CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

Transcription

1 CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, This is to certify that Techmaster Electronics, Inc Lakeview Blvd. Fremont CA has been assessed by ANAB and meets the requirements of international standard ISO/IEC 17025:2005 and national standard ANSI/NCSL Z (R2002) while demonstrating technical competence in the field of CALIBRATION Refer to the accompanying Scope of Accreditation for information regarding the types of calibrations to which this accreditation applies. AC Certificate Number Certificate Valid: 08/15/ /29/2018 Version No. 002 Issued: 08/15/2017 This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017).

2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AND ANSI/NCSL Z (R2002) Techmaster Electronics, Inc Lakeview Blvd. Fremont, CA Robert Tyler ext 12 CALIBRATION Valid to: October 29, 2018 Certificate Number: AC Electrical DC/Low Frequency DC Voltage Source 3 DC Voltage - Measure 3 AC Voltage - Source 3 (0 to 220) mv 220 mv to 2.2 V (2.2 to 11) V (11 to 22) V (22 to 220) V (220 to 1 100) V (0 to 100) mv 100 mv to 1 V (1 to 10) V (10 to 100) V (100 to 1 000) V Up to 15 kv (0 to 2.2) mv 40 Hz to 20 khz (100 to 300) khz (300 to 500) khz 500 khz to 1 MHz 8 µv/v µv 7 µv/v + 1 µv 7 µv/v µv 7 µv/v µv 8 µv/v + 80 µv 9 µv/v mv 7.2 µv/v µv 7 µv/v µv 6.9 µv/v µv 9.2 µv/v + 38 µv 9.3 µv/v mv 2 mv/v 0.55 mv/v µv 0.21 mv/v µv 0.11 mv/v µv 0.37 mv/v µv 0.85 mv/v + 7 µv 1.1 mv/v + 13 µv 1.7 mv/v + 25 µv 3.4 mv/v + 25 µv Fluke 5700A/03 Ross Engineering VD-15, Fluke 5700A/03 Page 1 of 17

3 Electrical DC/Low Frequency AC Voltage - Source 3 (2.2 to 22) mv 40 Hz to 20 khz (100 to 300) khz (300 to 500) khz 500 khz to 1 MHz (22 to 220) mv 40 Hz to 20 khz (100 to 300) khz (300 to 500) khz 500 khz to 1 MHz 220 mv to 2.2 V 40 Hz to 20 khz (100 to 300) khz (300 to 500) khz 500 khz to 1 MHz (2.2 to 22) V 40 Hz to 20 khz (100 to 300) khz (300 to 500) khz 500 khz to 1 MHz 0.55 mv/v + 5 µv 0.21 mv/v + 5 µv 0.11 mv/v + 5 µv 0.37 mv/v + 5 µv 0.85 mv/v + 7 µv 1.1 mv/v + 12 µv 1.7 mv/v + 25 µv 3.4 mv/v + 25 µv 0.55 mv/v + 13 µv 0.21 mv/v + 8 µv 0.11 mv/v + 8 µv 0.32 mv/v + 8 µv 0.85 mv/v + 25 µv 1.1 mv/v + 25 µv 1.7 mv/v + 35 µv 3.4 mv/v + 80 µv 0.50 mv/v + 80 µv 0.16 mv/v + 25 µv 75 µv/v + 6 µv 0.12 mv/v + 16 µv 0.25 mv/v + 70 µv 0.43 mv/v mv 1.1 mv/v mv 2.2 mv/v mv 0.50 mv/v mv 0.16 mv/v mv 75 µv/v + 60 µv 0.12 mv/v mv 0.25 mv/v mv 0.50 mv/v mv 1.3 mv/v mv 2.7 mv/v mv Fluke 5700A/03 Page 2 of 17

