Stock Guide TRADE AUTUMN & WINTER 2016/17
|
|
|
- Edgar Ellis
- 6 years ago
- Views:
Transcription
1 Stock Guide AUTUMN & WINTER 2016/17 Veneered Panels MDF Board Plywood Melamine Board Laminates Kitchen Worksurfaces Flame Retardant Panels Door Blanks TRADE
2 PRODUCT FINDER SECTION 1 Plywood Hardwood Plywood Page 2 Chinese Redwood Plywood Page 2 Marine Plywood BS1088 Page 2 Large Press 10 x 5 Chinese Hardwood Plywood Page 2 Birch Plywood Page 2-3 Finnish Birch BBX Skinply Page 2-3 Constructional Plywood Elliottis Pine Page 2-3 Sprucefloor Plywood Page 2-3 Antislip Plywood Page 3 SECTION 2 Oriented Strand Board OSB Oriented Strand Board (O.S.B) Page 3 SECTION 3 Medium Density Fibreboard MDF Medite Premier MDF Page 4 Medite V313 & Medite Exterior MDF Page 4-5 Medite LITE MDF Page 4-5 Finsa Fibracolour Black MDF Page 4-5 Standard MDF (Thicker & Thinner Sizes) Page 4-5 Finsa Extra Large MDF Page 4-5 V Grooved & Beaded V313 MDF Page 4-5 SECTION 4 Hardboard & White Painted MDF Standard Hardboard Page 5 Perforated Hardboard Page 6 Oil Tempered Hardboard Page 6 White & Magnolia Painted MDF/Hardboard Page 6 Swiftguard Protection Board Page 6 SECTION 5 Door Blanks Firecheck, Lightweight & Solid Chipboard Door Blanks Page 6 Flame Break FD30 Firecheck Door Blanks Page 6 SECTION 6 Pinboards & Insulation Boards Pinboard Page 7 Insulation Board Page 7 FREE DELIVERY * SECTION 8 Realwood Veneer, Reconstituted Veneer & Plain Melamine Edgings 22mm & 30mm Edgings Page 11 Veneered Door Blanks Page 11 SECTION 9 Flexible Products Flexible Plywood Page 12 Flexible MDF Page 12 Flexible Veneer Page 12 SECTION 10 Flame Retardant Panels Flame Retardant Plywood Page 13 Flame Retardant MDF Page 13 Gyproc Multiboard Page 13 SECTION 11 Melamine Faced Boards Matt White & Magnolia Faced Chipboard Page 13 Matt White & Magnolia Faced MDF Page 13 Textured White, Moisture Resistant Melamine Faced MDF Page 14 Textured Brown, Moisture Resistant Melamine Faced MDF Page 14 Grey Melamine MDF Page 14 Beech Melamine Superpan Page 14 Oak Melamine Superpan Page 14 Walnut Melamine Superpan Page 14 Woodgrain Effect Melamine Faced Superpan Superpan (MATT Finish) Page SECTION 12 Laminates & Worktops Plain White Laminated MDF Page 15 Solid Wood Worktops Page 15 Worktop Oil for Solid Wood Worktops Page 15 USEFUL INFORMATION Page 16 SECTION 8 Veneered Panels Veneered Plywood Page 7 Veneered MDF Page 8-10 *Orders over 50 excluding VAT 1 TEL sales@richardrussell.co.uk
3 SECTION 1 Plywood Hardwood Plywood BB/CC EXTERIOR WBP Hardwood BB/CC 4mm 2440 x 1220 PBRV04A mm 2440 x 1220 PBRV06A mm 2440 x 1220 PBRV09A mm 2440 x 1220 PBRV12A mm 2440 x 1220 PBRV15A mm 2440 x 1220 PBRV18A mm 2440 x 1220 PBRV22A mm 2440 x 1220 PBRV25A Marine Grade Far Eastern Plywood WBP - TO B.S 1088 Chinese Redwood 6mm 2440 x 1220 PFEM06A mm 2440 x 1220 PFEM09A mm 2440 x 1220 PFEM12A mm 2440 x 1220 PFEM18A mm 2440 x 1220 PFEM25A Chinese Redwood Plywood LARGE PRESS - EXTERIOR FACE / WBP POPLAR CORE 4mm 3050 x mm 3050 x mm 3050 x mm 3050 x mm 3050 x mm 3050 x Birch Plywood WBP S+/BB QUALITY LONG GRAIN Marine Grade Far Eastern LONG GRAIN 12mm 2440 x 1220, mm 2440 x 1220, Birch Plywood WBP - BB/CP QUALITY CROSS GRAIN 12mm 1525 x 3050 PLBE12B mm 1525 x 3050 PLBE18B mm 1525 x 3050 PLBE24B Birch Plywood WBP - BB/BB QUALITY - LONG GRAIN S+ Birch Plywood LONG GRAIN 4mm 2440 x 1220 PLBE04A mm 2440 x 1220 PLBE06A mm 2440 x 1220 PLBE09A mm 2440 x 1220 PLBE12A mm 2440 x 1220 PLBE15A mm 2440 x 1220 PLBE18A mm 2440 x 1220 PLBE21A mm 2440 x 1220 PLBE24A Matt White Melamine Faced Birch Plywood WBP Latvian Birch BB 18mm 2440 x TEL sales@richardrussell.co.uk 2
4 Plywood Continued Finnish Birch Throughout Plywood BBX GRADE - WBP EXTERIOR - "SKINPLY" 1.5mm 1525 x 1525 PBBX01Z Solid 1 Side Constructional Plywood WBP GLUED - "ELLIOTTIS PINE" - C+/C 9mm 2440 x 1220 PEPP09A mm 2440 x 1220 PEPP12A mm 2440 x 1220 PEPP18A Finnish Birch Throughout Spruce Plywood Type 111/111 CONFORMS TO BS 5268 PART 2 18mm 2440 x Sprucefloor Plywood T&G WBP CONFORMS TO BS 5268 PART 2 18mm 2440 x mm 2440 x Mesh / Film Faced Plywood WBP - BIRCH CORE - 240GRM MESH / 120GRM SMOOTH FILM REVERSE 12mm 2440 x mm 2440 x SECTION 2 Oriented Strand Board O.S.B EN TYPE 2 - STANDARD 8mm 2440 x mm 2440 x Spruce Plywood Sprucefloor Plywood T&G O.S.B EN TYPE 3 - BBA CERTIFIED - MOISTURE RESISTANT 18mm 2440 x O.S.B EN TONGUE & GROOVED FLOORING BOARD - TYPE 3 BBA CERTIFIED MOISTURE RESISTANT. 18mm 2400 x 600 T&G Mesh/Film Faced Plywood 3 TEL sales@richardrussell.co.uk O.S.B
5 SECTION 3 Medium Density Fibreboard Medite Premier MDF Board Medite Premier MDF Medite Premier MDF 10x5 Medite Premier MDF 10x4 6mm 2440 x mm 2440 x mm 2440 x mm 2440 x mm 2440 x mm 2440 x mm 2440 x mm 2440 x mm 2440 x mm 2440 x Medite Premier MDF Board, Large Press Sizes 12mm 3050 x mm 3050 x mm 3050 x Medite Premier MDF Board, Large Press Sizes 6mm 3050 x mm 3050 x mm 3050 x mm 3050 x mm 3050 x mm 3050 x mm 3050 x mm 3050 x Medite V313 Moisture Resistant CLASS A LOW FORMALDEHYDE 6mm 2440 x 1220 MMMR06A mm 2440 x 1220 MMMR09A mm 2440 x 1220 MMMR12A mm 2440 x 1220 MMMR15A mm 2440 x 1220 MMMR18A mm 2440 x 1220 MMMR22A mm 2440 x 1220 MMMR25A mm 2440 x 1220 MMMR30A Medite TRADE MDF CLASS A LOW FORMALDEHYDE Medite LITE 18mm 2440 x 1220 MLIT18A Finsa Fibracolour Black Throughout STANDARD GRADE MDF BOARD 19mm 2500 x Medite V313 Moisture Resistant CLASS A LOW FORMALDEHYDE Medite V313 Moisture Resistant 12mm 3050 x 1220 MMMR12E mm 3050 x 1220 MMMR18E mm 3050 x 1220 MMMR22E mm 3050 x 1220 MMMR25E TEL sales@richardrussell.co.uk 4
