SEALED, ILLUMINATED ROCKER SWITCHES
|
|
- Roger Heath
- 5 years ago
- Views:
Transcription
1 K/K LOW OST, ROKER FOR WET & DUSTY ENVIRONMENTS The K series rockers are rugged, high performance sealed switches designed for use under severe conditions found in marine, appliance, heavy equipment and industrial control applications. The K and K series are sealed to IP68S and IP69K and panel sealed with an optional panel gasket. The K series is offered in single pole configuration and the K series is available in both single and double pole configurations. Both series offer illuminated models. Illumination can be independent or dependent of the switch position or a combination of both. A choice of red, green, clear or amber colored lenses are offered in illuminated models. Illumination options include incandescent, LED or neon light sources. Mounting is simple and quick; snaps into panel from the front. The OTTO snap-in design supports a variety of panel thicknesses with just one cutout size. A choice of models are offered to handle high power levels and logic level electronic switching applications. ustom colors are available upon request. Value-added assemblies with wire leads are also available. Please contact our factory for assistance. Features: Sealed to IP68S and IP69K Fits industry standard panel openings for drop-in replacement of panel sealed & unsealed switches Snap-in feature accommodates a wide range of panel cutouts UV & solvent resistant Withstands extreme shock & vibration ustom legends available & -position, momentary & maintained action Incandescent, LED & neon illumination with independent & dependent light source options UL recognized & SA certified Ignition protected Optional one-piece connector Optional panel gasket available RoHS compliant Standard haracteristics/ratings: ELETRIAL RATINGS: Load Sea Level Sea Level 5/50 VA, 60/00Hz Resistive 6A 5A 5,000 Resistive 0A N/A 50,000 Inductive 7A A 5,000 DWV Logic Level Electrical Life: ING: Light Source Incandescent Neon LED Mechanical Life: Seal: 000Vrms except across light terminals 5VD, max D.. logic level ratings (void if logic level load(s) exceeded at any time) See Rating hart Rating (see appendix for complete voltage/current ratings table) (VD) 6V, V, V (VA) 5V, 50V (VD) V, 6V, V, V 00,000 cycles IP68S and IP69K Operating Temp Range: -0 to +85 MATERIALS: ase: Button: Base: Terminals/ontact: Terminal Hardware: Mounting Hardware: Thermoplastic Thermoplastic Thermoplastic Brass, silver alloy with silver plate, gold flash for logic level Screws and lockwashers provided when applicable K/K series recommended Quick onnect terminals: AMP 605- for -6 AWG AMP 00- for -8 AWG None provided K Series Single Pole K Series Single & Double Pole US ROKER SWITHES Specifications Subject To hange Without Notice 9
2 K LOW OST, ROKER FOR WET & DUSTY ENVIRONMENTS K PART NUMBER ODE Part Number ode ontinued Below K X X X X Terminal Style/ Switch Rating A. Q../Std. B. Screw/Std.. Solder/Std. D. Q../Logic Level E. Screw/Logic Level F. Solder/Logic Level G. P Pin/Std. H. P Pin/Logic Level Actuator olor/style A. Red/Rocker B. Black/Rocker. White/Rocker D. Red/Paddle E. Black/Paddle F. White/Paddle G. Red/Rocker Pinned H. Black/Rocker Pinned J. White/Rocker Pinned K. Red/Short Paddle Pinned L. Black/Short Paddle Pinned M. White/Short Paddle Pinned N. Red/Standard Paddle Pinned P. Black/Standard Paddle Pinned R. White/Standard Paddle Pinned T. Red/Short Paddle U. Black/Short Paddle V. White/Short Paddle Switch Action/ircuit Position Position Position ircuit A B A. - NONE OFF SPST B. - NONE - SPDT. (-) NONE OFF SPST D. (-) NONE - SPDT E. (-) OFF (-) SPDT F. - OFF - SPDT G. (-) OFF - SPDT H. OFF NONE - SPST NOTE: ( ) denotes momentary action. Position A Position B Position Light Type* A. No Light B. 6V Incandescent. V Incandescent D. V Incandescent E. 5VA Neon F. 50VA Neon G. V Red LED H. V Green LED J. V Amber LED K. 6V Red LED L. 6V Green LED M. 6V Amber LED N. V Red LED P. V Green LED Q. V Amber LED R. V Red LED S. V Green LED T. V Amber LED K PART NUMBER ODE ONTINUED FROM ABOVE K ontinued X X X X *See appendix for complete voltage/ratings table Lens olor Position A Position A. No Lens A. No Lens B. Red B. Red. Green. Green D. Amber D. Amber E. lear E. lear Light/ircuit Location A. No Light B. F. ON in position A Wired to terms &. ON in position A Wired to terms & ON in position Wired to terms & Legend & Orientation A. None B.. D. E. ON in position Wired to terms & G. F. G. NOTES: No momentary switches with dependent lights. Neon lamps only to be coded with clear or amber lenses. LED lenses must be clear or same color as LED. No dependent light in OFF position. All legends printed on actuators without lens(es) will be white except actuator codes, F, J, M & R. All legends printed on lenses will be white except on clear lens(es) will be black. K panel plugs available as shown in Panel Plugs (PP) section. D. at position A E. at position D = I = ON in position A Wired to terms & ON in position at position A ON in position Wired to terms & NOTES: LED anode (+) terminal number shown in bold. Light on OFF side must be independent. ontact factory for multiple light types in the same switch. H. H. J. K. L. M. N. P. R. 9 OTTO Full Line atalog Specifications Subject To hange Without Notice
3 K LOW OST, ROKER FOR WET & DUSTY ENVIRONMENTS POSITION A POSITION PANEL THIKNESS AND MOUNTING OPENING GUIDELINES: PANEL THIKNESS RANGE OF (GASKET REOMMENDED) PANEL THIKNESS RANGE OF (GASKET NOT REQUIRED).5.07 PANEL UT-OUT (REFERENE) K ONNETOR PART NUMBER ODE XX XXXX (.08) K ONNETOR onnector olor 0. Red 0. Black 0. Orange* 0. Yellow* 05. Green* 06. Blue* 07. Violet* 08. Gray* 09. White * ontact Factory Packaging Quantity Pcs per Package Pcs per Package Pcs per Package (.0) (.00) K onnector P/N 050 ROKER SWITHES (.59) Specifications Subject To hange Without Notice 95
4 K LOW OST, ROKER FOR WET & DUSTY ENVIRONMENTS K A _A_ K B _A_ K A_ K D _A_ K E _A_ K F _A_ K G _A_ K H _A_ SPST - ON-NONE-OFF SHEMATI SPDT - ON-NONE-ON SHEMATI SPST - (ON)-NONE-OFF SHEMATI SPDT - (ON)-NONE-ON SHEMATI SPDT - (ON)-OFF-(ON) SHEMATI SPDT - ON-OFF-ON SHEMATI SPDT - (ON)-OFF-ON SHEMATI SPST - OFF-NONE-ON SHEMATI K F _B_ K F K F _D_ K F _E_ K F _F_ K F _G_ K F _H_ SPDT - ON-OFF-ON SHEMATI W/DEP LED IN "A" SPDT - ON-OFF-ON SHEMATI W/DEP LED IN "" SPDT - ON-OFF-ON SHEMATI W/IND LED IN "A" SPDT - ON-OFF-ON SHEMATI W/IND LED IN "" SPDT - ON-OFF-ON SHEMATI W/DEP LED IN "A" & "" SPDT - ON-OFF-ON SHEMATI W/DEP LED IN "A" & IND LED IN "" SPDT - ON-OFF-ON SHEMATI W/IND LED IN "A" & DEP LED IN "" K F _B_ K F K F _D_ K F _E_ K F _F_ K F _G_ K F _H_ SPDT - ON-OFF-ON SHEMATI W/DEP NEON BULB IN "A" SPDT - ON-OFF-ON SHEMATI W/DEP NEON BULB IN "" SPDT - ON-OFF-ON SHEMATI W/IND NEON BULB IN "A" SPDT - ON-OFF-ON SHEMATI W/IND NEON BULB IN "" SPDT - ON-OFF-ON SHEMATI W/DEP NEON BULB IN "A" & "" SPDT - ON-OFF-ON SHEMATI W/DEP NEON IN "A" & IND NEON IN "" SPDT - ON-OFF-ON SHEMATI W/IND NEON IN "A" & DEP NEON IN "" K F _B_ K F K F _D_ K F _E_ K F _F_ K F _G_ K F _H_ SPDT - ON-OFF-ON SHEMATI W/DEP BULB IN "A" SPDT - ON-OFF-ON SHEMATI W/DEP BULB IN "" SPDT - ON-OFF-ON SHEMATI W/IND BULB IN "A" SPDT - ON-OFF-ON SHEMATI W/IND BULB IN "" SPDT - ON-OFF-ON SHEMATI W/DEP BULB IN "A" & "" SPDT - ON-OFF-ON SHEMATI W/DEP BULB IN "A" & IND BULB IN "" SPDT - ON-OFF-ON SHEMATI W/IND BULB IN "A" & DEP BULB IN "" GENERAL SHEMATI INFORMATION INDIATES MAINTAIN ATION (FIXED POSITION) INDIATES MOMENTARY ATION (AUTOMATI RETURN POSITION) K, K, KP and K ING /URRENT OMPONENTS RATINGS SOURE ATEGORY SOURE OLOR URRENT TYPIAL / 6 VD INANDESENT. AMPS 6 VD 8 VD VD INANDESENT.08 AMPS VD VD VD INANDESENT.0 AMPS VD 8 VD 5 VA NEON AMBER.9 ma 5 VA 5 VA 50 VA NEON AMBER.9 ma 50 VA 50 VA RED 0 ma.9 VD.5 VD V LED PRODUTS* GREEN 0 ma.5 VD.5 VD AMBER 0 ma.95 VD.5 VD BLUE 0 ma.5 VD.0 VD 6 V LED PRODUTS SEE HART 0 ma 6 VD 8 VD V LED PRODUTS SEE HART 0 ma VD VD V LED PRODUTS SEE HART 0 ma VD 8 VD * See Appendix for complete Voltage/Ratings Table. 96 OTTO Full Line atalog Specifications Subject To hange Without Notice
5 PP PANEL PLUGS PANEL PLUGS FOR ROKER & R SERIES K THROUGH K5 & R PANEL PLUGS K-PA Panel Plug One Piece Molded K-PB Panel Plug Assembled Plug 0.06 THIKNESS = P/N THIKNESS = P/N THIKNESS = P/N THIKNESS = P/N RANGE GASKET REOMMENDED RANGE WITHOUT GASKET Width Length RANGE GASKET REOMMENDED RANGE WITHOUT GASKET Width Length K-PB Panel Plug Assembled Plug 0.06 THIKNESS = P/N THIKNESS = P/N K-PB Panel Plug Assembled Plug P/N RANGE GASKET REOMMENDED RANGE WITHOUT GASKET Width Length RANGE GASKET REOMMENDED RANGE WITHOUT GASKET Width Length K5-PA / R-PA Panel Plug One Piece Molded P/N RANGE GASKET REOMMENDED RANGE WITHOUT GASKET Width Length Series Plug Style Plug olor ➂ Button Insert ➂ K ➀ K ➁ K ➁ K ➁ K5 ➀ R ➀ PANEL PLUG PART NUMBER ODE X X X X X P A. One Piece Molded B. Assembled Plug ➀ Available in Style A only. ➁ Available in Style B only. ➂ Additional colors available. ontact factory.. Red. Black 9. White *K series only. **Molded plug only.. Red*. Black* 9. White* Z. NONE** 6 OTTO Full Line atalog Specifications Subject To hange Without Notice
6 AP APPENDIX LED /URRENT RATINGS TABLE ROKER AND ROTARY SWITH /URRENT RATINGS TABLES K, K, KP and K ING /URRENT OMPONENTS RATINGS SOURE ATEGORY SOURE OLOR URRENT TYPIAL / 6 VD INANDESENT. AMPS 6 VD 8 VD VD INANDESENT.08 AMPS VD VD VD INANDESENT.0 AMPS VD 8 VD 5 VA NEON AMBER.9 ma 5 VA 5 VA 50 VA NEON AMBER.9 ma 50 VA 50 VA RED 0 ma.9 VD.5 VD V LED PRODUTS* GREEN 0 ma.5 VD.5 VD AMBER 0 ma.95 VD.5 VD BLUE 0 ma.5 VD.0 VD 6 V LED PRODUTS SEE HART 0 ma 6 VD 8 VD V LED PRODUTS SEE HART 0 ma VD VD V LED PRODUTS SEE HART 0 ma VD 8 VD K/K5 ING /URRENT OMPONENTS RATINGS SOURE ATEGORY SOURE OLOR URRENT TYPIAL / 6 VD INANDESENT. AMPS 6 VD 8 VD VD INANDESENT.08 AMPS VD VD VD INANDESENT.0 AMPS VD 8 VD 5 VA NEON AMBER.9 ma 5 VA 5 VA 50 VA NEON AMBER.9 ma 50 VA 50 VA V LED PRODUTS* RED 0 ma.0 VD.5 VD GREEN 0 ma. VD.6 VD AMBER 0 ma. VD.5 VD 6 V LED PRODUTS SEE HART 0 ma 6 VD 8 VD V LED PRODUTS SEE HART 0 ma VD VD V LED PRODUTS SEE HART 0 ma VD 8 VD SOURE ATEGORY V LED PRODUTS* R ING /URRENT OMPONENTS RATINGS SOURE OLOR URRENT TYPIAL / RED 0 ma.0 VD.5 VD GREEN 0 ma. VD.6 VD AMBER 0 ma. VD.5 VD 6 V LED PRODUTS SEE HART 0 ma 6 VD 8 VD V LED PRODUTS SEE HART 0 ma VD VD V LED PRODUTS SEE HART 0 ma VD 8 VD *Intended for use with external resistor. The volt switches are intended to have a resistor added in series into the lighting circuit by the customer. To determine the approximate value of the resistor, use the equation below: RESISTOR SIZE = POWER SUPPLY - LED LED URRENT 6 OTTO Full Line atalog Specifications Subject To hange Without Notice
7 LED /URRENT RATINGS TABLE AP APPENDIX ILLUMINATED PUSHBUTTON SWITH & INDIATOR S /URRENT RATINGS TABLES LP, LP5 AND LPL SERIES ING /URRENT OMPONENTS RATINGS SOURE ATEGORY V* PRODUTS 6V PRODUTS V PRODUTS V PRODUTS LED OLOR URRENT (D) D RED 0 ma.9v.5v GREEN AMBER BLUE DEEP GREEN OLORS OLORS OLORS 0 ma.v.6v 0 ma.v V 0 ma 6V 8V 0 ma V.5V 0 ma V 8.6 V LPS ING /URRENT OMPONENTS RATINGS SOURE ATEGORY V* PRODUTS V PRODUTS V PRODUTS LED OLOR RED GREEN AMBER BLUE DEEP GREEN OLORS OLORS URRENT 0 ma V.5 V 0 ma. V V 0 ma V V 0 ma V 8.6 V LP7-D and LP9 SERIES ING /URRENT OMPONENTS RATINGS SOURE ATEGORY LED OLOR, WAVELENGTH (nm) URRENT V PIPE STYLE RED (6) GREEN (55) AMBER (59) BLUE (70) 0 ma 0 ma 0 ma 0 ma 5 ma V.V.V.V.9V.V.6V.V.8V.5V V, TRANSLUENT FULLY ILLUMINATED STYLE RED (60) GREEN (55) AMBER (60) BLUE (65) V OLORS, PRODUTS SAME AS V 0 ma 0 ma 0 ma 0 ma 5 ma.95v.v.v.v.85v.5v.v.5v V.V (0 ma).0v.0v LP9L SERIES ING /URRENT OMPONENTS RATINGS SOURE ATEGORY V PRODUTS LED OLOR, WAVELENGTH (nm) RED (6) GREEN (55) AMBER (59) BLUE (70) URRENT 0 ma 0 ma 0 ma 0 ma 5 ma V.V.V.V.9V.V.6V.V.8V.5V /URRENT TABLES V PRODUTS OLORS, SAME AS V (0 ma).0v.0v *Intended for use with external resistor. The volt switches are intended to have a resistor added in series into the lighting circuit by the customer. To determine the approximate value of the resistor, use the equation below: RESISTOR SIZE = POWER SUPPLY - LED LED URRENT Specifications Subject To hange Without Notice 6
SERIES FEATURE MAX RATING SEAL RATING APPROVALS MOUNTING CIRCUITRY
SWITH SELETION GUIDE Rocker Switches SERIES FEATURE MAX RATING SEAL RATING APPROVALS MOUNTING IRUITRY (Resistive @ 0VA, VD) (Panel Opening) K Sealed, 6A IP6S UL (E605), SA (LR65),.5 x 0.55 SPST, SPDT Illuminated
More informationGeneral Specifications
eries W lides Rotaries Programmable Illuminated P Pushbuttons upplement Accessories Indicators General pecifications Electrical apacity (Resistive Load) Power Level: 9A @ 125V A or 6A @ 250V A Other Ratings
More informationGeneral Specifications
General Specifications Electrical apacity (Resistive Load) Power Level: 6A @ 25V A & 3A @ 250V A or 6A @ 30V Other Ratings ontact Resistance: Insulation Resistance: ielectric Strength: Mechanical Life:
More informationGeneral Specifications
Series M Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical Capacity
More informationC-Series. Circuit Breaker.