4 Electrical DC/Low Frequency AC Voltage - Source 3 AC Voltage - Source 3 Wide Band Absolute Level Output 30 Hz to 500 khz AC Voltage - Source 3 Wide Band Flatness relative to 1 khz DC Current - Source 3 (22 to 220) V 40 Hz to 20 khz (100 to 300) khz (300 to 500) khz 500 khz to 1 MHz 220 V to V (15 to 50) Hz 50 Hz to 1 khz (0 to 1.1) mv (1.1 to 3) mv (3 to 11) mv (11 to 33) mv (33 to 110) mv (110 to 330) mv 330 mv to 1.1 V (1.1 to 3.5) V (10 to 30) Hz (30 to 120) Hz 120 Hz to 1.2 khz (1.2 to 12) khz (12 to 120) khz 120 khz to 1.2 MHz (1.2 to 2) MHz (2 to 10) MHz (10 to 20) MHz (20 to 30) MHz (0 to 220) μa 220 μa to 2.2 ma (2.2 to 22) ma (22 to 220) ma 220 ma to 2.2 A (0 to 11) A 0.50 mv/v + 8 mv 0.16 mv/v mv 80 µv/v mv 0.22 mv/v mv 0.50 mv/v + 8 mv 1.5 mv/v + 90 mv 4.7 mv/v + 90 mv 12 mv/v V 0.40 mv/v + 16 mv 80 µv/v mv 8 mv/v + 2 µv 7 mv/v + 3 µv 7 mv/v + 8 µv 6 mv/v + 16 µv 6 mv/v + 40 µv 5 mv/v mv 5 mv/v mv 4 mv/v mv 3 mv/v 1 mv/v 1 mv/v 1 mv/v 1 mv/v 1 mv/v 1 mv/v + 3 µv 2 mv/v + 3 µv 4 mv/v + 3 µv 10 mv/v + 3 µv 50 µa/a + 8 na 50 µa/a + 8 na 50 µa/a + 80 na 60 µa/a µa 80 µa/a + 25 µa 0.50 ma/a ma Fluke 5700A/03 Fluke 5700A/03 Wide Band Function Fluke 5700A/03 Wide Band Function Fluke 5700A/03 (11 to 20.5) A 1 ma/a ma Fluke 5520A Page 3 of 17

5 Electrical DC/Low Frequency DC Current - Source 3 (0 to 220) A 0.50 A DC Current - Measure 3 Up to 100 na 100 na to 1 µa (1 to 10) µa (10 to 100) µa 100 µa to 1 ma (1 to 10) ma 22 µa/a + 93 pa 18 µa/a na 28 µa/a na 30 µa/a na 30 µa/a na 30 µa/a + 63 na HP 6671A, L&N Current Shunt, DC Current - Measure 3 (1 to 10) A 1.5 ma/a ma Fluke 8846A DC Current - Measure 3 AC Voltage - Measure 3 (10 to 100) A (100 to 300) A (0 to 10) mv (1 to 40) Hz 40 Hz to 1 khz (1 to 20) khz (100 to 300) khz 10 mv to 10 V (1 to 40) Hz 40 Hz to 1 khz (1 to 20) khz (100 to 300) khz 300 khz to 1 MHz (1 to 2) MHz (10 to 100) V (1 to 40) Hz 40 Hz to 1 khz (1 to 20) khz (100 to 300) khz 300 khz to 1 MHz 0.40 A 0.60 A 0.36 mv/v µv 0.23 V/V µv 0.32 mv/v µv 1.2 mv/v µv 5.7 mv/v + 2 µv 46 mv/v µv 72 µv/v mv 84 µv/v mv 0.17 mv/v mv 0.35 mv/v mv 0.93 mv/v mv 3.5 mv/v mv 12 mv/v mv 18 mv/v mv 0.24 mv/v mv 0.15 mv/v + 16 mv 0.15 mv/v + 17 mv 0.36 mv/v mv 1.4 mv/v mv 4.8 mv/v + 12 mv 18 mv/v + 12 mv L&N 4361, Page 4 of 17

