aerocom Datasheet Systemdescription AC 660 Maximum number of stations: Maximum number of zones: Directions: Diverters: Mode of operation:
|
|
- Clarissa Franklin
- 5 years ago
- Views:
Transcription
1 Maximum number of stations: 1 main-station and up to 98 sub-stations Maximum number of zones: 1 Directions: One way and bi-directional with diverters Diverters: 2-way, 3-way, 4-way Mode of operation: Reversing system for the transportation between 1 main-station and up to 98 sub-stations. The main-station can communicate with each sub-station and each sub-station can communicate with the main-station. The sub-stations cannot correspond with each other. It is especially designed for CashHandling-applications. Main station Use as: Tube diameter Sub station OD 63 OD 90 OD 110 OD 160 EWS Station Types Slide Station OEopen-end-station System example: by Technical alterations reserved. K:Dokumentationen_PDF/English/AC 660/s Bi-Directional: This Pneumatic Tube System shows an EWS-station as a main station and slide stations as sub stations. At the EWS, independent from the status of operation, at each time a carrier can be stored. One direction: Sending stations can be connected in sequence and are easy to install with Y-tubes e V1.0 AC 660 Systemdescription Page 1/5
2 Operation panel AC 6600 at the Main-Station for programming and reporting Operation Panel for Sub-Stations Illuminated graphic display, Keypad for entering the amount, identification code or carrier number. 3-way diverter AC 6600 with controller board Features Fully automatic and programmable microprocessor controlled system. Does not require a dedicated PC. Central control unit (CCU) in rugged metal cabinet equipped with keypad and large graphic display for easy reading and programming. System can be composed of any combination of valves (slidegates), diverters (2,3 and 4 way), EWS stations, rotary valves, conveyers (lift stations), lockable doors/slidestations/safes. Up to 250 devices maximum, allowing almost infinite system configurations! One direction or bi-directional system, with or without a bypass. Soft landings (pneumatic deceleration of carriers). Up to 99 stations. Transits can be requested by send switch, carrier sensor or keypad. Optional station operation panels provide clear feedback and allow recording of transaction details such as user, cash value, register number, receipt number, etc. RFID option also available. Manual or automatic purging on failed transits. Simple and self-intuitive menu system at the CCU for both system operation and programming. At the CCU (Cash office) there are different password levels for operators/ administrators/ managers User list provides identification and access control facilities suitable for tracking cash and other valuables. Up to 99 section sensors for positive carrier location. Up to 99 printers, fully configurable for accounting, user transactions, error reporting, etc. System data, topography and actual data are stored, also in case of power failure Extensive error detection and self-healing facilities. Storage of last 5000 operations in system log which can be accessed and printed via intelligent log searching functions: by type, user, time and date, station, session reports, etc. CCU operators can disable stations and printers for security or other isolation requirements. Flexible turbine direction control by rotary valve, diverter, slidegate, VFD, etc. Feature rich audit system allows detailed investigations of cash movements. Numerous customisable counters and displays: carriers received, total cash, session details, status, etc. Transfer of multiple carriers in a single transit for high volume stations. Cashier identification with Pin-Code Option: RFID reader equipped at the main station/treasury or cashier identification Safe facilities for one or multiple safes with after-hours diversion options. Special features for external (third party) safe emptyers / money collecters. Connectivity to PC (serial) or internet (Ethernet) for remote monitoring and control and program updates. Comprehensive system diagnostics from the CCU allows remote testing of stations, device, printers, etc e V1.0 AC 660 Systemdescription Page 2/5
3 Simple one-way-configuration: Each station can be triggered by a carrier sensor or send-switch with a retaining latch for security Simple one-way-configuration: Each station has a operation panel for send identification / security functions Simple one-way-configuration with additional return line: Each station has a operation panel Return-Receiving station can be a lockable receiving cabinet e V1.0 AC 660 Systemdescription Page 3/5
4 Simple 2-way point-to-point configuration: Open end station and slide station for sending and receiving Each station can be triggered by sending switch or carrier sensor Sending and receiving slide station Each station can be triggered by sending switch or carrier sensor Receiving station is lockable for of security Cash-office sending station is for returning empty carrier and change to any station Receiving station is lockable because of security Separate sending and receiving station in the cash-office Cash-office sending station is returning empty carrier and change to any station e V1.0 AC 660 Systemdescription Page 4/5
