Annex to the Accreditation Certificate D-K according to DIN EN ISO/IEC 17025:2005
|
|
- Imogene McCormick
- 6 years ago
- Views:
Transcription
1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-K according to DIN EN ISO/IEC 17025:2005 Period of validity: to Holder of certificate: Rohde & Schwarz Meßgerätebau GmbH Mühldorfstraße 15, München Calibration laboratory: Spidrova 49, Vimperk, Tschechien Head: Deputy: Dr. Gerhard Rösel Petr Hrach Accredited since: Calibrations in the fields: Electrical quantities DC and low frequency quantities DC voltage AC voltage DC current AC current DC resistance Capacity Time and frequency Time interval Frequency High frequency quantities HF voltage HF power Rise time This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/5
2 Permanent Laboratory HF-power 10 nw to 50 nw 8 khz to 100 MHz Connector: N50 2) Measuring devices, > 100 MHz to 2.4 GHz with mismatch > 2.4 GHz to 6 GHz correction 50 nw to 200 mw 8 khz to 100 MHz > 100 MHz to 2.4 GHz > 2.4 GHz to 6 GHz HF-power 10 nw to 50 nw 8 khz to 100 MHz Connector: N50 2) Generators, > 100 MHz to 2.4 GHz with mismatch > 2.4 GHz to 6 GHz correction 50 nw to 200 mw 8 khz to 100 MHz > 100 MHz to 2.4 GHz > 2.4 GHz to 6 GHz mw 50 MHz HF-Linearity 100 nw to 10 µw > 8 khz to 6 GHz db Connector: N50 2) attenuation 10 µw to 100 mw > DC to 6 GHz 0.01 db HF- DC ratio 2 mv to 22 mv > 8 khz to 6 GHz db Connector: N50 2) (Effective value) 22 mv to 2 V > DC to 6 GHz 0.01 db HF-Voltage 2 mv to 2 V > 8 khz to 100 MHz Connector: N50 2) Measuring devices > 100 MHz to 2.4 GHz Ohm (Effective value) > 2 GHz to 6 GHz Band width Oscilloscope 10 MHz to 6 GHz 2 mv to 2 V f Connector: N50 2) f: Measuring value Frequency 0.10 Hz to 6 GHz ( U Tf ) f f: Measuring value U Tf: Relative Triggeruncertainty Time tintervall 10 ns to 100 s 2 ns + ( U Tf ) t t: Measuring value DC voltage 0 V to 220 mv U + 1 µv U: Measuring value Measuring devices > 220 mv to 1000 V U DC voltage 0 V to 100 mv U + 2 µv Sources > 100 mv to 100 V U > 100 V to 1000 V U Period of validity: to Translation - 2/5
3 AC voltage 1 mv to 220 V 10 Hz to < 20 Hz U + 8 µv U: Measuring value Measuring devices 20 Hz to 20 khz U + 4 µv > 20 khz to 50 khz U + 8 µv > 50 khz to 100 khz U + 16 µv 1 mv to 22 V > 100 khz to 300 khz U + 18 µv > 300 khz to 500 khz U + 20 µv > 500 khz to 1 MHz U + 20 µv > 22 V to U max > 100 khz to 300 khz U + 16 mv 7 2,2 10 V Hz Umax > 300 khz to 500 khz U + 30 mv f > 500 khz to 1 MHz U + 80 mv > 220 V to 1000 V 15 Hz to 50 Hz U mv U: Measuring value > 50 Hz to 1 khz U mv 1 mv to 3.5 V 10 Hz to 30 Hz U + 4 µv U on 50 Ω > 30 Hz to 120 Hz U + 4 µv U: Measuring value > 120 Hz to 120 khz U + 4 µv > 120 khz to 2 MHz U + 5 µv > 2 MHz to 10 MHz U + 5 µv > 10 MHz to 20 MHz U + 5 µv > 20 MHz to 30 MHz U + 15 µv > 30 MHz to 50 MHz U + 15 µv AC voltage 1 mv to 10 mv 10 Hz to 20 khz U + 4 µv sources > 20 khz to 50 khz U + 4 µv > 50 khz to 100 khz U + 4 µv > 100 khz to 1 MHz U + 10 µv > 10 mv to 100 V 10 Hz to 20 khz U + 2 µv > 20 khz to 50 khz U + 2 µv > 50 khz to 100 khz U + 2 µv > 100 khz to 300 khz U + 2 µv > 300 khz to 1 MHz U + 10 µv > 100 V to 700 V 10 Hz to 20 Hz U + 2 mv > 20 Hz to 50 khz U + 2 mv > 50 khz to 100 khz U + 2 mv Period of validity: to Translation - 3/5
