WaterMaster Electromagnetic flowmeter. Measurement made easy. The perfect fit for all water industry applications

Transcription

1 Data sheet DS/WM EN Rev. Q WaterMaster Measurement made easy The perfect fit for all water industry applications One solution for all your needs designed for use in all water and waste water applications, from sewage plants to distribution networks State-of-the-art technology revolutionary data storage enables transmitter interchange and commissioning without the need for re-configuration self-calibrating transmitter with ultra-low temperature coefficient for highest accuracy Versatile and simple configuration 'Through-the-Glass' (TTG) configuration eliminating the need to remove the cover smart key based functionality 'Easy Setup' function VeriMaster in situ verification software option enables the customer to perform in situ verification of the flowmeter system MID and OIML R49 approved with R49 self-checking Type-approved to accuracy Class and Class 2 for any pipe orientation and bidirectional flows Type P-approved continuous self-checking of the sensor and transmitter to ensure the highest accuracy and long term performance Innovative sensors for all applications optimized full-bore series for optimum turndown / low pressure drop, irrigation applications full-bore series for general-purpose water metering applications reduced-bore series for high turn down applications, for example, leakage buriable sensors eliminating the need for costly chamber construction HRT, PROFIBUS DP and MODBUS Full system and PLC integration Unparalleled service ability fault-finding Help texts on the display minimized downtime with replaceable electronics cartridges

2 The Company BB is an established world force in the design and manufacture of instrumentation for industrial process control, flow measurement, gas and liquid analysis and environmental applications. s a world leader in process automation technology our worldwide presence, comprehensive service and application-oriented know-how make BB a leading supplier of flow measurement products. Introduction Setting the standard for the Water Industry The WaterMaster range, available in sizes 0 to 2400 mm ( 3 /8 to 96 in.), is designed specifically for use on the many diverse applications encountered in the Water and Waste-water industry. The modular design concept offers flexibility, cost-saving operation and reliability while providing a long service life and exceptionally low maintenance. Integration into BB asset management systems and use of the self-monitoring and diagnostic functions increase the plant availability and reduce downtimes. VeriMaster the verification tool n easy-to-use utility, available through the infra red service port, it uses the advanced self-calibration and diagnostic capability of WaterMaster, coupled with fingerprinting technology, to determine the accuracy status of the WaterMaster flowmeter to within ± % of its original factory calibration. VeriMaster also supports printing of calibration verification records for regulatory compliance. Flow performance Utilizing its advanced filtering methods, the WaterMaster improves accuracy even under difficult conditions. WaterMaster has an operating flow range with ±0.4 % accuracy as standard (±0.2 % optional) in both forward and reverse flow directions. Easy and quick commissioning 'Fit-and-Flow' data storage inside WaterMaster eliminates the need to match sensor and transmitter in the field. On initial installation, the self-configuration sequence automatically replicates into the transmitter all calibration factors, meter size and serial numbers, as well as customer site-specific settings, eliminating the potential for error. Intuitive, convenient navigation The 'Easy Setup' function reliably guides unpracticed users through the menu step by step. The smart key based functionality makes handling a breeze it's just like using a cell phone. During configuration, the permissible range of each parameter is indicated on the display and invalid entries are rejected. Universal transmitter powerful and flexible The backlit display can be rotated easily without the need for tools. The contrast is adjustable and the display fully-configurable. The character size, number of lines and display resolution (number of decimal points) can be set as required. In multiplex mode, several different display options can be pre-configured and invoked one after the other. The smart modular design of the transmitter unit enables easy disassembly without the need to unscrew cables or unplug connectors. HRT is used as the standard communications protocol. Optionally, the transmitter is available with PROFIBUS DP or MODBUS communication. ssured quality WaterMaster is designed and manufactured in accordance with international quality procedures (ISO 900) and all flowmeters are calibrated on nationally-traceable calibration rigs to provide the end-user with complete assurance of both quality and performance of the flowmeter. Diagnostic functions Using its diagnostic functions, the flowmeter monitors both its own operability and the process. Limit values for the diagnostic parameters can be set locally. When these limits are exceeded, an alarm is tripped. In the event of an error, diagnostic-dependent help text appears on the display and this considerably simplifies and accelerates the troubleshooting procedure. In accordance with NMUR NE07, alarms and warnings are classified with the status of 'Maintenance Required', 'Check Function', 'Failure' and 'Out of Specification'. 2 DS/WM EN Rev. Q

3 WaterMaster always the first choice WaterMaster sets the standard for the water industry. The specification, features and user benefits offered by this range are based on BB's worldwide experience in this industry and they are all targeted specifically to the industry's requirements. Submersible and buriable WaterMaster sensors have a rugged, robust construction to ensure a long, maintenance-free life under the arduous conditions experienced in the Water and Waste Industry. The sensors are, as standard, inherently submersible (IP68, NEM 6P), thus ensuring suitability for installation in chambers and metering pits that are susceptible to flooding. unique feature of the WaterMaster sensors is that sizes DN40 to DN2400 ( /2 to 96 in. NB) are buriable; installation simply involves excavating to the underground pipe, fitting the sensor, cabling back to the transmitter and then backfilling the hole. Overview of the WaterMaster wide range of features and user benefits are built into WaterMaster as standard: bi-directional flow unique self-calibrating transmitter (patented) for the ultimate in stability and repeatability OIML-type continuous self-checking, with alarms, ensures both sensor and transmitter accuracy true electrode and coil impedance measurement comprehensive simulation mode universal switch-mode power supply (options are available for C and DC supplies) comprehensive self-diagnostics compliant with NMUR NE07 programmable multiple-alarm capability bus options: HRT (4 to 20 m), PROFIBUS DP (RS485), MODBUS (RS485) 3 configurable pulse / frequency and alarm outputs advanced infrared service port supports remote HMI, HRT, cyclic data out and parameter download VeriMaster in situ verification software available as option read-only switch and ultra-secure service password for total security The WaterMaster family DS/WM EN Rev. Q 3

4 OIML / MID approved WaterMaster has been type tested and Internationally approved to the highest accuracy class and 2 for cold and hot potable water meters OIML R49- (Organisation Internationale de Métrologie Légale). For full details, OIML R49 is available to download from Its requirements are very similar to other International standards, such as EN454 and ISO4064. WaterMaster has been assessed by type approval at the National Measurement Office (NMO) to OIML R49 and passed to the very highest accuracy designations for sizes DN40 to DN200 ( /2 to 8 in. NB). The approval is for: Class and Class 2 accuracy (calibration option) Environmental class T50 for water temperatures of 0. to 50 C (32.8 to 22 F) Electromagnetic Environment E2 (0 V/m) ny pipe orientation 5 Diameters upstream pipe 0 Diameters downstream pipe Pressure Loss Class <0.25 bar (3.62 psi) Integral or remote transmitter (<200 m [<656 ft.] cable) DN40 to DN200 ( /2 to 8 in. NB), bi-directional flow major advance in WaterMaster is the self-checking capabilities that meet and exceed the R49 requirements and is the first electromagnetic flowmeter to be approved to OIML Type P permanent self checking during normal operation (not just at startup) and alarm indication for: transmitter and sensor status, with an accuracy alarm program ROM and RM status double, independent storage of totalizer values, in both the sensor and transmitter non-volatile memories display test Superior control through advanced sensor design The innovative, patented octagonal sensor design improves flow profile and reduces up- and down-stream piping requirements for the most commonly used sizes of 40 to 200 mm ( /2 to 8 in.). This optimized full bore meter provides impressive results in the most difficult of installation requirements. WaterMaster sensors are also available in reduced-bore geometries giving the ultimate in low-flow performance with a very high turn-down range. The unique design of the reduced-bore sensor conditions the flow profile in the measuring section so that distortions in the flow profile, either upstream or downstream, are flattened. The result is excellent in situ flowmeter performance, even with very bad hydraulic installation conditions. The OIML R49- certificate of conformity is available from: c2573de003db93b.aspx WaterMaster is also approved under the EU Measuring Instruments Directive (MID) 2004/22/EC, that covers putting into use water flowmeters for certain applications. MID WaterMaster is secured against tamping and is available as an option, along with fingerprinting for BB VeriMaster in situ verification product, with certificate printout to ± % accuracy. WaterMaster certificates of EC type-examination of a measuring instrument are available from: c2573de003db93b.aspx 4 DS/WM EN Rev. Q

5 Specification WaterMaster specification to OIML R49 Class DN00 (4 in. NB) WaterMaster Class Specification Error (%) Typical Meter Performance ±0.2 % ±0.9 mm/s whichever is the greater round Q2 the performance is ±0.7 mm/s OIML R49 Class ccuracy Limits 0. (0.44).0 (4.4) 0 (44) 00 (440) 000 (4402) Flowrate m 3 /h (GPM) WaterMaster specification to OIML R49 Class 2 WaterMaster Class 2 Specification DN00 (4 in. NB) Error (%) Typical Meter Performance ±0.4 % ±0.9 mm/s whichever is the greater ±0.4 % OIML R49 Class 2 ccuracy Limits Q3 0. (0.44).0 (4.4) 0 (44) 00 (440) 000 (4402) Flowrate m 3 /h (GPM) lthough OIML R49 does not define the flow accuracy below Q, WaterMaster continues to measure flow at lower flow rates down to a cutoff velocity of ±5 mm/s (±0.2 in./s). The accuracy between cutoff and Q is typically ±0.9 mm/s (±0.04. in./s). DS/WM EN Rev. Q 5

6 WaterMaster optimized full-bore meter (FEV) / full-bore meters (FEF, FEW) flow performance m 3 /h Standard Calibration 0.4 % Class 2 High ccuracy Calibration 0.2 % Class DN Q4 Q3 Q0.4% Q2 Q Q0.2% Q2 Q * * * * * * * *,250, ,000, ,25 2, ,000 4, ,000 4, ,875 6, ,875 6, ,500 0, ,000 6, ,000 6, in (760) 20,000 6, ,000 6, ,250 25, ,250 25, in 3,250 25, ,250 25, ,000 40, ,750 63, ,750 63, ,750 63, in (500) 78,750 63, ,750 63, ,750 63, ,000 00, ,000 00, ,000 00, ,000 60, ,000 60, * OIML R49 Certificate of Conformance to Class and Class 2, with OIML R49 and MID versions available. Note. OIML R49 allow Class only for meters with Q3 00 m 3 /h. Meters outside this range have been tested and conform to Class. 6 DS/WM EN Rev. Q

7 WaterMaster optimized full-bore meter (FEV) / full-bore meters (FEF, FEW) flow performance gal/min Standard Calibration 0.4 % Class 2 High ccuracy Calibration 0.2 % Class NPS/NB (DN) Q4 Q3 Q0.4% Q2 Q Q0.2% Q2 Q 3 /8 (0) /2 (5) /4 (20) (25) /4 (32) /2 (40) (50) /2 (65) (80) (00),376, (25),376, (50) 3,467 2, (200) 5,504 4, (250) 8,806 7, (300) 3,759, , (350) 22,04 7,6, , (400) 22,04 7,6, , (450) 34,673 27,738, , (500) 34,673 27,738, , (600) 55,036 44,029 2, , /28* (700) 88,057 70,446 7, , (750) 88,057 70,446 7, , (760) 88,057 70,446 7, , (800) 88,057 70,446 7, , (900) 37,590 0,072, ,007, /40* (000) 37,590 0,072, ,007, (050) 37,590 0,072, ,007, (00) 37,590 0,072, ,007, (200) 220,43 76,5 7,6, ,6,76,0 52 (350) 346, ,38 27,738,775,0 27,738 2,773, (400) 346, ,38 27,738,775,0 27,738 2,773, (500) 346, ,38 27,738,775,0 27,738 2,773, (600) 346, ,38 27,738,775,0 27,738 2,773, (650) 346, ,38 27,738,775,0 27,738 2,773, (800) 550, ,287 44,029 2,88,76 44,029 4,403 2, (950) 550, ,287 44,029 2,88,76 44,029 4,403 2, (2000) 550, ,287 44,029 2,88,76 44,029 4,403 2, (2000) 550, ,287 44,029 2,88,76 44,029 4,403 2, (2200) 880, ,459 70,446 4,509 2,88 70,446 7,045 4, (2400) 880, ,459 70,446 4,509 2,88 70,446 7,045 4,403 *Size is dependent on flange specification WaterMaster reduced-bore meter (FER) flow performance m 3 /h (gal/min) Class 2 specification Class specification Size Q4 Q3 Q0.4 % Q2 Q Q0.2 % Q2 Q R mm in. m 3 / h (Ugal / min) m 3 / h (Ugal / min) m 3 / h (Ugal / min) m 3 / h (Ugal / min) m 3 / h (Ugal / min) m 3 / h (Ugal / min) m 3 / h (Ugal / min) m 3 / h (Ugal / min) 40 /2 3 (38) 25 (0) 0.83 (.05) (0.28) 0.04 (0.8) (7.48) 0. (0.44) (0.28) (220) 40 (76).0 (4.40) 0. (0.44) (0.28) (8.8) 0.6 (0.7) 0. (0.44) /2 79 (347) 63 (277).6 (7.04) 0.6 (0.7) 0. (0.44) (0.56) 0.25 (.) 0.6 (0.7) (550) 00 (440) 2.0 (8.80) 0.25 (.) 0.6 (0.7) (7.6) 0.4 (.76) 0.25 (.) (880) 60 (704) 3.2 (0.56) 0.4 (.8) 0.25 (.) (28) 0.64 (2.8) 0.4 (.76) (880) 60 (704) 3.2 (0.56) 0.4 (.8) 0.25 (.) (28) 0.64 (2.8) 0.4 (.76) (2200) 400 (760) 8.0 (35.20).0 (4.4) 0.63 (2.77) (70.4).6 (7).0 (4.4) (3470) 630 (2770) 3.0 (57.2).6 (7.04).0 (4.4) (0) 2.5 ().6 (7) (5500) 000 (4400) 20 (88) 2.5 (.0).6 (7) (76) 4.0 (7.6) 2.5 () (880) 600 (7045) 32 (40.8) 4. (8.05) 2.5 () (28.6) 6.4 (28) 4.0 (7.6) (880) 600 (7045) 32 (40.8) 6.4 (28.8) 4.0 (7.6) (28.6) 2.8 (56) 8.0 (35.2) (880) 600 (7045) 32 (40.8) 6.4 (28.8) 4.0 (7.6) (28.6) 2.8 (56) 8.0 (35.2) (3760) 2500 (007) 50 (220) 0 (44) 6.3 (27.7) (440) 20 (88) 2.5 (55) (3760) 2500 (007) 50 (220) 0 (44) 6.3 (27.7) (440) 20 (88) 2.5 (55) (2204) 4000 (760) 80 (352) 6 (70.45) 0 (44) (70.4) 32 (4) 20 (88) (34670) 6300 (27740) 26 (554.4) 25.2 (0.9) 5.8 (70) (08) 50.4 (222) 3.5 (38.7) 200 R DS/WM EN Rev. Q 7

