES RoHS compliant FEATURES Low profile power relay (height 16. mm) employing unique construction DPST/DPDT A, TV-3 rating available Higher isolation by employing
FRL-274 SERIES 1 POLE 12, 30, 40 A HIGH POWER RELAY (FOR AUTOMOTIVE APPLICATIONS) FEATURES ORDERING INFORMATION
HIGH POWER RELY POLE 2, 30, 40 (FOR UTOMOTIVE PPLICTIONS) FETURES High current switching and carry by using new conductive materials. Suitable for automotive applications such as BS, power assisted steering,etc.
VSB SERIES 1 POLE 16 A (HEAVY POWER CONTROL) POWER RELAY. RoHS compliant FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 16 A (HEAVY POWER CONTROL) RoHS compliant FEATURES All or nothing relay UL, CSA, VDE, SEV, FIMKO, SEMKO, IMQ, ÖVE, BSI recognized Working class: C Type of service: continuous duty Heavy
1 POLE 5,10, 16 A (TV-5 rated Cadmium free type) FTR-F2 / H2 / K2 Series
POWER RELAY POLE,, A (TV- rated Cadmium free type) FTR-F / H / K Series RoHS RoHS compliant compliant Features HIGH DENSITY MOUNTING mm height and 7mm mounting space HIGH ISOLATION Insulation Distance:
(FOR AUTOMOTIVE APPLICATIONS)
COMPACT POWER RELAY POLE 2 A (FOR AUTOMOTIVE APPLICATIONS) FBR, 2 SERIES FEATURES Compact and lightweight structure (42% of the volume of the FBR relay) High current contact capacity (carrying current:
1 POLE - 16A LOW PROFILE TYPE FTR-K1 Series
POWER RELAY FTR-K1 SERIES 1 POLE - 16A LOW PROFILE TYPE FTR-K1 Series RoHS compliant FEATURES Low profile (height: 15.7mm) HIGH ISOLATION5 Insulation Distance (between coil and contacts: 10mm min.) Dielectric
ultra MINIature 2-POLes 2a (LOW PrOFILe signal relay) Ftr-B3 series rohs compliant Features
ULTRA MINIATURE -POLES A (LOW PROFILE SIGNAL RELAY) FTR-B3 SERIES RoHS compliant Features DPDT C Ultra miniature low profile relay with high heat resistant material Height: 5.45mm, Weight:.85g, Mounting
RECTANGULAR CONNECTORS
RETANGULAR ONNETORS FN-360 SERIES FEATURES Many applications Various connectors are available for connection by means of soldering, wire wrapping, crimping, P board mounting, and insulation displacement
2 POLE 5A/TV-3 RATED COMPACT TYPE
POWER RELY POLE /TV-3 RTED COMPCT TYPE FTR-F Series RoHS compliant FETURES Small high density type relay mm save % compared to VB UL/CS TV-3 rating Insulation distance: minimum mm between coil and contacts
PARTNUMBER INFORMATION FTR-K1 C K 005 W - MA - RG [Example] (a) (b) (c) (d) (e) (f) (g)
![PARTNUMBER INFORMATION FTR-K1 C K 005 W - MA - RG [Example] (a) (b) (c) (d) (e) (f) (g)](/thumbs/83/88064178.jpg "PARTNUMBER INFORMATION FTR-K1 C K 005 W - MA - RG [Example] (a) (b) (c) (d) (e) (f) (g)")
POWER RELAY 1 POLE - 16A/12A/10A Transparent cover FTR-K1 Series FEATURES 16A, 12A, 10A versions Transparent cover Low profile (height: 15.7mm) High insulation Insulation distance (between coil and contacts):
FTR-B4 Series ULTRA MINIATURE RELAY SLIM SIGNAL RELAY. RoHS Compliant FEATURES ORDERING INFORMATION
ULTRA MINIATURE RELAY SLIM SIGNAL RELAY Series FEATURES Ultra miniature slim type relay for surface mounting Height: 9. mm maximum (THT) mm maximum (SMT) Weight: Approximately. g UL/CSA recognized Conforms
JS SERIES 1 POLE 8 A (MEDIUM LOAD CONTROL) POWER RELAY. Lead Free / RoHS compliant* FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 8 A (MEDIUM LOAD CONTROL) JS SERIES FEATURES Lead Free / RoHS compliant* UL, CSA, VDE, SEV, SEMKO, FIMKO, ÖVE, BSI recognized UL class B (10 C) insulation 1 form A (SPST-NO) or 1 form
1 POLE 5,10 A (CADMIUM FREE CONTACTS TYPE) FTR-F2 /H2 SERIES
POWER RELAY POLE, A (CADMIUM FREE CONTACTS TYPE) FTR-F /H SERIES RoHS compliant Features HIGH DENSITY MOUNTING Saves space by % compared to FTR-H type. HIGH ISOLATION Insulation Distance: Minimum mm between
RELAYS Solar Energy Systems
RELAYS Solar Energy Systems FUJITSU COMPONENTS CONTENTS Fujitsu relays for solar applications DC voltage versions - AC voltage versions - Latching versions RELAY PRODUCT LINE UP - SOLAR ENERGY SYSTEMS
1 POLE - 1 to 2A (For Signal Switching)
MINIATURE RELAY 1 POLE - 1 to A (For Signal Switching) SY Series FEATURES Very small size and light weight UL, CSA recognized Conforms to FCC rules and regulations part 68 Dielectric strength 00 VAC between
MINIATURE LOW NOISE RELAY
