ST25DV-PWM product presentation. July 2018
|
|
|
- Avice Parker
- 5 years ago
- Views:
Transcription
1 ST25DV-PWM product presentation July 2018
2 Main ST25DV-PWM Market Segments 2 Smart Industry Smart City Industrial Lighting, Motor control Street Lighting,, building Lighting (offices, museums )
3 ST25DV-PWM Key Use Cases 3 Product configuration Servicing & Maintenance Parameter settings Simple and Flexible Update parameters in the field Easy to use and Adaptable
4 ST25DV-PWM in Lighting Market 4 High-end segment Previous New Connector + Resistor with manual operation ST25DV-I2C ISO15693 tag I2C MCU (32-bit) MCU (32-bit) PWM PWM LED power stage (MOSFET) LED power stage (MOSFET) With MCU on board Low-end segment Previous New Connector + Resistor with manual operation ST25DV-PWM ISO15693 tag PWM RC + ampli LED driver IC (analog) LED driver IC (analog) Without MCU on board Patents pending
5 Typical NFC Type 5 Range 5 NFC phone ISO15693 (26kb/s) ST25DV-PWM EEPROM Up to 7cm (3in.) ISO15693 (26kb/s) ST25DV-PWM EEPROM Up to 1m (3ft) RFID reader
6 ST25DV-PWM Dynamic NFC Tag 6 ST25DV02K-W1 / -W2 RF Tag SO8 ISO NFC Type V 26kb/s (53kb/s) TSSOP8 PWM output EEPROM 2K-bit bit password TruST25 Digital signature Use cases Industrial applications like Lighting LED driver, Motor control Key Features ISO15693 and NFC Type V 2K-bit memory Up to 2 PWM signal (push pull) Up to 15 bits resolution (62.5ns resolution step) Power Supply 1.8V - 5.5V -40 C to +105 C (PWM) temperature range TruST25 digital signature Key Benefits 2 in 1 chip, putting NFC connectivity with PWM functionality Cost optimized solution to address low end Lighting market Significant BOM reduction as no MCU is required to drive the system
7 2 product options 7 1x PWM version 2x PWM version AC0 2kbit memory size Vcc AC0 2kbit memory size Vcc PWM2 AC1 ISO PWM generator PWM1 Vss AC1 ISO PWM generator PWM1 Vss ICRef = 0x38 for 1x PWM ICRef = 0x39 for 2x PWM 8 pins packages for both version pin to pin compatibility
8 Memory Mapping & Password Management 8 EEPROM density 2k-bit User EEPROM area configurable in 1 or 2 areas Each area is individually read-/write- protected by password command 64 bit password 1 area 2x 32-bit password 2 areas PWM control area Individually read/write protected by 32 bit password System EEPROM area Access protected by 32 bit password Specific block used to store a 64 bit UID Its value is written by ST on the production line Dedicated area to store the Digital Signature User area User + System Area Area 1 UID (ICref) PWM ctrl area Digital Signature System Area (including conf) Or Independent PWM configuration registers (enable, period, pulse width) are accessible through dedicated PWM password Area 1 Area 2 UID (ICref) PWM ctrl area Digital Signature System Area (including conf)
9 Dynamic NFC / RFID Tags Series 9 Contactless Interface ST25DV-PWM series ST25DV-I2C series M24LR series ISO15693 NFC Type 5 ISO15693 NFC Type 5 ISO15693 NFC compatible RF range Long range (up to 1m) Long range (up to 1m) Long range (up to 1m) RF speed 26kbps 26kbps 26kbps Serial Interface No Fast Transfer mode No Yes (256B buffer) No Energy Harvesting No Yes Yes Digital output 2x PWM OD or CMOS GPO Open-Drain GPO Extra features - Low Power mode - Memory format EEPROM data EEPROM data EEPROM data Memory size 2k-bit 4k / 16k / 64k-bit 4k / 16k / 64k-bit Data protection Temperature range Package Password 64-bit Digital signature -40 C to +85 C (105 C RF) SO8 / TSSOP8 Password 64-bit -40 C to +85 C -40 C to +125 C (105 C RF) SO8 / TSSOP8 / FPN8 / FPN12 / WLCSP10 / SBN12 * * SBN12: Die form, sawn and Bumped wafer, 120µm thickness, inkless 8 wafer Password 32-bit -40 C to +85 C SO8 / TSSOP8 / FPN8
10 PWM Features Summary 10 PWM characteristics Clock Frequency Clock accuracy PWM signal output PWM frequency PWM resolution Target 16MHz +/- 10% (over temperature range) 1 port or 2 ports product version from 488Hz to 31.25kHz from 31.25kHz 62.5ns (step) 3.9kHz. to 488Hz Vcc supply 1.8V to 5.5V PWM sinking current Start up time up to 4mA output driver across Vcc supply range < 3ms
11 ST25DV-PWM Evaluation Board 11 ST25DV-PWM discovery kit ST25DV02K-W2 Dynamic NFC tag IC 49x26mm 8 turns antenna PWM frequency and duty cycle through Android App or PC Software Duty cycle illustration with LED ramp Connector to ST25DV-DISCOVERY kit to monitor the PWM signal on display ST25DV-PWM-eSET
12 ST25DV-PWM - Innovation for Industrial 12 Coming soon NFC Forum Type 5 for smartphone interface RFID ISO15693 for factory programming and track & trace Innovative 2 x PWM outputs TruST25 digital signature Large operating voltage V Industrial temperature range -40 C / +105 C Coming soon: NFC certification & 10-y longevity program 4 patents pending to protect ST & customers Turn-key evolutive discovery kit Application specific Lighting Motor control Other industrial
13 ST25DV-PWM Part Numbers 13 ST25DV-PWM Package 2k-bit 1xPWM 2k-bit 2xPWM Dynamic NFC / RFID tag SO8 ST25DV02K-W1R8S3 ST25DV02K-W2R8S3 RF ISO PWM IF TSSOP8 + Extended temperature ST25DV02K-W1R8T3 ST25DV02K-W2R8T3
