Installation manual. BB LEDlightpipe EVO

Transcription

1 Installation manual BB LEDlightpipe EVO BB-Lightonepts a division of TKH Parking Solutions B.V. Fabriekstraat AR Doetinhem (Netherlands) BB-Lightonepts manual BB LEDlightpipe EVO version 3.0 We reserve the right to make hanges without prior notie

2 Table of ontents: 1.Introdution 2.BB LEDlightpipe EVO omponents and modules 3.Light-tubes 4.LED unit 5.LED driver module 6.BB LEDlightpipe type's 7.Produttable 8.Braket types 9.Infeed BB LEDlightpipes 10.Conneting BB LEDlightpipe lines 11.Conneting "split in two parts" BB LEDlightpipes 12.Stand alone luminairs: BB LEDlightpipe ECO, 4 types 13.BB LEDlightpipe ECO with integrated Emergeny light 14.BB LEDlightpipe ECO, integrated PIR sensor 15.Parkguidane 16.Integrated ertified evauation / broadasting system Page BB-Lightonepts manual BB LEDlightpipe EVO version 3.0

3 1.Introdution The BB LEDlightpipe is a modular build luminaire onept. A standarized LED unit beams the light into a polyarbonat tube. Optial foils are mounted inside the tube to transport and extrat the light over the length of the tube. An absolute glare free lightdistribution is ahieved. Due to this modularity a great number of different luminaires, lengths from 2,3 meters up to 12 meters and luminous output up to Lumens, are available. All luminairs are standard DALI ontrolled, other options 1-10V or Dynadim are also available. The olor temperature is 5000 Kelvin, if not speified differently. Colors from minimum 2700 K to maximal 6500 K an be ordered as well. All luminaires an be used in a line setup or as stand alone luminaire and ontain plug and play onnetors. The ECO is espeially designed for the retrofit market. BB LEDlightpipes in a line setup an be extended with a fully integrated Park guidane and sound or evauation system. Input voltage Frequeny Rated Power Va Hz Watt (UL version) or (EU version) 50/60 40, 81 or 162 Type: EVO B EB Dimming signal Shok resistane Insulation lass Dust/waterresistane DALI IK 10+ lass I IP 66 Input: V~ 50/60 Hz Ta -40/+50 _C IP 66 BB Lightonepts.eu LED type LED iruits LED protetion NICHIA, high power erami NO parallel iruits NTC on LED boards Certifiates: Produt label Ambient temperature Color temperature All wires LSZH Luminous flux ºC K Lumen -40ºC/ +50ºC 5000 (standard) 2700 K K (low smoke zero halogen) 3275 for luminairs with 1 LEDunit 6550 for luminairs with 2 LEDunits for luminairs with 4 LEDunits IEC (ed.7), IEC (ed.1 );am1, IEC 62031(ed.1) EN 55015:2006 +A1:2007, +A2:2009 EN :2006 +A1:2009, +A2:2009 EN :2008 EN 61547:2009 EN :2009 EN :2006 +A1:2008, +A2:2010 EN :2012 EN :2006 EN :2009 EN :2010 EN :2004 Emission for lighting equipment Harmoni urrent emmisions Limitation of voltage flutuations Produt group immunity standard lighting equipment Eletrostati disharge (ESD) immunity RadiatedEletro-Magneti field immunity Eletrial fast transient (EFT) immunity Surge transient immunity Conduted Radio-Frequeny disturbanes immunity Power frequeny magneti field immunity Immunity to voltage dips and short interrupts 2015 BB-Lightonepts manual BB LEDlightpipe EVO version 3.0 Page 1

4 2.BB LEDlightpipe EVO omponents and modules The BB LEDlightpipe EVO is a modular lighting sytem, suitable for ontinuous light lines or stand alone luminairs. The luminairs for the light lines are equipped with a plug&play onnetor system for a fast and seure installation. The luminairs for stand alone are equipped with standard terminal bloks. All BB LEDlightpipes EVO an be wired through to the other end, so-alled wired versions. The last BB LEDlightpipe in a line does not ontain wires, so-alled end versions. The lighttube omes with two different lengths, L1 and L2 and an ontain either one (mono) or two (bi)ledunits. Pop rivet Mounting braket Braket is moveable E box Internal wires Lighttube Output onnetor LED driver Input onnetor Tube stop LED Unit 2015 BB-Lightonepts manual BB LEDlightpipe EVO version 3.0 Page 2