MINIATURE LOW NOISE RELAY POLE - 5A (For V car battery) FTR-P7 Series FTR-K SERIES FEATURES Miniature size, form C Low noise (average acoustic noise level: 5dB, distance 5cm) High contact capacity (5A,
COMPACT HIGH POWER RELAY
COMPACT HIGH POWER RELAY For automotive applications POLE - 6A (For 2V Car Battery) FBR59-HW Series FEATURES pole, 6A, form U High temperature grade (-4 C to 25 C) Comparable capability with Power Mini
POWER RELAY. FTR-H2 Series. 1 POLE - 10A Relay Type FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION FTR-H2 A K 012 T [Example] (a) (b) (c) (d) (e)
![POWER RELAY. FTR-H2 Series. 1 POLE - 10A Relay Type FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION FTR-H2 A K 012 T [Example] (a) (b) (c) (d) (e)](/thumbs/82/85798757.jpg "POWER RELAY. FTR-H2 Series. 1 POLE - 10A Relay Type FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION FTR-H2 A K 012 T [Example] (a) (b) (c) (d) (e)")
FTR-K SERIES POWER RELAY POLE - 0A Relay Type FTR-H Series FEATURES High density mounting Saves space by 6% compared to FTR-H type High insulation Insulation distance: minimum 6mm between coil and contact
COMPACT POWER RELAY. FBR51, 52 Series. 1 POLE - 25/30A (For automotive applications)
COMPACT POWER RELAY POLE - 2/3A (For automotive applications) FBR, 2 Series FEATURES Compact and light weight structure High current contact capacity (carrying current: 3 A/ minutes, 3 A/ hour) High resistance
ELCO Series 8005/8015 A KYOCERA GROUP COMPANY
Series 8005/8015 A KYOCERA GROUP COMPANY Series 8005 Position Miniature IDC Wire to Board Connector Series 8005 is a super compact pin Wire to Board connector designed for high density mounting. This is
Commercial Micro-D Subminiature I/O Products
Subminiature I/O Products requiring the density of a microminiature connector Designed In: Inches Packaging: Tube Mates With: 83421, 83422, 83424 PCB Thickness: 1.60mm (.062 ) Lead Free Process Capability:
COMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2
AUGUST 2016 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Gauges 5 APPENDICES NOTES: 1. Third angle projection
sealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical
FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is
.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
![.100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES](/thumbs/86/94150234.jpg ".100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES")
Introduction: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements. vailable in Single,
Interposer MATED HEIGHT
Product Specification: FEATURES High Performance PCBeam Connector Technology Product options at 1.27mm, 1.0mm, and 0.8mm pitch Maximized pin count per form factor 3 form factor sizes available Standard
PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS
BOARD/WIRE-TO-BOARD CONNECTORS PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS Minitek Headers for Pin-in-Paste Processes OVERVIEW Minitek is FCI s brand for board-to-board and wire/cableto-board connectors
FUJITSU, years of experience Relays
FUJITSU, years of experience Relays About Fujitsu Components Fujitsu, years of experience Over the years Fujitsu Components has made its name in the components and devices market with a complete product
Ordering Information. Ratchet Relay G4Q. Model Number Legend
Ratchet Relay CSM DS_E_3_2 Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation Each contact in the double-pole contact mechanism performs alternate make-brake operation at
Hyperboloid Contacts for High Performance Connectors
Hyperboloid Contacts for High Performance Connectors ICS SERIES Technology Company, Inc. integramate Hyperboloid Contacts QA Technology integramate Contacts are high quality, high reliability hyperboloid
PRODUCT SPECIFICATION
2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
Features 1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies DF65 Series 1. Enhanced contact reliability and lock structure The unique locking structure reinforces the engagement between
PRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
Amphenol AssembleTech. Contents. Mini Cool Edge IO (MCIO) Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection Guide Product Specifications........
