General-purpose Foil Strain Gages KFG
|
|
- Gerald Walters
- 6 years ago
- Views:
Transcription
1 General-purpose Foil Strain Gages KFG -8 General-purpose Foil Strain Gages in KFG Series Grid width Grid length (Gage length) Base length The KFG series gages use polyimide resin for the base approx. μm thick, ensuring excellent flexibility. Besides indoor measurement, the outstanding moisture resistance lets them effectively perform outdoor measurement. Unless directly exposed to water drop, no coating treatment is required. Applicable Adhesives and Operating Temperature Range after Curing CC-A: -96 to 0 C ( 0 to 80 C with vinyl-coated cable attached) CC-: -0 to 0 C ( 0 to 80 C with vinyl-coated cable attached) CC-6: -0 to 00 C ( 0 to 80 C with vinyl-coated cable attached) EP-40: - to 0 C ( 0 to 80 C with vinyl-coated cable attached) PC-600: -96 to 0 C ( 0 to 80 C with vinyl-coated cable attached) base width Gage lead Notes on pre-attached lead wire cables Standard color of the -wire cable pre-attached to uniaxial gages is red (R). If desired, a white, green, yellow or black cable can be pre-attached. Standard -wire cable pre-attached to uniaxial gages has red stripes. If desired, the red stripes can be changed to blue or yellow stripes. In the case of a triaxial gage, -wire cables are color-coded with red, white and green stripes for 0, and, respectively and -wire cables, with red, yellow and blue stripes for 0, and, respectively. The letter code is S in common. Types, lengths and codes of lead wire cables pre-attached to KFG series gages Types -wire -wire C,C,C,C, C,C,C, C6,D,D,D, C,C6, D4,D6,D9,D6, D,D4,D9, D7,D9,D8, D6,D7,D9, Length * D9 and D D8 and D cm NC NC 0 cm N0C N0C m NM NM m m Oprg. temp. range ** 96 to 0 C Twisted for 0 cm or longer (With some exception) Vinyl-coated flat -wire cable Vinyl-coated flat -wire cable Middle-temperature -wire cable C,C,C, C,C6, D9 and D9 D,D4, D6,D7, D8,D9, D9 C,C,C, C,C6, D,D9,D9 and D D,D4, D6,D7, D8 and D9 C,C,C, C,C6, D,D4,D9, D6,D7,D9, D8 and D9 Middle-temperature -wire cable C,C,C, C,C6, D,D,D4,D9, D6,D7,D9, D8,D and D9 RC R0C RM RM RM LCR LCS LCR LCS RC L0CR L0CS L0CR L0CS R0C LMR LMS LMR LMS RM LMR LMS LMR LMS RM LMR LMS LMR LMS RM -0 to 80 C -00 to 0 C L-6, L-9 for 6 m or longer L-7, L-0 for 6 m or longer L- L- When ordering, suffix the lead wire cable code model number with a space in between. E.g. KFG--0-C- N0C for the gage with a polyester-coated -wire cm long KFG--0-C- NC KFG--0-C- LMR for the gage with a vinyl-coated flat -wire cable m long KFG--0-C- LMR KFG--0-D7- LMS for the gage with a vinyl-coated flat -wire cable m long KFG--0-D7- LMS KFG--0-C- RM for the gage with a middle-temperature -wire cable m long KFG--0-C- RM KFG--0-D7- RM for the gage with a middle-temperature -wire cable m long KFG--0-D7- RM If no lead wire cable code is suffixed, the gage is delivered with gage leads only (Silver-clad copper wires mm long) For the types of lead wire cables, refer to page - and
2 -9 General-purpose Foil Strain Gages KFG -9 Uniaxial Silver-clad copper gage leads mm long Resistance: 0 Ω Gage factor: Approx.. KFG-0-0-C *Figure is KFG-0-0-C- KFG-0-0-C *Figure is KFG-0-0-C-6 KFG-0-0-C *Figure is KFG-0-0-C- KFG-6-0-C *Figure is KFG-6-0-C-7 KFG--0-C *Figure is KFG--0-C- KFG-4N-0-C *Figure is KFG-4N-0-C-6 KFG--0-C *Figure is KFG--0-C- KFG--0-C *Figure is KFG--0-C-7 KFG-N-0-C *Figure is KFG-N-0-C- KFG--0-C *Figure is KFG--0-C-6 KFG-N-0-C *Figure is KFG-N-0-C- KFG-0-0-C *Figure is KFG-0-0-C-7 KFG-0-0-C *Figure is KFG-0-0-C- KFG-0-0-C- KFG-0-0-C-6 KFG-0-0-C- KFG-0-0-C-7 KFG-0-0-C- KFG-0-0-C-6 KFG-0-0-C- KFG-0-0-C-7 KFG-0-0-C- KFG-0-0-C-6 KFG-0-0-C- KFG-0-0-C-7 KFG-6-0-C- KFG-6-0-C-6 KFG-6-0-C- KFG-6-0-C-7 KFG--0-C- KFG--0-C- KFG--0-C-6 KFG--0-C- KFG--0-C-7 KFG-4N-0-C- KFG-4N-0-C-6 KFG-4N-0-C- KFG-4N-0-C-7 KFG--0-C- KFG--0-C-6 KFG--0-C- KFG--0-C-7 KFG--0-C- KFG--0-C- KFG--0-C-6 KFG--0-C- KFG--0-C-7 KFG-N-0-C- KFG-N-0-C-6 KFG-N-0-C- KFG-N-0-C-7 KFG--0-C- KFG--0-C-6 KFG--0-C- KFG--0-C-7 KFG-N-0-C- KFG-N-0-C-6 KFG-N-0-C- KFG-N-0-C-7 KFG-0-0-C- KFG-0-0-C-6 KFG-0-0-C- KFG-0-0-C-7 KFG-0-0-C- KFG-0-0-C-6 KFG-0-0-C- KFG-0-0-C-7 Base color Common steel Stainless steel Aluminum Magnesium alloy (Linear expansion coefficient based on the base color to distinguish) For lumber For lumber A min. qty 0 PC.
3 General-purpose Foil Strain Gages KFG -0 Biaxial, 0 /stacked rosette Resistance: 0 Ω Gage factor: Approx.. *Figure is KFG-0-0-D6- KFG-0-0-D6- KFG-0-0-D6-6 KFG-0-0-D6- KFG-0-0-D6-7 KFG--0-D6- KFG--0-D6-6 KFG--0-D6- KFG--0-D6-7 KFG--0-D6- KFG--0-D6-6 KFG--0-D6- KFG--0-D6-7 KFG--0-D6- KFG--0-D6-6 KFG--0-D6- KFG--0-D6-7 KFG--0-D6- KFG--0-D6-6 KFG--0-D6- KFG--0-D6-7 Triaxial, 0 //stacked rosette for Stress Analysis Resistance: 0 Ω Gage factor: Approx.. KFG-0-0-D7- *Figure is KFG-0-0-D7- Biaxial, 0 / plane arrangement Resistance: 0 Ω Gage factor: Approx.. KFG-0-0-D7-6 KFG-0-0-D7- KFG-0-0-D7-7 KFG--0-D7- KFG--0-D7-6 KFG--0-D7- KFG--0-D7-7 KFG--0-D7- KFG--0-D7-6 KFG--0-D7- KFG--0-D7-7 KFG--0-D7- KFG--0-D7-6 KFG--0-D7- KFG--0-D7-7 KFG--0-D7- KFG--0-D7-6 KFG--0-D7- KFG--0-D7-7 Base color *Figure is KFG--0-D- KFG--0-D- KFG--0-D-6 KFG--0-D- KFG--0-D Biaxial, 0 / for Torque Resistance: 0 Ω Gage factor: Approx.. *Figure is KFG--0-D- KFG--0-D- KFG--0-D-6 KFG--0-D- KFG--0-D A min. qty 0 PC. -0
4 - General-purpose Foil Strain Gages KFG Biaxial, 0 / for Torque Resistance: 0 Ω Gage factor: Approx.. *Figure is KFG--0-D- KFG--0-D- KFG--0-D-6 KFG--0-D- KFG--0-D-7 End color Triaxial, 0 // Resistance: 0 Gage factor: Approx.. *Figure is KFG--0-D-6 KFG--0-D- KFG--0-D-6 KFG--0-D- KFG--0-D-7.6 Triaxial, 0 /0 /40 Resistance: 0 Ω Gage factor: Approx *Figure is KFG--0-D4-6 0 KFG--0-D4- KFG--0-D4-6 KFG--0-D4- KFG--0-D4-7 KFG--0-D4- KFG--0-D4-6 KFG--0-D4- KFG--0-D Quadraxial, 0 /0 //0 Resistance: 0 Ω Gage factor: Approx *Figure is KFG--0-D6-0 KFG--0-D6- KFG--0-D6-6 KFG--0-D6- KFG--0-D Uniaxial, with lead wires from both ends Resistance: 0 Ω Gage factor: Approx.. - *Figure is KFG--0-C-7 *Figure is KFG--0-C-7 KFG--0-C- KFG--0-C-6 KFG--0-C- KFG--0-C-7 KFG--0-C- KFG--0-C-6 KFG--0-C- KFG--0-C A min. qty 0 PC.
5 General-purpose Foil Strain Gages KFG - Uniaxial, for shearing strain Resistance: 0 Ω Gage factor: Approx.. *Figure is KFG--0-C- *Figure is KFG--0-C6- Uniaxial -element, for concentrated stress measurement Resistance: 0 Ω Gage factor: Approx.. Torque measurement is possible by using C and C6 in combination. KFG--0-C- KFG--0-C-6 KFG--0-C- KFG--0-C-7 KFG--0-C6- KFG--0-C6-6 KFG--0-C6- KFG--0-C6-7 End color P Pitch *Figure is KFG--0-D9-6 N0C P = mm for gage length mm P = mm for gage length mm KFG--0-D9- KFG--0-D9-6 KFG--0-D9- KFG--0-D9-7 KFG--0-D9- KFG--0-D9-6 KFG--0-D9- KFG--0-D9-7 N0C N0C N0C N0C N0C N0C N0C N0C KFG--0-D9- N0C KFG--0-D9-6 N0C KFG--0-D9- N0C KFG--0-D9-7 N0C KFG--0-D9- N0C P P = mm for gage length mm KFG--0-D9-6 N0C Pitch P = mm for gage length mm KFG--0-D9- N0C *Figure is KFG--0-D9-6 N0C KFG--0-D9-7 N0C Biaxial element stacked rosette (for stress concentration measurement) Resistance: 0 Ω Gage factor: Approx A min. qty PC. A min. qty PC. A min. qty PC. A min. qty PC. Upper side gage pattern P Pitch Pmm Lower side gage pattern *Figure is KFG--0-D9- N0C Uniaxial 60Ω gages Resistance: 60 Ω Gage factor: Approx.. *Figure is KFG--60-C-7 KFG--0-D9- N0C KFG--0-D9-6 N0C KFG--0-D9- N0C KFG--0-D9-7 N0C Use gages in parallel connection (bending compensation possible). KFG--60-C- KFG--60-C-6 KFG--60-C- KFG--60-C-7 KFG--60-C- KFG--60-C-6 KFG--60-C- KFG--60-C Figures in parentheses are for lower side gages. A min. qty PC. A min. qty 0 PC. -
6 - General-purpose Foil Strain Gages KFG Uniaxial 0Ω gages Resistance: 0 Ω Gage factor: Approx.. *Figure is KFG--0-C- KFG--0-C- KFG--0-C-6 KFG--0-C- KFG--0-C-7 KFG--0-C- KFG--0-C-6 KFG--0-C- KFG--0-C-7 KFG--0-C- KFG--0-C-6 KFG--0-C- KFG--0-C-7 KFG--0-C- KFG--0-C-6 KFG--0-C- KFG--0-C-7 End color Biaxial 0Ω gages, 0 / stacked rosette Resistance: 0 Ω Gage factor: Approx.. *Figure is KFG--0-D6-6 KFG--0-D6- KFG--0-D6-6 KFG--0-D6- KFG--0-D6-7 KFG--0-D6- KFG--0-D6-6 KFG--0-D6- KFG--0-D6-7 KFG--0-D6- KFG--0-D6-6 KFG--0-D6- KFG--0-D6-7 KFG--0-D6- KFG--0-D6-6 KFG--0-D6- KFG--0-D Triaxial 0Ω gages, 0 // stacked rosette Resistance: 0 Ω Gage factor: Approx.. - *Figure is KFG--0-D7-7 KFG--0-D7- KFG--0-D7-6 KFG--0-D7- KFG--0-D7-7 KFG--0-D7- KFG--0-D7-6 KFG--0-D7- KFG--0-D7-7 KFG--0-D7- KFG--0-D7-6 KFG--0-D7- KFG--0-D7-7 KFG--0-D7- KFG--0-D7-6 KFG--0-D7- KFG--0-D A min. qty 0 PC.
