Technical Specification FLUXUS ADM 7x07

Transcription

1 Tecnica Specification FLUXUS ADM 7x07 Stationary Utrasonic Fow Measurement of Liquids Features Transducers non-invasive (no contact wit te medium, no need for expensive materias) wearfree no pressure drop (no operationa costs) ow instaation costs exposion proof transducers (FM or ATEX) avaiae not sensitive to dust or umidity advantageous price for arge pipe diameters and ig pressure stages Fowmeter stationary instaation: - FLUXUS ADM 7407: for wa mounting - FLUXUS ADM 7907: for 19 " rack mounting simpe operation due to ceary structured user diaog Measurement stae and reiae measuring resuts even under difficut conditions precise i-directiona fow measurement wit ig measurement dynamics ong-term stae measurement resuts ig measurement rate, fast response time FLUXUS ADM 7407 FLUXUS ADM 7907 TSFLUXUS_F7V1-0EN

2 FLUXUS ADM 7x07 Tecnica Specification Measuring Principe For te fow measurement of te medium, utrasonic signas are used, empoying te transit time metod. Utrasonic signas are emitted y a transducer instaed on one side of a pipe, refected on te opposite side and received y a second transducer. Tese signas are emitted aternativey in fow direction and against it. As te medium in wic te signas propagate is fowing, te transit time of te utrasonic signas in fow direction is sorter tan against te fow direction. Te transit time difference Δt is measured and aows to determine te average fow veocity on te propagation pat of te utrasonic signas. A fow profie correction is ten performed in order to otain te area average of te fow veocity, wic is proportiona to te voume fow. Te received utrasonic signas wi e cecked for teir usefuness for te measurement and te pausiiity of te measured vaues wi e evauated. Te compete measuring cyce is controed y te integrated microprocessors. Disturance signas wi e eiminated. J J J Pat of te utrasonic signa Transit time difference Δt Cacuation of te Fow Veocity v = k. α Δt/(2. t t ) wit: v - fow veocity k α - fowmeter constant Δt - transit time difference t t - transit time of te medium TSFLUXUS_F7V1-0EN

3 Tecnica Specification FLUXUS ADM 7x07 Numer of Sound Pats Te numer of sound pats is te numer of transits of te utrasonic signas troug te medium in te pipe. refection mode: numer of sound pats = even, te transducers are mounted on te same side of te pipe, correct positioning of te transducers easier diagona mode: numer of sound pats = odd, te transducers are mounted on opposite sides of te pipe Te mode to e used depends on te appication. If te numer of sound pats is increased, te accuracy of te measurement wi e etter, ut te signa attenuation is increased. In case of a ig signa attenuation y medium, pipe and coatings, diagona mode wit 1 sound pat wi e used.. a > 0 a < 0 Diagona mode, 1 sound pat a Diagona mode, 1 sound pat, negative transducer distance Diagona mode, 3 sound pats a a - transducer distance Refex mode, 2 sound pats TSFLUXUS_F7V1-0EN

4 FLUXUS ADM 7x07 Tecnica Specification Fowmeter Tecnica Data FLUXUS ADM 7407 ADM 7407 A2 ADM 7907 design standard fied device fied device for ATEX zone 2 19 " modue measurement measuring principe transit time difference correation principe fow veocity m/s repeataiity 0.15 % of reading ±0.01 m/s accuracy 1 wit standard cairation ±1.6 % of reading ±0.01 m/s wit extended cairation (option) ±1.2 % of reading ±0.01 m/s wit fied cairation 2 ±0.5 % of reading ±0.01 m/s medium a acousticay conductive iquids wit < 10 % gaseous or soid content in voume fowmeter power suppy V/ Hz or V DC power consumption < 15 W fow cannes 1, option: 2 signa damping s, adjustae measuring cyce (1 canne) Hz response time 1 s (1 canne), option: 70 ms materia auminum, powder coated auminum degree of protection IP 65 IP 20 according to EN dimensions see dimensiona drawing 42TE x 3HE (witout ack pane) see dimensiona drawing weigt 2.8 kg 1.7 kg instaation wa mounting, option: 2 " pipe mounting 19 " rack mounting operating temperature C dispay 2 x 16 caracters, dot matrix, ackit menu anguage Engis, German, Frenc, Dutc, Spanis exposion protection ATEX zone marking - II 3G - Ex na II T4 T a C II 3D Ex td A22 IP66 T100 C measuring functions pysica quantities voume fow, mass fow, fow veocity, eat fow (if temperature inputs are instaed) totaizers voume, mass, option: eat cacuation functions average, difference, sum data ogger oggae vaues a pysica quantities and totaized vaues acity > measured vaues 1 under reference conditions and wit v > 0.15 m/s 2 reference uncertainty < 0.2 % TSFLUXUS_F7V1-0EN