CLICK HERE TO GO BACK TO PART NUMBER OVERVIEW. QFP/TQFP - 64 Pins (10x10) 0.5mm pitch. Detail C. Detail B
QFP/TQFP - 64 Pins (10x10) 0.5mm pitch Withstanding Voltage: 100V eff Solvent Durability: Freon Part Number (Details) IC149-064 - *69 - B5 B5 = Au over Ni Not available Detail C 10mm x 10mm N1 Detail B
PRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
Contents. Mini Cool Edge IO (MCIO) Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection Guide Product Specifications........
Eurostyle ESE PCB Terminal Blocks Pluggable and Fixed Mount
Eurostyle ESE PCB Terminal Blocks Pluggable and Fixed Mount FEATURES AND SPECIFICATIONS Fulfill your terminal block design requirements with a new and extensive range of ESE PCB terminal blocks from Molex.
SERIES SMB SUBMINIATURE CONNECTORS
SERIES SMB SUBMINIATURE CONNECTORS DESCRIPTION CONTENTS PAGE The HUBER+SUHNER subminiature connectors Series SMB, SMC, SMS have the same basic design. They only differ with regard to their coupling mechanism.
2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series Compact shape due to 2 x 2.2 grid layout of pins *Both are 7 contacts with 3A current rating 16 16 Existing products DF62 Fig.1 Features
SECTION 7 R114 / R115 / R116 / R117 / R112
SECTION 7 7 smb / SMB-LOCK / SMC R114 / R115 / R116 / R117 / R112 Contents SMB Introduction... 7-4 to 7-5 Interface... 7-6 Characteristics... 7-7 to 7-8 Plugs... 7-8 to 7-9 Jacks...7-9 to 7-10 Bulkhead
Mitis Antenna for LTE applications Part No. SRFL026 flexiiant Product Specification
Antenna for LTE applications flexiiant Product Specification 1. Features Antenna for 4G LTE applications including MIMO systems. LTE 700, GSM850, GSM900, DCS1800, PCS1900, WCDMA2100, LTE B7 (2500-2690
TY3085/6 SERIES. 3.00mm Pitch Wire To Wire Connector. Specification. Circuits. Kingmate
3.00mm Pitch Wire To Wire Connector Assembly Layout Right Angle Type DIP-Type Specification Circuits Pitch Current Rating Voltage Rating Contact Resistance Withstand Voltage Insulation Resistance Temperature
D1861A 10 Gbits/s 1310 nm DML Module
D1861A 10 Gbits/s 1310 nm DML Module Description The D1861A direct-modulated laser (DML) module is a cost-effective solution for 10 Gbits/s digital transmission up to 50 km using traditional intracity
1 POLE - 6A Slim Type (Medium Load Control)
POWER RELAY FTR-LY Series FTR-K SERIES POLE - 6A Slim Type (Medium Load Control) FEATURES Slim.0mm (h) x.0 mm (w) x 28.0mm (l) (straight type).0mm (h) x.0mm(w) x 28.0mm (l) (right angle type) form C and
HB01 Series Waterproof Cable-to-Cable Connector
v1.0 HB01 Series Waterproof Cable-to-Cable Connector Product Information Module Japan Aviation Electronics Industry, Ltd. Proprietary. Copyright 2016, Japan Aviation Electronics Industry, Ltd. JAE HB01
.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
![.100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES](/thumbs/90/102427427.jpg ".100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES")
dam Technologies, Inc. INTRODUCTION: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements.