7 General-purpose Foil Strain Gages KFG -4 Biaxial 0Ω gages, 0 / Resistance: 0 Ω Gage factor: Approx.. End color *Figure is KFG--0-D-6 KFG--0-D- KFG--0-D-6 KFG--0-D- KFG--0-D Biaxial 0Ω gages for torque, 0 / Resistance: 0 Ω Gage factor: Approx.. *Figure is KFG--0-D- *Figure is KFG--0-D- Uniaxial 00Ω gages for transducers Resistance: 00 Ω Gage factor: Approx.. KFG--0-D- KFG--0-D-6 KFG--0-D- KFG--0-D-7 KFG--0-D- KFG--0-D-6 KFG--0-D- KFG--0-D *Figure is KFG--00-C-7 KFG--00-C- KFG--00-C-6 KFG--00-C- KFG--00-C-7 KFG--00-C- KFG--00-C-6 KFG--00-C- KFG--00-C Uniaxial 000Ω gages for transducers Resistance: 000 Ω Gage factor: Approx.. *Figure is KFG--K-C-7 KFG--K-C- KFG--K-C-6 KFG--K-C- KFG--K-C-7 KFG--K-C- KFG--K-C-6 KFG--K-C- KFG--K-C A min. qty 0 PC. -4
8 - General-purpose Foil Strain Gages KFG KFG Series Foil Strain Gages with Gage Terminal Uniaxial Resistance: 0 Ω Gage factor: Approx.. (When the clip-equipped dedicated cable is used, the operating temperature range of each adhesive after curing is 0 to 80 C.) *Figure is KFG--0-C- T-F7 Biaxial, 0 / stacked rosette Resistance: 0 Ω Gage factor: Approx.. *Figure is KFG--0-D6-6 T-F7 Triaxial, 0 // stacked rosette Resistance: 0 Ω Gage factor: Approx.. *Figure is KFG--0-D7- T-F7 KFG--0-D6- T-F7 KFG--0-D6-6 T-F7 KFG--0-D6- T-F7 KFG--0-D6- T-F7 KFG--0-D6-6 T-F7 KFG--0-D6- T-F7 KFG--0-D7- T-F7 KFG--0-D7-6 T-F7 KFG--0-D7- T-F7 KFG--0-D7- T-F7 KFG--0-D7-6 T-F7 KFG--0-D7- T-F7 KFG Series Foil Strain Gages for Boring Method Triaxial, 0 / / Resistance: 0 Ω Gage factor: Approx.. T-C6 KFG gages equipped with a gage terminal enable one touch connection/disconnection of the lead wire cable. They are suitable for residual stress measurement with the cutting method. A clip equipped dedicated cable T-C6 (Vinyl-coated, m long) is optionally available. Applicable Adhesives and Operating Temperature Range after Curing PC-600: -96 to 0 C CC-A: -96 to 0 C CC-: -0 to 0 C KFG--0-C- T-F7 KFG--0-C-6 T-F7 KFG--0-C- T-F7 KFG--0-C- T-F7 KFG--0-C-6 T-F7 KFG--0-C- T-F7 Designed to measure residual stress released by the boring method. Applicable Adhesives and Operating Temperature Range after Curing CC-A: -96 to 0 C CC-: -0 to 0 C CC-6: -0 to 00 C End color CC-6: -0 to 00 C EP-40: - to 0 C EP-40: - to 0 C PC-60: -96 to 0 C mm long 0.4 mm long 0.4 mm long 0.4 mm long 0.4 mm long 0.4 mm long - For KFG gages with the lead wire cable pre-attached, refer to page -8. *Figure is KFG--0-D8-7 KFG Series Foil Strain Gages for Measuring Axial Tension of Bolts If it is difficult to bond a strain gage surface of a bolt for measuring the Uniaxial Resistance: 0 Ω Gage factor: Approx..9 Length from the tip of base center of grid L KFG-.7mm KFG-..7mm L KFG--0-D8- KFG--0-D8-6 KFG--0-D8- KFG--0-D8-7 KFG-.-0-D8- KFG-.-0-D8-6 KFG-.-0-D8- KFG-.-0-D Gage center diameter 0.8 Gage center diameter. tightening stress, these gages enable the measurement by embedding into a hole, mm diameter, bored from the top head of the bolt. They are applicable to materials having a linear expansion coefficient of μm/m per C. 0.4 mm long Applicable Adhesives and Operating Temperature Range after Curing EP-80 Normal temperature to 0 C A min. qty PC. Options Dedicated gage terminal Model T-F9 KFG--0-C0- KFG-.-0-C0-.. Dimensions Base material Conductor material Outer: 6 Inner:. Glass epoxy Copper foil For bolt gages app. 6 app T-F9 Bore diameter Bore diameter A min. qty 0 PC.