6 Electrical DC/Low Frequency AC Voltage - Measure 3 AC Current - Source V to 1 kv (1 to 40) Hz 40 Hz to 1 khz (1 to 20) khz (2 to 10.6) kv 0.46 mv/v + 50 mv 0.46 mv/v + 28 mv 0.69 mv/v + 29 mv 1.5 mv/v + 24 mv 3.6 mv/v + 24 mv 60 Hz 10 mv/v (0 to 220) µa 40 Hz to 1 khz (1 to 5) khz (5 to 10) khz 220 µa to 2.2 ma 40 Hz to 1 khz (1 to 5) khz (5 to 10) khz (2.2 to 22) ma 40 Hz to 1 khz (1 to 5) khz (5 to 10) khz (22 to 220) ma 40 Hz to 1 khz (1 to 5) khz (5 to 10) khz 220 ma to 2.2 A 20 Hz to 1kHz (1 to 5) khz (5 to10) khz (20 to 1 000) A (45 to 65) Hz (65 to 440) Hz 0.70 ma/a na 0.35 ma/a + 20 na 0.14 ma/a + 16 na 0.60 ma/a + 40 na 1.6 ma/a + 80 na 0.70 ma/a + 40 na 0.35 ma/a + 35 na 0.14 ma/a + 35 na 0.60 ma/a µa 1.6 ma/a µa 0.70 ma/a µa 0.35 ma/a µa 0.14 ma/a µa 0.60 ma/a + 4 µa 1.6 ma/a + 8 µa 0.70 ma/a + 4 µa 0.35 ma/a µa 0.14 ma/a µa 0.60 ma/a + 40 µa 1.6 ma/a + 80 µa 0.66 ma/a ma 0.95 ma/a ma 3.6 ma/a ma 96 ma 43 ma Ross Engineering VD-15 Fluke 5700A Fluke 5520A with Fluke Coil Page 5 of 17

7 Electrical DC/Low Frequency AC Current - Measure 3 Resistance - Measure 3 Fixed Points (4 WIRE) (0 to 100) µa (20 to 45) Hz (45 to 100) Hz 100 Hz to 5 khz 100 µa to 100 ma (20 to 45) Hz (45 to 100) Hz 100 Hz to 5 khz 100 ma to 1 A (20 to 45) Hz (45 to 100) Hz 100 Hz to 5 khz 10A (3 to 5) Hz (5 to 10) Hz 10 Hz to 5 khz (5 to 10) khz 100A 300A 4 ma/a + 30 na 1.5 ma/a + 30 na 0.60 ma/a + 30 na 0.60 ma/a + 30 na 4 ma/a + 20 µa 1.5 ma/a + 20 µa 0.60 ma/a + 20 µa 0.30 ma/a + 20 µa 4 ma/a ma 1.6 ma/a ma 0.80 ma/a ma 1 ma/a ma 20 ma/a + 6 ma 11 ma/a + 6 ma 1.5 ma/a + 6 ma 3.5 ma/a + 70 ma (50 to 60) Hz 0.60 A (50 to 60) Hz 0.80 A 10 Ω 22 µω/ω + 62 µω 100 Ω 18 µω/ω mω 1 kω 16 µω/ω mω 10 kω 15 µω/ω + 13 mω 100 kω 15 µω/ω + 67 mω 1 MΩ 21 µω/ω Ω 10 MΩ 46 µω/ω kω 100 MΩ 0.56 mω/ω kω 1 GΩ 6 mω/ω + 12 kω Fluke 8846A Leeds & Northrup 4361 w/3458a Leeds & Northrup 4363 w/3458a Page 6 of 17

