Precision Adjustable Shunt Regulator MM1431 Series
|
|
|
- Brice Dorsey
- 5 years ago
- Views:
Transcription
1 Precision Adjustable Shunt Regulator MM4 Series Precision Adjustable Shunt Regulator MM4 Series Outline This IC is -termial adjustable shunt regulator, which provides a highly accurate.8% bandgap reference voltage. The output voltage can be adjusted to any value between reference voltage VREF and 5V with two external resistors. Moreover, there are a lot of ranges of the application as a zener diode besides the replacement is possible because it has steep turn-on characteristics. Features (Unless otherwise specified, Topr=+5 C) () Reference voltage tolerance VREF=.495V±.8% () Output voltage can be adjusted VREF Vo 5V () Low Dynamic Output Impedance ZKA. typ. (4) Specifications Operating Temperature ~+85ºC Cathode to voltage VKA VREF~5 V Cathode current IK.6~5 ma Reference voltage VREF.495V±.8% Reference voltage deviation over temperature range ±mv (VKA=VREF, IK=mA Ta= ~+85ºC) Minimum Cathode Current IKmin..6mA max. Off-state Cathode Current IOFF..µA typ. Pin Assignment TO-9A SOT-5A * SC-8ABB 5 Reference 4 Reference Cathode 4 Reference Cathode N.C. SUB Cathode N.C. * note : The second terminal is SUB, so connect the terminal to GND. Product list Packages Parts no. Reference voltage Cathode current Dynamic impedance TO-9A (BULK) MM4AT.495V±.8%.6~5 ma.ω typ. /.5Ω Max TO-9A (TAPING) MM4ATT.495V±.8%.6~5 ma.ω typ. /.5Ω Max SOT-5A MM4ANRE.495V±.8%.6~5 ma.ω typ. /.5Ω Max SC-8ABB MM4CURE.495V±.8%.6~5 ma.ω typ. /.8Ω Max SC-8ABB MM4DURE.495V±.4%.6~5 ma.ω typ. /.8Ω Max
2 Precision Adjustable Shunt Regulator MM4 Series Equivalent Circuit Diagram Absolute Maximum Ratings (Ambient Temperature, Ta=5 C) Item Symbol Ratings Unit Operating Temperature TOPR -~+85 C Storage Temperature TSTG -4~+5 C Cathode to voltage VKA 5 V Cathode current IK -~ ma Reference input current IREF -.5~ ma Allowable loss Pd 55 (TO-9) 5 (SOT-5A) mw Recommended Operating Conditions (Ambient Temperature, Ta=5 C) Cathode to voltage VKA VREF~5 V Cathode current IK.6~5 ma
3 Precision Adjustable Shunt Regulator MM4 Series Electrical Characteristics (Ambient Temperature, Ta=5 C) Item Symbol Measurement conditions Min. Typ. Max. Unit Reference voltage VREF VKA=VREF, IK=mA V Reference voltage deviation over temperature range VREF/ Ta VKA=VREF, IK=mA Ta=-~+85 C ± mv Lord regulation VREF VKA=VREF~V IK=mA mv/v / VKA VKA=V~5V IK=mA - - mv/v Reference input current IREF IK=mA R=K, R= 4 µa Reference input current deviation over temperature range IREF/ Ta IK=mA R=K, R= Ta=-~+85 C ±.5 µa Minimum Cathode Current IKmin. VKA=VREF..6 ma Off-state Cathode Current IOFF VKA=5V, VREF=V.. µa Dynamic Impedance ZKA VKA=VREF, f < = khz IK=~5mA..5 Ω Measuring Circuit () VKA=VREF () IOFF () VKA > = VREF Vo=VKA=VREF (4) Open Loop Voltage Gain
4 Precision Adjustable Shunt Regulator MM4 Series Characteristics High Voltage Operating Characteristics Reference Input Current Reference Input Current IRef (µa) Low Current Operating Characteristics Reference Voltage Voltage Changed Portion VRef (mv) Reference Voltage Off State Leakage Reference Voltage VRef (V) Off-state Cathode Current IOFF (ma)
5 Precision Adjustable Shunt Regulator MM4 Series Dynamic Output Impedance Open loop Voltage Gain VKA=5V 6 Dynamic Impedance (ZKA) (Ω).. k k k Frequency f (Hz) M Open Loop Voltage Gain AV (db) 4 - k k k M Frequency f (Hz) M Pulse Response Stability Boundary Conditions Input And Output Voltage VIN VOUT (V) Input Voltage Output Voltage 4 5 Time t (µs) 6 a a b b c c d.. Load Capacitance CL (µf) a: VKA=VREF b: VKA=5V C: VKA=V d: VKA=5V Cathode voltage temperature Ta=5 C IKA=mA CL=: Ceramic capacitor Notes concerning stability operation region The MM4AT/AN requires external capasitors for regulator stability. These capacitors must be correctly selected for good performance.
