Bulletin 800FC 22.5 mm Configured Pendant Stations Product Overview. Position 1... Position 9
|
|
- Esmond Blair
- 5 years ago
- Views:
Transcription
1 Product Overview Configured Pendant Stations -, -, -, and -button configurations -, -, and -speed push buttons IP, NEMA Type /X/ Finger-safe contact blocks uttons are flush-mounted with the enclosure to reduce accidental operation Use of standard ul F extended push buttons Electrical and mechanical interlocks ulletin FP -, -, and -Speed Operators IP/IP, NEMA Type /X/ Engineering grade thermoplastics Chemical-resistant for harsh environments ooted operator Operator Mounting - Vertical vs Horizontal Definition Due to the design of the enclosures, operators are mounted in both a vertical and horizontal orientation The easiest way to visualize the operator orientation is by observing the contact block direction attached to the operators If the contact blocks are mounted vertically the operator is mounted vertically in the enclosure Vertical mounted operators are only found in position & of the - hole enclosure If the contact blocks are mounted horizontally the operator is mounted horizontally in the enclosure Horizontal mounted operators are found in position of the -hole enclosure and all positions of the --hole enclosures It is necessary to know this when ordering individual operators for populating at the customer location Mechanical Interlock -, -, and -speed operators Screw-down mounting -across x deep contact blocks Snap-down contact blocks ifurcated and Quad Connect contact blocks Color-coded contact blocks Table of Contents Product Selection - Catalog Number Explanation - Accessories - Specifications - Approximate Dimensions - Product Certifications Certifications Standards Compliance Terminal Identification RoHS UR/UL, CSA, CCC, CE NEMA ICS-, UL, CSA C No, EN ISO, EN -, EN --, EN -- EN/IEC - Operator Sequence when using a Mechanical Interlock The -, -, and -speed operators can be mounted with either our standard Cat No F-ALP latch or a mechanical interlocking latch (Cat No FC-ALP) For the -hole enclosure, the mechanical interlock can only be located in positions &, with the black operator being located in position and the white operator being located in position For the - -hole enclosures, the mechanical interlock can be located in any two adjacent positions For the - -hole enclosures, the white operator will be located in position X of the mechanical interlock and the black operator will be located in position X+ of the mechanical interlock Operator Assembly Sequence and Mounting Orientation Vertical Mount Operators Horizontal Mount Operators Position X Pos Pos Multi- Operator Multi-Operator Position X+ Position Position Position Position Position Position Position Position Position -Hole Enclosure -Hole Enclosure -Hole Enclosure -Hole Enclosure Operator in Position is mounted horizontal, contact blocks are horizontal Operators in Positions & are mounted vertical, contact blocks are vertical Operators in all positions are mounted horizontal, contact blocks are horizontal wwwabcom/catalogs Preferred availability cat nos are bold Publication A-CAA-EN-P -
2 Product Selection Product Selection Enclosures Enclosure Type -hole -hole -hole -hole Pkg Quantity Pendants Yellow Plastic IP Cat No FC-Z FC-Z FC-Z FC-Z Housings supplied with cable sleeve, hanger ring, cable clamp, wire guides, and gasket -, -, and -Speed Operators A D C a Operator Type -speed single arrow -speed double arrow -speed -speed Proper contact block assembly of these devices is required Please see contact block information on page b Cap Color White lack Arrow Direction Chart UP RIGHT DOWN LEFT Cat No FC-Z FP C A U a b c Valid with Table a Selections: c Symbol Vertical Mounting lack with White Arrow White with lack Arrow Cat No FC-Z Horizontal Mounting White with lack Arrow lack with White Arrow U A,, C lank lank lank lank U One-Speed Operators DOWN UP U RIGHT LEFT U A U U LEFT RIGHT UP DOWN U D DOWN UP U RIGHT LEFT U U U LEFT RIGHT UP DOWN U -speed DOWN Two-Speed Operators -speed UP U -speed RIGHT -speed LEFT U -speed -speed U -speed U -speed LEFT -speed RIGHT -speed UP U C -speed DOWN Three-Speed Operators -speed -speed DOWN -speed UP U -speed RIGHT -speed LEFT U U -speed -speed -speed U -speed LEFT -speed RIGHT -speed UP -speed -speed DOWN Note: Please see page for proper latch and contact block configurations Text (DOWN, UP, LEFT, etc) indicates arrow direction Text is not printed on operators Cat No F-ALP (standard latch) and Cat No FC-ALP (mechanical interlock latch) can be used with these operators ooted style of operators for pendant stations - wwwabcom/catalogs Preferred availability cat nos are bold Publication A-CAA-EN-P
3 Product Selection ul F Two-Position Twist-to-Release and Twist-to-Release/Push-Pull Operators Operator Cat No Guard Cat No Twist-to-release Red FP-MTPX Twist-to-release Red, illuminated FP-LMTPN RX Keyed twist-to-release Red FP-MKPX Twist-to-release or push-pull Red, monolithic FD-MTX Twist-to-release or push-pull Red, monolithic with guard, monolithic FD-MTX F-AMEGY Select for V AC/DC or for V AC ul F Push utton Operators and Caps Extended & Non-Illuminated Cap Color lack White Green Red Yellow lue Symbol Definition Operator Cat No Cap Cat No Complete Operator Cat No Composite Cat No/ No Electrical Interlock Composite Cat No/ Electrical Interlock lank FP-E FP-EPX FP-EPX LEFT or DOWN Single arrow F-AE FP-E FP-EPX FP-EPX Single arrow F-AECU FP-EU FP-EUPX FP-EUPX LEFT or DOWN FP-E Double arrow F-AECU FP-EU FP-EUPX FP-EUPX Double arrow F-AECU FP-EU FP-EUPX FP-EUPX lank FP-E FP-EPX FP-EPX UP or RIGHT Single arrow F-AE FP-E FP-EPX FP-EPX Single arrow F-AECU FP-EU FP-EUPX FP-EUPX UP or RIGHT FP-E Double arrow F-AECU FP-EU FP-EUPX FP-EUPX Double arrow F-AECU FP-EU FP-EUPX FP-EUPX lank FP-E FP-EPX START/ALARM Start/Alarm F-AECU FP-EU FP-EUPX FP-E START Start symbol F-AECU FP-EU FP-EUPX lank FP-E FP-EPX STOP Stop symbol FP-E F-AE FP-E FP-EPX lank FP-E FP-EPX ALARM Alarm FP-E F-AECU FP-EU FP-EUPX lank FP-E FP-EPX R Reset symbol FP-E F-AE FP-E FP-EPX For V AC/DC units, add V for low voltage contact blocks Example: Cat No FP-EPX becomes Cat No FP-EPXV Mechanical interlock is not allowed ul F Push utton Operators Extended & Illuminated Lens Color Operator Cat No Composite Cat No Green FP-LE FP-LEPN GX Red FP-LE FP-LEPN RX Yellow FP-LE FP-LEPN WX lue FP-LE FP-LEPN X Clear FP-LE FP-LEPN WX Select for V AC/DC or for V AC Mechanical interlock is not allowed ul F Selector Switch Operators Maintained & Non-Illuminated Number of Positions Keyed Operator Cat No Composite Cat No No FP-SM FP-SMPX Yes FP-KM FP-KMPX No FP-SM FP-SMPX Yes FP-KM FP-KMPX For V AC/DC units, add V for low voltage contact blocks Example: Cat No FP-EPX becomes Cat No FP-EPXV wwwabcom/catalogs Preferred availability cat nos are bold Publication A-CAA-EN-P -