8 Specification sensor Functional specification Pressure limitations s per flange rating non approved PN6 for OIML R49, MID pproved Pressure equipment directive 97/23/EC This product is applicable in networks for the supply, distribution and discharge of water and associated equipment and is therefore exempt. Temperature limitations mbient temperature Remote transmitter 20 to 70 C ( 4 to 58 F) Integral transmitter 20 to 60 C ( 4 to 40 F) Process temperature See table below. 0. to 50 C (32.2 to 22 F) OIML R49 T50 pproved Medium temperature C ( F) Code Lining Flange material Minimum Maximum Carbon steel 5 (23) 80 (76) FEF, FEW3 Hard rubber Stainless steel 5 (23) 80 (76) Carbon steel 0 (4) 30 (266) FEW PTFE Stainless steel 25 ( 3) 30 (266) Carbon steel 0 (4) 30 (266) FEW3 PTFE Stainless steel 0 (4) 30 (266) Carbon steel 5 (23) 80 (76) FEW3 Elastomer Stainless steel 5 (23) 80 (76) FEF, FER Elastomer 6 (2) 70 (58) Carbon steel FEV Polypropylene 6 (2) 70 (58) IP rating IP68 (NEM 6) to 7m(20ft.) depth Note. Not sizes DN0 to DN32 ( 3 /8 /4 in. NB) IP67 (NEM 4X) DN0 to DN32 ( 3 /8 /4 in. NB) Buriable (sensor only) FEV, FEF and FEW DN450 to 2400 (8 to 96 in. NB) to 5 m (6 ft.) depth Conductivity >5µS cm Transmitter mounting Integral (not FEF) or remote Electrical connections 20 mm glands /2 in. NPT 20 mm armored glands Sensor cable BB WaterMaster cable available in two forms standard and armored Maximum length 200 m (660 ft.) Physical specification Wetted parts Electrode material Stainless steel 36 L/36Ti Super-austenitic steel Hastelloy C-22 and Hastelloy C4 (other electrode materials available on request) Potential equalizing rings Minimum of recommended Lining material / potable water approvals *Size is dependent on flange specification Lining protection plates Not required Installation conditions (recommended) Upstream 5D Downstream 2D Pressure loss Potable Water pprovals Code Size Range Liner WRS WRS 60 C CS DVGW NSF Z/ NZS 4020 FEW FEW3 FEW3 FEW3 FEV FEF FEF FER DN0 32 ( 3 /8 /4 in. NB) DN0 600 ( 3 /8 24 in. NB) DN ( /2 96 in. NB) DN ( /2 96 in. NB) DN ( /2 8 in. NB) DN (0 24 in. NB) DN (0 24 in. NB) DN ( /2 24 in. NB) PTFE PTFE Elastomer Pending Hard rubber Polypropylene NSF approved material NSF-6 Elastomer NSF-6 Hard rubber NSF approved material Elastomer Negligible at Q3 ll full bore meters <0.25 bar (<3.62 psi) at Q3 FEV (DN40 to 200 [ /2 to 8 in. NB]) <0.63 bar (<9.3 psi) at Q3 FER (DN40 to 600 [ /2 to 24in. NB]) 8 DS/WM EN Rev. Q

9 Non-wetted parts Flange material Carbon steel Stainless steel SG iron DN20 to DN2400 ( 3 /4 to 96 in. NB) DN0 to DN2400 ( 3 /8 to 96 in. NB) FEV DN40 to DN50 [ /2 to 6 in. NB) FER DN40 to DN50 [ /2 to 6 in. NB) Housing material Carbon steel Plastic luminium FEV DN40 to 200 ( /2 to 8 in. NB) FEW DN450 to 2400 (8 to 96 in. NB) FEF DN250 to 600 (0 to 24 in. NB) FEW DN0 to 400 ( 3 /8 to 6 in. NB) Terminal box material Polycarbonate Cable gland material Plastic, brass Paint specification Paint coat 70 µm thick RL 9002 (light grey) DS/WM EN Rev. Q 9

10 Specification transmitter Functional specification Power supply Mains Low voltage DC 85 to 265 V <7 V 24 V C +0 % / 30 %@<7V 24 V ±30 <0.4 Supply voltage fluctuations within the specified range have no effect on accuracy Digital Outputs (3) Rating m, open collector, galvanically isolated * Maximum output frequency 5250 Hz off dedicated to larm / Logic, programmable function 2 off configurable to either Pulse / Frequency or larm/logic function Current output HRT FEX00 variant 4 to 20 m or 4 to 2/20 m, galvanically isolated * Maximum loop resistance 750 HRT protocol Version 5.7 (HRT registered) Signal levels compliant with NMUR NE 43 (3.8 to 20.5 m) Low alarm 3.6 m, High alarm 2.8 m dditional accuracy ±0. % of reading Temperature coefficient: typically <±20 ppm/ C RS485 Communications PROFIBUS FEX00-DP variant Registered name: FEX00-DP RS485 (9.6kbps to.5mbps), galvanically isolated DPV0, DPV P Profile 3.0 Standard idents: 9700, 9740, 974 FEX00-DP specific ident: Concurrent MS2 master connections RS485 Communications MODBUS FEX00-MB variant MODBUS RTU protocol RS485 (9.6kbps to 5.2kbps), galvanically isolated Electrical connections 20 mm glands /2 in. NPT, 20 mm armored glands Temperature limitations mbient temperature Temperature coefficient 20 to 60 C ( 4 to 40 F) Typically <±0 ppm/ Vel 0.5 mls Environmental protection Humidity: 0 to 00 % Rating: IP67 (NEM 4X) to m (3.3 ft.) depth Tamper-proof security Write access prevented by internal switch combined with external security seals for MID applications Languages English, French, German, Italian, Spanish, Polish Infrared service port USB adapter (accessory), USB.. and 2.0 compatible Driver software for Windows 2000, XP, 7 (32-bit) and Vista Housing material Powder-coated aluminium with glass window Paint specification Paint coat 70 µm thick RL 9002 (light grey) Transmitter vibration testing Vibration level: 7 m/s 2 Frequency range: 20 to 50 Hz No. of sweeps in 3 orthogonal planes: 20 Undetectable shift in transmitter span or zero performance Hazardous approvals (HRT variant only) FM & FMc Class Div 2 (FM listing NI //2/BCD/T4,S/II,III/2/FG/T4, Ta=60C; Type 4X, IP67 for transmitter and integral mounting Ta=70C, Type 6P, IP68 for remote sensor type, IP67 on DN0 to 32 [ 3 /8 to /4 in.nb]) (FMc listing NI //2/BCD/T4,DIP/II,III/2/FG/T4, Ta=60C; Type 4X, IP67 for transmitter and integral mounting Ta=70C, Type 6P, IP68 for remote sensor type, IP67 on DN0 to 32 [ 3 /8 to /4 in.nb]) FET, FEV, FEW and FEF DN700 to 2200 (27/28* to 84 in. NB) only *Size is dependent on flange specification TEX* Zone 2, 2 & 22 II3GExnIICT5Gc II 2 D Ex tb IIIC T00 C Db T = 20 C to +60 C (integral transmitter) T = 20 C to +70 C (remote sensor) IECEx* Zone 2, 2 & 22 Ex tb IIIC T00 C Db Ex n IIC T5 Gc T = 20 C to +60 C (integral transmitter) T = 20 C to +70 C (remote sensor) *FEW, FEV, FET and FEF 700 (27/28 in. NB) only Declaration of Conformance Copies of CE certification will be available on request. WaterMaster has OIML R49 Certificate of Conformity to accuracy class and 2 (FEV DN40 to 200 [ /2 to 8 in.nb]). Copies of accuracy certification are available on request. WaterMaster (FEV DN40 to 200 [ /2 to 8 in.nb]) has been type examined under directive MID 2004/22/EC, nnex MI-00. Copies of this certificate are available on request. * When installed, do not leave galvanically isolated circuits (pulse and current) floating. 0 DS/WM EN Rev. Q

11 Transmitter connections Transmitter terminal connections overview This section is intended to give an overview of installation of a flowmeter. For Installation requirements, technical information and Health and safety precautions refer to the User Guide OI/FET00 EN. Test Points for Output Connections C / DC Power Supply Terminal Sensor Cable Terminal Backplane Output Connections Terminal Internal Earth (lternative PE) Internal Earth (lternative PE) Power Cable Output Connections External Earth Output Connections Sensor Cable Cable gland / conduit entry (Remote transmitter shown) Sensor cable terminal connections and recommended cable lengths Cut cables to 70 mm (2.75 in.) Cut cables to 60 mm (2.35 in.) M Brown M2 Red D/TFE Orange SCR Screen D2 Yellow 3 Green (Sleeve) S2 Blue (Screen) E2 Blue (*Signal) E Violet (*Signal) S Violet Screen) **Drain Wire (Twisted with screen from D/TFE Orange and D2 Yellow) See above for cable preparation requirements before connecting cable *Inner wire **For cathodically-protected systems (or if the transmitter enclosure does not have an earth screw) connect the drain wire to terminal SCR. Sensor cable connections at transmitter terminal block remote transmitter DS/WM EN Rev. Q

12 Power supply connections C power supply Power Supply Indicator LED *C Fuse F 250 m Type T (see table below for suppliers) Internal Earth Screws** Brown Blue Green / Yellow C power via a suitable isolator and fuse External Earth Screw >4 mm 2 (<0 WG) Copper Wire **Can be used as a Protective Earth (PE) if required by national standards *Fuse Supplier BB Bussmann Wickmann Fuse Part Number B204 BK/ETF 250 m 9372 K250m Transmitter Label C power supply connections DC (and low voltage C) power supply Power Supply Indicator LED *DC Fuse F2 2TypeT (see table below for suppliers) Internal Earth Screws Red Black Green / Yellow External Earth *Fuse Supplier BB Bussmann Wickmann Fuse Part Number B2042 BK/ETF K2 >4 mm 2 (<0 WG) Copper Wire DC (or Low Voltage C) power via suitable Isolator and fuse Transmitter Label (DC) DC (and low voltage C) power supply connections 2 DS/WM EN Rev. Q

13 Configuration DIP switches Three configuration DIP switches are mounted on the transmitter backplane board. These are factory-set as follows: Remote transmitter all OFF Integral transmitter SW3 ON For MID-compliant flowmeters the read-only / MID protection switch is set to 'ON' to ensure the meter is secure from tampering. For HRT software versions prior to 0.02.XX, this switch (set after commissioning) prevents login via the keypad or bus at any security level. From HRT software version 0.03.XX onwards and for all PROFIBUS software versions, on MID meters, all metrological-related parameters are locked and inaccessible at the Service level. Standard and dvanced user level parameters can still be modified via the HMI or bus. Output connections Frequency outputs Terminal connection IDs are HRT- / PROFIBUS-variant dependent PLC / Datalogger connections PLC or Datalogger XX XX XX XX COM DO DO2 Note. Digital outputs DO and DO2 are polarity sensitive. The common (negative) connection for these outputs is designated 'COM'. Configuration DIP Switches OFF Forward Flow Output (DO) Counter / Totalizer DC Supply DIP Switch Functions SW Read-only / MID Protection SW2 (Future Product) SW3 Internal Sensor Memory ON SW3 SW2 SW XX XX XX XX COM DO DO2 and/or Reverse Flow Output (DO2) Counter / Totalizer Transmitter module identification Electromechanical connections Note. The communications bus type is HRT FEX00 if not specified on the transmitter module label. n example of the PROFIBUS FEX00-DP variant transmitter module label is shown below. XX XX XX XX COM DO DO2 Forward Flow Output (DO) Counter / Totalizer and/or Reverse Flow Output (DO2) Counter / Totalizer PROFIBUS FEX-00P Label Red Label on DC (and Low Voltage C) Converter Module Telemetry / Electronic counters connections Transmitter module identification Black Label on C Converter Module DS/WM EN Rev. Q 3

14 larm outputs PLC interface 24 V Terminal connection IDs are HRT- / PROFIBUS- / MODBUSvariant dependent COM DO3 XX XX XX XX COM DO DO2 Typically k W Fwd + Rev + PLC + DC Supply Com larm Bell XX XX XX XX DC Supply COM DO DO2 DO3 and/or Horn XX XX XX XX DC Supply larm 2 COM DO DO2 Note. Normal alarm / logic output is from DO3 (terminal 6). DO (4) and DO2 (5) can also be configured as alarms if required but are then NOT available as frequency / pulse outputs as shown in Electromechanical connections and Telemetry / Electronic counters connections, opposite. Bell and horn shown for example only. ny suitable alarm device may be used (for example, lamp, siren, buzzer etc.). PLC Fwd Rev Com Note. WaterMaster digital outputs are NPN optocoupled transistors used as switches. Maximum allowed voltage at collector is 30 V DC Maximum allowed current across transistor is 220 m. Timer Switch larm DC Supply XX XX XX XX COM DO DO2 R Relay larm 2 + and/or Note. Relay and timer switch shown for example only. 4 DS/WM EN Rev. Q