4 DC current 0 A to 100 µa I + 1 na I: Measuring value Measuring devices > 100 µa to 0.22 A I > 0.22 A to 2.2 A I > 2.2 A to < 3 A I 3 A to < 11 A I µa Sources 0 A to 100 µa I + 1 na > 100 µa to 100 ma I > 100 ma to 1 A I > 1 A to 60 A I AC current 100 µa to 220 ma 10 Hz to 20 Hz I + 1 µa Measuring devices > 20 Hz to 1 khz I + 1 µa > 1 khz to 5 khz I µa > 5 khz to 10 khz I µa > 220 µa to 2.2 ma > 5 khz to 10 khz I + 1 µa > 2.2 ma to 22 ma > 5 khz to 10 khz I + 5 µa > 22 ma to 220 ma > 5 khz to 10 khz I + 10 µa > 220 ma to 2.2 A > 20 Hz to 1 khz I + 30 µa > 1 khz to 5 khz I + 50 µa > 5 khz to 10 khz I ma > 2.2 A to < 3 A 10 Hz to 45 Hz I µa > 45 Hz to 1 khz I µa > 1kHz to 5 khz I + 1 ma > 5 khz to 10 khz I + 5 ma 3 A to < 11 A 45 Hz to 100 Hz I + 2 ma > 100 Hz to 1 khz I + 2 ma > 1 khz to 5 khz I + 2 ma AC current 100 µa to 1.2 ma 10 Hz to 20 Hz I µa Sources > 20 Hz to 45 Hz I µa > 45 Hz to 10 khz I µa > 1.2 ma to 120 ma > 10 Hz to 20 Hz I + 1 µa > 20 Hz to 45 Hz I + 1 µa > 45 Hz to 10 khz I + 1 µa > 120 ma to 1 A 10 Hz to 20 Hz I + 1 µa > 20 Hz to 45 Hz I + 1 µa > 45 Hz to 5 khz I + 1 µa > 5 khz to 10 khz I + 1 µa DC resistance 0 Ω to 10 Ω R + 60 µω R: Measuring value Resistances, > 10 Ω to 100 Ω R mω Measuring devices > 100 Ω to 100 kω R > 100 kω to 1 MΩ R + 2 Ω > 1 MΩ to 10 MΩ R kω > 10 MΩ to 100 MΩ R > 100 MΩ to 1 GΩ R Period of validity: to Translation - 4/5
5 Capacity 1.1 nf to < 3.3 nf 10 Hz to 3 khz C nf C: Measuring value 3.3 nf to < 11 nf 10 Hz to 1 khz C nf 11 nf to < 33 nf 10 Hz to 1 khz C nf 33 nf to < 110 nf 10 Hz to 1 khz C nf 110 nf to < 330 nf 10 Hz to 1 khz C nf 0.33 µf to < 1.10 µf 10 Hz to 600 Hz C + 1 nf 1.1 µf to < 3.3 µf 10 Hz to 300 Hz C + 3 nf 3.3 µf to < 11 µf 10 Hz to 150 Hz C + 10 nf 11 µf to < 33 µf 10 Hz to 120 Hz C + 30 nf 33 µf to < 110 µf DC to 80 Hz C nf 110 µf to < 330 µf DC to 50 Hz C nf 0.33 mf to < 1.1 mf DC to 20 Hz C + 1 µf 2) The measuring uncertainty increases with other connector systems. Period of validity: to Translation - 5/5
Deutsche Akkreditierungsstelle GmbH. Scope of Accreditation D-K to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH to DIN EN ISO/IEC 17025:2005 Period of validity: 30.01.2018 to 27.10.2021 Date of issue: 30.01.2018 Certificate bearer: Testo Industrial Services GmbH Gewerbestraße
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 YOKOGAWA CORPORATION OF AMERICA 2 Dart Road Newnan, GA 30265 Van Puymbrouck Phone: 770 254 0400 x 5021 CALIBRATION Valid To: December
More informationTRACEABLE MEASUREMENT CAPABILITY
PAGE 1 OF 8 DC Voltage Only 0 mv to 200 mv 20 V to 200 V 200 V to 1000 V 1 kv to 30 kv 15 ppm + 3 µv 6 ppm + 2 µv 5 ppm + 3 µv 7 ppm + 50 µv 13 ppm + 250 µv 0.5 % Only 0 mv to 200 mv 20 V to 200 V 200
More informationACLASS Accreditation Services An ANSI-ASQ National Accreditation Board Company
ACLASS Accreditation Services An ANSI-ASQ National Accreditation Board Company SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Oscilloscope Services 7827 Kingsley Houston, TX. 77087 Bill Whitworth Phone:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI/NCSL Z & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 ACUCAL INC. 600 South 56th Street Chandler, AZ 85226 Thomas Efaw Phone: 480 753 7000 CALIBRATION Valid To: September
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELECTRO LAB SERVICES, INC. 517 N. Fulton Avenue Evansville, IN 47710 Robert J. Dreier Phone: 812 423 5211 CALIBRATION Valid To: April 30, 2019 Certificate Number:
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 8 New Vision Business Park Glascoed Road St Asaph LL17 0LP Contact: Mr Alan Horner Tel: +44 (0)1492 550 398 E-Mail: alan.horner@mcs-testequipment.com
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 TESTEQUITY LLC 6100 Condor Drive Moorpark, CA 93021 Ed Yankajtis Phone: 805 498 9933 CALIBRATION Valid To: October
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 JM TEST SYSTEMS, INC. 3947 Lincoln Ave., Ste. B Groves, TX 77619 Jerry Kraus Phone: 432 580 7040 CALIBRATION Valid To: February 29,