6 Medium Density Fibreboard Continued Medite Exterior (THIS PRODUCT IS ZERO FORMALDEHYDE) 12mm 2440 x 1220 MMEX12A mm 2440 x 1220 MMEX18A mm 2440 x 1220 MMEX25A Standard Grade MDF GENERAL PURPOSE, CLASS A LOW FORMALDEHYDE (UNBRANDED) 3mm 2440 x STD N/A 7.37 Standard Grade Thick MDF 45mm 2440 x mm 2440 x Finsa Extra Large Standard MDF Board 12mm 3660 x mm 3660 x V Grooved & Beaded Long Profile V Grooved & Beaded Cross Profile V313 V Grooved & Beaded LONG & CROSS PROFILE 9mm 2440 x mm 1220 x mm 2440 x mm 1220 x Standard Grade Hardboard 5 TEL sales@richardrussell.co.uk
7 SECTION 4 Hardboard & White Painted MDF Perforated Perforated 6.4mm 2440 x Oil Tempered 6.4mm 2440 x White Painted MDF 3.2mm 2440 x Side mm 2440 x Sides Magnolia Painted 1 SIDE Oil Tempered 3.2mm 2440 x Swiftguard Protection Board POLYPROPYLENE IMPACT & SPLASH RESISTANT 2mm 2440 x SECTION 5 Door Blanks Sentry Exterior Faced SOLID HARDWOOD CORE - FIRECHECK TO BS 476 PART 22: 1987 Flamebreak Firecheck Door All Boards have 3.6mm Plywood Faces 54mm 2440 x mm 2135 x Sentry Lightweight Exterior Faced FIRECHECK TO BS 476 PART 22: 1987 (Q-MARK) Swiftguard All Boards have 3.6mm Plywood Faces 44mm 2440 x mm 2135 x Flamebreak FD30 Firecheck Door Blank 45mm 2440 x mm 2135 x Sentry Exterior Door Blank TEL sales@richardrussell.co.uk 6
8 SECTION 6 Pinboards & Insulation Boards Karlit Pinboard Please enquire as to Face colours. From time to time Face colours vary 9mm 2440 x Light Ivory Faced Insulation Board 12mm 2440 x 1220 IVOR12A Karlit Pinboard SECTION 7 Veneered Panels DECORATIVE VENEERED PLYWOOD Crown Cut Oak 1 SIDE 4mm 2440 x 1220 R1CO04A mm 2440 x 1220 R1CO06A mm 2440 x 1220 R1CO09A mm 2440 x 1220 R1CO12A DECORATIVE VENEERED BIRCH PLYWOOD Crown Cut Oak A/B 2 SIDES 19mm 2500 x 1250 RCCO18Z Crown Cut Oak Veneered Ply Crown Cut Oak Veneered Birch 7 TEL sales@richardrussell.co.uk
9 Veneered Panels Continued DECORATIVE VENEERED MDF Stripey Sapele (Quarter Cut) 2 SIDES - A/B GRADE Sapele MDF 9mm 2440 x 1220 NSAP10A mm 2440 x 1220 NSAP13A mm 2440 x 1220 NSAP19A Quarter Cut Oak 2 SIDES - A/B GRADE 6mm 2440 x 1220 NQWO06A mm 2440 x 1220 NQWO10A mm 2440 x 1220 NQWO13A mm 2440 x 1220 NQWO16A mm 2440 x 1220 NQWO19A mm 3050 x 1220 NQWO19E mm 2440 x 1220 NQWO26A Quarter Cut Oak MDF Crown Cut Oak 2 SIDES - A/B GRADE 6mm 2440 x 1220 NCCO06A mm 2440 x 1220 NCCO10A mm 2440 x 1220 NCCO13A mm 2440 x 1220 NCCO16A mm 2440 x 1220 NCCO19A mm 3050 x 1220 NCCO19E mm 2440 x 1220 NCCO26A Crown Cut White Ash 2 SIDES - A/B GRADE Crown Cut Oak MDF 6mm 2440 x 1220 NCCA06A mm 2440 x 1220 NCCA10A mm 2440 x 1220 NCCA13A mm 2440 x 1220 NCCA16A mm 2440 x 1220 NCCA19A mm 2440 x 1220 NCCA26A Pine 2 SIDES - A/B GRADE Crown Cut White Ash MDF 6mm 2440 x 1220 NCAP06A mm 2440 x 1220 NCAP10A mm 2440 x 1220 NCAP13A mm 2440 x 1220 NCAP16A mm 2440 x 1220 NCAP19A mm 2440 x 1220 NCAP26A Pine MDF TEL sales@richardrussell.co.uk 8
10 Veneered Panels Continued DECORATIVE VENEERED MDF White Beech 2 SIDES - A/B GRADE 6mm 2440 x 1220 NWBE06A mm 2440 x 1220 NWBE10A mm 2440 x 1220 NWBE13A mm 2440 x 1220 NWBE16A mm 2440 x 1220 NWBE19A mm 3050 x 1220 NWBE19E White Beech MDF Steamed (Pink) Beech 2 SIDES - A/B GRADE 6mm 2440 x 1220 NPBE06A mm 2440 x 1220 NPBE10A mm 2440 x 1220 NPBE13A mm 2440 x 1220 NPBE19A Maple 2 SIDES - A/B GRADE 6mm 2440 x 1220 NMAP06A mm 2440 x 1220 NMAP10A mm 2440 x 1220 NMAP13A mm 2440 x 1220 NMAP16A mm 2440 x 1220 NMAP19A mm 3050 x 1220 NMAP19E mm 2440 x 1220 NMAP26A Steamed Beech MDF Cherry 2 SIDES - A/B GRADE 6mm 2440 x 1220 NCHE06A mm 2440 x 1220 NCHE10A mm 2440 x 1220 NCHE13A mm 2440 x 1220 NCHE16A mm 2440 x 1220 NCHE19A mm 3050 x 1220 NCHE19E mm 2440 x 1220 NCHE26A Maple MDF Quarter Cut Wenge A/B GRADE 6mm 2440 x 1220 NWEN06A mm 2440 x 1220 NWEN19A Cherry MDF 9 TEL sales@richardrussell.co.uk Qtr cut Wenge MDF
11 Veneered Panels Continued DECORATIVE VENEERED MDF Crown Cut Sapele 2 SIDES - A/B GRADE Walnut MDF 6mm 2440 x 1220 NCCS06A mm 2440 x 1220 NCCS10A mm 2440 x 1220 NCCS13A mm 2440 x 1220 NCCS16A mm 2440 x 1220 NCCS19A mm 2440 x 1220 NCCS26A American Black Walnut 2 SIDES - A/B GRADE Zebrano MDF Cedar MDF 6mm 2440 x 1220 NABW06A mm 2440 x 1220 NABW10A mm 2440 x 1220 NABW13A mm 2440 x 1220 NABW16A mm 2440 x 1220 NABW19A mm 3050 x 1220 NABW19E mm 2440 x 1220 NABW26A Zebrano 6mm 2440 x 1220 A/Balancer NZEB06A mm 2440 x 1220 A/B NZEB19A Cedar of Lebanon 6mm 2440 x 1220 A/Balancer NLEB06A TBA mm 2440 x 1220 A/B NLEB19A TBA Macassar RECONSTITUTED VENEERED MDF 6mm 2440 x 1220 A/Balancer NMAC06A TBA mm 2440 x 1220 A/B NMAC19A TBA Ebony RECONSTITUTED VENEERED MDF 6mm 2440 x 1220 A/Balancer NEBO06A TBA mm 2440 x 1220 A/B NEBO19A TBA Macassar MDF Ebony MDF TEL sales@richardrussell.co.uk 10
