ONLINE SUBMITTED TENDER INQUIRY

10 2 2,13,15,16,46 27, non-inductive ,26,

HANDS-ON RADIO PARTS LIST (Thanks, John AF4WM and Steve AD7KR) Updated through Experiment 129 Quantities assume all parts available for re-use MAX QTY EXPERIMENT NOTES 1/4 WATT RESISTOR (All values are

Ocean Controls KT-5221 Modbus IO Module

Ocean Controls Modbus IO Module 8 Relay Outputs 4 Opto-Isolated Inputs 2 Analog Inputs (10 bit) 1 PWM Output (10 bit) 4 Input Counters Connections via Pluggable Screw Terminals 0-5V or 0-20mA Analog Inputs,

Ocean Controls KT-5198 Dual Bidirectional DC Motor Speed Controller

Ocean Controls KT-5198 Dual Bidirectional DC Motor Speed Controller Microcontroller Based Controls 2 DC Motors 0-5V Analog, 1-2mS pulse or Serial Inputs for Motor Speed 10KHz, 1.25KHz or 156Hz selectable

555 Astable Kit MitchElectronics 2018

555 Astable Kit MitchElectronics 2018 www.mitchelectronics.co.uk CONTENTS Introduction 3 Schematic 3 How It Works 4 Materials 6 Construction 7 Important Information 8 Page 2 INTRODUCTION The 555 timer

Digital temperature controllers

Digital Temperature Controller Using Thermocouple sunil kumar Adeeb Raza Digital temperature controllers are essential for temperature measurement and control of instrumentation in industries. These are

Warm Tube Clock. Before we start, please make sure that you have all required parts that come for the main board :

Warm Tube Clock Assembly Instructions for the main board Introduction Congratulations on your purchase of OSH Nixie Tube Clock. In this document you will see all steps you need to follow in order to successfully

12V Dimmer Kit, version 2

12V Dimmer Kit, version 2 User Manual Description The 12V Dimmer Kit V2 is an especially efficient PWM (pulse-width modulation) controller for 12V loads up to 60 watts. It features a single dial control

Circuit Board Assembly Instructions

Circuit Board Assembly Instructions This document walk you through the assembly of the Base4 Clock v1.2 - v1.3 circuit boards. Important note for kit buyers The color and appearance of the components may

the elektor datasheet collection

the elektor datasheet collection LM117 LM136 LM137 L200 LM236 LM317 1,2...37 V/1,5 A Shunt regulator 2,5 V -1,2...-37 V/1,5 A 2,8...36 V/2 A Shunt regulator 2,5 V 1,2...37 V/1,5 A LM320LZ-12 Fixed voltage

LBI-38392C IC DATA MAINTENANCE MANUAL LOGIC BOARD U707 OCTAL DATA LATCH 19D902172G1 & G2 TABLE OF CONTENTS

LBI-38392C MAINTENANCE MANUAL LOGIC BOARD 19D902172G1 & G2 U707 OCTAL DATA LATCH IC DATA TABLE OF CONTENTS Page DESCRIPTION........................................... Front.. Cover CIRCUIT ANALYSIS........................................

University Visvesvaraya College of Engineering

University Visvesvaraya College of Engineering K.R.Circle, -560001 INVITATION FOR QUOTATION TEQIP-II/2013/KA2G01/Shopping/25 29-Nov-2013 To, Sub: Invitation for Quotations for supply of Goods Dear Sir,

Section II - 1. Major Component Schematics. - Amplifier/Power Supply - Volume Control - Crossover - Transformer - Audio Distribution Assy - Lighting

Section Major Component Schematics - Amplifier/Power Supply - Volume Control - Crossover - Transformer - Audio Distribution Assy - Lighting II - Digital Preamp PCB Assy, Digital Preamp (DSP # & Inputs),