General-purpose Foil Strain Gages (KFGS)
General-purpose Foil Strain Gages (KFGS) -8 General-purpose Foil Strain Gages KFGS Grid width Grid length (Gage length) length The KFGS series gages use polyimide resin for the base that is approx. μm
More informationGeneral-purpose Foil Strain Gages KFGS Series
General-purpose Foil Strain Gages KFGS Series KFGS New strain gages with the world highest level performance Point CE compliant All models are RoHS compliant Point Improved Quality Excellent long-term
More informationOvertravel of 3.5 mm max. Power source DC D5C-1DS0 D5C-1DP0 D5C-1DA0 AC D5C-1AS0 D5C-1AP0 D5C-1AA0 Antenna only D5C-00S0 D5C-00P0 D5C-00A0
Touch Switch Unique 18 mm Capacitive Touch Switch with Choice of Three Actuators is Activated with Only a Very Slight Physical Contact Lightweight objects, such as thin wire or foil can be accurately detected.
More informationRectangular Type APS-S/M Series
APS-CU APS- 5 APS-F/U APS-S/M APS-CK APS-0/ APS-GK APS-GM APS-GMD APS-GMC Small design offered in two types: front face sensing and upper sensing. Different-frequency type that allows close-contact installation.
More informationOptical Ground Wires (OPGW)
Optical Ground Wires (OPGW) Presented by NSW (Norddeutsche Seekabelwerke GmbH) 4-Nov-13 / 1 NSW The Company Plant Overview 4-Nov-13 / 2 NSW Ground Wire History Our Experience Ground Wire Cables production
More informationKyowa Measuring Instruments Digest Edition 2017 to 2018
Kyowa Measuring Instruments Digest Edition 2017 to 2018 Strain Gages Load Cells Pressure Transducers Acceleration Transducers Torque Transducers Displacement Transducers Dynamic Strain Amplifiers Data
More informationTL-W. Standard Flat Inductive Proximity Sensors. Ordering Information. Front and side facing surface IP67 DC 2-wire and DC 3-wire models
Standard Flat Inductive Proximity Sensors Front and side facing surface IP67 DC -wire and DC -wire models Ordering Information DC -wire Models Shape distance Model Output and operating status mm MD1 *1
More informationFPC CONNECTORS Y3FT (0.3 mm pitch) with FPC tabs
AYF31 FPC CONNECTORS FOR FPC CONNECTION FPC CONNECTORS Y3FT (0.3 mm pitch) with FPC tabs (Former Name: YF31) FEATURES 1. Low-profile, space-saving design (pitch: 0.3mm) The 0.9mm height, 3.0mm depth contributes
More informationSEMITOP Mounting instructions
SEMITOP Mounting instructions ESD protection... 1 Temperature sensor... 1 Electrical isolation... 2 Heat sink specification... 2 Mounting surface... 3 Assembling Steps... 4 Thermal grease application...
More informationAC AC AC
AC104.01-10 AC104.01-100 AC104.01-500 Description The hermetic sealed industrial piezoelectric accelerometer model 104 is design to monitor the vibration in harsh industrial environment. It uses the industry
More information15 Industrial Tools. Recognized by Professionals. Work Together. Scribing Needle. Replacement of Scribing Needle. Features. Use A B
Industrial Tools Recognized by Professionals Work Together With battery : Sleeve package Card Box Clear package Scribing Needle 74444 74468 78638 78646 7864 7860 7444 74469 Retracts needle by turning body
More informationRSLA absolute high accuracy stainless steel scale
L-9517-9387-03-C System features Single track optical absolute scale 30 µm nominal scale pitch ensures exceptional motion control performance Robust special composition stainless steel with defined coefficient
More informationOptiLine 45 Floor boxes
OptiLine 45 Floor outlet boxes P89490 Type Colour Dimensions A/B/C (mm) Qty per pack Ref. No. Floor outlet box including mounting frames for Altira, trim frame with four quick-fix devices and lid with
More informationTechnical data. Contact material: with double break or 2 NC contacts Switching system: A IEC snap action with positive break NC contacts
Emergency pull-wire switches ZS 71... NA Technical data Contact variations * 63 mm for version 200 N pre-tensioning force To EN 418/IEC 60947-5-5 Metal enclosure 2 contacts Integrated emergency-stop button
More informationCASSIOPEA A ++ A + A. EU Regulation 874/ Illumination equipment energy classes. Cassiopea. .0 Inox
67 CASSIOPEA Square or round luminaire for installation in-ground where recessing depth are limited (up to 10mm) recessed. Configuration: die-cast aluminium structure, EN AB-47100 alloy (low copper content).