15 Current output (4 to 20 ma) HRT (FEX00) variant + Refer to IM/WMP for HRT-Protocol communication details Current output (4 to 20 m) HRT (FEX00) variant RS485 communications PROFIBUS (FEX00-DP) and MODBUS (FEX00-MB) variants PROFIBUS / MODBUS RS485 /B In 2/B2 Out Digital communication The transmitter has the following options for digital communication. HRT protocol The unit is registered with HRT Communication Foundation. HRT Connections at Terminal Block 4 m Current Output (Multidrop Connection) 4 to 20 m Current Output (Single Connection) see User Guide IM/WMP 250 Minimum Load Multidrop Connection Single Connection Screen Clamp Test point access PC connection (USB or RS232) HRT FSK-Modem or Handheld Terminal Sensor Note. typical DVM probe can access (fit) the PCB's test holes. HRT protocol 4to20m IC+* IC * Not Used 3 32 XX VR Frequency Outputs COM O/P2 O/P3 larm Output Not Used O/P Configuration Transmission Max. signal amplitude Current output load Cable Max. cable length Directly on the Device Software sset Vision Basic (+ HRT -DTM) Install a HRT modem (FSK [Frequency Shift Keyed]-Modem) for HRT-Communication when connecting to a PC. The HRT-Modem converts the analog 4 to 20 m signal into a digital output signal (Bell Standard 202) and connects to the PC using a USB (or RS232C) connector.2 m Min. 250, max. = 560 WG 24 twisted 500 m (492 ft.) *These 2 test points are connected on the HRT FEX00 backplane only (they are present on the PROFIBUS FEX00-DP / MODBUS FEX00-MB backplane but not connected) Baud rate.200 baud System integration WaterMaster can be integrated into control systems and configuration devices using any Frame application, such as BB ssetvision or similar third-party applications. BB Device Type Managers (DTMs) for WaterMaster provide a unified structure for accessing device parameters, configuring and operating the devices and diagnosing problems. FDT (Field Device Tool) technology standardizes the communication and configuration interface between all field devices and host systems. DS/WM EN Rev. Q 5

16 PROFIBUS DP protocol PROFIBUS is a manufacturer-independent, open Fieldbus standard for a wide range of applications in manufacturing, process and building automation. Manufacturer independence and openness are ensured by the international standard EN PROFIBUS DP ID no. lternative standard ID no. Configuration 0x343 0x970 or 0x974 Directly on the device Software sset Vision Basic (+PROFIBUS DP-DTM) Transmission signal ccuracy to IEC Cable ll devices are connected in a bus structure ('line') as shown in below. Up to 32 stations (master or slaves) can be linked to create one 'segment', although it is recommended not to install more than 6 devices on a single segment. Each end of a segment must be terminated by an active bus terminating resistor. Both bus terminators must always be powered to ensure fault-free operation, therefore it is strongly recommended that they are connected to a back-up power supply. The use of bus amplifiers (repeaters) and segment couplers can be used to extend the network. Operational Level Engineer Shielded, twisted cable (accurate to IEC 658-2, types or B) Operate System integration The GSD file for WaterMasters specifies the device-specific Ident No It conforms to the PROFIBUS standard, providing a clear and comprehensive description of each instrument in a precisely defined format. This enables the system configuration tool to use the information automatically when configuring a PROFIBUS bus system. The BB GSD file (Ident No. 343) is divided into 2 sections: General specifications Identification of the device, together with hardware and software versions, baud rates supported and the possible time intervals for monitoring times. DP slave-related specifications Information about the user parameter block for device-specific configuration and modules containing details of the input and output data that can be exchanged cyclically with a PROFIBUS master. The WaterMaster GSD file (BB_343.gsd) is available for download from the BB website at: (follow the link for PROFIBUS DP field devices). MODBUS protocol MODBUS is an open standard that is owned and administered by an independent group of device manufacturers called the Modbus Organization ( Using the MODBUS protocol, devices from different manufacturers exchange information on the same communications bus without the need for special interface equipment. WaterMaster FEX00-MB follows the specification for Modbus Over Serial Line V.02, using 2-wire TI/EI-485 (RS485) physical layer. Master Level Slave Level DP / P Link PROFIBUS-P WaterMaster FEX00-DP Control PROFIBUS-DP Line Terminator Balanced Pair D D0 Master D R Common Line 5 Pull Up Pull Down D R D R Slave Slave n Up to 3 slaves For example, WaterMaster FEX00 MOD 6 DS/WM EN Rev. Q

17 Cable Properties The end-to-end length of the trunk cable must be limited. The maximum length depends on the Baud rate, the cable (gauge, capacitance or characteristic impedance), the number of loads on the daisy chain and the network configuration (2-wire or 4-wire). For 9600 Baud rate and WG26 (or wider) gauge, the maximum length is 000 m (3280 ft.). Where 4-wire cabling is used as a 2-wire cabling system the maximum length must be divided by 2. The tap cables must be short, never more than 20 m (65.6 ft.). If a multi-port tap is used with n derivations, each one must have a maximum length of 40 m (3 ft.) divided by n. The maximum serial data transmission line length for RS485 systems is 200 m (3937 ft.). The lengths of cable that can be used are determined by the cable type, typically: Up to 6 m (9.7 ft.) standard screened or twisted pair cable. Up to 300 m (984 ft.) twin twisted pair with overall foil screen and an integral drain wire for example, Belden 9502 or equivalent. Up to 200 m (3937 ft.) twin twisted pair with separate foil screens and integral drain wires for example, Belden 9729 or equivalent. Grounding The flowmeter sensor must be cross-bonded to the upstream and downstream pipes and fluid. For technical reasons, this potential should be identical to the potential of the metering fluid. For plastic or insulated lined pipelines, the fluid is grounded by installing a minimum of earthing rings. When there are stray potentials present in the pipeline, an earthing ring is recommended on both ends of the meter sensor. Fluid contact rings Mounting The installation conditions shown below must be observed to achieve the best operational results. The sensor tube must always be completely full. Category 5 cables may be used for RS485-MODBUS to a maximum length of 600 m (968 ft.). For the balanced pairs used in an RS485-system, a characteristic impedance with value higher than 00 is preferred especially for 9200 and higher Baud rates. Installation requirements This section is intended to give an overview of installation of a flowmeter. For Installation requirements, technical information and Health and Safety precautions refer to User Guide OI/FEF/FEV/FEW EN. Unpacking the flowmeter Care must be taken when lifting the flowmeter to use the lifting hooks provided or sling under the body of the meter. Never lift using the terminal connection box of the sensor cable as this will cause damage and invalidate warranty. The flow direction must correspond to the identification plate. The device measures the flowrate in both directions. Forward flow is the factory setting. The devices must be installed without mechanical tension (torsion, bending). If required support the pipeline. Supports Sling ngle <90 DS/WM EN Rev. Q 7

18 The flange seals must be made from a compatible material for the fluid and fluid temperatures if required. 70 / 30 C (58 / 266 F) Max. The cable to the flowmeter should be installed neatly or within a conduit, both loose or conduit should have a u shape below the terminal connection box height to allow any water run off to avoid any capillary action into the flowmeter sensor. 20 C ( 4 F) Min. Seals must not extend into the flow area since possible turbulence could influence the device accuracy. Electrode axis Electrode axis should be horizontal if at all possible or no more than 45 from horizontal. 45 Max. Fit Gaskets Gaskets Same Size as Pipe The pipeline may not exert any unallowable forces and torques on the device, such as vibration. The flowmeter must not be submitted to any localized heat during installation; take care to remember this is a measuring instrument. Up and Down stream pipe sections The metering principle is tolerant of the flow profile. Wherever possible do not install fittings (for example, manifolds, valves) directly in front of the flowmeter sensor. Butterfly valves should be installed so that the valve plate does not extend into the flowmeter sensor. Valves or other turn-off components should be installed in the Downstream pipe section. Experience has shown that, in most installations, straight upstream sections 3 x DN long and straight downstream sections 2 x DN long are normally sufficient. We would recommend conditions of 5 x DN straight upstream and 2 x DN straight downstream where possible. For reduced-bore meters (FER), these straight pipe sections are often not necessary. The flowmeter must not be exposed to direct sunlight or provide for appropriate sun protection where necessary. 5xDN 0xDN 2xDN (FEW, FEF and FEV) 0 x DN (FER) 8 DS/WM EN Rev. Q

19 Transmitter dimensions Integral transmitter 98 (3.8) 202 (8.0) Remote transmitter 98 (3.8) R3.2 (0.2) 200 (7.9) 79 (7.0) 205 (8.0) 8 (4.6) 7 (2.8) Sensor dimensions FEW DN0 to 25 ( 3 /8 to 5 in. NB) 77.8 (3.06) 04.5 (4.) 98 (3.86) 89 (3.5) 20 (7.9) Ø04 (4.) G E F 78 (3.) D C L DN0 to 25 ( 3 /8 to 5 in. NB) (FEW) pprox. weight in kg (lb) DN Process connection type D L F C E G Integral Remote DN0 JIS0K 90 (3.54) 200 (7.87) 268 (0.55) 82 (3.23) 93 (7.6) 48 (5.83) 3 (4.45) 6 (3) 4 (9) ( 3 /8 in.) PN0 to (3.54) SME B6.5 CL50 90 (3.54) SME B6.5 CL (3.78) DN5 PN0 to (3.74) ( /2 in.) JIS5K 80 (3.5) JIS0K 95 (3.74) SME B6.5 CL (3.74) SME B6.5 CL50 90 (3.54) DN20 PN0 to (4.3) 8 (8) 6 (3) ( 3 /4 in.) JIS5K 85 (3.35) JIS0K 00 (3.94) SME B6.5 CL300 5 (4.53) SME B6.5 CL50 98 (3.86) DN0 to 25 ( 3 /8 to 5 in. NB) (FEW) dimensions / weights DS/WM EN Rev. Q 9

20 pprox. weight in kg (lb) DN Process connection type D L F C E G Integral Remote DN25 PN0 to 40 5 (4.53) 200 (7.87) 268 (0.55) 82 (3.23) 93 (7.6) 48 (5.83) 3 (4.45) 9 (20) 7 (5) ( in.) JIS5K 95 (3.74) JIS0K 25 (4.88) SME B6.5 CL (4.88) SME B6.5 CL50 08 (4.25) DN32 PN0 to (5.5) 275 (0.83) 92 (3.62) 200 (7.87) 55 (6.0) 3 (4.45) 0 (22) 8 (8) ( /4 in.) JIS5K 5 (4.53) JIS0K 35 (5.3) SME B6.5 CL (5.3) SME B6.5 CL50 7 (4.6) DN40 PN0 to (5.9) (24) 9 (20) ( /2 in.) JIS5K 20 (4.72) JIS0K 40 (5.5) SME B6.5 CL (6.0) SME B6.5 CL50 27 (5.00) DN50 PN0 to (6.5) 28 (.06) 97 (3.82) 206 (8.) 6 (6.34) 5 (4.53) 2 (26) 0 (22) (2 in.) JIS5K 30 (5.2) JIS0K 55 (6.0) S4087 PN6 50 (5.9) S4087 PN35 65 (6.50) SME B6.5 CL50 52 (5.98) SME B6.5 CL (6.50) DN65 PN0 to (7.28) 292 (.50) 08 (4.25) 27 (8.54) 72 (6.77) 04 (4.09) 3 (29) (24) (2 /2 in.) JIS5K 55 (6.0) JIS0K 75 (6.89) S4087 PN6 65 (6.50) S4087 PN35 85 (7.28) SME B6.5 CL50 78 (7.0) SME B6.5 CL (7.48) 5 (33) 3 (29) DN80 PN0 to (7.87) 292 (.5) 08 (4.25) 27 (8.54) 72 (6.77) 04 (4.09) 7 (37) 5 (33) (3 in.) JIS5K 80 (7.09) JIS0K 85 (7.28) S4087 PN6 85 (7.28) S4087 PN (8.07) SME B6.5 CL50 90 (7.48) SME B6.5 CL (8.28) 9 (42) 7 (37) DN00 PN0 to (8.66) 250 (9.84) 34 (2.36) 22 (4.8) 239 (9.4) 94 (7.64) 25 (4.92) 9 (42) 7 (37) (4 in.) PN25 to (9.25) 23 (5) 2 (46) JIS5K 200 (7.87) 9 (42) 7 (37) JIS0K 20 (8.27) S4087 PN6 25 (8.46) S4087 PN (9.06) 23 (5) 2 (46) SME B6.5 CL (.04) 30 (66) 28 (62) SME B6.5 CL (9.00) 2 (5) 9 (42) DN25 PN0 to (9.84) 324 (2.76) 30 (5.2) 249 (9.8) 204 (8.03) 25 (4.92) 22 (48) 20 (44) (5 in.) PN25 to (0.63) 29 (64) 27 (59) JIS5K 235 (9.25) 22 (48) 20 (44) JIS0K 250 (9.84) SME B6.5 CL (0.00) SME B6.5 CL (.02) 35 (77) 33 (73) DN0 to 25 ( 3 /8 to 5 in. NB) (FEW) dimensions / weights (Continued) 20 DS/WM EN Rev. Q