8 Electrical DC/Low Frequency Resistance - Source 3 Fixed Points Resistance - Source 3 1 Ω 1.9 Ω 10 Ω 19 Ω 100 Ω 190 Ω 1 kω 1.9 kω 10 kω 19 kω 100 kω 190 kω 1 MΩ 1.9 MΩ 10 MΩ 19 MΩ 100 MΩ (0 to 11) Ω (11 to 33) Ω (33 to 110) Ω (110 to 330) Ω 330 Ω to 1.1 kω (1.1 to 3.3) kω (3.3 to 11) kω (11 to 33) kω (33 to 110) kω (110 to 330) kω 330 kω to 1.1 MΩ (1.1 to 3.3) MΩ (3.3 to 11) MΩ (11 to 33) MΩ (33 to 110) MΩ (110 to 330) MΩ (330 to 1 100) MΩ 0.12 mω 0.22 mω 0.28 mω 0.58 mω 1.3 mω 2.4 mω 10 mω 20 mω 90 mω 0.19 Ω 1.3 Ω 2.5 Ω 24 Ω 47 Ω 0.47 kω 1.3 kω 12 kω 5.7 µω/ω mω 35 µω/ω mω 29 µω/ω Ω 33 µω/ω mω 30 µω/ω mω 33 µω/ω + 27 mω 4.5 µω/ω Ω 34 µω/ω Ω 33 µω/ω Ω 35 µω/ω + 4 Ω 37 µω/ω Ω 71 µω/ω + 36 Ω 0.15 mω/ω + 67 Ω 0.39 mω/ω + 3 kω 0.58 mω/ω kω 3.5 mω/ω MΩ 18 ma/a MΩ Fluke 5700A/003 Fluke 5520A Page 7 of 17

9 Electrical DC/Low Frequency Capacitance - Source 3 10 Hz to 10 khz 10 Hz to 3 khz 10 Hz to 1 khz 10 Hz to 1 khz (10 to 600) Hz (10 to 300) Hz (10 to 150) Hz (10 to 120) Hz (10 to 80) Hz (0 to 50) Hz (0 to 20) Hz Capacitance - Source khz Electrical Simulation of Thermocouple Indicating Devices Source and Measure 3 Electrical Simulation of Thermocouple Indicating Devices Source and Measure pf to 1.1 nf (1.1 to 11) nf (11 to 110) nf (110 to 330) nf 330 nf to 1.1 µf (1.1 to 3.3) µf (3.3 to 11) µf (11 to 33) µf (33 to 110) µf (110 to 330) µf 330 µf to 1.1 mf 1 pf 10 pf 100 pf 1 nf Type K (-200 to -50) C (-50 to 1 372) C Type T (-200 to -50) C (-50 to 400) C Type J (-210 to -50) C (-50 to 760) C Type E (-230 to -50) C (-50 to 1 000) C Type R (0 to 1 768) C 5 mf/f + 12 pf 5.8 mf/f + 12 pf 2.9 mf/f nf 2.9 mf/f nf 3 mf/f nf 4.1 mf/f nf 4.1 mf/f + 11 nf 4.7 mf/f + 35 nf 5.9 mf/f µf 8.1 mf/f µf 12 mf/f µf 1.2 ff 12 ff 0.12 pf 1.2 pf 0.56 C (1 F) 0.28 C (0.5 F) 0.56 C (1 F) 0.28 C (0.5 F) 0.56 C (1 F) 0.28 C (0.5 F) 0.56 C (1 F) 0.28 C (0.5 F) 0.95 C (1.8 F) Fluke 5520A Agilent 16380C Fluke 5520A Fluke 5520A Page 8 of 17

10 Electrical DC/Low Frequency Oscilloscopes - Square Wave Signal 10 Hz to 10 khz 50 Ω 1 M Ω DC Signal Into 50Ω Into 1MΩ 1 mv to 6.6 V p-p 1 mv to 130 V p-p 1 mv to 6.6 V p-p 1 mv to 130 V p-p 2.5 mv/v + 40 µv 0.50 mv/v + 5 µv 2.5mV/V + 40 µv 0.50 mv/v + 5 µv Leveled Sine Wave Flatness referenced to 50 khz reference Absolute Amplitude 50 khz Reference 50 khz to 100 MHz (100 to 300) MHz (300 to 500) MHz (500 to 600) MHz 10 MHz Reference 600 MHz to 1.6 GHz (1.6 to 2.1) GHz 20 mv/v mv 35 mv/v mv 40 mv/v mv 55 mv/v mv 60 mv/v mv 20 mv/v mv 70 mv/v mv 80 mv/v mv Fluke 5820A 2.1 GHz option Time Markers (5-2-1 sequence) into a 50 Ω load Fast Edge Mode Programmable Rise Time 50 khz to 100 MHz (100 to 300) MHz (300 to 500) MHz (500 to 600) MHz 600 MHz to 1.6 GHz (1.6 to 2.1) GHz 5 s to 50 ms 20 ms to 500 ps (1 to 100) khz 15 mv/v mv 20 mv/v mv 35 mv/v mv 40 mv/v mv 50 mv/v mv 60 mv/v mv 2.5 µs/s + 5 µhz 0.33 µs/s < 0.15 ns/s +/- 25 ps Page 9 of 17

