Passive Components. Product Guide. The World's Leading Passive and Connector Specialist.

Transcription

1 Passive Components Product Guide The World's Leading Passive and Connector Specialist

2 Index

3 About TTI TTI, Inc. TTI European Operations are headquartered in Maisach-Gernlinden, near Munich, Germany. This purpose built facility occupies m 2, with m 2 of dedicated warehouse space on three levels. We provide local service in 29 sales locations across Europe. Our suppliers are the most innovative and capable in the electronics industry. With them, we put emphasis on know-how, focus products and logistics to provide our customers with industry leading service and market value. Mission Statement TTI is a speciality distributor of Passive, Interconnect and Electromechanical components that exists to accomplish three major goals: Be the most preferred electronics distributor for our customers and suppliers, delivering the right parts exactly on time. Exceed our internal and external customer requirements through continuous improvement. Provide a home for hardworking, dedicated, knowledgeable and ethical people who believe in this company and this philosophy. Why buy from TTI? TTI concentrates on the basic strategy of focusing on passive products and striving to be the best at what we do. No other company offers the unique combination of benefits we provide: World class Line Card Product knowledge experts Local sales and product support Broad and deep inventory profile Focused support for design-in Quality and reliability Full suite of supply chain services TTI was built from a buyer s point of view Page 1

4 Linecard - Passives Page 2

5 AVX AVX Ltd, a recognised leader in the global passive electronic component and interconnect products industry, is at the forefront of technology, design, manufacturing and supply. AVX offers customers the benefits of global manufacturing and distribution provided by 26 manufacturing facilities in 13 countries. With research and development centres in five locations around the world, AVX and TTI are committed to new product design to meet customer demand for miniaturisation, improved performance and reduced cost. AVX's broad range of components includes capacitors, resistors, timing devices, filters, integrated passive components and circuit protection. Featured below are a selection of exciting products from AVX offered by TTI. Ceramic Chip Capacitors Dielectrics NP0, X5R, X7R, X8R, X7S, Y5V FLEXITERM and FLEXISAFE TM offerings High temperature X8R and High CV TM range Capacitor arrays TM, standard and FLEXITERM Commercial, automotive, COTS+, CECC and MIL qualified Leaded Capacitors Ceramic, Tantalum and Film Dielectrics Axial and Radial Designs Automotive Ceramic Radial Range AR Military Qualified High Reliability Tantalum Devices TAZ - Military and Medical Range TBW - Fused Tantalum Capacitors CWR15 - Hi Rel Microchip CWR Military and COTS Plus SMD and Leaded available High Capacitance Ceramics X5R and X7R ceramic Up to 100uF offering Excellent ESR performance FLEXITERM termination finish available Commercial and automotive qualified Tantalum Chip Capacitors Miniaturised versions case sizes Very low ESR (multi anode versions available) Automotive range - THJ 175 C High Temp, TRJ TPM - Multi anode including 50V version HiCV + Low Profile TLJ 1.2mm height Pulse Super Capacitors High capacitance 20mF to 1F Very Low ESR down to 25 milliohm Low profile High power pulse capability Non-polar Film Capacitors Leaded and SMT Self healing provides safe open circuit failure mode No piezo effect Dielectric PET, PEN, PPS Dielectrics 16V to 630V voltage ranges 1206 to 6054 case sizes High Voltage / High Reliability Ceramics High voltage / high reliability ceramics Outstanding ESR / ESL performance Non-polar construction Capacitance availability to 1300uF RoHS options available Commercial, CECC, MIL, DSCC and ESCC qualified ranges OxiCap Niobium Oxide* Capacitors Non-burn solution Low voltage applications High capacitance (up to 1000uF) A,B,C,D,E,V case sizes 20% voltage derating Low ESR *Niobium oxide capacitors are made under license from Cabot Corporation Page 3

6 AVX RF and Microwave Devices Porcelain (P90) and NPO dielectric High current Hi Q Low ESR High stability See Feature Product Page Varistors (MLV and MOV) TransGuard to 1210, 3.3 to 60V 0405 and 0508 two element array versions 0508 and 0612 four element array versions Medium power versions CANbus, USB and AntennaGuard versions Leaded and SMT Tin / Lead (SnPb) finish MLCC NP0, X5R, X7R and X8R dielectrics Voltage range from 6.3 to 5000V Low inductance capability FLEXITERM soft termination capability Coupling, decoupling, filter and snubber circuits Filters EMI, SMT, Array Cylindrical, Bolt, and Soldering Systems High Current Feedthru Feedthru Arrays - 4 Element SAW Leaded and SMT Crystal Filters Thin Film Low Pass Filters FLEXITERM and FLEXISAFE Increases resistance to cracking Thermal / mechanical shock damage resistance FLEXITERM up to 2x standard bend test FLEXISAFE utilises internal cascade design FLEXISAFE improved ESD and ESR performance Timing Devices Ceramic resonators up to 60MHz SAW resonators Quartz crystal Clock oscillators Stable product Full range of case sizes 630V Ceramic Capacitors High capacitance 0.56uF Low ESR at high frequency Low leakage High current handling For SMPS, high voltage coupling and DC blocking NTC Thermistors Leaded and SMT Temperature range: -55 C up to 150 C Resistance range: up to 1M Ohms Measuring accuracy: 1 up to 5% RoHS part, lead free profile solder compatible LGA low inductance capacitors Two terminal simple construction / design 0204, 0306, 0508, 0805 case size Ultra low ESR (down to 27pH) High capacitance (up to 2.2uF) Land grid array for improved bond strength Other AVX Products Medium Power Film Capacitors High Power Film Capacitors Piezo Generators Thin Film Devices Fuses 0401 to 0612, up to 4 Amps Module Devices Integrated Passive Devices Page 4

7 AVX Feature Product AEC-Q200 Automotive Qualified Passive Component Offering AVX Ltd recognise the importance of such devices for this sector and much emphasis has been made to develop products in line with the tough constraints often imposed by the design engineering community. AVX Ltd is one of the passive component manufacturers that has led the way in developing technology, whilst being able to provide reliable product for safety critical applications. Design Engineers should consider these Automotive Solutions for other applications where high reliability is required. AEC-Q200 has been developed by Automotive manufacturers, AVX has developed and responded to this Automotive Standard and strongly recommend that parts qualified to this standard be used by the Design Engineer for Automotive Applications. Ceramic Chip Capacitors AECQ200 qualified ranges NP0, X7R and X8R availability FLEXITERM and FLEXISAFE TM ranges available Support Tools AVX corporate digital catalogue CD-ROM Tantalum / Niobium Oxide Capacitors TRJ, THJ dedicated automotive products THJ up to 175 C continuous operating temperature NOJ niobium oxide non-burn up to 8V applications Protection Devices Multi Layer Varistors - Transguard Canbus protection devices NTC Thermistors Hardcopy catalogues Automotive CD-ROM AEC-Q200 data package Application guides Timing Devices SAW devices for keyless entry SMD Resonators Telematics applications Presentation materials Samples readily available Page 5

8 AVX The future is now! AVX RF / Microwave components AVX offers a broad range of standard and custom products for RF / Microwave applications including: Bluetooth, RFID, GPS, WiFi, WiMAX, WiBRO, Zigbee and even optical applications, up to 40 Ghz. In addition they can provide products for higher power RF applications including medical MRI, semiconductor power supplies and impedance matching networks. Some examples of their technology leadership includes: the World s smallest high directivity coupler, the tightest tolerance RF inductors and capacitors. The unique and broad range of capacitors enables us to offer price / performance solutions ranging from P90 to NP0, to precision thin film devices for the best in next generation RF designs. High Directivity Couplers (0402, 0603) Very high directivity Low parasitics 4 terminal 3 Watts continuous Low profile (0.35mm) Directional Couplers (0603, 0805) 50 ohm impedance 800Mhz 6GHz 3 Watts continuous Low profile (0.60mm) RoHS compliant 3dB Couplers (0805) 0805 case size 10 Watts continuous 4 terminal Low insertion loss High isolation Low pass filter (0603) 50 ohm impedance 3 Watts continuous 800MHz 3.5GHz 4 terminal Low profile EMI Miniature Screw-in / Solder-in Filters World s smallest bulkhead filters 73mm diameter Screw-in and Solder-in style Superior insertion loss up to 10Ghz Available in L, C or T circuit Rugged discoidal capacitor design Inductors (0603, 0805) Very tight tolerance (B=0.1nH, D=0.5nH) High Q High self resonance High RF power capability Low DC resonance LGA Inductors (0402) Tight tolerance (A=0.05nH, D=0.5nH) Low parasitics Improved heat dissipation Low profile Taped and reeled Ultra Tight Tolerance RF Capacitors (Accu-P) Tight tolerance (P=0.02pF, C=0.25pF) No secondary resonances Repeatable performance (lot to lot) 0201 to 1210 case size Low ESR Low ESR Capacitors SQ (0603, 0805, 0505, 1111) Very low ESR High self resonance WVDC to 500 VDC High Reliability version available RoHS compliant High Power, Leaded RF Capacitors 600 to 4000 VDC High Current capability Low ESR Non-magnetic version available Axial ribbon / Microstrip Page 6

9 Bourns Bourns was founded over 60 years ago around a simple philosophy: provide top-quality products, responsive service and high value for customers. Bourns continually invests in new products, whether these are developed by the Bourns organisation or are the result of acquisitions or licensing of technologies. Bourns manufactures over 4,000 products and has manufacturing facilities and customer support teams located throughout the world. Bourns product offering is ideally suited to Telecom, industrial automation and control, EDP, test and measurement, medical and automotive and in many applications. Bourns offer high volume commercial panel controls, precision potentiometers, trimming potentiometers and networks, sensors and controls, encoders, speciality resistive products, circuit protection products, diodes, inductors & transformers, switches, integrated circuits, micro modules, as well as custom capabilities for numerous one-of-a-kind applications. Speciality Resistive Products Power Resistors RF Powers up to 800W max Thick film on ceramic Applications include drop in isolators, combiners, duplexers, heaters Surge Resistors Thick-film in TO220, Surface Mount Wire Wound Applications include Central Office, Networks, Inverters, Actuators, Braking Resistors Shunt Resistors Rated current of up to 150A TCRs of 20 PPM Minimum resistance values of less than 1 milli-ohm Applications include battery chargers, OEM power supplies, emergency power Diodes Diode Networks Rectifier Diodes Schottky Diodes Small Signal Switching Diodes Steering Diode Arrays TVS Diodes TVS Diodes Arrays Zener Diodes Switches Surface Mount and Through Hole Mounting PC pins, Gull Wing and J-Hook terminal styles 3, 4 and 6mm Sealed for board wash processes Tube and embossed tape carrier Circuit Protection Products Ceramic PTC Resettable Fuses Gas Discharge Tubes Hybrid Protectors - MSP ESD Protectors Line Protection Modules Polymer PTC Resettable Fuses-Multifuse Signal & Dataline Protectors Telecom Fuses - Telefuse TM Thyristor Surge Protectors-TISP TVS Diodes TVS Diode Arrays Inductors & Transformers Standard inductance values from 1nH to100mh Chip Inductors 20 models from 1mm to 4.5mm 86 SMD Power Inductors models up to 60Amps, shielded and non shielded, ferrite and corodial cores Common Mode Chokes and Line Filters Operating temperature up to +150ºC Sealed and open construction Line matching, RF, LAN (POE) and ADSL Surface Mount and Through Hole models Series includes CM, CF, CW, CI, SDR, SRR, SRP, SRU On-line Parametric Search J.W.Miller Magnetics Surface Mount Chip Inductors, Beads and Arrays Power Inductors (Shielded/Unshielded) Common Mode Chokes Common Mode Chip Inductors Inductors / Transformers High Current Toroid Inductors CCFL Inverter Transformers Multi 6 Pack Inductors / Transformers Through-Hole Wide variety and range of Chokes and Toroid Inductors On-line Parametric Search Page 7

10 Bourns Commercial Panel Controls & Encoders Encoders Incremental contacting, absolute contacting and rotary optical - all continuous rotation Mounting: bushing, PCB pins, PCB bracket and Snap In 6, 9, 12, 16, 22mm square, 16 x 21mm sizes Panel Controls Slide, rotary and linear motion potentiometers, and pot / switches with metal and plastic shafts Terminals: solder lugs, PCB pins, L-pattern, J-hooks, leadwire-flexible 6-22mm sizes Trimpot Trimming Potentiometers Multi-turn Top and side adjust Cermet and wirewound resistance elements 3mm mm Surface Mount and Through Hole Mounting Panel mount options Available in military approved versions (QPL and Hi-Rel) Tube, embossed tape carrier, bulk, radial tape & reel and ammo pack Single-turn Top, bottom, side, front and back adjust Cermet, wirewound and carbon resistance elements 2mm - 9mm Surface Mount and Through Hole Sealed and open-frame Tube, embossed tape carrier, bulk, radial tape & reel and ammo pack Resistor & RC Networks Surface Mount and Through Hole Mounting SIP and DIP packages Moulded and conformal-coat packages Standard resistance values from 10 ohms to 10 megohms SIP package height as low as inch Operating temperature range of -55 C to +125 C Chip Resistors & Chip Arrays Standard resistance values from 0.01 ohms to 10 megohms Chip resistors from 0201 to 2512-size Chip arrays from 0402 x 2-size to 0603 x 8-size Operating temperature range of -55 C to +125 C Thick Film and Thin Film Tolerances of 0.01% to 5% TCRs of 5PPM to 600PPM Industrial Encoders Bushing PC board Snap In Contacting - 6 PPR to 36 PPR options Optical - 25 PPR to 256 PPR options 9, 16, 22mm square and 16mm x 22mm Linear Motion Potentiometers Flexible Flying terminals Electrical travel from 2.54mm (0.1 ) to 12.7mm (0.5 ) 20 and 32mm Long mechanical life Essentially infinite resolution Lightweight Tube packaging Industrial Panel Control Bushing PC mount Snap In Linear Audio taper Custom taper 9 to 23mm Precision Control Bushing PC mount Snap In Servo mount Linear Audio taper Custom taper 13 to 51mm diameter Page 8

11 Bourns Feature Product Circuit Protection Solutions Bourns follows a dedicated strategy of offering full circuit protection solutions to satisfy individual customer needs. With an extensive range of passive and active components, Bourns helps solve the global need for overcurrent and overvoltage protection. Its range of products allows the safe operation of electronics in such diverse areas of cars to cell phones, set-top-boxes to industrial controllers and PCs to DSL line cards. Whether you require a single product or a complete solution, Bourns circuit protection range has the answer. Over-Current Protection Safety Reliability Compliance Multifuse Polymer PTCs Resettable fuse technology Surface mount options 0805, 1206, 1210, 1812, 2018, 2920 and 3425 Radial leaded solutions with operational current ratings up to 11 amps Polymer PTCs provide overcurrent protection Agency approved UL, TÜV and CSA Automotive Solutions Easy to use Multifuse product selection worksheet Ceramic PTCs Ceramic PTCs for overcurrent protection in telecommunication equipment. Ceramic PTCs provide line balancing and coordination between the primary and secondary overvoltage protectors. Packaging include: Radial Through hole Radial Through hole in ceramic casing Twin pack SMD Agency approved UL, TÜV and CSA Line Protection Modules Telecommunication line protection modules Secondary overcurrent protection High lightning withstand Integrated thick film, fuses and PTC s Through Hole and Surface Mount Telefuse - Telecom Fuses Surface Mount Telecom overcurrent protection Withstand lightning surge and AC power cross Over-Voltage Protection GDT - Gas Discharge Tubes TRIGARD - 3 electrode balanced GDT s Mini-TRIGARD MSP Protectors 2 electrode GDT s High voltage tubes (800V and 110V) 3 electrode GDT s TISP Thyristor Surge Protectors Planar technology Product optimised to withstand regional lightning standards Bourns technical teams work closely with chipset manufacturers to endorse the use of Bourns Surge Protectors ESD Protection Solutions Transient voltage suppressor (TVS) diodes Transient voltage suppressor (TVS) diode arrays Steering diode arrays Chipguard Multlayer Varistors Schottky Diode Arrays Active & Passive elements in a single package Excellent high frequency response EMI filtering networks ESD protection to industry specification IEC Minimum 8 kv contact and 15 kv air discharge ESD withstand SMT packages (0402, 0603, SOD323, SC70-6, SOT23-6, SOT143A, NSOIC) Page 9

12 Bourns Bourns Inductor Solutions A Commitment to Excellence. Inductive components have been part of the Bourns product line for more than 35 years. Currently offering 20 models of chip inductors and 86 models of power inductors or common mode chokes, Bourns inductor components are used in a wide variety of applications including cellular phones, keyless entry, cable television, global positioning systems, DC-DC convertors, power supplies, and in many portable electronic devices. SRU Shielded Power Inductors Features: SRU series 0.8µH to 330µH Octagonal form factor 2mm, 3mm, 5mm, 6mm, 8mm and 10mm sizes Advanced ferrite material for low DCR Common footprints across multiple device options Multiple model selection within one size RoHS compliant SRP High-Current Power Inductors Features: SRP series Currents up to 60A 1µH to 10µH DCR well below 1.0mΩ Form factors 7mm; 8mm; 10mm; 12mm; 13mm RoHS compliant SDR Non-Shielded Power Inductors Features: SDR round shape series Round shape where EMI is not an issue but higher current a must compared to equal sizes shielded 1.0µH to 15mH 3mm, 4mm, 5mm, 6mm, 10mm and 13mm sizes Current up to 20.0Amps DCR in mω range E12 Series RoHS compliant Chip Inductors for the Industrial and High-End Consumer Applications Features: CM and CF 45, 32 and 25, plus Model Advantage Matrix by case size Chip Inductors wire-wound and multi-layer 10nH to 1mH in 5, 10 and 20% tolerance 4.5mm, 3.2mm and 2.5mm sizes Current up to 800mA DCR in mω range E12 Series RoHS compliant Chip Inductor CM CF CM CF CM CF Product Size 4.5 x 3.2mm 4.5 x 3.2mm 3.2 x 2.5mm 2.5 x 2.5mm 2.5 x 2.0mm 2.5 x 2.0mm Body Height 3.2mm 1.5mm 2.2mm 1.3mm 1.6mm 1.6mm Product Range Inductance Range Current Range Technology Body Height Inductance Range Inductance Tolerance MOQ Current Price E12 series 0.1uH to 1.0mH 30mA to 800mA wire-wound E12 series 0.1uH to 33uH 160mA to 800mA multi-layer E12 series 47nH to 220uH 45mA to 450mA wire-wound E12 series 0.1uH to 33uH 70mA to 450mA multi-layer E12 series 10nH to 100uH 60mA to 280mA wire-wound E12 series 0.1uH to 33uH 110mA to 570mA multi-layer Page 10

13 KEMET KEMET Corporation is the worlds largest manufacturer of solid tantalum capacitors as well as providing leading edge technology in ceramic, film, paper and aluminium electrolytic capacitors. In summary, KEMET is the capacitance company. KEMET Corporation is a preferred supplier of capacitors to the world s most demanding customers of quality, delivery, and service. KEMET leads the capacitor industry in producing high-performance solutions including a complete line of Surface Mount Ceramic, Tantalum, and solid Aluminium technologies provided with nearperfect quality and on-time delivery at competitive prices to customer locations worldwide. KEMET s vision is to be the preferred supplier of standardised components among customers demanding the highest standards of quality, delivery, and service. Surface Mount Tantalum Capacitors Extensive selection of moulded tantalum chip capacitors Standard EIA chip sizes Low-ESR, low-esr surge robust and ultra-low ESR Single and Multi Anode Low ESR Solutions High Temperature Series Low profile, fail-safe fused 4V to 50V, in ±10%; ±20% capacitance tolerances Available in tape and reel packaging Multilayer Ceramic Surface Mount Capacitors case sizes 6.3V - 3KV 0.5pf - 100uF COG, X5R, X7R, Z5U and Y5V dielectrics AECQ200 automotive grade product Flex Crack Mitigation Solutions Polymer Tantalum Surface Mount Capacitors ESR as low as 6 milliohms Non ignition failure mode Standard EIA case sizes A - X Low profile case sizes Single and multi anode High temperature series 15uF - 1,500uF 2V - 25V Military and Hi Reliability Capacitors Ceramic, Solid and Wet Tantalum Mil-Spec capacitors Leaded and Surface Mount Ceramic MIL-PRF-11015, MIL-PRF-123, MIL-PRF-20, MIL-PRD-39014, MIL-PRF Tantalum MIL-PRF-55365, MIL-PRF-39003, MIL-PRF-49137, MIL-PRF Ceramic Hi reliability MIL-PRF-123, GR900 Series Tantalum Hi reliability GR-500 Series Surface Mount Inductors Multilayer chip inductors Wirewound chip power inductors case sizes 1nH uH MLCI for high frequency applications High current ferrite chip beads Multilayer ferrite chip beads Through Hole Tantalum Capacitors Radial and Axial Dipped, molded and herm seal Wet tantalum Military approved product RoHS compliant Through Hole Ceramic Capacitors Radial and Axial Dipped and molded Military approved product High voltage up to 3KV RoHS compliant ARCOTRONICS Film Capacitors SMD and Through-Hole Polyester, Polypropylene and Power Interference Suppression and Polypropylene A.C. Automotive and Specials Aluminum Electrolytic Capacitors SMD, Radial, Snap-In and Screw Terminal General Purpose and Low Impedance Ceramic Safety Capacitors Y1 / X1 and Y2 / X1 Wet Tantalum Capacitors BS, CECC, ESA/SCC, IEC QC, DEF STAN, GAM T1 High Temperature and Ultra Hi-CV EMC-RFI Filters Page 11

14 KEMET Polymer Aluminium Surface Mount Capacitors ESR as low as 10 milliohms High cap rentention at high frequency No dry out failure mechanism No voltage derating up to 125 C V, D and X cases 6.8uF - 470uF 2V - 16V Automotive Grade Ceramic and Tantalum Capacitors AECQ200 qualified products Surface Mount or Through Hole Ceramic and tantalum complete range Sierra KD Product High Voltage Leaded Ceramic (500 VDC - 10K VDC or better) High Voltage Ceramic chips (500 VDC - 10K VDC) High Temperature Leaded Ceramic (+200 and +260 C) EMI filters Electro-Magnetic Interference Stacked Ceramic (HV and HT) Evox Rifa Capacitors Film capacitors - precision, pulse, EMI Suppression and general purpose Paper capacitors - EMI Suppression Surface Mount and Through Hole BHC-Aluminium Electrolytic Capacitors - Snap In, Screw Terminal and Solder Tag SPICE software from KEMET Are you sure that s the capacitor you need? /go/kemet Page 12