12 SECTION 8 Realwood Veneer, Reconstituted Veneer & Plain Melamine Edgings 22mm Thickness Wood Edgings ALL 50 METRE ROLLS - PRE GLUED, IRON ON FINISH & THICKNESS STOCK CODE White Ash - 22mm EASH20Z White Beech - 22mm EBEE20Z Pink Beech - 22mm EBEE20ZA Cherry - 22mm ECHE20Z Oak - 22mm EOAK20Z Pine - 22mm EPIN20Z Mahogany - 22mm EMAH20Z Maple - 22mm EMAP20Z American Walnut - 22mm EABW20Z Wenge - 22mm EWEN20Z Zebrano - 22mm EZEB20Z Cedar - 22mm ECED20Z Ebony (Reconstituted) EEBO20Z Macassar (Reconstituted) EMAC20Z 22mm Thickness Melamine Edgings ALL 50 METRE ROLLS - PRE GLUED, IRON ON FINISH & THICKNESS STOCK CODE White Melamine - 22mm EWME20Z Black Melamine - 22mm EBLM20Z Magnolia Melamine - 22mm EMME20Z Grey Melamine - 22mm EGRM20Z Natural Oak Melamine - 22mm ENOK20Z Beech Melamine - 22mm ESPB20Z Walnut Melamine - 22mm ESPW20Z Dark Walnut Melamine - 22mm ESDW20Z Maple Melamine - 22mm ESPM20Z 30mm Thickness Edgings ALL 50 METRE ROLLS - PRE GLUED, IRON ON FINISH & THICKNESS STOCK CODE White Ash - 30mm EASH26Z White Beech - 30mm EBEE26Z Pink Beech - 30mm EBEE26ZA Cherry - 30mm ECHE26Z Oak - 30mm EOAK26Z Pine - 30mm EPIN26Z Mahogany - 30mm EMAH26Z Maple - 30mm EMAP26Z American Walnut - 30mm EABW26Z 50mm Thickness Edgings ALL 50 METRE ROLLS - PRE GLUED, IRON ON FINISH & THICKNESS STOCK CODE Walnut - 50mm EABW50Z Oak - 50mm EOAK50Z White - 50mm EWME50Z 22mm White Ash 22mm Mahogany 22mm Ebony 30mm Cherry 11 TEL sales@richardrussell.co.uk 50mm Walnut
13 Edgings Continued Natural Oak ABS Edging Flexible Plywood Flexible MDF 23mm Thick ABS Plastic Edging, Unglued THICKNESS & DIMENSIONS White, 23mm x 75 Metre Grey, 23mm x 75 Metre Natural Oak, 23mm x 75 Metre Wenge, 23mm x 75 Metre SECTION 9 Flexible Products Flexible Plywood STOCK CODE ESWI20Z ESGR20Z ESNO20Z ESWE20Z 5mm 2440 x 1220 PFLE05A mm 1220 x 2440 PFLE05C mm 2440 x 1220 PFLE08A mm 1220 x 2440 PFLE08C Flexible MDF 6mm 2440 x mm 1220 x Flexible Veneer All 1mm 2440 x 1220 Paper Backed Realwood Veneers A 10 Packaging & Handling Charge applies on Small Quantities (not Oak & Walnut) THICKNESS & DIMENSIONS STOCK CODE PER PACK C/C White Maple VCWM01A 10 C/C White Ash VCWA01A 10 C/C White Oak VCWO01A 10 C/C Cherry VCCH01A 10 Q/C Sapele VQSA01A 10 Rotary Pine VROP01A 10 Steamed Beech VSTB01A 10 White Beech VWHB01A 10 Black Walnut VABW01A 10 Flexible Veneer - Ash TEL sales@richardrussell.co.uk 12
14 SECTION 10 Flame Retardant Panels F.R Plywood Euro Class C (USED TO BE CLASS 1) - COMPLIES TO BS 476 PART 7 4mm 2440 x 1220 PFRT04A mm 2440 x 1220 PFRT06A mm 2440 x 1220 PFRT09A mm 2440 x 1220 PFRT12A mm 2440 x 1220 PFRT18A Flame Retardant Plywood Euro Class C MDF - Medite Euro Class C (PREVIOUSLY CLASS 1) COMPLIES TO BS 476 PART 7 6mm 2440 x 1220 MFRT06A mm 2440 x 1220 MFRT09A mm 2440 x 1220 MFRT12A mm 2440 x 1220 MFRT15A mm 2440 x 1220 MFRT18A mm 2440 x 1220 MFRT25A MDF - Medite Euro Class B (PREVIOUSLY CLASS 0) COMPLIES TO BS 476 PART 6 12mm 2440 x mm 3050 x mm 2440 x mm 3050 x mm 2440 x Flame Retardant MDF Euro Class C "Gyproc - Multiboard" Euro Class B (USED TO BE CLASS 0) FLAME RETARDENT 6mm 2400 x 1200 GFRT06Z mm 2400 x 1200 GFRT10Z mm 2400 x 1200 GFRT12Z FR Euro Class B (USED TO BE CLASS 'O') HARDWOOD PLYWOOD 18mm 2440 x Flame Retardant MDF Euro Class B SECTION 11 Melamine Faced Boards White Chipboard (MATT Finish) 15mm 2440 x 1220 CWHM15A mm 2440 x 1220 CWHM18A Gyproc - Multiboard 13 TEL sales@richardrussell.co.uk FR Euro Class B
15 Melamine Faced Boards Continued White MDF (MATT Finish) White MDF (MATT Finish) 12mm 2440 x 1220 MWHM12A mm 2440 x 1220 MWHM15A mm 2440 x 1220 MWHM18A mm 3050 x 1220 MWHM18E mm 2440 x 1220 MWHM25A Magnolia MDF (MATT Finish) 18mm 2440 x 1220 MMAM18A White MDF (TEXTURED Finish) MOISTURE RESISTANT 18mm 2440 x 1220 MWTX18A Brown MDF (TEXTURED Finish) Grey MDF (TEXTURED Finish) Walnut Superpan Brown MDF (TEXTURED Finish) MOISTURE RESISTANT 18mm 2440 x 1220 MBTX18A Grey MDF (TEXTURED Finish) 6mm 2440 x 1220 MGRM06A mm 2440 x 1220 MGRM18A Black MDF (TEXTURED Finish) 18mm 2440 x 1220 MBLT18A Woodgrain Effect Melamine Faced Boards Beech Superpan (MATT Finish) 10mm 2440 x 1220 MSPB10A mm 2440 x 1220 MSPO18A Supreme Walnut Superpan 18mm 2440 x 1220 MSPW18A Dark Cambridge Walnut MDF (MATT Finish) 10mm 2440 x 1220 MSDW10A mm 2440 x 1220 MSDW18A Wenge Melamine MDF 10mm 2440 x 1220 MSWE10A mm 2440 x 1220 MSWE18A Wenge MDF TEL sales@richardrussell.co.uk 14
16 Woodgrain Effect Melamine Faced Boards Continued Maple Superpan (MATT Finish) 10mm 2440 x 1220 MSPM10A mm 2440 x 1220 MSPM18A Natural Oak Melamine MDF 10mm 2440 x 1220 MSNO10A mm 2440 x 1220 MSNO18A Premium Beech SECTION 12 Laminates & Worktops SOLID WOOD WORKTOPS "SELECT" RANGE - 40MM WIDE STAVES European Oak THICKNESS & DIMENSIONS STOCK CODE WEIGHT(KG) 40mm 4200 x 650 OAK European Oak Worktop Oil & Accessories PRODUCT STOCK CODE Osmo Clear Satin Wax Oil Natural Oak MDF 15 TEL sales@richardrussell.co.uk