5 Each station has a operation panel for security access Receiving station is lockable because of security Separate sending and receiving station in the cash-office Cash-office sending station is returning empty carrier and change to any station e V1.0 AC 660 Systemdescription Page 5/5
ACD3180 Card Dispenser/Encoder System. User Manual and Setup Guide. Choose ACDI for all your document vending needs
ACD3180 Card Dispenser/Encoder System User Manual and Setup Guide Choose ACDI for all your document vending needs INTRODUCTION... 1 OVERVIEW... 1 SETUP... 2 UNPACKING THE DISPENSER SYSTEM... 2 PHYSICAL
More informationAlemite FCS Fluid Control System
343000 343000-1 Alemite FCS Fluid Control System Installation and Operation Guide 670996 TABLE OF CONTENTS DISCLAIMER... 3 BEFORE YOU BEGIN........................................................ 4 1.0
More informationMeasuring systems for ironing rings and punches
Measuring systems for ironing rings and punches Equipment and proven technology for precision tooling measurement in beverage can industry RINGMASTER THE MASTER TOOL FOR RING MEASURE MENT RINGMASTER provides
More informationAutomatic Capacitor Testing System Model AE 1000RD
TESTING & SORTING Automatic Capacitor Testing System Model AE 1000RD Features Designed to perform DC short clearing by applying upto 5000V DC gradually under different stations, followed by measuring the
More informationVARIABLE FREQUENCY DRIVE SPECIFICATION
VARIABLE FREQUENCY DRIVE SPECIFICATION 1.0. SUMMARY The use of variable frequency drives (VFDs) in conjunction with wastewater lift stations has been identified as a means improve efficiency and to moderate
More informationInstallation Guide. Coin changer Goe/Schn/KQu KA_c²_US_1-0
Installation Guide Coin changer 02.12 Goe/Schn/KQu KA_c²_US_1-0 Crane Payment Solutions GmbH Zum Fruchthof 6 21614 Buxtehude Germany Web: info@craneps.com www.craneps.com Phone: +49 (0) 41 61-729-0 Fax:
More informationVisorTrac A Tracking System for Mining
VisorTrac A Tracking System for Mining Marco North America, Inc. SYSTEM APPLICATION The VISORTRAC system was developed to allow tracking of mining personnel as well as mining vehicles. The VISORTRAC system
More informationUSER MANUAL. EPP Intelligent Positioner Control Unit 1/22.
USER MANUAL - Intelligent Positioner Control Unit 1/22 Table of contents: 1 General... 3 1.1 Safety instructions... 3 2 Application... 4 3 Electrical specifications and terminals... 5 3.1 Control loop...
More informationCHAPTER 1 INTRODUCTION...
GSE 460 and 465 Technical Reference Manual Manual TABLE OF CONTENTS CHAPTER 1 INTRODUCTION...1-1 INTRODUCTION...1-2 About This Manual...1-2 Conventions...1-2 CHAPTER 2 INSTALLATION...2-1 INSTALLATION...2-1
More informationvacon 100 flow ac drives application manual
vacon 100 flow ac drives application manual vacon 1 TABLE OF CONTENTS Document: DPD01083A Version release date: 16.11.12 Corresponds to software package FW0159V121106.vcx 1. Vacon 100 FLOW - Quick Startup
More informationINCLINED PLANE RIG LABORATORY USER GUIDE VERSION 1.3
INCLINED PLANE RIG LABORATORY USER GUIDE VERSION 1.3 Labshare 2011 Table of Contents 1 Introduction... 3 1.1 Remote Laboratories... 3 1.2 Inclined Plane - The Rig Apparatus... 3 1.2.1 Block Masses & Inclining
More informationSPECIFICATION NO Model Automatic GTAW Welding System
1.0 Introduction The Model 227-3 is a completely self-contained Gas Tungsten Arc Welding (GTAW) System requiring only input power, inert gas and AMI Welding Head (or manual torch) for operation. Its small
More informationS11 Adjustable Speed Drive Engineering Specification
PART 1 - GENERAL 1.0 Scope This specification shall cover Toshiba S11 AC Variable Frequency Drives, 6 pulse for 3- phase 200-240VAC, 380-500VAC and single phase 200V to 240VAC. 1.1 References A. National
More informationGeneric Specifications for a. HOLZMA HPP 350 with Cadmatic 4.0
Holzma s HPP 350 is a flexible saw center. This CNC controlled machine features fast, simple programming coupled with high operating speeds to meet today s varied production requirements. Designed for
More informationPROGRAMMABLE AC POWER SOURCE MODEL 6500 SERIES MODEL 6500 SERIES. Programmable AC Power Source. Key Features:
Programmable AC Power Source MODEL 6500 SERIES Key Features: PROGRAMMABLE AC POWER SOURCE MODEL 6500 SERIES The global AC power testing requirements demand more sophisticated AC Power Source that is capable
More informationINTRODUCTION. Bills (loose) Coins (loose, rolled) Using the Cashmaster you will notice some changes in the way you work:
User Manual CONTENTS Introduction.............. 1 Box items and guidelines... 2 Charging.. 2 Unpacking... 3 Warning...... 3 The main parts of the Cashmaster... 4 Keys and display The keypad......... 5
More informationAC and DC solutions- Multiple AC and DC solutions available, please contact factory for your application.