5 3.Light-tubes The lighttube is available in 2 different standard lengths and 2 versions, mono and bi. All lighttubes are IP66. 4.LED unit LEDunit ontaining, Lighttube mono Lighttube bi - up to 18 NICHIA erami power LED's - a NTC resistor for thermal protetion - all mounted on a metall ore pb - rigid aluminum heat sink to ondut the heat to the aluminum profiles - a lens to beam the light into the tube - a rigid seal (no rubber) to seal the tube IP66 - a devie to aerate the tub Replaeable LED pboard Lumenmaintenane LED (IEC PAS 62717) L90F50= h meaning: after h: 50% of the LEDs produe <= 90% of the initial luminous flux 50% of the LEDs produe > 90% of the initial luminous flux 5.LED driver module wired version ( standard 1 Phase ) end version (no internal wires) Internal wires 1 phase is standard 3 phase on request Input onnetor BB-Lightonepts manual BB LEDlightpipe EVO version 3.0 LED driver 150 W to ontrol 4 LED units Features LEDdrivers: LED driver 75 W to ontrol 2 LED units LED driver 40 W to ontrol 1 LED unit - Programmable - DALI dimmable, onstant urrent, NO puls width modulation - TC 70 C is hr - Maximum number on MCB-B 16A, 9 ps for 150W, 10 ps for 75W and 31 ps for 40W this number an be inreased by using an inrush urrent limiter for example NOT inluded in delivery - IP66 - Ambient temperature -40 C to +55 C - Thermal protetion Page 3

6 LEDLightpipe type's Length Wired/End mounting braket see page Produt table Length Weigth Nr. Produtnumber L (m) L (ft) Pow er (W) W (Kg) W (pound) Comment 1 ECO see page 9, 10, ,921' 40,5 7 15,4 standard 1 fase internal w ires 2 EB2,2-1W or EB2,2-1E 2.2 7,218' 40,5 9 19,8 w ired or end 3 EB2,2-2W or EB2,2-2E 2.2 7,218' w ired or end 4 EB3,2-1W or EB3,2-1E ,499' 40, ,5 w ired or end 5 EB3,2-2W or EB3,2-2E ,499' ,3 w ired or end 6 EB4-2W or EB4-2E 4 13,123' ,7 w ired or end 7 EB4-4W or EB4-4E 4 13,123' ,1 w ired or end 8 EB6-2W or EB6-2E 6 19,685' ,8 w ired or end 9 EB6-4W or EB6-4E 6 19,685' ,3 w ired or end 10 EB8-4W or EB8-4E 8 26,247' ,3 onsists of 2 Parts (A and B) 11 EB12-4W or EB12-4E 12 39,37' ,7 onsists of 2 Parts (A and B) Produt Nr. Option odes EB12-4 W - 3K - PIR - 3PH - CB - CM11,6-1-10V - EL EL = Emergeny light 1-10V, DALI if not speified CM = Custom length 11,6 mtr CB = Channel braket, SB standard braket if not speified 3PH = 3 phase internal wires, 1 Phase if not speified PIR = motion sensor 3K = 3000K, 5000K if not speified W = Wired E = End (with or without internal wires) 4 = 4 ledunits 12 = length of the luminaire in meters EB = EVO B series 2015 BB-Lightonepts manual BB LEDlightpipe EVO version 3.0 Page 4

7 8.Braket types Standard Braket SB nr.2977 Rigid braket RB nr ,181" Exhange braket EB nr ,984" 150 5,906" Metall plug (FDN 6-45 Fisher) 148 5,827" 130 5,118" 112 4,429" 114 4,505" M8 Channel braket CB nr _ braket DB nr ,322" 153 6,018" Cable hannel nr ,115" 60 2,362" All standard brakets are made of stainless steel (AISI304). Other materials are available on request. Speial brakets or suspensions an be developed in o-operation with the engineering department BB-Lightonepts manual BB LEDlightpipe EVO version ,167" Page 5

8 9.Infeed BB LEDlightpipes Infeed luminaire (delivered with luminaire) Cover nr.5248 Dis set nr.5257 Wago N, GND, L, DA, DA optional 3 phase setup Wago N, GND, L1, L2, L3 Wago DA, DA Conneted Infeed line (optional) Cover line nr.5247 Infeed set nr.5025 Top infeed Front infeed optional able Conneted optional AC/DC onverter for Park Assist L4 module 2015 BB-Lightonepts manual BB LEDlightpipe EVO version 3.0 Page 6

