MEJ1 Series 5.2kVDC Isolated 1W DC/DC Converters

Size: px

Start display at page:

Download "MEJ1 Series 5.2kVDC Isolated 1W DC/DC Converters"

Marion Douglas
6 years ago
Views:

Efficiency (Min) Efficiency (Typ) MTTF 1 FEATURES Basic/supplementary isolation to UL 69 2 ANSI/AAMI ES661-1 Single and dual outputs UL 94V- package material SIP package style 5.

3V, 5V, 9V, 12V & 15V output Internal SMD construction Fully encapsulated with toroidal magnetics Pin compatible with the MEV, NMV, NMK, MEJ2, & NMJ series PRODUCT OVERVIEW The MEJ1 series are single

1 MEJ1 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Current Input Current (Typ) Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ) 3 Ripple & Noise (Max) 3 Efficiency (Min) Efficiency (Typ) MTTF 1 FEATURES Basic/supplementary isolation to UL 69 2 ANSI/AAMI ES661-1 Single and dual outputs UL 94V- package material SIP package style 5.2kVDC isolation Hi Pot Test 3.3V, 5V, 12V, 15V & 24V inputs 3.3V, 5V, 9V, 12V & 15V output Internal SMD construction Fully encapsulated with toroidal magnetics Pin compatible with the MEV, NMV, NMK, MEJ2, & NMJ series PRODUCT OVERVIEW The MEJ1 series are single and dual output DC/ DC converters in a 7 pin SIP package style offering an isolation and insulation upgrade path from the NMV & MEV1 series. The MEJ1 series has UL69 and ANSI/AAMI ES661-1 recognition, which makes it ideal for applications where safety and miniaturisation are of paramount importance. For full details go to Single Dual V V ma % mvp-p % khrs MEJ1S33SC MEJ1S35SC MEJ1S3SC MEJ1S5SC MEJ1S9SC MEJ1S512SC MEJ1S515SC MEJ1S123SC MEJ1S1SC MEJ1S129SC Contact Factory MEJ1S1212SC MEJ1S1215SC MEJ1S15SC MEJ1S19SC MEJ1S1512SC MEJ1S1515SC MEJ1S245SC MEJ1S249SC MEJ1S2412SC MEJ1S2415SC MEJ1D3SC 5 ±3.3 ± MEJ1D5SC 5 ±5 ± MEJ1D9SC 5 ±9 ± MEJ1D512SC 5 ±12 ± MEJ1D515SC 5 ±15 ± MEJ1D123SC 12 ±3.3 ± MEJ1D1SC 12 ±5 ± MEJ1D129SC 12 ±9 ± MEJ1D1212SC 12 ±12 ± MEJ1D1215SC 12 ±15 ± MEJ1D15SC 15 ±5 ± MEJ1D19SC 15 ±9 ± MEJ1D1512SC 15 ±12 ± MEJ1D1515SC 15 ±15 ± MEJ1D245SC 24 ±5 ± MEJ1D249SC 24 ±9 ± MEJ1D2412SC 24 ±12 ± MEJ1D2415SC 24 ±15 ± INPUT CHARACTERISTICS Continuous operation, 3V input types Continuous operation, 5V input types Voltage range Continuous operation, 12V input types V Continuous operation, 15V input types Continuous operation, 24V input types V input types 4 Input reflected ripple 5V input types 24 12V & 15V input types 12 ma 24V input types 8 1. Calculated using MIL-HDBK-217 FN2 calculation model with nominal input voltage at full load. 2. See safety approvals section for limitations of use. 3. See ripple & noise test method. All specifications typical at TA= C, nominal input voltage and rated output current unless otherwise specified. KDC_MEJ1_E1 Page 1 of 9

2 OUTPUT CHARACTERISTICS Rated Power 2 TA=-4ºC to 85ºC 1 W Voltage Set Point Accuracy See tolerance envelopes Line regulation High VIN to low VIN %/% ABSOLUTE MAXIMUM RATINGS Short-circuit protection 48 Hours Lead temperature 1mm from case for seconds 26 C Input voltage VIN, MEJ1x3xxSC 5V Input voltage VIN, MEJ1x5xxSC 7V Input voltage VIN, MEJ1x12xxSC 15V Input voltage VIN, MEJ1x15xxSC 18V Input voltage VIN, MEJ1x24xxSC 28V ISOLATION CHARACTERISTICS Production tested for 1 second 52 Isolation test voltage Qualifcation tested for 1 second 7 VDC Qualifcation tested for 1 minute 52 Resistance Viso= VDC 1 GΩ Isolation capacitance 3 pf GENERAL CHARACTERISTICS Switching frequency All types khz TEMPERATURE CHARACTERISTICS Specification All output types (see safety approval section for limitations) Storage Case Temperature above ambient Cooling MEJ1S1212SC, MEJ1S1512SC, MEJ1S2412SC, MEJ1D1215SC, MEJ1D1512SC, MEJ1D2412SC, MEJ1D2415SC, MEJ1S1215SC, MEJ1S19SC, MEJ1S249SC MEJ1D1SC, MEJ1D129SC, MEJ1D245SC, MEJ1D249SC, MEJ1S129SC, MEJ1S1515SC, MEJ1S2415SC, MEJ1D1212SC, MEJ1D19SC, MEJ1S515SC, MEJ1S245SC, MEJ1D512SC, MEJ1D515SC, MEJ1D1515SC, MEJ1S15SC, MEJ1D5SC, MEJ1D9SC, MEJ1D123SC, MEJ1D15SC, MEJ1S9SC, MEJ1S512SC, MEJ1S1SC MEJ1S5SC, MEJ1S123SC, MEJ1D3SC, MEJ1S33SC, MEJ1S35SC, MEJ1S3SC Free air convection C TEMPERATURE DERATING GRAPH Output Power (W) Safe Operating Area 4 Ambient Temperature (ºC) 85 KDC_MEJ1_E1 Page 2 of 9

