AC Line Rated Disc Capacitors Class X1, 400 VAC/Class Y2, 300 VAC

Transcription

1 AC Line Rated isc Capacitors Class X, VAC/Class Y, VAC LV Series LO =.3" (3.4 mm) typ. INSULAION RESISANCE Min. ΩF OLERANCE ON CAPACIANCE ± %; ± %.5" (3. mm) ISSIPAION FACOR. % at khz; V." min. (3 mm) inned Copper Leads CERAMIC IELECRIC CG, UJ, P3K, R3L (Class ) X7R, Y5U (Class ) CAEGORY EMPERAURE RANGE - 5 C to + 5 C CLIMAIC CAEGORY ACC. O EN668-5/5/ OPERAING EMPERAURE RANGE - C to + 5 C LO FEAURES Worldwide safety agency recognition Underwriters laboratories - UL44 and UL83 Canadian standards association - CSA. European EN3 to IEC second edition Complete range of capacitance values Radial leads Compliant to RoHS directive /95/EC APPLICAIONS Required in AC Power Supply and Filter Applications Specific Industry Requirements ESIGN he capacitors consist of a ceramic disc of which both sides are silver-plated. Connection leads are made of tinned copper having a diameter of.3" (.8 mm) or.5" (.64 mm). he capacitors may be supplied with radial kinked or straight leads having a lead spacing of.375" (9.5 mm) or." (6.4 mm). he standard tolerance is ± %. Coating is made of flame retardant epoxy resin in accordance with UL 94 V-. CAPACIANCE RANGE pf to.5 µf RAE VOLAGE IEC : IEC : UL 44: UL 83: CSA. No.: CSA. No.8: (Y): VAC, Hz (X): VAC, Hz VAC, 6 Hz VAC, 6 Hz VAC, 6 Hz VAC, 6 Hz IELECRIC SRENGH BEWEEN LEAS Component test: VAC, Hz, s As repeated test admissible only once with: VAC, Hz, s Random sampling test (destructive test): VAC, Hz, 6 s IELECRIC SRENGH OF BOY INSULAION VAC, Hz, 6 s (destructive test) ocument Number: 33 For technical questions, contact: ceramitesupport@vishay.com Revision: 4-Jun-9

2 LV Series AC Line Rated isc Capacitors Class X, VAC/Class Y, VAC ORERING INFORMAION, CERAMIC X/Y CAPACIORS LV C (pf) OL. (%) IAMEER HICKNESS WIRE SIZE Notes. Alternate lead spacings of 7.5 mm and mm are available bulk or tape and reel on request.. European required minimum lead clearance (prevents use of inside crimp).8" (3 mm) 3. ype LVS5 not available with UL 44 recognition. LEA SPACE ORERING COE AWG CG ± %.3 (8.4).85 (4.7).5 (.64). (6.4) LVQ-R UJ 5 ± %.3 (8.4). (5.).5 (.64). (6.4) LVQ5-R P3K ± %.3 (8.4).8 (4.6).5 (.64). (6.4) LVQ-R R3L 33 ± %.3 (8.4).9 (4.8).5 (.64). (6.4) LVQ33-R 47 ± %.3 (8.4).7 (4.3).5 (.64). (6.4) LVQ47-R S3L 68 ± %.3 (8.4).75 (4.4).5 (.64). (6.4) LVQ68-R X7R.3 (8.4).8 (4.6) LV-R.3 (8.4).8 (4.6) LV5-R.3 (8.4).95 (5.) LV-R 3.3 (8.4).95 (5.) LV33-R 47 ± %.3 (8.4).8 (4.6).5 (.64). (6.4) LV47-R 56.3 (8.4). (5.) LV56-R 68.3 (8.4).8 (4.6) LV68-R.365 (9.3).85 (4.7) LV-R.46 (.7).8 (4.6) LV5-R Y5U 68.3 (8.4). (5.6) LV68-R.3 (8.4).5 (5.5) LV-R.3 (8.4).95 (5.) LV5-R. (.). (5.3) LV-R. (.). (5.) LV-R 7.4 (.9). (5.).5 (.64). (6.4) LV7-R 8.4 (.9). (5.) LV8-R.46 (.7).5 (5.) LV-R.46 (.7). (5.) LV3-R 3.46 (.7).95 (5.) LV33-R 39 ± %.49 (.4). (5.) LV39-R.5 (3.5). (5.3) LV-R 47.6 (5.7). (5.6) LV47-R.6 (5.7).5 (5.5) LV-R 5.56 (4.).95 (5.) LV55-R (4.).95 (5.) LV56-R (7.3).5 (5.).3 (.8).375 (9.5) LV68-R 8.68 (7.3).95 (5.) LV8-R 9.7 (8.3). (5.) LV9-R. µf.79 (.).9 (4.8) LVS-R.5 µf.9 (.9). (5.) LVS5-R APE AN REEL OPIONS o specify tape and reel, add two letter suffix to the ordering code (for details of the packaging code see general section of the catalog) Optional 3-leaded Style An optional 3-leaded construction is available. It consists of a single capacitor with the two outside leads attached to one electrode, and the center lead attached to the electrode. Used in feed-thru or line-to-ground applications, it allows a short ground lead for enhanced high frequency performance. a G G a 4 mm b c b." min. (3 mm) For technical questions, contact: ceramitesupport@vishay.com ocument Number: 33 Revision: 4-Jun-9