5 Tecnica Specification FLUXUS ADM 7x07 FLUXUS ADM 7407 ADM 7407 A2 ADM 7907 communication interface - process connection: option: RS485 (Modus, emitter) - diagnosis: RS232 seria data kit (option) software (a Windows TM versions) - FuxData: downoad of measured data, grapica presentation, conversion to oter formats - FuxKoeff: creating medium data sets cae RS232 adapter RS232 to USB outputs (option) Te outputs are gavanicay isoated from te main device. numer on request current output range 0/ ma accuracy 0.1 % of reading ±15 μa active output R ext < 500 Ω passive output U ext < 24 V, R ext < 1 kω votage output range V or V accuracy V: 0.1 % of reading ±1 mv V: 0.1 % of reading ±10 mv interna resistance R i = 500 Ω frequency output range khz or khz open coector 24 V/4 ma inary output Reed reay 48 V/0.25 A 48 V/0.25 A open coector (OC) 24 V/4 ma 24 V/4 ma optoreay 32 V/100 ma - inary output as imit detector - function as state output imit, sign cange or error imit, sign cange or error inary output (OC) as puse output - vaue units units - widt ms ms inputs (option) Te inputs are gavanicay isoated from te main device. numer max. 4, on request temperature input designation Pt100/Pt1000 Pt100 design 4-wire 4-wire range C C resoution 0.01 K 0.1 K accuracy ±0.01 % of reading ±0.03 K ±0.1 % of reading ±0.2 K current input accuracy 0.1 % of reading ±10 μa range active : ma passive : ma active input U i = 24 V, R i = 50 Ω, P i < 0.5 W, not sort circuit proof passive input R i = 50 Ω, P i < 0.3 W votage input range V V or V accuracy 0.1 % of reading ±1 mv V: 0.1 % of reading ±1 mv V: 0.1 % of reading ±10 mv interna resistance R i = 1 MΩ R i = 1 MΩ TSFLUXUS_F7V1-0EN

6 FLUXUS ADM 7x07 Tecnica Specification Dimensions and Mounting Dimensions (in mm) FLUXUS ADM 7407 M20 (6x) Ø 4.5 screw oes for wa mounting FLUXUS ADM M TSFLUXUS_F7V1-0EN

7 Tecnica Specification FLUXUS ADM 7x07 2 " Pipe Mounting Kit (option) FLUXUS ADM 7407 TSFLUXUS_F7V1-0EN

8 FLUXUS ADM 7x07 Tecnica Specification Transducers Sear Wave Transducers (for ATEX zone 1) tecnica type CDG1N31 CDK1N31 CDM1N31 CDQ1N31 order code FSG-NA1TS FSK-NA1TS FSM-NA1TS FSQ-NA1TS transducer frequency MHz outer pipe diameter min. extended mm min. recommended mm max. recommended mm max. extended mm pipe wa tickness min. mm max. mm materia ousing PEEK wit stainess stee PEEK wit stainess stee stainess stee stainess stee contact surface PEEK PEEK PEEK PEEK degree of protection IP 65 IP 65 IP 65 IP 65 according to EN dimensions engt mm dept mm eigt mm dimensiona drawing operating temperature min. C max. C exposion protection ATEX zone marking 0044; II 2G 0044; II 2G 0044; II 2G 0044; II 2G Ex q II T6...T3 Ta C Ex q II T6...T3 Ta C EEx m II T6...T4 Ta C EEx m II T6...T4 Ta C II 2D Ex td A21 IP65 TX II 2D Ex td A21 IP65 TX certification IBExU04ATEX1011 X IBExU04ATEX1011 X IBExU98ATEX1012 X IBExU98ATEX1012 X type of protection powder fiing powder fiing ensuation ensuation FM marking type of protection TSFLUXUS_F7V1-0EN

9 Tecnica Specification FLUXUS ADM 7x07 Sear Wave Transducers (for ATEX zone 2, FM or witout Exposion Protection) tecnica type CDG1N52 CDK1N52 CDM1N52 order code FSG-NA2TS FSG-NF2TS FSG-NNNTS FSK-NA2TS FSK-NF2TS FSK-NNNTS FSM-NA2TS FSM-NF2TS FSM-NNNTS transducer frequency MHz outer pipe diameter min. extended mm min. recommended mm max. recommended mm max. extended mm pipe wa tickness min. mm max. mm materia ousing PEEK wit stainess stee PEEK wit stainess stee stainess stee contact surface PEEK PEEK PEEK degree of protection IP 67 IP 67 IP 67 according to EN dimensions engt mm dept mm eigt mm dimensiona drawing operating temperature min. C FSM-NA2TS: -20 FSM-NF2TS: -40 FSM-NNNTS: -40 max. C FSG-NA2TS: +130 FSG-NF2TS: +125 FSG-NNNTS: +130 exposion protection FSK-NA2TS: +130 FSK-NF2TS: +125 FSK-NNNTS: +130 FSM-NA2TS: +130 FSM-NF2TS: +125 FSM-NNNTS: +130 ATEX zone FSG-NA2TS: 2 FSK-NA2TS: 2 FSM-NA2TS: 2 marking II 3G Ex na II T6...T3 Ta C II 3D Ex td A22 IP67 TX II 3G Ex na II T6...T3 Ta C II 3D Ex td A22 IP67 TX II 3G Ex na II T6...T4 Ta C II 3D Ex td A22 IP67 TX certification type of protection non incendive, protection non incendive, protection non incendive, protection y encosure y encosure y encosure FM marking FSG-NF2TS: NI/C. I, II, III/Div. 2/ Gp A-G/T4 Ta = 125 C FSK-NA2TS: NI/C. I, II, III/Div. 2/ Gp A-G/T4 Ta = 125 C FSM-NA2TS: NI/C. I, II, III/Div. 2/ Gp A-G/T4 Ta = 125 C type of protection non incendive non incendive non incendive TSFLUXUS_F7V1-0EN

10 FLUXUS ADM 7x07 Tecnica Specification Sear Wave Transducers (for ATEX zone 2, FM or witout Exposion Protection) tecnica type CDQ1NZ7 CDS1NZ7 CDQ1N52 CDS1N52 order code FSQ-NNNAS FSS-NNNAS FSQ-NA2TS FSS-NNNTS FSQ-NF2TS FSQ-NNNTS transducer frequency MHz outer pipe diameter min. extended mm min. recommended mm max. recommended mm max. extended mm pipe wa tickness min. mm max. mm materia ousing stainess stee stainess stee stainess stee stainess stee contact surface PEEK PEI PEEK PEI degree of protection IP 65 IP 65 IP 67 IP 65 according to EN dimensions engt mm dept mm eigt mm dimensiona drawing operating temperature min. C FSQ-NA2TS: FSQ-NF2TS: -40 FSQ-NNNTS: -40 max. C FSQ-NA2TS: FSQ-NF2TS: +125 FSQ-NNNTS: +130 exposion protection ATEX zone - - FSQ-NA2TS: 2 - marking - - FSQ-NA2TS: - II3G Ex na II T6...T4 Ta C II3D Ex td A22 IP67 TX certification type of protection - - non incendive, protection - y encosure FM marking - - FSQ-NF2TS: - NI/C. I, II, III/Div. 2/ Gp A-G/T4 Ta = 125 C type of protection - - non incendive TSFLUXUS_F7V1-0EN

11 Tecnica Specification FLUXUS ADM 7x07 Sear Wave Transducers (witout Exposion Protection and wit Connection System AS) tecnica type CDG1NZ7 CDK1NZ7 CDM1NZ7 order code FSG-NNNAS FSK-NNNAS FSM-NNNAS transducer frequency MHz outer pipe diameter min. extended mm min. recommended mm max. recommended mm max. extended mm pipe wa tickness min. mm max. mm materia ousing PEEK wit stainess stee PEEK wit stainess stee stainess stee contact surface PEEK PEEK PEEK degree of protection according to EN IP 65 IP 65 IP 65 option: IP 68 dimensions engt mm dept mm eigt mm dimensiona drawing operating temperature min. C max. C exposion protection ATEX zone marking certification type of protection FM marking type of protection TSFLUXUS_F7V1-0EN

