SETTOP M1 MULTIFUNCTION DEVICE ALL IN ONE GPS L1/L2/L5 3,5G USB

Transcription

1 SETTOP MULTIFUNCTION DEVICE ALL IN ONE GPS L1/L2/L5 Glonass 3,5G Router Wifi Memory Web Internet Radio Tx Rx COM Control Series Com Control USB Bluetooth Sensor Control Sensor Control Station COntrol

2 GSM 3,5G SURVEY BASE APPLICATION BASE RADIO Transmission of differential corrections via Radio and Internet (Caster). SURVEY ROVER APPLICATION ROVER Configured as a mobile device, receiving corrections via Radio or Internet (NTRIP client). GNSS MONITORING MONITORING STATIC APPLICATION MONITORING The device can be configured for carrying out monitoring tasks in order to observe deformations and movements. All of the data are sent in real time via Internet to a server that will process, analyze the data and generate alarms. Different configuration possibilities: GPS Antenna GNSS Monitoring GSM 3.5G RADIO 3D MONITORING PITCH & ROLL HEAVE APPLICATION Monitoring with Total Station Dynamic Monitoring (bridges, platforms, etc.) or Static Monitoring (slopes, buildings, etc.) Static Auscultation Monitoring Combined monitoring that employs GNSS and Total Station. IT IS POSSIBLE TO PROGRAM CUSTOMIZED APPLICATIONS 2 SETTOP

3 GSM 3.5G INFRASTRUCTURE CORS Configured as a base station for transmitting differential corrections Radio and Internet (internal caster and sending to a specific IP address) and for the storage of post-process files. INFRASTRUCTURE CORS APPLICATION GPS Antenna GPS Radio Antenna Internal Radio TK INDUSTRIAL Development of new applications in accordance with the particular specifications of a project. INDUSTRIAL VERSATILE APPLICATION AND CONTROL CONTROL OF CRANES The device is configured as a mobile receiver in combination with a crane guide application for the placement of concrete blocks. One is allowed to see the position of the block in real time by means of the data output via serial port and Internet. MARINE CRANE CONTROL PLATFORM POSITIONING The device can be configured as a mobile receiver in combination with an application for the positioning of platforms, bridges, etc. The position of the platform can be seen in real time by means of the data output via serial port and Internet. MARINE PLATFORM POSITIONING SETTOP offers flexibility so that one s customized application may work in the device BATHYMETRY Configuration as a mobile device with PPS output for synchronizing bathymetric equipment. MARINE BATHYMETRY APPLICATION GPS Antenna PPS Echo Sounder Transducer SETTOP 3

4 WHAT MAKES IT DIFFERENT? The Settop is a GNSS receiver with Total Station remote control. It makes it possible to manage GPS data while it carries out monitoring tasks with a Total Station via various communication ports such as Wi-Fi, Bluetooth, Radio, Ethernet and GSM. This flexibility and versatility make the Settop the standard reference device among monitoring applications. The hardware has been designed to function as the smallest and lightest in the market and is configurable by the user. INTEGRATED SURVEYING IN ONE SIMPLE DEVICE 4 SETTOP

5 USES Combined control of the internal GNSS receiver and a total station for monitoring works. Configurable GPS receiver as a Base, RTK Rover with transmission and reception of differential corrections via Radio, Internet and Wi-Fi. Configurable as a Caster for sending differential corrections to different customers via Internet. Control of external devices connected to its communication ports (temperature and pressure sensors, inclinometers, etc.). The possibility of adding new applications in keeping with the project requirements. Configurable by means of web interface. CHARACTERISTICS GPS L1/L2 GLONASS RTK 3.5G telephone module Web Server 2-way radio compatible with Trimtalk and Satel Bluetooth / Wi-Fi (g) USB and RS232 communication ports Switchable power supply 1Gb internal data INTERNET GSM Internet Connection TX RX Radio Module Connection to Station Control of Power Supply LED Indicators Sensor Sensor Power Supply Connection to GPS Antenna SETTOP 5