4 Product Selection ul F Multi Operators and Caps Extended C A Vertical Mounting Symbol Definition Illumination Operator Cat No lank (black and white cap) UP (white)/down (black) RIGHT (white)/left (black) (white)/ (black) UP (white)/down (black) RIGHT (white)/left (black) (white)/ (black) LEFT (black)/right (white) DOWN (black)/up (white) (black)/ (white) LEFT (black)/up (white) DOWN (black)/up (white) (black)/ (white) Single arrow Single arrow Single arrow Double arrow Double arrow Double arrow Single arrow Single arrow Single arrow Double arrow Double arrow Double arrow C Position A Cap Cat No A Horizontal Mounting Position C Cap Cat No ack of Panel Cat No Non-Illuminated FP-UX F-PX F-AEU F-AEU Illuminated FP-LUX F-PN WX Vertical Mounting Non-Illuminated FP-UX F-PX F-AECUCU F-AECUCU Illuminated FP-LUX F-PN WX Non-Illuminated FP-UX F-PX F-AECUCU F-AECUCU Illuminated FP-LUX F-PN WX Non-Illuminated FP-UX F-PX Illuminated FP-LUX F-AECUCU F-AECUCU F-PN WX Non-Illuminated FP-UX F-PX Illuminated FP-LUX F-AECUCU F-AECUCU F-PN WX Non-Illuminated FP-UX F-PX Illuminated FP-LUX F-AECUCU F-AECUCU F-PN WX Non-Illuminated FP-UX F-PX Illuminated FP-LUX F-AECUCU F-AECUCU F-PN WX Horizontal Mounting Non-Illuminated FP-UX F-PX F-AECUCU F-AECUCU Illuminated FP-LUX F-PN WX Non-Illuminated FP-UX F-PX F-AECUCU F-AECUCU Illuminated FP-LUX F-PN WX Non-Illuminated FP-UX F-PX Illuminated FP-LUX F-AECUCU F-AECUCU F-PN WX Non-Illuminated FP-UX F-PX Illuminated FP-LUX F-AECUCU F-AECUCU F-PN WX Non-Illuminated FP-UX F-PX Illuminated FP-LUX F-AECUCU F-AECUCU F-PN WX Non-Illuminated FP-UX F-PX Illuminated FP-LUX F-AECUCU F-AECUCU F-PN WX Select for V AC/DC or for V AC For V AC/DC units, add V for low voltage contact blocks Example: Cat No F-PX becomes Cat No F-PXV Electrical interlock cannot be performed within the pendant enclosure Mechanical interlock is not allowed - wwwabcom/catalogs Preferred availability cat nos are bold Publication A-CAA-EN-P
5 ul F Pilot Lights Monolithic ul F Potentiometer Operators Product Selection Lens Color Lamp Voltage Cat No Green Red Yellow lue Clear ul F Hole Plug V AC/DC FD-PN V AC FD-PN V AC/DC FD-PN V AC FD-PN V AC/DC FD-PN V AC FD-PN V AC/DC FD-PN V AC FD-PN V AC/DC FD-PN V AC FD-PN Resistive Element (Ω) Cat No FP-POT FP-POT FP-POT FP-POT FP-POT FP-POT Only available in Position for a -hole enclosure, Positions and/or for a -hole enclosure, Positions and/or for a -hole enclosure, and positions and/or for a -hole enclosure No latches are required Color lack plastic Cat No F-N -, -, and -Speed Contact lock Assemblies Cat No FC-ALP Cat No F-ALP Operator Type Interlock Type Composite Cat No -speed -speed -speed Latch Cat No Separate Catalog Numbers Contact lock Location Cat No No interlock F-PXE F-ALP Electrical interlock F-PXC F-ALP F-X Mechanical interlock F-LXC FC-ALP Electrical & mechanical interlock F-LXC FC-ALP F-X No interlock F-PXC F-ALP Electrical interlock F-PXC F-ALP F-X Mechanical interlock F-LXC FC-ALP Electrical & mechanical interlock F-LXC FC-ALP F-X No interlock F-PXC F-ALP F-XN Mechanical interlock F-LXC FC-ALP F-XN (Speed ) Contact blocks come preassembled onto latch For proper operation, Cat No F-XM must be mounted in position of either the mechanical or standard latch When ordering separate components, two pieces of each contact block must be ordered, one for each operator Contact lock Location Cat No Contact lock Location Cat No F-XE F-XN (Speed ) F-XE (Speed ) F-XE (Speed ) F-XM (Speed ) wwwabcom/catalogs Preferred availability cat nos are bold Publication A-CAA-EN-P -
6 Catalog Number Explanation Catalog Number Explanation Configured Pendant Stations FC a b b c c d d e e f f g g h h j j k k Pos Pos Pos Pos Pos Pos Pos Pos Pos - -hole - -hole Note: A code from Tables b k and b k must be specified for each operator to create a valid cat no Voltage Legend Plate a Enclosure -Hole -Hole -Hole -Hole V AC/DC No V AC V AC/DC A C E G Yes V AC D F H Only available in position of a -hole enclosure and in positions & of a - -hole enclosure Monolithic style device provided For a -hole enclosure, when a mechanical interlock (c & d = M or ) is selected with a - -speed operator, the black operator will be located in position of the enclosure and the opposite white operator will be placed in position of the enclosure (Example: AMAFM or DMUM) For a --hole enclosure, when a mechanical interlock (b k = M or ) is selected with a - -speed operator, the white operator will be located in position X of the mechanical interlock and the opposite black operator will be placed in position X+ of the mechanical interlock (Example: AFMAM or UMDM) Interlock and/or rubber boot selection = N (no interlock, no additional boots) is not allowed Interlock and/or rubber boot selection = E (electrical interlock, no additional boots) is not allowed Interlock and/or rubber boot selection = M (mechanical interlock) is not allowed Interlock and/or rubber boot selection = (electrical and mechanical interlock) is not allowed Interlock and/or rubber boot selection = R (no interlock, additional rubber boot) is not allowed Interlock and/or rubber boot selection = S (electrical interlock, additional rubber boot) is not allowed Only available in position for a -hole enclosure, positions and/or for a -hole enclosure, positions and/or for a -hole enclosure, and positions and/or for a -hole enclosure For proper installation, a trim washer or Cat No F-_ legend plate must be installed with this operator N E M R S b k Interlock and/or Rubber oot No interlock, no additional boots Electrical interlock, no additional boots Mechanical interlock, boots standard Electrical and mechanical interlock, boots standard No interlock, additional rubber boot Electrical interlock, additional rubber boot b k Operator Type Single Speed Operators for use with Mechanical Interlock A lack operator (no text or symbol) lank A lack operator with arrow (reverse down/left) O/H CRANE, AD lack operator with arrow (down) LIFT, DOWN AL lack operator with arrow (left) HOIST, LEFT A White operator (no text or symbol) lank AF White operator with arrow (forward up/right) O/H CRANE, AR White operator with arrow (right) HOIST, RIGHT AU White operator with arrow (up) LIFT, UP Fast Single Speed Operators for use with Mechanical Interlock D DD DL DF DR DU lack operator with double arrow (reverse fast down/left) lack operator with double arrow (down fast) lack operator with double arrow (left fast) White operator with double arrow (forward fast up/right) White operator with double arrow (right fast) White operator with double arrow (up fast) O/H CRANE,, LIFT, DOWN O/H CRANE, LEFT O/H CRANE,, O/H CRANE, RIGHT LIFT, UP Two-Speed Operators for use with Mechanical Interlock lack operator (no text or symbol) lank lack operator with arrow (reverse down/left) - SPEED, O/H CRANE, D lack operator with arrow (down) - SPEED, LIFT, DOWN L lack operator with arrow (left) - SPEED, HOIST, LEFT White operator (no text or symbol) lank F White operator with arrow (forward up/right) - SPEED, O/H CRANE, R White operator with arrow (right) - SPEED, HOIST, RIGHT U White operator with arrow (up) - SPEED, LIFT, UP Three-Speed Operators for use with Mechanical Interlock C lack operator (no text or symbol) lank C lack operator with arrow (reverse down/left) -- SPEED, O/H CRANE, CD lack operator with arrow (down) -- SPEED, LIFT, DOWN CL lack operator with arrow (left) -- SPEED, HOIST, LEFT C White operator (no text or symbol) lank CF White operator with arrow (forward up/right) -- SPEED, O/H CRANE, CR White operator with arrow (right) -- SPEED, HOIST, RIGHT CU White operator with arrow (up) -- SPEED, LIFT, UP - wwwabcom/catalogs Preferred availability cat nos are bold Publication A-CAA-EN-P