12 FLUXUS ADM 7x07 Tecnica Specification Sear Wave Transducers (Hig Temperature) tecnica type CDM1EZ7 CDQ1EZ7 CDM1E52 CDQ1E52 order code FSM-ENNAS FSQ-ENNAS FSM-ENNTS FSQ-ENNTS FSM-EF2TS FSQ-EF2TS transducer frequency MHz outer pipe diameter min. extended mm min. recommended mm max. recommended mm max. extended mm pipe wa tickness min. mm max. mm materia ousing stainess stee stainess stee stainess stee stainess stee contact surface Sintimid Sintimid Sintimid Sintimid degree of protection IP 65 IP 65 IP 65 IP 65 according to EN dimensions engt mm dept mm eigt mm dimensiona drawing operating temperature min. C max. C FSM-ENNTS: +200 FSM-EF2TS: +125 FSQ-ENNTS: +200 FSQ-EF2TS: +125 exposion protection ATEX zone marking certification type of protection FM marking - - FSM-EF2TS: NI/C. I, II, III/Div. 2/ Gp A-G/T4 Ta = 125 C FSQ-EF2TS: NI/C. I, II, III/Div. 2/ Gp A-G/T4 Ta = 125 C type of protection - - non incendive non incendive TSFLUXUS_F7V1-0EN

13 Tecnica Specification FLUXUS ADM 7x07 Lam Wave Transducers (for ATEX Zone 1) tecnica type CRG1N33 CRH1N33 CRK1N33 order code FLG-NA1TS FLH-NA1TS FLK-NA1TS transducer frequency MHz outer pipe diameter min. extended mm min. recommended mm max. recommended mm max. extended mm pipe wa tickness min. mm max. mm materia ousing PPSU wit stainess stee PPSU wit stainess stee PPSU wit stainess stee contact surface PPSU PPSU PPSU degree of protection IP 65 IP 65 IP 65 according to EN dimensions engt mm dept mm eigt mm dimensiona drawing operating temperature min. C max. C exposion protection ATEX zone marking 0044; II 2G 0044; II 2G 0044; II 2G Ex q II T6...T3 Ta C II 2D Ex td A21 IP65 TX Ex q II T6...T3 Ta C II 2D Ex td A21 IP65 TX Ex q II T6...T3 Ta C II 2D Ex td A21 IP65 TX certification IBExU04ATEX1011 X IBExU04ATEX1011 X IBExU04ATEX1011 X type of protection powder fiing powder fiing powder fiing FM marking type of protection TSFLUXUS_F7V1-0EN

14 FLUXUS ADM 7x07 Tecnica Specification Lam Wave Transducers (for ATEX Zone 2, FM or witout Exposion Protection) tecnica type CRG1N52 CRH1N52 CRK1N52 order code FLG-NA2TS FLG-NF2TS FLG-NNNTS FLH-NA2TS FLH-NF2TS FLH-NNNTS FLK-NA2TS FLK-NF2TS FLK-NNNTS transducer frequency MHz outer pipe diameter min. extended mm min. recommended mm max. recommended mm max. extended mm pipe wa tickness min. mm max. mm materia ousing PPSU wit stainess stee PPSU wit stainess stee contact surface PPSU PPSU PPSU degree of protection IP 67 IP 67 IP 67 according to EN dimensions engt mm dept mm eigt mm dimensiona drawing PPSU wit stainess stee operating temperature min. C max. C FLG-NA2TS: +150 FLG-NF2TS: +125 FLG-NNNTS: +170 FLH-NA2TS: +150 FLH-NF2TS: +125 FLH-NNNTS: +170 FLK-NA2TS: +150 FLK-NF2TS: +125 FLK-NNNTS: +170 exposion protection ATEX zone FLG-NA2TS: 2 FLH-NA2TS: 2 FLK-NA2TS: 2 marking FLG-NA2TS: II 3G Ex na II T6...T3 Ta C II 3D Ex td A22 IP67 TX FLH-NA2TS: II 3G Ex na II T6...T3 Ta C II 3D Ex td A22 IP67 TX FLK-NA2TS: II 3G Ex na II T6...T3 Ta C II 3D Ex td A22 IP67 TX certification type of protection non incendive, protection non incendive, protection non incendive, protection y encosure y encosure y encosure FM marking FLG-NF2TS: NI/C. I, II, III/Div. 2/ Gp A-G/T4 Ta = 125 C FLH-NF2TS: NI/C. I, II, III/Div. 2/ Gp A-G/T4 Ta = 125 C FLK-NF2TS: NI/C. I, II, III/Div. 2/ Gp A-G/T4 Ta = 125 C type of protection non incendive non incendive non incendive TSFLUXUS_F7V1-0EN

