Code Reader 2500 and Code Reader 3500 User Manual Appendix Appendix C - CR2500 and CR3500 Programming Code Matrix

Transcription

1 Code Reader 2500 and Code Reader 3500 User Manual Appendix Appendix C - CR2500 and CR3500 Programming Code Matrix C004675_AB_CR2500_CR3500_User Guide_Appendix _C 1

2 Table of Contents Batch Settings Batch Send & Buffer Mode - Default... 9 (A1) Batch - Log Only Mode... 9 (A2) Batch - Send & Log Mode... 9 (A3) Batch - Transfer All Data in Memory... 9 (A4) Batch - Transfer Only Unsent Data in Memory...9 (B1) Batch - Delete Scanned Data from Memory... 9 (B2) Batch - Enable Auto Transfer Buffer Memory... 9 (B3) Batch - Disable Auto Transfer Buffer Memory... 9 (B4) RS Batch-Cable Detect - Default... 9 (C1) RS Cabled - No Power... 9 (C2) USB Settings USB Keyboard Mode... 9 (C3) USB Downloader Mode... 9 (C4) USB Virtual COM One Way Mode... 9 (D1) USB Native Two Way Mode... 9 (D2) USB HID POS (Terminal 1D 131)... 9 (D3) Reset to USB Factory Defaults... 9 (D4) PS/2 Settings PS/2 Mode... 9 (E1) Reset to PS/2 Factory Defaults... 9 (E2) RS-232 Settings RS-232 One Way Mode... 9 (E3) RS-232 Two Way Mode... 9 (E4) Reset to RS-232 Factory Defaults... 9 (F1) - 7 Data Bits... 9 (F2) - 8 Data Bits - Default... 9 (F3) Baud Rate (A1) Baud Rate (A2) Baud Rate (A3) Baud Rate (A4) Baud Rate (B1) Baud Rate (B2) Baud Rate - Default (B3) Baud Rate (B4) - Even Parity (C1) - Odd Parity (C2) - No Parity - Default (C3) Cabled Reader Time Out Settings Cabled Reader Active Time Out 2 Hours - Default (D1) Cabled Reader Time Out - Never (D2) RF/Bluetooth Communication RF Bluetooth Standard Reliability Mode (max range) (D3) RF Bluetooth Standard Reliability Mode (max reliability) (D4) RF Two Way Mode (E1) Reset to RF Factory Defaults (E2) C004675_AB_CR2500_CR3500_User Guide_Appendix C 2

3 Table of Contents Bluetooth - Radio Auto Connect On - Default (E3) Bluetooth - Radio Auto Disconnect On (E4) Bluetooth - Radio Auto Connect Off (F1) Bluetooth - Radio Auto Disconnect Off - Default (F2) Bluetooth - Radio Time Out 90 Sec. - Default (F3) Bluetooth - Radio Time Out - 5 Min (F4) Bluetooth - Radio Time Out - 10 Min (A1) Bluetooth - Radio Time Out - 15 Min (A2) Bluetooth - Radio Time Out - 30 Min (A3) Bluetooth - Radio Time Out - 1 Hour (A4) Bluetooth - Radio Time Out - 2 Hours (B1) Bluetooth Radio - Out of Range Beep - On (B2) Bluetooth Radio - Out of Range Vibrate - On (B3) Bluetooth Radio - Out of Range Beep & Vibrate On (B4) Bluetooth Radio - Out of Range Beep & Vibrate Off (C1) Bluetooth Radio Disconnect (C2) Bluetooth Enable Auto Save (C3) Bluetooth Disable Auto Save - Default (C4) Bluetooth Connection Options Disable Bluetooth Connection in Charging Cradle...11 (D1) Enable Bluetooth Connection in Charging Cradle...11 (D2) Global (All) Trigger Optimization and Settings Global Trigger Optimization SXGA - Both Fields (D3) Global Trigger Optimization SXGA - High Density Field (D4) Global Trigger Optimization SXGA - Wide Field (E1) Left Trigger Optimization and Settings Left Trigger Optimization SXGA - Both Fields (E2) Left Trigger Optimization SXGA - High Density Field (E3) Left Trigger Optimization SXGA - Wide Field (E4) Left Trigger - Take Picture (F1) Right Trigger Optimization and Settings Right Trigger Optimization SXGA - Both Fields (F3) Right Trigger Optimization SXGA - High Density Field (F4) Right Trigger Optimization SXGA - Wide Field (A1) Right Trigger - Take Picture (A2) Handle Trigger Optimization and Settings Handle Trigger Optimization SXGA - Both Fields (A3) Handle Trigger Optimization SXGA - High Density Field (A4) Handle Trigger Optimization SXGA - Wide Field (B1) Handle Trigger - Take Picture (B2) Continous Trigger Optimization and Settings Continous Trigger Optimization SXGA - Both Fields (B3) Continous Trigger Optimization SXGA - High Density Field (B4) Continous Trigger Optimization SXGA - Wide Field (C1) C004675_AB_CR2500_CR3500_User Guide_Appendix _C 3