TL431/TL431A. Programmable Shunt Regulator. Description. Features
Programmable Shunt Regulator Features Programmable output voltage to 36 volts Low dynamic output impedance 0.20 typical Sink current capability of 1.0 to 100mA Equivalent full-range temperature coefficient
KA431/KA431A/KA431L. Programmable Shunt Regulator. Features. Description. Internal Block Diagram.
www.fairchildsemi.com KA431/KA431A/KA431L Programmable Shunt Regulator Features Programmable output voltage to 36 volts Low dynamic output impedance 0.20 typical Sink current capability of 1.0 to 100mA
LM431SA/LM431SB/LM431SC
Programmable Shunt Regulator www.fairchildsemi.com Features Programmable Output Voltage to 36 Volts Low Dynamic Output Impedance.2 Typical Sink Current Capability of 1. to 1mA Equivalent FullRange Temperature
ADJUSTABLE PRECISION SHUNT REGULATOR NJM431SU NJM431SF NJM432SU NJM432SF 1.CATHODE 1.N.C. 2.ANODE 2.ANODE 3.CATHODE 2.ANODE 3.
ADJUSTABLE PRECISION SHUNT REGULATOR GENERAL DESCRIPTION The NJM431S/NJM432S are adjustable precision shunt regulators. The output voltage may be set to any value between VREF (about 2.5V) and 36V by two
Adjustable Precision Shunt Voltage Regulator LA431A LA431B. Adjustable Precision Shunt Regulator. General Description.
Adjustable Precision Shunt Voltage Regulator Adjustable Precision Shunt Regulator General Description LA431A and LA431B are three terminal Adjustable PrecisionShunt Regulators, With guaranteed thermal
TS432 Adjustable Precision Shunt Regulator
TO-92 Pin Definition: SOT-23 Pin Definition: SOT-25 1. Reference 1. Reference 2. Anode 2. Cathode 3. Cathode 3. Anode General Description TS432 series is a three-terminal adjustable shunt regulator with
NJM2823. Precision Micropower Shunt Voltage Reference
Precision Micropower Shunt Voltage Reference GENERAL DESCRIPTION NJM2823 is a precision and low quiescent current shunt voltage reference. Reference voltage form bandgap circuit has guaranteed the high
UTC UNISONIC TECHNOLOGIES CO., LTD. 1 LINEAR INTEGRATED CIRCUIT PROGRAMMABLE PRECISION REFERENCE
PROGRAMMABLE PRECISION DESCRIPTION The is a three-terminal adjustable regulator with a guaranteed thermal stability over applicable temperature ranges. The output voltage may be set to any value between
NJM2373A/76 ADJUSTABLE HIGH PRECISION SHUNT REGULATOR
ADJUSTABLE HIGH PRECISION SHUNT REGULATOR GENERAL DESCRIPTION NJM373 / NJM373A / NJM376 is an adjustable high precision shunt regulator. The output voltage can be adjusted to any value between reference
1.24V Low-Voltage Adjustable Precision Shunt Regulator
GENERAL DESCRIPTION The L432 is a three-terminal adjustable shunt regulator utilizing an accurate.24v band gap reference. The output voltage can be set to any value between.24v (V REF ) to 8V with two
Shenzhen Tuofeng Semiconductor Technology Co., Ltd
TF PROGRAMMABLE PRECISION REFERENCES The is three-terminal adjustable shunt regulator with specified termal stability. The output voltage may be set to any value between (Approx. 2.5V) and 36V with two
TL1431 PRECISION PROGRAMMABLE REFERENCE
PRECISION PROGRAMMABLE REFEREE 0.4% Initial Voltage Tolerance 0.2-Ω Typical Output Impedance Fast Turnon... 500 ns Sink Current Capability...1 ma to 100 ma Low Reference Current (REF) Adjustable Output
TL431 PROGRAMMABLE PRECISION REFERENCES FEATURES FUNCTION BLOCK DIAGRAM.