-Series ircuit Breaker The -Series hydraulic/magnetic circuit breakers are ideal for applications that require higher amperage and voltage handling capability in a smaller package. They are available in
More informationSwitches & Pilot Devices
ømm - HW Series Key features: ocking lever removable contact blocks Finger-safe IP0 contacts as standard, other terminal styles available Tamperproof construction All E-stops meet EN8 and are compliant
More informationGeneral Specifications
Series M00 Snap-ction Pushbuttons Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles eneral Specifications lectrical apacity
More informationGeneral Specifications
General pecifications Electrical apacity (Resistive Load) Low Level: 00mA maximum @ 2V Other Ratings ontact Resistance: Insulation Resistance: ielectric trength: Mechanical Life: Electrical Life: Nominal
More informationDisplay Lights. Display Lights. LT1 Series. LT1 Series SignaLight Light Towers. Display Lights with a Tower of Advantages
LT1 Series SignaLight Light Towers with a Tower of Advantages Key features of the LT1 series SignaLight towers include: ustom configurations meet your specifications simply Select your flash preference,
More informationM = Maintained S = Spring Return. Operator Only ➊ No Contacts M M 800T-00HX2KB6 M M 800T-24HR2KB6AX 800T-24HR17KB6AX Incandescent
ulletin 800T 30.5 mm Push uttons 2-Position Knob/Lever Type Selector Switch Units, Illuminated Operator Position Operator Type Standard Knob Knob Lever Type Lamp Volts olor M = Maintained S = Spring Return
More informationQ6 series. Ø6 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING LED INDICATORS
IND-Q6-17-07 LED INDICATORS DISTINCTIVE FEATURES 3 mm colored diffused epoxy lens or 3 mm water clear super bright LEDs Prominent, recessed and flush bezel styles (2.0 x 0.5) solder lug terminals, pins
More informationMT5C/8C Ø56mm / Ø85mm Steady & Flashing with Buzzer
MT5/8 Ø56mm / Ø85mm Steady & Flashing with uzzer TOWER LIGHTS Incandescent or Optional bulbs available Selectable Steady or Flashing Modes Prism-cut lenses for even light distribution Surface, or Wall
More informationApplication Description
- N Mechanically Held February ontents Description Page Product Description...... - Application Description... - Features................ - Operation.............. - Instructional Leaflets..... - Standards
More informationSINGLE POLE SOCKETS - SOLDER MOUNT
SINGLE POLE SOCKETS - SOLDER MOUNT 450 - XXXX - XX - XX - 00 Body Brass Copper* Spring Beryllium Copper (Heat Treated) Dash Body Spring RoHS -03 Gold over Nickel Gold over Nickel -04 Electro-Tin Electro-Tin
More informationDistinctive Characteristics
Distinctive haracteristics Extremely low profile of. (.mm) from P to top of switch. Red, green, or yellow LED with spot or full face illumination. Rubber seal construction prevents contact contamination
More informationQuick Reference Guide Gemini Series Switches
Quick Reference Guide The TE Connectivity extensive Gemini A and Gemini AE Series offer one and two poles with multi circuit configurations, including: momentary function, locking toggle to avoid unwanted
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPEIFIATIONS Features and Benefits Board-mounting pegs provide
More informationRT T Rack Mount Test T
RT T Rack Mount Test T Switch ALIATION RT switch assemblies for rack and switchboard mounting permit convenient isolation of switchboard relays, meters and instruments. RT racks allow quick and easy multi-circuit
More informationAHU. Specifications. Materials. Ordering Information E UL Approved Illuminated Pushbutton. page 1
Specifications RoHS Compliant E222871 AHU Electrical Ratings Sealing Degree Electrical Life Mechanical Life Contact Resistance 3A @ 125VAC, 65 C, 50K cycles 3A @ 250VAC, 65 C, 50K cycles IP65 50,000 cycles
More informationSMT TR series. Surface mount tiny washable rocker switches. Distinctive features and specifications.