21 FEW DN50 to 400 (6 to 6 in. NB) 04.5 (4.) 98 (3.86) 77.8 (3.06) Ø04 (4.) 89 (3.5) 20 (7.9) 78 (3.) G E F D C L DN50 to 400 (6 to 6 in. NB) (FEW) pprox. weight in kg (lb) DN Process connection type D L F C E G Integral Remote DN50 PN0 to (.22) 300 (.8) 37 (4.6) 46 (9.88) 296 (.65) 25 (9.88) 66 (6.54) 33 (73) 3 (68) (6 in.) PN25 to (.8) 39 (86) 37 (8) JIS5K 265 (0.43) 33 (73) 3 (68) JIS0K 280 (.02) S4087 PN6 280 (.02) S4087 PN (.8) 39 (86) 37 (8) SME B6.5 CL (2.60) 47 (03) 45 (99) SME B6.5 CL (0.98) 33 (73) 3 (68) DN200 PN0 340 (3.39) 350 (3.78) 4 (6.8) 70 (6.69) 336 (3.23) 29 (.46) 200 (7.87) 4 (90) 39 (86) (8 in.) PN6 340 (3.39) PN (4.7) 55 (2) 53 (7) PN (4.76) 65 (43) 63 (39) S4087 PN6 335 (3.9) 4 (90) 39 (86) S4087 PN (4.57) 65 (43) 63 (39) JIS5K 320 (2.60) 4 (90) 39 (86) JIS0K 330 (2.99) SME B6.5 CL (4.96) 72 (58) 70 (54) SME B6.5 CL (3.58) 50 (0) 48 (06) DN250 PN0 395 (5.55) 450 (7.72) 426 (6.77) 98 (7.80) 35 (3.82) 306 (2.05) 235 (9.62) 6 (34) 59 (30) (0 in.) PN6 405 (5.94) 65 (43) 63 (39) PN (6.73) 84 (85) 82 (80) PN (7.72) 95 (209) 93 (205) S4087 PN6 405 (5.94) 65 (43) 63 (39) S4087 PN (6.93) 95 (209) 93 (205) JIS5K 385 (5.6) 65 (43) 63 (39) JIS0K 400 (5.75) SME B6.5 CL (7.52) 05 (23) 03 (227) SME B6.5 CL (5.94) 70 (54) 68 (50) DN50 to 400 (6 to 5 in. NB) (FEW) dimensions / weights DS/WM EN Rev. Q 2

22 pprox. weight in kg (lb) DN Process connection type D L F C E G Integral Remote DN300 PN0 445 (7.52) 500 (9.69) 449 (7.68) 449 (7.68) 449 (7.68) 449 (7.68) 449 (7.68) 74 (63) 72 (58) (2 in.) PN6 460 (8.) 80 (76) 78 (72) PN (9.09) 00 (220) 98 (26) JIS5K 430 (6.93) 80 (76) 78 (72) JIS0K 445 (7.52) S4087 PN6 455 (7.9) S4087 PN (9.29) 30 (286) 28 (282) SME B6.5 CL (20.47) 50 (330) 48 (326) SME B6.5 CL (9.09) 05 (23) 03 (227) PN40 55 (20.28) 600 (23.62) 30 (286) 28 (282) DN350 PN0 505 (9.88) 550 (2.65) 464 (8.27) 265 (0.43) 389 (5.3) 344 (3.54) 322 (2.68) 95 (209) 93 (205) (4 in.) PN6 520 (20.47) 0 (242) 08 (238) PN (2.85) 45 (39) 43 (35) JIS5K 480 (8.90) 95 (209) 93 (205) JIS0K 490 (9.29) S4087 PN6 525 (20.67) 30 (286) 28 (282) S4087 PN (2.65) 85 (407) 83 (403) SME B6.5 CL (23.03) 40 (308) 38 (304) SME B6.5 CL (2.06) 05 (23) 03 (227) PN (22.83) 650 (25.59) 95 (429) 93 (425) DN400 PN0 565 (22.24) 600 (23.62) 506 (9.92) 265 (0.43) 43 (6.97) 386 (5.20) 322 (2.68) 03 (227) 0 (222) (6 in.) PN6 580 (22.83) 26 (277) 24 (273) PN (24.4) 70 (374) 68 (370) JIS5K 540 (2.26) 03 (227) 0 (223) JIS0K 560 (22.05) 6 (255) 4 (25) S4087 PN6 580 (22.83) 54 (339) 52 (335) S4087 PN35 60 (24.02) 302 (664) 300 (660) SME B6.5 CL (25.59) 265 (583) 263 (578) SME B6.5 CL (23.62) 75 (385) 73 (38) PN (25.98) 650 (25.59) 258 (568) 256 (564) DN50 to 400 (6 to 5 in. NB) (FEW) dimensions / weights (Continued) 22 DS/WM EN Rev. Q

23 FEW DN450 to 2400 (8 to 96 in. NB) 89 (3.5) 77.8 (3.06) 04 (4.) (4.) (3.86) 20 (7.9) 78 (3.) G E F D C L DN450 to 2400 (8 to 96 in. NB) (FEW) pprox. weight in kg (lb) DN Process connection type D L F C E G Integral Remote DN450 PN0 65 (24.2) 600 (23.62) 54 (20.24) 30 (2.20) 439 (7.28) 394 (5.5) 328 (2.9) 73 (38) 7 (377) (8 in.) PN6 640 (25.20) 88 (44) 86 (40) JIS5K 605 (23.82) 65 (364) 63 (359) JIS0K 620 (24.4) 77 (390) 75 (386) S4087 PN6 640 (25.20) 232 (5) 230 (507) S4087 PN (26.57) 328 (723) 326 (78) SME B6.5 CL (27.95) 368 (8) 366 (807) SME B6.5 CL (25.00) 250 (55) 248 (547) PN (26.38) 686 (27.0) 245 (540) 243 (536) PN (26.97) 35 (694) 33 (690) DN500 PN0 670 (26.38) 600 (23.62) 54 (20.24) 30 (2.20) 439 (7.28) 394 (5.5) 367 (4.45) 90 (48) 88 (43) (20 in.) PN6 75 (28.5) 240 (528) 238 (524) JIS5K 655 (25.79) 90 (48) 88 (43) JIS0K 675 (26.57) S4087 PN6 705 (27.76) 290 (638) 288 (634) S4087 PN (28.94) 435 (957) 433 (953) SME B6.5 CL (27.56) 300 (660) 298 (656) SME B6.5 CL (30.5) 762 (30.00) 490 (080) 488 (076) PN (28.74) 700 (27.56) 300 (66) 298 (657) PN (29.72) 762 (30.00) 392 (864) 390 (860) DN600 PN0 780 (30.7) 800 (3.50) 565 (22.24) 36 (4.2) 490 (9.29) 445 (7.52) 469 (8.46) 284 (626) 282 (622) (24 in.) PN6 840 (33.07) 38 (700) 36 (695) PN (33.27) 460 (02) 458 (008) JIS5K 770 (30.3) 275 (605) 273 (600) JIS0K 795 (3.30) 306 (673) 304 (668) S4087 PN6 825 (32.48) 382 (840) 380 (835) S4087 PN (33.46) 452 (994) 450 (990) SME B6.5 CL (36.02) 550 (20) 548 (205) SME B6.5 CL50 85 (32.09) 425 (935) 423 (930) PN (35.04) 890 (35.04) 600 (320) 598 (36) DN450 to 2400 (8 to 96 in. NB) (FEW) dimensions / weights DS/WM EN Rev. Q 23

24 pprox. weight in kg (lb) DN Process connection type D L F C E G Integral Remote DN700 JIS 5K 875 (34.45) 90 (35.83) 604 (23.77) 403 (5.87) 528 (20.79) 488 (9.2) 444 (7.48) 26 (475) 24 (47) (28 in.) JIS 0K 905 (35.63) 282 (620) 280 (66) PN6 860 (33.86) 225 (495) 223 (49) PN0 895 (35.24) 303 (667) 30 (662) PN6 90 (35.83) 337 (74) 335 (737) WW C207 CLSS B 927 (36.50) 249 (548) 247 (543) WW C207 CLSS D 927 (36.50) 280 (66) 278 (62) S4087 PN6 90 (35.83) 359 (790) 357 (785) S229 TBLE-D 90 (35.83) 263 (579) 26 (574) S229 TBLE-E 90 (35.83) 337 (74) 335 (737) PN (37.80) 47 (0.36) 469 (032) PN (39.7) 586 (289) 584 (285) WW C207 CLSS E 927 (36.50) 472 (038) 470 (034) WW C207 CLSS F 035 (40.75) 75 (573) 73 (569) S4087 PN (36.80) 539 (86) 537 (8) SME CL50 SERIES 925 (36.42) 503 (07) 50 (02) SME CL50 SERIES B 835 (32.87) 323 (7) 32 (706) SME CL300 SERIES B 920 (36.22) 63 (388) 629 (384) DN750 JIS 5K 945 (37.20) 990 (38.98) 630 (24.79) 429 (6.89) 554 (2.8) 54 (20.23) 444 (7.48) 25 (552) 249 (548) (30 in.) JIS 0K 970 (38.9) 327 (79) 325 (75) WW C207 CLSS B 984 (38.74) 273 (60) 27 (596) WW C207 CLSS D 984 (38.74) 344 (757) 342 (752) S4087 PN6 995 (39.7) 467 (027) 465 (023) S229 TBLE-D 995 (39.7) 340 (748) 338 (744) S229 TBLE-E 995 (39.7) 454 (999) 452 (994) WW C207 CLSS E 984 (38.74) 496 (09) 494 (087) WW C207 CLSS F 092 (43.99) 790 (738) 788 (734) S4087 PN35 05 (39.96) 663 (459) 66 (454) SME CL50 SERIES 985 (38.78) 544 (97) 542 (92) SME CL50 SERIES B 885 (34.84) 320 (704) 38 (700) SME CL300 SERIES B 990 (38.98) 748 (646) 746 (64) DN800 JIS 5K 995 (39.7) 040 (40.04) 654 (25.74) 453 (7.83) 578 (22.76) 538 (2.8) 542 (2.34) 280 (66) 278 (62) (32 in.) JIS 0K 020 (40.6) 364 (80) 362 (796) PN6 975 (38.39) 294 (647) 292 (642) PN0 05 (39.96) 406 (893) 404 (889) PN6 025 (40.35) 469 (032) 467 (027) WW C207 CLSS B 060 (4.73) 328 (722) 326 (77) WW C207 CLSS D 060 (4.73) 408 (898) 406 (893) S4087 PN6 060 (4.73) 530 (66) 528 (62) S229 TBLE-D 060 (4.73) 386 (849) 384 (845) S229 TBLE-E 060 (4.73) 59 (42) 57 (37) PN (42.72) 65 (353) 63 (349) PN40 40 (44.88) 866 (905) 864 (90) WW C207 CLSS E 060 (4.73) 634 (395) 632 (390) WW C207 CLSS F 50 (45.28) 897 (973) 895 (969) S4087 PN (4.73) 75 (652) 749 (648) SME CL50 SERIES 060 (4.73) 700 (540) 698 (536) SME CL50 SERIES B 940 (37.0) 406 (893) 404 (889) SME CL300 SERIES B 055 (4.54) 933 (2053) 93 (2048 DN900 (36 in.) JIS 5K 095 (43.) 70 (46.06) 705 (27.7() 504 (9.84) 629 (24.76) 589 (23.9) 570 (22.44) ) 367 (807) JIS 0K 20 (44.09) 445 (979) 443 (975) PN6 075 (42.32) 390 (858) 388 (854) PN0 5 (43.90) 502 (04) 500 (00) PN6 25 (44.29) 589 (296) 587 (29) WW C207 CLSS B 68 (45.98) 47 (97) 45 (93) WW C207 CLSS D 68 (45.98) 493 (085) 49 (080) WW C207 CLSS E 68 (45.98) 827 (89) 825 (85) WW C207 CLSS F 270 (50.00) 50 (2530) 48 (2526) S4087 PN6 75 (46.26) 706 (553) 704 (549) S229 TBLE-D 75 (46.26) 54 (3) 52 (26) S229 TBLE-E 75 (46.26) 694 (527) 692 (522) PN25 85 (46.65) 89 (802) 87 (797) PN (49.2) 58 (2548) 56 (2543) S4087 PN35 85 (46.65) 044 (2297) 042 (2292) SME CL50 SERIES 70 (46.06) 96 (24) 959 (20) SME CL50 SERIES B 055 (4.54) 595 (309) 593 (305) SME CL300 SERIES B 70 (46.06) 47 (2523) 45 (259) DN450 to 2400 (8 to 96 in. NB) (FEW) dimensions / weights (Continued) 24 DS/WM EN Rev. Q