15 Tecnica Specification FLUXUS ADM 7x07 Lam Wave Transducers (witout Exposion Protection) tecnica type CRG1NC3 CRH1NC3 CRK1NC3 order code FLG-NNNAS FLH-NNNAS FLK-NNNAS transducer frequency MHz outer pipe diameter min. extended mm min. recommended mm max. recommended mm max. extended mm pipe wa tickness min. mm max. mm materia ousing PPSU wit stainess stee PPSU wit stainess stee PPSU wit stainess stee contact surface PPSU PPSU PPSU degree of protection IP 65 IP 65 IP 65 according to EN dimensions engt mm dept mm eigt mm dimensiona drawing operating temperature min. C max. C exposion protection ATEX zone marking certification type of protection FM marking type of protection TSFLUXUS_F7V1-0EN

16 FLUXUS ADM 7x07 Tecnica Specification Order Code Key for Transducers transducer mode FL FS frequency G H K M Q S - temperature N E exposion protection A1 A2 F2 NN connection system AS TS - extension cae description set of utrasonic fow transducers for iquids measurement, Lam wave set of utrasonic fow transducers for iquids measurement, sear wave 0.2 MHz 0.3 MHz (Lam wave ony) 0.5 MHz 1 MHz (sear wave ony) 4 MHz (sear wave ony) 8 MHz (sear wave ony) norma temperature range extended temperature range (sear wave transducers wit transducer frequency M, Q) ATEX zone 1 (wit connection system TS) ATEX zone 2 (wit connection system TS) FM Cass I Div. 2 (ADM 7407 wit connection system TS) not exposion proof wit Ampeno connector direct connection or connection via junction ox XXX cae engt in m, for max. engt of extension cae see page 18 connection system TS: 0 m: witout junction ox > 0 m: wit junction ox JB01 (ATEX zone 1) or JB02 (ATEX zone 2, FM, not exposion proof) exampe FS G - N A1 TS sear wave transducer 0.2 MHz, norma temperature range, for ATEX zone 1, connection system TS wit junction ox JB01 and 30 m extension cae TSFLUXUS_F7V1-0EN

17 Tecnica Specification FLUXUS ADM 7x07 Transducer Pipe Mounting Fixtures Tension Straps and Casps Tension Straps, Casps and Mounting Soes Variofix Mounting Fixture VFX wit Tension Straps and Casps TSFLUXUS_F7V1-0EN

18 FLUXUS ADM 7x07 Tecnica Specification Connection Systems Connection System AS (not exposion proof transducers) transducer frequency G, H, K M, P Q S x y x y x y x y cae engt m FLUXUS x y Connection System TS transducer frequency G, H, K M, P Q S x x x x cae engt m connection via junction ox direct connection ATEX zone 2, FM and not exposion proof transducers JB02 x X x FLUXUS X L FLUXUS ATEX zone 1 JB01 x X FLUXUS L FLUXUS x X x, y - transducer cae engt - max. engt of extension cae TSFLUXUS_F7V1-0EN

19 Tecnica Specification FLUXUS ADM 7x07 Junction Box Tecnica Data tecnica type JB01S4E3M JB02 dimensions see dimensiona drawing see dimensiona drawing instaation wa mounting wa mounting option: 2 " pipe mounting option: 2 " pipe mounting materia ousing stainess stee 316L (1.4404) stainess stee 304 (1.4301) gasket siicone siicone degree of protection IP 67 IP 67 according to EN operating temperature min. C max. C exposion protection ATEX zone 1 2 marking 0044 II2G Ex e m II T6...T4 T a C II3G Ex na II T6...T4 T a C certification IBExU06ATEX type of protection junction ox: increased safety non incendive decouped network: ensuation Dimensions wa mounting oder Ø 9 2 " Pipe Mounting Kit (option) TSFLUXUS_F7V1-0EN

20 FLUXUS ADM 7x07 Tecnica Specification FLEXIM GmH Wofener Str Berin Germany Te.: +49 (30) Fax: +49 (30) internet: e-mai: Suject to cange witout notification. Errors excepted. FLUXUS is a registered trademark of FLEXIM GmH TSFLUXUS_F7V1-0EN