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Instrument Company, Inc. 332 North Fries
More informationDiscipline Electro-Technical Calibration Issue Date Certificate Number C-0556 Valid Until Last Amended on - Page 1 of 7
SAC (ISRO)-TIMCD-Calibration, Space Applications Centre, Last Amended on - Page 1 of 7 SOURCE 1. DC VOLTAGE $ 10 V 4.0 µv Using DC Reference Standard Fluke /734A(732B) 100 mv to 1V 0.66 µv to 4 µv Using
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that McCune s Instrument, Inc. 108 North Lee Street
More informationCalsytech, # 38 North Mada Street Nandambakkam, Chennai, Tamil Nadu. Discipline Electro-Technical Calibration Issue Date
Last Amended on 23.11.2016 Page 1 of 7 SOURCE 1. DC VOLTAGE $ 1mV to 10 mv 10 mv to100 mv 100 mv to1000 V 0.43% to 0.05% 0.05% to 0.01% 0.01% to 0.004% Calibrator, Calibrator by DC VOLTAGE 1mV to 20 mv
More informationTesting & Calibration Lab, 204, Diamond Industrial Estate No. 2, Ketki Pada Road, (Near Dahisar Toll Naka), Dahisar (East), Mumbai, Maharashtra
Last Amended on - Page 1 of 5 SOURCE 1. DC VOLTAGE 1 mv to 32 mv 0.43 % to 0.02 % 32 mv to 32 V 0.02 % to 0.008 % 32 V to 1000 V 0.008 % to 0.02 % 2. DC CURRENT 10 µa to 320 µa 0.15 % to 0.03 % 32 µa to
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Rothe Development, Inc. Metrology Services
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 TRANE LA CROSSE METROLOGY LAB 2313 20th Street South La Crosse, WI 54601 Rick McKenzie Phone: 608 787 4032 CALIBRATION Valid To: October
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Tra-Cal, LLC 7901 Beechcraft Avenue, Suite
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Wilmington Instrument Company, Inc. 332 North
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ADVANCED TEST EQUIPMENT CORP. 10401 Roselle Street San Diego, CA 92121 Gabriel Alcala Phone: 858 558 6500 CALIBRATION Valid To: April
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that TesCom 2600 Longhorn Blvd., Ste. 112 Austin,
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that DGI Metrology/Dimensional Gauge Company 2144
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 JM TEST SYSTEMS, INC. Calibration Laboratory Division 1600 Watterberg Way Alexandria, LA 71303 Jerry Kraus Phone: 225 925 2029 x 3028
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AMERICAN GAGE 1131 S. Richfield Rd Placentia, CA Roger Arnold Phone: CALIBRATION
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AMERICAN GAGE 1131 S. Richfield Rd Placentia, CA 92870 Roger Arnold Phone: 657 216 2600 CALIBRATION Valid To: December 31, 2017 Certificate Number: 4296.01
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540.3-2006 ELECTRO RENT CORPORATION 15385 Oxnard Street Van Nuys, CA 91411 Karl Haynes Phone: 770 310 5228 CALIBRATION Valid To: June 30, 2019
More informationPresident For the Accreditation Council Certificate Number Valid to January 31, 2010
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY HAYES INSTRUMENT SERVICE, INC. Billerica, MA for technical competence in the field of Calibration This laboratory
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 G.T. MICHELLI COMPANY, INC. 130 Brookhollow Esplanade Harahan, LA 70123 Patrick Jester Phone: 504 733 9822 CALIBRATION Valid To: May
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PYLON ELECTRONICS INC. 147 Colonnade Road Ottawa, Ontario Canada K2E 7L9 Jim Mullins Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PYLON ELECTRONICS INC. 147 Colonnade Road Ottawa, Ontario Canada K2E 7L9 Jim Mullins Phone: 613 226 7920 CALIBRATION Valid To: September 30, 2018 Certificate