More informationALUMINUM PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Structural Tube, Pipe and Bar shall be in accordance with ASTM B22 or ASTM B429, Alloy 606-T6. End Rail 90 bends and corner bends with maximum 4-0" post spacing, may be Alloy
More informationFPC connectors (0.3mm pitch) Front lock with FPC tabs
AYF31 For FPC FPC connectors (0.3mm pitch) Front lock with FPC tabs Y3FT Series FEATURES 1. Low-profile, space-saving design (pitch: 0.3mm) The 0.9mm height, 3.0mm depth contributes to the miniaturization
More informationSTEEL PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Pipe Rails and s shall be in accordance with ASTM A5 Grade B for standard weight pipe and ASTM A500 Grade B, C or D or ASTM A50 for structural tube. Bars for handrail supports
More informationSturdi-Wall Design Manual for SW46, SW66, SW63, SW64, SW60, SW83, SW84, and SW80 Models
Sturdi-Wall Design Manual for SW46, SW66, SW63, SW64, SW60, SW83, SW84, and SW80 Models Project Number ME086-05 by Brent Leatherman, P.E. Timber Tech Engineering, Inc E-Mail: bl@timbertecheng.com January
More informationSPECIFICATION FOR APPROVAL 1/8W 0816 LOW RESISTNACE CHIP RESISTOR
PAGE : 1 OF 11 1/8W 0816 LOW RESISTNACE CHIP RESISTOR 1. Scope This specification applies to 0.8mm x 1.60mm size 1/8W, fixed metal film chip resistors rectangular type for use in electronic equipment.
More informationEach Height Master is supplied with a gauge block for reference-height setting. Fitted wooden case supplied. SPECIFICATIONS
Height Master SRIS 515 Models with the the staggered arrangement of blocks have two measuring faces on the same level, one facing up and the other down (except for 515-310). Staggered 20mm blocks (movable)
More informationK3D60a ±100N. Description. The K3D60a three-axis sensor is suitable for measuring force on three mutually perpendicular axes.
K3D60a ±100N Description The K3D60a three-axis sensor is suitable for measuring force on three mutually perpendicular axes. The new 3-axis sensor K3D60a is a further development of the series K3D60 and
More informationGROUNDING EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA
PAGE 86 5000 500 5040 5060 5080 500 50 540 560 580 500 540 560 580 5300 5340 5360 5380 5400 5440 5460 5480 5500 5540 5560 700 705 75 70 75 730 740 745 750 755 765 770 775 780 790 7300 7305 730 C 00 C 0
More informationMetal Film Resistor Kit
Ratings: Rated Power 0.5W at 70 C Max. Working Voltage 350V Max. Overload Voltage 700V Dielectric Withstanding Voltage 700V Rated Ambient Temp. 70 C Operating Temp. Range -55 C to +155 C Resistance Tolerance
More informationMetal Film Resistor Kit
Ratings: Rated Power 0.25W at 70 C Max. Working Voltage 250V Max. Overload Voltage 500V Dielectric Withstanding Voltage 500V Rated Ambient Temp. 70 C Operating Temp. Range -55 C to +155 C Resistance Tolerance
More informationHollo Set Drop-In Anchors
Description The Hollo Set drop-in anchor is an internally threaded, flush mount expansion anchor designed for use in hollow and solid base materials. In hollow concrete block and precast hollow core plank,
More informationUP4 LEARN-A-LOT (PLAYFUL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR
More informationRESOLUTE FS absolute optical encoder with Siemens DRIVE-CLiQ serial communications
L-9517-9701-01-C RESOLUTE FS absolute optical encoder with Siemens DRIVE-CLiQ serial communications True absolute non-contact optical encoder system: no batteries required ISO 13849: 2015 Pld IEC 61508:
More informationFor FPC. FPC connectors (0.2mm pitch) Back lock
0.9 For FPC FPC connectors (0.2mm pitch) Back lock Y2B Series AYF21 New FEATURES 1. Slim and low profile design (Pitch: 0.2 mm) 0.2 mm pitch back lock design and the slim body with a 3.15 mm depth (with
More informationUP43 LEARN-A-L0T (NATURAL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR
More informationODiSI Fiber Optic Sensor Installation Guide
Application Note May 30, 2017 ODiSI Fiber Optic Sensor Installation Guide Contents 1. Introduction... 1 2. Contents of Fiber Optic Sensor Installation Kit... 2 3. Mounting the Strain Sensor... 2 3.1. Planning
More informationTorque Sensor Accessories and Services
------------------- Torque Sensor Accessories and Services Highlights Strain gage signal conditioners Cable assemblies Speed sensors Shunt calibration modules and thermocouples Calibration services PCB
More informationHandling and Electrical Contacting of Piezoceramic Components
Technical Note Handling and Electrical Contacting of Piezoceramic Components Contents About this Document... 2 Symbols and Typographic Conventions... 2 Safety Instructions... 2 Personnel Qualification...