4 Table of Contents Continuous Scan - Both Imagers (C2) Continuous Scan - Off - Default (C3) Continous Scan Time Out Cabled - 2 hours - Default (C4) Continous Scan Time Out Cabled - Always (D1) Continous Scan Time Out Uncabled - 5 minutes - Default (D2) Continous Scan Time Out Uncabled - 15 minutes (D3) Continous Scan Time Out Uncabled - 30 minutes (D4) Continuous Scan Trigger Delay (0 Sec.) - Default (E1) Continuous Scan Trigger Delay (1 Sec.) (E2) Continuous Scan Trigger Delay (3 Sec.) (E3) Continuous Scan Duplicate Scan Delay (0 Sec.) - Default (E4) Continuous Scan Duplicate Scan Delay (1 Sec.) (F1) Continuous Scan Duplicate Scan Delay (3 Sec.) (F2) Factory Default Settings Reset to USB Factory Defaults (F3) Reset to PS/2 Factory Defaults (F4) Reset to RS-232 Factory Defaults (A1) Reset to RF One Way Factory Defaults (A2) Clear All CodeXML Rules (A3) Symbologies Aztec On (B1) Aztec Off - Default (B2) Codabar On - Default (B3) Codabar Off (B4) Codablock F On (C1) Codablock F Off - Default (C2) Code 11 Off (C3) Code 11 On - Default (C4) Code 11 - Checksum 1 digit (D1) Code 11 - Checksum 2 digit & Strip from Result (D2) Code 11 - Checksum 1 digit & Strip from Result (D3) Code 39 On - Default (E1) Code 39 Off (E2) Code 39 Enable Checksum (E3) Code 39 Disable Checksum - Default (E4) Code 39 Enable Checksum and Strip (F1) Code 39 Extended Full ASCII On (F2) Code 39 Extended Full ASCII Off - Default (F3) Code 39 Short Margin On - Default (F4) Code 39 Short Margin Off (A1) Code 39 Trioptic On (A2) Code 39 Trioptic Off (A3) Code 93 On - Default (A4) Code 93 Off (B1) Code 128 On - Default (B2) Code 128 Off (B3) C004675_AB_CR2500_CR3500_User Guide_Appendix C 4