PROGRAMMABLE PRECISION REFERENCES The TL43 is three-terminal adjustable shunt regulator with specified termal stability. The output voltage may be set to any value between V REF (Approx. 2.5V) and 36V
TS2431. Programmable shunt voltage reference. Features. Applications. Description
Programmable shunt voltage reference Datasheet production data Features Adjustable output voltage:.5 to 4 V Precision selection at 5 C: ± %, ± 1% and ±.5% Sink current capability: 1 to 1 ma Industrial
ZR431 V Z. V ref. G nd ADJUSTABLE PRECISION ZENER SHUNT REGULATOR ISSUE 5 DECEMBER 2002 DEVICE DESCRIPTION FEATURES APPLICATIONS SCHEMATIC DIAGRAM
ADJUSTABLE PRECISION ZENER SHUNT REGULATOR ISSUE 5 DECEMBER 22 DEVICE DESCRIPTION The ZR431 is a three terminal adjustable shunt regulator offering excellent temperature stability and output current handling
TL431, TL431A ADJUSTABLE PRECISION SHUNT REGULATORS
Equivalent Full-Range Temperature Coefficient... 0 ppm/ C 0.-Ω Typical Output Impedance Sink-Current Capability...1 ma to 100 ma Low Output Noise Adjustable Output Voltage...V ref to 6 V Available in a
IP102. Dual OPAmp-Dual Comparator and Adj. Shunt Regulator DESCRIPTION FEATURES ORDERING INFORMATION BLOCK DIAGRAM
DESCRIPTION The IP102/A is a monolithic IC that includes two operational amplifiers, two comparators and an adjustable shunt regulator. This device is offering space and cost saving in many applications
AT431 Adjustable Precision Shunt Regulators
FEATURES DESCRIPTION Programmable Output Voltage to 40V Voltage Reference Tolerance 1.0% for B Series and 0.5% for A Series Low Dynamic Output Impedance 0.22Ω Sink Current Capability of 0.1mA to 100mA
TL431, TL431A ADJUSTABLE PRECISION SHUNT REGULATORS
Equivalent Full-Range Temperature Coefficient... 30 ppm/ C 0.2-Ω Typical Output Impedance Sink-Current Capability...1 ma to 100 ma Low Output Noise Adjustable Output Voltage...V ref to 36 V Available in
TS1431 Adjustable Precision Shunt Regulator
SOT-23 Pin Definition: 1. Cathode 2. Reference 3. Anode General Description TS1431 series integrated circuits are three-terminal programmable shunt regulator diodes. These monolithic IC voltage references
TS2431. Adjustable shunt voltage reference. Applications. Description. Features
Adjustable shunt voltage reference Datasheet - production data Industrial temperature range: - 40 to + 105 C Performance compatible with industrystandard TL431 Applications Computers Instrumentation Battery
TS432I Adjustable Precision Shunt Regulator
SOT-23 Pin Definition: 1. Reference 2. Cathode 3. Anode General Description The TS432AI/TS432BI is a three-terminal adjustable shunt regulator with specified thermal stability. The output voltage may be
NJM2825. Precision Micropower Shunt Voltage Reference
Precision Micropower Shunt Voltage Reference GENERAL DESCRIPTION NJM2825 is a precision and low quiescent current shunt voltage reference. Reference voltage form bandgap circuit has guaranteed the high
Adjustable Precision. A1semi. Electronics Ltd. Shunt Regulator AS431. Features: General Description: Applications: AS431Ver
General Description: The series ICs are three-terminal adjustable shunt regulators with guaranteed thermal stability over a full operation range.these ICs feature sharp turn-on characteristics, low temperature
Product Change Notices
Product Change Notices PCN No.:201100101 Date: 01/31/2011 This is to inform you that datasheet has been changed from Rev.B.04 to. This notification is for your information and concurrence. If you require
Lead-Free. Suffix 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel AP432(A) SOP-8L NA NA -7 NA NA NA NA
Lead-free Lead-free Lead-free AP432/AP432A Features Precision reference voltage AP432 : 1.24V ± 1% AP432A : 1.24V ± 0.5% Sink current capability: 200mA Minimum cathode current for regulation: 150μA Equivalent
TS431. Adjustable shunt voltage reference IC (automotive for SOT23-5) Description. Features. Z TO92 (plastic package)