7 MT ME MK MM MG b k, continued Operator Type Emergency Stop Operators Red operator twist-to-release Illuminated red operator twist-to-release Red operator keyed twist-to-release Red operator twist-to-release/push-pull Red operator with guard twist-torelease/push-pull Not provided Standard Extended Push uttons Non-Illuminated E lack operator (no text or symbol) lank ED lack operator with arrow (down) LIFT, DOWN EL lack operator with arrow (left) HOIST, LEFT E lack operator with arrow (reverse down/left) O/H CRANE, FD lack operator with double arrow (down fast) LIFT, DOWN FL lack operator with double arrow (left fast) O/H CRANE, LEFT F lack operator with double arrow (reverse fast down/left) O/H CRANE,, E White operator (no text or symbol) lank EU White operator with arrow (up) LIFT, UP ER White operator with arrow (right) HOIST, RIGHT EF White operator with arrow (forward up/right) O/H CRANE, FU White operator with double arrow (up fast) LIFT, UP FR White operator with double arrow (right fast) O/H CRANE, RIGHT FF White operator with double arrow (forward fast up/right) O/H CRANE,, E Green operator (no text or symbol) lank EQ Green operator with Start/Alarm symbol START, ALARM EN Green operator with Start symbol START E Red operator (no text or symbol) lank ES Red operator with Stop symbol STOP E Yellow operator (no text or symbol) lank EA Yellow operator with Alarm symbol ALARM E lue operator (no text or symbol) lank R lue operator with R RESET Standard Extended Push uttons Illuminated L Green operator (no text or symbol) lank L Red operator (no text or symbol) lank L Yellow operator (no text or symbol) lank L lue operator (no text or symbol) lank L Clear operator (no text or symbol) lank SH KH SJ KJ -position -position Selector Switches Standard-maintained Keyed-maintained Standard-maintained Keyed-maintained Note: Footnote explanations on previous page O-I I-O-II VV VW VX WV WW WX XV XW XX YV YW YX Catalog Number Explanation b k, continued Operator Type - Function Multi-Operator Push uttons lack/white operator with arrow (down & up) lack/white operator with arrow (left & right) lack/white operator with arrow (reverse & forward) lack/white operator, illuminated, with arrow (down & up) lack/white operator, illuminated, with arrow (left & right) lack/white operator, illuminated, with arrow (reverse & forward) lack/white operator with double arrows (down fast & up fast) lack/white operator with double arrows (left fast & right fast) lack/white operator with double arrows (reverse fast & forward fast) lack/white operator, illuminated, with double arrows (down fast & up fast) lack/white operator, illuminated, with double arrows (left fast & right fast) lack/white operator, illuminated, with double arrows (reverse fast & forward fast) Pilot Lights Not provided P Amber LED lank P Green LED lank P Red LED lank P Yellow LED lank P lue LED lank P Clear LED lank Potentiometers P lack operator Ω lank P lack operator Ω lank P lack operator Ω lank P lack operator Ω lank P lack operator Ω lank P lack operator Ω lank Hole Plug N lack hole plug lank N E M R S b k Interlock and/or Rubber oot No interlock, no additional boots Electrical interlock, no additional boots Mechanical interlock, boots standard Electrical and mechanical interlock, boots standard No interlock, additional rubber boot Electrical interlock, additional rubber boot wwwabcom/catalogs Preferred availability cat nos are bold Publication A-CAA-EN-P -
8 Accessories Accessories Engraved Legend Plates Vertical Horizontal LIFT DOWN LIFT DOWN Cat No F-VE L I F T D O W N L I F T Cat No F-HE Cat No Cat No lank F-E -- SPEED, O/H CRANE, D O W N F- E O-I F- U -- SPEED, O/H CRANE, F- E I-O-II F- U ALARM F- E RESET F- E HOIST, LEFT F- E START F- E HOIST, RIGHT F- E STOP F- E LIFT, DOWN F- E - SPEED, HOIST, LEFT F- E LIFT, DOWN F- E - SPEED, HOIST, RIGHT F- E LIFT, UP F- E - SPEED, LIFT, DOWN F- E LIFT, UP F- E - SPEED, LIFT, UP F- E O/H CRANE, F- E - SPEED, O/H CRANE, F- E O/H CRANE,, F- E - SPEED, O/H CRANE, F- E O/H CRANE, LEFT F- E -- SPEED, HOIST, LEFT F- E O/H CRANE, F- E -- SPEED, HOIST, RIGHT F- E O/H CRANE,, F- E -- SPEED, LIFT, DOWN F- E O/H CRANE, RIGHT F- E -- SPEED, LIFT, UP F- E START, ALARM F- E Custom text F- E For vertically mounted operators, add a V to the cat no Example: Cat No F- E becomes Cat No F-VE For horizontally mounted operators, add an H to the cat no Example: Cat No F- E becomes Cat No F-HE Font code (K, S, L) must be selected from the following table Please fill in the custom text fax sheet found on page to ensure accuracy of legend plate engraving Line Line Line Line Line Line Line Line Vertical Mounting (V) Horizontal Mounting (H) Font Size Max Characters Per Line Max No of Lines Max Characters Per Line Max No of Lines K (small) S (standard) L (large) - wwwabcom/catalogs Preferred availability cat nos are bold Publication A-CAA-EN-P
9 Accessories Pkg Quantity Cat No Plastic mounting latch F-ALP Mechanical interlock latch FC-ALP Replacement wire guide FC-AWG Replacement trim washer F-ATW Insulated side jumper -SJA- -SJA- Hole plug F-N Type Pkg Quantity Cat No Contact block NO NC NO low voltage QuadCONNECT NC low voltage QuadCONNECT NCE NOEM NOLM F-X F-X F-XV F-XV F-X F-XE F-XN NOEEM F-XM -hole (M x ) FC-AS Cable sleeve - -hole (M x ) FC-AS Protective boot Extended push button F-AE -position multi-operator F-AU Narrow plastic guard Yellow F-AMEGY V AC/DC F-Nx Integrated LED module V AC F-Nx Only for use with -, -, and -speed operators First contact closure of - and -speed operators Second contact closure of -speed operators and third contact closure of -speed operators First contact closure of -speed operators For proper operation, Cat No F-XM must be mounted in position of the mechanical or standard latch Not for use with -, -, and -speed operators To complete the cat no, replace the x with one of the following letters for the desired color: Y = Amber, R = Red, G = Green, = lue, W = White Wire guides are provided with enclosures wwwabcom/catalogs Preferred availability cat nos are bold Publication A-CAA-EN-P -