11 Electrical - RF/Microwave RF Tuned Power - Measure 100 khz to 26.5 GHz 100 khz to 3 GHz Digital Modulation - Measure Carrier Frequency 2 MHz to 2.65 GHz Error Vector Magnitude for Modulation Types: MSK, GMSK, BPSK, DQPSK, Π/4DQPSK, 8PSK, 16QAM, 32 QAM and QPSK Phase Error for Modulation Types: MSK, GMSK, BPSK, DQPSK, Π/4DQPSK, 8PSK, 16QAM, 32 QAM and QPSK Error Vector Magnitude for FSK Modulation Amplitude Modulation Source Rate: 10 MHz to 50 GHz 0 % to 100 % 0 db -10 db -20 db -30 db -40 db -50 db -60 db -70 db -80 db -90 db -100 db -110 db -120 db -130 db (1 to 100) khz 100 khz to 1 MHz 1 MHz to 2.65 GHz (1 to 100) khz (0.1 to 1) MHz 1 MHz to 2.65 GHz Modulation Frequency 3.2 khz khz 0.01 db 0.02 db 0.03 db 0.04 db 0.05 db 0.05 db 0.07 db 0.08 db 0.10 db 0.10 db 0.11 db 0.11 db 0.22 db 0.56 db 0.3 % 0.5 % 1.0 % % 1.0 % Agilent E4440A Option 233 HP 89441A Option AYA HP 89441A Option AYA HP 89441A Option AYA DC to 100 khz 0.46 db Agilent 83650B Page 10 of 17

12 Electrical - RF/Microwave Amplitude Modulation - Measure Rate: 50 Hz to 10 khz, 5 % to 99 % 100 khz to 10 MHz 0.75 % rdg % 50 Hz to 100 khz, 20 % to 99 % 5 % to 20 % 10 MHz to 3 GHz 0.5 % rdg % 2.5 % rdg % Agilent N5531S Option Hz to 100 khz, 20 % to 99 % 5 % to 20 % Frequency Modulation - Measure Rate: 20 Hz to 10 khz Dev: 200 Hz to 40 khz pk (3 to 26.5) GHz 250 khz to 10 MHz Beta > 0.2 Beta > % rdg % 4.5 % rdg % 15 mhz/hz Hz 10 mhz/hz Hz Rate: 50 Hz to 200 khz Dev:250 Hz to 400 khz pk Rate: 50 Hz to 200 khz Dev:250 Hz to 400 khz pk 10 MHz to 6.6 GHz Beta > 0.2 Beta > 0.45 (6.6 to 13.2) GHz Beta > 0.2 Beta > 8 15 mhz/hz Hz 10 mhz/hz Hz 25 mhz/hz + 3 Hz 10 mhz/hz + 3 Hz Agilent N5531S Option 233 Rate: 50 Hz to 100 khz Dev:250 Hz to 400 khz pk Frequency Modulation - Source 1 khz rate Max. Dev. 2 MHz Max. Dev. 1 MHz Max. Dev. 2 MHz Max. Dev. 4 MHz Max. Dev. 8 MHz Max. Dev. 16 MHz Max. Dev. 32 MHz Max. Dev. 64 MHz (13.2 to 26.5) GHz Beta > 0.2 Beta > khz to 250 MHz (250 to 500) MHz 500 MHz to 1 GHz (1 to 2) GHz (2 to 3.2) GHz (3.2 to 10) GHz (10 to 20) GHz (20 to 40) GHz 38 mhz/hz Hz 10 mhz/hz Hz 35 mhz/hz khz rate Agilent E8257D Option UNT Page 11 of 17

13 Electrical - RF/Microwave Frequency Modulation - Source Max Dev. 8 MHz Phase Modulation - Measure >0.7 rad Dev. >0.6 rad Dev. >1.2 rad Dev. 40 MHz to 50 GHz 100 khz to 6.6 GHz (6.6 to 13.2) GHz (13.2 to 26.5) GHz MHz rate 10 mrad/rad rad 10 mrad/rad rad 10 mrad/rad rad Agilent 83650B Agilent N5531S Option 233 Phase Modulation - Source 250 khz to 250 MHz (250 MHz to 500 MHz 500 MHz to 1 GHz (1 to 2) GHz (2 to 3.2) GHz (3.2 to 10) GHz (10 to 20) GHz (20 to 40) GHz Distortion - Measure Rate: 20 Hz to 250 khz (0.01 to 100) % Power - Measure, 1 mw reference 20 rad 10 rad 20 rad 40 rad 80 rad 160 rad 320 rad 640 rad 250 khz to 26.5 GHz 20 Hz to 20 khz (20 to 100) khz 50 MHz 1 mw Power Reference 100 khz to 4.2 GHz 50 mrad/rad rad +/- 1 db +/- 1 db +/- 2 db 0.3 % or mw 0.08 db Agilent E8257D Option UNT Agilent N5531S Agilent 8903B Agilent 432A Agilent 478A Opt H76 Agilent 3458A Agilent E4419B Agilent 8482A Power Flatness 0 dbm or 1 mw 10 MHz to 12.4 GHz (12.4 to 18) GHz 50 MHz to 12.4 GHz (12.4 to 26.5) GHz 0.08 db 0.1 db 0.1 db 0.15 db Agilent E4419B Agilent 8481A Agilent E4419B Agilent 8485A Noise Figure - Source 15 db ENR (26.5 to 40) GHz (40 to 50) GHz 10 MHz to 10 GHz (10 to 26.5) GHz 0.16 db 0.24 db 0.14 db 0.17 db Agilent E4419B Agilent 8487A Agilent 346C Page 12 of 17

14 Electrical - RF/Microwave Noise Figure - Measure Single Sideband Phase Noise - Measure Transmission S12/S22 - Measure Magnitude Transmission S12/S22 - Measure Phase 10 MHz to 10 GHz (10 to 26.5) GHz 0.16 db 0.18 db Agilent 346C, Agilent E4440A Opt 219, Agilent 8449B 1 MHz to 3 GHz 0.85 db Agilent E4440A Opt MHz to 2 GHz (- 20 to - 30) db (- 30 to - 40) db (- 40 to - 50) db (- 50 to - 60) db (2 to 20) GHz (0 to - 30) db (- 30 to - 40) db (- 40 to - 50) db (- 50 to - 60) db (20 to 40) GHz (0 to - 30 db (- 30 to - 40 db (- 40 to - 50 db (- 50 to - 60 db (40 to 50) GHz (- 20 to - 30) db (- 30 to - 40) db (- 40 to - 50) db (- 50 to - 60) db 45 MHz to 2 GHz (2 to 20) GHz (20 to 40) GHz (40 to 50) GHz 0.03 db 0.05 db 0.15 db 0.4 db 1.5 db 0.06 db 0.08 db 0.16 db 0.35 db 0.18 db 0.34 db 0.8 db 2.5 db 0.25 db 0.4 db 1.1 db 4 db 11 db Agilent 8510/8517A, Agilent 85056A Agilent 8510/8517A, Agilent 85056A Page 13 of 17