25 DN000 (40 in.) DN050 (42 in.) DN00 (44 in.) DN200 (48 in.) pprox. weight in kg (lb) DN Process connection type D L F C E G Integral Remote JIS 5K 95 (47.05) 300 (5.8) 755 (29.7) 554 (2.8) 679 (26.73) 639 (25.6) 624 (24.57) 44 (970) 439 (966) JIS 0K 235 (48.62) 572 (258) 570 (254) PN6 75 (46.26) 466 (025) 464 (02) PN0 230 (48.43) 674 (483) 672 (478) PN6 255 (49.4) 879 (934) 877 (929) WW C207 CLSS B 289 (50.75) 503 (07) 50 (02) WW C207 CLSS D 289 (50.75) 659 (450) 657 (445) WW C207 CLSS E 289 (50.75) 028 (2262) 026 (2257) WW C207 CLSS F 378 (54.25) 367 (3007) 365 (3003) S4087 PN6 255 (49.4) 83 (828) 829 (824) S229 TBLE-D 255 (49.4) 60 (342) 608 (338) S229 TBLE-E 255 (49.4) 833 (833) 83 (028) PN (5.97) 207 (2655) 205 (265) PN (53.54) 43 (309) 4 (304) S4087 PN (50.20) 244 (2737) 242 (2732) SME CL50 SERIES 290 (50.79) 49 (2528) 47 (2523) SME CL300 SERIES 240 (48.82) 349 (2968) 347 (2963) SME CL50 SERIES B 75 (46.26) 738 (624) 736 (69) SME CL300 SERIES B 275 (50.20) 487 (327) 485 (3267) WW C207 CLSS B 346 (5299) 365 (53.74) 808 (3.82) 608 (23.92) 733 (28.84) 693 (27.28) 624 (24.57) 564 (24) 562 (236) WW C207 CLSS D 346 (5299) 669 (472) 667 (467) WW C207 CLSS E 346 (5299) 43 (255) 4 (250) WW C207 CLSS F 448 (57.0) 568 (3450) 566 (3445) SME CL50 SERIES B 225 (48.23) 809 (780) 807 (775) SME CL50 SERIES 345 (52.95) 289 (2836) 287 (283) SME CL300 SERIES 290 (50.79) 527 (3359) 525 (3355) SME CL300 SERIES B 335 (52.56) 704 (3749) 702 (3744) JIS 5K 305 (5.38) 430 (56.30) 50 (22) 508 (8) JIS 0K 345 (52.95) 689 (56) 687 (5) WW C207 CLSS B 403 (55.24) 65 (353) 63 (349) WW C207 CLSS D 403 (55.24) 807 (775) 805 (77) WW C207 CLSS E 404 (55.26) 205 (265) 203 (2647) WW C207 CLSS F 505 (59.25) 79 (3782) 77 (3777) JIS 5K 420 (55.9) 560 (6.42) 860 (33.85) 659 (25.94) 784 (30.87) 744 (29.29) 802 (3.57) 65 (432) 649 (428) JIS 0K 465 (57.68) 967 (227) 965 (223) PN6 405 (55.3) 70 (562) 708 (558) PN0 455 (57.28) 07 (2435) 05 (243) PN6 485 (58.46) 363 (2999) 36 (2994) WW C207 CLSS B 5 (59.49) 772 (698) 770 (694) WW C207 CLSS D 5 (59.49) 999 (298) 997 (293) WW C207 CLSS E 5 (59.49) 458 (3208) 456 (3203) WW C207 CLSS F 65 (65.00) 2400 (5280) 2398 (5276) S4087 PN6 490 (58.66) 253 (2757) 25 (2752) S229 TBLE-D 490 (58.66) 023 (225) 02 (2246) S229 TBLE-E 490 (58.66) 272 (2798) 270 (2794) PN (60.24) 559 (3430) 557 (3425) PN (62.0) 233 (4693) 23 (4688) S4087 PN (60.24) 25 (4653) 23 (4649) SME CL50 SERIES 50 (59.45) 707 (3755) 705 (375) SME CL300 SERIES 465 (57.68) 263 (4759) 26 (4754) SME CL50 SERIES B 390 (54.72) 085 (2387) 083 (2383) SME CL300 SERIES B 50 (59.45) 2352 (574) 2350 (570) DN450 to 2400 (8 to 96 in. NB) (FEW) dimensions / weights (Continued) DS/WM EN Rev. Q 25

26 pprox. weight in kg (lb) DN Process connection type D L F C E G Integral Remote DN350 WW C207 CLSS B 683 (66.26) 755 (69.09) 955 (37.59) 754 (29.69) 879 (34.6) 839 (33.03) 902 ( (258) 979 (254) (54 in.) WW C207 CLSS D 683 (66.26) 23 (2669) 2 (2664) WW C207 CLSS E 683 (66.26) 942 (4272) 940 (4268) DN400 PN6 630 (64.7) 820 (7.65) 085 (2387) 083 (2383) (56 in.) PN0 675 (65.94) 73 (3808) 729 (3804) PN6 685 (66.34) 770 (3894) 768 (3890) SME CL50 SERIES B 600 (62.99) 593 (3505) 59 (3500) PN (69.09) 2368 (520) 2366 (5205) PN (70.67) 3086 (6789) 3084 (6785) SME CL50 SERIES 745 (68.70) 2556 (5623) 2554 (569) SME CL300 SERIES 70 (67.32) 3376 (7427) 3374 (7423) SME CL300 SERIES B 765 (69.49) 3758 (8268) 3756 (8263) DN500 JIS 5K 730 (68.) 950 (76.77) 065 (4.92) 864 (34.02) 989 (38.94) 949 (37.36) 90 (35.83) 029 (2264) 027 (2259) (60 in.) JIS 0K 795 (70.67) 504 (3309) 502 (3304) SME CL50 SERIES B 725 (67.9) 203 (4468) 2029 (4464) WW C207 CLSS B 854 (72.99) 229 (2704) 227 (2699) WW C207 CLSS D 854 (72.99) 54 (333) 52 (3326) WW C207 CLSS E 854 (72.99) 2544 (5597) 2542 (5592) SME CL50 SERIES 855 (73.03) 3084 (6785) 3082 (6780) SME CL300 SERIES 80 (7.26) 3875 (8525) 3873 (852) SME CL300 SERIES B 880 ( (998) 479 (994) DN600 PN6 830 (72.05) 2080 (8.89) 066 (4.96) 865 (34.06) 990 (38.98) 950 (37.4) 000 (39.37) 434 (355) 432 (350) (64 in.) PN0 95 (75.39) 2525 (5555) 2523 (555) PN (77.76) 320 (7042) 399 (7038) PN6 930 (75.98) 2768 (6090) 2766 (6085) PN (79.72) 4375 (9625) 4373 (962) DN650 WW C207 CLSS B 2032 (80.00) 245 (84.45) 6 (43.94) 95 (36.02) 040 (40.94) 000 (39.37) 000 (39.37) 504 (3309) 502 (3304) (66 in.) WW C207 CLSS D 2032 (80.00) 2025 (4455) 2023 (445) DN800 PN (80.5) 2340 (92.3) 8 (46.50) 980 (38.58) 05 (43.50) 065 (4.93) 00 (43.3) 853 (4077) 85 (4072) (72 in.) PN0 25 (83.27) 380 (6996) 378 (6992) PN6 230 (83.86) 3657 (8045) 3655 (804) PN (86.42) 4422 (9728) 4420 (9724) WW C207 CLSS B 297 (86.50) 773 (390) 77 (3896) WW C207 CLSS D 297 (86.50) 2387 (525) 2385 (5247) DN950 WW C207 CLSS B 2362 (92.99) 2535 (99.80) 29 (50.8) 090 (42.9) 25 (47.83) 75 (46.26) 80 (46.46) 2309 (5080) 2307 (5075) (78 in.) WW C207 CLSS D 2362 (92.99) 3037 (668) 3035 (6677) DN2000 PN (89.7) 2600 (02.36) 258 (5678) 2579 (5674) (80 in.) PN (9.54) 4254 (9359) 4252 (9354) PN (92.32) 4556 (0023) 4554 (009) PN (95.47) 5896 (297) 5894 (2967) DN200 WW C207 CLSS B 2534 (99.76) 2730 (07.48) 395 (54.9) 94 (47.0) 39 (5.93) 279 (50.35) 80 (46.46) 264 (580) 2639 (5806) (84 in.) WW C207 CLSS D 2534 (99.76) 3487 (767) 3485 (7667) DN2200 PN (97.44) 2860 (2.60) 330 (52.36) 3363 (7399) 336 (7394) (88 in.) PN (00.39) 5795 (2749) 5793 (2745) DN2400 PN ( (22.83) 495 (58.85) 294 (50.94) 49 (55.87) 379 (54.29) 450 (57.09) 400 (9020) 4098 (906) (96 in.) PN (08.66) 6968 (5330) 6966 (5325) DN450 to 2400 (8 to 96 in. NB) (FEW) dimensions / weights (Continued) 26 DS/WM EN Rev. Q

27 FEV DN40 to 200 ( /2 to 8 in. NB) 77.8 (3.06) 04.5 (4.) 98 (3.86) 89 (3.5) 20 (7.9) Ø04 (4.) G E F 78 (3.) X D C X L DN40 to 200 ( /2 to 8 in. NB) (FEV) pprox. weight in kg (lb) DN Process connection type D L F E G X Integral Remote DN40 ( /2 in.) DN50 (2 in.) DN80 (3 in.) DN00 (4 in.) DN50 (6 in.) DN200 (8 in.) EN092- PN0, 6, 25, (5.9) 90 (7.48) 260 (0.24) 85 (7.28) 37 (5.39) 30 (.8) 2.8 (28.6).8 (25.96) SME B6.5 CLSS 50 S229 TBLE D, E, F EN092- PN0, 6, 25, (6.50) 90.5 (7.5) 26 (0.28) 86 (7.32) 38 (5.43) 38 (.5) 3.75 (30.25) 2.75 (28.05) SME B6.5 CLSS 50 EN092- PN0, 6, 25, (7.87) 90.5 (7.5) 280 (.04) (8.09) 57.5 (6.2) 6 (2.4) 7.2 (37.84) 6.2 (35.64) SME B6.5 CLSS 50 S4087 PN6, 2 S229 TBLE D, E, F EN092- PN0, 6, 25, (8.86) (9.47) (.83) (8.88) 77.5 (6.98) 70 (2.76) 9.3 (42.5) 8.3 (40.3) SME B6.5 CLSS 50 S4087 PN6 EN092- PN0, 6, 25, (.8) (.44) (3.3) (0.8) 20.5 (8.29) 03 (4.06) 35. (77.2) 34. (75) SME B6.5 CLSS 50 S4087 PN6 EN092- PN0, (.76) (3.4) (4.2) (.7) (9.28) 50 (5.9) 67 (47.4) 66 (45.2) SME B6.5 CLSS 50 S229 TBLE C, D, E, F S4087 PN4, 6, 2 WaterMaster integral / remote FEV DN40 to 200 ( /2 to 8 in.) cast iron sensor dimensions / weights pprox. weight in kg (lb) DN Process connection type D L F C E G X Integral Remote DN40 ( /2 in.) EN092- PN0, PN40 50 (5.9) 200 (7.87) 260 (0.24) 30.4 (.20) 85 (7.28) 38 (5.43) 30 (.8) 2 (27) (24) SME B6.5 CLSS (5.00) JIS 0K 40 (5.5) S229 TBLE F 40 (5.5) S229 TBLE CDE 35(5.3) S4087 PN4 35 (5.3) DN40 to 200 ( /2 to 8 in. NB) (FEV) dimensions / weights DS/WM EN Rev. Q 27

28 pprox. weight in kg (lb) DN Process connection type D L F C E G X Integral Remote DN50 EN092- PN0, PN6 65 (6.50) 200 (7.87) 270 (0.63) 38.3 (.5) 95 (7.68) 46 (5.75) 38 (.50) 3 (29) 2 (27) (2 in.) SME B6.5 CLSS (6.00) JIS 0K 55 (6.0) S4087 PN2 65 (6.50) S229 TBLE F 65 (6.50) S229 TBLE CDE 50(5.9) S4087 PN4, PN6 50 (5.9) DN65 S4087 PN4, PN6 65 (6.50) 200 (7.87) 275 (0.83) 45.2 (.78) 200 (7.87) 52 (5.98) 48 (.89) 5 (33) 4 (3) (2 /2 in.) S229 TBLE CDE 65(6.50) EN092- PN0 85 (7.28) EN092- PN6 85 (7.28) DN80 EN092- PN0, PN6 200 (7.87) 200 (7.87) 280 (.02) 5.5 (2.03) 205 (8.07) 56 (6.4) 6 (2.40) 6 (36) 5 (33) (3 in.) SME B6.5 CLSS (7.48) JIS 7.5K 2 (8.3) JIS 0K 85 (7.28) S229 TBLE CDE 85(7.28) S4087 PN4, PN6 85 (7.28) S229 TBLE F 205 (8.07) S4087 PN2 205 (8.07) DN00 EN092- PN0, PN6 220 (8.66) 250 (9.84) 320 (2.60) (2.5) 245 (9.65) 96.8 (7.75) 70 (2.76) 9 (42) 8 (40) (4 in.) SME B6.5 CLSS (9.00) JIS 7.5K 238 (9.37) JIS 0K 20 (8.27) S229 TBLE C D 25 (8.46) S4087 PN4, PN6 25 (8.46) S229 TBLE E 25 (8.46) S4087 PN2 230 (9.06) S229 TBLE F 230 (9.06) DN25 EN092- PN0, PN6 250 (9.84) 250 (9.84) 320 (2.60) (2.5) 245 (9.65) 97 (7.76) 70 (2.76) 20 (44) 9 (42) (5 in.) SME B6.5 CLSS (0.00) JIS 0K 250 (9.84) S229 TBLE CDE 255(0.04) S229 TBLE F 280 (.02) DN50 EN092 PN0, PN6 285 (.22) 300 (.8) 340 (3.39) 84.4 (3.32) 265 (0.43) 27 (8.54) 03 (4.06) 32 (70) 3 (68) (6 in.) SME B6.5 CLSS (0.98) JIS 7.5k 290 (.42) JIS 0K 280 (.02) S229 TBLE C D 280 (.02) S4087 PN4, PN6 280 (.02) S229 TBLE E 280 (.02) S229 TBLE F 305 (2.0) S4087 PN2 305 (2.0) DN200 EN092- PN0 340 (3.39) 350 (3.78) 365 (4.37) 09.8 (4.32) 290 (.42) 243 (9.57) 50 (5.9) 49 (08) 48 (05) (8 in.) EN092- PN6 340 (3.39) SME B6.5 CLSS (3.58) JIS 7.5K 342 (3.46) JIS 0K 330 (2.99) S229 TBLE C D 335 (3.9) S4087 PN4, PN (3.9) S229 TBLE E 335 (3.9) S229 TBLE F 370 (4.57) S4087 PN2 370 (4.57) DN40 to 200 ( /2 to 8 in. NB) (FEV) dimensions / weights (Continued) 28 DS/WM EN Rev. Q