17 USEFUL INFORMATION Technical Information Class C (formerly Class 1) = A Fire Rating relating to our Stocked Flame Retardant MDF, Plywood & Hardboard. Essentially it means the Product complies to a Half Hour Firecheck (to B.S 476 Part 7) Class B (formerly Class 0) = A fire rating the same as the above but with a One hour firecheck (to B.S 476 Part 6) M.R or V313 = A Moisture Resistant term. Generally relates to MDF products. We also sell Exterior Grade Products so do be careful not to get the two mixed up! P4 = A Standard Grade Chipboard. P5 = A Moisture Resistant Grade Chipboard. P6 = A Flooring (Industrial) Grade for Mezzanine Flooring Chipboard. P7 = A Moisture Resistant Flooring (Industrial) Grade of Mezzanine Flooring Chipboard. T & G = Tongued & Grooved (T & G 4 = all 4 edges and T & G 2 = only 2 long edges) W.B.P = A Term used mainly for plywood s that are of Exterior Grading. Class A = A special low Formaldehyde emission board. Many of our stocked Standard Grade MDF is Class A. If you are unsure or require further information, please ask a member of the Sales Team. A/A = A Premium Veneered Board that has been veneered with a top quality A grade veneer on both sides. A/B = A Premium Veneered Board that has been veneered with a top quality A grade veneer on one side and a lesser quality veneer on the reverse. This is the standard classification for 2 sided veneered boards. A/-B = A standard to lower quality Veneered Board we do not stock this variety so please beware of any others that may disguise the true industry classification. BB = A Grading for a good quality plywood face i.e on a Birch Decorative Plywood. This would mean it was this quality on both sides having minimal wood defects and blemishes. BB/WG = Same as above but the WG refers to a lesser quality reverse with more defects, blemishes and filler. Size Conversions Metric (mm) Feet Inches 915 X X 2 36 X X X 3 36 X X X 2 48 X X X 3 48 X X X 4 48 X X X 3 60 X X X 4 60 X X X 5 60 X X X 2 72 X X X 3 72 X X X 4 72 X X X X X X X X X X X X X X X 3 84 X X X 4 96 X X X 6 96 X X X X X X X X X X X X X X X X X X X X X X X X 2 96 X 24 Service Area We can offer delivery within our Service Area as per the attached Postcode Map of London and Greater London. Outside these areas we can consider any delivery, however this may be subject to Separate Delivery Charge being levied based upon the nature of the Goods on Order. TEL sales@richardrussell.co.uk 166
18 OPENING HOURS WAREHOUSE Monday to Friday 8am to 4.30pm Saturday 8am to 12 noon Sunday CLOSED OFFICES Monday to Friday 7am to 5pm Saturday 8am to 12 noon Sunday CLOSED We are closed on Public Holidays throughout the year and Christmas Opening times are Published in advance in October. Richard Russell (Panels) Limited Units1-3 Beddington Trading Park Croydon, Surrey, CRO 4TT TEL FAX richardrussell.co.uk
Veneered Panels MDF Board Plywood Melamine Board Laminates Kitchen Worksurfaces Flame Retardant Panels Door Blanks SPRING/SUMMER 2015
SPRING/SUMMER 2015 Veneered Panels MDF Board Plywood Melamine Board Laminates Kitchen Worksurfaces Flame Retardant Panels Door Blanks PRODUCT FINDER SECTION 1 Plywood Hardwood Plywood Page 2 Chinese Redwood
FREE PRODUCT FINDER DELIVERY * SECTION 10. SECTION 8 Veneered Panels Veneered Plywood Page 7 Veneered MDF Page 8-10
PRODUCT FINDER SECTION 1 Plywood Hardwood Plywood Page 2 Chinese Redwood Plywood Page 2 Marine Plywood BS1088 Page 2 Large Press 10 x 5 Chinese Hardwood Plywood Page 2 Birch Plywood Page 2-3 Finnish Birch
Product & Information Guide
Product & Information Guide Importers and distributors of wood based panel products T 01708 864245 F 01708 864626 E sales@dhhtimber.co.uk W dhhtimber.co.uk KEEP UP TO DATE WITH US ON SOCIAL MEDIA birch
TOPEKA Conversion Factors Lineal Feet to Board Feet Size Factor Size Factor NW Hwy 24, Silver Lake, KS 66539
INVENTORY ITEMS WESTERN RED CEDAR SIDING CLEAR VERTICAL GRAIN, KILN DRIED 3 THRU 20. 1/2 X 4 SMOOTH CEDAR LAP 1/2 X 6 SMOOTH CEDAR LAP 1/2 X 8 SMOOTH CEDAR LAP. 3/4 X 10 SMOOTH CEDAR LAP HAIDA BRAND WESTERN
PINE WOODS OAK METALS POLYMERS ASH SOFTWOODS CHIPBOARD MAHOGANY MAN MADE HARDWOOD WOODS MDF PLYWOOD BEECH HARDBOARD THERMOSET FERROUS METALS CARBON
ASH PINE MAHOGANY SOFTWOODS CHIPBOARD HARDWOOD MAN MADE WOODS OAK WOODS MDF PLYWOOD BEECH HARDBOARD RESISTANT METALS MATERIALS ALUMINIUM POLYMERS NON-FERROUS METALS UREA FORMALDEHYDE COPPER ZINC THERMOSET
sheet materials decorative veneered boards specialist boards added value services
sheet materials decorative veneered boards specialist boards added value services 2 sheet materials introduction As part of the Brook Bros complete timber products portfolio and its one-stop-shop policy,
PRODUCT CATALOGUE WOOD PRODUCTS:
2009 200 PRODUCT CATALOGUE WOOD PRODUCTS: VitalWOOD VitalWOOD MDF MDF Melamine Boards VitalFLOOR HDF Laminated Flooring VitalPLY Plywood VitalPLY WBP Marine Plywood VitalBOARD Hard Board BMD sales@vital.com.sg
Issue 1. Wrapped range of interior MDF mouldings
Issue 1 Wrapped range of interior MDF mouldings A range of high quality, stable and robust interior MDF mouldings wrapped in your choice of real wood veneer, paper or. Technical information FSC certified
Product Catalogue. World-wide Traders in Plywood and Wood Based Panel Products. Plywood. Flexi Products MDF. Door Blanks OSB. Blockboard.
World-wide Traders in and Wood Based Panel Products MDF OSB Decoratives Panel Processing Flexi Products Door Blanks Blockboard Hardboard Chipboard Product Catalogue Contents page 2 page 3 page 4 page 5
MOULDING & MILLWORK FALL 2017
MOULDING & MILLWORK FALL 2017 Our specially trained millwork team can help you find your perfect style. Visit our showroom to get started. TABLE OF CONTENTS Casings...2 Base... 3 Crown... 4 Miscellaneous...5-6
Routing Tools. Profile Tooling. Single Edge Solid Carbide V Bottom. Double Edge Solid Carbide Upcut Spiral Ball Nose. Phone:
Single Solid Carbide V Bottom Softwood: Cedar, Cottonwood, Pine and Redwood Hardwood: Ash, Beech, Birch, Cherry, Mahogany, Maple, Oak, Poplar, Teak and Walnut Composite Wood: MDF, Particle Board and Plywood
Public Trade Centre Stock List
Public Trade Centre Stock List Milton Sawmills, Auchincarroch Road, Jamestown, Alexandria, Dunbartonshire G83 9EY Tel: 01389 751 821 Fax: 01389 755 659 tradecentre@gilmouraitken.com www.gilmouraitken.com
Panel Products Guide. Veneered MDF. Hardwood Plywood. Softwood Plywood. Pinboards. Door Blanks CDF. Particle Board. Flexible Products MDF
Panel s Guide Hardwood Plywood Softwood Plywood Door Blanks Particle Board MDF CDF Veneered MDF Flexible s Pinboards Flame Retardant s 05 13 16 17 19 22 23 24 26 27 PANEL PRODUCTS GUIDE International Decorative
Veneered & Edgebanded
abinet Doors & Drawer Fronts Veneered & Edgebanded Style 60 - Veneered ¾" MDF ore Doors & Drawer Fronts Walzraft has created the Style 60 Veneered Door and Drawer Front with a wide range of design flexibility.
Unit 2 Engineered Panels
Unit 2 Engineered Panels MULTICHOICE 1. What is another name for large, reconstituted wood sheets or panels? (A) formed panels (B) engineered panels (C) architectural panels (D) construction panels 2.
Paperbacked Veneer: 2' x 8'
Paperbacked Veneer: 2' x 8' 10 mil Lead Time 10 mil Lead Time Alder, Red, Clear $ 49.90 1 Day Sycamore, English, Figured $ 158.20 8 Days Alder, Red, Knotty $ 46.90 1 Day Teak, Flat Cut $ 75.60 5 Days Anigre,
Timber and timber products
Timber and timber products Introduction Timber material properties and characteristics Table: Common softwoods and hardwoods used in Australia Softwoods Oregon Radiata pine Canada pine Redwood Western
MDF & EDGE BANDING. The quality you expect. The options you need. MELAMINE FACED MDF PAPER OVERLAID MDF POLYESTER FACED MDF COMMERCIAL MDF
MDF & EDGE BANDING MELAMINE FACED MDF PAPER OVERLAID MDF POLYESTER FACED MDF COMMERCIAL MDF VENEER FACED MDF EDGE BANDING MDF WAVE BOARD MDF SLAT BOARD The quality you expect. The options you need. www.alrahmani.com
Stocking List. Hardwood Lumber page 2. Hardwood Plywood page 3. Melamine page 4. Particle Board page 4. MDF page 4. Veneers page 5.
"Creating Opportunities to Build Trust Through Service" Stocking List Hardwood Lumber page 2 Hardwood Plywood page 3 Melamine page 4 Particle Board page 4 MDF page 4 Veneers page 5 Hardboard page 5 Finished
Products that deliver. the difference CALIFORNIA DIVISION
Products that deliver the difference CALIFORNIA DIVISION Decorative Surfaces TFL Egger Discover the huge variety of combinations in the new EGGER Decorative Collection valuable inspiration, smart solutions
LIFE IS NOT A STRAIGHT LINE
LIFE IS NOT A STRAIGHT LINE It wasn t nature that created straight lines: it was the limitations of technology. Bolefloor allows a return to a natural state: organic lines as nature intended. Boleform
product guide 2014 a complete range of panel products > plywood > OSB > MDF > chipboard > decorative veneered panels
> plywood > OSB > MDF > chipboard > decorative veneered panels > door blanks > resistant building boards > panel processing product guide 2014 a complete range of panel products www.hanson-plywood.co.uk
PANEL PRODUCTS. p.74 p.75
PANEL PRODUCTS Look for the FSC certified products FOR ACCOUNTS APPLICATION FORM, SEE PAGE 169 Pictured: HI-MACS Natural Acrylic Stone Introduction Environmental Plywoods: Coniferous/Structural Plywood
Timbmet An Introduction
Timbmet An Introduction 2 About Timbmet Our Products 3 About Timbmet Founded in 1942, Timbmet is a major UK importer, distributor and supplier of Timber and Panel products. We are an environmentally conscientious
FLEXIBLE PANELS PRODUCT GUIDE
FLEXIBLE PANELS PRODUCT GUIDE www.lathamtimber.co.uk FLEXIBLE MDF James Latham stock a range of Flexible MDF to compliment Flexible plywood. Flexible MDF has precision machined slots across the length
Carpentry Canadian 3rd Edition Vogt TEST BANK Full download at:
UNIT 5 Carpentry Canadian 3rd Edition Vogt SOLUTIONS MANUAL Full download at: https://testbankreal.com/download/carpentry-canadian-3rd-editionvogt-solutions-manual/ Carpentry Canadian 3rd Edition Vogt
Finished Products Guide
Finished Products Guide Hardwood Flooring Tongue & Groove Paneling Custom Moldings Shawano Location W7447 Anderson Ave. Shawano, WI 54166 Toll-free: 800-462-7440 Local: 715-524-4314 Fax: 715-526-4997 Store
Plywood. structural, building & decorative. Performance with quality. veneers P laminates P plywood P flooring P timber P trade
Plywood structural, building & decorative Performance with quality veneers P laminates P plywood P flooring P timber P trade Performance with quality Amerind is a leading Australian distributor of premium
Product Guide Specification For Nonrated & 20-Minute Rated Doors
Woodtech Trading Company 455 Fourth Avenue E.N. P.O. Box 2609 Columbia Falls, MT 59912 800-775-1352 (phone) 800-775-1353 (fax) www.woodtechdoor.com Product Guide Specification For Nonrated & 20-Minute
CD Structural Plywood (F8) Density Approximately 550 kg/m 3 in Radiata pine Approximately 580 kg/m 3 in Taeda and Slash pine
Plywood This versatile range of plywood is ideal for a host of applications from cabinetry, furniture, and walls to ceilings, joinery, and eaves lining. You ll also find products that are suitable for
LEADING STOCKIST & SUPPLIER OF LUMB ER AND WOOD PRODUCTS
LEADING STOCKIST & SUPPLIER OF LUMB ER AND WOOD PRODUCTS About the Company Atlas Commercial Co ( Kwt) W.L.L is one of the oldest companies in Kuwait (Est. 1962) dealing in Lumber, Wood Products, Galvanized
Guide to Panels, Doors & Worktops
Guide to Panels, Doors & Worktops With extensive distribution and regional Depots, Timbmet provide an exceptional customer delivery and collection service and office or field support. Timbmet Sales 1 Oxford
W.Howard Catalogue. Issue No.5
W.Howard Catalogue Issue No.5 W. Howard Limited The Leing Edge in MDF Moulding With over 50 years experience in the timber industry, we pride ourselves in being a progressive and innovative company. Originally
AQA GCSE Design and Technology 8552
AQA GCSE Design and Technology 8552 Natural and manufactured timbers Unit 3 Materials and their working properties 2 Objectives Know the primary sources of materials for producing natural and manufactured
Table of Contents. The Paxton Advantage. Decorative Surfaces Are Used Everywhere!