10 Specifications Specifications Front-of-Panel (Operators) Vibration (assembled to panel) Shock Degree of protection Mechanical durability per EN -- (Annex C) Operating forces (typical with one contact block) Operating torque (typical application with one contact block) Mounting torque Temperature range (operating) Temperature range (short term storage) Humidity Mechanical Ratings Plastic (ulletin FP) Tested at Hz, mm displacement (peak-to-peak) max/ G max for hr duration, no damage Tested at / cycle sine wave for ms; no damage at G IP (Type /X/) Cycles Momentary push buttons Cycles Multi-function, selector switch, key selector switch Cycles Twist-to-release E-stop, illuminated push-pull E-stop, alternate action push buttons Cycles Potentiometer, toggle switch Environmental Flush/extended = N, E-stop = N Selector switch = N m ( lb in) N m ( lb in) - + C (- + F) - + C (- + F) % RH from C ( F) Performance Data see page Important- of the Industrial Controls catalog Plastic keyed operators are IP, Type /; not Type X Operating temperatures below C ( F) are based on the absence of freezing moisture and liquids, UL Recognized to C ( F) - Incandescent module max C ( F) - fully populated -hole pendant enclosure C ( F) with C wire Note: Use UL Listed type S or SJ cords, with a smooth outer jacket rated for wet locations use (marked W) and oil resistant outer covering (marked O) such as SOW or SJOW with copper wire, rated C min, AWG, with an overall OD of mm for the small cable sleeve (Cat No FC-AS) and mm for the large cable sleeve (Cat No FC-AS) Material Listing Component For Use with Material Used Panel gasket All operators Nitrile, TPE Diaphragm seal Illuminated push button, non-illuminated push button K-seal Selector switch, key selector switch, push/twist-to-release E-stop, key E-stop Nitrile Diaphragm retainer, return spring I Illuminated push button, non-illuminated push button Stainless steel Return spring II Selector switch, key selector switch, alternate action, push/twist-to-release E-stop, key E-stop Automotive industry acceptable silicone Zinc-coated music wire utton cap Non-illuminated push button, push/twist-to-release, E-stop, key E-stop, multi-function PT/polycarbonate blend -color molded button cap Non-illuminated push button PT/polycarbonate blend Lens Multi-function Acetal Lens, knob Illuminated push button Polyamide Knob Non-illuminated selector switch Glass-filled polyamide Plastic bezel/bushing I Non-illuminated push button, illuminated push button, selector switch, key selector switch, push/twist-to-release E-stop, key E-stop, multi-function Glass-filled polyamide Plastic bezel/bushing II Pilot light Glass-filled PT Diffuser Illuminated push button, pilot light Polycarbonate Plastic mounting ring All plastic operators Glass-filled polyamide Plastic latch Glass-filled polyamide Mechanical interlock latch Glass-filled polyamide Plastic enclosure PT/polycarbonate blend Terminal screws LED module, contact blocks Zinc-plated steel with chromate Terminals LED module, contact blocks rass with silver-nickel contacts Housing LED module Glass-filled polyamide Low-voltage terminals Low-voltage spanner Contact blocks Contact blocks Gold-plated silver-nickel contacts Gold-plated silver-nickel contacts Spanner Contact blocks rass with silver-nickel contacts oot Illuminated push button, non-illuminated push button, multi-function illuminated and non-illuminated Automotive industry acceptable silicone - wwwabcom/catalogs Preferred availability cat nos are bold Publication A-CAA-EN-P
11 Specifications ack-of-panel Components Standard contact block ratings Low voltage contact block ratings LED Module Ratings V AC V DC V AC V AC wwwabcom/catalogs Electrical Ratings Preferred availability cat nos are bold Publication A-CAA-EN-P A, Q V AC AC, DC to IEC/EN -- and UL, V, ma min V, ma DC min C, R, AC, DC to EN -- and UL Nominal Voltage Range Current Draw Frequency V AC V DC V AC V AC ma ma ma ma Thermal current A max enclosed ( C ambient) to UL, EN -- Insulation voltage (U i ) Wire capacity (screw terminal) Wire capacity (spring-clamp terminal) Recommended tightening torque on screw terminals Dielectric strength (minimum) External short circuit protection Electrical shock protection Vibration (assembled to panel) Shock Standard blocks Contact durability per EN -- (Annex C) Contact operation Low voltage contact blocks NO NC NOEM NCL NCE NOEEM NOLM Standard push button travel to change electrical state Multi-speed push button travel to change electrical state Operating forces (typical) LED Dominant Wavelength LED Luminous Intensity Springs Electrical contacts Terminals Single-circuit contact block Dual-circuit contact block Green Red Yellow lue White Green Red Yellow lue White Standard Low voltage Screw Spring-clamp Performance Data see page Important- of the Industrial Controls catalog Low voltage contacts are recommended for applications below V, ma Wires less than # AWG ( mm) may not hold in terminal securely Screw terminal = V, spring-clamp = V # AWG ( mm) Max () # AWG or () # AWG / Hz DC / Hz / Hz # AWG ( mm) One per spring clamp, two spring clamps per terminal Mechanical Ratings N m ( lb in) V for one minute A type gl/gg cartridge fuse to EN -- or gn (Class J to UL - or Class C to UL -) A type gl/gg cartridge fuse to EN -- or gn (Class J to UL - or Class C to UL -) Finger-safe conforming to IPX Tested at Hz, mm displacement (peak-to-peak) max/ G max hr Tested at / cycle sine wave for ms and no damage at G max NC and NOEM NO and NCL NOEEM NCE NOLM Illumination Materials cycles Slow double make and break Slow double make and break positive opening Double break / double make, early make Double break / double make, late break positive opening Double break / double make, early break positive opening Double break / double make, early early make Double break / double make, late make N N nm nm nm nm mcd mcd mcd mcd mcd mm ( in) mm ( in) mm ( in) mm ( in) mm ( in) Stainless steel and zinc coated music wire Silver-nickel Gold-plated over silver rass Silver-plated brass -
12 Approximate Dimensions Approximate Dimensions ul FC -, -, and -Speed Operator ul FC Legend Plate ul FC Pendant Station (-Hole) ul FC Pendant Station (-, -, and -Hole) Cat No No of Holes A FC-//C/D FC-//E/F FC-//G/H A For ul F operator dimensions, see page - - wwwabcom/catalogs Preferred availability cat nos are bold Publication A-CAA-EN-P
13 Fax/Scan Sheet Custom Text Fax/Scan Sheet Order/Item Vertical Mounting Horizontal Mounting Cat No F-VEK Cat No F-HEK Cat No F-VES Cat No F-HES Cat No F-VEL Cat No F-HEL wwwabcom/catalogs Preferred availability cat nos are bold Publication A-CAA-EN-P -
The Superior Choice for Material Handling Equipment 22.5 mm 800FC
The Superior Choice for Material Handling Equipment 22.5 mm 800FC PENDANT STATIONS 3 HOLE ENCLOSURE 800FC-3Z 5 HOLE ENCLOSURE 800FC-5Z 7 HOLE ENCLOSURE 80FC-7Z 9 HOLE ENCLOSURE 800FC-9Z Position 1 * Position
More information800T T2 H2 E E X X. a b c d e f g Right Left Right Left. d, e, f, g. c (cont'd) 1-, 2-, 3-, 4-Way Toggle Switches (Bul. 800T only)
1-,, 3-, 4- Toggle Switches (Bul. 800T only) 800T T2 H2 E E X X a b c d e f g Right Left Right Left Blank C T1 T2 T3 T4 a Finger-Safe Guards Description No guards Guards on terminals b Operator Type Description
More informationBulletin 800H Hazardous Location Push Buttons Product Overview/Specifications. Table of Contents See below.