14 Solutions for NFC / RFID Tags and Readers Thank You!
ST25TA product presentation. June 2018
ST25TA product presentation June 2018 ST25TA Product 2 The ST25TA chip belongs to ST25 NFC / RFID Tags & Readers family. The ST25TA product is HF Tag based on ISO14443 & NFC forum standards with following
Operational Description
Operational Description Wallterminal WT2000 ISO Tagit The Wallterminal WT2000 consists of the two components control unit and reader unit. The control unit is usually mounted in a save area inside the
NFC Readers Easy Implementation in Challenging Environments. Dan Merino Application Engineer
NFC Readers Easy Implementation in Challenging Environments Dan Merino Application Engineer Agenda 2 Presentation Time Speaker 9:30 Challenging Environments Dan Merino 9:40 ST s Unique features 10:00 Product
Robotic Development Kit. Powered using ATMEL technology
Robotic Development Kit Powered using ATMEL technology Index 1. System overview 2. Technology overview 3. Individual dev-kit components I. Robot II. Remote III. IR-Pod IV. Base-Station V. RFID 4. Robonii
A9211B ISO/IEC 14443A RFID TAG IC
FEATURE Compatible with ISO/IEC 14443A Standard No external power supply required 13.56MHz operating frequency Total embedded 2048 bit OTP memory 100% ASK demodulator Cascaded two level 7 byte serial number
1 kbit Read/Write, ISO C / EPC C-1 G-2 Passive / Battery-assisted Contactless IC
EM MICROELECTRONIC - MRIN S 1 kbit Read/Write, ISO 18000-6C / EPC C-1 G-2 Passive / Battery-assisted Contactless IC Description is a long range passive / battery-assisted UHF RFID tag IC compliant with
I n t e l l i g e n t 1 k B y t e M e m o r y C h i p w i t h M i f a r e c o m p a t i b i l i t y a n d 4 - b y t e U I D
I n t e l l i g e n t 1 k B y t e M e m o r y C h i p w i t h M i f a r e c o m p a t i b i l i t y a n d 4 - b y t e U I D SLE 66R35I I n t e l l i g e n t 1 k B y t e M e m o r y C h i p w i t h M i
HT162X HT1620 HT1621 HT1622 HT16220 HT1623 HT1625 HT1626 COM
RAM Mapping 328 LCD Controller for I/O MCU PATENTED PAT No. : 099352 Technical Document Application Note Features Operating voltage: 2.7V~5.2V Built-in RC oscillator 1/4 bias, 1/8 duty, frame frequency
DISCONTINUED. Modulation Type Number of RF Channels 15
RFM products are now Murata Products 2.4 GHz Spread Spectrum Transceiver Module Small Size, Light Weight, Low Cost Sleep Current less than 3 µa FCC, Canadian IC and ETSI Certified for Unlicensed Operation
512 bit Read/Write Multi-purpose Contactless Identification Device
EM MICROELECTRONIC - MARIN SA EM4205-EM4305 512 bit Read/Write Multi-purpose Contactless Identification Device Description EM4205/4305 is a CMOS integrated circuit intended for use in electronic Read/Write
Ocean Controls KT-5198 Dual Bidirectional DC Motor Speed Controller
Ocean Controls KT-5198 Dual Bidirectional DC Motor Speed Controller Microcontroller Based Controls 2 DC Motors 0-5V Analog, 1-2mS pulse or Serial Inputs for Motor Speed 10KHz, 1.25KHz or 156Hz selectable
Servo click. PID: MIKROE 3133 Weight: 32 g
Servo click PID: MIKROE 3133 Weight: 32 g Servo click is a 16-channel PWM servo driver with the voltage sensing circuitry. It can be used to simultaneously control 16 servo motors, each with its own programmable
UCS Channel LED Driver / Controller
GENERAL DESCRIPTION 3-Channel LED Driver / Controller The UCS1903 is a 3-channel LED display driver / controller with a built-in MCU digital interface, data latches and LED high voltage driving functions.