www.paxtonwood.com The Paxton Advantage Decorative Surfaces Are Used Everywhere! Today, residential and commercial interior designers have available to them a broader range than ever before of decorative
J. Gibson McIlvain Company Exotic Lumber, Domestic Hardwoods & Custom Mouldings Since 1798
MOULDING CATALOG J. Gibson McIlvain Company Exotic Lumber, Domestic Hardwoods & Custom Mouldings Since 1798 J. Gibson McIlvain Company The Finest Woods From Around the World Since 1798 North America Alder
Products that deliver. the difference ONTARIO DIVISION
Products that deliver the difference ONTARIO DIVISION Decorative Surfaces TFL Prism Arauco s largest TFL collection ever offers nearly 100 of the most contemporary solid colours, prints and woodgrains.
DIEBOARDS & PLYWOOD. Flat Dieboards. Rotary Dieboards. Plywood. Other Sheet Materials
DIEBOARDS & PLYWOOD In addition to supplying the highest quality pattern grade lumbers for over 100 years, Freeman offers flat and rotary dieboards, a variety of high-grade, economical plywoods, and specialty
Chamberlain. elmwood fine custom cabinetry. scroll for more information. Prime Center Panel. Raised Center Panel Options. General Specifications
2.2 4.7 General Specifications Door Construction: 5 Piece Wood Mortise & Tenon door. Center Panel Construction: 1/ Veneer Center Panel. See drawings for other available options. Rail/Stile Size Options:
Imola 44. elmwood fine custom cabinetry. scroll for more information. General Specifications. Prime Center Panel. Additional Panel Options
General Specifications Prime Center Panel 4.7 5. 5.7 Door Construction: 5 Piece MDF with 44 applied moulding around the outside of the rails. Center Panel Construction: 3/8 recessed panel. See drawings
SECTION FINISH CARPENTRY PART 1 GENERAL. 1.1 SECTION INCLUDES A. Interior Finish Carpentry Work: 1. Refer to schedule at end of Section.
SECTION 06200 - FINISH CARPENTRY PART 1 GENERAL 1.1 SECTION INCLUDES A. Interior Finish Carpentry Work: 1. Refer to schedule at end of Section. 1.2 RELATED SECTIONS A. Section 06100 - Rough Carpentry:
Sustainable creativity!
Sustainable creativity! ENG 2 LL54 Dark Lime Looks & Likes As a designer you love to work with attractive materials but your focus is also on economic and ecological solutions. Look likes have it all:
TH 3TREET s 0RINCETON -. s &! w ww. dis tinctive do o r de si g ns.co m
TH 3TREET s 0RINCETON -. s &! 8 800.36 6.1 6 3 1 w ww. dis tinctive do o r de si g ns.co m PROD C C OG WE DELIVER QUALITY PRODUCTS In 1987 Distinctive Door Designs, Inc. began manufacturing cabinet doors
JUNE 2005 WHOLESALE PRICE LIST CATALOG #105
JUNE 2005 WHOLESALE PRICE LIST CATALOG #105 14002 CANYON ROAD E. PUYALLUP, WASHINGTON 98373 (253) 531-9132 FAX (253) 531-8271 1-888-531-9132 email: sales@ruckmanscabdoor.com DOOR ORDER FORM CUSTOMER JOB
Groove. Timber Acoustic Panels
Groove Timber Acoustic Panels 2 Groove - timber acoustic panels Combining carpentry expertise with acoustic knowledge to give maximum control over sound and aesthetics Groove panels The ultimate renewable
MDF 1-Piece / 3D Laminate (RTF)
MDF 1-Piece / 3D Laminate (RTF) Raw MDF Door & Drawer Front Construction and Ordering MDF doors and drawer fronts are constructed of premium, ¾" [19.1mm] or 1" [25.4mm] thick 48# MDF that is precision
BAYOU Holzwerkstoffe GmbH
Content page 1 2 I. Birch Veneer Plywood page 3 4 Birch Construction Plywood, B/BB and S/BB, BFU 100 Birch Construction Plywood, BB/BB, BFU 100 Birch Model Plywood (aircraft plywood) Birch Plywood, B/BB,
Knoll Veneer Finishes Available for Knoll Office products
Core Finishes Antenna/ Telescope AutoStrada* Calibre Dividends Horizon* Morrison Reff Profiles* Rockwell Unscripted Series 2 Template* Tone 506C Maple 638B Blond Maple 637B Natural 2 639B Light Cherry
EXQUISITE WOOD FLOORING COLLECTION
EXQUISITE WOOD FLOORING COLLECTION CONTENTS BESPOKE FINISHING PG 4 BESPOKE FLOORING PG 5 11 14MM ENGINEERED PG 12 17 20MM ENGINEERED PG 18 19 20MM DESIGN PANELS PG 20 21 15 20MM BLOCKS AND CHEVRONS PG
Fenwick. elmwood fine custom cabinetry. scroll for more information. Prime Center Panel. Matching Raised Panel Option. General Specifications
General Specifications Door Construction: 5 Piece Wood Mortise & Tenon door. Center Panel Construction: 1/ Veneer Center Panel. See drawings for other available options. Rail/Stile Size Options: Default/Prime
Eurodekor thin boards Authentic surfaces and convincing properties
Eurodekor thin boards Authentic surfaces and convincing properties Eurodekor melamine-faced thin boards Melamine-faced boards offer multiple possibilities for use in furniture and interior design. Thanks
Contact Tel/Fax:
Contact Email: info@gdg-plywood.com Tel/Fax:0086-22-24312818 Chapter Film Faced Plywood Film Wiremeshed Plywood Commercial Plywood Birch Plywood Poplar Plywood Pine Plywood Veneered Fancy Plywood UV Lacquered
A Better Deal for Merchants Timbmet Services Merchant Product Range Responsible Business and Certification Marketing Support
Merchant Guide 2 Contents A Better Deal for Merchants 3 Timbmet Services 4 Merchant Product Range 6 Mouldings 6 Panels 6 Manufacturing Services 7 Sawn Hardwoods and Clear Softwoods 7 Hardwood Decking 8
Imola. elmwood fine custom cabinetry. scroll for more information. General Specifications. Prime Center Panel. Additional Panel Options
4.7 5. 5.7 General Specifications Door Construction: 5 Piece Wood Mortise & Tenon door. Center Panel Construction: 3/8 thick veneer flat center panel, virtually flush with back of rails. See drawings for
POCKET CATALOGUE Hwy 3 PO Box 190 Cayuga, ON N0A 1E0 talbotwood.com
POCKET CATALOGUE 5585 Hwy 3 PO Box 190 Cayuga, ON N0A 1E0 talbotwood.com CASINGS 9 INDEX Wood Species... 2 Our Products... 3 Casings... 4 Light Valance & Sills... 7 Backbands & Caps... 8 Casing Backband
2018 LAMINATE COLLECTION
2018 LAMINATE COLLECTION Blue 009 Blue 001 Blue 003 Blue 006 Cream 001 Cream 003 Maple 001 Beech 003 Oak 001 Ebony 001 Gold 002 Aluminium 002 Concrete 002 Pink 001 Grey 003 Grey 013 Green 010 Green 007
MDF 1-Piece / 3D Laminate (RTF)
abinet Doors & s MDF 1-Piece / 3D Laminate (RTF) MDF 1-Piece Doors & - Standard Style: 500* Style: 501* Style: 500 Style: 501 Raised Panel Style: 518 Style: 521 Style: 522 Style: 580* See next page for
Cabinetry Design and Planning Guide
Cabinetry Inc. Face Frame Styles Door Styles Wood Species Cabinet Finishing Accessories Cabinetry Design and Planning Guide Designed to make all our lives easier. Face Frame Styles Standard 2 Stiles and
Galtee Panels. Boutique Collection.