Bulletin H Product verview/specifications Bulletin H/ Hazardous locations push buttons and stations Classes I, II & III Divisions & / in. - NPSM barrel Type & Explosion-proof operators Table of Contents
More informationM = Maintained S = Spring Return. Operator Only ➊ No Contacts M M 800T-00HX2KB6 M M 800T-24HR2KB6AX 800T-24HR17KB6AX Incandescent
ulletin 800T 30.5 mm Push uttons 2-Position Knob/Lever Type Selector Switch Units, Illuminated Operator Position Operator Type Standard Knob Knob Lever Type Lamp Volts olor M = Maintained S = Spring Return
More informationTable of Contents. 22mm Push Buttons. 30mm Metal Push Buttons. 22mm Plastic Enclosures, Control Boxes & Installation Instructions 30-35
Altech Corporation Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced staff
More informationControl stations and enclosures Pendant control stations, for control circuits Double insulated or metal, types XAC-B and XAC-M
Characteristics Pendant control stations, for control circuits Environment Conforming to standards IEC 947-5-1, EN 60947-5-1 XAC-B : standard version : NEMKO, CSA 300 V type 4 Approvals XAC-M : standard
More informationPendant control stations 6
Characteristics 6 Environment Conformity to standards IEC 97-5-1, EN 6097-5-1 Product certifications NEMKO. Special version: UL Listed A600-Q600, CSA A600-Q600 Protective treatment Standard version TH
More informationPendant control stations 6
Characteristics Pendant control stations For control circuits Environment Conformity to standards EN/IEC 0--, CSA C- n Product certiþ cations XAC B Standard version: CSA 00 V type XAC M Standard version:
More informationFM series position switches
FM series position switches Selection diagram 0 08 0 A A 0 A 0 External rubber gasket External rubber gasket External rubber gasket External rubber gasket 0 69 Round rod, stainless steel Square rod Glass
More informationRound Indicator Lights Mounting Hole Page
PRODUCT SERIES Round Indicator Lights Page 8, &. 9. &..7 - NEMA -R.7 8 & 9. 7. 8. 9 7. 8. - NEMA -R.9.9 Indicator Lights.7,.. 7. Rectangular Indicator Lights Panel Cutout. x.. x. 7 & 7. x.8 8. x. 9 & 7.
More informationPendant control stations 6
Characteristics 6 For control circuits Environment Conformity to standards EN/IEC 6097-5-1, CSA C22-2 n Product certifications XAC B Standard version: CSA 300 V type XAC M Standard version: CSA 300 V type
More informationControl Stations ø 22
Control Stations ø 22 CONTROL STATIONS - NON-ILLUMINATED Technical Info (p. 103) MUSHROOM HEAD Ø 40 - MAINTAINED Push-turn to reset Part Number M16/20 47.9 25.7 Ø 40 Red NC EMERGENCY STOP LBX10510 Red
More informationComplete units: Mushroom heads ø 22mm
Complete units: Mushroom heads ø 22mm MAINTAINED - NON-ILLUMINATED Ø 40 MUSHROOM Push-pull to reset Technical Info (p. 103) Black Bezel Part Number 34.2 Ø 40 Red NC L22DD01-3E01 Red 2 NC L22DD01-3E02 Red
More informationComplete units: Push-buttons ø 22mm
Complete units: Push-buttons ø 22mm FLUSH SPRING RETURN - NON-ILLUMINATED Chrome Bezel Part Number Technical Info (p. 103) Black Bezel Part Number 11 Ø 29.9 20.1 19.6 With single position clip Red NC L21AA01-1E01
More informationLR Position Switches TECHNICAL DATASHEET
TECHNICA DATASHEET Position Switches Technopolymer housing, one conduit entry Protection degree IP6 according to EN 69 contact blocks available actuators available M assembled connector versions Silver
More informationOperator Heads: ø 22mm
Operator Heads: ø 22mm ONE-PIECE PILOT LIGHTS Technical Info (p. 103) SUPPLIED WITHOUT BULB Part Number L20SA40 14.3 44.1 Ø 29.8 Ø 20.2 Ø 22 Ø 29.5 1 to 6 6 Ribbed Lens Clear Smooth Lens With text or symbol
More informationComplete units: Selector switches ø 22mm
Complete units: Selector switches ø 22mm SELECTOR SWITCHES - NON-ILLUMINATED Technical Info (p. 13) WITH KNOB 2 and 3 positions Chrome Bezel Part Number Black Bezel Part Number Ø 29.9 Maintained positions
More informationPosition switches FM series
B Position switches FM series Selection diagram 0 08 0 A A 0 A 0 external rubber gasket external rubber gasket external rubber gasket external rubber gasket 69 stainless steel round rod square rod fiber
More informationE3S-CR62/67. Ideal for detecting transparent glass and plastic containers. Transparent bottle sensor. Features
bottle sensor Ideal for detecting transparent glass and plastic containers Features Stable operation even if container interval is shortened for higher productivity. Stable detection of 5 mm gaps that
More informationSafety switches with slotted hole lever
Safety switches with slotted hole lever Selection diagram C1 C C C4 C5 Straight slotted hole lever Slotted hole lever at the left Slotted hole lever at the right (without bend) Slotted hole lever at the
More informationOperator Heads: ø 22mm
Operator Heads: ø 22mm SPRING RETURN - NON-ILLUMINATED Technical Info (p. 103) FLUSH-FLUSH Twin touch Chrome Bezel Part Number Black Bezel Part Number 12.3 11 53.9 29.9 With International Symbols Green
More informationDetecting Devices. 8/2 Introduction
Detecting Devices /2 Introduction /4 General data / 3SE5, plastic enclosures /16 3SE2, plastic enclosures /22 3SE5, metal enclosures /30 3SE2, metal enclosures /39 3SE3, metal enclosures Compact design
More informationA W - A 2A R - 24D - 1
Knob-type Selector Switch A165S/W Mounting Aperture of 16 mm Modular construction Oil-resistant IP65 models UL and cul approved. Conforms to EN60947-5-1, IEC947-5-1 Short mounting depth, less than 28.5
More informationDatasheet - ZQ N
20.07.2016-17:41:15h Datasheet - ZQ 900-13N Pull-wire emergency stop switches / ZQ 900 Preferred typ Metal enclosure one-side operation / wire up to 75 m long Release push button Position indicator Robust