Adjustable shunt voltage reference IC (automotive for SOT235) Datasheet production data Z TO92 (plastic package) L SOT235 (plastic micropackage) Description The TS431 is a lowvoltage, threeterminal, adjustable
TL431C, TL431AC, TL431I, TL431AI, TL431M, TL431Y ADJUSTABLE PRECISION SHUNT REGULATORS
Equivalent Full-Range Temperature Coefficient... 0 ppm/ C 0.-Ω Typical Output Impedance Sink-Current Capability...1 ma to 100 ma Low Output Noise Adjustable Output Voltage...V ref to 6 V Available in a
June 2012 Rev FEATURES. Fig. 1: SPX431L Precision Adjustable Shunt Regulator
June 2012 Rev. 2.0.0 GENERAL DESCRIPTION The SPX431L is a 3-terminal adjustable shunt voltage regulator providing a highly accurate bandgap reference. The SPX431L acts as an open-loop error amplifier with
SPX2431. Precision Adjustable Shunt Regulator. Description. Functional Block Diagram. Cathode (K) Reference (R) 2.5V. Anode (A)
Precision Adjustable Shunt Regulator Description The is a 3-terminal adjustable shunt voltage regulator providing a highly accurate bandgap reference. The acts as an open-loop error amplifier with a 2.5V
TS V adjustable shunt voltage reference. Description. Features. Applications
1.24 V adjustable shunt voltage reference Datasheet - production data Battery chargers Switch mode power supply Battery operated equipment SOT23-3L (Plastic micropackage) Description The is an adjustable
PIN CONFIGURATION FEATURES ORDERING INFORMATION EQUIVALENT CIRCUIT. D,F, N Packages
DESCRIPTION The µa723/µa723c is a monolithic precision voltage regulator capable of operation in positive or negative supplies as a series, shunt, switching, or floating regulator. The 723 contains a temperature-compensated
2.495V Programmable Shunt Voltage Reference FEATURES APPLICATION. SMPS Lighting TS431CS RLG. Pin Definition: 1. Reference 2. Cathode 3.
GENERAL DESCRIPTION 2.495V Programmable Shunt Voltage Reference series integrated circuits are three-terminal programmable shunt regulator diodes. These monolithic IC voltage references operate as a low
ZR2431. V Z V ref. G nd ADJUSTABLE PRECISION ZENER SHUNT REGULATOR ISSUE 3 DECEMBER 1997 DEVICE DESCRIPTION FEATURES APPLICATIONS SCHEMATIC DIAGRAM
ADJUSTABLE PRECISION ENER SHUNT REGULATOR ISSUE 3 DECEMBER 1997 431 DEICE DESCRIPTION The 431 is a three terminal adjustable shunt regulator offering excellent temperature stability and output current
ADJUSTABLE PRECISION SHUNT REGULATORS General Description. Features. Applications
General Description The series ICs are three-terminal adjustable shunt regulators with guaranteed thermal stability over a full operation range. These ICs feature sharp turn-on characteristics, low temperature
SC431M. Adjustable Shunt Regulator. Description. Features. Applications. Typical Application Circuit
SC431M Adjustable Shunt Regulator Features Wide operating current range 130µA to 150mA Low dynamic output impedance 0.25Ω typ. Trimmed bandgap + 0.5% Alternate for TL1431, TL431, LM431& AS431 Military
Alfa-MOS Technology. AF431N 36V High Voltage Adjustable Precision Shunt Regulators
General Description The is high-voltage three-terminal adjustable voltage references, with specified thermal stability over applicable industrial and commercial temperature ranges. Output voltage can be
ZTL431/ZTL432. Pin Assignments. Description. Features. Applications COST EFFECTIVE ADJUSTABLE PRECISION SHUNT REGULATOR ZTL431/ZTL432
COST EFFECTIVE ADJUSTABLE PRECISION SHUNT REGULATOR Description The ZTL431 and ZTL432 are three terminal adjustable shunt regulators offering excellent temperature stability and output current handling
Power Management GL431
Description The is a three terminal adjustable shunt regulator with thermal stability guaranteed over temperature. Output voltage can be adjusted to any value between.5v (V ) and 36V by using two external
AP432/AP432A. General Description. Features. Typical Application Circuit ADJUSTABLE PRECISION SHUNT REGULATOR V IN V OUT. C out.