Block Diagram , E I F = O 4 ) + J H 6 E E C + E H? K E J +,, H E L A H * E = I + E H? K E J + + % 8,, % 8 +, * * 6 A. H A G K A? O
PAT No. : 099352 RAM Mapping 488 LCD Controller for I/O MCU Technical Document Application Note Features Operating voltage: 2.7V~5.2V Built-in LCD display RAM Built-in RC oscillator R/W address auto increment
DISCONTINUED. Modulation Type Number of RF Channels 15
RFM Products are now Murata products. 2.4 GHz Spread Spectrum Transceiver Module Small Size, Light Weight, Built-In Antenna Sleep Current less than 3 µa FCC, Canadian IC and ETSI Certified for Unlicensed
EVAL-ADM8843. Evaluation Board for Charge Pump Driver for LCD White LED Backlights. Preliminary Technical Data
Evaluation Board for Charge Pump Driver for LCD White LED Backlights EVAL-ADM8843 FEATURES ADM8843 drives 4 white LEDs from a 2.6V to 5.5V (li-ion) input supply 1x/1.5x/2x Fractional Charge Pump to maximize
Comparing the UC3842, UCC3802, and UCC3809 Primary Side PWM Controllers. Table 1. Feature comparison of the three controllers.
Design Note Comparing the UC, UCC0, and UCC09 Primary Side PWM Controllers by Lisa Dinwoodie Introduction Despite the fact that the UC and the UCC0 are pin for pin compatible, they are not drop in replacements
Characteristic Sym Notes Minimum Typical Maximum Units Operating Frequency Range MHz Operating Frequency Tolerance khz
DEVELOPMENT KIT (Info Click here) 2.4 GHz ZigBee Transceiver Module Small Size, Light Weight, +18 dbm Transmitter Power Sleep Current less than 3 µa FCC and ETSI Certified for Unlicensed Operation The
PATENTED. PAT No. : HT1622/HT1622G RAM Mapping 32 8 LCD Controller for I/O MCU. Features. General Description.
RAM Mapping 328 LCD Controller for I/O MCU PATENTED PAT No. : 099352 Features Operating voltage: 2.7V~5.2V Built-in RC oscillator 1/4 bias, 1/8 duty, frame frequency is 64Hz Max. 328 patterns, 8 commons,
Design of Adaptive RFID Reader based on DDS and RC522 Li Yang, Dong Zhi-Hong, Cong Dong-Sheng
International Conference on Applied Science and Engineering Innovation (ASEI 2015) Design of Adaptive RFID Reader based on DDS and RC522 Li Yang, Dong Zhi-Hong, Cong Dong-Sheng Beijing Key Laboratory of
WJM1000. Next Generation RFID Reader Module Based on the WJC200 Gen2 RFID reader chipset. Key Features
Key Features Multi-protocol support: ISO 18000-6C (Gen2) & ISO 18000-6B Dynamic RF output power: 10dBm to 24dBm range Two antenna ports for added flexibility Special high performance single tag access
Battery Powered Tags for ISO/IEC Klaus Finkenzeller
Battery Powered Tags for ISO/IEC 14443 Klaus Finkenzeller 17.05.2011 Battery powered Tags for ISO/IEC 14443 Content Requirements to ISO/IEC 14443 Limiting factors of very small transponder antennas Communication
Characteristic Sym Notes Minimum Typical Maximum Units Operating Frequency Range MHz Operating Frequency Tolerance khz
DEVELOPMENT KIT (Info Click here) 2.4 GHz ZigBee Transceiver Module Small Size, Light Weight, Low Cost Sleep Current less than 3 µa FCC and ETSI Certified for Unlicensed Operation The ZMN2405 2.4 GHz transceiver
LSI/CSI LS7560N LS7561N BRUSHLESS DC MOTOR CONTROLLER
LSI/CSI LS7560N LS7561N LSI Computer Systems, Inc. 15 Walt Whitman Road, Melville, NY 747 (631) 71-0400 FAX (631) 71-0405 UL A3800 BRUSHLESS DC MOTOR CONTROLLER April 01 FEATURES Open loop motor control
PN5180 The best full NFC frontend on the market
PN580 The best full NFC frontend on the market Product support package Public MobileKnowledge January 206 Agenda Watch recording Session 27 th January: PN580 product support package Where to find PN580
LPR2430ER 2.4 GHz Spread Spectrum Transceiver Module Small Size, Light Weight, +18 dbm Transmitter Power
RFM products are now Murata Products LPR430R.4 Hz Spread Spectrum ransceiver Module Small Size, Light Weight, +8 m ransmitter Power F, anadian I and SI ertified for nlicensed peration he LPR430R.4 Hz transceiver
PROMAG RWM600A. ISO/IEC15693 Advanced Reader Module. Overview. Features. Application. Specifications. Application Circuit
Overview ISO569 reader module works with smart label, based on transponders with an operating frequency of.56mhz (e.g. I-CODE SL, Tag-It HF-I etc.), based on TI-RFID technology. Depending on the size of
Lab Experiments. Boost converter (Experiment 2) Control circuit (Experiment 1) Power diode. + V g. C Power MOSFET. Load.