29 FER DN40 to 300 ( /2 to 2 in. NB) 77.8 (3.06) 04.5 (4.) 98 (3.86) 89 (3.5) 20 (7.9) Ø04 (4.) G E F 78 (3.) X D C X L DN40 to 300 ( /2 to 2 in. NB) (FER) pprox. weight in kg (lb) DN Process connection type D L F E G X Integral Remote DN40 ( /2 in.) DN50 (2 in.) DN80 (3 in.) DN00 (4 in.) DN50 (6 in.) DN200 (8 in.) EN092- PN0, 6, 25, (5.9) 90 (7.48) 260 (0.24) 85 (7.28) 37 (5.39) 23.5 (0.93) 3.4 (29.5) 2.4 (27.3) SME B6.5 CLSS 50 S229 TBLE D, E, F EN092- PN0, 6, 25, (6.50) 90.5 (7.5) 26 (0.28) 86 (7.32) 38 (5.43) 29 (.4) 4.75 (32.45) 3.75 (30.25) SME B6.5 CLSS 50 EN092- PN0, 6, 25, (7.87) 90.5 (7.5) 280 (.04) (8.09) 57.5 (6.2) 47 (.85) 2.2 (46.64) 20.2 (44.4) SME B6.5 CLSS 50 S4087 PN6, 2 S229 TBLE D, E, F EN092- PN0, 6, 25, (8.86) (9.47) (.83) (8.88) 77.5 (6.98) 64 (2.52) 27.3 (60) 26.3 (58) SME B6.5 CLSS 50 S4087 PN6 EN092- PN0, 6, 25, (.8) (.44) (3.3) (0.8) 20.5 (8.29) 00.2 (3.94) 27.3 (60) 26.3 (58) SME B6.5 CLSS 50 S4087 PN6 EN092- PN0, (.76) (3.4) (4.2) (.7) (9.28) 26.7 (5.00) 68 (50) 67 (47.4) SME B6.5 CLSS 50 S229 TBLE C, D, E, F S4087 PN4, 6, 2 DN40 to 200 ( /2 to 8 in.) (FER) cast iron sensor dimensions / weights pprox. weight in kg (lb) DN Process connection type D L F C E G X Integral Remote DN40 ( /2 in.) EN092- PN0, 6, 25, (5.9) 200 (7.87) 260 (0.24) 30.4 (.20) 85 (7.28) 38 (5.43) 23.5 (0.93) 3 (29) (24) SME B6.5 CLSS (5.00) JIS 0K 40 (5.5) S229 TBLE CDE 35(5.3) S229 TBLE F 40 (5.5) S4087 PN4 35 (5.3) DN40 to 300 ( /2 to 2 in. NB) (FER) dimensions / weights DS/WM EN Rev. Q 29

30 pprox. weight in kg (lb) DN Process connection type D L F C E G X Integral Remote DN50 (2 in.) DN65 (2 /2 in.) DN80 (3 in.) DN00 (4 in.) DN25 (5 in.) DN50 (6 in.) DN200 (8 in.) DN250 (0 in.) DN300 (2 in.) EN092- PN0, 6, 25, (6.50) 200 (7.87) 270 (0.63) 38.3 (.5) 95 (7.68) 46 (5.75) 29 (.4) 4 (3) 2 (27) SME B6.5 CLSS (6.00) JIS 0K 55 (6.0) S4087 PN2 65 (6.50) S229 TBLE F 65 (6.50) S229 TBLE CDE 50(5.9) S4087 PN4, PN6 50 (5.9) EN092- PN0, 6, 25, (7.28) 200 (7.87) 275 (0.83) 45.2 (.78) 200 (7.87) 52 (5.98) 37 (.46) 5 (33) 3 (29) SME B6.5 CLSS (7.00) JIS0K 75 (6.89) S229 TBLE CDE 65(6.50) S229 TBLE F 85 (7.28) S4087 PN4, 6 65 (6.50) S4087 PN2 85 (7.28) EN092- PN0, 6, 25, (7.87) 200 (7.87) 280 (.02) 5.5 (2.03) 205 (8.07) 56 (6.4) 47 (.85) 20 (44) 8 (40) SME B6.5 CLSS (7.48) JIS 0K 85 (7.28) S229 TBLE CDE 85(7.28) S4087 PN4, 6 85 (7.28) S229 TBLE F 205 (8.07) S4087 PN2 205 (8.07) EN092- PN0, (8.66) 250 (9.84) 320 (2.60) (2.5) 245 (9.65) 96.8 (7.75) 64 (2.52) 27 (59) 25 (55) EN092- PN25, (9.25) SME B6.5 CLSS (9.00) JIS 7.5K 238 (9.37) JIS 0K 20 (8.27) S229 TBLE C D 25 (8.46) S4087 PN4, 6 25 (8.46) S4087 PN2 230 (9.06) EN092- PN0, (9.84) 250 (9.84) 320 (2.60) (2.5) 245 (9.65) 97 (7.76) 64 (2.52) 27 (59) 25 (55) EN092- PN25, (0.63) SME B6.5 CLSS (0.00) JIS 0K 250 (9.84) S229 TBLE C D 255 (0.04) EN092 PN0, (.22) 300 (.8) 340 (3.39) 84.4 (3.32) 265 (0.43) 27 (8.54) 00.2 (3.94) 33 (72) 3 (68) EN092 PN25, (.8) SME B6.5 CLSS (0.98) JIS 7.5k 290 (.42) JIS 0K 280 (.02) S229 TBLE C D 280 (.02) S4087 PN4, (.02) S4087 PN2 305 (2.0) EN092- PN0, (3.39) 350 (3.78) 365 (4.37) 09.8 (4.32) 290 (.42) 243 (9.57) 26.7 (4.99) 50 (0) 48 (06) EN092- PN25, (4.7) SME B6.5 CLSS (3.58) JIS 7.5K 342 (3.46) JIS 0K 330 (2.99) S229 TBLE C D 335 (3.9) S4087 PN4, (3.9) S4087 PN2 370 (4.57) EN092- PN0 395 (5.55) 450 (7.72) 389 (5.3) 36.8 (5.39) 33 (2.33) 268 (0.55) 53.5 (6.04) 77 (69) 75 (65) EN092- PN6 405 (5.94) EN092- PN (6.73) SME B6.5 CLSS (5.94) JIS 7.5K 400 (5.75) JIS 0K 400 (5.75) S229 TBLE C D 405 (5.94) S4087 PN4, (5.94) S4087 PN2 430 (6.93) EN092- PN0 445 (7.52) 500 (9.69) 44 (6.30) 62.2 (6.39) (3.33) 294 (57) (8.0) 4 (25) 2 (247) EN092- PN6 460 (8.) EN092- PN (9.09) SME B6.5 CLSS (9.09) JIS 0K 445 (7.52) S229 TBLE C D 455 (7.9) S4087 PN4, (7.9) S4087 PN2 490 (9.29) DN40 to 300 ( /2 to 2 in. NB) (FER) dimensions / weights (Continued) 30 DS/WM EN Rev. Q

31 FEF DN250 to 600 (0 to 24 in. NB) Ø04 (4.) 86 (3.4) G D C* *Base L *Dimension C = centre line to base of flowmeter body DN250 to 600 (0 to 24 in. NB) (FEF) DN Process connection type D L C G pprox. weight in kg (lb) DN250 SME B6.5 CLSS (5.94) 450 (7.72) 25 (8.46) 30 (.85) 300 (.8) 88 (94) (0 in.) SME B6.5 CLSS (7.52) 490 (9.29) EN092 - PN0 395 (5.55) 450 (7.72) EN092 PN6 405 (5.94) EN092 PN (6.73) 490 (9.29) EN092 PN (7.72) JIS 5K 385 (5.6) 450 (7.72) JIS 0K 400 (5.75) S4087 PN4, PN6 405 (5.94) S229 TBLE C D S229 TBLE E S4087 PN2 430 (6.93) S229 TBLE F DN250 to 600 (0 to 24 in. NB) (FEF) dimensions / weights DS/WM EN Rev. Q 3

32 DN Process connection type D L C G pprox. weight in kg (lb) DN300 SME B6.5 CLSS (9.09) 500 (9.69) 23 (9.09) 37 (2.48) 352 (3.86) 28 (282) (2 in.) SME B6.5 CLSS (20.47) 540 (2.26) EN092 PN0 445 (7.52) 500 (9.69) EN092 PN6 460 (8.) 500 (9.69) EN092 PN (9.09) 540 (2.26) EN092 PN40 55 (20.28) 540 (2.26) JIS 5K 430 (6.93) 500 (9.69) JIS 0K 445 (7.52) 500 (9.69) S4087 PN4, PN6 455 (7.9) 500 (9.69) S229 TBLE TBLE C D 455 (7.9) 500 (9.69) S229 TBLE E 455 (7.9) 500 (9.69) S4087 PN2 490 (9.29) 500 (9.69) S229 TBLE F 490 (9.29) 500 (9.69) DN350 SME B6.5 CLSS (2.06) 550 (2.65) (0.4) 346 (3.62) 376 (4.80) 00 (220) (4 in.) SME B6.5 CLSS (23.03) 570 (22.44) EN092 PN0 505 (9.88) 550 (2.65) EN092 PN6 520 (20.47) 550 (2.65) EN092 PN (2.85) 570 (22.44) EN092 PN (22.83) 570 (22.44) JIS 5K 480 (8.90) 550 (2.65) JIS 7.5K 530 (20.87) 550 (2.65) JIS 0K 490 (9.29) 550 (2.65) S4087 PN4, PN6 525 (20.67) 550 (2.65) S229 TBLE CDE 525(20.67) 550 (2.65) S4087 PN2 550 (2.65) 550 (2.65) S229 TBLE F 550 (2.65) 550 (2.65) S4087 PN (2.65) 570 (22.44) S229 TBLE H 550 (2.65) 570 (22.44) DN375 S4087 PN4, PN6 550 (2.65) 550 (2.65) (0.4) 346 (3.62) 376 (4.80) 5 (253) (5 in.) S229 TBLE C 550 (2.65) 550 (2.65) S4087 PN (22.83) 570 (22.44) DN400 SME B6.5 CLSS (23.62) 600 (23.62) 285 (.22) 37 (4.6) 420 (6.54) 5 (253) (6 in.) SME B6.5 CLSS (25.59) 620 (24.4) EN092 PN0 565 (22.24) 600 (23.62) EN092 PN6 580 (22.83) 600 (23.62) EN092 PN (24.4) 620 (24.4) EN092 PN (25.98) 620 (24.4) JIS 5K 540 (2.26) 600 (23.62) JIS 7.5K 582 (22.9) 600 (23.62) JIS 0K 560 (22.05) 600 (23.62) S4087 PN4, PN6 580 (22.83) 600 (23.62) S229 TBLE CDE 580(22.83) 600 (23.62) S4087 PN2 60 (24.02) 600 (23.62) S229 TBLE F 60 (24.02) 600 (23.62) S4087 PN35 60 (24.02) 620 (24.4) S229 TBLE H 60 (24.02) 620 (24.4) DN250 to 600 (0 to 24 in. NB) (FEF) dimensions / weights (Continued) 32 DS/WM EN Rev. Q

33 DN Process connection type D L C G pprox. weight in kg (lb) DN450 (8 in.) DN500 (20 in.) DN600 (24 in.) SME B6.5 CLSS (25.00) 700 (27.56) 37.5 (2.50) 402 (5.83) 480 (8.90) 60 (352) SME B6.5 CLSS (27.95) EN092 PN0 65 (24.2) EN092 PN6 640 (25.20) EN092 PN (26.38) EN092 PN (26.97) JIS 5K 605 (23.82) JIS 7.5K 652 (25.67) JIS 0K 620 (24.4) S4087 PN4, PN6 640 (25.20) S229 TBLE C D 640 (25.20) S229 TBLE E 640 (25.20) S4087 PN2 675 (26.57) S229 TBLE F 675 (26.57) S4087 PN (26.57) S229 TBLE H 675 (26.57) SME B6.5 CLSS (27.56) 770 (30.3) 345 (3.58) 429 (6.89) 520 (20.47) 27 (455) SME B6.5 CLSS (30.5) EN092 PN0 670 (26.38) EN092 PN6 75 (28.5) EN092 PN (28.74) EN092 PN (29.72) JIS 5K 655 (25.79) JIS 7.5K 706 (27.80) JIS 0K 675 (26.57) S4087 PN 4, PN6 705 (27.76) S229 TBLE CDE 705(27.76) S4087 PN2 735 (28.94) S229 TBLE F 735 (28.94) S4087 PN (28.94) S229 TBLE H 735 (28.94) SME B6.5 CLSS (32.09) 920 (36.22) (5.25) 472 (8.58) 60 (24.02) 35 (693) SME B6.5 CLSS (36.02) EN092 PN0 780 (30.7) EN092 PN6 840 (33.07) EN092 PN (33.27) EN092 PN (35.04) JIS 5K 770 (30.3) JIS 7.5K 80 (3.89) JIS 0K 795 (3.30) S4087 PN4, PN6 825 (32.48) S229 TBLE C D 825 (32.48) S229 TBLE E 825 (32.48) S4087 PN2 850 (33.46) S229 TBLE F 850 (33.46) S4087 PN (33.46) S229 TBLE H 850 (33.46) DN250 to 600 (0 to 24 in. NB) (FEF) dimensions / weights (Continued) DS/WM EN Rev. Q 33