5 Table of Contents Code 128 Short Margin On - Default (B4) Code 128 Short Margin Off (C1) Composite On (C2) Composite Off - Default (C3) Data Matrix Rectangle On (C4) Data Matrix Rectangle Off - Default (D1) Data Matrix Inverse On (D2) Data Matrix Inverse Off - Default (D3) Enable improved reading capability for hard to decode Data Matrix symbols - Default (D4) Disable improved reading capability for hard to decode Data Matrix symbols...14 (E1) Int 2 of 5 On - Default (E2) Int 2 of 5 Off (E3) Int 2 of 5 2 Digits On (E4) Int 2 of 5 2 Digits Off - Default (F1) Int 2 of 5 4 Digits On (F2) Int 2 of 5 4 Digits Off...14 (F3) Int 2 of 5 with Control Character Stripped (F4) Maxicode On (A1) Maxicode Off - Default (A2) Matrix 2 of 5 On (A3) Matrix 2 of 5 Off - Default (A4) Micro PDF417 On (B1) Micro PDF417 Off - Default (B2) MSI Plessy On (B3) MSI Plessy Off - Default (B4) Macro PDF 417 On (C1) Macro PDF 417 Off - Default (C2) NEC 2 of 5 On (C3) NEC 2 of 5 Off - Default (C4) Disable OCR - Default (D1) Enable OCR (D2) PDF 417 On - Default (D3) PDF 417 Off (D4) Postal Codes - Australian Post On (E1) Postal Codes - Japan Post On (E2) Postal Codes - KIX On (E3) Postal Codes - Postnet On...15 (E4) Postal Codes - Planet On...15 (F1) Postal Codes - Planet & Postnet On (F2) Postal Codes - Royal Mail On (F3) Postal Codes - 4 State CB On (intelligent mail)...15 (F4) Postal Codes - All Postal Codes Off - Default (A1) QR Code On (A2) QR Code Off - Default (A3) QR Code Enable Checksum (A4) QR Code Disable Checksum (B1) QR Code Inverse and Standard On (B2) QR Code Inverse On...16 (B3) Enable All QR Code On (B4) Inverse and Micro QR Code On (C1) C004675_AB_CR2500_CR3500_User Guide_Appendix _C 5

6 Table of Contents RSS Limited On (formerly RSS - Now GS1 DataBar) (C3) RSS 14 & RSS Truncated On (formerly RSS - Now GS1 DataBar) (C4) RSS 14 Stacked On (formerly RSS - Now GS1 DataBar) (D1) RSS Expanded On (formerly RSS - Now GS1 DataBar) (D2) All RSS On (formerly RSS - Now GS1 DataBar) (D3) All RSS Off - Default (formerly RSS - Now GS1 DataBar) (D4) Telepen - On -Default (E1) Telepen - Off (E2) UPC On - Default (E3) UPC Off (E4) UPC Short Margin Enabled - Default (F1) UPC Short Margin Disabled (F2) UPC Extension On - Default (F3) UPC Extension Off (F4) Reader Feedback Vibrate On Beep On (A1) Vibrate On Beep Off (A2) Vibrate Off Beep On - Default (A3) Beep - Off (A4) Beep - Low (B1) Beep - High - Default (B2) Lock Out Link Lockout Link Mode...17 (B3) Unlock Link Mode...17 (B4) Targeting Settings Targeting - On - Default (C1) Targeting - Off (C2) Reader Power Off Settings Reader Power Off - 1 Hour (D2) Reader Power Off - 2 Hours Default (D3) Reader Power Off - 4 Hours (D4) Symbol Readability Index Readability Index Output Enabled (E1) Readability Index Output Disabled - Default (E2) Code Readability Index Rule (F4) Miscellaneous Settings Reader ID and Firmware Version (F2) Reader Settings Locked (A1) Reader Settings Unlocked (A2) Keyboard Mapping US English Keyboard Mapping - Default No Leading (A3) C004675_AB_CR2500_CR3500_User Guide_Appendix C 6

7 Table of Contents US English Keyboard Mapping - Leading (A4) Alt + Keypad Numbers (B1) Custom Keyboard Mapping (B2) French Keyboard (B3) German Keyboard (B4) Japanese Keyboard (C1) Control Characters for Non Printable ASCII (C2) Universal Keyboard Mapping (C3) Operating System Settings Enable Alternative OS (Windows CE/MAC/Linux) (C4) Disable Alternative OS (D1) Targeting Zone Tolerances Targeting Zone Tolerances (200) (E3) Targeting Zone Tolerances (400) (E4) Targeting Zone Tolerances (1600) (F1) Decode Optimization Optimize Decode Zone 1-D Only (1024 x 200) (F2) Optimize Decode Zone Small 2-D (480 x 480) (F3) Optimize Decode Zone Medium 2-D (512 x 512) (F4) Optimize Decode Zone Large 2-D (640 x 640) (A1) Optimize Decode Zone Reset to Default (1024 x 640) (A2) Mirroring Settings Mirroring - On (A3) Mirroring - Off Default (A4) Prefix/Suffix Settings Prefix - Comma (B1) Prefix - Space (B2) Prefix - Tab (USB Keyboard Mode ONLY) (B3) Prefix - Tab (RS-232 Mode ONLY) (B4) Prefix - Erase/None (C1) Prefix - CRLF (C2) Suffix - Carriage Return (C3) Suffix - Comma (C4) Suffix - Line Feed (D1) Suffix Carriage Return Line Feed (D2) Suffix - Space (D3) Suffix - Enter (D4) Suffix - Tab (USB Keyboard Mode ONLY) (E1) Suffix - Tab (RS-232 Mode ONLY) (E2) Suffix - Erase/None - Default (E3) Erase Prefix & Suffix Data (E4) Reader Text Commands Reader Text Commands On (F1) Reader Text Commands Off - Default (F2) C004675_AB_CR2500_CR3500_User Guide_Appendix _C 7