15 KEMET Feature Product KEMET's Flex Crack Mitigation Solutions With design advances in multilayer ceramic capacitors (MLCC), has come a new challenge for the design engineer, and that has been a Low IR or short circuit situation due to small cracks close to the end terminations of the ceramic capacitor. This is attributed to board flexing, however, board flex cannot be eliminated by the capacitor manufacturers. KEMET has taken steps to develop a product portfolio that offers the engineer a number of different reliability solutions, should the problem occur. The KEMET Flex mitigation portfolio consists of four solutions which are... Floating Electrode - FE Cap The internal construction diagram (above) shows that the electrodes are configured to form multiple capacitors in series within a single MLCC package. This not only yields improved voltage and ESD performance over standard designs, but also mitigates the risk of low-ir or short-circuit failures that can occur due to board flex. Case sizes available are from 0402 to Open Mode - Fail Open This design greatly reduces the likelihood of a low-ir or short circuit condition in a board flex situation. When flexed to failure KEMET's "Open-Mode" capacitor may experience a drop in capacitance but a short is unlikely because the crack won't typically cross opposing electrodes (this has been confirmed in extensive testing). Since there won't be any current leakage associated with a typical "Open-Mode" flex crack there is no localised heating and, therefore, no chance for a catastrophic and potentially costly failure event. The Open Mode product is available in case sizes. Flex Term - FT Cap The FT-CAP is a surface mount Multilayer ceramic capacitor that incorporates a unique and flexible termination system. Integrated with KEMET s standard termination materials, a conductive epoxy is utilised between the conductive metallisation and nickel barrier finish in order to establish pliability while maintaining terminal strength, solderability and electrical performance. This technology directs board flex stress away from the ceramic body and into the termination area. As a result, this termination system mitigates the risk of low-ir or short-circuit failures associated with board flex. Available in case sizes from , the FT Cap offers the greatest range of capacitance and voltage (CV). Floating Electrode and Flex Term - FF Cap Combining two of the technologies above, KEMET will introduce the FF cap, utilising the Floating electrode construction, along with the flexible termination system. The CV offering will be the same as the FE Cap, but the addition of the flexible termination offers the design engineer a much more flex robust and reliable solution for MLCC products. Page 13

16 KEMET Feature Product T528 Series Surface Mount Polymer Tantalum capacitors with face down terminations The new Conductive Polymer T528 Series combines ultra low ESR (Equivalent Series Resistance) and high capacitance in a new package design that offers the lowest ESL (inductance) in the market for this type of product. The initial offerings are targeted for high speed server and microprocessor decoupling - designs that are driving the demand for low inductance chips. The continuous demand for greater capacitance and voltage in smaller case sizes, has caused KEMET to look at alternative construction methods as well as looking at improved materials to deliver what the design engineer is looking for. The T528 series uses a face down termination construction, that increases the volumetric efficiency of the capacitor, and at the same time delivers the lowest inductance levels of any polymer tantalum capacitor on the market. The current cap value offerings range from 68uF to 470uF with voltages from 2.5V to 10V. ESR ratings are as low as 9 milliohms and ESL as low as 0.7nH at 20MHz. KEMET is planning to take this technology to smaller case sizes and larger capacitance values to extend its leadership position in the polymer tantalum product offering. All products in this series are fully RoHS compliant and samples are available from TTI. Features & Benefits Ultra low ESR Low ESL - <20nH at 20 MHz Improved volumetric efficiency High frequency cap retention Non ignition failure mode Page 14

17 KOA KOA Corporation, founded in Japan in 1940, is a major supplier of passive components with 4000 employees and 24 factories worldwide, supporting our strategic service, sales and logistic centres. Our emphasis on a worldwide presence allows us to focus on our global customer s needs and offer Best-In-Class service. A broad product portfolio, together with an excellent engineering team ensure high quality and innovative technical support. As you search for Surface Mount passive components that will ensure the optimum performance of your circuit design, count on the broad line of products from KOA. Thick Film Flat Chip Resistors and Networks Resistors, jumpers and test points Sizes (inch) Temperature range C Tolerances % T.C.R. down to 50 ppm/k Networks with concave, convex (square or scalloped corners) terminations Speciality Thick Film Flat Chip Resistors Pulse / ESD Surge Proof Resistors SG73 (S / P) High Voltage Proof Resistors HV73 Inverse Geometry Resistors WK73 Precision Thin Film Resistors and Networks / Integrated Passives Precision Thin Film Flat Chip Resistors RN73 (H) Precision Thin Film MELF Resistors RN41 Integrated Passive Components KPC - Thin Film on silicon technology (R, C, D, Tr) / IC Packages Low Ohm Shunt Resistors in Thick Film and Metal Plate Technology Sub-Milliohm Shunts 3-6 W PSB / PSI Milliohm Metal Plate Shunts TLR High temperature (180 C) Shunts SL(N) Thick Film Shunts UR73(D), SR73 Inductors and LTCC Substrates Wirewound and Thin Film inductors All custom engineered LTCC substrate foundry service for RF, high temperature and high reliability applications, interconnect and packaging solutions. Thermistor and Protective Devices NTC, PTC Thermistors, and Pt-Sensors Multi-Layer Varistors Chip Current Fuses Page 15

18 KOA Feature Product High temperature stability Thin Film chip resistors are suited for tough environments KOA s RN73H series Thin Film chip resistors have been designed to offer low tolerance precision resistor solutions for tough environments, especially in automotive and industrial applications. The useable temperature range extends to +155 C while the available T.C.R. reaches as low as +/- 5 ppm/k. An anorganic protection layer in combination with a heat resistant epoxy coating on top of the enhanced NiCr resistive element yield superior moisture stability. The choice of materials enables the use of this product in tough environmental conditions, i.e. high levels of relative moisture and high ambient temperatures. Application examples comprise electrical and electrically powered hydraulic steering aids and engine controllers in the motor compartment of automobiles. The available standard sizes of the new RN73H series have both more rated power and higher rated temperature than the standard 125 C Thin Film resistors. At 85 C rated temperature, nominal power dissipations of 0.1 W (0603 size), W (0805), and 0.25 W (1206) with a minimum tolerance of 0.05% are available. Product Highlights Precision Thin Film Resistor RN73 High Precision up to 0.05% / 5 ppm/k Superior long term stability New Product RN73H Extended temperature range up to 155 C Excellent moisture resistance by glass passivation Applications: ECU, instruments, medical, sensors Page 16

19 Lelon Total Solution for Electrolytic Capacitors Lelon was established in Currently, Lelon has 5 production facilities in Taiwan, China and Malaysia and has become one of the major electrolytic capacitor manufacturers in world. Lelon offers a diversified product line of Electrolytic Capacitors, which includes Aluminium Electrolytic Capacitors (Radial, Axial, Snap In, Screw Terminal and V-chip), Tantalum Chip Capacitors and Conductive Polymer Aluminium Electrolytic Capacitors (OC-Con). As the result of Lelon's commitment to quality over the years, Lelon has been awarded a series of quality certificates such as ISO-9001, ISO and TS Striving for being the best, continuous improvement in all areas is the consistent spirit and attitude at Lelon. Conductive Polymer Aluminium Electrolytic Capacitors (OC-Con) 5m ohm available 2.5V - 35V 6.3 x 5-10 x 13mm 2000hrs assured Ultra low ESR and higher ripple current Longer useful life Snap In Type Up to 500V 85 C C hrs assured 20 x x 100mm Anti-Vibration structure available Flame-Retardant design available SMD Type 4V - 450V 85 C C hrs assured 3 x x 16.5mm Low ESR and high reliability Lead-free reflow reday Low ESR and High Reliability type 6.3V - 450V hrs assured 4 x 5-18 x 45mm Standard Radial/Axial Type 4V - 500V 85 C C hrs assured 3 x 5-25 x 50mm Screw Terminal Type Up to 500V 85 C C hrs assured 35 x x 220mm Customised specifications available Chip Tantalum Electrolytic Capacitors Low profile, small size and large capacitance series J size (EIA 1608) available -55 C C 2000hrs assured General purposes Low ESR type Page 17

20 Lelon Feature Product New Generation of Aluminium E-Cap - OC-Con OC-Con is a new generation of Aluminium electrolytic capacitor with organic conductive polymer as electrolyte. Due to its excellent electrical characteristics and heat resistibility, OC-Con can provide a better solution for Low ESR and Large Ripple Current requirements. V-Chip Type Through Hole Type OCV 105 C, 2000 hours assured Standard OC-Con with very low ESR Voltage 2.5V - 25V Capacitance 6.8uF uF Size 6.3 x 6mm - 10 x 13mm OCR 105 C, 2000 hours assured Standard OC-Con with very low ESR Voltage 2.5V - 25V Capacitance 6.8uF uF Size 6.3 x 5.5mm - 10 x 12.5mm 125 C OCVU 125 C, 2000 hours assured Voltage 2.5V - 16V Capacitance 100uF uF Size 6.3 x 6mm - 10 x 13mm 125 C OCRU 125 C, 2000 hours assured Voltage 2.5V - 20V Capacitance 47uF uF Size 8 x 11.5mm - 10 x 12.5mm New OCVZ 105 C, 2000 hours assured Ultra low ESR Voltage 2.5V - 6.3V Capacitance 100uF uF Size 6.3 x 6mm - 10 x 13mm ESR 5m ohm available New OCRZ 105 C, 2000 hours assured Ultra low ESR Voltage 2.5V - 6.3V Capacitance 22uF uF Size 6.3 x 5.5mm - 10 x 12.5mm ESR 5m ohm available Page 18

21 Littelfuse As the global leader in circuit protection, Littelfuse offers the broadest range of products. The breadth of our offering, combined with the extensive experience of our product and application experts, gives us the unique ability to comprehensively evaluate our customers needs. This allows for a true partnership with our customers, making it possible to deliver the right solution for each application. Solutions from Littelfuse can be found around the world in virtually every product that requires electrical part and every application including: automobiles, computers, consumer electronics, handheld devices, industrial equipment and telecom / datacom circuits. Fuses Styles: Surface Mount, Axial, Glass, Ceramic, Thin Film, Nano2, Fast-Acting, Slo-blo Current ranges: 0.010A - 35A Maximum voltage ranges: 32V - 600V Interrupting ratings from 35A - 200,000A Lead-free and RoHS parts available Resettable PTCs Styles: Surface Mount and Radial Leaded Surface Mount: plug and play applications Radial: 30VDC and 60VDC ratings Component Program of Underwriters Laboratory recognised Component Acceptance Program of CSA recognised TUV recognised Varistors Metal Oxide Varistors (MOVs) Peak current ratings: 40A - 70,000A Peak energy ratings: 0.1J - 10,000J Styles: Radial Leaded, Axial Leaded, Surface Mount, packaged, and bare-disk options Multilayer Varistors (MLVs) Peak current ratings: 20A - 500A Peak energy ratings: 0.05J - 2.5J Low voltage range: 0-120VDC Applications: computers, handheld devices, industrial markets, automotive markets Gas Discharge Tubes (GDTs) Styles: small foot print leaded and Surface Mount configurations Handles high current surges - up to 40,000A Suppresses overvoltage transients Low capacitance: 1-2pF High insulation resistance: 1GΩ+ Low leakage Applications: broadband cable, main distribution frame, central office, and access TVS Diodes and TVS Arrays Suppresses overvoltage transients such as EFT, inductive load switching and lighting Peak pulse power: (10/1,000µs) ratings from 400W - 15,000W Reverse standoff voltages: 5V - 376V Silicon-based circuit protection Applications: computers, handheld, industrial markets, telecom markets, automotive markets PulseGuard ESD Suppressors Styles: Surface Mount (1,2, and 4 channel) and connector array form factors Capacitance value: 0.050pF Protects high-speed digital I / O lines such as: HDMI, DVI, USB 2.0, and IEEE 1394 Operates at speeds of 1Gb/s+ Protects against ESD transients per the IEC (level 4) test method Lead-free and RoHS parts available SIDACtor Devices Suppresses overvoltage transients Solid state crowbar devices Protects telcom equipment during hazardous transient conditions Patented ion implant technology Surge current ratings: up to 5,000A Applications: telecom and datacom Thyristors Solid state switches Very high impedance Withstands rated blocking / off-state voltage until triggered Controls the flow of electrical currents Applications: home appliances, electrical tools, and outdoor equipment Littelfuse Line of Thyristors: Sensitive Triacs, Triacs, Quadrac Devices, Alternistor Triacs, Sensitive SCRs, SCRs, Rectifiers, Dias, and Sidacs. Page 19