SMT TR series Surface mount tiny washable rocker switches istinctive features and specifications Entirely designed for surface mount Tape and reel packaging Reflow solderable High temperature plastic materials
More informationHMI Components. Series. Raised design PCB (with adaptor) Machinery and Automation. Indicator Illuminated pushbutton
Edition 10/2016 HMI Components 41 Series Characteristics The rectangular design of the Series 41 (18 x 24 mm) makes it especially suited: Raised design PCB (with adaptor) Functions The Series 41 incorporates
More information9960 SERIES HALL EFFECT SENSOR
9960 SERIES HALL EFFET SENSOR Introduction Model 9960 Hall effect rotary position sensors are available in numerous standard configurations with fast, one week delivery. Available configurations include
More informationAccessories. Accessories
Series 61 16mm 22.5mm 21 x 21mm 21 x 27mm IP65 5 250V INDITOR PUSHUTTON E-STOP KEYLOK SELETOR hoose one component from each of the coloured sections to assemble a complete switch. For other options or
More informationROCKER SWITCHES B 1 SERIES 3A SPECIFICATIONS AGENCY APPROVALS
Miniature Rocker & Paddle switches HOW TO ORDER AGENCY APPROVALS C File N E195524 File N E195524 CHARACTERISTICS The most comprehensive range of terminations, brackets, toggle sizes and bushings. Dially
More informationRound Indicator Lights Mounting Hole Page
PRODUCT SERIES Round Indicator Lights Page 8, &. 9. &..7 - NEMA -R.7 8 & 9. 7. 8. 9 7. 8. - NEMA -R.9.9 Indicator Lights.7,.. 7. Rectangular Indicator Lights Panel Cutout. x.. x. 7 & 7. x.8 8. x. 9 & 7.
More informationSection. Display Lights. Selection Guides... C 2. SignaLight Towers... C 4
ourtesy of Steven Engineering, Inc. 230 Ryan Way, South San rancisco, A, 94080-6370 Main Office: (650) 588-9200 Outside Local Area: (800) 258-9200 www.steveneng.com Section Selection Guides... 2 SignaLight
More informationPSOL. Remove mounting screws. Remove ears. Add 6" leads PSOL = #12 AWG solid PSTR = #12 AWG stranded
Switch Options Work Smarter Not Harder Arrow Hart custom configured wiring devices can match any of your complex industrial or commercial job needs, simplifying your project and maximizing your bottom
More informationQuick Reference Guide Tiny Pushbutton and Toggle Series Switches
Quick Reference Guide Tiny Pushbutton and Toggle Series Switches TE Connectivity offers the Tiny line of switches in a range of ratings from 0.4VA up to 3A @125 VAC. The extensive product line includes
More informationC-Series. Circuit Breaker
-Series ircuit Breaker The -Series hydraulic/magnetic circuit breakers are ideal for applications that require higher amperage and voltage handling capability in a smaller package. They are available in
More informationonlinecomponents.com
MATERIAL SPEIFIATIONS: ontacts Gold over nickel or silver plate ase Material Thermoplastic V-0 Terminals/Fixed ontacts.tin lead plate Terminal Seal...Epoxy on single pole, optional on double pole Process
More informationEAO Product Information. Series 84
EAO Product Information Series Switches and Indicators Switches and Indicators Index Series Description Page 539 Product Assembly Page 540 Mounting Instruction Page 541 Product Range - pushbuttons for
More informationSection. Display Lights Selection Guides... C 2. SignaLight Towers 70mm LT7 Modular Series... C 4 56mm LT1 Series...
Section New Selection Guides... 2 SignaLight Towers 70mm LT7 Modular Series...... 4 56mm LT1 Series.............. 7 Panel Mounting Annunciators SL30 Series, 1.18" (30mm)... 14 SL30-IPS Series 1.18" (30mm)
More informationProducts Available From
Products vailable From Solid State Relays and I/O Modules atalog utomation ontrols atalog Switches and Sensors atalog Motors and Fans atalog Pneumatics atalog 5 For your copy of the catalogs, contact Tel:
More informationContacts, Tools, and Accessories
ontacts, Tools, and ccessories able reduction sleeve REDUTION SLEEVEs FOR BLE Reduction Sleeve Length for use with Mechanical able lamp or Basketweave able Grip Shell Sleeve P/N Sleeve inner diameter [mm]
More informationTOGGLE SWITCHES IP67 A 9 SERIES 1B AGENCY APPROVALS SPECIFICATIONS
AGENCY APPROVALS SPECIFICATIONS Sealed miniature toggle switches C IP67 File N E195524 File N E195524 In conformity with: EN 60529: 1991 IEC 529: 1989 CHARACTERISTICS Contact Rating: S (silver) - 5A with
More informationsealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
More informationAPEM COMPONENTS LIMITED
APEM COMPONENTS LIMITED Designed and manufactured in the UK Q-Series Panel Mount LED Indicators PANEL MOUNT LED INDICATORS Apem Components, the renowned switch manufacturer, have complemented their extensive
More informationSorenson Lighted Controls
Sorenson Lighted Controls Illuminating Innovation 9 INDICATOR CATALOG New Products Located on Pages - Sorenson Lighted Controls Illuminating Innovation ORDER TERMS & CONDITIONS Minimum OEM Order Value:
More informationGeneral Specifications
eneral Specifications Electrical apacity (Resistive Load) Logic Level: 0.V maximum @ 8V /D maximum (pplicable Range 0.m ~ 0. @ 0mV ~ 8V) Note: See Supplement Index to find explanation of operating range.
More informationSPEC Pak. Sealed Power For Environmental Connections. Anderson Power Products. Marine Wind Power Lighting Transportation Pumps Ground Support
SPEC Pak Sealed Power For Environmental Connections Marine Wind Power Lighting Transportation Pumps Ground Support Machine Tool Industrial Automation Motor Solar Power Harsh Environments Anderson Power
More informationRoHS. Specifications. Part Number Configurator
RVW Series Rocker Switch Applications / Markets Floor Care Appliances Medical Equipment Electrical Houseware Specifications Commercial Appliances Home Appliances Features & Benefits Industrial Controls
More informationMIL-DTL Series III Type Connectors
-90 Memory Stick How To Order Sample Part Number -90 NF -5 N H P Series / Basic Part No. -90 NF = Aluminum/admium Olive Drab ME = Aluminum/Electroless Nickel MT = Aluminum/Nickel PTFE ZR = Aluminum/Zinc-Nickel
More informationCMS SLIDE SWITCHES (SMD) COPAL ELECTRONICS CMS T B FEATURES PART NUMBER DESIGNATION. RoHS compliant INTERNAL STRUCTURE.