SMB Connectors. RF Coax Connectors. Product Facts
SMB Connectors Product Facts SMB offers snap-fit coupling for quick connect/disconnect Choice of Commercial or High Rel Connectors 50 and 75 Ω MIL-Type connectors available Straight plugs and jacks are
kwiqmate Connectors Product Catalog Johnson
Product Catalog Johnson Emerson Connectivity Solutions, provider of kwiqmate branded Johnson product line of QMA connectors features a push-on style interface. Traditionally SMA plugs need to be configured
1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies
NEW 1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies DF65 Series (UL Pending) Lock structure and operation Socket Header Latch Latches are deflected slightly during mating. Features
SMB Connectors, 50 Ohm
SM Connectors, 50 Ohm Straight Plugs Max. 21.10 [.830] Max. Outer Other Metal s Dielectric Style 178, 178, 178, 196, 196 Gold Gold Nickel TEFLON MIL 413985-6 MIL 413985-1 Gold Gold Nickel TEFLON MIL 413985-3
QUADRAX /TWINAX CONNECTOR SERIES. MIL-DTL Style Connectors
QUADRAX /TWINAX CONNECTOR SERIES MIL-DTL-8999 Style Connectors QUADRAX AND TWINAX CONNECTORS MIL-DTL-8999 Twinax/Quadrax Plug 0.56 0. 0.85 0.05 Shell Size B Dia. +.008 -.0 K Max S Dia. Max Z Max 9 0.7
SB 50 Connectors - up to 120 amps
Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one
MCX. Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan
MCX Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan Tel : +886-2-2205-5791 E-mail : sales@aliner.com.tw Fax : +886-2-2203-8052 / 2205-5628 http://www.aliner.com.tw
Electrical dielectric withstanding voltage. sea level Vrms Vrms m Vrms Vrms
Applications Mechanical and electrical interface between on-board civil avionics equipments and racks Standards Arinc 600 Characteristics Mechanical material finish aluminum alodine 00 shells alloy to
Rated current. Dielectric withstanding voltage
mm Pitch Connectors HDR series Interface Connectors Outline HDR series connectors are very small surface mount (SMT) interface connectors with their contacts arranged at a pitch of mm, designed for the
Zhengi Antenna for Cellular applications Part No. SRFC015 flexiiant Product Specification
Antenna for Cellular applications flexiiant Product Specification 1. Features Antenna for 3G and 4G LTE applications including MIMO systems. GSM850, GSM900, DCS1800, PCS1900, WCDMA2100, LTE B7 (2500-2690
I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable
PRODUCT SPECIFICATION I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable P/N 20351-112R-37 P/N 20279-001E-01 RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw
By using this Adapter a connection between Socket and Emulator or programming device can be easily achieved.
Series Introduction QFP-Production Use Socket and Emulation-Adapter YAMAICHI's IC149-Series is available in many different formats, from 44 pins to 240 pins. It is designed to fit most of the common semiconductors
Qualification Test Report Mini-Universal MATE-N-LOK* Connector
Qualification Test Report Mini-Universal MATE-N-LOK* Connector 501-589 21 May 12 Rev B 1. INTRODUCTION 1.1. Purpose 1.2. Scope Testing was performed on the Tyco Electronics Mini-Universal MATE-N-LOK* Connectors
SBS Connectors - up to 110 amps
Connectors - up to 1 amps NEW 75G 75X Wire to Wire The patented connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits.
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
Amphenol AssembleTech. Contents. SlimSAS LP Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Technical Datasheet Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection
Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply DF63 Series (UL, C-UL, TÜV, Listed) Features 1. Rated for up to 15A DF63 has the capacity to handle a max of 15A when using 16 AWG wire.