6. HARDWARE PROTOTYPE AND EXPERIMENTAL RESULTS

6. HARDWARE PROTOTYPE AND EXPERIMENTAL RESULTS Laboratory based hardware prototype is developed for the z-source inverter based conversion set up in line with control system designed, simulated and discussed

1 REF PART NO DESCRIPTION REMARKS QTY

Page 1 REF PART NO DESCRIPTION REMARKS QTY 100 1033987 HOUSING ASSY., LOWER 1 102 1033832 COVER, SEALED, REAR 1 103 1033988 HOUSING ASSY., UPPER 1 104 B310204411 C.B.B. SCREW M3X10 12 105 1033813 CAP,

High Efficiency DC-DC Converter Module

Design Note DN05108/D High Efficiency DC-DC Converter Module Device Application Input Voltage Output Power Topology I/O Isolation NCP12700 Module 9 to 36 Vdc Up to 15 W Output Specification Output Voltage

Design & Implementation of PWM Based 3-Phase Switch-Mode Power Supply (SMPS)

Design & Implementation of PWM Based 3-Phase Switch-Mode Power Supply (SMPS) Abstract This research work is on designing a PWM based SMPS instead of using conventional pulse generating pre-programmed chips.

Control System Circuits with Opamps

Control System Circuits with Opamps 27.04.2009 Purpose To introduce opamps, transistors and their usage To apply a control system with analog circuit elements. Difference Amplifier Figure 1 Basic Difference

Calhoon MEBA Engineering School. Study Guide for Proficiency Testing Industrial Electronics

Calhoon MEBA Engineering School Study Guide for Proficiency Testing Industrial Electronics January 0. Which factors affect the end-to-end resistance of a metallic conductor?. A waveform shows three complete

ECE 454 Homework #1 Due 11/28/2018 This Wednesday In Lab

ECE 454 Homework #1 Due 11/28/2018 This Wednesday In Lab Design the Darlington push-pull amplifier specified in Lab 1: You will build this amplifier for Lab 1 so use parts that are available in the lab.

PROCUREMENT OF GOODS UNDER OPEN TENDER PROCEDURE

IFB NO. KGEC/DST-WB/EE /2018-19/995 PROCUREMENT OF GOODS UNDER OPEN TENDER PROCEDURE Kalyani Government Engineering College Kalyani 741 235; Nadia, West Bengal 1 Government of West Bengal Office of the

INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR , INDIA

INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR- 721302, INDIA No. IIT/ISE/RO WATER PURIFIER/2018-19/1 Date: 18.04.2018 Last date for submission: Friday, May 11,2018 at 3:00 PM Time &Date for Opening: Friday,

Description. Quick Start. Features. Ordering Information. Applications. or call

Description LED PAR IS31LT3932 is a universal LED driver, which can operate in fly-back, buck-boost and buck convertor. For isolation fly-back, it can achieve high PF, high current accuracy, ± 5 % load

Project: Electromagnetic Ring Launcher

Project: Electromagnetic Ring Launcher Introduction: In science museums and physics-classrooms an experiment is very commonly demonstrated called the Jumping Ring or Electromagnetic Ring Launcher. The

b b Fig. 1 Transistor symbols

TRANSISTORS Transistors have three terminals which are referred to as emitter (e), base (b) and collector (c). Fig 1 shows the symbols used for the two types of transistors in common use. c c b b e e npn

FEB User s Guide Power Factor Corrected 500W Off-Line Power Supply

FEB108-001 User s Guide Power Factor Corrected 500W Off-Line Power Supply Featured Fairchild Product: FAN4810 www.fairchildsemi.com/febsupport Contents 1. General Board Description...3 1.1 Contents of

Bill of Materials: PWM Stepper Motor Driver PART NO

PWM Stepper Motor Driver PART NO. 2183816 Control a stepper motor using this circuit and a servo PWM signal from an R/C controller, arduino, or microcontroller. Onboard circuitry limits winding current,