22 Littelfuse Feature Product The World s Leading Provider of Circuit Protection Solutions Offering unmatched technical expertise and an industry leading portfolio of circuit protection solutions. Resettable PTC (Positive Temperature Coefficient) devices can protect the circuit from an overcurrent event without requiring replacement thus allowing the end product to continue operation without interruption of service. PTCs are ideal for use in applications where overcurrent circuit protection is necessary but its location within the circuit is not easily accessible to a user or technician. TVS Diodes and TVS Arrays Suppresses overvoltage transients such as EFT, inductive load switching and lighting Peak pulse power: (10/1,000µs) ratings from 400W - 15,000W Reverse standoff voltages: 5V - 376V silicon-based circuit protection Applications: computers, handheld, industrial markets, telecom markets, automotive markets Thyristors Solid state switches Very high impedance Withstands rated blocking / off-state voltage until triggered Controls the flow of electrical currents Applications: home appliances, electrical tools, and outdoor equipment Littelfuse Line of Thyristors: Sensitive Triacs, Triacs, Quadrac Devices, Alternistor Triacs, Sensitive SCRs, SCRs, Rectifiers, Dias, & Sidacs. Applications Fuses Styles: Surface Mount, Axial, Glass, Ceramic, Thin Film, Nano2, Fast-Acting, Slo-blo Current ranges: 0.010A - 35A Maximum voltage ranges: 32V - 600V Interrupting ratings from 35A - 200,000A Lead-free and RoHS parts available Consumer electronics Handheld devices Industrial equipment Telecom / datacom applications Automotive applications Computers PTC Selection Table Page 20

23 Murata Murata has the leading edge components for your demanding applications and makes sure you design-in high quality and technology. Murata Manufacturing Co. Ltd... the integrated electronic components manufacturer. It s rigorous design rules and extensive pre-release testing ensure total quality from day one. Known as the Innovator in Electronics for over 50 years, Murata is fully RoHS compliant, ISO / TS certified around the world and ready to support the next generation of electronic equipment in the market. Murata s product line-up includes Capacitors, Resistors / Thermistors, Coils / Delay Lines, EMI Suppression products, Resonators, Piezo Sound Components, Microwave Filters and Modules, Sensors, Optical Products and Power Supplies. Capacitors Made of own superior ceramic materials Meet the demand of a wide variety of applications (Automotive, RF / Microwave) Voltage ratings from under 3V to several thousand volts Based on own unique design and processing technologies Case sizes from ultra small to 2220 Trimmer Caps EMI Suppression Components Designed for use on signal lines and in power supply & general electronic circuits Product range includes ferrite beads, ferrite cores, common mode chokes and a variety of other components to effectively suppress noise Full availability of technical support including design kits, application manuals and a comprehensive set of software tools to simulate virtually any circuit condition Hi-Caps Capacitance value from 1µF up to 100µF High performance replacement for tantalum and electrolytic devices Contributing to size and cost savings Superior performance over other dielectric materials Case sizes from 0402 to volt to 100 volt No polarity Chip Inductors and Delay Lines Product range includes a variety of coils; choke coils, general-purpose and high-frequency chip coils Provide low-loss and high-q characteristics at high frequencies Choose from monolithic, film or wire wound construction Wide range of inductance values and tolerances Sensors Using own piezoelectric ceramics and magnetic resistive elements Detect heat, infrared, ultrasonic waves, vibration, acceleration, angular velocity, angular rotation, magnetism and electrical fields Pyroelectric Infrared Sensors / Fresnel Lens Piezoelectric Gyroscope "GYROSTAR" Rotary Position Sensors Thermistors / Potentiometers Product range includes both PTC "Positor" and NTC devices to detect overheating in electronic equipment, protect circuits, and compensate temperature Also on offer a broad range of trimmer potentiometers using both carbon and cermet materials Piezo Sound Components Include piezo buzzers, sounders, diaphragms, receivers and ringers New mass production of extremely high quality tweeters for use in high end audio systems Commercialised Spherical Speakers and Spherical Tweeters Resonators Full range of small and thin ceramic resonators High oscillation frequency and oscillation tolerance Own ceramic processing technology and own unique piezoelectric material Designed for use as a stable timing source for microprocessors Include SAW resonators for use at higher frequencies Page 21

24 Murata RF & Microwave products The RF & Microwave products include antennas, RF diode switches, RF sub modules, dielectric filters, ceramic filters, dielectric resonators, high frequency coaxial connectors, isolators, chip multilayer hybrid baluns & couplers, and VCOs Filters Complete range of cost effective band pass filters Excellent selectivity, optimum stopband attenuation, flat band pass characteristics and high stability World s foremost manufacturer of ceramic filters Superior quality and performance Manufactured from the finest ceramic materials on highly efficient, automated assembly equipment Modules for Audio Visual equipment, Communication equipment and Bluetooth, Opto, LTCC, Power Supplies Murata offers a wide variety of high technology special products as Bluetooth modules, hybrid modules, DC-DC converters, power supplies, optical products, LTCC substrates and high voltage products Get to know MURATA BOY What is MURATA BOY made of? Ultrasonic Sensor Lumicera Bluetooth Module Lithium Ion Rechargable Battery Gyro Sensor DC-DC Converter Shock Sensor Thin Flat Speaker * In addition to the components above, MURATA BOY features many of Murata s electrical components such as Chip Monolithic Ceramic Capacitor, Ceramic Resonator (CERALOCK ), NTC Thermistor, Trimmer Potentiometer, and EMI Supression Filter (EMIFIL ) Page 22

25 Murata Feature Product EMIFIL The trend towards miniature multi functional devices operating at increasingly higher frequency brings with it the problem of noise suppression. Murata offers noise suppression products "EMIFIL" that are designed for use on signal lines and in power supply & general electronic circuits. Murata s EMIFIL products range includes: ferrite beads, ferrite cores, common mode chokes and a variety of other components to effectively suppress noise. Murata offers technical support and guidance based on many years of experience operating in the field of noise suppression. Murata s technical support includes: design kits, application manuals and a comprehensive set of software tools to simulate virtually any circuit condition. Page 23

26 Murata Feature Product CERALOCK Murata s ceramic processing technology and unique piezo-electric material has led to the development of a range of small and thin ceramic resonators "CERALOCK" that offer high oscillation frequency and remarkable oscillation tolerance. These products are designed for use as a stable timing source for microprocessors. Murata also offer SAW resonators for use at higher frequencies to complete the range of frequency control products. Page 24

27 Nichicon The Nichicon Corporation was founded in Kyoto, in Since those early days Nichicon has become a leading manufacturer and supplier of electrolytic capacitors supporting nearly 14% of world demand. Nichicon has very large capacitor production resources in Japan and Asia. Nichicon also processes in house 90% of their aluminium foil, which secures the raw material, ensures quality and enables continuous product development. Nichicon has all ISO, QS and TS approvals for all its 19 factories. However, not intent with the status quo, Nichicon is always pushing the limits of technology to provide new solutions for circuit design. The main themes of development are: miniaturisation, low ESR, high ripple, longer life and higher temperature endurance. All Nichicon products are RoHS compliant and environmentally friendly designed. Nichicon prides itself on its service. Its "Can do" attitude means that it puts customers first and always seeks to exceed expectations. If we "Can do" we will! It is this simple principle which has made Nichicon a strong player in the world capacitor market. Nichicon provides local market support from sales offices in USA, Asia and Europe. This is enhanced further by the close working relationship with TTI, whose worldwide coverage and expertise in passive components offers a service which is hard to match. Surface Mount 3mm ZD series Low impedance CD series High temp UB, UH series Long life CB, CW series Large Can Standard 85C LG series Standard 105C GG series Long life 105C GX, GY series Through Hole, Radial High temp. BT, BW, BX series Long life PX series High ripple CS series Low impedance HE series Tantalum Conformal coated F95, F75, F73 series Page 25

28 Nichicon Feature Product High Performance Capacitors Nichicon is proud to present, from his extensive product range, certain High Performance Capacitors. Nichicon is continually pushing back the boundaries of technology as it has to be for a technology leader in its industry. For High Performance Capacitors Nichicon is able to offer various solutions for example with EDLC technology (EverCap) for Capacitance values up to 4000F - Anti Vibration type SMD Capacitors (UE and BC series) absorbing vibration up to 30G - high temperature 150 C devices in SMD (BC series) and THT (BX series) version - extremely high ripple current and very low ESR in Polymer Capacitor Type Technology (CF and LF series) - long life up to 105 C (PX series). EverCap Series Double layer technology Available in Radial, Snap In and Screw Mount Type Up to 4000F standard capacitance UE Series Antivibration type Life up to 5000h Temp. range 125 C Applications Industrial Solar power generation Wind power generation Applications Automotive Industrial BX Series High reliability Temp. range 150 C Wide CV range Applications Automotive Power supply Polymer Series Solid electrolyte technology Very high ripple, low ESR Available in SMD and THT Applications Automotive IT sector PX Series Longest life assurance at +105 C Long life up to 20000h High reliability Low impedance Applications Automotive Medical Page 26

29 Panasonic Through continuous improvement in its worldwide production sites, Panasonic is able to manufacture billions of resistors on the highest level of quality. Furthermore Panasonic invests a lot in research and development to achieve or exceed the market requirements. One of the major ways in which Panasonic Industrial Europe supports businesses is by providing equipment for manufacturing facilities. Panasonic is one of the industry s leading suppliers of standard and customised electronic components. With a wide product portfolio coupled with global manufacturing and sales capabilities, as well as the commitment to customer service Panasonic meets today's market needs in terms of design support, single sourcing and global presence. Our comprehensive lineup ranges from devices as small as the tip of a finger to equipment for entire factories. We are ready to help your company s business integrating our technology with yours at production sites worldwide to create hit products for the 21st century. Panasonic Industrial Europe gives our customers the convenience to source a great majority of their components, peripherals, automation equipment, industrial batteries and much more from a single supplier and thereby easing the procurement process. Snap In Capacitors TS-EE Series Combine very high ripple current capability with small size Working voltage ratings of 200V, 250V, 400V and 450V Capacitance value from 56uF to 1800uF Guaranteed life 3000 hours at 105 C with maximum rated ripple Sizes range from 22mm x 25mm to 35mm x 50mm 2-pin and 3-pin terminal SMD Power Choke Coils Wide range of inductance values up to 1mH Low DC resistance and large current capability Minimised case sizes available by adhesive shield technology Shock resistance series available RoHS compliant Saturation currents up to 50A High peak currents without saturation Low AC resistance over 500kHz Speciality Polymer Capacitors The SP-Cap from Panasonic is a SMD Aluminium electrolytic capacitor that uses a conductive polymer as its electrolyte. SP-Caps are primarily used as input and output capacitors for DC/DC converters, due to their ultra low ESR values. Wide CV range starting from 2V up to 16V with capacitance values from 2.2uF up to 560uF Very stable electrical performance against DC Bias, frequency and temperature 125 C series is available No voltage derating required for SP-Caps, unlike Tantalum caps High reliability against short circuit compared with tantalum capacitors Extremely good ripple current capability (up to kHz) High temperature types for lead free soldering are available RoHS compliant range Chip Inductors ( ) Ultra small Chip Inductor series (0201, 0402 case size) High Q-factor series High power types for high current loads Wide inductance range (1nH up to 1mH) High SRF series RoHS compliant Excellent for high frequency applications Choke Coils High inductance values up to 10mH Low leakage magnetic flux High current capability Perfectly suited for switching power supply RoHS compliant Thin Film Chip Resistors - high reliability type E96 High-reliability under hard environmental conditions (all series) Guaranteed for a loading life of 1000h at 85 C, 85% relative humidity Operating temperature range: -55 C to +155 C High precision and low T.C.R. (Temperature coefficient of resistance) Resistance tolerance: 0.1%, 0.5% T.C.R.: +/-25 x 10-6/ C, +/-50 x 10-6/ C Wide Resistance Range 0603 size: 10O to 330kOhm 0805 size: 10O to 1MOhm Low current noise, excellent non-linearity Reference Standards: IEC ; JIS C ; EIAJ RC-2133A Corresponding to AEC-Q200 MELF REPLACEMENT by SMD Anti-Surge Resistors High power ratings Low surface temperature rise High pulse resistance High ESD resistance Excellent long term reliability Square Reflow Light Touch Switch Type EVQQ2 Compact and thin design: 6.5 mm x 6.0 mm, 1.8 mm high Added an overstroke type: operating stroke: 0.35 mm A wide variety of operating forces: operating forces: 0.5 N to 5.0 N Page 27