Features General Description Precision reference voltage AP432 : 1.24V ± 1% AP432A : 1.24V ± 0.5% Sink current capability: 200mA Minimum cathode current for regulation: 150μA Equivalent full-range temp
AN431. Pin Assignments. Description. Features. Applications. Typical Applications Circuit. A Product Line of. Diodes Incorporated
ADJUSTABLE PRECISION SHUNT REGULATORS Description The series ICs are three-terminal adjustable shunt regulators with guaranteed thermal stability over a full operation range. These ICs feature sharp turn-on
Advanced Monolithic Systems
Advanced Monolithic Systems AMS431L 1.2V SHUNT REGULATOR FEATURES Trimmed.5% Tolerance Wide Operating Current Range 6µA to ma Low Reference Input Current.4µA Low Dynamic Output Impedance Low Output Noise
. ADJUSTABLE OUTPUT VOLTAGE :
PROGRAMMABLE VOLTAGE REFERENCE. ADJUSTABLE OUTPUT VOLTAGE : Vref to 36V SINK CURRENT CAPABILITY : 1 to 100mA. TYPICAL OUTPUT IMPEDANCE : 0.22W 1% AND 2% VOLTAGE PRECISION Z TO92 (Plastic Package) DESCRIPTION
TS431-Z Adjustable Precision Shunt Regulator
SOT-23 TS431-Z Pin Definition: 1. Reference 2. Cathode 3. Anode TS431AR-Z Pin Definition: 1. Cathode 2. Reference 3. Anode General Description TS431 integrated circuits are three-terminal programmable
PROGRAMMABLE PRECISION SHUNT REGULATOR
/AZ/CZ FEATURES Programmable Output Voltage to 40V Guaranteed 0.5% Reference Voltage Tolerance Low (0.2Ω Typ.) Dynamic Output Impedance Cathode Current Range(Continuous) 100 ~ 150 ma Equivalent Full Range
ADJUSTABLE PRECISION SHUNT REGULATOR
Descriptions The AP432 and AP432A are 3-terminal adjustable precision shunt regulators with guaranteed stable temperature over the applicable extended commercial temperature range. The output voltage may
TS V MICROPOWER SHUNT VOLTAGE REFERENCE 2.5V OUTPUT VOLTAGE ULTRA LOW CURRENT CONSUMPTION:
2.5V MICROPOWER SHUNT VOLTAGE REFERENCE 2.5V OUTPUT VOLTAGE ULTRA LOW CURRENT CONSUMPTION: 4µA TYP. HIGH PRECISION @ 25 C ±2% and ±1% HIGH STABILITY WHEN USED WITH CAPACITIVE LOAD INDUSTRIAL TEMPERATURE
TA76432FT,TA76432FC,TA76432F,TA76432FR,TA76432S
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA76432FT/FC/F/FR/S TA76432FT,TA76432FC,TA76432F,TA76432FR,TA76432S 1.26V Adjustable High-Precision Shunt Regulators The TA76432 series consists
200mA Regulator IC Monolithic IC MM3404 Series
2mA Regulator IC Monolithic IC MM344 Series 2mA Regulator IC MM344 Series Outline This IC is a high speed response 2mA regulator IC with low quiescent current and high ripple rejection. No load input current
Super-Small Package PWM Control Step-up Switching Regulator. Designator Symbol Description Designator Symbol Description. B CE without EXT P SOT-89-5L
Super-Small Package PWM Control Step-up Switching Regulator General Description The is a compact, high efficiency, and low voltage step-up DC/DC converter with an Adaptive Current Mode PWM control loop,
AT432 Low Voltage Adjustable Shunt Regulator
FEATURES DESCRIPTION Low voltage operation (down to 1.24V) Wide operating current range 80µA to 100mA 0.2Ω Typical output impedance Voltage reference tolerance 1% for B series and 0.5% for A series Pin-to-Pin
300mA LDO Monolithic IC MM3571 Series
3mA LDO Monolithic IC MM3571 Series Outline This IC is a 3mA Low dropout regulator IC with a prevention circuit of rush current. No load input current is 25µA typ, and it reduce transient drop in voltage
200mA LDO Monolithic IC MM1836 Series
2mA LDO Monolithic IC MM1836 Series Outline This IC is a 2mA Low dropout regulator IC with ON/OFF control. The IC applies to a standard home equipments, for a maximum operating voltage is 14V. Package
LT433NCRPA ADJUSTABLE PRECISION SHUNT REGULATION. General Description. Features. Applications. Block Diagram & Symbol 2017/06/16
General Description The LT433NCRPA is a low voltage three terminal adjustable shunt regulator with a guaranteed thermal stability over applicable temperature ranges. The output voltage can be set to any
Quad Ground Sense Operational Amplifier. The CO324 is monolithic IC with four built-in operational amplifiers featuring internal phase compensation.