Boutique Collection www.galteewood.net page 2 Boutique Collection Bringing Colour to LIfe Look for FSC Certified Product Due to the printing process, colours of products may vary from the images shown.
Worldwide Wood Flooring Importers, Distributors & Agents
Worldwide Wood Flooring Importers, Distributors & Agents From beautiful sawn timber we bring you beautiful wood floors. 2 Worldwide Wood Flooring Importers, Distributors & Agents At Lionvest, we have one
A. All trim that has been damages, broken, or missing shall be repaired or replaced with material of the same size, shape, and type.
SECTION 062000 - FINISH CARPENTRY PART 1 - GENERAL 1.1 SECTION REQUIREMENTS A. All trim that has been damages, broken, or missing shall be repaired or replaced with material of the same size, shape, and
PiXL Independence. Technology Answer Booklet KS4. Wood. Contents: I. Multiple Choice Questions 10 credits in total
PiXL Independence Technology Answer Booklet KS4 Wood Contents: I. Multiple Choice Questions 10 credits in total II. III. Shorter Answer Questions 10 credits each Exam Style Questions 100 credits each 1
An Extensive Inventory of Premium Hardwood Lumber
L c x e P u m b e r M e l a m i n e H a r d w o o d P l y w o o d A r c h i t e t u r a l P a n e l s C o l o r e d C a u l k P a r t i c l e B o a r d E o t i c L u m b e r M D F V e n e e r M o u l d
ODEK shared 50% of Ukrainian plywood production in 2010, 48% in 2011 and 2012.
About Company The history of the plywood factory has started at the end of the XIX century when the Society of mechanical wood processing was founded in Orzhiv, Rivne region, Ukraine. Over a period of
FLAMEBREAK. Lippings & Facings 1. General: Rev.D
FLAMEBREAK Lippings & Facings 1 General: TM FLAMEBREAK Door Blanks are supplied with mixed tropical hardwood stiles and rails as part of the core structure. The stiles and bottom rail can be removed for
MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 08 - OPENINGS
SECTION 081433 - STILE AND RAIL WOOD DOORS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Exterior stile and rail wood doors and sidelites. 2. Interior stile and rail wood doors. 3. Interior fire-rated,
Making Tomorrow Safer
Making Tomorrow Safer Take a look through our brochure with handpicked photos of some of our work. You can find our news & contact details on our website www.humphreystretton.com Like what you see? Email
innovative panel products to make your life easier
innovative panel products to make your life easier The labour saving way to give the appearance of Tongue and Groove panelling without the problems of shrinkage YORK G416 Double V Groove and Bead Long
SLIDING DOOR SYSTEM_ S34 PRODUCT LIST. System description Accessories
SLIDING DOOR SYSTEM_ S34 PRODUCT LIST System description Accessories SLIDING DOOR SYSTEM_ S34 1.0_ System description_ page 03 2.0_ Profiles_ page 04 3.0_ Profile finishes_ page 08 4.0_ Panels_ page 09
Decra Burj - essentials www. toiletcubicles.org
Page 1 - Burj in wood finishes Page 2 - Burj in plain colours Decra Burj - essentials www. toiletcubicles.org Page 3 - Burj ironmongery Page 4 - Burj hardwood edge options Pages 5-8 Burj elevations Page
Panel Products. ABS/PVC Edging White 2.2. Veneer & White Melamine Edging 2.3. ABS & Melamine Edging - Decoline 2.4. Cleaner & Hot Melt Adhesives 2.
ABS/PVC Edging White. Veneer & White Melamine Edging.3 ABS & Melamine Edging - Decoline.4 Cleaner & Hot Melt Adhesives.5 Panels - MR MDF & MDF.7 Panels - HMR Particleboard White.8 Panels - HMR Particleboard
SPECIAL DOORS & FIRE DOORS
COMPLETE HIGH QUALITY SOLUTIONS SPECIAL DOORS & FIRE DOORS May 2016 Q U A L I T Y PERFORMANCE AT AN AFFORDABLE PRICE Syro Industry takes the problems out of door specification. Simply let us know your
FLEXWOOD FLEXWOOD ARCHITECTURAL PANELS WOODTRIM. Flexwood Flexwood WOW Prefinished Flexwood Flexwood PolyBak
FLEXWOOD FLEXWOOD Flexwood Flexwood WOW Prefinished Flexwood Flexwood PolyBak FLEXWOOD ARCHITECTURAL PANELS Sequenced Matched Blue Print Matched Cross Grain Panels Up to 5 x 12 and 12 x 5 Available Architectural
Wood Casework Construction Details
CASEWORK CONSTRUCTION DETAILS Overview Cabinets Mott casewk can meet the most demanding specification, whether it is AWI Premium an architect's 'signature' specification. We manufacture using premium grade
Technical product descriptions WORKTOPS STANDARD SLIM LINE. 1. Material thickness 38 mm. 2. Core/substrate material Chipboard
Technical product descriptions WORKTOPS I STANDARD 1. 38 mm 2. Chipboard 3. Surface material Laminate (CPL, HPL) 4. Laminate thickness 0,6-0,8 mm 5. Surface structure Wood pore or relief, matt, gloss 6.