30 Panasonic Feature Product Electric Double Layer Capacitors Panasonic Electric Double Layer Capacitors (Gold Capacitors) were developed by the Central Research Laboratory of Panasonic in 1972, then, introduced to the market on a commercial basis in As these capacitors perform like a battery they are ideally suited for applications requiring a secondary power source such as backup energy for microprocessors (real time clock etc.) and energy storage for chargers or solar batteries. Panasonic Gold Capacitors are the ideal replacement of a secondary battery. Their main advantages against a battery are: Quick charge and discharge available No charge and discharge cycle limitation Green product (RoHS compliant, no hazardous substances used, like lead or cadmium) No recycle restriction No charging protection circuit needed, easy circuit design Maintenance Free and a very long life Panasonic Gold Capacitors are available up to 5.5 Volt and up to 70 Farads. There are three different packages (coin, stacked coin, radial leaded) available, design depends on backup current and soldering conditions (flow / reflow). For higher ambient temperature applications Panasonic offers an 85 C product. SMD Gold Capacitor EP Series For Reflow Soldering Panasonic introduced the first SMD Gold Capacitor in The latest product with this technology is Panasonics new EP series. This EP series is the world smallest Electric Double Layer Capacitor. The size code is 311, which means 3.8 mm dia with a height of just 1.1 mm (excluding terminals). In comparison to the current EN (size code 614) series this is a volume reduction of approx. 70%! Due to this size the product is suitable for all small mobile devices, e.g. mobile phones, keyless entry systems, thermocontrol units or PDA's. With more and more advanced functions, these devices require backup solutions for memory backup and clock function. Applications Replacing a battery, for example in: Real time clocks Solar applications Toys Metering equipment (Water, Gas, Electricity) Memory backups Cash register systems Control units Measurement equipment Bicycle lamps Page 28

31 Spectrum Control Spectrum Control, Inc. is established as one of the world s leading manufacturers and total solutions providers in the suppression or elimination of electromagnetic interference. Since 1968 SCI s EMI filters have been an integral part in a vast range of applications including military secure communications, aerospace, missiles, rockets, military and commercial avionics, telecommunications, industrial controls, and medical equipment. SF Series - Three Terminal Chips Standard EIA chip sizes from 0603 to 1806 Excellent performance in high current applications Non-polar, surface mountable Capacitance range of 22pF to 220,000pF Rated voltage up to 100VDC Current rating up to 2A Applications: cellular telephones, base stations, telecom equipment, industrial electronic interface, programmable controllers, electronic automotive equipment, computer and peripheral equipment SA Series - SM Filter Arrays Structure minimises residual inductance with a high self resonant frequency ensuring large insertion loss in a wide band Designed to control cross talk Solder plated nickel barrier terminations 25VDC to 50VDC, 0.3A, IR 10,000MΩ Min, DCR 0.3Ω Max, -55 C to +125 C, 22pF to 22,000pF Applications: noise reduction for DC lines and computers, computer peripheral equipment, digital TV and VTR, cellular telephones, automotive electronics LC Chips Ideally suited for high frequency signal lines Steep IL characteristics Cut-off frequency ranges of 10MHz to 220MHz 25V, 100mA, 10MΩ, -40 C to +85 C Applications: telecommunication equipment, fax, modem, and ADSL, computer and peripheral equipment, digital AV equipment, TV, VCR, and DVD, digital circuit equipment noise countermeasure High Frequency PCB Filters Easy installation - mounts directly to PCB without bracket or plate and begins filtering at the source of the problem Encapsulated for environmental protection 50 VDC, 10A, 800pF, -25 C to +85 C Applications: low power digital circuits, FCC and VDE compliant equipment Filtered Connectors Filtered D-Sub connectors with ferrites, multilayer capacitors or tubes Wide range of capacitance values and insertion loss range Temperature ranges from -55 C to +125 C; Pin and socket contact, broad range of contact layouts High-density series available Filtered combo connectors for filtering of signal, power and coaxial contacts with high performance coaxial feed-thru capacitors for 48 V DC Communication interfaces - RJ45, USB Filtered circular connectors Applications: personal computers, peripheral equipment, industrial equipment, cellular base stations, medical electronics, switching and transmission equipment, secure-communications, aerospace applications PSM Series - Power Surface Mount Filters Optimum cost savings compared to Through Hole filters Current ratings up to 20A in Ft circuit, 10A for Pi circuit 200VDC; 125VAC Capacitance range from 68pF to 10,000pF Tape & reel or bulk packaging Applications: power amplifiers, power supplies, temperature and motor controls, high current bus-lines and driver circuits and medical equipment MSM Series - Miniature Surface Mount Filters Miniature footprint (0.078 x ) 50VDC, 10A, 47pF to 1,000F, Ft circuit Superior solderability and heat resistance due to multi-layer electrode construction Tape & reel or bulk packaging Applications: automotive electronics, computer and peripheral equipment, microwave transmissions, test equipment, DC power supply lines and medical equipment SSM Series Square Surface Mount Filters Square mechanical geometry enhances soldering to PCB Compact footprint for densely populated PCBs 100VDC, 10A, 100pF to 4,000pF, Pi circuit Tape & reel or bulk packaging Applications: power amplifiers, power supplies, temperature and motor controls, high current bus lines and driver circuits and medical equipment Page 29

32 Spectrum Control Feature Product Filter Expertise to Board Level Components Spectrum Control, Inc. has extended their filter expertise to board level components with the introduction of a complete line of Surface Mount EMI filters. Our family of surface mount filters offer high performance filtering with minimal PCB footprint. Resin Sealed Bolt-In Filters Wide range of sizes: 4-40 thread through 5 / UL / CSA and MIL-F approved filters Current ratings up to 100A Voltage ratings up to 1250VDC / 240VAC (400Hz) Custom lead options available: hooked, turret, flattened, notch. Various lead lengths available Multiple circuit configurations - C, L, Pi Many off-the-shelf distributor items Provides excellent environmental protection with rugged case and resin seals at both ends Miniature Solder-In, Press-In, and Spec Spin Filters Miniature size Capacitance values from 5pF to.030µf Voltage ratings to 200VDC / 115VAC Hz Gold plating compatible with gold bonding techniques High temperature construction Available in Mil-C versions Ideal for microwave and RF applications Solder-In Filters Small size options Multiple circuit configurations C, L, Pi Voltage ratings to 750VDC High temperature construction MIL-F QPL versions available Custom lead options available: hooked, turret, flattened, notched Many lead length options offered Ideal for filtering signal / data lines and DC power lines Hermetically Sealed Bolt-In Filters Popular / and case diametres Voltage ratings from 50VDC to 400VDC / 240VAC Filter configurations available in C, L, Pi, T and double T Largest selection of MIL-F-15733, MIL-F Mil-PRF and DSCC filters Provides broadband high performance from 10KHz to over 10GHz Excellent for critical applications demanding high reliability in harsh environments Applications Telecommunication Amplifiers Motor Controls Microwave Attenuators Oscillators Industrial control Medical equipment Rocket ignitors Aerospace Military avionics and secure communications RoHS Compliant Product Readily Available Page 30

33 Syfer Syfer Technology is the premier global source for application specific ceramic multilayer capacitors and EMI Suppression filters. Syfer manufactures high voltage, safety, surge protection and FlexiCapTM capacitors as well as 3 terminal EMI, Pi & X2Y Filters. Syfer's unique wet process production gives unrivalled quality and reliability with approval to ISO 9001:2000 and ISO coupled with product approvals to CECC, TÜV, UL and AEC Q200. High Voltage Ceramic Capacitors Chip capacitors up to 6kV Sizes up to 8060, with wide capacitance ranges available Tip & Ring / Ring Detect, 250Vdc rated Safety Capacitors - Class X & Y Class X1, Y2, X2 Approved by TÜV and UL Approved & Certified to EN132400, IEC and UL 1414 Size Capacitance values from 150pF to 10nF Large Case Size Capacitors Syfer is committed to supporting large case size requirements From typically 1206 to 2225, but up to a maximum of 8060 Low and high voltage versions available Application Specific Capacitors 150ºC X8R capacitors Low profile Tight tolerances available Surge Protection Capacitors Class X1, Y2, X2, Y3 Approved by TÜV and UL BS CECC For use in equipment certified to meet IEC Sizes 1808, 2211 & 2215 CECC Approved Chip Capacitors Approval to CECC Case sizes Voltages from 50V to 200V CECC approved Radial Leaded types also available to BS CECC Surface Mount EMI Pi-Filters 1A, 5A & 10A versions available 1206, 1812 and 2220 sizes Capacitance values up to 470nF Working voltages up to 500Vdc Tape and reeled for standard pick-and-place Miniature panel mount T Filters For use where panel space is at a premium Pitching as close as 4.6mm Capacitance up to 47nF and voltages up to 500Vdc Utilise 2 ferrite inductors and 1 discoidal capacitor per filter 3 Terminal EMI Chips & X2Y Balanced Line EMI Chips 3 terminal EMI chips in sizes from 0603 to 1806 High current (2A) versions available X2Y Balanced Line EMI Chips also available EMI Filter Design Kits Comprehensive kit containing 45 product types 22pF to 470nF, 300mA to 10A and up to 500Vdc rated FlexiCap Capacitors with TM Flexible Terminations The original polymer termination capacitor Reduces mechanical cracking Withstands almost twice the amount of board bend For aerospace, automotive and other applications 3 terminal EMI chips in 0805 and 1206 sizes High current, 3 terminal EMI chips in 0805, 1206 and 1806 sizes X2Y balanced line EMI chips in 0805, 1206, 1410 and 1812 sizes 1A, 5A and 10A Surface Mount pi-filters Page 31

34 Syfer Feature Product High Performance Capacitors Multilayer ceramic chip capacitors are renowned for their reliability but can be vulnerable to cracks when affected by PCB flexing. The resulting damage may not manifest itself immediately, but may ultimately result in field failure. Syfer Technology has introduced a polymer termination to its range of Multilayer Capacitors to permit greater degrees of board bending without damage to capacitors. Cracking problems? The multilayer ceramic chip capacitor is the capacitor of choice for surface mount applications and is one of the most reliable components for surface mount applications. However, it can fail due to fracture as a result of PCB bending. Over time, moisture penetration into the crack can cause a reduction in insulation resistance and eventual dielectric breakdown leading to capacitor failure in service. The bending may be caused by a number of factors, including the insertion of connectors or other components, poor storage, automatic testing or during depanelisation. Stress can also be exerted due to differential expansion when the board is temperature cycled. Land designs and the position of the capacitor on the board are also factors that the user needs to take into account. Stress fractures may not always be evident during the board assembly process. Sometimes it may be the end customer who finds out - when the equipment fails! FlexiCap TM the solution FlexiCap TM has been developed as a result of listening to customers experiences of stress damage to MLCCs from many manufacturers, often caused by variations in the customers production processes. Our answer is a proprietary flexible epoxy polymer termination material, that is applied to the device under the usual nickel barrier finish. FlexiCap will TM accommodate a greater degree of board bending than conventional capacitors and hence reduce the incidence of cracking. The benefit to the user is to facilitate a wider process window, giving a greater safety margin and substantially reducing the typical root causes of mechanical stress cracking. FlexiCap may be soldered using conventional wave or reflow TM solder techniques and needs no adjustment to equipment or current processes. Extensive reliability testing has confirmed that the polymer has no negative effect on electrical or environmental performance and electrical parameters indistinguishable from conventional parts. Features Benefits A silver-loaded epoxy polymer termination Standard tin finish over nickel barrier Flexible, to reduce the stress between the PCB and the ceramic capacitor Electrical parameters indistinguishable from conventional parts Extensive reliability testing has confirmed that the polymer has no negative effect on electrical environmental performance Reduced cracking Board can bend almost twice as far Better production yields resulting in cost reductions No change to existing assembly process Possibility to design-in larger chip sizes Facilitates a wider process window FlexiCap TM available for all standard X7R capacitors Applications Telecoms Power supplies Automotive Aerospace and many more Page 32

