CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z

Transcription

1 CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, This is to certify that Advanced Technical Services NW, Inc South 228 th Street Kent, Washington has been assessed by ANAB and meets the requirements of international standard ISO/IEC 17025:2005 and national standard ANSI/NCSL Z while demonstrating technical competence in the field of CALIBRATION Refer to the accompanying Scope of Accreditation for information regarding the types of calibrations to which this accreditation applies. AC-1458 Certificate Number Certificate Valid: 05/19/ /10/2018 Version No. 003 Issued: 05/19/2016 This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated January 2009).

2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z Advanced Technical Services NW, Inc South 228 th Street Kent, Washington Cathy Baldwin Valid to: June 10, 2018 I. Electromagnetic - DC/Low Frequency Parameter/ DC Voltage - Source AC Voltage - Source Up to 330 mv 330 mv to 3.3 V (3.3 to 33) V (33 to 330) V 330 V to 1.02 kv (1 to 33) mv (100 to 500) khz (33 to 330) mv (100 to 500) khz 330 mv to 3.3 V (100 to 500) khz CALIBRATION 60 µv/v + 3 µv 50 µv/v + 5 µv 50 µv/v + 50 µv 55 µv/v mv 55 µv/v mv 3.5 mv/v + 20 µv 1.5 mv/v + 20 µv 2 mv/v + 20 µv 2.5 mv/v + 20 µv 3.5 mv/v + 33 µv 10 mv/v + 60 µv 2.5 mv/v + 50 µv 0.50 mv/v + 20 µv 1 mv/v + 20 µv 1.6 mv/v + 40 µv 2.4 mv/v mv 7 mv/v mv 1.5 mv/v mv 0.30 mv/v + 60 µv 0.80 mv/v + 60 µv 1.4 mv/v mv 2.4 mv/v mv 5 mv/v mv Certificate Number: AC-1458 Fluke 5500A SOP-LABE-03 Fluke 5500A Manual Version 003 Issued: 05/19/2016 Page 1 of Montgomery St. Suite 625 Alexandria, VA

3 Parameter/ AC Voltage - Source (cont.) (3.3 to 33) V (33 to 330) V (1 to 10) khz 330 V to 1.02 kv 1.5 mv/v mv 0.40 mv/v mv 0.80 mv/v mv 1.9 mv/v + 5 mv 2.4 mv/v + 17 mv 0.50 mv/v mv 0.80 mv/v + 15 mv 0.90 mv/v + 33 mv 0.60 mv/v + 80 mv 2 mv/v V 2 mv/v V DC Current - Source Up to 3.3 ma (3.3 to 33) ma (33 to 330) ma 330 ma to 2 A (2 to 10) A 0.13 ma/a + 50 na 0.10 ma/a µa 0.10 ma/a µa 0.30 ma/a + 44 µa 0.60 ma/a ma AC Current - Source (33 to 330) µa (330 µa to 3.3 ma) (3.3 to 33) ma (33 to 330) ma 2.5 ma/a µa 1.3 ma/a µa 1.3 ma/a µa 4 ma/a µa 12.5 ma/a µa 2 ma/a µa 1 ma/a µa 1 ma/a µa 2 ma/a µa 6 ma/a µa 2 ma/a + 3 µa 1 ma/a + 3 µa 0.90 ma/a + 3 µa 2 ma/a + 3 µa 6 ma/a + 3 µa 2 ma/a + 30 µa 1 ma/a + 30 µa 0.90 ma/a + 30 µa 2 ma/a + 30 µa 6 ma/a + 30 µa Fluke 5500A SOP-LABE-03 Fluke 5500A Manual Version 003 Issued: 05/19/2016 Page 2 of 5