The ATX-3000 antenna tracking controller is a user-friendly microprocessor-based intelligent positioning system to reliably track inclined orbit satellites or for use as a positioner for geosynchronous
More informationDC Electronic Loads 8500 series
Data sheet DC Electronic Loads 8500 series 2400W 600 W - 1200 W 300 W Versatile & Economical DC Electronic Loads The 8500 series Programmable DC Electronic Loads can be used for testing and evaluating
More informationUSER MANUAL ENGLISH 1450 COIN COUNTER & SORTER
USER MANUAL ENGLISH 1450 COIN COUNTER & SORTER INTRODUCTION ENGLISH Thank you for purchasing the Safescan 1450 coin counter and sorter. For proper use and maintenance, we advise to read this user manual
More informationTS16 - Pre-Instructional Survey
TS16 - Pre-Instructional Survey Name: Date 1. What do you understand by the term Digital Transmitter? a. A transmitter that auto-configures and auto-calibrates itself. b. A transmitter that can be configured
More informationOperating Instructions
TG 310CS Coin Counting - and Sorting Machine Operating Instructions Total Postweigh International Ltd. 1 Skelgillside Alston, Cumbria CA9 3TR Telephone: 01434 381182 Facsimile: 01434 382035 www.postweigh.com
More informationFREE YOURSELF FROM CABLES! SOLUTIONS. secure solutions for radio control of industrial lifting and handling machinery
FREE YOURSELF FROM CABLES! SOLUTIONS secure solutions for radio control of industrial lifting and handling machinery ERGONOMIC Very special care has been taken in the design and ergonomics of our solutions
More informationTester 5 provide new unique features that make stand-alone operation even more powerful:
New Features Release 3.20 of the PROFIBUS Diagnostics Suite and the included Firmware 1.02.00.00 for the PROFIBUS Tester 5 provide new unique features that make stand-alone operation even more powerful:
More informationObserve all necessary safety precautions when controlling the soft starter remotely. Alert personnel that machinery may start without warning.
Important User Information DeviceNet Module Instructions Observe all necessary safety precautions when controlling the soft starter remotely. Alert personnel that machinery may start without warning. It
More informationMICO Intelligent Power
MICO Intelligent Power Distribution Monitor Detect React First Class Power Distribution MICO is the intelligent power distribution module from Murrelektronik for 24 V DC. It monitors currents, indicates
More informationFM125 & FM126 Service Guide
FM125 & FM126 Service Guide FM125-0022 & FM125-0024 Repair Kit 1 2 3 4 #1-1 Pc. FM125-5012 Ball Carrier Installation Tool (FM125-0022 Only) #2-2 Pcs. P5-287-R0 O-Ring #3-2 Pcs. P5-067-R2 O-Ring #4-1 Pc.
More informationThe Torxis Linear Servo meets the following environmental conditions:
Page: 1 1. PRODUCT DESCRIPTION The Torxis Linear Servo is the second generation of linear servos provided by GearWurx. This product features internal position sensing, and closed loop position control.