35 TDK TDK s greatest strength lies in the fact that it has established its own core technologies. TDK s core technologies are materials technology, process technology, and evaluation and simulation technology. Materials technology can be termed the starting point for everything that TDK does. The various technologies derived from the company s development of ferrite have yielded a rich array of products that meet the demand for smaller, thinner, more lightweight electronic devices. TDK s process technology is used to process these materials, and to maximise their performance by controlling their characteristics at the nano level. The result is a wide array of capacitors, inductors, circuit protection products, power products, and sensors and actuators. High Capacitance BME-MLCC Capacitance ranges from 1000pF to 100µF Available in 1608, 2012, 3216, 3225 metric case sizes Excellent frequency characteristics, ESL, and ESR Available from 6.3VDC to 50VDC at various temperature ranges Applications: computers, communication equipment, cell phones, gaming equipment, and LCD panels Clamp Filters (ZCAT) Unique case for ease of installations - no post molding required Built in strain relief prevents slippage on cable Ferrite core provides excellent absorption of Hi-frequency EMC Large core size prevents saturation during large signal surges Applications: computers, monitors, disk drives, telephones, A / V equipment, games, musical instruments Hi-Frequency Multilayer Ceramic Inductors (MLG) Inductance values from 1 to 390nH Available in 0603, 1005, and 1608 metric case sizes Advanced monolithic multilayer structure High Q characteristic Suitable for high frequency applications Communications equipment, cellular, networking Signal Line Wound Inductors (NLV) Metal terminals for excellent connection reliability Exterior package of high heat resistant thermoplastic resin NLV25 Series available in 0.01µH to 100µH NLV32 Series available in 0.01µH to 470µH Applications: A / V equipment, VCRs, TVs, cameras, communication equipment, mobile base stations, xdsl Power Line Wound Inductors (SLF) Low DC resistance and high current capacity Magnetically shielded for low noise within hi-density applications Flat bottom for ease of manufacturing and increased reliability Applications: computers, disk drives, networking equipment, DC-DC converters, communications, cellular, industrial controls, and automation Multilayer Chip Varistors (AVR) Superior ESD suppression performance Available in 0603, 1005, 1608, and 2012 metric case sizes Less than half the board space of Zener diodes Higher breakdown voltage than Zener diodes Select case sizes with capacitance as low as 1.1pF Protection for USB1.1/2.0, IEEE1394, HDMI, CANBUS Applications: computers, industrial measuring and testing equipment Common-mode Filters for Power Line (ACM) Common-mode impedance surpasses 300 to 1000Watt 100MHz. Noise is greatly suppressed. Capable of handling the highest current (up to 10A) Compact and light-weight choke coil. Contains no lead and also supports lead-free soldering Applications: radiation noise control for DC power lines; for portable applications, ISDN, LAN, CD / DVD-Rom, LCD panel, etc Common-mode Filters for Signal Line (ACM) Size variation: 4 types of case sizes are available from 11.0x9.4mm to 2.5x2.0mm Multi lines: 3 lines are prepared to correspond to the various application It can suppress the common-mode EMI without waveform distortion Applications: for portable applications, ISDN, LAN, CD / DVD-Rom, LCD panel, etc.; also suited for differential signal lines, such as USB and IEEE 1394 interface Common-mode Filters (SMD) for CAN-BUS (ZJYS Series, ZJYS51, ZJYS81 Types) Can reduce both common-mode noise and differential-mode noise Operating temperature range covers from -40 C to +125 C Contains no lead and also supports lead-free soldering Applications: radiation noise control for DC power lines, interface lines, CAN-BUS system Page 33

36 TDK Feature Product TDK MMZ Series SMD Ferrite Beads As IC clock speeds increase, there is a greater tendency for high frequency noise to occur, and noise countermeasures become more difficult to implement. In addition, the enhanced functions and high degree of integration of electronic components has exacerbated the noise problem. As an expert on noise countermeasures, TDK offers total EMC solutions and has won considerable praise in the industry. TDK s MMZ ferrite beads are electromagnetic compatibility (EMC) solutions that are designed for use on signal lines and in power supply & general electronic circuits. To address a wide array of applications, the MMZ series is available in five standard metric case sizes 0402, 0603, 1005, 1608, and The beads come in four different materials to address a wide range of impedance levels from 40MHz up to the GHz range. MMZ Beads are magnetically shielded to reduce crosstalk and allow for high density placement. The low DC Resistance structure of the electrode helps to reduce power consumption. The MMZ Series is available on tape and reel for use by automatic assembly equipment. The beads are non-polarised for ease of placement and suitable for reflow soldering methods. The MMZ Series contains no lead and is completely RoHS compatible. Features & Benefits Applications Standard metric case sizes: 0402, 0603, 1005, 1608, & 2012 Magnetically shielded to eliminate crosstalk EMI Suppression in the GHz range Four material types to manage wide range of impedance AV equipment Desktop & notebook computers Telecom equipment Mobile communications Electronic toys & games Low DC resistance prevents power consumption Lead free and RoHS compatible Power supplies Appliances Automotive Industrial measuring & testing equipment Page 34

37 TT electronics With manufacturing locations in the UK, USA and China, TT companies BI Technologies, IRC and Welwyn Components specialise in the development of new products and processes across thick and thin film, metal oxide, wirewound, metal film and circuit interconnect technologies. TT electronics plc is a world leader in component technologies, providing both application-specific resistive and microelectronic hybrid technology solutions to the world's leading companies. Extensive approvals are held from major automotive, military and telecommunications companies worldwide including TS16949:2002, CECC, ISO9000 and BSEN ISO9001:2000. Precision / Ultra Precision Resistors Metal film 15ppm, 0.1% Ultra precision metal film with tolerances down to 5ppm, 0.01% Moulded ultra precision with rugged protection, 2ppm Custom matched sets Bulk metal film, 5ppm, low inductance low noise Specialist Chip Resistors Approved to CECC , 004 &008 Resistance up to 50GOhms and down to 3mOhms Rated up to 3W, Voltage to 3kV High reliability tantalum nitride film for maximum protection, also available in military versions Military screening available Fusible Resistors Wirewound, metal film, carbon film and nickel film Full fusing characteristics available High Voltage / High Value Resistors Precision high voltage up to 50GOhm, 100kV High resistance up to 150GOhm Ultra high resistance up to 100TOhm Planar / planar divider types available with full custom design service Resistor Networks Silicon networks in QSOP Ceramic or silicon networks in SOIC High frequency networks T filter networks RC networks to IEEE1284 and line termination networks Precision networks to 0.1% tolerance Wirewound Resistors Vitreous enamel to CECC Cement coated: low cost and flameproof Aluminium housed to CECC Low Ohmic down to 5mOhms Moulded failsafe Open air low Ohmic, high current Tubular: vitreous and cement versions Pulse Chip Resistors High pulse capability for telecomms & power supply applications Field proven with millions of units in use Standard & Custom Chip Sizes (0805 to 2512) Thick film technology putting protection where its needed Current Sense High precision, low value axial & chip resistive technologies High power, 2 and 4 terminal current shunts Custom design service Open air, wire bondable, thick film precision & metal glaze (up to 2W) versions TCRs to ± 20 ppm / C Power Resistance 0.01R to 100M Rated up to 7kW Extreme operating temperature to +155 C Ultra low profile dynamic braking resistors Popular TO style packages Trimming Potentiometers Single turn Multi turn Surface mount Through hole Sealed Page 35

38 TT electronics - BI Technologies Feature Product SMP Series Surface Mount Power Resistor TT electronics BI Technologies has developed a Surface Mount Power Resistor with the highest power rating currently available. The SMP series is unique in its ability to offer designers of high power applications a resistor with a power capability of up to 10W. Designed for use in high power applications in confined spaces, the SMP series boasts a small footprint and moulded SOIC package that offers superior thermal management. The power resistor boasts extremely low thermal resistances in each axis to achieve maximum heat dissipation. By conducting heat from the resistive element through low thermal impedance metallic pathways to the package surfaces, the board efficiently channels heat away from the resistor to the ambient. This allows designers to create a product that can operate at higher output power levels, short term overloads & pulse durabilities without the normal thermal problems. Features & Benefits Applications Tolerances of +/-1% and +/-5% Operating temperature range of -55 C to 155 C Resistance range up to 10k Excellent heat dissipation qualities Enhanced power handling capabilities Increased protection from the threat of common overheating problems High frequency emitter resistors in switching power supplies High precision CRT colour video amplifiers High frequency snubber and pulse handling circuits Pulse generator load resistors In-rush current protection Bleeder resistors Page 36

39 TT electronics - IRC Feature Products Surface Mount Open Air Resistor TT electronics IRC has developed a wider version of their open air current sense resistor with a higher power rating than conventional metal element resistive devices to provide automotive design engineers with a power current sense surface mount resistor with enhanced thermal characteristics. Designated the OARS-XP Series, the resistor features a wider metal alloy resistive element that offers exceptional TCR ratings and superior thermal compliance. High Temperature Chip Resistors TT electronics IRC provides design engineers with a resistor suitable for extremely high operating temperatures, a series of tantalum nitride chip resistors rated for operation at 200 C. Designated the PFC-HT Series, the chip resistors utilise IRC's proprietary TaNFilm self-passivating resistive element technology, and feature a wrapround non-leaching termination style, with either gold-plated or 100% tin (lead free) versions designed to enable the devices to operate at elevated temperatures. Features & Benefits Features & Benefits Resistance value 2mΩ to 50mΩ Standard tolerances of ±1% and ±5% Inductance values less than 10 nanohenries Operating temperature from -40 C to +125 C Available in industry standard 0603, 0805 and 1206 chip sizes Voltage and power ratings of 33.3V / 62.5mW, 50V / 100mW and 100V / 125mW Resistance range from 10Ohm to 85KOhm Tolerances to ±1% Absolute TCRs from ±25ppm/ C Operating temperature range from -55 C to +200 C Page 37