15 Electrical - RF/Microwave Transmission S12/S22 - Measure Magnitude Transmission S12/S22 - Measure Phase Reflection S11/S22 - Measure Magnitude Reflection S11/S22 - Measure Phase 45 MHz to 2 GHz (0 to - 25) db (- 25 to - 40) db (- 40 to - 55) db (- 55 to - 70) db (2 to 8) GHz (0 to - 30) db (- 30 to - 50) db (- 50 to - 60) db (- 60 to - 70) db (8 to 20) GHz (0 to - 30) db (- 30 to - 40) db (- 40 to - 50) db (- 50 to - 60) db (- 60 to - 70) db (20 to 26.5) GHz (- 20 to - 30) db (- 30 to - 40) db (- 40 to - 50) db (- 50 to - 60) db (- 60 to - 70) db 45 MHz to 2 GHz (0 to - 20 db (2 to 8) GHz (8 to 20) GHz (20 to 26.5) GHz 45 MHz to 2 GHz (2 to 20) GHz (20 to 40) GHz (40 to 50) GHz 0.03 db 0.05 db 0.1 db 0.4 db 0.02 db 0.04 db 0.2 db 0.7 db 0.03 db 0.06 db 0.15 db 0.6 db 1.5 db 0.04 db 0.06 db 0.2 db 0.6 db 2 db 9 db db 0.03 db 0.04 db 0.05 db 45 MHz to 50 GHz 16 Agilent 8510/8515A, Agilent 85052D Agilent 8510/8515A Agilent 85052D Agilent 8510/8517A Agilent 85056A Page 14 of 17

16 Electrical - RF/Microwave Reflection S11/S22 - Measure Magnitude Reflection S11/S22 - Measure Phase 45 MHz to 2 GHz (2 to 26.5) GHz 45 MHz to 26.5 GHz db 0.01 db Agilent 8510/8515A Agilent 85052D Length Dimensional Metrology Calipers 3 - Inside Diameter (Fixed Points) Calipers 3 - Outside Diameter Micrometers 3 - Outside Diameter in in 820 µin µin/in 820 µin µin/in in to in 790 µin µin/in in to in 41 µin µin/in Ringmaster Ring Gages Mitutoyo Gage Blocks Mass Scales 3 5 lb 10 lb 20 lb 50 lb 0.15 lb (0.02 g) 0.14 lb (0.031 g) 0.18 lb (0.05 g) 0.18 lb (0.51 g) Balances g to 1 kg % of reading Troemner Weights (5 to 50) lbs Class F Troemner Weights 100 g to 1 kg Page 15 of 17

17 Mass Balances 3 Torque 3 - Source 10 mg 20 mg 100 mg 200 mg 500 mg 1 g 2 g 5 g 10 g 20 g 50 g 100 g Up to 50 ft/lb (2 to 25) ft/lb 0.21 mg 0.26 mg 0.43 mg 0.54 mg 0.72 mg 0.9 mg 1.1 mg 1.5 mg 2.0 mg 4.0 mg 10 mg 20 mg (0.6 % ) ft lb (0.6 % ) ft lb (2 to 25) in/lb (0.5 % ) in lb Generic Weight Set 10 mg to 100 g Mountz LTT-2100 Mountz BMX25i with Mountz LTT-2100 Thermodynamic Temperature - Measure Relative Humidity - Measure (0 to 50) C 0.25 C (-40 to 100) F (100 to 212) F (-40 to 100) C 0.21 F 0.25 F 0.11 C (0 to 80) % RH 2 %RH Hart Scientific 1620A with 2626-S Oakton 340 with S Surface Probe Vaisala HMI41/HMP46 Time and Frequency Frequency - Source 3 1 μhz to 80 MHz 5 x MHz to 26.5 GHz 5 x Agilent 3325A Agilent 58503B Agilent E8257D Agilent58503B Page 16 of 17

18 Time and Frequency Frequency - Source 3 (26.5 To 50) GHz 1 Hz Frequency - Measure 3 1 μhz to 225 MHz 5 x Hz to 40 GHz 5 x Agilent 83650L Agilent 58503B Agilent 53132A Agilent 58503B Agilent 53152A Agilent 58503B Calibration and Measurement Capability (CMC) is expressed in terms of the measurement parameter, measurement range, expanded uncertainty of measurement and reference standard, method, and/or equipment. The expanded uncertainty of measurement is expressed as the standard uncertainty of the measurement multiplied by a coverage factor of 2 (k=2), corresponding to a confidence level of approximately 95%. Notes: 1. On-site calibration service is available for this parameter, since on-site conditions are typically more variable than those in the laboratory, larger measurement uncertainties are expected on-site than what is reported on the accredited scope 2. This scope is formatted as part of a single document including Certificate of Accreditation No. AC Page 17 of 17