More informationButler Technologies. Unit 14, Block G, Maynooth Business Campus, Co. Kildare, Ireland. Calibration Laboratory Registration number: 256C
Unit 14, Block G, Maynooth Business Campus, Co. Kildare, Ireland Calibration Laboratory Registration number: 256C is accredited by the Irish National Board (INAB) to undertake calibration as detailed in
More informationClemens Bender Karl Scharber Christian Kliche
Deutsche Akkreditierungsstelle GmbH Scope of Accreditation D-K-15070-01-08 DIN EN ISO/IEC 17025:2005 Period of validity: 13.11.2015 20.10.2016 Date of issue: 13.11.2015 Certificate bearer: Tes Industrial
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 INSTRUMENT CALIBRATION SERVICE, INC., A TEST EQUIPMENT REPAIR CORPORATION company 5965 Shiloh Road East Alpharetta, GA 30005 Don Petersen
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 INDUSTRIAL PROCESS MEASUREMENT, INC. 3910 Park Avenue, Unit 7 Edison, NJ 08820 Mark Gural Phone: 732 632 6400 www.instrumentation2000.com
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CONTROL AUTOMATION TECHNOLOGIES CORP 101 N Chestnut St. Winston-Salem, NC 27101 Rob Igoe Phone: 336 725 6020 x 111 CALIBRATION Valid
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Teledyne LeCroy 700 Chestnut Ridge Road Chestnut
More informationButler Technologies. Unit 14, Block G, Maynooth Business Campus, Co. Kildare, Ireland. Calibration Laboratory Registration number: 256C
Unit 14, Block G, Maynooth Business Campus, Co. Kildare, Ireland Calibration Laboratory Registration number: 256C is accredited by the Irish National Board (INAB) to undertake calibration as detailed in
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 TEKTRONIX CANADA 400 Britannia Road E, Unit 2 Mississauga, Ontario L4Z 1X9 Canada Andrew Sweeny Phone: 905 241 3021 CALIBRATION Valid
More informationCALIBRATION CMC 2, 4 ( )
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ADVANCED TEST EQUIPMENT CORP.. 104011 Roselle Street San Diego, CA 92121 Jill Berg Phone: 858 558 6500 CALIBRATION Valid To: April 30,
More informationMPS Electrical Test Laboratory, Larsen & Toubro Limited, Mysore Campus, KIADB Industrial Area, Hebbal Hootagalli, Mysore, Karnataka
Last Amended on - Page 1 of 6 SOURCE 1. DC VOLTAGE $ 1mV to 10 mv 0.13 % to 0.014% Using Multifunction Calibrator 10 mv to 1 V 0.014% to 0.0016% By Direct Method 1 v to 10 V 0.0016% to 0.0017% 10 V to
More informationTechnical Services Department, BHEL, Piplani, Bhopal, Madhya Pradesh. Discipline Electro Technical Calibration Issue Date
Last Amended on 29.02.2016 Page 1 of 6 SOURCE 1. DC VOLTAGE $ 100mV to 220 mv 220 mv to 220 V 220 V to 1000 V 2. AC VOLTAGE $ 50 Hz to 1 khz 3 mv to 220 mv 220 mv to 220 V 220 V to 1000 V 3. DC CURRENT
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CONNECTICUT CALIBRATION LABS 327 S. Main Street Newtown, CT 06470 Joseph Zeolla Phone: 203 270 1263 CALIBRATION Valid To: October 31,
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Korea 775 Gyeongin-ro
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Korea 775 Gyeongin-ro
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z & ANSI/NCSLI Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z540-1-1994 & ANSI/NCSLI Z540.3-2006 NORTHROP GRUMMAN SYSTEMS CORPORATION, AEROSPACE SYSTEMS One Space Park, S/2746 Redondo Beach, CA 90278 Robert
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CASCADE ENGINEERING SERVICES, INC. 6640 185th Ave NE Redmond WA 98052 Contact: Charles Heidlage Phone: 425 895 8617 x 713 CALIBRATION