9 10.Conneting BB LEDlightpipe lines The BB LEDlightpipe ontains internal wires for making ontinuous lightlines with one infeed point. The standard setup is single phase and DALI. A three phase plus DALI internal wiring is an option. The phase seletion for the individual luminaire an be done on the wago onnetor sine it has two ontats per pole. EB..-.W EB..-.W/E LEDlightpipe fixed 5 mm play 0,197" unsrew the bolts slide output onnetors move input onnetors (power + led) Conneted situation onnetor onfigurations 1 Phase setup 3 Phase setup All onnetors are WAGO winsta series L gnd N L3 L2 L1 gnd N Phase seletion Connet the LIVE wire (blak) from the LED driver to L1, L2 or L3. Standard onneted to L BB-Lightonepts manual BB LEDlightpipe EVO version 3.0 Page 7

10 11.Conneting "split in two parts" BB LEDlightpipes The EB8 and EB12 are too long for one piee and for that reason onsist of two separate parts to be onneted in the mounting proess. The LEDdriver is suited in the first part A. Part B ontains the optional powersupply for the parkguidane. There are two possible onnetor onfigurations, a 1 phase + DALI and a 3 phase + DALI setup. A onnetor in the middle ompletes the LEDiruit. Part A Part B Part A fixed Part B Part A Part B 5 mm play 0,197" unsrew the bolts slide move Conneted situation output onnetors Part A input onnetors (power + led iruit) Part B onnetor onfigurations L gnd N LEDiruit + LEDiruit - 1 Phase setup Phase setup L3 L2 L1 gnd N LEDiruit + LEDiruit Optional powersupply for Park Assist L4 module All onnetors are WAGO winsta series BB-Lightonepts manual BB LEDlightpipe EVO version Page 8

11 12. Stand alone luminairs: BB LEDlightpipe ECO, 4 types A lot of existing installations ontain stand alone fluoresent luminairs.the BB LEDlightpipe is suiteable to update these installations without the need to modify the existing abling lay-out. A build in adjustable motion sensor even enlarges the energy saving potential.the build in emergeny light has a battery inside and a LED indiator outside to show its status ,142" ECO ECO- DALI ,142" ECO-Sensor PIR sensor ,22" ECO-EL emergeny light P ,22" ECO-Sensor-EL PIR sensor EL motion sensor 124 4,878" Emergeny light 2015 BB-Lightonepts manual BB LEDlightpipe EVO version ,217" Front view P Page 9

12 13.BB LEDlightpipe ECO with integrated emergeny light, ECO EL For onneting loosen the srews and take off the overs. (all ECO models) Glands not inluded in delivery. (all ECO models) mountbrakets not inluded in delivery. (all ECO models) End onnetor Wago (all ECO models) Internal wires, N,L and GND, setion 1,5 mm² (all ECO models) Light distribution Famostar CELO End onnetor Wago (all ECO models) LED Emergeny light type: Famostar CELO CT8 VA-1 C total flux 100 Lumen total onneted power 1W 2015 BB-Lightonepts manual BB LEDlightpipe EVO version 3.0 Page 10

13 14.BB LEDlightpipe ECO, integrated PIR sensor, ECO-Sensor A ,024" Cover with integrated motion sensor 90 Detetion angle Settings: DIM level Time on View A A Detail A Dipswithes % % % % % Se Se Se Se Se Se Se Se Se Se Se Se Se Se Se 2015 BB-Lightonepts manual BB LEDlightpipe EVO version 3.0 Page 11

14 15.Parkguidane The Park Assist L4 modules an be plaed on top of the BB LEDlightpipe. The modules are a able hannel, power on ethernet devie, ethernet ables, L4 module and movable overs. Power on ethernet module Top View 24V DC Powersupply Slide overs L4 module liks on top Cable hannel Side View Side View 2015 BB-Lightonepts manual BB LEDlightpipe EVO version 3.0 Page 12

15 16.Integrated ertified evauation / broadasting system The integrated evauation and broadasting system is available for EVO 12 and EVO 8 LED lines. The ertified speaker is added in between the lighttubes of part B of the luminaire. The total length inreases with 250 mm. An isolator is mounted with eah speaker and in ase of fire or aident the isolator will shut of the affeted speakers. The rest off the speaker will remain intat due to the loop onfiguration. Part A ,685' EVO ,19' Part B ,505' EVO 12 or 8 Isolator Speaker integrated in part B of the EB 12 or mm extra length Central ontrol unit Speaker tested a. To EN54-24 Manufatured by DNH A/S Norway 2015 BB-Lightonepts manual BB LEDlightpipe EVO version 3.0 Page 13