Lab Experiments L Power diode V g C Power MOSFET Load Boost converter (Experiment 2) V ref PWM chip UC3525A Gate driver TSC427 Control circuit (Experiment 1) Adjust duty cycle D The UC3525 PWM Control
DASL 120 Introduction to Microcontrollers
DASL 120 Introduction to Microcontrollers Lecture 2 Introduction to 8-bit Microcontrollers Introduction to 8-bit Microcontrollers Introduction to 8-bit Microcontrollers Introduction to Atmel Atmega328
LSI/CSI LS7290 STEPPER MOTOR CONTROLLER. LSI Computer Systems, Inc Walt Whitman Road, Melville, NY (631) FAX (631)
LSI/CSI UL A800 FEATURES: LSI Computer Systems, Inc. 1 Walt Whitman Road, Melville, NY 114 (1) 1-0400 FAX (1) 1-040 STEPPER MOTOR CONTROLLER Controls Bipolar and Unipolar Motors Cost-effective replacement
MD03-50Volt 20Amp H Bridge Motor Drive
MD03-50Volt 20Amp H Bridge Motor Drive Overview The MD03 is a medium power motor driver, designed to supply power beyond that of any of the low power single chip H-Bridges that exist. Main features are
WifiBotics. An Arduino Based Robotics Workshop
WifiBotics An Arduino Based Robotics Workshop WifiBotics is the workshop designed by RoboKart group pioneers in this field way back in 2014 and copied by many competitors. This workshop is based on the
Training Schedule. Robotic System Design using Arduino Platform
Training Schedule Robotic System Design using Arduino Platform Session - 1 Embedded System Design Basics : Scope : To introduce Embedded Systems hardware design fundamentals to students. Processor Selection
CHIP DESCRIPTION & TEST SPECIFICATIONS
CHIP DESCRIPTION & TEST SPECIFICATIONS Chip description The integrated circuit has been designed using BYE technology (BiCMOS 0.8 µm) as from HIT-KIT v3.10. Die area is 2.5x2.5mm 2 and it has to be housed
Controlling DC Brush Motor using MD10B or MD30B. Version 1.2. Aug Cytron Technologies Sdn. Bhd.
PR10 Controlling DC Brush Motor using MD10B or MD30B Version 1.2 Aug 2008 Cytron Technologies Sdn. Bhd. Information contained in this publication regarding device applications and the like is intended
Platform Migration 8510 to PNA. Graham Payne Application Engineer Agilent Technologies
Platform Migration 8510 to PNA Graham Payne Application Engineer Agilent Technologies We set the standard... 8410 8510 When we introduced the 8510, we changed the way S-parameter measurements were made!
JMY5011H IC Card Reader
NFC & MIFARE & ISO14443A & ISO14443B & ISO15693 IC CARD MODULE JMY5011H IC Card Reader User s manual (Revision 1.03) Jinmuyu Electronics Co. LTD 2016/5/31 Please read this manual carefully before using.
R/W address auto increment External Crystal kHz oscillator
RAM Mapping 328 LCD Controller for I/O MCU PATENTED PAT No. : 099352 Features Operating voltage: 2.7V~5.2V R/W address auto increment External Crystal 32.768kHz oscillator Two selectable buzzer frequencies
PATENTED. PAT No. : HT1622/HT1622G RAM Mapping 32 8 LCD Controller for I/O MCU. Features. General Description.
