Cylindrical Photoelectric Sensor. 6. Connection F Sensing Distance. 100: 100 mm. 300: 300 mm 2M: 2 Meters 5M: 5 Meters. 5. Output NPN - NO, NC

Transcription

1 Cylindrical Sensor Proximity SALIENT FEATURES Metal Housing AC 2wire- NO, NC DC 3 Wire- NPN, PNP DC Dual Output Models Upto 5 m sensing distance Diffuse, Retro, Through Beam Measurement Model Number Legend Vision & Safety Series. Distance 6. Connection 100: 100 mm 2M: 2m Cable 2. Housing M: Metal Housing 0: 0 mm 2M: 2 Meters 5M: 5 Meters M12J3: M12 Junction Connector with 0.3m extension 3. Type T: Through Beam R: Retro Reflective D: Diffuse Reflective 5. Output NO: PO: PD: ND:, NC, NC #. Accessories included Mounting Nut () : 1 Set Weighing AO: 2 wire AC - NO : 1 No. AC: 2 wire AC - NC (with -_ R models only) Example: -MD-100PO-2M Series - Metal Housing, Diffuse Type - 100mm Distance, PNP NO Output - 2m Cable NOTE: Contact us for models not shown in catalogue. Connector cables are sold separately; look in CC series catalogue for the same ( Automation Components 01

2 Product Highlights Proximity Components Automation Weighing Vision & Safety Measurement Impact resistant Metal Housing Vibration & Noise Resistant! The Series reializes the sensor failure rate in The Series sensors have been designed to withstand certain machines due to accidental impact of vibration, this is done by epoxy coating the components. parent body or foreign object. series comes A moderate level of noise resistance and false positives with impact resistant brass housing to eliminate due to signal interference in ensured by the use of copper the high failure rate in accident prone places. shields around the sensor electronics. Ratings and Specifications Type Through Beam Retro-Reflective Diffuse Reflective -MT-5MNO-_ -MR-2MNO-_ -MD-0NO-_ -MD-100NO-_ -MT-5MPO-_ -MR-2MPO-_ -MD-0PO-_ -MD-100PO-_ +NC - -MR-2MND-_ -MD-0ND-_ -MD-100ND-_ Models +NC - -MR-2MPD-_ -MD-0PD-_ -MD-100PD-_ 2 wire AC - NO -MT-5MAO-_ -MR-2MAO-_ -MD-0AO-_ -MD-100AO-_ 2 wire AC - NC -MT-5MAC-_ -MR-2MAC-_ -MD-0AC-_ -MD-100AC-_ Distance 5 Meters 2 Meters 0mm 100mm Light Source Infrared LED Red LED Infrared LED Standard Object min. Ø21mm opaque object min. Ø56mm opaque object 100x100mm white matte paper Hysteresis - 20% max. Response Time max. 2ms Sensitivity Adjustment -NA- Built-in externaly adjustable 1 turn pot. Operation Mode Dark Light Supply Voltage DC Type: 10 - VDC (Ripple Max 10%); AC Type: VAC Current Consumption max. DC: 5mA; AC: 2.5mA max. DC: ma; AC: ma Connection 2 meter pre-wired cable or 0.3 meter cable with M12 Junction connector depending on the model Type Switching Capacity NO or NC or NO+NC - NPN or PNP / NO or NC - AC 2 wire output (depending on model) 100mA; overload 150mA (AC Type: 200mA; overload 0mA) Output Leakage Current Voltage Drop < 0.01mA (AC Type: < 2.5mA) < 1.5VDC (AC Type: <9VAC) Operation Indication Red LED - Operation Protection Circuits Reverse Polarity, Output Short circuit Protection Dielectric Strength 1000 VAC, 50/60 Hz for 1 minute between current carry parts and case Shock Resistance 20 G - X,Y, Z three directions for 3 times to destruction Vibration Resistance 1mm double amplitude for 1 hour each in X, Y, Z directions (10 to 55 Hz) Environmental Illuminance max. Sunlight: 5,000 lux, Lamp: 2,000 lux Ambient Temperature Operation: -20 ~ 50 C; Storage: - ~ 70 C (non- freezing; non- condensing) Ambient Humidity Operation: 35 ~ 85% RH; Storage: 35 ~ 90% RH (non- condensing) Protection Class IP66 Weight Emitter: 20g, Receiver: 25g aprox. 5g Material Housing: Nickel plated Brass; Lens: PMMA or Eqv.; Nuts: Chrome plated MS Tightening Torque 20 Nm (max.) 02

3 Sensor Dimension Drawing -MD-100 _-2M -MD-100 _-M12J MD-0 _-2M MR-2M _-2M 75 -MT-5M _-2M MD-0 _-M12J MR-2M _-M12J3 -MT-5M _-M12J M12 - Male M12 - Male 65 M12 - Male M12 - Male 20 Cables & Electrodes Tower Lamps Switching Automation Weighing Power All dimensions are in mm Accessories 03

4 Connection Cable Type Accessories Cables & Tower Lamps Switching Power Automation Weighing Electrodes Through Beam - DC 3/ Wire Type Retro Reflective - DC 3/ Wire Type Retro Reflective - AC 2 Wire NO/ NC Diffuse Reflective - DC 3/ Wire Type Emitter Through Beam - AC 2 Wire NO/ NC Emitter Receiver Receiver NPN - NC PNP - NC NPN - NC PNP - NC NPN - NC PNP - NC FOR DC TYPE : DC 10~V : 0 V : Output 1 : Output 2 0

5 Connection Diffuse Reflective - AC 2 Wire NO/ NC NPN Type Main Circuit Protection Circuits Output Diagram Load Load max. 100mA max. 100mA : DC 10~V : 0 V : Output (Light ) : Output (Dark ) 10~ VDC 1 : AC Line (Connect load in series) 1 : DC 10~V 2 : - 2 : Output (Dark ) 3 : AC Line (Connect load in series) 3 : 0 V : - : Output (Light ) Note: * - Connector Cable is not supplied along with unit PNP Type Main Circuit AC 2 Wire Protection Circuits M12 Junction Connector * All Types max. 100mA Load Load max. 100mA 10~ VDC Cables & Electrodes Tower Lamps Switching Automation Weighing Power : AC (Connect load in series) : AC (Connect load in series) Accessories 05

6 Operation Type Light Accessories Cables & Tower Lamps Switching Power Automation Weighing Electrodes Exclusively Represented by: Operation Indicator Output Light Output Dark Intech Systems Chennai Pvt Ltd S-2, Guindy Industrial Estate Chennai Ph: info@intechchennai.com INNO, Rights Reserved In the interest of continious product improvement specifications are subject to change without notice Cat. No