6 HOW DOES THE DEVICE WORK? The Settop has been designed for a wide variety of uses and can be configured with its intuitive web interface. The Settop contains the latest technology within the surveying and positioning sector as well as at the communication level. SPECIAL APPLICATIONS That the Settop can be adapted to all types of projects is shown by its use in the development of a complete solution for the positioning and anchoring of platforms. This solution is composed of three Settop devices connected through a network and adapted in an industrial case and a platform positioning and anchoring software. The case contains three connectors for the GPS antenna, a radio antenna connector, an RJ45 connector and a power supply connector. The connection to the Settop devices is carried out through a network and the differential corrections are received via radio. The software developed by Settop provides information in real time on all the data needed for the anchoring: positioning, direction, balancing and pitch of the caisson, etc. It is possible to load horizontal alignments, digital terrain models (DTM) and background files. All data generated during the anchoring can be stored in a file and subsequently reproduced. It can be configured as follows: Base Configuration (Reference Station): It is possible to enter the known base coordinates (whether projected or geodetic). One may connect more than one instrument to the caster to receive the differential corrections. It also makes it possible to store post-process data in its internal memory. Mobile Configuration: This allows it to function as a Rover equipment with a data collector and the Settop GPS application, with the possibility of collecting data, staking out horizontal and vertical alignments, etc. The differential corrections can be obtained via radio or Internet by means of the connection to a caster. Combined configuration for monitoring (GPS + Total Station): This makes it possible to collect GPS data while carrying out the control of a Total Station which is performing sequential measurement tasks in order to observe deformations and movements. All of the data are sent in real time and via Internet to a server that will carry out the analysis. As it has a L1 L2 Glonass receiver, it is possible to install the total station in the area being monitored if our instrument has been moved and calculate its new coordinates. Adapted configuration: It is possible to add new applications to the equipment on the basis of the specific requirements of a project. Contact SETTOP for the development of new applications to be embedded in the equipment. 6 SETTOP

7 SOFTWARE VIA INTERNET The has been designed to be configured via a web browser. Therefore, it does not require any software installation in the computer and we can connect to its web interface via a local network or via Internet. The user interface is amazingly easy to use and provides the user with all the information on their instrument. The web has been divided into two basic parts: system information and system configuration. 1 2 Scrolling through the icons on the left (1), we can control both the configuration of our equipment (GPS, Total Station, Radio, etc.) and the successive events taking place at any moment. In order to modify our equipment, we need only select the device we want to modify, and all of its configuration possibilities will appear in the central frame of the screen. On the upper part (2), we can display the configuration status of our equipment: Base/ Rover mode, GPS solution (Autonomous, DGPS, RTK Fix), connection type (Wi-Fi, Ethernet, Modem) and battery level. SETTOP 7