RAM Mapping 328 LCD Controller for I/O MCU PATENTED PAT No. : 099352 Features Operating voltage: 2.7V~5.2V Built-in RC oscillator 1/4 bias, 1/8 duty, frame frequency is 64Hz Max. 328 patterns, 8 commons,
RS232-B1 User Manual V1.2 05/10/2017
RS232-B1 User Manual V1.2 05/10/2017 Table of Contents 1. Introduction...2 1.1 Device Overview... 2 1.2 System Overview... 3 1.3 Features... 3 1.4 Connectors... 4 1.4.1 RS232 Connectors (J1, J2)... 4 1.4.2
PT7C4502 PLL Clock Multiplier
Features Low cost frequency multiplier Zero ppm multiplication error Input crystal frequency of 5-30 MHz Input clock frequency of 4-50 MHz Output clock frequencies up to 180 MHz Period jitter 50ps (100~180MHz)
Intelligent and passive RFID tag for Identification and Sensing
Zürich University Of Applied Sciences Institute of Embedded Systems InES Intelligent and passive RFID tag for Identification and Sensing (Presented at Embedded World, Nürnberg, 3 rd March 2009) Dipl. Ing.
TECHNICAL DATASHEET #TDAX ISOLATED DUAL CHANNEL UNIVERSAL SIGNAL CONVERTER
Preliminary TECHNICAL DATASHEET TDAX130540 ISOLATED DUAL CHANNEL UNIVERSAL SIGNAL CONVERTER 2 Analog (Bipolar), Resistive, Digital, Frequency (RPM) or PWM Signal Inputs Encoder Input Magnetic Pick Up Input
OEM 100. User Manual. Figure 1: OEM 100 Module with HG Rectangular Antenna Board
OEM 100 User Manual Figure 1: OEM 100 Module with HG Rectangular Antenna Board Revision History Revision History Release Version Date Revision Description Authors Version 1.0 07/20/09 Initial Release Bryan
HT162X HT1620 HT1621 HT1622 HT16220 HT1623 HT1625 HT1626 COM
RAM Mapping 328 LCD Controller for I/O C Features Operating voltage: 2.7V~5.2V Built-in RC oscillator 1/4 bias, 1/8 duty, frame frequency is 64Hz Max. 328 patterns, 8 commons, 32 segments Built-in internal
Speed regulation vehicles using RFID
Speed regulation vehicles using RFID Chandrashekar.P Electronics and communication engineering SDIT-Mangalore Karnataka-India Cschandran44@gmail.com Praveen kumar.m Electronics and communication engineering
LED controllers. Voltage-switch drivers, constant-current drivers, and Flash LED drivers
LED controllers - drivers, constant-current drivers, and Flash LED drivers LEDs are used in a wide range of applications, from low-end status indicators to high-end video displays. System designers often
2014 New Product. The Best Partner for your Success
2014 New Product Contents NO IK Device Package Function Compatibility Device Maker Remark 1 IK6501SD SSOP-24 3-Phase Full-Wave Sine-Wave PWM Brushless Motor Controller TB6551FAG TOSHIBA M.P. 2 IK7002 (IK301)
RFID circuit with read/write functions
RFID circuit with read/write functions IZ2803-5 The IZ2803-5 (equivalent of EM4100 EM Microelectronic Marin SA) is chip for multifunction contactless read/write cards with 64 bit EEPROM The IZ2803-5 is
PN5180 The best full NFC frontend on the market
PN5180 The best full NFC frontend on the market Public MobileKnowledge January 2016 Agenda Session 13 th January: PN5180 Introduction Positioning within the NFC portfolio and overview Target markets and
EVDP610 IXDP610 Digital PWM Controller IC Evaluation Board
IXDP610 Digital PWM Controller IC Evaluation Board General Description The IXDP610 Digital Pulse Width Modulator (DPWM) is a programmable CMOS LSI device, which accepts digital pulse width data from a
css Custom Silicon Solutions, Inc.