More informationVF-nC1 Adjustable Speed Drive Engineering Specification
PART 1 - GENERAL 1.0 Scope This specification shall cover Toshiba VF-nC1 AC Variable Frequency Drives, 6 pulse for 100V single-phase 0.1 to 0.75kW, 200V single-phase 0.2 to 2.2kW and 200V threephase 0.1
More informationThe Scope of Computer Control within Technology
The Scope of Computer Control within Technology Computer control offers a productive medium for making progress in the study of systems within Technology. In this review Mike Bostock explains where control
More informationOil Monitoring System
Q.A.M. QUADRA ADVANCED MONITORING quality certified ISO 9001 : 2008 Oil Monitoring System Quadra Advanced Monitoring (QAM) is operateing with pulser meters and solenoid valves fitted into the fluid delivery
More informationCSNC CARBIDE CIRCULAR SERIES
CSNC CARBIDE CIRCULAR SERIES HIGHLY EFFICIENT AND PRODUCTIVE HIGH SPEED CIRCULAR SAWING MACHINES CARBIDE SAWS DO THE WORK OF FIVE CONVENTIONAL FACTORY BAND SAWS, WITHOUT SACRIFICING QUALITY. GET THE CLOSE-CUT
More informationINTREPID Model 336 Digital Microwave Link
Southwest Microwave, Inc. 9055 S. McKemy Street Tempe, Arizona 85284 USA +1(480) 783-0201 Fax +1(480) 783-0401 Product Specifications INTREPID Model 336 Digital Microwave Link Purpose of document This
More information3500/46M Hydro Monitor
3500/46M Hydro Monitor Smart Monitoring for the Intelligent Machine Age Mark Snyder Bently Nevada Senior Field Application Engineer mark.snyder@ge.com Older machinery protection systems, and even transmitters
More informationQuidoDuplex. Two-state signal over-ethernet transmission set based on I/O module Quido. 12. July 2017 w w w. p a p o u c h. c o m
Two-state signal over-ethernet transmission set based on I/O module Quido 12. July 2017 w w w. p a p o u c h. c o m Q uidoduplex Datasheet Created: 3/16/2006 Last update: 7/12/2017 1:28 PM Number of pages:
More informationGeneral purpose Signal generation and analysis. Well-equipped for field and lab the R&S Spectrum Rider
General purpose Signal generation and analysis Well-equipped for field and lab the R&S Spectrum Rider 32 The new R&S Spectrum Rider makes spectrum analysis in the field and lab easier, faster and more
More informationSeries 70 Servo NXT - Modulating Controller Installation, Operation and Maintenance Manual
THE HIGH PERFORMANCE COMPANY Series 70 Hold 1 sec. Hold 1 sec. FOR MORE INFORMATION ON THIS PRODUCT AND OTHER BRAY PRODUCTS PLEASE VISIT OUR WEBSITE www.bray.com Table of Contents 1. Definition of Terms.........................................2
More informationHOMMEL-MOVOMATIC Standard products and application guide
OPTICAL SYSTEMS LASERS & MATERIAL PROCESSING INDUSTRIAL METROLOGY TRAFFIC SOLUTIONS DEFENSE & CIVIL SYSTEMS HOMMEL-MOVOMATIC Standard products and application guide Precision is our business. Your partner
More informationUltrasonic level transmitter, non-contact
Ultrasonic level transmitter, non-contact Type 8175 can be combined with... Compact, remote versions for level measurement up to 10 m Multi language menu control Interference echo filter Automatic calibration:
More informationMicrologic control units 2.0 E X Y Z. Overview of functions. Functions and characteristics
Overview of functions All Masterpact circuit breakers are equipped with a Micrologic control unit that can be changed on site. Control units are designed to protect Power circuits and loads. Alarms may
More informationSet-up Manual. for. coin counting and sorting machine. Pelican type V, 305 S+ 24V and 309 S+ 24V. Version:
Set-up Manual for coin counting and sorting machine Pelican type 301 + 24V, 305 S+ 24V and 309 S+ 24V Version: 13.01.2011 Produced by: CTcoin A/S Helsingborggade 9 DK-5000 Odense C Denmark Phone: +45 63
More informationPOWER CUBE SA/80 series
POWER CUBE SA/80 series The 100, 50, 25 kw Green Generators Features / Benefits High Power output High level of performance with minimal operating costs Automatic tracking and best optimization to load
More informationASTRO/Intercom System
ASTRO/Intercom System SISTEMA QUALITÀ CERTIFICATO ISO 9001 ISO 9001 CERTIFIED SYSTEM QUALITY F I T R E S.p.A. 20142 MILANO ITALIA via Valsolda, 15 tel.: +39.02.8959.01 fax: +39.02.8959.0400 e-mail: fitre@fitre.it
More informationDATAVS2 series.