OPAL ELETRONIS SLIDE SWITHES (SMD) MS RoHS compliant INTERNAL STRUTURE 7 FEATURES RoHS compliant Excellent contact stability by twin Gold-plated contact mechanism Load life of, cycles ompatible with automatic
More informationFlammability FEATURES. Cover. Slider C S S T B
OPAL ELETRONIS OMPAT SLIDE SWITHES SS RoHS compliant INTERNAL STRUTURE Part name Material Flammability FEATURES Low-profile of mm Self-return type available RoHS compliant over Slider Housing Stainless
More informationHALL EFFECT SINGLE AXIS PADDLE
SINGLE AXIS -1 Lever Style #1-2 Lever Style #2-3 Lever Style #3 The series, available with 14 output options, offers a selfcentering single axis actuator that provides linear change in voltage output in
More informationEP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE
EP METAL TYPE - SOLDER The EP Series has set the standard in high performance speaker connectors. Apart from its durability and strength, it offers consistent superior power handling capabilities. Features:
More informationPushbutton Units Flush, Extended, Mushroom Head or Jumbo Mushroom Head Operators. Flush Button. Catalog Number
Non-Illuminated Momentary Pushbutton Units Flush Button Extended Button Mushroom Button Jumbo Mushroom Pushbutton Units Flush, Extended, Mushroom Head or Jumbo Mushroom Head Operators Contact Type Button
More informationIP series Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Distinctive features and specifications Illuminated or non-illuminated UG1212-A-R1 Tactile feedback Wide variety of configurations Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL
More informationTable of Contents. 22mm Push Buttons. 30mm Metal Push Buttons. 22mm Plastic Enclosures, Control Boxes & Installation Instructions 30-35
Altech Corporation Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced staff
More informationPRODUCT DESCRIPTION PAG ES. E110 Series 1PDT, 10 AMP RELAY 2-6. E310 Series 3PDT, 10 AMP RELAY E210 / E215 Series 2PDT, 10/15 AMP RELAY 13-19
Index PRODUCT DESCRIPTION PAG ES E110 Series 1PDT, 10 AMP RELAY 2-6 E310 Series 3PDT, 10 AMP RELAY 7-12 E210 / E215 Series 2PDT, 10/15 AMP RELAY 13-19 E410 / E415 Series 4PDT, 10/15 AMP RELAY 20-24 E610
More informationGeneral Specifications
Series F General Specifications Electrical apacity (Resistive Load) Low/Logic Level: m @ V D Other Ratings ontact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life:
More informationControl Stations ø 22
Control Stations ø 22 CONTROL STATIONS - NON-ILLUMINATED Technical Info (p. 103) MUSHROOM HEAD Ø 40 - MAINTAINED Push-turn to reset Part Number M16/20 47.9 25.7 Ø 40 Red NC EMERGENCY STOP LBX10510 Red
More informationAmphenol. Amphenol 97 Series Standard Cylindrical Connector. MIL-5015 Style Connectors widely used for:
Amphenol 97 Series Standard Cylindrical Connector 12-022-15 MIL-5015 Style Connectors widely used for: Factory Automation, Robotics Machine Tool, Instrumentation Welding Equipment Medical Equipment Amphenol
More informationKRPA, KRP, KA, KR series
Catalog 1084 Issued -0 KRPA, KRP, KA, KR series to 10 Amp General Purpose Relay File E944, E, E818 (KR Hermetic) File LR14 KRPA KRP KA Users should thoroughly review the technical data before selecting
More informationSeries 300. Miniature Rocker & Paddle Switches
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both silver and
More informationRelays & Sockets RU Series Universal Relays. With Latching or Momentary Lever. Standard (without lever) Key features:
RU Series Universal Relays Key features: Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator
More informationOrdering Information Type Catalog No. Circuit Electrical Switch/Contact Cable Protection Function Ratings Type Level
FM SERIES The FM series foot switches are ideal for light or medium duty applications and especially medical applications. The compact, sturdy but small, ABS housing is designed to meet all the different
More informationComplete units: Push-buttons ø 22mm
Complete units: Push-buttons ø 22mm FLUSH SPRING RETURN - NON-ILLUMINATED Chrome Bezel Part Number Technical Info (p. 103) Black Bezel Part Number 11 Ø 29.9 20.1 19.6 With single position clip Red NC L21AA01-1E01
More informationProject: Client: Part #: NEON -P ARC 24VDC WHT lc con cab. Date: Qty: Length CST Custom Length cuttable every 2.81 Operating Voltage (ov)
LED Neon Light Arch LED Neon Light Arch Length CST Custom Length cuttable every 2.81 Operating Voltage (ov) 24V DC Finish (fin) WHT White 2700K Incandescent White 3000K Warm White 3500K Sand White Light
More informationTECHNICAL PRODUCT DATASHEET
FORM-ENG-0018 REV A 06-02-03 ISO 9001 CERTIFIED Phone: (352) 629-5020 or 800-533-3569 Fax: (352)-629-2902 SUITABLE FOR OEM DISTRIBUTION ONLY TECHNICAL PRODUCT DATASHEET High Density PDM 21 Output / 10