40 TT electronics - Welwyn Feature Product ULR Series Lowest Ohmic Value Resistor Minimises Power Consumption The latest offering from TT electronics Welwyn Components, in response to demand for more energy efficient products, is the ULR Series, its lowest ohmic value resistor to minimise power consumption. Designed for current sensing in power electronic systems, resistors in the ULR series are available in 1W to 3W power ratings, with a wide ohmic range starting from as low as 500 microhms, allowing for measurement of currents up to approximately 75A. Products in the economical, low-inductance ULR series are surface mounted to maximise board space, making them well-suited to the industry trend for smaller products and are ideal for power supplies, DC-DC converters and miniature electric motor control devices. The newly launched series boasts high overload and pulse performance due to its bulk metal construction, making it an ideal choice for power supply applications with high inrush currents and motor drive applications with high momentary fault currents. The ULR is ultra low profile with most values below 1mm high, its compact 2512 footprint make it ideal for high-density designs. The ULR series construction is non-moulded in two variants distinguished by colour. The black type is a simple flat chip shape suitable for wave as well as IR reflow, the higher rated green type resistors also feature a PCB clearance gap to maximise thermal performance. The low ohmic values of the series permits low powers loss in high efficiency PSU design, making the ULR series an energy efficient choice. Featuring an ambient temperature range of -55 C to 170 C, the series is suitable for extreme operating environments such as industrial or automotive use. In addition it boasts a low temperature coefficient of 50ppm/ C, essential for those involved in constructing devices and circuits for the detection of currents. Features & Benefits Applications Ohmic values as low as 500 microhms High precision current measurement - tolerances of 1% and a temperature coefficient of 50ppm/ C High overload and pulse performance Ultra low profile Compact footprint Industrial (e.g. battery cell, process control) Automotive (e.g. motor control, lamp monitor) Power supply (e.g. output protection, DC-DC converter) Consumer (e.g. battery protection) Page 38

41 Tyco Electronics The range of precision resistors meets the requirement for economically priced components for both industrial and military applications. Tolerances down to 0.01% and TCRs as low as 5ppm, the range from Tyco Electronics delivers the Complete Precision Portfolio. Noise suppression and protection inductor chips from Tyco Electronics can help protect circuits in a variety of ways. The range offers solutions for high power and high speed applications. Tyco Electronics product portfolio now includes a comprehensive range of passive components. Specific areas of focus are in Precision Resistors, High Frequency Inductors and Carbon Trimmers. For all trimming solutions, Tyco Electronics is the ideal design partner where your circuit requires calibration or precision setting. Tyco Electronics high power and high voltage resistors can offer up to 1000W with voltage proof to 50kV. High power and pulse resistors are capable of withstanding pulses up to 25,000 Watts for applications such as regenerative braking and power supplies, these are available in a wide variety of package styles with customisation our speciality. Precision / Ultra Precision Resistors RN73 series Temperature coefficient of resistance (TCR) values down to 5ppm/ C Resistor tolerances to 0.01% RN (10ppm 0.1%) values from 10R to 270K RN (10ppm 0.1%) values from 4R7 to 332K in the E96 grid RN (10ppm 0.1%) values from 4R7 to 500K in the E96 grid RN value range can go from 4R7 to 1M0 and that we can offer 2010 and 2512 case size as well The RN73 series in case sizes 0603, 0805 and 1206 are also available with Increased Power ratings Wide range of pack quantities (250 piece cut strip, 1000 piece reels, 5000 piece reels, piece reels) Thin Film resistors with higher tolerances and TCRs are available as the CPF Series High Frequency Chip Inductor 3650 series Wide range of inductance values from 1.0nH up to 4.7mH Demanding high frequency applications Ideal choice for filtering and signal conditioning in cellular phones, global positioning systems (GPS), digital TV tuners, cordless telephones, W-LAN and Bluetooth applications Four package sizes: 0402, 0603, 0805, 1008 Designed for automatic placement Wire wound construction and standard tolerances of 2, 5 and 10% High self resonant frequency realises a high Q factor and stable inductance at high frequency Smooth casings of the devices facilitate accurate placement A low-dc-resistance design of the devices provides low loss, high output and low power consumption Operating temperature range from -40 up to +125 C RoHS compliant Available in quantities of either 1000 or 5000 piece reels Laboratory design kits are available Carbon Economy Trimmers Type CB15 series & Type CB10 series Low Cost Robust enclosed construction Spindle adjust versions Flame retardant Arrow position indicator Top, bottom and side adjust styles Stable in high humidity Edgewheel operation style Page 39

42 Tyco Electronics Feature Product Customisation & Development Programme As a leading manufacturer of resistive products, Tyco Electronics serves a wide range of sectors with both standard and custom-designed solutions. Core markets include industrial machinery, transportation, electrical appliances and commercial. Manufacturing processes include thick film, thin film, wire-wound and foil technology. These core processes can be adapted to achieve solutions specific to a customers design requirements. Our capability includes bespoke product developments and product modifications. The experienced design team works closely with our customers' engineering personnel to design advanced products meeting their exact requirements. We also offer 3D visualisation of the product so our customers engineers have an understanding of what the product will look like from the start of the project. The customisation and development programme includes in-house product testing in our own R & D laboratory. Tests can be designed in conjunction with customer specifications to include cyclic rated power and overload testing, adiabatic (single shot and frequency) testing, environmental, mechanical and repetitive pulse testing. Qualification testing is carried out to a proven procedure and the product development stages are well documented and approved by a design approval team. Features & Benefits Applications Bespoke Solution Can be treated as a component not an assembly Engineered from a specification to completion We turn your specification into a drop-in solution Complete Flexibility A wide range of resistors, heatsinks, terminal posts, fixings, wiring harnesses and connectors to suit every application Convection or Water Cooling Designed to meet your performance and cost requirements Reduce Cabinet Temperature for End-User Increases component life and system reliability Rail Marine Power Transmission and Distribution Electrical Machinery Crowbar Filter Braking Capacitor Charging and Discharging Page 40

43 Tyco Electronics / Raychem Circuit Protection Products Raychem Circuit Protection products are a part of your everyday life... From your cell phone battery to your car s steering they help to make your world safer and your electronics more reliable. The company develops, manufactures, and markets a complete line of overcurrent, integrated, and overvoltage circuit protection products. All products are available in RoHS compliant. PolySwitch TM Devices Surface Mount, Radial Leaded, Axial Strap Hold currents ranging from 0.05 to 15 Amps Voltage ratings from 6V to 240V Range includes, Radial Leaded devices, Surface Mount devices SMD, minismd TM, microsmd TM and nanosmd TM families (1206, 1210, 1812, 2018, 2920 and 3245 sizes), Protection against short duration, high voltage faults (250V - 600V) ROV Metal Oxide Varistors Various diameter sizes: 5mm, 7mm, 10mm, 14mm, 20mm Broad varistor voltage range: 18V V Various surge capabilities: standard, high surge, extra high surge High current handling and energy absorption capability Fast response time Low leakage current Various lead types: straight, kinked, other special lead types Fast Acting Fuses Highest hold current / smallest footprint Monolithic, Multilayer Surface Mount package -55 C to 125 C operating temperature SiBar TM Thyristors Bidirectional crowbar transient voltage protection High off-state impedance Low on-state voltage High surge capability Short-circuit failure mode Surface Mount technology Slow Blow Fuses High current ratings / small footprint Monolithic, Multilayer Surface Mount package -55 C to 125 C operating temperature Telecom Fuses High density placement in multi-port systems Telcordia GR-1089, TIA-968A and UL60950 Gas Discharge Tubes Crowbar device with low arc-voltage Low capacitance and insertion loss High accuracy sparkover voltages for high precision designs Wide range of voltages and form factors Many devices tested per ITU K.12 recommendations Optional fail-short mechanism Various lead configurations Non radioactive materials ESD Protection Devices Thick film technology Low capacitance (0.25 pf typical) Low leakage current Low trigger voltage Low clamping voltage Fast response time (< 1ns) Capable of withstanding numerous ESD strikes Compatible with standard reflow installation procedures Bi-directional protection PolyZen TM Micro-Assemblies Overvoltage transient suppression Stable VZ vs fault current Time delayed, overvoltage trip Time delayed, reverse bias trip Power handling on the order of 100 watt Integrated device construction 2Pro TM Devices Single overcurrent, overvoltage and ESD protection device Resettable overcurrent protection UL 497A listed protector (#E258475) Page 41

44 Tyco Electronics / Raychem Circuit Protection Products Feature Product PolyZen Micro Assembly Tyco Electronics has introduced its Raychem Circuit Protection PolyZen polymer enhanced, precision Zener diode micro-assembly. Designed to meet the growing need for overcurrent and overvoltage protection on portable equipment that utilises barrel jacks for DC power input, the PolyZen device helps protect sensitive electronics from damage caused by inductive voltage spikes, voltage transients, incorrect power supplies and reverse bias. The new PolyZen device helps provide coordinated protection with a component that protects like a Zener diode, but is capable of withstanding very high power fault conditions. The PolyZen microassembly incorporates a stable Zener diode for precise voltage clamping and a resistively non-linear, polymer positive temperature coefficient (PPTC) layer that responds to either diode heating or overcurrent events by transitioning from a low to high resistance state. The RoHS-compliant device offers power handling on an order of 100 watts in a 4mm package and helps provide DC power port protection for portable electronics and systems using barrel jacks for power input, as well as internal overvoltage protection and transient suppression. PolyZen devices help provide resettable protection against multi-watt fault events and requires only 0.7W power dissipation. In the event of sustained high power conditions, the PPTC element of the device trips to limit current and generate voltage drop. This functionality helps protect both the Zener and the follow-on electronics, effectively increasing the diode's power handling capacity. Features & Benefits Applications Helps shield downstream electronics from overvoltage and reverse bias Analog nature of trip events minimise upstream inductive spikes Helps reduce design costs with single component placement and minimal heat sinking requirements Overvoltage transient suppression Stable VZ vs fault current Time delayed, overvoltage trip Time delayed, reverse bias trip Power handling on the order of 100 watt Integrated device construction RoHS compliant Hard disk drive protection Portable electronics Computer subsystems Automotive electronics USB port protection Internal overvoltage and transient suppression DC power port protection for systems using Barrel Jacks for power input Page 42

45 Vishay Vishay Intertechnology, Inc., is one of the world s largest manufacturers of discrete semiconductors and passive electronic components. Vishay has grown through R&D and acquisitions to become a leader in the global electronics industry that sells into all geographic markets and all relevant market segments. Resistors Surface Mount and leaded packages Wirewound, Power Metal Strip, Thin Film, Thick Film, Metal Film, carbon, MELF and mini- MELF Film technologies MIL, CECC, and EIA approved styles Broadest Surface Mount product offering Film Capacitors Metallised film: MKT, MKP, and MKN Excellent electrical parameters Low losses, high current, not polarised Self-healing properties Customised designs Magnetics Surface Mount and leaded transformers Surface Mount and leaded power inductors and RF inductors High-frequency chip inductors Chip impedance beads RFI Capacitors Metallised film MKP and MKT 0.001µF up to 10µF Class X and Y, small physical dimensions Approvals: IEC384-14/2, EN UL, CSA, CQC Bulk Metal Foil Resistors TCR: ± 0.05 ppm/ C (0 C to 60 C) PCR R due to self heating : 5 ppm at rated power Tolerance: from 0.001% Electrostatic discharge above 25,000 V Not limited to standard values (e.g. 1K12345) Samples for prototypes within 48 hours (foil@vishay.com) Molded Tantalum Chip Capacitors T83 molded chip capacitor 298D lead-frameless molded chip capacitor 0603 and 0805 case sizes Face-down terminations, 100% tin Signal processing and power management in mobile phones, digital cameras and MP3 devices Multi-layer Ceramic Capacitors Large portfolio of EIA industry-standard sizes Wide capacitance ranges NP0, X5R, X7R, X8R, and Y5V dielectrics High-voltage and specialty MLCCs Low-ESR and Hi-Q MLCCs MIL and Hi-Rel products Chip arrays Miniature 0201 sizes Single-Layer Ceramic Disc Capacitors Class 1 (SL, C0G, N750) and Class 2 (X5F, X7R, Y5P, Y5R, Z5U, Y5U) dielectrics Broad high-voltage and low-voltage ranges General-purpose, low-dissipation, and narrow-tolerance series EMI RFI Y1 and Y2 series comply with IEC nd edition ENEC, UL, and CSA approved Page 43