More informationRelays & Sockets RU Series Universal Relays. With Latching or Momentary Lever. Standard (without lever) Key features:
RU Series Universal Relays Key features: Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator
More informationSeparate units: Blocks
Separate units: Blocks LED BLOCKS Technical Info (p. 103) SCREW TERMINALS Part Number 3.8 LED 19.7 20.1 X1 X2 33EARL 9.9 19.7 21.5 18.2 12/24 V White Red Green Blue Yellow 33EAWL 33EARL 33EAGL 33EABL 33EAYL
More informationLabel Sensor. Ordering Information. Application Example E3S-CD68/CD63. Ideal for Detecting Labels on Bottles. E3S-CD68/CD63 Label Sensor
Ideal for Detecting Labels on Bottles Satisfies the requirements of IP67. Ensures a vibration resistance of 10 Hz to 2 khz and a shock resistance of 1,000 m/s 2 (approximately 100G). Incorporates an NPN
More informationHMI Components. Series. Raised design PCB (with adaptor) Machinery and Automation. Indicator Illuminated pushbutton
Edition 10/2016 HMI Components 41 Series Characteristics The rectangular design of the Series 41 (18 x 24 mm) makes it especially suited: Raised design PCB (with adaptor) Functions The Series 41 incorporates
More informationand signalling units Ø 22 1 Harmony XB7 Monolithic pushbuttons, switches and pilot lights
Characteristics 1 Environment Protective treatment Standard version TH Ambient air temperature Storage C - 40 + 70 around the device Operation C - 25 + 70 for LED and neon bulb versions - 25 + 40 for incandescent
More informationOperating mode. distance. 7 m Light ON Dark ON (selectable) 2 m [100 mm] (See note 1.) 100 mm (wide view)
Built-in Amplifier Photoelectric Sensor E3S-A/B Revolutionary High-performance High-quality Sensor with Built-in Amplifier can be adjusted in seconds because the optical axis coincides with the mounting
More information1.3. Pushbuttons and Indicating Lights.
.3 Pushbuttons and Indicating Lights Pushbutton Control Stations Contents Page Features.............................. V7-T-5 Product Selection M22 Assembled Control Stations........ V7-T-6 Commercial Control
More informationBulletin 800R 30.5 mm Push Button Stations Hermetically Sealed for Division 2/Zone 2
30.5 mm Stations Hermetically Sealed for Division 2/Zone 2 10 Bulletin 800R Hazardous Location Stations Classes I and II Division 2/Zone 2 30.5 mm Mounting Hole Types4/13and4/4X/13 0 TABLE OF CONTENTS
More informationData sheet E-DAT Industry RJ45 field plug black Cat.6 Class E A
Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification multi-port Cat.6 class E A plug to be assembled in the field compliance with class E A to ISO/IEC 11801
More informationOPENETICS. P/N E-DAT Industry RJ45 field plug insert Cat.6A. Specialist Manufacturer Voice Data Security.
Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification Cat.6 class E A plug to be assembled in the field and mounted in IP67 plug housings of variants 1, 4,
More informationPosition switches FR series
B Position switches FR series Selection diagram 0 A 0 0-0 A A 0 A external rubber gasket external rubber gasket for electrical panels external rubber gasket external rubber gasket external rubber gasket
More information60 Series - General purpose relays 6-10 A. Features Plug-in mount 10 A General purpose relay
Series - General purpose relays - 0 A Features Plug-in mount 0 A General purpose relay.. & pole changeover contacts Cadmium Free contacts (preferred version) AC coils & DC coils UL Listed (certain relay/socket
More informationDetecting Devices. 8/2 Introduction
Siemens AG 29 Detecting Devices /2 Introduction 3SE5, 3SE2, 3SE3 Position Switches /4 General data /11 3SE5, plastic and metal enclosures /2 3SE2, plastic enclosures /26 3SE2, metal enclosures /36 3SE3,
More informationAuxiliary Contact (10 600V) Auxiliary Contact (10 5V DC)
Bulletin C,, C Accessories Accessories Auxiliary Contacts Contactors are supplied with one normally open and one normally closed auxiliary contact (A rating) as standard. Additional auxiliary contacts,
More informationGeneral-Purpose Photoelectric Sensor
General-Purpose Photoelectric Sensor Wide Selection of High Performance Small DC Sensors Offers Longer Sensing Distances Fast 0. msec response time for high-speed sensing Extended sensing distances up
More informationConnections Appearance Sensing method Sensing distance Operating mode Model Plug-in connector Horizontal Through-beam 30 m Light-ON
Heavy-duty Plug-in Photoelectric Sensor Water-resistive Photoelectric Sensor with Metal Housing & Plug-in Connector Ensuring Long Sensing Distance Satisfies the requirements of IP67, and NEMA6P. Ensures
More informationData sheet E-DAT Industry RJ45 field plug insert Cat.6 Class E A
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification Cat.6 class E A plug to be assembled in the field and mounted in IP67 plug housings of variants
More informationAmphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics
Amphenol C 1-1 / C 1- Circular Circular Connectors Connectors Amphenol-Tuchel Electronics C 1-1 Overview No. of contacts + PE + PE Termination screw solder Wire gauge Rated insulation voltage Current carrying
More informationPhotoelectric Sensor
Photoelectric Sensor Revolutionary High-performance High-quality Sensor with Built-in Amp can be adjusted in seconds because the optical axis coincides with the mounting axis. Highly visible spot on white
More informationOvertravel of 3.5 mm max. Power source DC D5C-1DS0 D5C-1DP0 D5C-1DA0 AC D5C-1AS0 D5C-1AP0 D5C-1AA0 Antenna only D5C-00S0 D5C-00P0 D5C-00A0
Touch Switch Unique 18 mm Capacitive Touch Switch with Choice of Three Actuators is Activated with Only a Very Slight Physical Contact Lightweight objects, such as thin wire or foil can be accurately detected.