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PYLON ELECTRONICS INC. 147 Colonnade Road Ottawa, Ontario Canada K2E 7L9 Jim Mullins Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PYLON ELECTRONICS INC. 147 Colonnade Road Ottawa, Ontario Canada K2E 7L9 Jim Mullins Phone: 613 226 7920 CALIBRATION Valid To: September 30, 2020 Certificate
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 NOVASTAR METROLOGY 35200 Plymouth Road Livonia, MI 48150 Guy Howe Phone: 734 453 8003 CALIBRATION Valid To: March 31, 2019 Certificate
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
1 Wilson Street Contact: Mr Ibrahim Ibrahim Thornaby Tel: +44 (0) 1642 626148 Stockton-On-Tees Fax: +44 (0) 870 143 1869 TS17 7AR E-Mail: ibrahim@calibrate.co.uk United Kingdom Website: www.calibrate.co.uk
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INSTRUMENTATION DYNATHERM INC. 4127 Rue Cousens Ville St-Laurent, QC Canada H4S 1V6 Graziano Chila Phone: 514 636 7800 CALIBRATION Valid To: May 31, 2018 Certificate
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
ANSI-ASQ National Accreditation Board/ACLASS SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 Tektronix Service Solutions Timonium Business Park 1946 Greenspring Drive Suite A Timonium,
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Unit 3, Watt House Innovation Centre Pensnett Estate Kingswinford West Midlands DY6 7YD Contact: Mr A P Walker Tel: +44 (0)1384 401132 Fax: +44 (0)1384 400754 E-Mail: mail@quasartronics.com Website: www.quasartronics.com
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Techmaster Electronics, Inc. 46782 Lakeview
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 PRATT & WHITNEY CALIBRATION SERVICES LAB 17900 Beeline Highway MS 724-14 Jupiter, FL 33478 Contact: Mr. Jack Pardue Phone: 561 796 1315
More informationCalibration Laboratory Assessment Service CLAS Certificate Number Page 1 of 10
Calibration Laboratory Assessment Service CLAS Certificate Number 95-02 Page 1 of 10 400 Britannia Road East, Unit #1 Mississauga, Ontario L4Z 1X9 Contact: Mr. Vince Casali Tel (905) 890-7600, (800) 36FLUKE
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 AMERICAN GAGE 1131 S. Richfield Rd Placentia, CA 92870 Roger Arnold Phone: 657 216 2600 CALIBRATION Valid To:
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Transcat Portland 14058 SW Milton Court Portland,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z540-1-1994 TEKTRONIX, INC. 13725 SW Karl Braun Drive Beaverton, OR 97077 Andrew Mumford Phone: 503 627 2476 CALIBRATION Valid to: August 31, 2018
More informationNational Voluntary Laboratory Accreditation Program
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Transcat St. Louis 527 Mae Court Fenton, MO 63026 Mr. Jim Beckner Phone: 636-349-7722 Fax: 636-349-4590 E-mail: jbeckner@transcat.com URL: www.transcat.com
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, Unit 8 The Centre Holywell Business Park Northfield Road Southam Warwickshire CV47 0FP Contact: Mr N Morgan Tel: +44 (0)1926 812066 Fax: +44
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z540-1-1994 TEKTRONIX, INC. 9902 East 43 RD Street Suite D Tulsa, OK 74146 Mark Jackson Phone: 800 438 8165 CALIBRATION Valid To: September 30,
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Technical Maintenance, Inc. 3000 Northwoods
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Diamond Technical Services 11 Depot Street
More informationAL ANSARI TRADING ENTERPRISE LLC P.O. BOX: 1832 PC: 112 RUWI, MUSCAT OMAN
This is to signify that AL ANSARI TRADING ENTERPRISE LLC P.O. BOX: 1832 PC: 112 RUWI, MUSCAT OMAN Calibration Laboratory CL-139 has met the requirements of the IAS Accreditation Criteria for Calibration