34 Ordering information WaterMaster FEW, FEW2 and FEW8 Flowmeter system full bore, integral mount (DN0 to DN32 only) Flowmeter system full bore, remote mount Full bore sensor only for use with WaterMaster transmitter / remote Design Non-hazardous areas Hazardous areas Bore diameter DN0 ( 3 /8 in.) DN5 ( /2 in.) DN20 ( 3 /4 in.) DN25 ( in.) DN32 ( /4 in.) Liner material PTFE DN0 to 32 ( 3 /8 to /4 in. NB) Electrode design Standard Other Measuring electrodes material Hastelloy C-4 (2.460) Grounding accessories Not required One potential equalizing ring (stainless steel) Two potential equalizing rings (stainless steel) Other Process connection type (refer to pages 9 and 20) SME B6.5 B class 50 SME B6.5 B class 300 ISO / EN PN40 DIN PN40 Other Process connection material Carbon steel flanges DN20 to 32 ( 3 /4 to /4 in. NB) Stainless steel flange.457 (36 Ti) DN0 to 5 ( 3 /8 to /2 in. NB) Other Usage certifications Standard (without PED) Other Calibration type Class 2 calibration standard accuracy 0.4 % Class calibration high accuracy 0.2 % Extended range, class calibration high accuracy 0.2 % Extended range, class 2 calibration standard accuracy 0.4 % Temperature range installation / ambient temperature range Product coding field number , FEW FEW2 FEW8 X XXX X X X X XX X X X X X X X X X X X X Standard design / C ( 4 40 F) Nameplate dhesive Signal cable length and type Without signal cable 5 m (5 ft.) cable 0 m (30 ft.) cable 20 m (60 ft.) cable 30 m (00 ft.) cable 50 m (65 ft.) cable 80 m (260 ft.) cable 00 m (325 ft.) cable 50 m (490 ft.) cable Special length or cable type Explosion protection certification General purpose (non-ex design) FM Class Div. 2 usfmc Class Div. 2 TEX / IECEx Zone 2, 2 & D S4 D4 Z9 B D Z 9 B N P G P M Continued on next page Options 34 DS/WM EN Rev. Q

35 Flowmeter system full bore, integral mount (DN0 to DN32 only) Flowmeter system full bore, remote mount Full bore sensor only for use with WaterMaster transmitter / remote Protection class transmitter / protection class sensor Product coding field number , FEW FEW2 FEW8 IP67 (NEM 4X) / IP67 (NEM 4X) cable not fitted and potted to sensor IP67 (NEM 4X) / IP67 (NEM 4X) cable fitted and potted to sensor Cable conduits* M20 x.5 (plastic) NPT /2 in. (blanked when cable not fitted) M20 SW (armored) M20 SW sensor, M20 x.5 (plastic) power / output Without Power supply Without V C, 50 Hz 24VCor24VDC,50Hz V C, 60 Hz 24VCor24VDC,60Hz Input and output signal type HRT + 20 m + pulse + contact output PROFIBUS DP RS485 physical layer + pulse + contact output (general-purpose design only) MODBUS RTU RS485 physical layer + pulse + contact output (general-purpose design only) Without Configuration type / diagnostics type Not required Factory default/ standard Options** ccessories Configuration lead C X XXX X X X X XX X X X X X X X X X X X X 7 B D F Y G M Y 0 Options Documentation language German Italian Spanish French English Verification type M M2 M3 M4 M5 (default) Without fingerprint VeriMaster Potable water approval WRS cold water approval Without Power supply frequency (FEW 8 only) 50 Hz 60 Hz Number of testpoints (FEW 0 to 32 only) Chinese Swedish Finnish Portuguese Danish Norwegian M6 M7 M8 M MF MN V0 V3 CW CWY F5 F6 Point 3 Points * For FM or FMC pproved versions, NPT only permitted. ** dd codes for options. T T3 DS/WM EN Rev. Q 35

36 WaterMaster FEV, FEV2 and FEV8 Product coding field number , Flowmeter system, optimized full bore, integral mount FEV Flowmeter system, optimized full bore, remote mount Optimized full bore sensor only, for use with WaterMaster transmitter / remote Design Non-hazardous areas Hazardous areas Bore diameter DN40 ( /2 in.) DN50 (2 in.) DN65 (2 /2 in.) DN80 (3 in.) DN00 (4 in.) DN25 (5 in.) DN50 (6 in.) DN200 (8 in.) Liner material Polypropylene DN40 to 200 ( /2 to 8 in. NB) Electrode design FEV2 FEV8 X XXX X X X X XX X X X X X X X X X X X X Standard Measuring electrodes material Stainless steel 36 Hastelloy C-22 Super-austenitic steel Grounding accessories Standard One potential equalizing ring (stainless steel) Two potential equalizing rings (stainless steel) Process connection type (refer to pages 27 and 28) Flanges SME B6.5 class 50 Flanges S 4087 PN2 ( DN50 [2 in. NB]) Flanges S 4087 PN6 ( DN50 [2 in. NB]) Flanges S 4087 PN4 Flanges S 229 Table F Flanges S 229 Table E Flanges S 229 Table D Flanges S 229 Table C Flanges JIS G K (³ DN00 [4 in. NB]) Flanges JIS B2220 0K ISO/EN PN0 ISO / EN PN6 ( DN50 [2 in. NB]) ISO / EN PN40 (DN40 [ /2 in. NB] only) 6 bar rated Process connection material Carbon steel flanges Usage certifications Standard Calibration type Class 2 Calibration standard accuracy 0.4 % Class Calibration high accuracy 0.2 % Extended range, class calibration high accuracy 0.2 % Extended range, class 2 calibration standard accuracy 0.4 % V S C U 3 4 E0 E E2 E3 E4 E5 E6 J0 J S S2 S4 B B N P Continued on next page Options 36 DS/WM EN Rev. Q

37 Flowmeter system, optimized full bore, integral mount Flowmeter system, optimized full bore, remote mount Optimized full bore sensor only, for use with WaterMaster transmitter / remote Temperature range installation / ambient temperature range Standard design / C ( 4 40 F) Nameplate dhesive Signal cable length and type* Product coding field number , FEV FEV2 FEV8 Without signal cable 5 m (5 ft.) cable 0 m (30 ft.) cable 20 m (60 ft.) cable 30 m (00 ft.) cable 50 m (65 ft.) cable 80 m (260 ft.) cable 00 m (325 ft.) cable 50 m (490 ft.) cable Special length > 50 m (> 490 ft.) Explosion protection certification General purpose (non-ex design) FM Class Div. 2 usfmc Class Div. 2 TEX / IECEx Zone 2, 2 & 22 Protection class transmitter / protection class sensor IP67 (NEM 4X) / IP67 (NEM 4X) integral IP67 (NEM 4X) / IP68 (NEM 6P) cable not fitted and not potted IP67 (NEM 4X) / IP68 (NEM 6P) cable fitted and potted Cable conduits * M20 x.5 (plastic) NPT /2 in. (blanked when cable not fitted) M20 SW (armored) M20 SW sensor, M20 x.5 (plastic) power / output Without Power supply Without V C, 50 Hz 24VCor24VDC,50Hz V C, 60 Hz 24VCor24VDC,60Hz Others Input and output signal type HRT + 20 m + pulse + contact output PROFIBUS DP RS485 physical layer + pulse + contact output (general-purpose design only) MODBUS RTU RS485 physical layer + pulse + contact output (general-purpose design only) Without Configuration type / diagnostics type Without Factory defaults / standard diagnostics * The type of signal cable supplied (standard or armored) depends on the type of cable conduit (variant digit number 24) ordered. For FM or FMC pproved versions, NPT only permitted. X XXX X X X X XX X X X X X X X X X X X X G P M 2 3 B D F Y G M Y 0 Continued on next page Options DS/WM EN Rev. Q 37

38 Product coding field number , Flowmeter system, optimized full bore, integral mount FEV Flowmeter system, optimized full bore, remote mount FEV2 X XXX X X X X XX X X X X X X X X X X X X Optimized full bore sensor only, for use with WaterMaster transmitter / remote FEV8 Options** ccessories Configuration lead C Documentation language German Italian Spanish French English M M2 M3 M4 M5 (default) Other usage certifications Measuring Instruments Directive (MID) OIML R49 Calibration Verification type Without fingerprint VeriMaster Potable water approval WRS cold water approval NSF 6 meter approval DVGW CS Without Power supply frequency (sensor FEV8 only) 50 Hz 60 Hz Number of testpoints Point 3 Points **dd codes for options. Chinese Swedish Finnish Portuguese Danish Norwegian M6 M7 M8 M MF MN CM CM2 V0 V3 CW CWC CWD CWF CWY F5 F6 T T3 Options 38 DS/WM EN Rev. Q

39 WaterMaster FEF2 and FEF8 Flowmeter system, full bore, remote mount Product coding field number , FEF2 Full bore sensor only, for use with WaterMaster transmitter / remote FEF8 Design Non-hazardous areas Hazardous areas (DN 700 [27 in. NB]) Bore diameter DN250 (0 in.) DN300 (2 in.) DN350 (4 in.) DN375 (5 in.) DN400 (6 in.) DN450 (8 in.) DN500 (20 in.) DN600 (24 in.) Others Liner material Elastomer DN250 to 600 (0 to 24 in. NB) Hard rubber DN250 to 600 (0 to 24 in. NB) Other Electrode design Standard Others Measuring electrodes material Stainless steel 36 Hastelloy C-22 Super-austenitic steel (DN250 to 600 [0 to 24 in. NB]) Others Grounding accessories Standard One potential equalizing ring (stainless steel) Two potential equalizing rings (stainless steel) Others Process connection type (refer to pages 3 to 33) Flanges SME B6.5 class 50 Flanges SME B6.5 class 300 Flanges WW C207 class B Flanges WW C207 class D Flanges S 4087 PN2 Flanges S 4087 PN6 Flanges S 4087 PN4 Flanges S 229 Table F Flanges S 229 Table E Flanges S 229 Table D Flanges S 229 Table C Flanges S 229 Table H Flanges S 4087 PN35 Flanges JIS G K Flanges JIS B2220 0K Flanges JIS B2220 5K Flanges ISO / EN PN6 Flanges ISO / EN PN0 Flanges ISO / EN PN6 Flanges ISO / EN PN25 Flanges ISO / EN PN40 Others Note. DN80 to 200 (3 to 0 in. NB) available only with PN6 Process connection material Carbon steel flanges Others Usage certifications X XXX X X X X XX X X X X X X X X X X X X Standard Calibration type Class 2 calibration standard accuracy 0.4 % Class calibration high accuracy 0.2 % B Extended range, class calibration high accuracy 0.2 % N Extended range, class 2 calibration standard accuracy 0.4 % P Continued on next page K H 9 9 S C U Z C C2 E0 E E2 E3 E4 E5 E6 E7 E8 J0 J J2 S0 S S2 S3 S4 Z9 B Z Options DS/WM EN Rev. Q 39

40 Product coding field number , Flowmeter system, full bore, remote mount FEF2 X XXX X X X X XX X X X X X X X X X X X X Full bore sensor only, for use with WaterMaster transmitter / remote FEF8 Temperature range installation / ambient temperature range Standard design / C ( 4 40 F) Nameplate dhesive Signal cable length and type* Without signal cable 5 m (5 ft.) cable 0 m (30 ft.) cable 20 m (60 ft.) cable 30 m (00 ft.) cable 50 m (65 ft.) cable 80 m (260 ft.) cable 00 m (325 ft.) cable 50 m (490 ft.) cable Special Length > 50 m (> 490 ft.) (and / or armored cable) Explosion protection certification General purpose (non-ex design) Protection class transmitter / protection class sensor IP67 (NEM 4X) / IP68 (NEM 6P) cable not fitted and not potted IP67 (NEM 4X) / IP68 (NEM 6P) cable fitted and potted Cable conduits** M20 x.5 (plastic) NPT /2 in. (blanked when cable not fitted) M20 SW (armored) M20 SW sensor, M20 x.5 (plastic) power / output Without Power supply Without V C (50 Hz) 24VCor24VDC(50Hz) V C (60 Hz) 24VCor24VDC(60Hz) Input and output signal type HRT + 20 m + pulse + contact output PROFIBUS DP RS485 physical layer + pulse + contact output (general-purpose design only) MODBUS RTU RS485 physical layer + pulse + contact output (general-purpose design only) Without Configuration type / diagnostics type Without Factory defaults / standard diagnostics Options*** ccessories Configuration lead C Documentation language German Italian Spanish French English M M2 M3 M4 M5 (default) Verification type Without fingerprint VeriMaster Potable water approvals WRS cold water approval NSF 6 meter approval DVGW CS WRS 60 C (40 F) water approval Without Power supply frequency (sensor FEF 8 only) 50 Hz 60 Hz Number of testpoints Point 3 Points Chinese Swedish Finnish Portuguese Danish Norwegian M6 M7 M8 M MF MN V0 V3 CW CWC CWD CWF CWK CWY F5 F6 T T3 *Size is dependent on flange specification **The type of signal cable supplied (standard or armored) depends on the type of cable conduit (variant digit number 24) ordered for FM or FMC pproved versions, NPT only permitted. ***dd codes for options B D F Y G M Y 0 Options 40 DS/WM EN Rev. Q