css Custom Silicon Solutions, Inc. GENERAL PART DESCRIPTION The is a micropower version of the popular timer IC. It features an operating current under µa and a minimum supply voltage of., making it ideal
Built-in LCD display RAM Built-in RC oscillator
PAT No. : TW 099352 RAM Mapping 488 LCD Controller for I/O MCU Technical Document Application Note Features Operating voltage: 2.7V~5.2V Built-in LCD display RAM Built-in RC oscillator R/W address auto
Index. n A. n B. n C. Base biasing transistor driver circuit, BCD-to-Decode IC, 44 46
Index n A Android Droid X smartphone, 165 Arduino-based LCD controller with an improved event trigger, 182 with auto-adjust contrast control, 181 block diagram, 189, 190 circuit diagram, 187, 189 delay()
SynthNV - Signal Generator / Power Detector Combo
SynthNV - Signal Generator / Power Detector Combo The Windfreak SynthNV is a 34.4MHz to 4.4GHz software tunable RF signal generator controlled and powered by a PC running Windows XP, Windows 7, or Android
HT /8 to 1/16 Duty VFD Controller
1/8 to 1/16 Duty VFD Controller Features Logic voltage: 3.0V~5.5V High-voltage output: V DD -35V max. Multiple display (12-segment 16-digit to 20-segment 8-digit) 124 matrix key scanning 8 steps dimmer
A 100V, 3 Phase Gate Driver with integrated digital PWM Generation and Current Sampling
A 100V, 3 Phase Gate Driver with integrated digital PWM Generation and Current Sampling Daryl Prince, Hong Xiao Agile Systems Inc. 575 Kumpf Drive, Waterloo ON Canada N2V 1K3 e-mail: DPrince@agile-systems.com
MOBILE COMPUTING 2/25/17. What is RFID? RFID. CSE 40814/60814 Spring Radio Frequency IDentification
MOBILE COMPUTING CSE 40814/60814 Spring 2017 What is RFID? Radio Frequency IDentification Who Are You? I am Product X RFID ADC (automated data collection) technology that uses radio-frequency waves to
Keywords: GPS, receiver, GPS receiver, MAX2769, 2769, 1575MHz, Integrated GPS Receiver, Global Positioning System
Maxim > Design Support > Technical Documents > User Guides > APP 3910 Keywords: GPS, receiver, GPS receiver, MAX2769, 2769, 1575MHz, Integrated GPS Receiver, Global Positioning System USER GUIDE 3910 User's
DNT900. Low Cost 900 MHz FHSS Transceiver Module with I/O
DEVELOPMENT KIT (Info Click here) 900 MHz Frequency Hopping Spread Spectrum Transceiver Point-to-point, Point-to-multipoint, Peer-to-peer and Tree-routing Networks Transmitter Power Configurable from 1
H4102 EM MICROELECTRONIC-MARIN SA. Read Only Contactless Identification Device H4102. Typical Operating Configuration
Read Only Contactless Identification Device Features 64 bit memory array laser programmable Several options of data rate and coding available On chip resonance capacitor On chip supply buffer capacitor
RW1026 Dot Matrix 48x4 LCD Controller / Driver
Features Operating voltage: 2.4V~5.5V Internal LCD Bias generation with voltage-follower buffer External resistor CR oscillator External 256k Hz frequency source input Selection of 1/2 or 1/3 bias, and
Built-in LCD display RAM Built-in RC oscillator
PAT No. : TW 099352 RAM Mapping 488 LCD Controller for I/O MCU Technical Document Application Note Features Operating voltage: 2.7V~5.2V Built-in LCD display RAM Built-in RC oscillator R/W address auto
AN NFC, PN533, demo board. Application note COMPANY PUBLIC. Rev July Document information
Rev. 2.1 10 July 2018 Document information Info Keywords Abstract Content NFC, PN533, demo board This document describes the. Revision history Rev Date Description 2.1. 20180710 Editorial changes 2.0 20171031
400 ma nano-quiescent synchronous step-down converter with digital voltage selection and Power Good
Datasheet 400 ma nano-quiescent synchronous step-down converter with digital voltage selection and Power Good Features 500 na input quiescent current at V IN =3.6 V (not switching) 94% typical efficiency
HF-RFID. References. School of Engineering
HF-RFID MSE, HF-RFID, 1 References [1] Klaus Finkenzeller, RFID-Handbuch, 5. Auflage, Hanser, 2008. [2] R. Küng, M. Rupf, RFID-Blockkurs, ergänzende MSE-Veranstaltung, ZHAW, 2011. Kontakt: ZHAW Zürcher
CATALOG. ANALOG COMMUNICATION SYSTEMS DIGITAL COMMUNICATION SYSTEMS Microcontroller kits Arm controller kits PLC Trainer KITS Regulated Power supplies
CATALOG ANALOG COMMUNICATION SYSTEMS DIGITAL COMMUNICATION SYSTEMS Microcontroller kits Arm controller kits PLC Trainer KITS Regulated Power supplies UNION INTRUMENTS #17 & 18, 4 th floor, Hanumathra Arcade
I2C Demonstration Board I 2 C-bus Protocol
I2C 2005-1 Demonstration Board I 2 C-bus Protocol Oct, 2006 I 2 C Introduction I ² C-bus = Inter-Integrated Circuit bus Bus developed by Philips in the early 80s Simple bi-directional 2-wire bus: serial
PAK-Vb/c PWM Coprocessor Data Sheet by AWC
PAK-Vb/c PWM Coprocessor Data Sheet 1998-2003 by AWC AWC 310 Ivy Glen League City, TX 77573 (281) 334-4341 http://www.al-williams.com/awce.htm V1.8 23 Oct 2003 Table of Contents Overview...1 If You Need
INTEGRATED CIRCUITS. MF RC500 Active Antenna Concept. March Revision 1.0 PUBLIC. Philips Semiconductors
INTEGRATED CIRCUITS Revision 1.0 PUBLIC March 2002 Philips Semiconductors Revision 1.0 March 2002 CONTENTS 1 INTRODUCTION...3 1.1 Scope...3 1.1 General Description...3 2 MASTER AND SLAVE CONFIGURATION...4
For Reference Only FEATURES
BiMOS II -BIT SERIAL INPUT, LATCHED SOURCE DRIVERS Data Sheet 262.4D GROUND 5 6 7 UCN55A CLOCK 2 CLK SHIFT REGISTER V DD 5 SERIAL 4 ST LATCHES OE V BB 4 OUT OUT 2 OUT OUT 4 SERIAL DATA OUT LOGIC SUPPLY
Characteristic Sym Notes Minimum Typical Maximum Units Operating Frequency Range MHz. RF Chip Rate 11 Mcps RF Data Rates 1, 2, 5.