VISION SENSORS DATAVS2 series The DATAVS2 vision sensor series presents all the characteristics able to solve artificial machine vision applications in a flexible and intuitive way. DATAVS2 is a completely
More informationRESTAURANT MANAGEMENT for WINDOWS. GIFT CARD Version
RESTAURANT MANAGEMENT for WINDOWS GIFT CARD Version 5.53.00 Introduction Overview What Profitek Gift Card Does? The Profitek Gift Card program will allow you to offer your customers a way of purchasing
More informationSpeedTouch 190. Setup and User s Guide. SIP Gateway. Release R1.0
SpeedTouch 190 SIP Gateway Setup and User s Guide Release R1.0 SpeedTouch 190 Setup and User s Guide Release R1.0 Status v1.0 Reference E-DOC-CTC-20040401-0004 Short Title Setup and User s Guide ST190
More informationSCHEDULE WORKSHEET SCHEDULE #
SCHEDULE WORKSHEET SCHEDULE # CONTACTOR # SQUEEZE TIME Cycles VALVE SELECTION Q V1 Q V2 Q V3 Q V4 Q V5 Q V6 Q V7 Q V8 SQUEEZE PRESSURE/FORCE (PV) PSI / Lb / ma PRESSURE/FORCE SENSE MODE Q Off Q Rising
More informationDC Electronic Loads 8500 Series
Data Sheet DC Electronic Loads 2400W 600 W - 1200 W 300 W Versatile & Economical DC Electronic Loads The 8500 series Programmable DC Electronic Loads can be used for testing and evaluating a variety of
More informationCMM-Manager. Fully featured metrology software for CNC, manual and portable CMMs. nikon metrology I vision beyond precision
CMM-Manager Fully featured metrology software for CNC, manual and portable CMMs nikon metrology I vision beyond precision Easy to use, rich functionalities CMM-Manager for Windows is by far the most value-for-money
More informationCoil Handling and Press Feeding Equipment YESTERDAY S INTEGRITY. TOMORROW S TECHNOLOGY.
Coil Handling and Press Feeding Equipment YESTERDAY S INTEGRITY. TOMORROW S TECHNOLOGY. CORPORATE OVERVIEW Founded in 1966, CHS Automation has become the industry leader in coil handling equipment. Technology
More informationTopics Introduction to Microprocessors
Topics 2244 Introduction to Microprocessors Chapter 8253 Programmable Interval Timer/Counter Suree Pumrin,, Ph.D. Interfacing with 886/888 Programming Mode 2244 Introduction to Microprocessors 2 8253/54
More informationRHE11. Hazardous Area Multifunction Coriolis Flow Transmitter. Features. Applications. Benefits
RHE11 Hazardous Area Multifunction Coriolis Flow Transmitter Features Wall or Pipe Bracket Mount Built in safety barriers allow operation with RHM sensor in hazardous area Selectable Metric and English
More informationHytera. PD41X Patrol Management System. Installation and Configuration Guide
Hytera PD41X Patrol Management System Installation and Configuration Guide Documentation Version: 01 Release Date: 03-2015 Copyright Information Hytera is the trademark or registered trademark of Hytera
More informationDRTS 66 The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters
The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters Testing all relay technologies: electromechanical, solid state, numerical and IEC61850 Manual
More informationORCA-50 Handheld Data Terminal UHF Demo Manual V1.0
ORCA-50 UHF Demo Manual V1.0 ORCA-50 Handheld Data Terminal UHF Demo Manual V1.0 Eximia Srl. www.eximia.it - www.rfidstore.it mario.difloriano@eximia.it 1 Eximia Srl www.eximia.it - www.rfidstore.it Catelogue
More informationC4000. inline control. Photometric Converter. Real-time photometric converter. Factory zero for scattered light sensors
C4000 Photometric Converter inline control Real-time photometric converter Factory zero for scattered light sensors Simultaneous operation of up to four inline sensors Process control functions via Remote
More informationEmbedded & Robotics Training
Embedded & Robotics Training WebTek Labs creates and delivers high-impact solutions, enabling our clients to achieve their business goals and enhance their competitiveness. With over 13+ years of experience,
More informationRevision 1. March 21, ADC Operation Manual N 11 th St San Jose CA
Revision 1 March 21, 2017 ADC Operation Manual www.mountztorque.com - 1080 N 11 th St San Jose CA 95112 408.292.2214 1 Index 1. Installation 3 1.1 Required PC specification 3 1.2 Software 3 2. Operation
More informationKurz Instruments Inc. 19 August 2010
BUILT-IN ZERO-MIDSPAN-SPAN DRIFT CHECK/CALIBRATOR Introduction Continuous Emissions Monitoring Systems (CEMS) have a long term stability verification requirement. Most of the equipment is verified using