The CO4 is monolithic IC with four built-in operational amplifiers featuring internal phase compensation. Either a dual or single power supply can be driven, and these products can be driven by a digital
Quad ground sense operational amplifier
Quad ground sense operational amplifier BAA / BAAF / BAAFV The BAA, BAAF, and BAAFV are monolithic ICs with four built-in operational amplifiers featuring internal phase compensation. Either a dual or
AP431i. Description. Features NEW PRODUCT. Applications. Pin Assignments. A Product Line of. Diodes Incorporated
Description The is a 3-terminal adjustable shunt regulator with guaranteed thermal stability over a full operation range. It features sharp turn-on characteristics, low temperature coefficient and low
XC6201 Series GENERAL DESCRIPTION FEATURES APPLICATIONS TYPICAL PERFORMANCE CHARACTERISTICS TYPICAL APPLICATION CIRCUIT. Positive Voltage Regulators
ETR0301_004 Positive Voltage Regulators GENERAL DESCRIPTION The XC6201 series are highly precise, low power consumption, positive voltage regulators manufactured using CMOS and laser trimming technologies.
V OUT. PACKAGE ORDER INFORMATION Initial. DM Plastic SOIC LP Plastic TO-92 3-pin
T HE I N F I N I T E P OWER OF I NNOVATION DESCRIPTION KEY FEATURES The series precision adjustable three terminal shunt voltage regulators are pin-to-pin compatible with the industry standard TL431. The
High Speed Low Dropout Middle Current Voltage Regulators. Designator Symbol Description Designator Symbol Description CE Pin Logic :
High Speed Low Dropout Middle Current Voltage Regulators General Description The series are highly precise, low noise, positive voltage LDO regulators manufactured using CMOS processes. The series achieves
*1. Attention should be paid to the power dissipation of the package when the load is large.
Rev.3._ HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR Features The S-L298 series is a positive voltage regulator with a low dropout voltage, high output voltage accuracy, and low current consumption
LM431SA, LM431SB, LM431SC. Programmable Shunt Regulator
A, B, C Programmable Shunt Regulator Description The A / B / C are three terminal the output adjustable regulators with thermal stability over operating temperature range. The output voltage can be set
ZTL431AQ, ZTL431BQ ZTL432AQ, ZTL432BQ. Pin Assignments. Description. Features. Typical Application. Applications
AUTOMOTIVE COMPLIANT ADJUSTABLE PRECISION SHUNT REGULATOR Description The ZTL431AQ, ZTL431BQ, ZTL432AQ and ZTL432BQ are three terminal adjustable shunt regulators offering excellent temperature stability
TLVH431 family. Low voltage adjustable precision shunt regulators
Rev. 1 27 April 2012 Product data sheet 1. General description 2. Features and benefits Low voltage three-terminal shunt regulator family with an output voltage range between V ref (1.24 V) and 18 V, to
ADJUSTABLE PRECISION SHUNT REGULATORS General Description. Features. Applications
General Description Features The is a three-terminal adjustable shunt regulator with guaranteed thermal stability over a full operation range. It features sharp turn-on characteristics, low temperature
Description. Table 1: Device summary. October 2015 DocID2577 Rev 9 1/19 This is information on a product in full production.