3 TECHNICAL NOTES ISOLATION VOLTAGE Hi Pot Test, Flash Tested, Withstand Voltage, Proof Voltage, Dielectric Withstand Voltage & Isolation Test Voltage are all terms that relate to the same thing, a test voltage, applied for a specified time, across a component designed to provide electrical isolation, to verify the integrity of that isolation. Murata Power Solutions MEJ1 series of DC/DC converters are all % production tested at 5.2kVDC for 1 second and qualifcation tested at 7kVDC for 1 second, 5.2kVDC for 1minute. A question commonly asked is, What is the continuous voltage that can be applied across the part in normal operation? The MEJ1 series has been recognized by Underwiters Laboratory for various voltages, please see safety approval section below. REPEATED HIGH-VOLTAGE ISOLATION TESTING It is well known that repeated high-voltage isolation testing of a barrier component can actually degrade isolation capability, to a lesser or greater degree depending on materials, construction and environment. We therefore strongly advise against repeated high voltage isolation testing, but if it is absolutely required, that the voltage be reduced by 2% from specified test voltage. SAFETY APPROVAL ANSI/AAMI ES661-1 The MEJ1 series has been tested by Underwriters Laboratory (UL) to meet ANSI/AAMI ES661-1 medical safety standard providing the following MOOP (means of operator protection), in a maximum ambient temperature of 85 C and/or case temperature limit of 13 C (case temperature measured on the face opposite the pins): 1 MOOP based upon a working voltage of 2 Vrms max and 28 Vpk max., between Primary and Secondary and between Primary and its Enclosure. File Number E22895 applies. UL 69 The MEJ1 series has been recognized by Underwriters Laboratory (UL) to UL 69 for basic/supplementary insulation to a working voltage of 2Vrms in a maximum ambient temperature of 85 C and/or case temperature limit of 13 C (case temperature measured on the face opposite the pins). File number E1512 applies. FUSING The MEJ1 Series of converters are not internally fused so to meet the requirements of UL an anti-surge input line fuse should always be used with ratings as defined below. MEJ1x3xxSC 1A MEJ1x5xxSC 1A MEJ1x12xxSC ma MEJ1x15xxSC ma MEJ1x24xxSC 2mA All fuses should be UL recognized and rated to at least the maximum allowable DC input voltage. RoHS COMPLIANCE INFORMATION This series is compatible with RoHS soldering systems with a peak wave solder temperature of 26ºC for seconds. The pin termination finish on this product series is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. The series is backward compatible with Sn/Pb soldering systems. For further information, please visit KDC_MEJ1_E1 Page 3 of 9

4 APPLICATION NOTES Minimum load The minimum load to meet datasheet specification is % of the full rated load across the specified input voltage range. Lower than % minimum loading will result in an increase in output voltage, which may rise to typically double the specified output voltage if the output load falls to less than 5%. Capacitive loading and start up Typical start up times for this series, with a typical input voltage rise time of 2.2μs and output capacitance of μf, are shown in the table below. The product series will start into a capacitance of 47μF with an increased start time, however, the maximum recommended output capacitance is μf. Start-up time Start-up time μs μs MEJ1S33SC 9 MEJ1D3SC 7 MEJ1S35SC 2 MEJ1D5SC 16 MEJ1S3SC MEJ1D9SC 37 MEJ1S5SC 2 MEJ1D512SC 42 MEJ1S9SC 32 MEJ1D515SC 7 MEJ1S512SC 7 MEJ1D123SC 6 MEJ1S515SC MEJ1D1SC 12 MEJ1S123SC 6 MEJ1D129SC 36 MEJ1S1SC 12 MEJ1D1212SC 39 MEJ1S129SC 29 MEJ1D1215SC 6 MEJ1S1212SC 29 MEJ1D15SC 12 MEJ1S1215SC 39 MEJ1D19SC 32 MEJ1S15SC 1 MEJ1D1512SC 33 MEJ1S19SC 24 MEJ1D1515SC 48 MEJ1S1512SC 27 MEJ1D245SC 1 MEJ1S1515SC 38 MEJ1D249SC 2 MEJ1S245SC 17 MEJ1D2412SC 33 MEJ1S249SC 23 MEJ1D2415SC 64 MEJ1S2412SC 22 MEJ1S2415SC 36 Typical Start-Up Wave Form Ripple & Noise Characterisation Method Ripple and noise measurements are performed with the following test configuration. C1 1μF X7R m ultilayer ceramic capacitor, voltage rating to be a minimum of 3 times the output voltage of the DC/DC converter C2 μf tantalum capacitor, voltage rating to be a minimum of 1.5 times the output voltage of the DC/DC converter with an ESR of less than mω at khz C3 nf multilayer ceramic capacitor, general purpose R1 4Ω resistor, carbon film, ±1% tolerance R2 Ω BNC termination T1 3T of the coax cable through a ferrite toroid RLOAD Resistive load to the maximum power rating of the DC/DC converter. Connections should be made via twisted wires Measured values are multiplied by to obtain the specified values. Differential Mode Noise Test Schematic DC/DC Converter SUPPLY Input Output C1 C2 C3 R1 T1 R OSCILLOSCOPE Y INPUT R LOAD KDC_MEJ1_E1 Page 4 of 9