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Total Solutions, Inc. 7722 Metric Drive Mentor,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z540.3
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3 SIMCO ELECTRONICS (Ireland) Limited IDA Business & Technology Park Garrycastle, Dublin Rd Athlone Westmeath, Ireland
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Technical Maintenance, Inc. 4613 Northwest
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration, Inc. 1 Industrial
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Transcat Los Angeles 1503 E. Orangethorpe
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GEFEN ELECTRONIC SERVICES LTD 30 Hasivim Street Petah-Tikva 4951169 Israel Arcady Gefen Phone: 97239266044 CALIBRATION Valid To: June 30, 2019 Certificate Number:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 RS CALIBRATION SERVICES, INC. 1047 Serpentine Lane Pleasanton, CA 94566 Mr. Ralph Sabiel Phone: 925 462 4217 CALIBRATION Valid To: April
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 21-23 Campus Road Contact: Mr K G Dove Listerhills Science Park Tel: +44 (0)1274 393857 Bradford Fax: +44 (0)1274 393336 BD7 1HR E-Mail: sales@otc.co.uk
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that NQA & Conformity Assessment Laboratory 23B
More informationCalibration Department Address Yard No 304 Road 4306 Block 343 Mina Salman Industrial Area Manama, Bahrain. 0 mm to 600 mm / 0.01 mm 7.
IAS Accreditation Number CL-132 Accredited Entity Address Yard No 304 Road 4306 Block 343 Mina Salman Industrial Area Manama, Bahrain Contact Name Mr. Masood Khatib Mr. Raja Kalimuthu Telephone +973 17727450
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Lockheed Martin Stennis IMC Bldg 5100 Stennis
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TRADEPORT ELECTRONICS CALIBRATION LABORATORY 1750 Steeles Ave. West, Suite 5 Concord, Ontario L4K 2L7 CANADA Barry Conway Phone: 905 660 3797 CALIBRATION Valid
More informationThis annex is valid from: to Replaces annex dated:
Premises: (Son) & Nijmegen LF 0 0 DC/LF Quantities LF 1 0 DC Voltage measuring and generating 10 V 5 10-7 U zenerreferences 1 V and 1.018 V 2.3 10-6 U zenerreferences 0 V to 10 V 0.3 V 10 V to 200 mv 3
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 SIMCO ELECTRONICS - DRAPER, UTAH 65 E. Wadsworth Park Drive Suite 101 Draper, UT 84020 Curtis Keller Phone:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z VITREK LLC Kirkham Road Poway, CA Kevin Clark Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 VITREK LLC 12169 Kirkham Road Poway, CA 92064 Kevin Clark Phone: 858-689-2755 CALIBRATION Valid To: October 31, 2020 Certificate Number:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI/NCSL Z & ANSI/NCSLI Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI/NCSL Z540-1-1994 & ANSI/NCSLI Z540.3-2006 ANRITSU COMPANY MORGAN HILL CALIBRATION SERVICES 490 Jarvis Drive Morgan Hill, CA 95037 Yeou-Song (Brian) Lee
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 WEST CALDWELL CALIBRATION LABORATORIES, INC. 1575 State Route 96 Victor, NY 14564 Felix Christopher Phone: 585 586 3900 CALIBRATION
More informationFor the National Voluntary Laboratory Accreditation Program
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Transcat San Juan 281 Calle Matadero Urb Puerto Nuevo San Juan, PR 00920 Mr. Brian Samuelson Phone: 787-706-8855 Fax: 787-792-3614 E-mail: bsamuelson@transcat.com