More informationExperimental Evaluation of Metal Composite Multi Bolt Radial Joint on Laminate Level, under uni Axial Tensile Loading
RESEARCH ARTICLE OPEN ACCESS Experimental Evaluation of Metal Composite Multi Bolt Radial Joint on Laminate Level, under uni Axial Tensile Loading C Sharada Prabhakar *, P Rameshbabu** *Scientist, Advanced
More informationULT R A SPAC E SAV E R
ULT R A SPAC E SAV E R Double Capacity, Modular Construction The Ultra Space Saver provides easy and ample space for u-lock security on nearly any bike, including bikes with fenders. Thanks to design enhancements,
More informationFor FPC. FPC connectors (0.3mm pitch) Back lock
0.9 For FPC FPC connectors (0.3mm pitch) Back lock AYF33 Y3B/Y3BW Series New Y3B Y3BW is added. FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) Back lock type and the slim body with a 3.15 mm depth
More informationCIRRUS AIRPLANE MAINTENANCE MANUAL
FASTENER AND HARDWARE GENERAL REQUIREMENTS 1. DESCRIPTION This section contains general requirements for common hardware installation. Covered are selection and installation of cotter pins, installation
More informationAdhesive Air Terminal Bases. Universal Surface Bases. Offset Parapet Air Terminal Bases. Section 3.2. Air Terminals & Air Terminal Bases
equipment catalog 3-5 Bases Adhesive Bases Used for mounting on membrane or built-up roofs. Mounted with adhesive or plastic roofing cement. The cast base has a mechanical conductor connector. BS-C-3/8ID-ADH-AT
More informationINTERMEDIATE METAL CONDUIT
PRODUCT GUIDE 08 CONDUIT PIPES CONDUIT FITTINGS FITTINGS FOR FLEXIBLE CONDUITS METALLIC ELECTRICAL BOXES AND COVERS CONDUIT BODIES WEATHERPROOF BOXES AND COVERS CHANNELS & SUPPORTS METAL ENCLOSURES CHANNELS
More informationInstallation Guide. English. FS62 Weldable Strain Sensor
Installation Guide English FS62 Weldable Strain Sensor Hottinger Baldwin Messtechnik GmbH Im Tiefen See 45 D-64239 Darmstadt Tel. +49 6151 803-0 Fax +49 6151 803-9100 info@hbm.com www.hbm.com HBM FiberSensing,
More informationCH # 8. Two rectangular metal pieces, the aim is to join them
CH # 8 Screws, Fasteners, and the Design of Non-permanent Joints Department of Mechanical Engineering King Saud University Two rectangular metal pieces, the aim is to join them How this can be done? Function
More informationPART MATERIALS. Section Fencing Materials. Description
PART 03000 - MATERIALS Section 03010 - Fencing Materials Description 03010.00 Scope - This section consists of the test requirements, specifications and tolerances for barbed wire, woven wire and chain
More informationT22. Torque transducer. Special features. Data sheet
T22 Torque transducer Special features - Nominal (rated) torques 0.5 Nm, 1 Nm, 2 Nm, 5 Nm, Nm, Nm, 50 Nm, 0 Nm, 0 Nm, 500 Nm and 1 knm - Nominal (rated) rotational speed up to 000 rpm (depending on measuring
More informationFasteners. Fastener. Chapter 18
Fasteners Chapter 18 Material taken from Mott, 2003, Machine Elements in Mechanical Design Fastener A fastener is any device used to connect or join two or more components. The most common are threaded
More information* Peaks of 1.3mm MAX allowed only in a rate of 2% or less
COAXIAL CABLE 50 OHM LOW LOSS 956163-3 A C 800275 Rev: D. 08 October 2014 Rev: C Maximum MHz db/100m MHz db/100m 100 16.3 1000 56.5 200 23.5 1500 70.2 500 38.2 1800 77.2 800 49.5 2000 81.5 Diameter of
More informationframe bracket Dodge x 2 & 4 x 4 (6-1/2 & 8 Boxes Includes Mega Cab)
, Rev 4 02/19 frame bracket 8552026 Dodge 3500 4 x 2 & 4 x 4 (6-1/2 & 8 Boxes Includes Mega Cab) 14 5 7 2 4 11 9 10 17 3 6 1 8 13 15 16 18 12 ITEM PART # DESCRIPTION QTY. 1 00085.50 FLAT WASHER 10 2 00248
More informationWDM-135A (2-wire type) WDM-136A (4-wire type) CONDUCTIVITY TRANSMITTER. Functions Features. Structure diagram. 10/ cm (note 3) 2-wire system
CONDUCTIVITY TRANSMITTR WDM-A (-wire type) WDM-6A (-wire type) It is a type of small firm aluminum -electrode site-installation CONDUCTIVITY TRANSMITTR (signal transmitter) and easy operate. The device
More informationFortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards.
Installation Instructions for Fortress Vertical Cable Panel System with Brackets and Fe Posts It is the responsibility of the installer to meet all code and safety requirements, and to obtain all required
More informationCF Series AXC5/AXC6. FEATURES 1. Vertical mating type with a 0.8 mm mated height low profile design
For board-to-micro coaxial wire Micro coaxial connectors (Low profile) AC5/AC6 CF Series 2. with strong resistance to various environments provides high contact reliability and facilitates connection work
More informationAdvanced High-Density Interconnection Technology
Advanced High-Density Interconnection Technology Osamu Nakao 1 This report introduces Fujikura s all-polyimide IVH (interstitial Via Hole)-multi-layer circuit boards and device-embedding technology. Employing
More informationDetection of Incorrectly Set Work Press Position Confirmation Detection of Bent Drills. Press D5C
Touch Switch CSM DS_E 3 Unique 18-mm-dia. Capacitive Touch Switch with Choice of Three Actuators is Activated with Only a Very Slight Physical Contact Only a slight activation force is required, enabling
More informationSHIELDED WINDOWS. General Description. Orientation. Shielding Test Data. Tolerances. 32 BOMBERG & CO. ApS Tlf Fax
Attenuation (db) SHIELDED WINDOWS General Description Shielded windows consist of one or more window layers with a conductive intermediate layer. Applicable for all visual display systems, e.g. in meters
More informationMounting Approaches for RF Products Using the Package Type
Application Note: APPNOTE-012 Rev. A APPLICATION NOTE Mounting Approaches for RF Products Using the 780019 Package Type Introduction The objective of this application note is to provide users of Cree RF
More informationSlip and yield resistance of friction type of high strength bolted connections with over-sized holes
IABSE-JSCE Joint Conference on Advances in Bridge Engineering-II, August 8-10, 2010, Dhaka, Bangladesh. ISBN: 978-984-33-1893-0 Amin, Okui, Bhuiyan (eds.) www.iabse-bd.org Slip and yield resistance of
More informationPosition switches FM series
B Position switches FM series Selection diagram 0 08 0 A A 0 A 0 external rubber gasket external rubber gasket external rubber gasket external rubber gasket 69 stainless steel round rod square rod fiber
More information19. SHIELDED WINDOWS.
19. SHIELDED WINDOWS. GENERAL INFORMATION Shielded windows consist of one or more window layers with a conductive intermediate layer. They are applicable for all visual display systems, e.g. in meters
More informationisd dunaferr Product catalogue
isd dunaferr Product catalogue HOT-DIP GALVANIZED PRODUCTS The base material of hot-dip galvanizing is cold rolled wide coil. Metal coating is performed in course of continuous hot-dip galvanizing Sendzimir
More informationThe KATHREIN-Werke KG develops, manufactures and markets components and systems for antenna and communications technology.
