Switching. Radar. Overview 114 VEGAMIP series Mounting adapter 120

Transcription

1 Switching Radar Overview 114 VEGAMIP series Mounting adapter

2 VEGAMIP Level detection in bulk solids and liquids Measuring principle The measuring system consists of a microwave emitter and a respective receiver. The emitting signal is focussed by an antenna system and emitted against the receiver. A medium in the path of rays damps this signal. This signal damping is detected by the receiver and converted into a switching signal. The adaptation to the local conditions and the medium is easily possible by adjusting the sensitivity. Because microwaves can penetrate non-conductive products, a measurement through plastic vessels is possible. With metal vessels, mounting is carried out directly on the vessel or through suitable window materials such as for example plastic, glass or ceramic. Applications in bulk solids The main application area of the microwave barrier is the level detection of bulk solids. The non-contact measuring principle is particularly suitable for harsh application conditions in mineral ore mining, coal or ore dressing. Due to the rugged sensor design and the use of suitable window materials, the use with very abrasive products or high temperature is possible. Different sensor and antenna versions enable a simple adaptation to various applications. Applications in liquids The microwave barrier is particularly suitable for measurement of liquids in plastic or glass vessels because no opening is required for mounting. The measurement can be carried out directly through the vessel wall. In metallic vessels, the sensor is mounted on a threaded socket. Applications for object monitoring Similar to a light barrier, the microwave barrier can be also used for object monitoring. Since microwaves are not influenced by dust, rain or fog, this measuring system is ideal for harsh operating conditions and offers high reliability even in case of rain, snow or strong dust generation. Typical applications are loading of trucks in the quarry or collision protection of crane systems. Due to the high dynamic range of the receiver, an effective radius of more than 100 m can be reached. 114 Radar VEGAMIP

3 Overview VEGAMIP T61 VEGAMIP R61 Application Bulk solids, liquids Bulk solids, liquids Version Microwave emitter Microwave receiver Measuring range Up to 100 m Up to 100 m Process fitting Thread G1½, 1½ NPT Flanges Clamp Process temperature C +450 C with mounting adapter Process pressure bar ( kpa) Thread G1½, 1½ NPT Flanges Clamp C +450 C with mounting adapter bar ( kpa) Switching Radar VEGAMIP 115

4 VEGAMIP T61 Microwave emitter for level detection of bulk solids and liquids Application area The VEGAMIP T61 is the emitting unit of the microwave barrier for level detection of bulk solids and liquids. Typical applications are the detection of bulk solids in silos, bunkers and crushers as well as of liquids in tubes and vessels. The non-contact measuring principle has no direct contact to the medium and enables wear and maintenance-free permanent operation. Advantages Reliable measurement even with very abrasive products Simple adjustment saves time and costs for setup Reliable measurement even with changing product features Technical data Measuring range: up to 100 m Process fitting: thread G1½, 1½ NPT flanges Clamp Process temperature: C +450 C with mounting adapter Process pressure: bar ( kpa) mm / 300 mm (6.69") / (11.81") 1 Version with thread G1½ 2 Version with plastic horn antenna 3 Mounting strap 4 Adapter flange SW 46 mm (1.81") SW 60 mm (2.36") G1 ½ 1 22 mm (0.87") 83 mm (3.27") 4 19 mm (0.75") 98 mm (3.86") ø 75 mm (2.95") ø 115 mm (4.53") 2 15 mm (0.59") 116 Radar VEGAMIP T61

5 Approval XX without... GX FM Cl. II, III Div1 (DIP)... GX CSA Cl. II, III Div1 (DIP)... Version / Material A with horn antenna ø1½" / 316L with PTFE cover... B with horn antenna ø40 mm / 316L... C with horn antenna ø48 mm / 316L... D with horn antenna ø75 mm / 316L... F with plastic horn antenna ø80mm / PP... Process fitting / Material NA Thread 1½NPT (ASME B1.20.1) PN4 / 316L... XC Mounting strap 170mm / 316L... XD Mounting strap 300mm / 316L... AE Flange 2" 150lb RF, ANSI B16.5 / 316L... AK Flange 4" 150lb RF, ANSI B16.5 / 316L... AM Flange 6" 150lb RF, ANSI B16.5 / 316L... AO Flange 6" 300lb RF, ANSI B16.5 / 316L... AN Flange 8" 150lb RF, ANSI B16.5 / 316L... AP Flange 10" 150lb RF, ANSI B16.5 / 316L... Seal / Process temperature 1 FKM (A+P FPM ) / C... 2 FKM (SHS FPM 70C3 GLT) / C... 3 FFKM (Kalrez 6375) / C... Electronics T Voltage supply VDC / VAC... Housing / Protection K Plastic / IP66/IP67... A Aluminium / IP66/IP68 (0.2bar)... V Stainless steel (pre.casting) 316L / IP66/IP68 (0.2bar)... 8 Stainless steel (electropol.) 316L / IP66/IP68 (0.2bar)... Cable entry / Cable gland / Plug connection N ½NPT / without / without... Additional equipment X without... Switching MPT61. Radar VEGAMIP T61 117