RFM Products are now Murata products. Small Size, Light Weight, Low Cost 7.5 µa Sleep Current Supports Battery Operation Timer and Event Triggered Auto-reporting Capability Analog, Digital, Serial and
HT1620 HT1621 HT1622 HT16220 HT1623 HT1625 HT1626 HT1627 HT16270 COM
RAM Mapping 48 16 LCD Controller for I/O µc LCD Controller Product Line Selection Table HT162X HT1620 HT1621 HT1622 HT16220 HT1623 HT1625 HT1626 HT1627 HT16270 COM 4 4 8 8 8 81 16 16 16 SEG 32 32 32 32
DS1803 Addressable Dual Digital Potentiometer
www.dalsemi.com FEATURES 3V or 5V Power Supplies Ultra-low power consumption Two digitally controlled, 256-position potentiometers 14-Pin TSSOP (173 mil) and 16-Pin SOIC (150 mil) packaging available for
EM4069 EM4169 EM MICROELECTRONIC - MARIN SA. 128 bit Read/Write Contactless Identification Device with OTP function EM4069. Description.
EM MICROELECTRONIC - MARIN SA 128 bit Read/Write Contactless Identification Device with OTP function Description (previously named P4069) is a CMOS integrated circuit intended for use in electronic Read/Write
RF4432 wireless transceiver module
1. Description www.nicerf.com RF4432 RF4432 wireless transceiver module RF4432 adopts Silicon Lab Si4432 RF chip, which is a highly integrated wireless ISM band transceiver. The features of high sensitivity
High Voltage Monolithic LED Driver DESCRIPTION
DEMO CIRCUIT 1521A QUICK START GUIDE LT3956 LT3956 High Voltage Monolithic LED Driver DESCRIPTION Demonstration circuit 1521A is a high voltage monolithic LED driver with an integrated 3.3A, 84V power
REFERENCE DESIGN 4669 INCLUDES:
Maxim > Design Support > Technical Documents > Reference Designs > Display Drivers > APP 4669 Maxim > Design Support > Technical Documents > Reference Designs > LED Lighting > APP 4669 Maxim > Design Support
LC-10 Chipless TagReader v 2.0 August 2006
LC-10 Chipless TagReader v 2.0 August 2006 The LC-10 is a portable instrument that connects to the USB port of any computer. The LC-10 operates in the frequency range of 1-50 MHz, and is designed to detect
FAN5340 Synchronous Constant-Current Series Boost LED Driver with PWM Brightness Control and Integrated Load Disconnect
April 2010 FAN5340 Synchronous Constant-Current Series Boost LED Driver with PWM Brightness Control and Integrated Load Disconnect Features Synchronous Current-Mode Boost Converter Up to 500mW Output Power
NFC NUTSHELL KIT. NFC Antennas USER MANUAL REVISION 1.2. GMMC GmbH Keywords Abstract. Document information
USER MANUAL REVISION 1.2 Document information Info Keywords Abstract Content User Manual GMMC Nutshell Kit This document describes how to use of the GMMC s NFC Nutshell KIT GMMC GmbH www.gmmc-biz.com Contents
RX23T inverter ref. kit
RX23T inverter ref. kit Deep Dive October 2015 YROTATE-IT-RX23T kit content Page 2 YROTATE-IT-RX23T kit: 3-ph. Brushless Motor Specs Page 3 Motors & driving methods supported Brushless DC Permanent Magnet
Fundamentals of NFC. Jeff Fonseca Regional Sales Director, NXP Semiconductors Smart Card Alliance. All Rights Reserved.
Fundamentals of NFC Jeff Fonseca Regional Sales Director, NXP Semiconductors 2014. Smart Card Alliance. All Rights Reserved. NXP Solution Provider for a Connected World Leader in security and contactless
Index Terms-Emergency vehicle clearance, Higher density, IR sensor, Micro controller, RFID Technology.