More informationDigital flow ELEMENT transmitter for continuous flow measurement
ELEMENT Transmitter Digital flow ELEMENT transmitter for continuous flow measurement Type can be combined with... PN10, DN15 to DN400 fluidic process connection Programmable outputs : one or two transistor
More informationData sheet E-DAT Industry RJ45 plug black Cat.6 Class E A
Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification multi-port Cat.6 class E A plug compliance with class E A to ISO/IEC 11801 Ed.2.2:2011-06,
More informationLocal control stations for Zone 1 and Zone 21. Features. Description
Local control stations for Zone and Zone Local control stations for Zone and Zone Features The right size/material enclosure Optimum functionality thanks to the great variety of components Customised planning
More informationGeneral data. 13/20 Siemens IC Overview Front plate mounting
General data Overview Front plate mounting D C B E A F D NSD0_00029b B C A A B C D E F Actuator Front plate Holder Contact block Lampholder Support element For actuators see page /25 to /62. For contact
More informationAS-Interface Slaves. SIRIUS Pushbuttons and Indicator Lights. CustomAS-Interface enclosures 10/101
CustomAS-Interface enclosures Overview There are two types of custom solutions for AS-Interface: The front panel module and the SIRIUS 3SB3 enclosed stations. NC Contacts AS-Interface enclosure Ordering
More informationTNC SERIES General... 4 Interface... 5 Characteristics...6-7
CONTENTS PAGE TNC SERIES General... 4 Interface... 5 Characteristics...6-7 TNC 50 Ω SERIES Plugs...8-9 Jacks...0- Jacks and receptacles... Receptacles...-4 Adapters... 5 Caps... 6 TNC 75 Ω SERIES Plugs...
More informationMINIATURE RELAY FOR WIDER APPLICATIONS
TÜV Rheinland HJ MINIATURE RELAY FOR WIDER APPLICATIONS HJ RELAYS FEATURES contact arrangements Form C (for A 0 V AC), Form C (for 0 A 0 V AC)* Excellent contact reliability by Au plating Environmentally
More informationDigital flow ELEMENT transmitter for continuous flow measurement
Digital flow ELEMENT transmitter for continuous flow measurement Type 8036 can be combined with... DN06 to DN65 fluidic process connection Programmable outputs : one or two transistor output(s) and single
More informationSERIESN50, COAXIAL CONNECTORS
SERIESN50, COAXIAL CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER N connectors are available with 50 and 75 impedance. The frequency range extends to 18 GHz, depending on the connector and cable type.
More informationInductive Proximity Sensor
Inductive Proximity Sensor Linear Proximity Sensor with High-accuracy Resolution Resolution is 0.05% of the maximum sensing distance. The model with a sensing distance of 1.2 mm ensures a resolution of
More informationIDEC LUMIFA Family LED Lighting Solutions
IDEC LUMIFA Family LED Lighting Solutions LUMIFA Lighting your way For over two decades, IDEC has produced LEDs for applications requiring indicator lights and signaling towers. Which is why it was a natural
More informationConnect - Contact - Control. Connectors. Short Form Catalogue
Connect - Contact - Control Connectors Short Form Catalogue Components for electrical engineering Schaltbau connectors nowadays ensure good connections in all areas of electrical engineering. The product
More informationDIN 22.5/17.5 Size Lineup of A Wide Range of Measuring and Monitoring Relays. Model Number Structure
New Product News Measuring & Monitoring Relays K8AK/K8DS Series DIN 22.5/17.5 Size Lineup of A Wide Range of Measuring and Monitoring Relays Compact 22.5 mm and 17.5 mm housings Resistant to high-frequency
More information(1,5 modules per pole)
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 DX 3 MCB 25kA 80A to 125A CONTENTS PAGES 1. Description - Use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
More informationRE17RCMU off-delay timing relay - 1 s..100 h V AC - 1 OC
Characteristics off-delay timing relay - 1 s..100 h - 24..240 V AC - 1 OC Main Range of product Product or component type Discrete output type Width Device short name Time delay type Time delay range Nominal
More informationMODEL: M2VF MODEL: M2VF [1][2] [3][4]
Super-mini Signal Conditioners Mini-M Series SIGNAL TRANSMITTER (high speed response) Functions & Features Converts DC input from a sensor into a standard process signal Isolation between input and output
More informationRE17RAMU on-delay timing relay - 1 s..100 h V AC - 1 OC
Characteristics on-delay timing relay - 1 s..100 h - 24..240 V AC - 1 OC Main Range of product Product or component type Discrete output type Width Device short name Time delay type Time delay range Nominal
More informationSmall-sized, plastic type, push-pull lock connectors
Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved
More informationE3X-NL. Employs OMRON's Unique Free Angle Optics Technology for Detecting Minute Differences in Glossiness. Optical Fiber Glossy Object Sensor
Authorised Distributors:- AS & AAIN INDIA PVT TD S-1, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-112(India) Tel : 11-43797575 Fax : 11-43797574 E-mail : sales@ashalain.com Fiber Glossy Object
More informationE3S-CL. Distance setting photoelectric sensor in metal housing. Features
Distance setting photoelectric sensor in metal housing High water, oil and detergent resistance Minimal black/white error for highest reliability detecting different colored objects () Features Eliminates
More informationø30 ARN/ARNS Series Mono-lever Switches Switches
ø0 ARN/ARNS Series Mono-lever Switches Switches Single lever offers up to four directions of control Mono-lever switches operate in four directions using a single lever. Switch contacts are actuated in
More informationMicro-Change. Cordset Family
Side Tab Cordset Family Small Space? Big Solution. When space and time are in short supply, look no further than Brad Harrison brand for the best, ready-made m connector solutions. For fast, compact migration
More informationMK-S (New Models) General-purpose Relays. New Super MK Relays. Models with Latching Lever Added to the Series. Features. Model Number Structure
General-purpose Relays MK-S (New Models) CSM_MK-S_DS_E 1 New Super MK Relays. Latching Lever Added to the Series. Same mounting and internal wiring as the previous Super MK Relays Built-in mechanical indicator
More informationOpen Type Without Enclosure
Bulletin L NEMA AC Electrically Held Lighting Contactors Product Selection Top Wiring for Non-Motor and Lighting Loads Tungsten Lamp Loads (Max. V Line, V Load) Maximum Continuous Ampere Ratings [A] General
More informationEasy to replace. A pigtailed type sensor with connector (CY- -J), which is easy to replace, is also available. Environment resistant
EQ- VF NX PM PM MS-AJ RT-6 PX- PHOTOELECTRIC SENSORS Mounting Stand SERIES Cylindrical Photoelectric Test input PNP output Light intensity type available monitor M This sensor has an M size for convenient
More information1.7. Pushbuttons and Indicating Lights. Standards and Certifications UL Listed File No. E CSA Certified File No. LR68551
.7 Pushbuttons and Indicating Lights Contents escription 30.5 mm Square Multifunction Watertight/Oiltight E30 Product Identification.................... Product Selection Operators..........................
More informationDISCONNECT SWITCHES. UL Listed CSA Certified
POWER & ACTUATION ENCLOSED DISCONNECT SWITCHES When you need an at-motor non-fused disconnect switch with superior performance, look to c3controls. Our Series E2 Enclosed Disconnects feature 3- and 4-Pole
More information27/04/2015
Modular Carril DIN 35 mm HIL Part number 84871120 Control of AC and DC currents Automatic recognition of AC/DC Measurement ranges from 2 ma to 10 A Choice between over and undercurrent True RMS measurement
More informationZelio Control Measurement Relays
Selection Guide Application Voltage control Current control Functions 3-phase Single-phase and d.c. Integrated current transformer - Overvoltage and between phases - Overvoltage and between phases and
More informationEuroMag Series PCB Mount Terminal Blocks. EM3123 Series Euro-Mag Terminal Blocks 3.50 Centers; Modular. Part Numbering System
EuroMag PCB Mount Terminal Blocks EM.0 Centers; Modular Rating: A, 00V Center Spacing: 0. (.0mm) Wire Range: #1- AWG Housing Material: Black Polyamide Type /, V0 Screw Size: M.0 Chromate Steel Operating
More informationph or ORP Transmitter
ph or ORP Transmitter Programmable outputs: two transistor and single or dual analog 4-20 ma (Process + Temp) Removable backlighted display Universal process connection Compatible with 120 mm ph/ ORP probes
More informationLGH High Voltage Connectors
Introduction Product Facts No exposed high voltage parts Space saving maximum performance from small size and weight Fast connect and disconnect Wide temperature range -67 F to +257 F [-55 C to +5 C],
More informationE2F. Cylindrical Proximity Sensor in Plastic Housing. Applications. Ordering Information. Sensors. Accessories (Order Separately)
Cylindrical Proximity Sensor in Plastic Housing High quality full body plastic housing for high water proof requirements Polyarylate housing for light chemical resistance Applications Detection of bottle
More informationAccessories. Accessories
Series 61 16mm 22.5mm 21 x 21mm 21 x 27mm IP65 5 250V INDITOR PUSHUTTON E-STOP KEYLOK SELETOR hoose one component from each of the coloured sections to assemble a complete switch. For other options or
More informationRE17RMMW time delay relay 10 functions - 1 s..100 h V AC/DC - 1 OC
Characteristics time delay relay 10 functions - 1 s..100 h - 12..240 V AC/DC - 1 OC Main Range of product Product or component type Discrete output type Width Device short name Time delay type Time delay
More informationRE17RMMW time delay relay 10 functions - 1 s..100 h V AC/DC - 1 OC
Characteristics time delay relay 10 functions - 1 s..100 h - 12..240 V AC/DC - 1 OC Main Range of product Product or component type Discrete output type Width Device short name Time delay type Time delay
More informationTop wiring permanent magnet latching For non-motor loads, lighting, heating NEMA sizes to 300 A 2-, 3-, and 4-pole configurations
Bulletin LP NEMA AC Permanent Magnet-Latching Lighting Contactors Product Overview/Product Selection/Wiring Diagram A, -Pole Open Type without Enclosure Bulletin LP Top wiring permanent magnet latching
More informationRotary Measurement Technology Incremental Encoders
-20 to 60 C Temperature Shock/vibration resistant Short-circuit protection Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
More informationHeavy Duty Push-pull / RS422 / speed switch. RoHS 2/22. Magnetic field proof. XXXX e
Sendix H00 (shaft) The Sendix encoder H00 is an extremely rugged available in 3 versions: encoder with or without speed switch and double encoder. Thanks to the special HD-Safety-Lock construction it is
More informationTechnical Data. General specifications. Rated operating distance s n 3 mm
0102 Model Number Features Direct mounting on standard actuators Compact and stable housing with terminal compartment connection Fixed setting EC-Type Examination Certificate TÜV99 ATEX 1479X Usable up
More informationSB 50 Connectors - up to 120 amps
Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one
More informationCylindrical Photoelectric Sensor. 6. Connection F Sensing Distance. 100: 100 mm. 300: 300 mm 2M: 2 Meters 5M: 5 Meters. 5. Output NPN - NO, NC
Cylindrical Sensor Proximity SALIENT FEATURES Metal Housing AC 2wire- NO, NC DC 3 Wire- NPN, PNP DC Dual Output Models Upto 5 m sensing distance Diffuse, Retro, Through Beam Measurement Model Number Legend
More informationPUSHBUTTON SWITCH / SELECTOR SWITCH / ILLUMINATED PUSHBUTTON SWITCH PSA, LPSA TYPE
PUSHBUTTON SWITCH / SEECTOR SWITCH / IUMINATED PUSHBUTTON SWITCH PSA, PSA TYPE FEATURES 1 3 The PSA and SPSA types are oil-proof. The enclosure rating is IP65 (water-jet-proof type), covering wide applications.
More information.152 (3.86) KEYWAY DEPTH .033 (.84).066 (1.68) .550 DIA (13.97) MOUNTING SURFACE .350 (8.89) 3/8-32 UNEF-2A THREADS (19.71.
SERIES 61K High Resolution, 4-Pin FEATURES 25, 32, 50, 64, 100, 128 and 256 Cycles per Revolution Available Sealed Version Available Rugged Construction Cable or Pin Versions 10 Million Rotational Life
More informationSBS Connectors - up to 110 amps
Connectors - up to 1 amps NEW 75G 75X Wire to Wire The patented connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits.
More informationDatasheet Platinum Resistance Pt100 In-head (Push Button) Temperature Transmitter TX203P mA output, default range supplied C
Datasheet Platinum Resistance Pt100 In-head (Push Button) Temperature Transmitter TX203P - 4-20mA output, default range supplied 0-100 C ENGLISH The TX203P RTD in-head mounted temperature transmitter connects
More informationPower supply CP-D 24/4.2 Primary switch mode power supply
Data sheet Power supply CP-D 24/4.2 Primary switch mode power supply The CP-D range of modular power supply units in MDRC design (modular DIN rail components) is ideally suited for installation in distribution
More informationThe series terminals are state of the art based on technical enhancements, changes in power engineering, their applications and properties.
w TERMINALS SERIES IK6 GENERAL INFORMATION The series terminals are state of the art based on technical enhancements, changes in power engineering, their applications and properties. 402 Since series terminals
More informationDual Reversing Module
Dual Reversing Module Introduction The E-Plex 425DRM has been designed to simplify wiring in electronic systems by providing the reversing function local to the motor devices thus eliminating long cable
More informationCharlie. Pendant control station. Industrial lifting. Construction lifting. Stage technology. Industrial automation
Charlie Pendant control station Charlie pendant station is a control device for all industrial machinery. It operates as an auxiliary controller of electrical motors through a power interface, such as
More informationGeneral Specifications
Series M Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical Capacity
More informationRE17LLBM asymmetrical flashing relay s V AC - solid state output
Characteristics asymmetrical flashing relay - 0.1..1 s - 24..240 V AC - solid state output Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 75.00 USD Main Range
More informationPRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
More informationIndustrial Areamaster Generation 2 HL LED Luminaire Floodlight for Ordinary Locations
Industrial Areamaster Generation HL LED Luminaire Type R,, X Applications Powerful, efficient weatherproof lighting for applications such as: Security lighting Production facilities Warehouses Processing
More informationActuators Series 8602/3
> Large selection of actuators Pushbuttons Mushroom pushbuttons Rotary actuators Key-operated switches Mushroom stay-put buttons with key lock Mushroom stay-put buttons Twin pushbuttons Illuminated pushbuttons
More informationDescription Basic devices with positive operation contacts. Standards IEC/EN 60947, EN , VDE 0660, UL, CSA
Contactor relay, 2N/O+2N/C, AC Part no. DILA-22(24V60HZ) Catalog No. 276390 Eaton Catalog No. XTRE10B22B6 Delivery program Product range DILA relays Application Contactor relays Description Basic devices
More information