8 Table of Contents Factory Default and Reset Codes Reset to USB Factory Defaults (F3) Reset to PS/2 Factory Defaults (F4) Reset to RS-232 Factory Defaults (A1) Reset to RF One Way Factory Defaults (A2) Bootloader Mode (A3) Clear All CodeXML Rules (B1) Clear All Stored Data (B2) Save Settings (B3) Motion Detection Scanning Motion Detection Scanning On (B4) Motion Detection Off (C1) CR Backlight CR Backlight Intensity Low (C2) CR Backlight Intensity Medium - Default (C3) CR Backlight Intensity High (C4) CR Backlight Off (D1) CR Backlight Off 3 Seconds - Default (D2) CR Backlight Off 6 Seconds (D3) CR Backlight Off 10 Seconds (D4) Anti-Glare Enable Anti-Glare - Default (E1) Disable Anti-Glare...20 (E2) C004675_AB_CR2500_CR3500_User Guide_Appendix C 8

9 Batch Send & Buffer Mode - Default Batch - Log Only Mode Batch - Send & Log Mode Batch - Transfer All Data in Memory Batch - Transfer Only Unsent Data in Memory Batch - Delete Scanned Data from Memory Batch - Enable Auto Transfer Buffer Memory Batch - Disable Auto Transfer Buffer Memory RS Batch-Cable Detect - Default RS Cabled-No Power USB Keyboard Mode USB Downloader Mode USB Virtual COM 1 Way Mode USB Native Two Way Mode USB HID POS (Terminal ID 131) Reset to USB Factory Defaults PS/2 Mode Reset to PS/2 Factory Defaults RS-232 One Way Mode RS-232 Two Way Mode Reset to RS-232 Factory Defaults 7 Data Bits 8 Data Bits - Default C004675_AB_CR2500_CR3500_User Guide_Appendix _C 9

10 1200 Baud Rate 2400 Baud Rate 4800 Baud Rate 9600 Baud Rate Baud Rate Baud Rate Baud Rate - Default Baud Rate Even Parity Odd Parity No Parity - Default Cabled Reader Active Time Out 2 Hours Cabled Reader Time Out Never (Default) RF Bluetooth Standard Reliability Mode (max range) RF Bluetooth Standard Reliability Mode (max reliability) RF Two Way Mode Reset to RF Factory Defaults Bluetooth - Radio Auto Connect On - Default Bluetooth - Radio Auto Disconnect On Bluetooth - Radio Auto Connect Off Bluetooth - Radio Auto Disconnect Off - Default Bluetooth - Radio Time Out 90 Sec. - Default Bluetooth - Radio Time Out - 5 Min. C004675_AB_CR2500_CR3500_User Guide_Appendix C 10