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 SIMCO ELECTRONICS 8203-J Piedmont Triad Parkway Greensboro, NC 27409 Gene Denmark Phone: 336 605 1665 Fax: 336
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 HAYES INSTRUMENT SERVICE, INC. 530 Boston Road Billerica, MA 01821 Tony Ganchi Phone: 978 663 4800 CALIBRATION Valid until: January
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. EL AL STANDARDS LABORATORY EL AL Head Office Ben-Gurion Airport Motty Shai Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EL AL STANDARDS LABORATORY EL AL Head Office Ben-Gurion Airport Motty Shai Phone: 972 3 9716596 CALIBRATION Valid To: July 31, 2019 Certificate Number: 4282.01
More informationApril 10, 2018 VIA . Gore Laboratories, Inc. Jeff Buechler 10 Northern Blvd., Suite 5 Amherst, NH 03031
April 10, 2018 VIA EMAIL Gore Laboratories, Inc. Jeff Buechler 10 Northern Blvd., Suite 5 Amherst, NH 03031 Re: Extension for ISO/IEC 17025: 2005 accreditation Dear Jeff: This letter is to inform you that
More informationCalibration Specialists Ltd
The National Technological Park, Castletroy, Limerick Calibration Laboratory Registration number: 001C is accredited by the Irish National Board (INAB) to undertake calibration as detailed in the Schedule
More informationCERTIFICATE OF ACCREDITATION. ANSI/NCSL Z (R2002) and ANSI/NCSL Z (R2013)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration 5909 Breckenridge
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI National Accreditation Board 11617 Coldwater Road, Fort Wayne, IN 46845 USA This is to certify that Angel s Instrumentation, A Transcat Company 928 Canal Drive Chesapeake,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 IKONIX USA, LLC 28105 N. Keith Drive Lake Forest IL 60045 Dwayne Davis Phone: 847 367 4077 ext 1244 CALIBRATION Valid To: February 28,
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that NQA & Conformity Assessment Laboratory 23B
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INCO-LABS Plot No. 151, Block No.1 Street No. 101 North Subhan, Safat, Kuwait 13071 Abdulaziz A. Al-Obaidan Phone: 00965-2475 2330 CALIBRATION Valid To: December
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Advanced Technical Services NW, Inc. 8612
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2017 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Accredited Calibration Services, Inc. (Marsh
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Issue No: 050 Issue date: 11 September 2017 0310 DPN 175 Lammas Road Corby Northamptonshire NN17 5JF Contact: Mr S MacLeod Tel: +44 (0)1536
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 ine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK The Calibration House Halesfield 7 Telford Shropshire TF7 4QL Contact: Mr R A Jones Tel: +44 (0) 1952 681 500 Fax: +44 (0) 118 927 6855 E-Mail:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 JM TEST SYSTEMS, INC. Calibration Laboratory Division 7323 Tom Drive Baton Rouge, LA 70806 Jerry Kraus Phone: 225 925 2029 x3028 CALIBRATION
More informationFor the National Voluntary Laboratory Accreditation Program
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 SET Y GAD SAS METROLOGY LABORATORY CARRERA 48 # 101A - 69 Bogotá, Colombia Mr. Steven Mesa Phone: 57 1 7559277 E-mail: steven.mesa@setgad.com Fields of Calibration
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Advanced Technical Services NW, Inc. 8612
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI National Accreditation Board 11617 Coldwater Road, Fort Wayne, IN 46845 USA This is to certify that E2b Calibration, LLC 521 Fifth Avenue Chardon, OH 44024 has been assessed
More information