Assembly and User Guide

Assembly and User Guide AtariPunkr is an adjustable stepped tone generator. AtariPunkr provides hours of fun everyone! Powered by: 9V Battery Outputs: Mylar Speaker (Included) Stereo Output (3.5mm Jack)

M328 version ESR inductance capacitance meter multifunctional tester DIY

M328 version ESR inductance capacitance meter multifunctional tester DIY About transistor Multifunction Tester: The tester uses 3.7V rechargeable lithium battery (battery model: 14500) powered portable

Bitx Version 3 Linear Amplifier Assembly

Bitx Version 3 Linear Amplifier Assembly The power supply section has 2 options. 1 - AC input and a higher voltage on the IRF510 and +12 volts to the bitx. 2 - +12 volts applied to both the final and the

CW Modulator Using Pin Diodes

Wolfgang Schneider, DJ8ES CW Modulator Using Pin Diodes This article describes a CW modulator for radio applications which is simple and uncomplicated from the rf technology point of view. The call sign

A simple 10GHz power amplifier for beginners

RFMA7185-S1 1 Here follow six pages of an article focusing on RFMA7185 poweramplifier with kind permission of VHF Communications editorial office Franco Rota, I2FHW A simple 10GHz power amplifier for beginners

Workshop Part Identification Lecture N I A G A R A C O L L E G E T E C H N O L O G Y D E P T.

Workshop Part Identification Lecture N I A G A R A C O L L E G E T E C H N O L O G Y D E P T. Identifying Resistors Resistors can be either fixed or variable. The variable kind are called potentiometers

o What happens if S1 and S2 or S3 and S4 are closed simultaneously? o Perform Motor Control, H-Bridges LAB 2 H-Bridges with SPST Switches

Cornerstone Electronics Technology and Robotics II H-Bridges and Electronic Motor Control 4 Hour Class Administration: o Prayer o Debriefing Botball competition Four States of a DC Motor with Terminals

DRTXM2 TRANSMITTER BILL OF MATERIAL IDENT QTY PART NUMBER DESCRIPTION

DRTXM2 TRANSMITTER BILL OF MATERIAL H1 C1-5,7,10-11,15,17-18,20, 22-28,34,38, 43-46,49-53,1A,2A 8 Right Angle LED Mount 0 0.01uf 50V Ceramic Disc Capacitor 31 0.1 UF/50V Decoupling Capacitors C13,14,39-42

Rotary Relay Replacement. for the ICOM 720A KA6BFB

Rotary Relay Replacement for the ICOM 720A by KA6BFB BACKGROUND There are several modifications available for converting the Icom IC-720A rotary relay in the filter module to fixed relays. The most popular

Application Note AN-1075

Application Note AN-1075 Obtaining Low THD and high PF without A PFC By Cecilia Contenti and Peter Green Table of Contents Page I. Introduction...1 II. Test Results...1 III. Electrical Circuit...2 IV.

User Manual. CC1000DK Development Kit

User Manual Rev. 2.11 CC1000DK Development Kit SWRU058 Page 1 of 24 Table of contents: INTRODUCTION... 3 EVALUATION BOARD... 3 DESCRIPTION... 4 LAYOUT SKETCHES, ASSEMBLY DRAWINGS AND CIRCUIT DIAGRAM...

LM317T Variable Voltage Regulator

LM317T Variable Voltage Regulator The LM317T is a adjustable 3 terminal positive voltage regulator capable of supplying in excess of 1.5 amps over an output range of 1.25 to 37 volts. The device also has

EVAL6235N. Demonstration board for L6235 DMOS driver for 3-phase brushless DC motor. Description. Features

Demonstration board for L6235 DMOS driver for 3-phase brushless DC motor Description Data brief Features Operating supply voltage from 8 to 52 V 5.6 A output peak current (2.8 A DC) R DS(ON) 0.3 typ. value