46 Vishay Molded Surface Mount Resistors Package sizes from 2012 to 6927 Resistance range: 0.1Ω to 100kΩ High temperature performance: up to +275 C Tight tolerances: down to ± 0.5% Low temperature coefficient: down to ± 20 ppm/ C Excellent overload capability Power Metal Strip Resistors Range of package sizes from 0603 to 5931 Resistance range: Ω to 1Ω Temperature performance: up to +275 C Tolerances: down to ± 0.5% Low temperature coefficient: down to ± 30 ppm/ C Excellent overload capability Leaded Tantalum Capacitors SuperTan Extended-Range (STE) Wet Tantalum Capacitors Highest capacitance per unit volume available Capacitance ranges from 750µF to 10,000µF Hermetic seal enables the STE to withstand high stress and hazardous environments Avionics, aerospace, smart munitions, petroleum down-hole exploration and data logging MPM / MP / MPDA Precision Thin Film Matched Pair Dividers Small size: SOT-23, SC70, SOT-143 packages Tight resistance ratio tolerances: ± 0.01% on equal values Low TCR tracking: ± 2.0 ppm Excellent long-term stability: ± 0.03% R ratio, 2000 hours at 70 C Available lead (Pb) and lead (Pb)-free, e3, solder (RoHS-compliant) Resistor Arrays Wide range of package sizes: 04, 06, 08 and 12 Wide resistance range: 1Ω to 10MΩ Square corner and scalloped corner; convex and concave terminations Reduce board space, weight, and component count Eliminate 1 to 14 placements with a single chip Conformal-Coated Tantalum Chip Capacitors Hi-Rel COTS chip capacitors T95 conformal-coated chip capacitor Customer-definable termination plating, Weibull grading, surge-current screening and ESR level Designed for safety-critical avionics and military applications Aluminium Electrolytic Capacitors Radial, Axial, SMD, large can, energy storage, and solid aluminum SMD versions: industrial, standard, high-temperature, low-esr Large Can, Snap In, Printed Wiring Board, Screw Terminal versions Page 44

47 Vishay Feature Product TR3 Molded Tantalum Chip Capacitor Very Low ESR, High Ripple- Current Handling Vishay s TR3 series molded tantalum chip capacitors provide high efficiency with ESR values down to 0.035Ω and maximum ripple current values up to 2.07A (100 khz, 470 µf). In addition to the TR3 s very low ESR values and high ripplecurrent handling capabilities, the new tantalum capacitors feature a proven solid tantalum construction that ensures long-term reliability. Features & Benefits Applications EIS 535BAAE and IEC QC / US0001 compliant A, B, C, D, E cases available with 90 / 10 Sn / Pb and 100% Sn terminations Compatible with high volume pick-and-place assembly equipment Cases B, C, D, E are 100% surge-current tested Capacitance ranges from 0.47µF to 680µF Voltage ranges from 4 WVDC to 50 WVDC Microprocessor bulk storage Telecom Automotive Computers: Line cards Avionics end systems Medical instrumentation Page 45

48 Vishay Feature Product Feature Product WSLS2512 Surface-Mount Power Metal Strip Resistor Low Resistance Change of 0.5% in Low Resistance Values of 0.01Ω to 0.1Ω Vishay's WSLS2512 surface-mount Power Metal Strip resistor offers improved resistance stability during operation to enable precise current monitoring in high-temperature (+125 C), tightened-stability applications. Features & Benefits Low resistance values of 0.01Ω to 0.1Ω Low inductance values of 0.5nH to 2.0nH Tight tolerance down to ±0.5% Low TCR values down to ±30 ppm/ C Applications Automotive electronic controls including: Engine controls Transmission controls Pollution controls testing is carried out to a proven procedure and the product development stages are well documented and approved by a design approval team IHLP Low-Profile, High-Current Inductors in New 1616 Footprint Low Profiles of 1.2mm and 2.0mm With Maximum Frequency Ranges of 1.0MHz and 5.0MHz Vishay's IHLP-1616AB-11 and IHLP-1616BZ-11 inductors offer a maximum frequency of 1.0 MHz, while the IHLP-1616AB-01 and IHLP-1616BZ-01 feature a maximum frequency of 5.0 MHz. They offer the lowest DCR/µH for their respective package sizes. Features & Benefits Inductance range of 0.047µH to 4.7µH Handle high transient current spikes without hard saturation Construction is RoHS-compliant and 100% lead (Pb)-free High resistance to thermal shock, moisture, mechanical shock, and vibration Applications VRM and DC-to-DC applications including point-of-load converters, distributed power systems, and voltage regulation for FPGAs Medium- to high-current noise filtering and DC-to-DC boost converters for white LED driver circuits Page 46

49 Yageo Yageo is a major global player in surface mounted ceramics components for the electronic industry and a company with a worldwide network of sales offices, distribution centres and factories. The company has a long history in ceramic technology and in the development of innovative ceramic-based solutions for today's electronic equipment industries - mainly in the telecommunication, EDP and digital consumer areas. Yageo headquarters is located in Taipei, Taiwan, with European and North America Sales and Logistic facilities. Yageo is well established as a supplier of multiplayer ceramic capacitors (MLCCs) and Surface Mount Resistors (R-Chips) manufactured in state-of-the-art production facilities around the world. Their production facility in Kaohsiung, Taiwan, for example, is widely regarded as a major centre in Asia Pacific for innovative manufacturing and its Suzhou, China, facility is currently the world largest factory for R-Chips. Yageo has a highly developed commitment to environmental protection reflected in technologies and industrial best practices and in aggressive targets for energy and water savings and waste and emission reduction. The company also pioneered, and still leads, the development of water-based technologies and leads in the development of lead-free dielectrics for MLCC ranges and the replacement of palladium with less expensive base-metal electrodes (BME) in MLCC ranges. Besides developments in Passives like MLCC and R-Chips Yageo is expanding its product portfolio with High Frequency Passive solutions capable of covering the 400 MHz to 8 GHz frequency bands. In close cooperation with Customers HF components like Antenna s, Baluns and Filters are being developed and produced for Bluetooth, WiMax, WWAN, DVB-T, GPS, 3G Wireless applications. Key for these HF components is the integration of Simulation and Design, Materials and Manufacturing. Resistor Chips (R-chips) Surface Mount packages down to 0201 Thick and Thin Film and special products including power chip high ohmic, low ohmic, high voltage, surge and trimmable chip resistors Broadest Surface Mount product offering Thick-film arrays and networks Leaded Resistors Wide product range of carbon film, metal film and metal oxide (conventional and miniature styles) Flameproof High quality Wirewound Components Ceramic: coated and moulded versions High power series up to 40V Quick tape terminals Axial, vertical and Radial Leaded Circuit breaker and failsafe versions (Wide range of styles including specials) High Frequency Products Wide range of ceramic antennas (433 MHz GHz) Based on low temperature cofired ceramic (LTCC) technology For wireless LAN, DECT, GPS, Bluetooth, dual band, triple band and TDMA applications High frequency filters, baluns and attenuators Customised ceramic antennas on request Chip Inductors & Ferrite bead chips Wide range of chip sizes down to 0402 High and low frequency application High and low current EMI Suppressor Power Inductors For EMI / RFI filtering High performance High current up to 20A Low cost SMT toroid and SMT power inductors Electrolytic Capacitors Snap In, Radial, SMD Super miniature low profile General purpose Low impedance and low ESR Low leakage current Non-polar and very long life: up to 10,000 hours Multilayer Ceramic Capacitors (MLCC) Wide capacitance range (0.47pF - 22µF) NP0, X7R and Y5V dielectrics High-voltage, arrays, ultra-small 0201 MLCCs, low-inductance including unique X2Y filtering, microwave, narrow tolerance, feed-through capacitors and arrays BME technology Suitable for tantalum replacement Innovative Service Around the Globe Page 47

50 Yageo Feature Product LTCC Surface Mount Ceramic Filter, Balun Diplexer, Combo Yageo has wide portfolio Surface Mount Ceramic Multilayer Filter / Balun / Balanced Filter (Combo) for all kind of HF applications. Applications HF applications in 2.45 GHz, 3.5 GHz and 5 GHz range 2.45 GHz / 5 GHz dual frequency Features & Benefits Good in combination with Yageo HF antennas Attractive cost solutions World Class volume manufacturing 2.4/5 GHz module with Diplexer (Low Pass Band / High Pass filter) Yageo offers you complete HF solutions, with a wide range of ceramic, metal and PCB antennas with full measuring support. More details (complete product overview, datasheets, order code overview (12NC / CTC) and more detailed application information) are available on the Yageo microsite at /go/yageo Page 48

51 CORPORATE HEADQUARTERS TTI Inc Northeast Parkway Fort Worth Texas U.S.A. T: F: EUROPEAN HEADQUARTERS TTI, Inc. Ganghoferstr Maisach-Gernlinden Germany T: +49 (0) F: +49 (0) E: sales@de.ttiinc.com TTI Sales AUSTRIA Vienna T: +43 (0) F: +43 (0) E: sales.vienna@at.ttiinc.com BENELUX Eindhoven T: +31 (0) F: +31 (0) E: sales.benelux@nl.ttiinc.com CZECH REPUBLIC T: F: E: sales.brno@cz.ttiinc.com DENMARK Copenhagen T: +45 (0) F: +45 (0) E: sales.copenhagen@dk.ttiinc.com FINLAND T: F: E: sales.finland@fi.ttiinc.com FRANCE Brive T: +33 (0) F: +33 (0) E: sales.toulouse@fr.ttiinc.com (Covering North Africa) GERMANY Munich T: +49 (0) F: +49 (0) E: sales.munich@de.ttiinc.com Hanover T: +49 (0) F: +49 (0) E: sales.hannover@de.ttiinc.com Pforzheim T: +49 (0) F: +49 (0) E: sales.stuttgart@de.ttiinc.com Dortmund T: +49 (0) F: +49 (0) E: sales.dortmund@de.ttiinc.com HUNGARY Budapest T: F: E: sales.budapest@hu.ttiinc.com IRELAND T: +353 (0) F: +353 (0) E: sales.ireland@ie.ttiinc.com ISRAEL T: F: E: sales.israel@il.ttiinc.com ITALY Milan T: F: E: sales.milan@it.ttiinc.com Padova T: F: Bologna T: F: NORWAY T: +47 (0) F: +47 (0) E: sales.norway@no.ttiinc.com POLAND Kwidzyn T: +48 (0) F: +48 (0) E: sales.poland@pl.ttiinc.com ROMANIA Cluj Napoca T: +40 (0) F: +40 (0) E: sales.romania@ro.ttiinc.com SLOVAKIA Bratislava T: +421 (0) F: +421 (0) E: sales.bratislava@sk.ttiinc.com SOUTH AFRICA T: +27 (0) F: +27 (0) E: sales.southafrica@za.ttiinc.com SPAIN / PORTUGAL Barcelona T: +34 (0) F: +34 (0) E: sales.barcelona@es.ttiinc.com Matiena-Abadiano T: +34 (0) F: +34 (0) E: atxarte.salterain@es.ttiinc.com SWEDEN Stockholm T: +46 (0) F: +46 (0) E: sales.stockholm@se.ttiinc.com Gothenburg T: +46 (0) F: +46 (0) E: sales.gothenburg@se.ttiinc.com SWITZERLAND Baar T: +41 (0) F: +41 (0) E: sales.swiss@ch.ttiinc.com TURKEY T: +90 (0) F: +90 (0) E: sales.istanbul@tr.ttiinc.com UNITED KINGDOM High Wycombe T: +44 (0) F: +44 (0) E: sales.london@uk.ttiinc.com Essex Military Aerospace Office T: +44 (0) F: +44 (0) E: mil-aero@uk.ttiinc.com Scotland T: +44 (0) F: +44 (0) E: sales.london@uk.ttiinc.com If you haven t tried TTI, then please call us to find out what a true specialist can offer. By D4 See: PB: 1007V4 The World's Leading Passive and Connector Specialist