Intermittent Vibration 0.075

Size: px

Start display at page:

Download "Intermittent Vibration 0.075"

Cassandra Bates
5 years ago
Views:

FEATURES DESCRIPTION PLC-COM-CM1 Series Multi Drop Configuration of up to 32 Units Baud Rates Range from 300 to 38,400 bps 1:1/1:N/N:M (RS-422) Communication is Supported Full-Duplex (RS-422) and

1 FEATURES DESCRIPTION PLC-COM-CM1 Series Multi Drop Configuration of up to 32 Units Baud Rates Range from 300 to 38,400 bps 1:1/1:N/N:M (RS-422) Communication is Supported Full-Duplex (RS-422) and Half-Duplex (RS-485) are Supported Ethernet Module Supports ARP, ICMP, IP, TCP and UDP High-Speed Data Communication Among Modules Communication with 4 Stations Simultaneously. Supports DNP3.0 Protocol (PLC-COM-CM1-EC01DNP) The CIMON line of Communication Modules allows the user to incorporate additional units into a system without having to worry about numerous communication protocols. The communication line offers RS232C, RS422/285, Ethernet, BACnet, Profibus, CDMA and CANopen which allows for the integration of a SCADA system to alert users of all facets of the production line. The RS232C and RS422/485 units are utilized for communication with production line controllers/drives via MODBUS or any other ASCII based protocol. Ethernet provides high speed up to 100Mbps so the user can forward real-time data to a Supervisory Software. The Profibus communication module enables seamless communication between different manufacturers devices. The BACnet module can be used in various applications such as HVAC control systems, lighting control systems, security systems and many more. GENERAL SPECIFICATIONS Items Operating Temp Storage Temp Operating Humidity Storage Humidity Vibration Shocks Impulse Noise Frequency 10 < f < 57Hz 57 < f < 150Hz Specification -10 ~ 65 C -25 ~ 80 C 5 ~ 95% RH, (Non-condensing) 5 ~ 95% RH, (Non-condensing) Intermittent Vibration Acceleration Amplitude m/s2 {1G} - Reference Sweep X, Y, Z Continuous Vibration Each direction, Frequency Acceleration Pulse Width 10 times 10 < f 0.035mm < 57Hz 57 < f 4.8m/s2 {0.5G} < 150Hz Peak acceleration: 147 m/s2 Duration: 11ms Pulse wave type: Half-sine (3 times each X, Y, Z) Square wave + 2,000V impulse noise Electrostatic Voltage:4kV (Contact discharge) discharge Radiated electro27 ~ 500MHz, 10V/m magnetic field noise Digital I/O Digital I/O (24V or less) Power Fast Transient/Burst (24V or more) Analog I/O Comm. Noise Interface 2kV 1kV 0.25kV Operation Ambience Altitude Pollution Degree Cooling Method IEC KDT Standard IEC IEC IEC IEC Free from corrosive gases and excessive dust 2,000m or less 2 or less Air cooling L East Orangefair Ln. Anaheim, CA Tel. (714) Fax. (714)

2 PLC-DIO-CM1 Digital Inputs PLC-DIO-CM1 Digital Inputs Serial Communication Modules SERIAL MODULE SPECIFICATIONS Communication Method Operation Method Data Type Model PLC-COM-CM1-SC02A PLC-COM-CM1-SC01A PLC-COM-CM1-SC01B Interface RS232C / 422 / 485 RS232C RS422 / 485 Null Model Leased-Line Modem Dial-up Modem User Protocol HMI Protocol MODBUS Protocol Graphic Loader Module Synchronous Type Baud Rates Direct communication between a PC and RS232C/422 port Communication using a leased-line modem Remote communication using a dial-up modem Communication using user protocol Communication using exclusive protocol Communication using Modicon protocl Controls a PLC, using a linking function in the CICON software Data Bits 7 or 8 Stop Bits 1 or 2 Parity Modem Link Function Cable Specifications Even / Odd / None Asynchronous 300 / 600 / 1,200 / 2,400 / 4,800 / 9,600 / 19,200 / 38,400 bps Long-distance communication linking modem To minimize the noise received a twisted-pair cable for RS-232 is to be used for the following communications RS-232C/422/485. If using RS-422 communication, a termination resistor is to be connected on each end of the cable. A termination resistor protects the signal from distortion in the event of long distance communication. The termination resistor should be 120Ω and rated for 1/2 a watt. COMMUNICATION PINOUTS RS232C RS-422/485 Connector Pin # Name Description 1 DCD Data Carrier Detect 2 RD Receive Data 3 TD Transmit Data 4 DTR Data Terminal Ready 5 SG Signal Ground 6 DSR Data Set Ready 7 RTS Request To Send 8 CTS Clear To Send 9 RI Ring Indicator Connector Pin No. Name Description 1 SDA Send Data A 2 SDB Send Data B 3 RDA Receive Data A 4 RDB Receive Data B 5 SG Signal Ground 6 FG Field Ground

3 PLC-COM-CM1-SC02A RS232C - used to connect with an outer device RS422/485 - used to connect with an outer device PLC-COM-CM1-SC02A

4 PLC-DIO-CM1 Digital Outputs PLC-COM-CM1-SC01A RS232C - used to connect with an outer device PLC-COM-CM1-SC01A

5 PLC-COM-CM1-SC01B RS422/485 - used to connect with an outer device PLC-COM-CM1-SC01B

Vibration 10 Times in X,Y,Z IEC In Case of Continuous Vibration

Vibration 10 Times in X,Y,Z IEC In Case of Continuous Vibration FEATURES LED Display to Monitor Running Conditions PhotoCoupler Insulated Snapin Installation Terminal BlockType 4bit (/6,84) or 6bit (/65,55) Resolution 4 or 8 Channels Voltage or DESCRIPTION PLCAIOCMAD