8 Product Specifications: GPS 220 Channels : - GPS: Simultaneous L1 C/A, L2E,L2C, L5 - GLONASS: Simultaneous L1 C/A, L1 P, L2 C/A (GLONASS M Only), L2 P - SBAS: Simultaneous L1 C/A, L5 - GIOVE-A: Simultaneous L1 BOC, E5A, E5B, E5AltBOC 1 - GIOVE-B: Simultaneous L1 CBOC, E5A, E5B, E5AltBOC 1 - GALILEO: Disabled 2 Advanced Trimble Maxwell 6 Custom Survey GNSS Technology High precision multiple correlator for GNSS pseudorange Unfiltered, unsmoothed pseudorange measurements data for low noise, low multipath error, low time domain correlation and highdynamic response Very low noise GNSS carrier phase measurements with <1mm precision in a 1 Hz bandwidth Signal-to-Noise ratios reported in db-hz Proven Trimble low elevation tracking technology Initialization time 3 : typically <10 seconds Initialization reliability 3 : > 99.9 % 1 Hz, 2 Hz, 5 Hz, 10 Hz, 20 y 50 Hz positioning outputs (depends on installed option) Up to 50 Hz raw measurement & position outputs Reference outputs: CMR, CMR+, RTCM 2.1, 2.2, 2.3, 3.0, 3.1 Navigation outputs ASCII: NMEA-0183 GSV, AVR, RMC, HDT, VGK, VHD, ROT, GGK, GGA, GSA, ZDA, VTG, GST, PJT, PJK, BPQ, GLL, GRS, GBS and Binary: Trimble GSOF Positioning Specifications Mode Accuracy 4 Latency 5 Max. Rate Single Baseline RTK (<30Km) DGPS 8 mm + 1ppm H. 15 mm + 1ppm V m + 1ppm H m + 1ppm V. <20 ms <20 ms 50 Hz 50 Hz SBAS6 < 5m 3D <20 ms 50 Hz COMMUNICATION PORTS 1 RS232/USB Host Event port, PPS Power In/Out 2 RS232/USB OTG port Power In/Out 1 TNC connector for GPS antenna 1 TNC connector for rodio antenna 1 FME connector for GSM antenna 1 Slot SIM card 1 Slot MicroSD card ELECTRICAL AND OPERATING REQUIREMENTS External Power: 12 30V AC. Power: - All components activated at full power: 12.8W - GSM reception mode: 5.6W - GSM mode & radio off: 3.6W Operating temperature -40º a 75º C Storage temperature -55º a 85º C Random vibe MIL-STD 810F (7.7g RMS) Vibe SAEJ1211 (4g) Bump/Shock IEC (30g) IP cm 13.8 cm 13.8 cm 13.8 cm CONNECTIONS Radio Module Bandwidth Mhz Mhz Frequency Control Synthesized 12.5 khz resolution setting Frequency Stability ± 1 ppm 12.5/25 khz Channel Spacing (detectable) RF Transmitter Output 0.0 w (RX-only) y w (Programmable) Sensibility: -110 dbm VER = 1 x 10-5 Adjacent Channel Sensitivity: > 55 db Certification type All models are accepted and certified to operate in the U.S., Australia and Canada FCC, IC, EU, NZ, Australia ETS GSM HSDPA modem (3,5G) Dual Band UMTS: 900 / 2100 MHz (EU3-E) Five-Band UMTS: 800 / 850 / 900 / 1900 / 2100 MHz (PH8-P) Dual Band GSM: 900 / 1800 MHz HSDPA data: DL : max. 3.6 Mbps, UL: max. 384 kbps UMTS data: DL: max. 384 kbps, UL: max. 384 kbps EDGE data: DL: max. 237 kbps, UL: max. 118 kbps GPRS data: DL: max. 86 kbps, UL: max. 43 kbps GSM/CSD data transmission: 14.4 kbps WiFi IEEE b/g Bluetooth ERD (Enhanced Data Rate) wireless technology. SIZE AND WEIGHT 1 Frontal Panel with 10 LED status indicators Size: - Width: 13.8 cm - Depth: 13.8 cm - Height: 3.5 cm Weight: 0.6Kg ACCESORIES AND OPTIONS Power cable 2 meters Clip for tripod External power font GSM Antenna Radio Antenna GPS Coaxial cable USB cable Serial cable Optional: USB to RJ45 adapter 1.Galileo GIOVE-A and GIOVE-B test satellite support uses information that is unrestricted in the public domain and is intended for signal evaluation and test purposes 2.The hardware complies with Galileo OS SIS ICD, Issue 1, Rev 1, Sep2010. Commercial sale of Galileo technology requires Trimble to acquire a Commercial license from the EU. At the time of writing there is no process for obtaining a license. Therefore, to comply with the ICD Copyright/ IPR terms, all Galileo firmware/hardware functionality has been disabled. Depending upon the terms of the license, an upgrade to full Galileo (L1 CBOC, E5A, E5B, E5AltBOC) may be offered. This will require an additional fee. 3.May be affected by atmospheric conditions, signal multipath, and satellite geometry. Initialization reliability is continuously monitored to ensure the highest quality 4. 1 sigma level, when using Trimble Zephyr 2 antennas 5. At maximum output rate 6. Depends on SBAS system performance All brands, products and images appearing in this catalog are the trademark and/or copyright of their owners. Todas las marcas, productos e imágenes aparecidos en este catálogo, son marca registrada y/o copyright de sus propietarios. SETTOPSURVEY, S.L. Bofarull 14, Barcelona (Spain) Phone: (+34) Fax: (+34) info@settopsurvey.com