More informationTechnical Specification
LARGEST RANGE OF IMPULSE TESTERS UP TO 100KV/100KA Technical Specification No. E-MIG0603IN2.doc revised: 20.October 2004 1 MIG Tester Type MIG0603IN2 1 MIG Tester Type MIG0603IN2 1 1.1 Introduction 1 2
More informationWeld Checkers. Resistance welding derives it s ability to form a proper weld nugget from the simple formula
Lower scrap rate Improved process control ISO 9000 data collection Decreased machine downtime Accurate machine set up Weld optimization and Design of Experiments (DoE) Welding process diagnostics Weld
More informationCHAPTER 8 SUMMARY OF PARAMETER SETTINGS
CHAPTER 8 SUMMARY OF PARAMETER SETTINGS VFD-S Series!: The parameter can be set during operation, *: Twice the value for 460V class. Group 0 User Parameters Parameters Explanation s 0-00 Identity Code
More informationOptimum control of the grinding process thanks to reliable in-process measurement. SHARING EXCELLENCE
Movoline In-Process Metrology Optimum control of the grinding process thanks to reliable in-process measurement. SHARING EXCELLENCE Industrial Metrology Your partner for measuring solutions We deliver
More informationCashConcepts CCE 4000
CashConcepts CCE 4000 Coin Counter and Sorting Machine User Manual Introduction Thank you for choosing the CCE 4000. This coin counting and coin sorting machine is designed to simplify the daily cash or
More informationInstruction manual. art Installation manual
Instruction manual art. 01521 Installation manual Contents GENERAL FEATURES AND FUNCTIONALITY from page 4 ETS PARAMETERS AND COMMUNICATION OBJECTS from page 6 COMMUNICATION OBJECTS GENERAL FEATURES AND
More informationCOIN COUNTER & SORTER
MANUAL SAFESCAN 12 COIN COUNTER & SORTER www.safescan.com 1 INTRODUCTION Thank you for purchasing the Safescan 12 Coin Counter and Sorter, a product of outstanding ease-of-use and quality. The Safescan
More informationFOUNDATION Fieldbus: the Diagnostics Difference Fieldbus Foundation
FOUNDATION Fieldbus: the Diagnostics Difference There s Diagnostics and There s Diagnostics. The Value of Fieldbus Diagnostics Physical Layer Diagnostics Managing the Diagnostics Storm PAM and IDM Software,
More informationQC YK7340. Horizontal CNC Form Gear Grinding Machine
1 QC YK7340 Horizontal CNC Form Gear Grinding Machine The Model #YK7340A CNC Profile (Form) Wheel Gear Grinding Machine is used for grinding precise, special cylindrical gears with an outside diameter
More informationJust how smart is your home?
Just how smart is your home? A look at the features and benefits of LightwaveRF technology to control lighting, heating and security in your home. John Shermer Technology Choices Technology Choices Zigbee
More informationPositioner with HART Communication Type 3780
Positioner with HART Communication Type 780 Application Single-acting or double-acting positioner for attachment to pneumatic control valves. Supplied with an electric input signal from to 20 ma Travels
More information2006 MFJ ENTERPRISES, INC.
Model MFJ-4416B INSTRUCTION MANUAL CAUTION: Read All Instructions Before Operating Equipment MFJ ENTERPRISES, INC. 300 Industrial Park Road Starkville, MS 39759 USA Tel: 662-323-5869 Fax: 662-323-6551
More informationP/N: AX TECHNICAL DATASHEET #TDAX Single Input, Dual Output Valve Controller 1 Universal Input, +5V reference CAN (SAE J1939)
TECHNICAL DATASHEET #TDAX022000 Single Input, Dual Output Valve Controller 1 Universal Input, +5V reference (SAE J1939) Features: 1 universal signal input 2 proportional or on/off outputs up to 3 A User
More informationTC LV-Series Temperature Controllers V1.01
TC LV-Series Temperature Controllers V1.01 Electron Dynamics Ltd, Kingsbury House, Kingsbury Road, Bevois Valley, Southampton, SO14 OJT Tel: +44 (0) 2380 480 800 Fax: +44 (0) 2380 480 801 e-mail support@electrondynamics.co.uk
More informationIML PowerDrill. Uncompromising Precision for Any Application
IML PowerDrill Uncompromising Precision for Any Application IML-RESI PD Series Electronic drill for demanding applications with custom add-ons Applications Advantages The IML PowerDrill can be used wherever
More informationPLEASE NOTE: LAI GAMES V 1.3
V 1.3 PLEASE NOTE: Read this manual BEFORE operating the machine. Keep this manual for your reference. Go to www.laigames.com click on Operator Access to register your games and receive of future updates.