41 WaterMaster FEW3, FEW32 and FEW38 Flowmeter system full bore, integral mount Flowmeter system full bore, remote mount Full bore sensor only for use with WaterMaster transmitter / remote Design Non-hazardous areas Hazardous areas Bore diameter DN0 ( 3 /8 in.) DN5 ( /2 in.) DN20 ( 3 /4 in.) DN25 ( in.) DN32 ( /4 in.) DN40 ( /2 in.) DN50 (2 in.) DN65 (2 /2 in.) DN80 (3 in.) DN00 (4 in.) DN25 (5 in.) DN50 (6 in.) DN200 (8 in.) DN250 (0 in.) DN300 (2 in.) DN350 (4 in.) DN400 (6 in.) DN450 (8 in.) DN500 (20 in.) DN600 (24 in.) DN700 (28 in.) DN750 (29 in.) DN760 (30 in.) DN800 (32 in.) DN900 (36 in.) DN000 (40 in.) DN050 (42 in.) DN00 (44 in.) DN200 (48 in.) DN350 (54 in.) DN400 (56 in.) DN500 (60 in.) DN600 (64 in.) DN650 (66 in.) DN800 (72 in.) DN950 (78 in.) DN2000 (80 in.) DN200 (84 in.) DN2200 (88 in.) DN2400 (96 in.) Others Liner material PTFE DN0 to 600 ( 3 /8 to 24 in. NB) Hard rubber DN40 to 2400 ( /2 to 96 in. NB) Elastomer DN40 to 2400 ( /2 to 96 in. NB) Electrode design Standard Other Measuring electrodes material Hastelloy C-4 (2.460) Stainless steel 36L Hastelloy C-22 Grounding accessories Not required Standard One potential equalizing ring (stainless steel) Two potential equalizing rings (stainless steel) Product coding field number , FEW3 FEW32 FEW38 X XXX X X X X XX X X X X X X X X X X X X H K 9 D S C Continued on next page Options DS/WM EN Rev. Q 4

42 Product coding field number , Flowmeter system full bore, integral mount FEW3 Flowmeter system full bore, remote mount FEW32 X XXX X X X X XX X X X X X X X X X X X X Full bore sensor only for use with WaterMaster transmitter / remote FEW38 Process connection type (refer to pages 9 to 26) Flanges SME B6.47 series B / B6.5 Class 50 Flanges SME B6.47 series B / B6.5 Class 300 Flanges SME B6.47 series Class 50 Flanges SME B6.47 series Class 300 Flanges WW C207 Class B Flanges WW C207 Class D Flanges WW C207 Class E Flanges WW C207 Class F Flanges JIS 0K Flanges JIS 5K Flanges S 4087 PN 6 Flanges S 229 Table E Flanges S 229 Table D Flanges S 4087 PN 35 ISO 7005, DIN, EN 092- PN6 ISO 7005, DIN, EN 092- PN0 ISO 7005, DIN, EN 092- PN6 ISO 7005, DIN, EN 092- PN25 ISO 7005, DIN, EN 092- PN40 Process connection material Carbon steel flanges Stainless steel flange Usage certifications Standard (without PED) Calibration type Class 2 calibration standard accuracy 0.4 % Class calibration high accuracy 0.2 % B Temperature range installation / ambient temperature range Standard design/ C ( 4 40 F) Nameplate dhesive Signal cable length and type Without signal cable 5 m (5 ft.) cable 0 m (30 ft.) cable 20 m (60 ft.) cable 30 m (00 ft.) cable 50 m (65 ft.) cable 80 m (260 ft.) cable 00 m (325 ft.) cable 50 m (490 ft.) cable Special length or cable type Explosion protection certification* General purpose (non-ex design) FM Class Div. 2 usfmc Class Div. 2 TEX / IECEx Zone 2, 2 & 22 3 B B3 C C2 C3 C4 J J2 E E4 E5 E8 S0 S S2 S3 S4 B D G P M Continued on next page Options 42 DS/WM EN Rev. Q

43 Flowmeter system full bore, integral mount Flowmeter system full bore, remote mount Full bore sensor only for use with WaterMaster transmitter / remote Protection class transmitter / protection class sensor IP67 (NEM 4X) / IP67 (NEM 4X) cable not fitted and not potted to sensor IP 67 (NEM 4x) / IP68 (NEM 6P) cable not fitted and not potted to sensor IP 67 (NEM 4x) / IP68 (NEM 6P) cable fitted and potted to sensor Cable conduits ** M20 x.5 (plastic) NPT /2 in. (blanked when cable not fitted) M20 SW (armored) M20 SW sensor, M20 x.5 (plastic) power / output Without Power supply Without V C, 50 Hz 24VCor24VDC,50Hz V C, 60 Hz 24VCor24VDC,60Hz Input and output signal type HRT + 20 m + pulse + contact output PROFIBUS DP RS485 physical layer + pulse + contact output (general-purpose design only) MODBUS RTU RS485 physical layer + pulse + contact output (general-purpose design only) Without Configuration type / diagnostics type Not required Factory default / Standard Options*** ccessories Configuration lead C Documentation language German Italian Spanish French English M M2 M3 M4 M5 (default) Product coding field number , Chinese Swedish Finnish Portuguese Danish Norwegian FEW3 FEW32 FEW38 M6 M7 M8 M MF MN X XXX X X X X XX X X X X X X X X X X X X Lay length Isolength DN0 to 600 ( 3 /8 to 24 in.) JB and.25d DN800 to 2400 (72 to 96 in.).3d DN700 to 2400 (28 to 96 in.) JK.0D DN700 to 650 (28 to 66 in.) JH Verification type Without fingerprint V0 VeriMaster V3 Potable water approval WRS cold water approval CW DVGW CWD WRS 60 C (40 F) water approval CWK NSF material approval CWM Without CWY Power supply frequency (sensor FEW38 only) 50 Hz F5 60 Hz F6 * FM approval in process. FEF product still available with full FM approval ** The type of signal cable supplied (standard or armored) depends on the type of cable conduit (variant digit number 24) ordered. For FM or FMC pproved versions, NPT only permitted. *** dd codes for options. 2 3 B D F Y G M Y 0 Options DS/WM EN Rev. Q 43

44 WaterMaster FER reduced-bore sensor flowmeter series Product coding field number , WaterMaster system. Reduced-bore sensor with remote mounted transmitter FER2 WaterMaster system. Reduced-bore sensor with integral transmitter WaterMaster reduced-bore sensor only, remote mount, without transmitter Bore diameter DN 40 ( /2 in.) DN 50 (2 in.) DN 65 (2 /2 in.) DN 80 (3 in.) DN 00 (4 in.) DN 25 (5 in.) DN 50 (6 in.) DN 200 (8 in.) DN 250 (0 in.) DN 300 (2 in.) DN 350 (4 in.) DN 375 (5 in.) DN 400 (6 in.) DN 450 (8 in.) DN 500 (20 in.) DN 600 (24 in.) Liner material Elastomer DN40 to 600 ( /2 to 24 in. NB) Electrode design FER FER8 XXX X X X X XX X X X X X X X X X X X X Standard Measuring electrodes material Stainless steel 36 Super austenitic steel (.4529) Grounding accessories x Stainless steel equalizing ring 2 x Stainless steel equalizing rings Process connection type (refer to pages 29 and 30) Flanges NSI / SME B6.5 / 6.47 series B Class 50 Flanges WW C207 Class E Flanges JIS 7.5K Flanges JIS 0K Flanges S 4087 PN 2 Flanges S 4087 PN 6 Flanges S 4087 PN 4 Flanges S 229 Table F Flanges S 229 Table E Flanges S 229 Table D Flanges S 229 Table C ISO 7005 PN 0 EN 092- ISO 7005 PN 6 EN 092- ISO 7005 PN 40 EN 092- Process connection material Carbon steel Usage certifications K S U 3 4 (40 / 50 / 80 / 00 / ) (40/50/80) (00 / ) (40 / 50 / 80 / 00 / ) (50 / 80 / 00 / ) (50 / 80 / 00 / / ) (40 / 50 / 80 / 00 / ) (40 / 50 / 80 / 00 / ) (40 / 50 / 80 / 00 / 25 / ) (40 / 50 / 80 / 00 / ) (40 / 50 / 80 / 00 / ) (40 600) (40 600) (40) Standard C3 J0 J E0 E E2 E3 E4 E5 E6 S S2 S4 B Continued on next page Options 44 DS/WM EN Rev. Q

45 WaterMaster system. Reduced-bore sensor with remote mounted transmitter WaterMaster system. Reduced-bore sensor with integral transmitter WaterMaster reduced-bore sensor only, remote mount, without transmitter Calibration type Class 2 calibration standard accuracy 0.4 % Class calibration high accuracy 0.2 Extended range, class calibration high accuracy 0.2 % Extended range, class 2 calibration standard accuracy 0.4 % Installation temperature range / ambient temperature range See previous page Standard design C ( 4 40 F) Name plate dhesive label Signal cable length and type Without signal cable 5 m (6.4 ft) 0 m (32.8 ft) 20 m (65.6 ft) 30 m (98.4 ft) 50 m (64.0 ft) 80 m (262.5 ft) 00 m (325 ft) 50 m (490 ft) Others Explosion protection certification General purpose (non-ex design) Protection class transmitter / protection class sensor IP67 (NEM 4X) / IP68 (NEM 6P) cable not fitted and not potted IP67 (NEM 4X) / IP68 (NEM 6P) cable fitted and potted Cable conduits* M20 x.5 NPT /2 in (blanked when cable not fitted) M20 SW armored (FEV2 and FEV8 only) M20 SW sensor, output and power connector (FEV2 and FEV8 only) Power supply Without (FEV8 only) V C, 50 Hz 24VCor24VDC,50Hz V C, 60 Hz 24VCor24VDC,60Hz Input and output signal type HRT + 20 m + pulse + contact output PROFIBUS DP RS485 physical layer + pulse + contact output (FEV and FEV2 only) MODBUS RTU RS485 physical layer + pulse + contact output (FEV and FEV2 only) Without (FEV8 only) Configuration type / diagnostics type Without (FEV8 only) Factory defaults / standard diagnostics (FEV and FEV2 only) Options** Documentation language German Italian Spanish French English Verification type M M2 M3 M4 M5 (default) Without fingerprint VeriMaster Potable water approval WRS cold water approval DVGW CS Power supply frequency (sensor FER8 only) 50 Hz 60 Hz Product coding field number , Chinese Portuguese Russian Danish FER2 FER FER8 M6 M MB MF V0 V3 CW CWD CWF * The type of signal cable supplied (standard or armored) depends on the type of cable conduit (variant digit number 24) ordered. For FM or FMC pproved versions, NPT only permitted. **dd codes for options. F5 F6 XXX X X X X XX X X X X X X X X X X X X B N P B D F G M Y 0 Options DS/WM EN Rev. Q 45

46 transmitter for WaterMaster FET0 and FET2 Transmitter module Remote transmitter Design Non-hazardous area Hazardous area Temperature range installation / ambient temperature range Product coding field number FET0 FET2 5 X X X X X X X X X Options Standard design / C ( 4 40 F) Nameplate dhesive Signal cable length Without signal cable 0 Explosion protection Without (transmitter only) FM Class Div. 2 usfmc Class Div. 2 TEX / IECEx Zone 2, 2 & 22 Protection class transmitter / protection class sensor Y G P M IP67 (NEM 4X) / IP67 (NEM 4X) Cable conduits M20 x.5 (plastic) NPT /2 in. (blanked when cable not fitted) M20 SW (armored) M20 SW sensor, M20 x.5 (plastic) power / output Without Power supply B D F Y V C 24VCor24VDC Input and output 2 HRT + 20 m + pulse + contact output PROFIBUS DP RS485 physical layer + pulse + contact output (general-purpose design only) MODBUS RTU RS485 physical layer + pulse + contact output (general-purpose design only) Configuration type / diagnostics type G M Factory defaults / standard diagnostics Options** ccessories Configuration lead C Documentation German Italian Spanish French English M M2 M3 M4 M5 (default) Chinese Swedish Finnish Portuguese Danish Norwegian M6 M7 M8 M MF MN Other usage Measuring Instruments Directive (MID) CM *The transmitter converter module Input and Output Signal Type must match the transmitter backplane output configuration (HRT or PROFIBUS) see OI/FET00-EN. **dd codes for options. Common accessories ccessory Item Number ccessory Item Number WaterMaster C Fuse F Type T 250 m /S TR5 WaterMaster DC Fuse F2 Type T2/STR5 WaterMaster Infra Red Comms Pack WaterMaster Backplane PCB Board (STD) WaterMaster Sensor PCB Board WaterMaster Comms Cable B204 B2042 MJBX9932 WTX2505 WTX2506 WEBC2500 Signal cable for remote WaterMaster transmitter 5 m (5 ft.) 0 m (30 ft.) 20 m (60 ft.) 30 m (00 ft.) 50 m (65 ft.) 80 m (260 ft.) 00 m (325 ft.) 50 m (490 ft.) 500 m (650 ft.) STT4500/05 STT4500/0 STT4500/20 STT4500/30 STT4500/50 STT4500/80 STT4500/00 STT4500/50 STT4500/ DS/WM EN Rev. Q

47 ccessory rmored signal cable for remote WaterMaster transmitter 5 m (5 ft.) 0 m (30 ft.) 20 m (60 ft.) 30 m (00 ft.) 50 m (65 ft.) 80 m (260 ft.) 00 m (325 ft.) 50 m (490 ft.) 500 m (650 ft.) Item Number STT450/05 STT450/0 STT450/20 STT450/30 STT450/50 STT450/80 STT450/00 STT450/50 STT450/500 cknowledgements Microsoft is a registered trademark of Microsoft Corporation in the United States and/or other countries Modbus is a registered trademark of the Modbus-ID organization HRT is a registered trademark of the HRT Communication Foundation DS/WM EN Rev. Q 47

48 Contact us BB Limited Process utomation Oldends Lane Stonehouse Gloucestershire GL0 3T UK Tel: Fax: BB Inc. Process utomation 25 E. County Line Road Warminster P 8974 US Tel: Fax: Note We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. BB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. ny reproduction, disclosure to third parties or utilization of its contents in whole or in parts is forbidden without prior written consent of BB. Copyright 203 BB ll rights reserved 3KXF20R00 DS/WM EN Rev. Q BB Engineering (Shanghai) Ltd. Process utomation No. 5, Lane 369, Chuangye Road 2039, Shanghai, P.R. China Phone: +86 (0) Fax: +86 (0) Mail:china.instrumentation@cn.abb.com Sales Service Software