Code No: R Set No. 1

Code No: R05310402 Set No. 1 1. (a) What are the parameters that are necessary to define the electrical characteristics of CMOS circuits? Mention the typical values of a CMOS NAND gate. (b) Design a CMOS

Figure 1. NCP5104 Evaluation Board

P50 6 W Ballast Evaluation Board User's Manual EVAL BOARD USER S MANUAL Introduction This document describes how the P50 driver can be implemented in a ballast application. The scope of this evaluation

CW-ADD. Universal CW Adapter for SSB Transceivers. Assembly manual. Last updated: October 1,

CW-ADD Universal CW Adapter for SSB Transceivers Assembly manual Last updated: October 1, 2017 ea3gcy@gmail.com Updates and news at: www.ea3gcy.com Thanks for building the Universal CW Adapter kit CW-ADD

Discrete Op-Amp Kit MitchElectronics 2019

Discrete Op-Amp Kit MitchElectronics 2019 www.mitchelectronics.co.uk CONTENTS Introduction 3 Schematic 4 How It Works 5 Materials 9 Construction 10 Important Information 11 Page 2 INTRODUCTION Even if

AN2103 APPLICATION NOTE VIPower: VIPer12A ISOLATED FLYBACK CONVERTER REFERENCE BOARD

AN203 APPLICATION NOTE VIPower: VIPer2A ISOLATED FLYBACK CONVERTER REFERENCE BOARD. ABSTRACT The presented circuit can be used to produce multiple isolated voltage outputs. It is dedicated to building

High Efficiency DC-DC Converter Module

Design Note DN05109/D High Efficiency DC-DC Converter Module Device Application Input Voltage Output Power Topology I/O Isolation NCP12700 Module 18 to 160 Vdc Up to 15 W DCM Flyback Isolated Output Specification

ATV Modulator User Manual

ATV Modulator User Manual FMTV Modulator by Grant ZL1WTT & Keith ZL1BQE 20 February 2004 Page 1 Display board layout The controller consists of a 2x 16 LCD display with three push buttons and a rotary

LBI-38858A. Mobile Communications SERIAL PROGRAMMING KIT TQ3370. Maintenance Manual 1

LBI-38858A Mobile Communications SERIAL PROGRAMMING KIT TQ3370 Maintenance Manual 1 TABLE OF CONTENTS DESCRIPTION.............................. 1 OUTLINE DIAGRAMS TQ3370 Assembly............................

HT-1A Dual Band CW QRP Transceiver. Kit Building Instructions

HT-A Dual Band CW QRP Transceiver Kit Building Instructions Rev B, July 8, 08 Designed by BD4RG Exclusively distributed by CRKITS.COM and its worldwide distributors Join the group http://groups.io/g/crkits

INVITATION FOR QUOTATION. TEQIP-II/2015/UP1G01/Shopping/60

INVITATION FOR QUOTATION TEQIP-II/2015/UP1G01/Shopping/60 24-Jul-2015 Sub: Invitation for Quotations for supply of Goods Dear Sir, 1. You are invited to submit your most competitive quotation for the following

QUOTATION. Procurement of Equipments for Physics Laboratory

Notification No.: NITPY/PHY/LAB/Q-0/014-15 31.1.014 QUOTATION Procurement of Equipments for Physics Laboratory National Institute of Technology Puducherry invites sealed quotations from the reputed vendors/manufacturers

ASSEMBLY and OPERATION MANUAL

ASSEMBLY and OPERATION MANUAL TTL NIXIE Digital Clock Rev. 2 January 19, 2011 TABLE OF CONTENTS Introduction 3 Design Objective 3 Theory of Operation 3 Assembly tips 4 Required tools 4 Inspection 4 Before

PROCUREMENT OF SERVO CONTROLLED VOLTAGE STABILIZER FOR STPI-NASIK

PROCUREMENT OF SERVO CONTROLLED VOLTAGE STABILIZER FOR STPI-NASIK Sealed quotations are invited under Two-Bid system from reputed agencies, either by themselves or as a joint venture/consortium/partnership