More informationSection 1. Introduction
Section 1 Introduction Note: A variety of game software is compatible with the gaming machine. In addition, gaming machines support many optional components, such as player panel switches, that may affect
More informationPolitecnico di Milano Advanced Network Technologies Laboratory. Radio Frequency Identification
Politecnico di Milano Advanced Network Technologies Laboratory Radio Frequency Identification RFID in Nutshell o To Enhance the concept of bar-codes for faster identification of assets (goods, people,
More information4 th -Generation Stealth All-Band Electrically Reversible Directional Array. Jeff Blaine ACØC Presented to the KC DX Club 26 July 2010
4 th -Generation Stealth All-Band Electrically Reversible Directional Array Jeff Blaine ACØC Presented to the KC DX Club 26 July 2010 Array Overview Array Views Array Features All band coverage 160m 6m
More informationLIGHT-SCENE ENGINE MANAGER GUIDE
ambx LIGHT-SCENE ENGINE MANAGER GUIDE 20/05/2014 15:31 1 ambx Light-Scene Engine Manager The ambx Light-Scene Engine Manager is the installation and configuration software tool for use with ambx Light-Scene
More informationGEA Omni TM control panel. The intuitive touch for refrigeration and gas compression control technology. Evaporator. Compressor. OmniView.
Compressor Evaporator OmniView Condenser Sequencer Energy Saver GEA Omni TM control panel The intuitive touch for refrigeration and gas compression control technology engineering for a better world GEA
More informationHitachi P1 Closed Loop Hoist Basic Instruc on Manual
Hitachi P1 Closed Loop Hoist Basic Instruc on Manual DH Firmware V.18 DETROIT HOIST AND CRANE LLC, CO. 6650 STERLING DRIVE NORTH STERLING HEIGHTS MICHIGAN 48312 Introduction This manual only applies to
More informationJet Central Sequencer Plus
Jet Central Sequencer Plus Features The Jet Central Sequencer Plus is a multipurpose electronic device, the capabilities of the unit include: Three part sequencer, operating landing gear and two independent
More informationVariable Frequency Drives Basic Operating Principles and Core Maintenance Considerations
Variable Frequency Drives Basic Operating Principles and Core Maintenance Considerations By: Tom Reilly Account Manager, W&WW Industry - NC / SC / VA Rockwell Automation / Allen-Bradley 704-287-1178 (mobile)
More informationHello, and welcome to this presentation of the FlexTimer or FTM module for Kinetis K series MCUs. In this session, you ll learn about the FTM, its
Hello, and welcome to this presentation of the FlexTimer or FTM module for Kinetis K series MCUs. In this session, you ll learn about the FTM, its main features and the application benefits of leveraging
More informationGENERAL MACHINE FEATURES
BERNINA 580 Sewing Stitch Package 227 Stitches 29 Practical, 8 Buttonholes, 2 Eyelets, 172 Decorative, 14 Quilting; 7 Alphabets + 2 Darning Programs Sewing view is shown. Embroidery module is also included.