LM317MDT LM317 D-PAK TO-252 Medium current 1.2 to 37 V adjustable voltage regulator Datasheet - production data Description The LM217M and LM317M are monolithic integrated circuits in DPAK package used
NOT RECOMMENDED FOR NEW DESIGN USE AP2127N/K/
300mA ADJUSTABLE HIGH PSRR CMOS LINEAR REGULATOR Description Pin Assignments The is a positive, adjustable linear regulator. It features low quiescent current (65µA typ.) and low dropout voltage, making
APL431L. General Description. Applications. Symbol. Functional Diagram. Low Voltage Adjustable Precision Shunt Regulator
Low Voltage Adjustable Precision Shunt Regulator Features Precise Reference Voltage to 1.24V Guaranteed.5% or 1% Reference Voltage Tolerance Sink Current Capability, 8uA to 1mA Quick Turn-on Adjustable
Features. Applications
Description LOW CATHODE CUREENT ADJUSTABLE PRECISION SHUNT REGULATOR Features The is a three-terminal adjustable shunt regulator with guaranteed thermal stability over a full operation range. It features
OPTICALLY ISOLATED ERROR AMPLIFIER FOD2711 DESCRIPTION FEATURES APPLICATIONS PIN DEFINITIONS 9/6/02
DESCRIPTION The Optically Isolated Amplifier consists of the popular RC4A precision programmable shunt reference and an optocoupler. The optocoupler is a gallium arsenide (GaAs) light emitting diode optically
SP431. High Voltage Adjustable Precision Shunt Regulators
DESCRIPTION The SP431 is high-voltage three-terminal adjustable voltage references, with specified thermal stability over applicable industrial and commercial temperature ranges. Output voltage can be
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.3.2_ HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR S-12 Series The S-12 Series is a positive voltage regulator with a low dropout voltage, high output voltage
Distributed by: www.jameco.com -800-8- The content and copyrights of the attached material are the property of its owner. DESCRIPTION The FOD Optically Isolated Amplifier consists of the popular KA precision
1A Low Dropout Linear Regulator
1A Low Dropout Linear Regulator Description The series are low dropout, positive linear regulators with very low quiescent current. The can supply 1A output current with a low dropout voltage at about
CMOS Regulator Monolithic IC MM303X Series
CMOS Regulator Monolithic IC MM33X Series CMOS Regulator MM33X Series Outline This IC is a voltage regulator IC developed using the CMOS process. Super low consumption current of µa typ. (MM33X) (when
Low-Saturation voltage 300mA LDO Monolithic IC MM334x Series
Low-Saturation voltage 3mA LDO Monolithic IC MM334x Series Low-Saturation voltage 3mA LDO MM334x Series Outline This IC is a 3mA LDO with an ultra-low saturation voltage. This device features a 3 ma current
TL494 PULSE-WIDTH-MODULATION CONTROL CIRCUITS
Complete PWM Power-Control Circuitry Uncommitted Outputs for 200-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either
NJM2830 LOW DROPOUT VOLTAGE REGULATOR
LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION The is a 3mA output low dropout voltage regulator with ON/OFF control. Advanced Bipolar technology achieves low noise, high ripple rejection and low quiescent
PRODUCTION DATA SHEET
The TL4/TL4A/TL4B series precision adjustable three terminal shunt voltage regulators are pin-to-pin compatible with the industry standard TL4. The output voltage of this reference is programmable by using
NJM2887 ADJUSTABLE LOW DROPOUT VOLTAGE REGULATOR
ADJUSTABLE LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION The NJM887 is an adjustable low dropout voltage regulator with ON/OFF control. Advanced Bipolar technology achieves low noise, high ripple rejection
SEATING PLANE FUNCTIONAL BLOCK DIAGRAM 8 LED
DESCRIPTION The Optically Isolated Amplifier consists of the popular RC41A precision programmable shunt reference and an optocoupler. The optocoupler is a gallium arsenide (GaAs) light emitting diode optically
Low Noise 300mA LDO Regulator General Description. Features
Low Noise 300mA LDO Regulator General Description The id9301 is a 300mA with fixed output voltage options ranging from 1.5V, low dropout and low noise linear regulator with high ripple rejection ratio
Low Quiescent Current_Low Dropout CMOS Voltage Regulator
Low Quiescent _Low Dropout CMOS Voltage Regulator HM53XX Series 500mA Ferture: high output accuracy ±2% low dropout 1.5mV Iout=1mA low quiescent current Max input Output current Applications ⒈2uA 10V 500mA
SP435W Dual OP AMP with Voltage Regulator
DESCRIPTION The SP435W is a monolithic IC specifically designed to control the output current and voltage levels of switch mode battery chargers and power supplies. The device contains two operational
OPERATIONAL AMPLIFIERS
VOLTAGE AND CURRENT CONTROLLER OPERATIONAL AMPLIFIERS LOW SUPPLY CURRENT : 200µA/amp. MEDIUM SPEED : 2.1MHz LOW LEVEL OUTPUT VOLTAGE CLOSE TO V - CC : 0.1V typ. INPUT COMMON MODE VOLTAGE RANGE INCLUDES
VRR Series. AnaSem. High speed, Low dropout, ±1% High output accuracy CMOS Voltage Regulator with On/Off circuit. Analog Semiconductor IC. AnaSem Inc.