Construction Manual 4m-Linear-Transverter XV4-15

Construction Manual 4m-Linear-Transverter XV4-15 Holger Eckardt DF2FQ Kirchstockacherstr. 33 D-85662 Hohenbrunn 3207 Technical data exciter frequency: 21.0... 21.5 MHz RF frequency: 70.0.. 70.5 MHz supply

UNIVERSITY OF ENGINEERING AND TECHNOLOGY, TAXILA (PROCUREMENT CELL)

UNIVERSITY OF ENGINEERING AND TECHNOLOGY, TAXILA (PROCUREMENT CELL) SCHEDULE OF REQUIREMENTS FOR PURCHASE OF PURCHASE OF FURNITURE FOR VARIOUS OFFICES The delivery of services and supply will be made in

V-TUNE. Variable capacitance mini-circuit with Varactor diode and potentiometer control. Assembly manual. Last updated: July 15, 2017

V-TUNE Variable capacitance mini-circuit with Varactor diode and potentiometer control Assembly manual Last updated: July 15, 2017 ea3gcy@gmail.com Updates and news at: www.ea3gcy.com Thanks for building

POWER AMPLIFIER SERVICE MANUAL CONTENTS

POWER LIFIER CONTENTS Performance Specifications... 2 Notes... 2 Rear Panel... 3 Section Location... 4 Block Diagram... 5-6 Interconnection Diagram... 7-8 Input PCB and Schematic... 9-10 Main PCB and Schematic...

Semiconductors, ICs and Digital Fundamentals

Semiconductors, ICs and Digital Fundamentals The Diode The semiconductor phenomena. Diode performance with ac and dc currents. Diode types: General purpose LED Zener The Diode The semiconductor phenomena

TA2022 Audio Amplifier Module v1.0

TA2022 Audio Amplifier Module v1.0 TA2022 Audio Amplifier Module is a Class T Stereo Audio Amplifier based on TA2022 digital audio power amplifier made by formerly Tripath Company. The design of this board

Low Voltage, High Current Time Delay Circuit

Low Voltage, High Current Time Delay Circuit In this circuit a LM339 quad voltage comparator is used to generate a time delay and control a high current output at low voltage. Approximatey 5 amps of current

NATIONAL POWER TRAINING INSTITUTE (WR) (Ministry of Power, Govt. of India) NAGPUR TENDER DOCUMENT SUPPLY OF DRAWING TABLES AND STOOLS

NATIONAL POWER TRAINING INSTITUTE (WR) (Ministry of Power, Govt. of India) NAGPUR-440022 TENDER DOCUMENT SUPPLY OF DRAWING TABLES AND STOOLS At NPTI (WR), NAGPUR, MAHARASHTRA 1 NATIONAL POWER TRAINING

Geiger Counter Kit Assembly Instructions ( )

Geiger Counter Kit Assembly Instructions (2012-05-11) To build this kit, you should know how to solder. And it will be much easier if you have made other kits before. But even if this is your first kit,

TKEY-1. CW touch key. (no electromechanical contacts) Assembly manual. Last update: May 1,

TKEY-1 CW touch key (no electromechanical contacts) Assembly manual Last update: May 1, 2016 ea3gcy@gmail.com Updates and news at: www.qsl.net/ea3gcy Thanks for constructing the TKEY-1A CW touch key Have

AN2001 Application note

Application note VIPower : the VIPer53-E single output reference board with 90 to 264 Vac input, 24 W output Introduction The VIPer53-E combines an enhanced current mode PWM controller with a high voltage

Isolated LED Driver Demo Board

Isolated LED Driver Demo Board Input 180..260VAC, Output 0.35A, 90..120V (42W max.) General Description The AN9961DB9 demo board is the offline isolated LED driver, using AN9961 IC. The AN9961 provides

Electrical, Electronic and Communications Engineering Technology/Technician CIP Task Grid

Secondary Task List 100 SAFETY 101 Describe OSHA safety regulations. 102 Identify, select, and demonstrate proper hand tool use for electronics work. 103 Recognize the types and usages of fire extinguishers.