5 TOLERANCE ENVELOPES The voltage tolerance envelope shows typical load regulation characteristics for this product series. The tolerance envelope is the maximum output voltage variation due to changes in output loading. DUAL 123,1515, 2412, SINGLE 33, 35, 123 DUAL 129, 19, % +3% -1% % -7% -3% DUAL 515, SINGLE 1515, 2415 DUAL 1512, SINGLE 1212, 1512, % % % % -5% -4% DUAL 512, SINGLE 129, 19, DUAL 1212, 1215, 2415, SINGLE 9, 512, 1215, % -1% -1% -4% -4% KDC_MEJ1_E1 Page 5 of 9

6 TOLERANCE ENVELOPES SINGLE 1, 15, 245, 515 DUAL 1, 5, 15, % +5% +3% % -3% -2% DUAL 9, 3, SINGLE 3, 5 +6% -4% KDC_MEJ1_E1 Page 6 of 9

7 EFFICIENCY VS LOAD Single Output 3.3V Input 5V Input MEJ1S35SC MEJ1S33SC 3 MEJ1S3SC MEJ1S5SC MEJ1S9SC MEJ1S512SC MEJ1S515SC V Input 9 15V Input MEJ1S123SC MEJ1S1SC MEJ1S129SC MEJ1S1212SC MEJ1S1215SC 3 MEJ1S15SC MEJ1S19SC MEJ1S1512SC MEJ1S1515SC V Input MEJ1S245SC MEJ1S249SC MEJ1S2412SC MEJ1S2415SC KDC_MEJ1_E1 Page 7 of 9

8 EFFICIENCY VS LOAD Dual Output 5V Input 9 12V Input MEJ1D3SC MEJ1D5SC MEJ1D9SC MEJ1D512SC MEJ1D515SC 3 MEJ1D123SC MEJ1D1SC MEJ1D129SC MEJ1D1212SC MEJ1D1215SC V Input 9 24V Input MEJ1D15SC MEJ1D19SC MEJ1D1512SC MEJ1D1515SC 3 MEJ1D245SC MEJ1D249SC MEJ1D2412SC MEJ1D2415SC KDC_MEJ1_E1 Page 8 of 9

9 PACKAGE SPECIFICATIONS MECHANICAL DIMENSIONS [.498] MAX [.774] MAX.5 [.396] MAX MEJ1D3SC XYYWW.4 [.16] MIN PIN CONNECTIONS Single Output Pin Function 1 +Vin 2 -Vin 5 -Vout 7 +Vout 4.±. [.161±.2] * 7 Dual Output. [.2]± [.]. [.]±.5 Pin Function 1 +VIN 2 -VIN 5 -VOUT 6* OV 7 +VOUT [ ] [.6] [ ] * All dimensions in mm ±.mm (inches ±.1). All pins on a 2.54 (.1) pitch and within ±. (.1) of true position. * Pin not fitted on single output variants. Weight: 4.3g TUBE OUTLINE DIMENSIONS 6. (.236) 14.2 (.559) RECOMMENDED FOOTPRINT DETAILS x5 HOLES Ø [ Ø ] 5. (.197) 2.54 [.] 5.2 (.) 1. (.59).6±.15 (.24±.6) Unless otherwise stated all dimensions in mm ±.5mm (inches ±.2). Tube length : 2.669±.79 (5mm±2mm). Tube Quantity : 2.54 [.] * Hole not required for single output variants. All dimensions in mm ±.mm (inches ±.1). Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA U.S.A. ISO 91 and 141 REGISTERED This product is subject to the following operating requirements and the Life and Safety Critical Application Sales Policy: Refer to: Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. 217 Murata Power Solutions, Inc. KDC_MEJ1_E1 Page 9 of 9

SELECTION GUIDE. Nominal Input Voltage. Input reflected ripple 12V & 15V input types 20

SELECTION GUIDE. Nominal Input Voltage. Input reflected ripple 12V & 15V input types 20 www.murata-ps.com MGJ2 Series SELECTION GUIDE FEATURES Optimised bipolar output voltages for IGBT/ Mosfet gate drives Reinforced insulation to UL609 recognised ANSI/AAMI ES60601-1, 1 MOPP/2 MOOP s recognised