More informationPortable Welding Inverters
Portable Welding Inverters Introduction CIGWELD Professional: When welding is your business At CIGWELD we distinguish ourselves from our competition through superior featured, dependable products, technical
More informationShelti, Inc. 333 Morton Street Bay City, MI Phone Fax. Bayside Dollar Bill Acceptor Pool Table Manual & Instructions
Shelti, Inc. 333 Morton Street Bay City, MI 48706 989-893-1739 Phone 989-893-1809 Fax Bayside Dollar Bill Acceptor Pool Table Manual & Instructions Contents Section-1 Introduction Bayside DBA Pool Table
More informationMicroprocessor Gas and Steam Flow Computer Energy Flow Computer (Consumption and Enthalpy for Steam) Series: DigiFlow Type: 515
Microprocessor Gas and Steam Flow Computer Energy Flow Computer (Consumption and Enthalpy for Steam) Series: DigiFlow Type: 515 Technical Information 03/2012 FLOW THE EXPERT IN LEVEL AND FLOW DigiFlow
More informationInverter Drive /Vector Drive Motors & Controls
H2 Inverter/ Encoderless Vector Inverter Drive /Vector Drive & Controls 3/4 thru 50 180-264 VAC 3 Phase - 50/60 Hz 3/4 thru 60 340-528 VAC 3 Phase - 50/60 Hz 3/4 thru 60 515-660 VAC 3 Phase - 60 Hz HVAC
More informationVMS-4000 Digital Seismograph System - Reference Manual
VMS-4000 Digital Seismograph System - Reference Manual This equipment should be installed, maintained and operated by technically qualified personnel. Any errors or omissions in data or it s interpretations,
More informationRelay Driver Overview and Applications
Relay Driver Overview and Applications Describes Basic and Advanced Settings for common and alternative/novel uses for the Relay driver (RD-1). Morningstar s Relay Driver (RD-1) is a fully programmable
More informationTrunking Information Control Console
Trunking Information Control Console One Touch Communication and Control In a TICC we can: Initiate a call in one touch Send a status in one touch Call a group of users in one touch See what type of call
More informationADJUSTABLE SPEED DRIVES. W7 Series. 18 Pulse
ADJUSTABLE SPEED DRIVES W7 Series 18 Pulse Meets or Exceeds Your Specifications Standard Specifications Item Voltage Class 460V Maximum HP 60 75 100 125 150 200 250 300 400 500 600 700 800 Drive Rating
More informationGeosteering Resistivity Tool
L o g g i n g t o o l s f o r o i l e x p l o r a t i o n Geosteering Resistivity Tool 4-3/4 inch 6-1/2 inch Page 1 of 6 Enhanced Resistivity Measurement Most MWD Resistivity tools are of the Wave Propagation
More informationPower IT LV Active Filters PQFI PQFM PQFK. The ABB comprehensive solution for active filtering of harmonics
Power IT LV Active Filters PQFI PQFM PQFK The ABB comprehensive solution for active filtering of harmonics Harmonics and Power Quality Power Quality relates to the amplitude, frequency and distortion of
More information1. Institute of Electrical and Electronic Engineers (IEEE) a. Standard , IEEE Guide for Harmonic Content and Control.
Section 16680 VARIABLE SPEED DRIVE SYSTEMS OR AFD Part I - GENERAL I.01 Description A. This specification is to cover a complete adjustable frequency motor drive consisting of a pulse width modulated (PWM)
More informationDRG-Series. Digital Radio Gateway. Tait P25 CCDI Tier-2 (TM9400 Series Mobile Radio) Digital Radio Supplement
DRG-Series Digital Radio Gateway Tait P25 CCDI Tier-2 (TM9400 Series Mobile Radio) Digital Radio Supplement DRG-Series Digital Radio Gateway Tait P25 CCDI Tier-2 (TM9400 Series Mobile Radio) Digital Radio
More informationEasy-To-Use Graphic Interface
Graphical Robot Programming Teachbox for Robot W 711 The Wittmann CNC 6.2 robot control with color graphics screens allows simpler robot teaching and use than ever before. The operator simply traces out
More informationSCHEDULE WORKSHEET SCHEDULE #
SCHEDULE WORKSHEET SCHEDULE # SQUEEZE DELAY TIME Cycles SQUEEZE TIME Cycles VALVE MODE Q No Valve Q V1 Q V2 Q V1+V2 Q V3 Q V1+V3 Q V2+V3 Q V1+V2+V3 SQUEEZE PRESSURE/FORCE (PV) PSI / Lb / ma PRESSURE/FORCE
More informationThe central computer system shall compile and record, among other things, the following information: 1. Amount deposited in the coin drop area and bil
TECHNICAL STANDARDS FOR ELECTRONIC GAMING EQUIPMENT ELECTRONIC GAMES OF CHANCE A. DEFINITIONS For the purposes of this section: "Credit" means the smallest unit of value that may be used to play a game
More informationSustainable Manufacturing
About DesignForm DesignForm has compiled 30 years of knowledge and experience, which has been instrumental in shaping the design and construction of our furniture and products. Combining traditional hand-craftsmanship
More information