Design of an Intelligent Auto Traffic Signal Controller with Emergency Override * Geetha.E 1, V.Viswanadha 2, Kavitha.G 3 Abstract- The main objective of this project is to design an intelligent auto traffic
Application Note. Low Power DC/DC Converter AN-CM-232
Application Note AN-CM-232 Abstract This application note presents a low cost and low power DC/DC push-pull converter based on the Dialog GreenPAK SLG46108 device. This application note comes complete
Trademarks & Copyright
Smart Peripheral Controller Neo DC Motor 1.2A Trademarks & Copyright AT, IBM, and PC are trademarks of International Business Machines Corp. Pentium is a registered trademark of Intel Corporation. Windows
MM5452/MM5453 Liquid Crystal Display Drivers
MM5452/MM5453 Liquid Crystal Display Drivers General Description The MM5452 is a monolithic integrated circuit utilizing CMOS metal gate, low threshold enhancement mode devices. It is available in a 40-pin
PART TEMP RANGE PIN-PACKAGE
General Description The MAX6922/MAX6932/ multi-output, 76V, vacuum-fluorescent display (VFD) tube drivers that interface a VFD tube to a microcontroller or a VFD controller, such as the MAX6850 MAX6853.
Low-Voltage, 1.8kHz PWM Output Temperature Sensors
19-266; Rev 1; 1/3 Low-Voltage, 1.8kHz PWM Output Temperature General Description The are high-accuracy, low-power temperature sensors with a single-wire output. The convert the ambient temperature into
TECHNICAL DATASHEET #TDAX INPUTS, 2 BIDIRECTIONAL
TECHNICAL DATASHEET TDAX024010 4 INPUTS, 2 BIDIRECTIONAL 10-400 ma OUTPUTS VALVE CONTROLLER, DIN rail mount Four Signal Inputs Two Bi-directional 10-400 ma Outputs One Reference Voltage Isolated CAN (SAE
MD04-24Volt 20Amp H Bridge Motor Drive
MD04-24Volt 20Amp H Bridge Motor Drive Overview The MD04 is a medium power motor driver, designed to supply power beyond that of any of the low power single chip H-Bridges that exist. Main features are
Study of M.A.R.S. (Multifunctional Aero-drone for Remote Surveillance)
Study of M.A.R.S. (Multifunctional Aero-drone for Remote Surveillance) Supriya Bhuran 1, Rohit V. Agrawal 2, Kiran D. Bombe 2, Somiran T. Karmakar 2, Ninad V. Bapat 2 1 Assistant Professor, Dept. Instrumentation,
DNT2400. Low Cost 2.4 GHz FHSS Transceiver Module with I/O
2.4 GHz Frequency Hopping Spread Spectrum Transceiver Point-to-point, Point-to-multipoint, Peer-to-peer and Tree-routing Networks Transmitter Power Configurable from 1 to 63 mw RF Data Rate Configurable
TECHNICAL DATASHEET #TDAX022420
TECHNICAL DATASHEET TDAX022420 Four Inputs, Two Outputs Universal Valve Controller 2 Universal Signal Inputs, Magnetic Pick Up Sensor, or Encoder Inputs 2-3A High Side, Low Side or Half-bridge Outputs
RAM Mapping 64 8 LCD Controller for I/O MCU. Built-in LCD display RAM Built-in RC oscillator
RAM Mapping 648 LCD Controller for I/O MCU PATENTED PAT No. : 099352 Technical Document Application Note Features Operating voltage: 2.7V~5.2V Built-in LCD display RAM Built-in RC oscillator R/W address
NCD1015-IC 17 February 2011 Data sheet status: Product Data. NCD1015-IC HDX RFID IC. Product data February 2011 Production 1/14
NCD1015-IC HDX RFID IC Product data February 2011 Production 1/14 NCD1015-IC HDX RFID IC 1 GENERAL DESCRIPTION The NCD1015-IC is a read/write IC to be used in HDX contact-less RFID devices for single transponder
AN2972 Application note
Application note How to design an antenna for dynamic NFC tags Introduction The dynamic NFC (near field communication) tag devices manufactured by ST feature an EEPROM that can be accessed either through
ZKit-51-RD2, 8051 Development Kit
ZKit-51-RD2, 8051 Development Kit User Manual 1.1, June 2011 This work is licensed under the Creative Commons Attribution-Share Alike 2.5 India License. To view a copy of this license, visit http://creativecommons.org/licenses/by-sa/2.5/in/
Frequently Asked Questions DAT & ZX76 Series Digital Step Attenuators
Frequently Asked Questions DAT & ZX76 Series Digital Step Attenuators 1. What is the definition of "Switching Control Frequency"? The switching control frequency is the frequency of the control signals.
HT16C23/HT16C23G RAM Mapping 56 4 / 52 8 LCD Driver Controller
RAM Mapping 56 4 / 52 8 LCD Driver Controller Features Operating voltage: 2.4 ~ 5.5V Internal 32kHz RC oscillator Bias: 1/3 or 1/4; Duty:1/4 or 1/8 Internal LCD bias generation with voltage-follower buffers