UNISONIC TECHNOLOGIES CO., LTD

Transcription

1 UNISONIC TECHNOLOGIES CO., LTD PNP PLANAR SILICON TRANSISTOR FEATURES SOT-89 * Low collector-to-emitter saturation voltage: V CE(SAT) =-0.4V max/i C =-A, I B =-0.A TO- TO-6 ORDERING INFORMATION Ordering Number Pin Assignment Package Lead Free Halogen Free Packing L-x-AB-R G-x-AB-R SOT-89 B C E Tape Reel L-x-T60-K G-x-T60-K TO-6 B C E Bulk L-x-TM-T G-x-TM-T TO- B C E Tube of Copyright 0 Unisonic Technologies Co., Ltd

2 ABSOLUTE MAXIMUM RATINGS (T A = ) PARAMETER SYMBOL RATINGS UNIT Collector to Base Voltage V CBO -60 V Collector to Emitter Voltage V CEO -0 V Emitter to Base Voltage V EBO -6 V Collector Current I C - A Collector Current (Pulse) I CP -9 A Collector Dissipation SOT P C TO-6/ TO- W Junction Temperature T J +0 Storage Temperature T STG -40 ~ +0 Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (T A = ) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Collector-to-Base Breakdown Voltage BV CBO I C =-ma, I E =0-60 V Collector-to-Emitter Breakdown Voltage BV CEO I C =-ma, R BE = -0 V Emitter-to-Base Breakdown Voltage BV EBO I C =0, I E =-ma -6 V Collector Cut-Off Current I CBO V CB =-40V, I E =0-0. ma Emitter Cut-Off Current I EBO V EB =-4V, I C =0-0. ma DC Current Gain h FE V CE =-V, I C =-A 0 60 h FE V CE =-V, I C =-A 0 Gain Bandwidth Product f T V CE =-V, I C =-A 0 MHZ Output Capacitance C OB V CB =-0V, f=mhz 00 pf Collector-to-Emitter Saturation Voltage V CE(SAT) I C =-A, I B =-0.A -0.4 V Turn-ON Time t ON See specified test circuit 0. μs Storage Time t STG See specified test circuit.4 μs Fall Time t F See specified test circuit 0. μs CLASSIFICATION of h FE RANK Q R S RANGE UNISONIC TECHNOLOGIES CO., LTD of

3 SWITCHING TIME TEST CIRCUIT UNISONIC TECHNOLOGIES CO., LTD of

4 TYPICAL CHARACTERISTICS Collector Current, -IC (A) -00mA -400mA -0mA 00mA -0mA Collector Current, -IC (A) -0 DC Current Gain, hfe Collector-Emitter Saturation Voltage, -VCE (SAT) (V) Collector-Emitter Saturation Voltage vs. Collector Current I C /I B = Base-Emitter Saturation Voltage vs. Collector Current I C /I B =0 I C /I B = UNISONIC TECHNOLOGIES CO., LTD 4 of

5 TYPICAL CHARACTERISTICS(Cont.) Collector Current, -IC (A) I CP I C ASO 00ms (Single pulse with regard to ~ 00ms) ms 0ms DC Operation Collector-to-Emitter Voltage, -V CE (V) Transition frequency, ft (MHz) Transition Frequency vs. Collector Current 0000 V CE =-V 000 f=mhz T C = UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD of