Project: Client: Part #: NEON -P FLT HB 24VDC WHT lc con cab. Date: Qty:

Transcription

1 LED Neon Light Flat

2 Part #: NEON -P FLT HB 24VDC WHT lc con cab LED Neon Light Flat SPECIFICATION HORIZONTAL BEND 46.5 CST Standard Snap Connector shown. Dimensions in millimeters See connections page for alternative connector types and dimensions Part Number Configuration NEON-P-FLT-bnd-ov-fin-lc-con-cab Length CST Custom Length 3 cuttable every 3.25 Operating Voltage (ov) 24V DC Finish (fin) WHT White 2700K Incandescent White 3000K Warm White 3500K Sand White Light Colour (lc) 4000K Neutral White Correlated Colour Temperature 5000K Cool White (CCT)t R Red 1 G Green 1 B Blue 1 O Orange 1 P Pink 1 Y Yellow 1 V Violet 1 See RGB spec sheets for Colour Changing options Bend (bnd) HB Horizontal Bend Connection (con) 3 A Snap 2 S Side 1 B Bottom 1 E End 1 Cable Length (cab) feet feet 02 2 feet 05 5 feet CST 1 Custom length and connector Beam Angle (ba) Degrees 160 Light Output Lumens IP Rating Dimensions with snap connector Width, Height, Length 2700K 319 per foot 3000K 336 per foot 3500K 349 per foot 4000K 362 per foot 5000K 388 per foot IP68 W mm H mm L Specify maximum length in inches 3 Watts 4.57W per foot Input Voltage AC 100V 240V, 277V external transformer Dimmable Yes With dimmable transformer MLV, ELV or 0-10V Operating Temperature 25 C to +50 C 13 F to 122 F Life Lumen Maintenance 50,000 hours Category Family Bend (bnd) NEON-P Professional Operating Voltage (ov) 1 SPECIAL ORDER. Please confirm availability. Allow for 6 8 weeks lead time Finish (fin) Light Colour (lc) FLT HB Horizontal Bend 24VDC WHT White 2700K IW 3000K WW 3500K SW 4000K NW 5000K CW R 1 G 1 B 1 A 1 P 1 Y 1 V 1 Connection (con) A Snap 2 S Side 1 B Bottom 1 E End 1 Cable Length (cab) CST 1 2 Can be Field Installed 3 See Connections page(s) for more details Copyright 28 SGi Lighting Inc. The LED Lighting Source. All rights reserved. REV280828

3 Part #: NEON -P FLT HB 24VDC WHT lc con cab LED Neon Light Flat Snap Connect Field Installation CONNECTIONS Low Profile Snap Connector A Factory OR Field Install Custom Length (Maximum 10 meters) Meters (Must have dual power) 4 1 Fit Neon strip through clear PC cover. Move the cover down to make room. 1A PC Cover has two sides. Ensure snap end is closest to the connector. 2 Insert connector behind PCB. See following panel for more detail. Snap End Rear End Note: Once connected there will be a 2-5mm gap between connector and light Insert connector here (Between PCB and PVC) 3 Flatten out Self-locking Clip. Align it with Neon strip and fold up. 4 Align steel U-Plate with connector guides and snap on. PVC Housing Fold flaps in PCB LED board Bottom tab sticks out 5 The U-Plate uses the conncetor guides to automatically tighten the seal 6 Bring clear PC cover back towards the front of the strip to cover connection. Finished view of Connector (Repeat Steps 1 6 to install End Cap) Snap into place Horizontal Bend shown. Use same guide for Vertical bend. Copyright 28 SGi Lighting Inc. The LED Lighting Source. All rights reserved. REV280828

4 Part #: NEON -P FLT HB 24VDC WHT lc con cab LED Neon Light Flat Factory Connection Options CONNECTIONS 1.8 End Connector E 1 Injection Molded Factory Installed Custom Length (Maximum 10 meters) Meters (Must have dual power) Side Connector S 1 Injection Molded Factory Installed Custom Length (Maximum 10 meters) Meters (Must have dual power) Bottom Connector B 1 Injection Molded Factory Installed Custom Length (Maximum 10 meters) Meters (Must have dual power) SPECIAL ORDER. Please confirm availability. Allow for 6 8 weeks lead time Copyright 28 SGi Lighting Inc. The LED Lighting Source. All rights reserved. REV280828

5 Part #: NEON -P FLT HB 24VDC WHT lc con cab LED Neon Light Flat Cable Options CONNECTIONS Cable Options for Single Colour 02, 05, 10, 30 or CST (Custom length) 3 in 31 mm 5 in Easy Quick Connects 2ft, 5ft, 10ft, 30ft or CST (Minimum 3in) Hard wire to Power supply 15 mm Cable Junction 10 mm Total length when connected 34 mm 36 mm Black Negative Red Positive + To Transformer 10 mm To Lights 27 mm Red Positive + Black Negative 11 mm 55 mm 11 mm 18AWG 2 Conductor Shielded Cable CABLE-18AWG-GRY-2S 4.1 mm Shielding Red wire 1.8 mm 14 mm 17 mm Custom Length Black wire 1.8 mm Please confirm availability for custom cable lengths Copyright 28 SGi Lighting Inc. The LED Lighting Source. All rights reserved. REV280828

6 Part #: TRACK NEON 1724SL CST SIL N LED Track Neon 1724 Self-Locking SPECIFICATION Finish (fin) SIL Silver Lens (ln) N None Custom Length Housing Custom Track lengths available Please specify length in inches Standard length 1 m (39 ), maximum 2.5 m (98 ) Aluminum Alloy Compatible Lights Flat LED Neon Light NEON-P-FLT-ov-fin-lc-con-cab Round LED Neon Light NEON-P-RND-ov-fin-lc-con-cab std. Dimensions in millimeters Part Number Configuration TRACK-NEON-1724SL-CST-fin-ln Category Family Length Finish (fin) TRACK NEON 1724 SL CST Custom Length SIL Silver N None Lens (ln) Copyright 28 SGi Lighting Inc. The LED Lighting Source. All rights reserved. REV280828

7 Part #: CLIP NEON 1724SL 35MM SIL N LED Clip Neon 1724 Self-Locking SPECIFICATION Finish (fin) SIL Silver Lens (ln) N None Length mm (Tolerance +/ 0.3mm) Housing Aluminum Alloy Compatible Lights Flat LED Neon Light NEON-P-FLT-ov-fin-lc-con-cab Round LED Neon Light NEON-P-RND-ov-fin-lc-con-cab CLIP CLIP CLIP Dimensions in millimeters Part Number Configuration CLIP-NEON-1724SL-35MM-fin-ln Category Family Length Finish (fin) CLIP NEON 1724 SL 1.37 IN 35mm SIL Silver N None Lens (ln) Copyright 28 SGi Lighting Inc. The LED Lighting Source. All rights reserved. REV280828

8 Part #: TRACK NEON 1724SL CST fin N LED Track/Clip Neon 1724 Self-Locking Mounting Guide INSTALLATION Self-Locking clips will fit in here Mount LED Neon lights in long lengths of track to achieve straight installations OR multiple clips along a rounded surface for curved insallations Track with Self-Locking Clip 1 meter or 2 meter lengths (field cuttable to custom lengths) 35 mm Straight Install Curved Install Straight Install Curved Install Screw head completely flush with bottom of track Clips fit into tracks Gently lay Neon inside track. Some connectors may not fit into tracks. In these situations, only neon body fits inside the track and larger connectors will fall just outside. Straight Install Curved Install Copyright 28 SGi Lighting Inc. The LED Lighting Source. All rights reserved. REV280828

9 Part #: TRACK NEON 1724PVC CST WHT N LED Track Neon 1724 PVC SPECIFICATION Finish (fin) WHT White Lens (ln) N None Custom Length Housing Custom Track lengths available Please specify length in inches Standard length 1 m (39 ), maximum 2 m (78 ) PVC Compatible Lights Flat LED Neon Light NEON-P-FLT-ov-fin-lc-con-cab Round LED Neon Light NEON-P-RND-ov-fin-lc-con-cab Installation Note No self-locking feature Not recommended for undermount installations std. Dimensions in millimeters Part Number Configuration TRACK-NEON-1724PVC-CST-fin-ln Category Family Length Finish (fin) TRACK NEON 1724PVC CST Custom Length WHT White N None Lens (ln) Copyright 28 SGi Lighting Inc. The LED Lighting Source. All rights reserved. REV280828

10 Part #: CLIP NEON 1724PVC 35MM WHT N LED Clip Neon 1724 PVC SPECIFICATION Finish (fin) WHT White Lens (ln) N None Length mm (Tolerance +/ 0.3mm) Housing Compatible Lights Plastic Flat LED Neon Light NEON-P-FLT-ov-fin-lc-con-cab Round LED Neon Light NEON-P-RND-ov-fin-lc-con-cab Installation Note No self-locking feature Not recommended for undermount installations CLIP CLIP CLIP Dimensions in millimeters Part Number Configuration CLIP-NEON-1724PVC-35MM-fin-ln Category Family Length Finish (fin) CLIP NEON 1724PVC 1.37 IN 35mm WHT White N None Lens (ln) Copyright 28 SGi Lighting Inc. The LED Lighting Source. All rights reserved. REV280828

11 Project: Client: Part #: TRACK NEON 1422 CST fin N LED Track Neon 1422 SPECIFICATION Finish (fin) Lens (ln) N None SIL Silver WHT White 1 BLK Black 1 CST Custom 1 Custom Length Housing Custom Track lengths available Please specify length in inches Maximum length is 81 per track Aluminum Alloy Compatible Lights Flat LED Neon Light NEON-P-FLT-ov-fin-lc-con-cab Round LED Neon Light NEON-P-RND-ov-fin-lc-con-cab Installation Note No self-locking feature Not recommended for undermount installations max. Dimensions in millimeters Part Number Configuration TRACK-NEON-1422-CST-fin-N Finish Category Family Length (fin) TRACK NEON 1422 CST Custom Length SIL Silver WHT White 1 BLK Black 1 CST Custom 1 Lens (ln) N None 1 SPECIAL ORDER. Please confirm availability. Copyright 28 SGi Lighting Inc. The LED Lighting Source. All rights reserved. REV280828

12 Part #: CLIP NEON 1724PVC 35MM fin N LED Clip Neon 1422 SPECIFICATION Finish (fin) Lens (ln) N None SIL Silver WHT White 1 BLK Black 1 CST Custom 1 Custom Length Housing Compatible Lights Custom Track lengths available Please specify length in inches Maximum length is 81 per track Aluminum Alloy Flat LED Neon Light NEON-P-FLT-ov-fin-lc-con-cab Round LED Neon Light NEON-P-RND-ov-fin-lc-con-cab Installation Note No self-locking feature Not recommended for undermount installations CLIP CLIP CLIP Dimensions in millimeters Part Number Configuration CLIP-NEON-1422-CST-fin-N Finish Category Family Length (fin) CLIP NEON IN 35mm SIL Silver WHT White 1 BLK Black 1 CST Custom 1 Lens (ln) N None 1 SPECIAL ORDER. Please confirm availability. Copyright 28 SGi Lighting Inc. The LED Lighting Source. All rights reserved. REV280828

13 Part #: TRACK NEON 1724PVC CST WHT N LED Track/Clip Neon 1724 PVC/1422 Mounting Guide SPECIFICATION Mount LED Neon lights in long lengths of track to achieve straight installations OR multiple clips along a rounded surface for curved insallations Track 1 meter or 2 meter lengths (field cuttable to custom lengths) 35 mm Straight Install Curved Install Straight Install Curved Install Screw head completely flush with bottom of track Gently lay Neon inside track. Some connectors may not fit into tracks. In these situations, only neon body fits inside the track and larger connectors will fall just outside. Straight Install Curved Install Copyright 28 SGi Lighting Inc. The LED Lighting Source. All rights reserved. REV280828

14 + + Project: Part #: NEON -P FLT HB 24VDC WHT lc con cab LED Neon Light Flat Wiring Instructions INSTALLATION FLAT LED NEON SINGLE COLOUR WIRING To Start: You will need: Marettes Clear silicone SGi LED Transformer(s) SGi LED Neon Light(s) 18 AWG 2 conductor shielded cable * Non-dimmable drivers are available Magnetic Low Voltage Dimmer * 120V AC INPUT 120V AC Ground Transformer + RED PRL + RED BLK Ground E Line Voltage White + + D C Line Voltage Black + Output wire Purple ( ) A B Output wire Red (+) POWER AND CABLE LENGTH CHART FLAT LED NEON Using POWER-36-24VDC-watt DIMMABLE Light Length/ Cable Length Max linear ft of light per power 20 Watt Power 40 Watt Power 60 Watt Power 96 Watt Power 150 Watt Power 200 Watt Power 300 Watt Power 3 ft 7 ft 10 ft 16.5 ft 26 ft 35 ft * 52 ft * Max distance of cable between power & light 12 AWG 300 ft 14 AWG 300 ft 16 AWG 238 ft 18 AWG 150 ft 12 AWG 300 ft 14 AWG 190 ft 16 AWG 119 ft 18 AWG 75 ft 12 AWG 2 ft 14 AWG 127 ft 16 AWG 80 ft 18 AWG 50 ft 12 AWG 121 ft 14 AWG 76 ft 16 AWG 48 ft 18 AWG 30 ft 12 AWG 81 ft 14 AWG 51 ft 16 AWG 32 ft 18 AWG 20 ft 12 AWG 61 ft 14 AWG 38 ft 16 AWG 24 ft 18 AWG 15 ft 12 AWG 41 ft 14 AWG 26 ft 16 AWG 16 ft 18 AWG 10 ft * Every 32 linear feet of light must be home-run to a transformer. Copyright 28 SGi Lighting Inc. The LED Lighting Source. All rights reserved. REV280828

15 Part #: NEON -P FLT HB 24VDC WHT lc con cab LED Neon Light Flat Handling Guide HANDLING LED Neon lights are shipped in cartons. Carefully cut open cartons. Do not cut deeply, as the contents are packed tightly against the carton lid to prevent movement during shipping. Each shipping carton can fit one to four trays. Important: Keep trays flat. Placing trays on their sides can cause contents to become unravelled. Each tray can fit multiple LED Neon strips, depending on overall length. Slide out plastic tray onto flat surface. Remove LED Neon light by carefully lifting from the plastic holding tray. NOTE: PLEASE FOLLOW HANDLING INSTRUCTIONS (NEXT PAGE) CAREFULLY. IMPROPER HANDLING CAN DAMAGE LIGHTS AND VOID WARRANTY. Copyright 28 SGi Lighting Inc. The LED Lighting Source. All rights reserved. REV280828

16 Part #: NEON -P FLT HB 24VDC WHT lc con cab LED Neon Light Flat Handling Guide HANDLING 80mm mm 4.75 Gently bend (along the SIDES) to create a C or S shape Curve no tighter than 80mm circumference LED NEON FLAT MAY BE HANDLED IN THE WAYS MENTIONED ABOVE DO NOT HANDLE LED NEON FLAT AS SHOWN BELOW. IT MAY DAMAGE YOUR LIGHT. DO NOT twist. DO NOT bend up and/or down. DO NOT hang. Light MUST be installed on a solid surface. Factory installed End Connector shown. Copyright 28 SGi Lighting Inc. The LED Lighting Source. All rights reserved. REV280828

17 Part #: NEON -P FLT HB 24VDC WHT lc con cab LED Neon Light Flat Field Cutting Guide HANDLING Low Profile Snap Connector A Factory OR Field Install Custom Length Cutting the Neon Strip: 1. DO NOT CUT DOWN FROM THE LIGHT SURFACE. 2. Turn the Neon Strip on its side. 3. Locate the closest cut point to the maximum measurement. 4. With industrial strength cutters, cut the Neon strip ON ITS SIDE. Light Surface Light Surface Ensure the cut is exactly straight and perpendicular to the Neon Strip. Do not cut on an angle. Do not make a curved cut. 5 Insert non-metallic object inside opening at end of the light strip. CAUTION: Inserting the object in front of PCB (light board) 6 will damage the light. See Neon front view for more detail. 7 Finish Insert tool BEHIND light board Neon end should now have room to fit the connector. PCB (Light Board) Copyright 28 SGi Lighting Inc. The LED Lighting Source. All rights reserved. REV280828

18 LED Neon Light Flat Applications: Attention grabbing illumination for indoor and outdoor applications. Great for signage or facade lighting. SGi s Flat LED Neon combines flexibility and bright 160 degree illumination in compact and rugged housing. The unobtrusive size is easy to hide, which makes it a great solution for coves. Unlock curved lighting for any application with bend options. Bend horizontally up to 80 mm to achieve curves alongside the lens. Achieve straight or curved installations with mounting accessories like self-locking tracks or clips that allow for any angle of lighting installation (even if it s upside down). Furthermore, it s rated IP68, so it can be fully submersed to upgrade underwater features. Connect up to 32 feet on one transformer or 65 feet with a dual power option. Visit our LED Lighting Inspiration Centre 15 Brownridge Rd. Unit 6 Halton Hills, ON L7G 0C LED2DAY ( ) SGiLighting.com Copyright 28 SGi Lighting Inc. The LED Lighting Source. All rights reserved. REV280828