The KATHREIN-Werke KG develops, manufactures and markets components and systems for antenna and communications technology. Our ecological policy, followed for many years, and our product spectrum using
More informationCast-in Ferrule Connections Load/Displacement Characteristics in Shear
Cast-in Ferrule Connections Load/Displacement Characteristics in Shear Ian Ferrier 1 and Andrew Barraclough 2 1 Product Manager - Connections, ITW Construction Systems ANZ. 2 Research and Development Manager,
More informationEVOLUTE absolute optical encoder with Yaskawa serial communications
L-9515-9641-01-C EVOLUTE absolute optical encoder with Yaskawa serial communications True absolute non-contact optical encoder system: no batteries required Wide set-up tolerances for quick and easy installation
More informationPage 1 of 6 A Historical Perspective From Aristotle to Hawking Force & Its Effects Measurement Limitations The Strain Gage Sensor Designs Measuring Circuits Application & Installation Process Pressure
More informationUNSIGNED HARDCOPY NOT CONTROLLED
UNSIGNED HRDCOPY Subject: PPROVED BY STTUS PURPOSE FFECTED FUNCTIONS Component Board ssembly Manager, Hardware Engineering Maintenance Revision Defines the requirements for the mounting and wiring of components,
More informationSECTION MASONRY ANCHORAGE AND REINFORCEMENT. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 04080 MASONRY ANCHORAGE AND REINFORCEMENT Display hidden notes to specifier. (Don't know how? Click Here) A. Post installed masonry anchors. B. Miscellaneous
More informationCHAPTER 6 FABRICATION OF PROTOTYPE: PERFORMANCE RESULTS AND DISCUSSIONS
80 CHAPTER 6 FABRICATION OF PROTOTYPE: PERFORMANCE RESULTS AND DISCUSSIONS 6.1 INTRODUCTION The proposed permanent magnet brushless dc motor has quadruplex winding redundancy armature stator assembly,
More informationENERGY CORDAFLEX (SMK) (N)SHTOEU Low Voltage Reeling Cable
ENERGY (N)SHTOEU Low Voltage Reeling Cable Technical Data Type Type designation Approvals/standards Application (N)SHTOEU-J/-O DIN VDE 0250, Part 814; VDE-Reg.-Nr. 7519; GOST R Flexible reeling cable for
More informationSTATE WHEN ORDERING HI =...
STATE WHEN ORDERING HI =... mm Surface treatment of outer walls and night closing doors Stainless steel cladding Special anodized... RAL... Special powder coating...... Surface treatment of door leaves
More informationSUPERSEDED. NOT the LATEST REVISION
Figure 1 OPTIMATE 2.5mm bayonet ceramic connector kits listed in Figure 1 are designed to be applied to fiber optic cable. Coupling Receptacle Kit 501381 1 is used to mate two bayonet connectors in free
More informationPrecision Thermistor Sensors
Precision Thermistor Sensors For Laboratory Applications ON-400 Series U For Use in Laboratory or Other High-Accuracy Applications U Rugged Construction Can Be Used for Short Term Water and Soil Readings
More informationHandling Precaution for Terminal and Connector
1 Handling Precaution for Terminal and Connector Handling Precaution for Terminal and Connector This manual is to describe basic precautions for use of terminal and connector in the following. Make use
More informationLLK-AR45 LED Lighting Heatsink Enclosure Kit. LLK-AR45 LED Illuminator Heatsink Enclosure Kit
Illuminator The lighting heatsink enclosure kit is a highquality and high-performance multi-purpose LED lighting unit. The large, extruded aluminum heatsink has high thermal conductivity, is light weight
More informationS-BT screw-in stainless steel and carbon steel threaded studs
S-BT screw-in stainless steel and carbon steel threaded studs Product data Dimensions S-BT-MR M10/15 SN 6 S-BT-MR M10/15 SN 6 AL**) S-BT-MR W10/15 SN 6 S-BT-MR W10/15 SN 6 AL**) S-BT-MR M10/15 SN 5 ***)
More informationRGH24 encoder system. Data sheet L C. RGH24 readhead: RGS20 scale:
L-9517-9677-01-C Renishaw s RGH24 series is a non-contact optical encoder system. The compact readhead features a set-up led indicator, unique filtering optics for excellent dirt immunity, and integral
More informationModels Tension/Compression Pancake Load Cell Model 3174 with tension base DESCRIPTION FEATURES
Models 3174-3176 Model 3174 Model 3174 with tension base DESCRIPTION Models 3174, 3175, and 3176 are fatigue-resistant, low-profile tension and compression load cells that are well suited to materials
More informationForce and strain sensors.
Force and strain sensors. Measure. Test. Control. Edition 2016 Force and strain sensors by Baumer combine tried and tested technology and sophisticated innovations. 1 Contents. Introduction 1 Product key
More informationSECTION CABLE TRAYS FOR COMMUNICATIONS SYSTEMS
SECTION 270536 - CABLE TRAYS FOR COMMUNICATIONS SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationProduct Information Report Hardflex Band Saw Blades
Overview Hardflex Bandsaw Blades are great all-purpose blades for cutting almost any metal. Cuts tough material like stainless steel. Works equally well on solids, tubing and structural shapes. Features/Benefits
More informationH O O P RAC K. Simple Security
H O O P RAC K Simple Security The Hoop Rack is a proven design that provides high security and easy bike parking. The Hoop Rack uses thick pipe construction and the full radius of the bend makes the Hoop
More informationSINGLE TURN COPAL ELECTRONICS S T T A Ω ( 1 2 ) FEATURES PART NUMBER DESIGNATION
SINGLE TURN INTERNAL STRUCTURE 7 6 5 4 9 8 FEATURES Lead-free soldering, Cadmium-free Top and side adjustment styles Rotor with a cross slot for ease of adjustment Leaded terminals provide strong as adhesive
More informationSECTION 19 FABRICATION
Section 19 SECTION 19 FABRICATION Look for this blue line in the left margin of the Design Manual documents. This line shows you where the latest update has been made. 19-1 GENERAL FABRICATION CONSIDERATIONS
More informationType PB Load Cell. Approvals OIML approval to C3 (Y = 7 500; Y = for 375 kg capacity)
Type PB Load Cell IP65 Product Description The type PB is a very low profile planar beam load cell. Its unique Flintec design allows for an extremely low scale construction. Using 3 or 4 type PB load cells
More informationS W E RV E RAC K. Simple Security. Simple Stability.