11 Bluetooth - Radio Time Out - 10 Min. Bluetooth - Radio Time Out - 15 Min. Bluetooth - Radio Time Out - 30 Min. Bluetooth - Radio Time Out - 1 Hour Bluetooth - Radio Time Out - 2 Hours Bluetooth Radio - Out of Range Beep - On Bluetooth Radio - Out of Range Vibrate - On Bluetooth Radio - Out of Range Beep & Vibrate On Bluetooth Radio - Out of Range Beep & Vibrate OFF Bluetooth Radio Disconnect Enable Auto Save Disable Auto Save (Default) Disable Bluetooth connection in Charging Cradle Enable Bluetooth Connection in Charging Cradle Global Trigger Optimization SXGA - Both Fields Global Trigger Optimization SXGA - High Density Field Global Trigger Optimization SXGA - Wide Field Left Trigger Optimization SXGA - Both Fields Left Trigger Optimization SXGA - High Density Field Left Trigger Optimization SXGA - Wide Field Left Trigger - Take Picture Right Trigger Optimization SXGA - Both Fields Right Trigger Optimization SXGA - High Density Field C004675_AB_CR2500_CR3500_User Guide_Appendix _C 11

12 Right Trigger Optimization SXGA - Wide Field Right Trigger - Take Picture Handle Trigger Optimization SXGA - Both Fields Handle Trigger Optimization SXGA - High Density Field Handle Trigger Optimization SXGA - Wide Field Handle Trigger - Take Picture Continous Trigger Optimization SXGA - Both Fields Continous Trigger Optimization SXGA - High Density Field Continous Trigger Optimization SXGA - Wide Field Continuous Scan - Both Imagers Continuous Scan - Off Default Continous Scan Time Out Cabled - 2 hours Default Continous Scan Time Out Cabled - Always Continous Scan Time Out Uncabled - 5 minutes - Default Continous Scan Time Out Uncabled - 15 minutes Continous Scan Time Out Uncabled - 30 minutes Continuous Scan Trigger Delay (0 Sec.) Default Continuous Scan Trigger Delay (1 Sec.) Continuous Scan Trigger Delay (3 Sec.) Continuous Scan Duplicate Scan Delay (0 Sec.) - Default Continuous Scan Duplicate Scan Delay (1 Sec.) Continuous Scan Duplicate Scan Delay (3 Sec.) Reset to USB Factory Defaults Reset to PS/2 Factory Defaults C004675_AB_CR2500_CR3500_User Guide_Appendix C 12

13 Reset to RS-232 Factory Defaults Reset to RF One Way Factory Defaults Clear All CodeXML Rules Aztec On Aztec Off - Default Codabar On - Default Codabar Off Codablock F On Codablock F Off - Default Code 11 Off Code 11 On - Default Code 11 - Checksum 1 digit Code 11 - Checksum 2 digit & Strip from Result Code 11 - Checksum 1 digit & Strip from Result Code 39 On - Default Code 39 Off Code 39 Enable Checksum Code 39 Disable Checksum - Default Code 39 Enable Checksum and Strip Code 39 Extended Full ASCII On Code 39 Extended Full ASCII Off - Default Code 39 Short Margin On - Default C004675_AB_CR2500_CR3500_User Guide_Appendix _C 13

14 Code 39 Short Margin Off Code 39 Trioptic On Code 39 Trioptic Off Code 93 On - Default Code 93 Off Code 128 On - Default Code 128 Off Code 128 Short Margin On - Default Code 128 Short Margin Off Composite On Composite Off - Default Data Matrix Rectangle On Data Matrix Rectangle Off - Default Data Matrix Inverse On Data Matrix Inverse Off - Default Enable improved reading capability for hard to decode datamatris symbols - Default Disable improved reading capability for hard to decode datamatrix symbols - Default Int 2 of 5 On - Default Int 2 of 5 Off Int 2 of 5 2 Digits On Int 2 of 5 2 Digits Off - Default Int 2 of 5 4 Digits On Int 2 of 5 4 Digits Off Int 2 of 5 with Control Character Stripped C004675_AB_CR2500_CR3500_User Guide_Appendix C 14

15 Maxicode On Maxicode Off - Default Matrix 2 of 5 On Matrix 2 of 5 Off Default Micro PDF417 On Micro PDF417 Off - Default MSI Plessy On MSI Plessy Off - Default Macro PDF 417 On Macro PDF 417 Off - Default NEC 2 of 5 On NEC 2 of 5 Off - Default Disable OCR - Default Enable OCR PDF 417 On - Default PDF 417 Off Postal Codes Australian Post On Postal Codes Japan Post On Postal Codes KIX On Postal Codes Postnet On Postal Codes Planet On Postal Codes Planet & Postnet On Postal Codes Royal Mail On 4-State CB On (Intelligent Mail) C004675_AB_CR2500_CR3500_User Guide_Appendix _C 15