Determining the Chip Load
Edge of Arlington Saw & Tool, Inc 124 So. Collins Street Arlington, Texas 76010 Office (817) 461-7171 Fax (817) 795-6651 eoasaw@mindspring.com Determining the Chip Load In order to determine the chip load
Hardwood plywood. It s as attractive as it is versatile, When you re dedicated to providing the most impressive
HARDWOOD PLYWOOD From seed to finish, we do it all. Hardwood plywood. It s as attractive as it is versatile, reflecting nature s understated beauty alongside technological breakthroughs. And for over 90
1 Panel Oak Flush Veneer
1 Panel Oak Flush Veneer The finest quality inlaid veneers create an exclusive look when a touch of luxury is required. Inlay veneer faces, fully lacquered with a solid core. Solid core construction gives
SOURCED FROM THE BALTIC. MANUFACTURED AS PER EUROPE. Kingdom Resources Baltic Birch Plywood Plant, Suqian City, Jiangsu Province, China
SOURCED FROM THE BALTIC. MANUFACTURED AS PER EUROPE. Kingdom Resources Baltic Birch Plywood Plant, Suqian City, Jiangsu Province, China The Kingdom Group Backed by 107 years of priceless experience in
FINISHES. Australasia s most adaptable range of architectural lining finishes
FINISHES Australasia s most adaptable range of architectural lining finishes Australia and New Zealand edition Concept veneers Natural timber veneers Laminates Solid colours Anodised & powder coated Australia
Standard Solo 8 planks in maple veneer with aligned 1/2 reveal create a panelized appearance. 1/2 Reveal. Plank thickness 5/8 (16 mm)
1/2 Reveal Solo is an acoustical wood plank consisting of a medium density fibreboard (MDF) finished in a natural wood veneer. The face is grooved, the plank is perforated from behind and the back is laminated
Man-made board page 1
Man-made board page 1 general - plywood - chipboard - edge laminated softwood board - blockboard - hardboard - mdf - stirling board General Store any sheet material in dry conditions, stacked flat. Do
PRICE BOOK APRIL 1, 2016 USAWOODDOOR.COM Rev. 3/1/16 Thorofare, NJ
PRICE BOOK APRIL 1, 2016 USAWOODDOOR.COM 856-384-9663 Rev. 3/1/16 Thorofare, NJ 877-950-3667 USA WOOD DOOR PRODUCTS AND SERVICES MOHAWK ALGOMA MASONITE MANUFACTURER'S PREFINISH COLORS IN STOCK CUSTOM
WOOD COLLECTION GENERAL INFORMATION / LIMITED WARRANTY. MITRED MORTISE & TENON SHAKER MDF FIVE PIECE.
GENERAL INFORMATION / LIMITED WARRANTY WOOD COLLECTION CHANGES TO ORDER LEAD TIME Changes to an order can not be made once the order is in production. An order can go into production as early as 24 hours
PRODUCT CATALOGUE OAK AND ASH FLOOR BOARDS PARQUET SKIRTING BOARDS
PRODUCT CATALOGUE OAK AND ASH FLOOR BOARDS BOARDS Trade mark Stalgen has been created by company Amber Wood describing different hardwood products - solid floor boards, solid parquet, engineered floor
LAMINEX COMMERCIAL PALETTE
LAMINEX COMMERCIAL PALETTE The Laminex Commercial Palette features harmonious decors for commercial environments that reflect current trends. Office environments are being driven by design, with businesses
Perforated. Timber Acoustic Panels
Perforated Timber Acoustic Panels 2 Perforated timber acoustic panels Combining carpentry expertise with acoustic knowledge to give maximum control over sound and aesthetics Groove panels Perforated acoustic
VCE VET FURNISHING (CABINET MAKING)
Victorian Certificate of Education 2002 SUPERVISOR TO ATTACH PROCESSING LABEL HERE Figures Words STUDENT NUMBER Letter VCE VET FURNISHING (CABINET MAKING) Written examination Friday 1 November 2002 Reading
Forest Hill. elmwood fine custom cabinetry. Prime Center Panel. scroll for more information. Additional Flat Panel Options. General Specifications
5.2 General Specifications Door Construction: 5 Piece Wood Mortise & Tenon door. Center Panel Construction: 3/8 thick veneer center panel. See drawings for other available options. Rail/Stile Size Options:
MDF 1-Piece / 3D Laminate (RTF)
abinet Door & Drawer Front Options MDF 1-Piece / 3D Laminate (RTF) Raw MDF Door & Drawer Front onstruction and Ordering MDF doors and drawer fronts are constructed of premium, ¾" [19.1mm] or 1" [25.4mm]
A F LCON PANEL PRODUCTS LTD
FA LCON PANEL PRODUCTS LTD Introduction to Strebord $ Strebord 35+, 38+, 44, 54 & Superpan Materials are purpose made, multi-layer particle boards designed specifically for use in the manufacture of high
Neutrals, whites & greys. D&R Henderson Melamine
Neutrals, whites & greys Create a versatile colour palette that allows you to achieve a fresh modern look that never goes out of style. Antique Cream New Oyster Fossick Florentine Grey Porcelain Light
Cornwall Wood Treatment Services Ltd. Trade Stock List x 1220 x 3.2mm x 1220 x 18mm 2440 x 1220 x 25mm
Cornwall Wood Treatment Services Ltd Suppliers of Timber and Timber Products www.cornwallwood.co.uk January 2018 Opening hours: 8.00am 5.00pm Monday to Friday (summer) 8.00am 4.30pm Monday to Friday (winter)
Sustainable creativity!
Sustainable creativity! ENG a product of Decospan 2 LL54 Dark Lime Looks & Likes As a designer you love to work with attractive materials but your focus is also on economic and ecological solutions. Look
EXECUTIVE LOCKERS AND BENCHES
EXECUTIVE LOCKERS AND BENCHES 00 IMAGE 1000 SERIES FURNITURE QUALITY & ECONOMY GRADE Custom and Standard Designs Thermal-Fused Melamine 40 Standard Colors One Year Warranty Material: 48 lb. density, industrial
Products that deliver. the difference PACIFIC NORTHWEST DIVISION
Products that deliver the difference PACIFIC NORTHWEST DIVISION Decorative Surfaces TFL Prism Arauco s largest TFL collection ever offers nearly 100 of the most contemporary solid colors, prints and woodgrains.
Quality Lumber at Affordable Prices
Ocooch Hardwoods 14860 County Hwy. E Viola, WI 54664 2013 Quality Lumber at Affordable Prices To order, call toll free 1-888-322-2432 Order online at: www.ocoochhardwoods.com Welcome To Ocooch Hardwoods
Style & Functionality
Style & Functionality DISCOVER OUR WIDE SELECTION OF INTERIOR MOLDINGS AND PANELS MALER MOLDINGS We manufacture a wide variety of interior moldings with the raw materials ranging between MDF, pine, hardwood
Bovard Studios Inc. Section April 6, 2004 Page 1
April 6, 2004 Page 1 This section includes solid flush and surface articulated wood doors, may have veneer facing, solid or glazed (stained glass) design, factory pre-fit, may be factory finished or site
Auction Inventory. Some Inventory may change prior to auction date. Peak Auction Kitchen Cabinet Sets. 36" Wall Cabinets 8pc-9pc- 10pc Sets
Peak Auctioneering -- Building Material Auction Specialists P.O. Box 014141 Kansas City, MO 64101 Office (816)474-1982; Fax (816)474-4405 www.peakauction.com Style Style Auction Inventory 30" Wall Cabinets