S W E RV E RAC K Simple Security. Simple Stability. The Swerve Rack is a proven design that provides high security and easy bike parking. The Swerve Rack uses thick pipe construction and the full radius
More informationFLEXIBLE POWER & GROUNDING. Braid Solutions
FLEXIBLE POWER & GROUNDING Braid Solutions Flexible Grounding and Power Options One of our signature products, BURNDY Braid Assemblies are an economical and efficient means of protecting electrical equipment
More informationTuf-Lite II Fans 3000H Series Hub
Tuf-Lite II Fans 3000H Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Fan Blades Hudson Tuf-Lite II (white, prev. Blue**) are made from fiberglass
More informationStrain Gauge Measurement A Tutorial
Application Note 078 Strain Gauge Measurement A Tutorial What is Strain? Strain is the amount of deformation of a body due to an applied force. More specifically, strain (ε) is defined as the fractional
More informationThe shield (screen) connecting system from WAGO offers high electrical and mechanical safety for very flexible applications.
The shield (screen) connecting system from WAGO offers high electrical and mechanical safety for very flexible applications. Shield (Screen) Connecting System VOLUME 1 Shield (screen) connecting system
More informationSECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationTuf-Lite II Fans 3000H Series Hub
Tuf-Lite II Fans 3000H Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Fan Blades Hudson Tuf-Lite II (white, prev. blue**) fan blades are made from
More informationNemalux INSTALLATION INSTRUCTIONS APPLICATION 1-4
I N D U S T R I A L rev. A- INSTALLATION INSTRUCTIONS *PENDING* E77827 E77827 APPLICATION MR3 & MR6 Luminaires are suitable for use in the following areas as defined by the National Electrical Code (NEC)
More informationProcesses for Flexible Electronic Systems
Processes for Flexible Electronic Systems Michael Feil Fraunhofer Institut feil@izm-m.fraunhofer.de Outline Introduction Single sheet versus reel-to-reel (R2R) Substrate materials R2R printing processes
More informationUmbrella Inserts and Stubby Screens
ADHESIVE ANCHORING SPECIALISTS Umbrella Inserts and High Performance Adhesive Systems for Fastening to Hollow Base Materials DESCRIPTION/ADVANTAGES Hollow Block Fastening with A7+ Adhesive Umbrella Inserts
More informationSection 914. JOINT AND WATERPROOFING MATERIALS
914.01 Section 914. JOINT AND WATERPROOFING MATERIALS 914.01. General Requirements. Joint and waterproofing material for use in concrete construction must meet the requirements of this section. 914.02.
More informationTuf-Lite II Fans 3000HC Series Hub
Tuf-Lite II Fans 3000HC Series Hub INSTALLATION MANUAL Hudson Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 8 through 10 Diameter Hudson Tuf-Lite II (White) are made from fiberglass reinforced vinyl-ester
More informationDissolved Oxygen Transmitter
Dissolved Oxygen Transmitter OBM-67H The OBM-67H is a -wire type (4VDC power supply) dissolved oxygen transmitter housed in a robust, die-cast aluminum enclosure suitable for installation out in the field.
More informationLAND AND CONDUCTOR REPAIR (DVD-97ABC)
This test consists of twenty multiple-choice questions. All questions are from the video: Land and Conductor Repair (DVD-97ABC). Each question has only one most correct answer. Circle the letter corresponding
More informationX-P High Performance Nail for Fastening to Concrete and Wood to Steel applications
X-P High Performance Nail for Fastening to Concrete and Wood to Steel applications Product data X-P_ MX Ø 8.2 2.4 X-P_ P8 Ø 8.2 2.4 Ø 4.0 L s L L s L Ø 4.0 Features and Benefits A specially hardened fastener
More informationabsolute optical encoder for Panasonic serial communications
L-9517-9460-05-B absolute optical encoder for Panasonic serial communications True absolute non-contact optical encoder system: no batteries required Wide set-up tolerances for quick and easy installation
More informationChapter 11 Testing, Assembly, and Packaging
Chapter 11 Testing, Assembly, and Packaging Professor Paul K. Chu Testing The finished wafer is put on a holder and aligned for testing under a microscope Each chip on the wafer is inspected by a multiple-point
More informationDESIGN OF MACHINE MEMBERS-I
Code No: R31035 R10 Set No: 1 JNT University Kakinada III B.Tech. I Semester Regular/Supplementary Examinations, Dec - 2014/Jan -2015 DESIGN OF MACHINE MEMBERS-I (Mechanical Engineering) Time: 3 Hours
More informationFASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S. Which FERO Tie Systems Require Fasteners?
FASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S Which FERO Tie Systems Require Fasteners? Structural Actions: Fastener,, or Both? With the exception of FERO tie systems that are directly
More informationOptical Kit Encoder Page 1 of 11. Description. Mechanical Drawing. Features
Description Page 1 of 11 The E3 is a high resolution rotary encoder with a molded polycarbonate enclosure, which utilizes either a 5-pin locking or standard connector. This optical incremental encoder
More information