Power Charge Pump and Low Drop Voltage Regulator TLE 4307

Power Charge Pump and Low Drop Voltage Regulator TLE 4307 Power Charge Pump Circuit Features High Current Capability Short Circuit Protection Overtemperature Protection Active Zener Circuit Very Low Drop

ericssonz MAINTENANCE MANUAL ORION BUFFER BOARD ROA SPECIFICATIONS TABLE OF CONTENTS

MAINTENANCE MANUAL ORION BUFFER BOARD ROA 117 2280 TABLE OF CONTENTS Page SPECIFICATIONS............................................... Front cover DESCRIPTION.................................................

www MK-Electronic de EPSON FX2170 Page 1 of 16

Page 1 of 16 REF. PART.NO. DESCRIPTION QTY STANDARD 100 1025018 HOUSING ASSY. LOWER 1 101 1025039 EDGE GUIDE ASSY. FRONT 1 102 1025041 HOUSING UPPER 1 103 1025027 COVER PRINTER REAR 1 104 1025024 COVER

DEPARTMENT OF ECOLOGY, ENVIRONMENT AND REMOTE SENSING

TEL/FAX: 0191-2474553 Government of Jammu and Kashmir DEPARTMENT OF ECOLOGY, ENVIRONMENT AND REMOTE SENSING Paryavaran Bhawan, Transport Nagar, Gladeni, Jammu-180006 Website: www.jkdears.com email: dirjkers@gmail.com

Dimmable LED Driver with iw3614. (Input 230Vac Output 24V350mA)

Dimmable LED Driver with iw3614 (Input 230Vac Output 24V350mA) 1. Design Purpose and Feature Isolated ac-dc offline, Input 230Vac, Output 7 LEDs 350mA Intelligent wall dimmer detections - Leading-edge

VLA Hybrid Gate Driver Application Information. DC-DC Converter V D 15V. V iso = 2500V RMS

Application NOTES: Last Revision November 15, 2004 VLA500-01 Hybrid Gate Driver Application Information Contents: 1. General Description 2. Short Circuit Protection 2.1 Destaruation Detection 2.2 VLA500-01

Amplifier, Product Design

Amplifier, Product Design Choose one component from the amplifier circuit and investigate technical, theory and mathematical information related to your chosen component. This work will be completed over

Design and development of photodynamic therapy laser system

International Research Journal of Electrical and Electronics Engineering Vol. 2(1), pp. 007-017, December, 2015. www.premierpublishers.org, ISSN: 2375-0499x IRJEEE Review Design and development of photodynamic

Appendix C, Paper 3 C-17

Appendix C, Paper 3 C-17 C-18 C-19 C-20 C-21 C-22 C-23 C-24 C-25 C-26 Appendix D USER S MANUAL SEMITEACH Based Converter System for Electrical Machines Jawwad Zafar Copyright 2010 by the Université Libre

List of Items Available in the Laboratory the Lab

List of Items Available in the Laboratory the Lab Category Component 555 Timer $0.30 5V Relay $3.50 74xxx Series IC Chip $0.30 Battery - 12V (rechargeable Lead-acid type) $16.00 Battery - 6V (rechargeable

LM193/LM293/LM393/LM2903 Low Power Low Offset Voltage Dual Comparators

Low Power Low Offset Voltage Dual Comparators General Description The LM193 series consists of two independent precision voltage comparators with an offset voltage specification as low as 2.0 mv max for

Electronic Components

Electronic Components Arduino Uno Arduino Uno is a microcontroller (a simple computer), it has no way to interact. Building circuits and interface is necessary. Battery Snap Battery Snap is used to connect