AnaSem Analog Semiconductor IC High speed, Low dropout, ±% High output accuracy CMOS Voltage Regulator with On/Off circuit Rev. E9- Rev. E9- AnaSem Products Data Sheet Analog Semiconductor IC High speed,
Dual operational amplifier
Dual operational amplifier The BA8, BA8F, and BA8N are monolithic ICs with two operational amplifiers featuring low power consumption and internal phase compensation mounted on a single silicon chip. These
HIGH ISOLATION VOLTAGE HIGH SPEED PHOTOCOUPLER
FEATURES HIGH ISOLATION VOLTAGE BV: 5 k Vr.m.s. MIN HIGH PROPAGATION DELAY TIME, : 5 ns TYP LOW INPUT CURRENT IFHL: 2.5 ma TYP CAN BE SOLDERED BY INFRARED REFLOW SOLDERING TAPING PRODUCT NUMBER PS91L-E3,
±2.5 C ( 55 to +130 C) mv/ C Typ. Ta = 30 C: V Typ. Ta = +30 C: V Typ. Ta = +130 C: V Typ. ±0.4% Typ.
Rev.1.2_00 CMOS TEMPERATURE SENSOR IC The is a high-accuracy temperature sensor IC on a single chip, provides output voltage which is linear against the temperature change. Each chip consists of a temperature
id id mA, Low Dropout, Low Noise Ultra-Fast With Soft Start CMOS LDO Regulator Features General Description Applications
500mA, Low Dropout, Low Noise Ultra-Fast With Soft Start CMOS LDO Regulator General Description The is a 500mA, low dropout and low noise linear regulator with high ripple rejection ratio. It has fixed
High Ripple-Rejection Low Dropout CMOS Voltage Regulator
High Ripple-Rejection Low Dropout CMOS Voltage Regulator General Description The Series is a positive voltage regulator with a low dropout voltage, high output voltage accuracy, and low current consumption
Table of Contents. Appendix Package Outline Drawings Quality Assurance and Reliability Program...181
Table of Contents Table of Contents...1 Introduction...3 General Ordering Information...4 Package Marking Information...5 Alternate Source and Product Cross-Reference...6 Product Status Definitions...7
Low-Saturation voltage 1.5A LDO Monolithic IC MM185x Series
Low-Saturation voltage.5a LDO Monolithic IC MM85x Series Outline This IC is a.5a LDO with a low saturation voltage. In addition to a low-saturation voltage (.6V typ., IO=.5 A), the device has a low voltage
AS431H. Description. Pin Assignments NEW PRODUCT. Features. Applications ADJUSTABLE PRECISION SHUNT REGULATORS AS431H ANODE CATHODE ANODE CATHODE REF
ADJUSTABLE PRECISION SHUNT REGULATORS Description Pin Assignments The is a three-terminal adjustable shunt regulator with guaranteed thermal stability over a full operation range. It features sharp turn-on
ZSAT600 6 VOLT ENHANCED POSITIVE LOCAL VOLTAGE REGULATOR ISSUE 1 - AUGUST 1996 DEVICE DESCRIPTION FEATURES APPLICATIONS SCHEMATIC DIAGRAM. Vin.
6 VOLT ENHANCED POSITIVE LOCAL VOLTAGE REGULATOR ISSUE 1 - AUGUST 1996 DEVICE DESCRIPTION The ZSAT6 is an enhanced three terminal fixed positive 6 volt regulator. The device is designed particularly for
Advanced Regulating Pulse Width Modulators
Advanced Regulating Pulse Width Modulators FEATURES Complete PWM Power Control Circuitry Uncommitted Outputs for Single-ended or Push-pull Applications Low Standby Current 8mA Typical Interchangeable with
id9309 Ultra-Low Noise Ultra-Fast 300mA LDO Regulator Features
Ultra-Low Noise Ultra-Fast 300mA LDO Regulator General Description The id9309 is a 300mA, low dropout and low noise linear regulator with high ripple rejection ratio and fast turn-on time. It has fixed
TL494C, TL494I, TL494M, TL494Y PULSE-WIDTH-MODULATION CONTROL CIRCUITS
Complete PWM Power Control Circuitry Uncommitted Outputs for 00-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either
VRH Series. AnaSem. High speed, Low dropout, ±1% High output accuracy CMOS Voltage Regulator with On/Off circuit. Analog Semiconductor IC.
安纳森 Analog Semiconductor IC High speed, Low dropout, ±% High output accuracy CMOS Voltage Regulator with On/Off circuit (IMPORTANT: Please check the last page for Genuine Product Labeling) Rev. E- Website:
High Speed PWM Controller
High Speed PWM Controller FEATURES Compatible with Voltage or Current Mode Topologies Practical Operation Switching Frequencies to 1MHz 50ns Propagation Delay to Output High Current Dual Totem Pole Outputs