6 VEGAMIP R61 Microwave receiver for level detection of bulk solids and liquids Application area The VEGAMIP R61 is the receiving unit of the microwave barrier for level detection of bulk solids and liquids. Typical applications are the detection of bulk solids in silos, bunkers and crushers as well as of liquids in tubes and vessels. The non-contact measuring principle has no direct contact to the medium and enables wear and maintenance-free permanent operation. Advantages Reliable measurement even with very abrasive products Simple adjustment saves time and costs for setup Reliable measurement even with changing product features Technical data Measuring range: up to 100 m Process fitting: thread G1½, 1½ NPT flanges Clamp Process temperature: C +450 C with mounting adapter Process pressure: bar ( kpa) mm / 300 mm (6.69") / (11.81") 1 Version with thread G1½ 2 Version with plastic honr antenna 3 Mounting strap 4 Adapter flange SW 46 mm (1.81") SW 60 mm (2.36") G1 ½ 1 22 mm (0.87") 83 mm (3.27") 4 19 mm (0.75") 98 mm (3.86") ø 75 mm (2.95") ø 115 mm (4.53") 2 15 mm (0.59") 118 Radar VEGAMIP R61

7 Approval XX without... GX FM Cl. II, III Div1 (DIP)... GX CSA Cl. II, III Div1 (DIP)... Version / Material A with horn antenna ø1½" / 316L with PTFE cover... B with horn antenna ø40 mm / 316L... C with horn antenna ø48 mm / 316L... D with horn antenna ø75 mm / 316L... F with plastic horn antenna ø80mm / PP... Process fitting / Material NA Thread 1½NPT (ASME B1.20.1) PN4 / 316L... XC Mounting strap 170mm / 316L... XD Mounting strap 300mm / 316L... AE Flange 2" 150lb RF, ANSI B16.5 / 316L... AK Flange 4" 150lb RF, ANSI B16.5 / 316L... AM Flange 6" 150lb RF, ANSI B16.5 / 316L... AO Flange 6" 300lb RF, ANSI B16.5 / 316L... AN Flange 8" 150lb RF, ANSI B16.5 / 316L... AP Flange 10" 150lb RF, ANSI B16.5 / 316L... Seal / Process temperature 1 FKM (A+P FPM ) / C... 2 FKM (SHS FPM 70C3 GLT) / C... 3 FFKM (Kalrez 6375) / C... Electronics R Relay (DPDT) VDC / VAC(3A)... T Transistor (NPN/PNP) VDC... Housing / Protection K Plastic / IP66/IP67... A Aluminium / IP66/IP68 (0.2bar)... V Stainless steel (pre.casting) 316L / IP66/IP68 (0.2bar)... 8 Stainless steel (electropol.) 316L / IP66/IP68 (0.2bar)... Cable entry / Cable gland / Plug connection N ½NPT / without / without... Additional equipment X without... Switching MPR61. Radar VEGAMIP R61 119

8 Mounting adapter VEGAMIP Adapter for mounting of a VEGAMIP T61/R61 at high temperatures and/or abrasive products Application area The adapter is used for mounting of VEGAMIP 61 in bulk solids applications with high product temperatures and/or very abrasive products. The very robust design is particularly suitable for arduous operating conditions in the mining of minerals, the coal and ore processing and the production of metals. The massive process separation of Aluminium oxide ceramic ensures a very high lifetime also in continuous operation even with very abrasive products. Advantages Simple and quick mounting through compact process fitting Wear and maintenance-free operation through high resistance process separation of Aluminium oxide ceramic Technical data Process fitting: thread G2, 2 NPT Process temperature: C/450 C Version / Temperature range XC 2NPT adapter length150 mm / C... XD 2NPT adapter length 300 mm / C... MONTZUB-MIP. 24 mm (0.95") x Length 150 mm for 250 C x Length 300 mm for 450 C G2 61 mm (2.4") x 120 Radar Mounting Adapter