Gibson Goldtone SERVICE MANUAL NO. GG0007 ISSUE 1

Gibson Goldtone SERVICE MANUAL NO. GG0007 ISSUE 1 Date: December 21 st 2000 Product Code : G-05 Model No : Gibson Super Gold Tone 60RV Issued by: Trace Elliot Limited. Blackwater Trading Estate The Causeway,

ILD2035. MR16 3 W Control Board with ILD2035. Application Note AN214. Industrial and Multimarket. Revision: 1.0 Date:

ILD2035 MR16 3 W Control Board with ILD2035 Application Note AN214 Revision: 1.0 Date: Industrial and Multimarket Edition Published by Infineon Technologies AG 81726 Munich, Germany 2011 Infineon Technologies

PART. Maxim Integrated Products 1

9-887; Rev 0; 2/00 MAX669 Evaluation System General Description The MAX669 evaluation system consists of a MAX669 evaluation kit (EV kit) and a companion Maxim SMBus interface board. The MAX669 EV kit

PRICE $2.00 MODEL PA500M* AMPLIFIER SERVICE MANUAL

PRICE $2.00 MODEL PA500M* AMPLIFIER SERVICE MANUAL SECTION I GENERAL DESCRIPTION The standard operating functions of this siren are Wail, Tap II, Yelp and manual peak-and-hold. The Tap II feature allows

Maintenance Manual ERICSSONZ LBI-31552E

E Maintenance Manual TONE REMOTE CONTROL BOARD 19A704686P4 (1-Frequency Transmit Receive with Channel Guard) 19A704686P6 (4-Frequency Transmit Receive with Channel Guard) ERICSSONZ Ericsson Inc. Private

Construction Manual 6m-Linear-Transverter XV6/10

Construction Manual 6m-Linear-Transverter XV6/10 Holger Eckardt DF2FQ Kirchstockacherstr. 33 D-85662 Hohenbrunn 2606 Technical data exciter frequency: 28... 30 MHz RF frequency: 50... 52 MHz supply voltage:

MAINTENANCE MANUAL MHz, 100 WATT POWER AMPLIFIER 19D901841G3

MAINTENANCE MANUAL 851-870 MHz, 100 WATT POWER AMPLIFIER 19D901841G3 TABLE OF CONTENTS SPECIFICATIONS............................................... Front Cover DESCRIPTION.................................................

The ROSE 80 CW Transceiver (Part 1 of 3)

Build a 5 watt, 80 meter QRP CW Transceiver!!! Page 1 of 10 The ROSE 80 CW Transceiver (Part 1 of 3) Build a 5 watt, 80 meter QRP CW Transceiver!!! (Designed by N1HFX) A great deal of interest has been

LM158/LM258/LM358/LM2904 Low Power Dual Operational Amplifiers

LM158/LM258/LM358/LM2904 Low Power Dual Operational Amplifiers General Description The LM158 series consists of two independent, high gain, internally frequency compensated operational amplifiers which

Connecting a Neuron 5000 Processor to an External Transceiver

@ Connecting a Neuron 5000 Processor to an External Transceiver March 00 LonWorks Engineering Bulletin The Echelon Neuron 5000 Processor provides a media-independent communications port that can be configured

Supertex inc. HV9861ADB2

HV986A LED Driver Demoboard Boost Assisted, Valley Fill, 0VAC Input, 7W Output, 50mA, 0V, Power Factor ~ 9% General Description Certain target markets for LED lighting require a power factor of at least

Supertex inc. DN-H06. 14W Off-line LED Driver, 120VAC, PFC, 14V, 1.0A Load. Design Note. Specifications. Miscellaneous Notes

14W Off-line LED Driver, 120VAC, PFC, 14V, 1.0A Load Design Note Specifications Parameter AC line voltage LED (string) voltage Value 100-135VAC 0-14V LED current 1.0A Switching frequency 70-120kHz Efficiency

PS2-SMC-06 Servo Motor Controller Interface

PS2-SMC-06 Servo Motor Controller Interface PS2-SMC-06 Full Board Version PS2 (Playstation 2 Controller/ Dual Shock 2) Servo Motor Controller handles 6 servos. Connect 1 to 6 Servos to Servo Ports and

DIGITAL / ANALOG TRAINER

DIGITAL / ANALOG TRAINER MODEL XK-150 A COMPLETE MINI-LAB FOR BUILDING, TESTING AND PROTOTYPING ANALOG AND DIGITAL CIRCUITS Instruction Manual ELENCO Copyright 2016, 1998 by ELENCO Electronics, Inc. All

Meter Bus Application ANALOG-BOARD Revision 5.1

Meter Bus Application ANALOG-BOARD Revision 5.1 November 1995 Revision 5.1 Dear Customer, Texas Instruments would like to thank you for your request for the ANALOG BOARD Revision 5.1 design kits. The following

print close Basic Comparison of NE555 and LM386

print close Electronic Design Petre Petrov Fri, 2015-03-06 10:27 The bipolar NE555 timer IC is widely used in inductorless dc-dc converters, most frequently in doubling and inverting converters. However,

Electricity and Electronics Training System - Module 1 and 2

Electricity and Electronics Training System - Module 1 and 2 LabVolt Series Datasheet Festo Didactic en 03/2018 Table of Contents General Description 2 List of Manuals 2 Table of Contents of the Manual(s)

I.R.T. ELECTRONICS PTY LTD 6 Hotham Parade, ARTARMON, N.S.W. 064 Australia Phone: (ISO Code 6) (0) 4393744 Fax: (0) 439 7439 Telex: AA30 AA-89 0x AUDIO SWITCHER 805-08-985 DESIGNED AND MANUFACTURED IN

MAINTENANCE MANUAL MHz, 100 WATT POWER AMPLIFIER 19D901841G3

A MAINTENANCE MANUAL 851-870 MHz, 100 WATT POWER AMPLIFIER 19D901841G3 TABLE OF CONTENTS SPECIFICATIONS............................................... Front Cover DESCRIPTION.................................................

02/11/2015

Modem communication plug and play solutions GSM Part number 88970119 For remote control of your application Automatic notification of alarms via SMS (GSM Modem) / email or on a PC with M3 ALARM software.

BU80 BU80E HTS-10 POWERED SUBWOOFER SERVICE MANUAL

BU80 BU80E HTS-10 POWERED SUBWOOFER SERVICE MANUAL Infinity Systems, Inc. 250 Crossways Park Dr. Woodbury, New York 11797 Rev H 11/2001 BU-80/BU80E/HTS-10 SAFETY INFORMATION/VERSION DIFFERENCES Warning

Group Sub Group Part Namber Description Qty. Picture. DIODE DI-AXIAL 1K426A=1N60 GERMANUM DIODE,BULK,AXIAL,BAG:200x,BOX:5K,UNIZONE 1,101,646

Group Sub Group Part Namber Description Qty. Picture DIODE DI-AXIAL 1K426A=1N60 GERMANUM DIODE,BULK,AXIAL,BAG:200x,BOX:5K,UNIZONE 1,101,646 VARISTOR D-07 PSR-25572-270VDC-175VAC- 7MM VDR,270VDC,175VAC,TYCO,BULK,DC:10,BAG:1K

ENGINEERING. Unit 5 Electrical and electronic design Suite. Cambridge TECHNICALS LEVEL 3

2016 Suite Cambridge TECHNICALS LEVEL 3 ENGINEERING Unit 5 Electrical and electronic design Y/506/7271 Guided learning hours: 60 VERSION 4 - June 2017 black line indicates updated content ocr.org.uk/engineering