3 AC Line Rated isc Capacitors Class X, VAC/Class Y, VAC LV Series LEAKAGE CURREN VS. VOLAGE (YPICAL) INSERION LOSS VS. FREQUENCY (YPICAL) LVQ68-R LVQ47-R LVQ33-R LVQ-R LVQ5-R LVQ-R LVQ68-R LVQ47-R LVQ33-R LVQ-R LVQ5-R LVQ-R LV5-R.5.5 LV-R LV5-R LV-R LV-R LV68-R LV56-R LV47-R LV33-R LV5-R LV-R LV68-R LV56-R LV-R LV5-R LV-R LV33-R LV47-R.5.5 LV33-R LV3-R LV-R LV8-R LV7-R LV-R LV-R LV5-R LV-R LV68-R LV33-R LV3-R LV-R LV8-R LV7-R LV68-R LV-R LV5-R LV-R LV-R LVS5-R LVS-R LV9-R LV8-R LV68-R LV56-R LV55-R LV-R LV47-R LVS5-R LVS-R LV9-R LV8-R LV68-R LV39-R LV-R LV47-R LV-R LV55-R LV56-R. ocument Number: 33 For technical questions, contact: ceramitesupport@vishay.com Revision: 4-Jun-9 3

4 LV Series AC Line Rated isc Capacitors Class X, VAC/Class Y, VAC APPROVA IEC / nd Issue (993) incl. Am. (995) - Safety ests EN3 (994) - Safety ests hat approval together with CB est Certificate substitutes the national approval of the following nations: Belgium France Italy Austria China Japan Spain enmark Greece Luxembourg Portugal Singapore Poland United Kingdom Germany Ireland Netherlands Sweden Slovenia Hungaria Czech Republic Finland Iceland Norway Switzerland Korea Israel Y Capacitor: CB-est Certificate: E pf....5 µf V AC X Capacitor: CB-est Certificate: E pf....5 µf V AC UNERWRIERS LABORAORIES INC. UL 44 Across-the-line, Antenna-coupling and Line-by-pass component pf.... µf Agency File/License E9964 VS V AC UL 83 EMI Filters pf....5 µf Agency File/License E9964 VS V AC CANAIAN SANARS ASSOCIAION CSA C. Across-the-line, Isolation capacitor pf....5 µf No. Agency File/License LR 66- V AC No. 8 Line-to-ground capacitor pf....5 µf Agency File/License LR 66- V AC Note UL44 Across-he-Line, Antenna Coupling, and Line-By-Pass Capacitors: Across-he-Line - A capacitor connected either across a supply circuit or between one side of a supply circuit and a conductive part that may be connected to earth ground. Antenna-Coupling - A capacitor connected from an antenna terminal to circuits within an appliance. Line-By-Pass - A capacitor connected between one side of a supply circuit and an accessible conductive part Note IEC Subclass Y Capacitors: A capacitor of a type suitable for use in situations where failure of the capacitor could lead to danger of electric shock. Class Y capacitors are divided into sub- classes based on type of insulation bridged and voltage ranges. For definitions of basic, supplementary, double and reinforced insulation, see IEC Publication 536. Subclass Y capacitors may be used in applications which require a Subclass X rating. Note 3 IEC Subclass X Capacitors: A capacitor of a type suitable for use in situations where failure of the capacitor in situations where failure of the capacitor would not lead to danger of electric shock. Class X capacitors are divided into subclasses according to the peak impulse test voltage superimposed on the main voltage MARKING Sample K LV 5 C Y ~ X ~ CM For technical questions, contact: ceramitesupport@vishay.com ocument Number: 33 4 Revision: 4-Jun-9

5 Legal isclaimer Notice Vishay isclaimer ALL PROUC, PROUC SPECIFICAIONS AN AA ARE SUBJEC O CHANGE WIHOU NOICE O IMPROVE RELIABILIY, FUNCION OR ESIGN OR OHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. o the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under irective /65/EU of he European Parliament and of the Council of June 8, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS irective /95/EC. We confirm that all the products identified as being compliant to irective /95/EC conform to irective /65/EU. Revision: -Mar- ocument Number: 9