More informationComplete units: Mushroom heads ø 22mm
Complete units: Mushroom heads ø 22mm MAINTAINED - NON-ILLUMINATED Ø 40 MUSHROOM Push-pull to reset Technical Info (p. 103) Black Bezel Part Number 34.2 Ø 40 Red NC L22DD01-3E01 Red 2 NC L22DD01-3E02 Red
More informationOperator Heads: ø 22mm
Operator Heads: ø 22mm ONE-PIECE PILOT LIGHTS Technical Info (p. 103) SUPPLIED WITHOUT BULB Part Number L20SA40 14.3 44.1 Ø 29.8 Ø 20.2 Ø 22 Ø 29.5 1 to 6 6 Ribbed Lens Clear Smooth Lens With text or symbol
More informationCURRENT TRANSFORMERS CATALOG
URRENT TRANSFORMERS ATALOG split core solid core flex core TRENPOINT.OM TABLE OF ONTENTS SPLIT ORE Model TN2/TN3/TN4 (TNx Series) 4 TNx Series Ordering Guide 5 Model TLF/ TBF (TxF Series) 6 TxF Series
More informationRemote Input/Output Terminal System (RITS) Connectors
Product Facts Termination by generic tools Small.0 mm [.079] centerline connectors Two contact points structure provides for high contact reliability Housing colors indicate applicable wire range omponent
More informationS-1000A/2000A ROTARY CODED SWITCHES S A W FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
ROTARY ODED SWITHES S-A/A RoHS compliant INTERNAL STRUTURE S-A / A series FEATURES Part name Housing ontact Terminal pin Base O ring Material Polybutyleneterephthalate opper alloy, Gold-plated Polybutyleneterephthalate
More informationwww.andersonpower.com - 1 - Rugged and Sealed (IP68) Plugs and Receptacles For Use with APP Powerpole Signal, Power & Ground Contacts & Housings APP s SPEC Pak Connector Series uses rugged and environmentally
More informationCURRENT TRANSFORMERS CATALOG
URRENT TRANSFORMERS ATALOG split core solid core flex core TRENPOINT.OM TABLE OF ONTENTS SPLIT ORE Model TN2/TN3/TN4 (TNx Series) 3 TNx Series Ordering Guide 4 Model TLF/ TBF (TxF Series) 5 TxF Series
More informationSpecifications. Environmental. Operating Temperature [C (F)] for TRIAC output ( ) for all others
Specifications Environmental Line Line Green Line Analog ertifications UL Listed, SA Approved, and E Marked for all applicable directives Features S Wide selection for increased application flexibility
More informationCMS SLIDE SWITCHES (SMD) FEATURES PART NUMBER DESIGNATION CMS T B. Please refer to the LIST OF PART NUMBERS when placing orders.
SLIDE SWITHES (SMD) MS RoHS compliant INTERNAL STRUTURE FEATURES Part name over Slider Housing Slider contact Fixed contact Material Steel (SP), Tin-plated Polyamide opper alloy, Gold-plated Flammability
More informationP3-19 Series Connectors For Entertainment Lighting
Introduction P3-19 series connectors have been developed to offer the highest levels of reliability and safety. The super robust construction ensures continual and reliable operation. The rugged fully
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationKILOVAC EV200 Series Contactor With 1 Form X (SPST-NO) Contacts Rated 500+ Amps, Vdc
Product Facts Designed to be the smallest, lightest weight, lowest cost sealed contactor in the industry with its current rating (500+A carry, 2000A interrupt at 320VDC) Built-in coil economizer only 1.7W
More information22 22, 24, , 18, AWG. 50 ohm 50 ohm. 75 ohm 75 ohm. 95 ohm 95 ohm
ircular onnectors MR 4 Series onnectors General Information high density (.080 [2.0] contact centers), lightweight, subminiature, cylindrical connector series featuring crimp contacts and fingertip, push-pull,
More informationSnap Action Switches Technical Guide
These basic principles apply to all our precision switches. The specific characteristics of each model are given in more detail in the relevant production sections. Switch construction Single-pole changeover
More informationboth pin and sleeve contacts.
The different modules are inserted into the appropriate retaining frames (which vary according to the different housing sizes). There they snap in easily and safely. A special removal tool ensures quick
More informationSensing and Control the Interactive Catalog.
Interactive Catalog Supplements Catalog PDFs If you need detailed product information, or help choosing the right product for your application, see our Interactive Catalog Use the Interactive Catalog to
More informationLED Neon Light Round
LED Neon Light Round Part #: NEON -P RND HB 24VDC WHT lc con cab LED Neon Light Round SPECIFICATION 36 21.5 19.5 HORIZONTAL BEND 46.5 CST Length CST Custom Length 3 cuttable every 3.25 Operating Voltage
More informationPrecision and High Reliability Thermostats Issue 3. Datasheet. Table of Contents
Precision and High Reliability Thermostats DESCRIPTION Thermostats can provide either temperature control or overtemperature protection by breaking electrical contact when a specified temperature is reached.
More informationSpecifications. Environmental. Operating Temperature [C (F)] for TRIAC output ( ) for all others
Specifications Environmental Line Line Green Line Analog ertifications UL Listed, SA Approved, and E Marked for all applicable directives Features S Wide selection for increased application flexibility
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationPCB Relay SPST-NO G6CU-1117P-US G6CU-1114P-US G6CU-1117C-US G6CU-1114C-US SPST-NO + SPST- G6CU-2117P-US G6CU-2114P-US G6CU-2117C-US G6CU-2114C-US
PCB Relay SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load Compact: 20 15 10 mm (L W H). Low power consumption: 200 mw. Flux protection or fully sealed construction available. Unique
More informationComplete units: Selector switches ø 22mm
Complete units: Selector switches ø 22mm SELECTOR SWITCHES - NON-ILLUMINATED Technical Info (p. 13) WITH KNOB 2 and 3 positions Chrome Bezel Part Number Black Bezel Part Number Ø 29.9 Maintained positions
More informationPushbutton Switches. Sub-Miniature. Specifications: Switch Function. Page <1> 08/10/11 V1.1. : Dependent upon content material
Specifications: Contact rating : Dependent upon content material Mechanical life : 50,000 make-and-break cycles Maximum contact resistance : 20 mω initial at 2-4 V dc 100 ma for both silver and gold plated
More informationDESCRIPTION CHARACTERISTICS FEATURES DIMENSIONS. Molded DIP Reed Relays. Germany # ++49-(0) , USA #
DESRIPTION The DIP series is a very compact design having a low profile package and a high profile package. This series is compatible with all DIP relays. HARATERISTIS FEATURES High resistance option available
More informationRotary Position Technology
Magnetic Rings LM-2 / RMT-2 High rotational speed IP High IP Shock/vibration resistant Reverse polarity protection Robust Increased ability to withstand vibrations and rough installation: Eliminates machine
More information5 Watt LED Light Bulb - A19 Style Replacement for 60 Watt Incandescent E26 Light Bulbs
5 Watt LED Light Bulb - A19 Style Replacement for 60 Watt Incandescent E26 Light Bulbs Part #: LED-A19-5W-E26 The Larson Electronics LED-A19-5W-E26 5 Watt LED A19 Style Bulb is designed to fit in standard
More informationFor more information, please visit or call toll free at
GT3 GT3 Key features: 4 selectable operation modes on each model External start, reset, and gate inputs Panel mount or socket mount Large variety of timing functions and output status indicating LEs UL,
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationSPEC Pak. Sealed Power For Environmental Connections
SPEC Pak Sealed Power For Environmental Connections Marine Wind Power Lighting Transportation Pumps Ground Support Machine Tool Industrial Automation Motor Solar Power Harsh Environments Rugged and Sealed
More informationPCB Relay. --- G2R-1-SN --- G2R-2-SN LED indicator with test
PCB Relay A Power Relay for a Variety of Purposes with Various Models Conforms to VDE0 (VDE approval: C0 insulation grade), UL08, CSA., SEV, SEMKO. Meets VDE0700 requirements for household products according
More informationProfibus-PA. Profibus-PA. Process Automation. Over-Molded Cables Receptacles Field Wireables Accessories. UL File #: E
Profibus-PA Process Automation Over-Molded Cables Receptacles Field Wireables Accessories U File #: E9 PROFIBUS (Process Field Bus) is a standard for field bus communication in automation technology. The
More informationThick Film Resistor Networks, Dual-In-Line, Medium Body, Small Outline, Molded DIP, Surface Mount
Thick Film Resistor Networks, Dual-In-Line, Medium Body, Small Outline, Molded DIP, Surface Mount FEATURES Isolated, bussed and dual terminator schematics available 4, 6, or 2 terminal package Molded case
More informationFM SERIES. Altech Corp. 35 Royal Road Flemington, NJ P F
FM SERIES The FM series foot switches are ideal for light or medium duty applications and especially medical applications. The compact, sturdy but small, ABS housing is designed to meet all the different
More informationVP Series Relay 1. SUMMARY OF TYPES. C&S Controls Limited 22 Upland Road Bexleyheath KENT. DA7 4NR
&S ontrols Limited Upland Road exleyheath KENT. DA NR Tel: Fax: Email: Web: + (0)0 0 + (0)0 0 sales@candscontrolsltd.com www.candscontrolsltd.com VP Series Relay Miniature radle Relays World-wide compatibility
More informationSBE 160 / SBX 175 ORDERING INFORMATION SECTION 3. Touch Safe Interface Minimizes potential contact with live circuits per IEC & IEC 60529
Connectors - up to 175 Amps SBX and SBE connectors can integrate up to 8 auxiliary power / signal contacts along with the two primary power circuits. SBE connectors feature an IEC 60950 touch safe housing
More informationHigh-speed connectors Wall-mount PC tail receptacle with threaded standoffs MIL-DTL Series III type
233-218 Wall-mount P tail receptacle with threaded standoffs Part Number Development Sample Part Number 233-218 00 M 17 E 02 S N Series / Basic Part No. onnector Style* SuperNine High-Speed P tail wall
More informationFlag indicator. Units. V Resistive Resistive Resistive HP HP Pilot Duty ma ~ ~ ~ ~ V V VA W. (Resistive) ms Vrms Vrms Vrms. C C g-n g-n. grams 1.
SETION Power Relays/SPDT, mp Rating (D & ) UL US UL Listed When Used With Magnecraft Sockets. Push-To-Test utton Removable Lock-Down Door Flag indicator LED Status Lamp UL Recognized File No. E Finger
More informationProject: Client: Part #: NEON -P FLT HB 24VDC WHT lc con cab. Date: Qty:
LED Neon Light Flat Part #: NEON -P FLT HB 24VDC WHT lc con cab LED Neon Light Flat SPECIFICATION 27.5 19.5 HORIZONTAL BEND 46.5 CST Standard Snap Connector shown. Dimensions in millimeters See connections
More informationSeries 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors
Section : Right ngle Printed ircuit oard Receptacles With Pin ontacts, Right ngle Termination, 0-04P Lightweight, rugged right angle headers feature gold-plated contacts for thru-hole printed circuit board
More informationCROSS REFERENCE GUIDE
CROSS REFERENCE GUIDE EECO SWITCH To ITT/ C & K PRODUCTS EECO Switch A Transico Company (800) 854-3808 (714) 835-6000 FAX: (714) 482-9429 Web: www.eecoswitch.com E-Mail: sales@eecoswitch.com Revised 02/22/2005
More information