16 Postal Codes All Postal Codes Off - Default QR Code On QR Code Off - Default QR Code Enable Checksum QR Code Disable Checksum QR Code Inverse and Standard On QR Code Inverse On All QR Code On (includes Micro QR) Inverse and Micro QR Code On GS1 DataBar Limited On (formerly RSS) GS1 DataBar 14/Truncated 14 On (formerly RSS) GS1 DataBar 14 Stacked On (formerly RSS) GS1 DataBar Expanded On (formerly RSS) All GS1 DataBar On (formerly RSS) All GS1 DataBar Off (Default) (formerly RSS) Telepen - On - Default Telepen - Off UPC On - Default UPC Off UPC Short Margin Enabled - Default UPC Short Margin Disabled UPC Extension On - Default UPC Extension Off C004675_AB_CR2500_CR3500_User Guide_Appendix C 16

17 Vibrate On Beep On Vibrate On Beep Off Vibrate Off Beep On - Default Beep - Off Beep - Low Beep - High - Default Lockout Link Mode Unlock Link Mode Targeting - On Default Targeting - Off Reader Power Off - 1 Hour Reader Power Off - 2 Hours Default Reader Power Off - 4 Hours Readability Index Output Enabled Readability Index Output Disabled Code Readability Index Rule Reader ID and Firmware Version C004675_AB_CR2500_CR3500_User Guide_Appendix _C 17

18 Reader Settings Locked Reader Settings Unlocked US English Keyboard Mapping - Default No Leading 0 US English Keyboard Mapping - Leading 0 Alt + Keypad Numbers Custom Keyboard Mapping French Keyboard German Keyboard Japanese Keyboard Control Characters for Non Printable ASCII Universal Keyboard Mapping Alternative OS Enable (Windows CE/MAC/Unix/Linux) Alternative OS Disable Targeting Zone Tolerances (200) Targeting Zone Tolerances (400) Targeting Zone Tolerances (1600) Optimize Decode Zone 1-D Only (1024 x 200) Optimize Decode Zone Small 2-D (480 x 480) Optimize Decode Zone Medium 2-D (512 x 512) C004675_AB_CR2500_CR3500_User Guide_Appendix C 18

19 Optimize Decode Zone Large 2-D (640 x 640) Optimize Decode Zone Reset to Default (1024 x 640) Mirroring - On Mirroring - Off Default Prefix - Comma Prefix - Space Prefix - Tab (USB Keyboard Mode ONLY) Prefix - Tab (RS-232 Mode ONLY) Prefix - Erase/None Default Prefix - CRLF Suffix - Carriage Return Suffix - Comma Suffix - Line Feed Suffix Carriage Return Line Feed Suffix - Space Suffix - Enter Suffix - Tab (USB Keyboard Mode ONLY) Suffix - Tab (RS-232 Mode ONLY) Suffix - Erase/None - Default Erase Prefix & Suffix Data Reader Text Commands On Reader Text Commands Off - Default Reset to USB Factory Defaults Reset to PS/2 Factory Defaults C004675_AB_CR2500_CR3500_User Guide_Appendix _C 19

20 Reset to RS-232 Factory Defaults Reset to RF One Way Factory Defaults Bootloader Mode Clear All CodeXML Rules Clear All Stored Data Save Settings Motion Detection Scanning On Motion Detection Off CR3 - Backlight Intensity Low CR3 - Backlight Intensity Medium - Default CR3 - Backlight Intensity High CR3 - Backlight Off CR3 - Backlight Off 3 Seconds (Default) CR3 - Backlight Off 6 Seconds CR3 - Backlight Off 10 Seconds Enable Anti-Glare (Default) Disable Anti-Glare C004675_AB_CR2500_CR3500_User Guide_Appendix C 20