4 Parameter/ AC Current Source (cont.) 330 ma to 2.2 A (2.2 to 11) A (45 to 65) Hz (65 to 500) Hz 500 Hz to 1 khz 2 ma/a ma 1 ma/a ma 7.5 ma/a ma 0.60 ma/a + 3 ma 1 ma/a + 3 ma 3.3 ma/a + 3 ma Frequency - Source 0.01 Hz to 10 khz (10 to 100) khz 25 µhz/hz + 1 mhz 25 µhz/hz + 15 mhz Resistance - Source Up to 11 Ω (11 to 33) Ω (33 to 110) Ω (110 to 330) Ω 330 Ω to 1.1 kω (1.1 to 3.3) kω (3.3 to 11) kω (11 to 33) kω (33 to 110) kω (110 to 330) kω 330 kω to 1.1 MΩ (1.1 to 3.3) MΩ (3.3 to 11) MΩ (11 to 33) MΩ (33 to 110) MΩ 0.12 mω/ω + 6 mω 0.12 mω/ω + 10 mω 90 µω/ω + 10 mω 90 µω/ω + 10 mω 90 µω/ω + 60 mω 90 µω/ω + 60 mω 90 µω/ω Ω 90 µω/ω Ω 0.11 mω/ω + 6 Ω 0.12 mω/ω + 6 Ω 0.15 mω/ω + 55 Ω 0.15 mω/ω + 55 Ω 0.60 mω/ω kω 1 mω/ω kω 5 mω/ω kω Fluke 5500A SOP-LABE-03 Fluke 5500A Manual II. Mechanical Parameter/ Force (Tension)* Load Cells Force (Compression)* Load Cells Up to 750 lbf (62 to 1 000) lbf (810 to ) lbf (1472 to ) lbf (12364 to ) lbf ( to 22) lbf (25 to 500) lbf (428 to ) lbf (2038 to ) lbf (46552 to ) lbf F lbf 0.19 lbf 2.4 lbf 4.2 lbf 35 lbf Class F Weights, lbf Load Cells 0.16 lbf 2.7 lbf 7.0 lbf 140 lbf SOP-FIELD-12 Rev New/ ASTM E4 Version 003 Issued: 05/19/2016 Page 3 of 5

5 Parameter/ Pressure Scales 2 Up to 100) psi (101 to 200) psi (201 to 300) psi (301 to 500) psi (501 to 1 000) psi (1 001 to ) psi 1 to 20 g 20 to 210 g 0.46 to 21 lb 21 to 190 lb 190 to 750 lb 0.2 psi 0.28 psi 0.44 psi 0.67 psi 0.93 psi 14.0 psi g g lb lb 0.02 lb Pressure Calibrator SOP-FIELD-15 Class F Weights SOP- FIELD - 24 III. Dimensional Parameter/ Gage Blocks 6 (0.01 to 4) in ( L) µin Pratt & Whitney UMM, Gage Blocks SOP-LABM-04 Rev B/ Pratt & Whitney Manual Calipers 2,6 Up to 60 in ( L) µin Gage Blocks SOP-LABM-17 Micrometers 2,5,6 Up to 20 in (66 + L R) µin Gage Blocks SOP-LABM-08 Indicators,2.5 - Dial and Digital Up to 2 in ( R) µin Pratt & Whitney UMM, Gage Blocks SOP-LABM-10, SOP-LABM-11 Height Gage 2,6 Up to 60 in ( L) µin Gage Blocks SOP-LABM-09 Notes: 1. Capabilities (CMC) (Expanded Uncertainties) are based on approximately a 95% confidence interval, using a coverage of k=2. 2. This laboratory offers calibration services in its laboratory and on-site at customer-designated locations. Since on-site conditions are typically more variable than those in the laboratory, larger measurement uncertainties are expected on-site than what is reported on the accredited scope. 3. Parameters identified with an asterisk (*) are available for on-site calibration. 4. The use of (F) refers to applied force. 5. The use of (R) refers to the Resolution of the unit under test. 6. The term (L) stands for the applied Length. 7. The term (P) stands for the applied Pressure 8. This scope is formatted as part of a single document including the Certificate of Accreditation No.AC Version 003 Issued: 05/19/2016 Page 4 of 5

6 Version 003 Issued: 05/19/2016 Page 5 of 5