WE ARE ASSOCIATED WITH
|
|
- Theodora Williamson
- 5 years ago
- Views:
Transcription
1 (Laboratory & Products) website: WE ARE ASSOCIATED WITH SERVICES calibration & repair DMM to Multifunction Calibrator Power Analyser to Impulse Analysing System Oscilloscope to Thermal Images Customers from Kerala, Maharashtra, Gujarat and Northern rgn please note: Repair of tan delta meter is undertaken at Service centre located near Madagaon Goa (Kokan Area) Shivatti High Voltage Instrument (Laboratory & Products) The company known to power industries for more than 10 years under the name Shivatti Solutions. Primarily served Power Grid Corporation of India for measuring Capacitance & Tan delta of various Electrical Equipment like Transformers, CT, CVT of Substations all over the country. Shivatti continue to serve the power industries in the new name Shivatti High Voltage Instrument (Laboratory & Products) in short SHILP. The company offers Technical Support in relation to High Voltage for measurement of Partial Discharge, Capacitance & tan delta, HV AC and HV DC, Impulse, Electro Fast Transient (EFT Burst), Corona Discharge and others. Shivatti also gratifies the activity of supporting the product of Megger and Fluke USA. Supplying the Technically most suitable product for the application is the strength of Shivatti. Shivatti is known among the industries for its dedication to support the product at the at-most manner. Serving the power industries continuous basis for more than a decade Shivatti has gained the intimacy of all. ABB, ASLSTOM, CG, ERDA, GE, Havells, KEC-RPG, NTPC, NPCIL, POWERGRID, SIEMENS, SCHNEIDER, TDK- EPCOS, TELK, T&R are the few of power giants to mention here.
2 SOKEN Electric Co. Ltd, Tokyo, Japan Manufacturer of High Precision Test & Measuring Instrument of Japan, known for its unique range of products. SOKEN manufactures measuring instruments meant for a particular application and solely for the Quality Department (Incoming, In process and Final Quality). Partial Discharge Measuring Equipment Capacitance & tan delta Meter Instrument Transformer tan delta Test Set 3 rd Harmonic Resistive component measuring unit On site Power cable, Communication Cable (Marine included) Test kit are the products of SOKEN. Partial Discharge Measuring Equipment: The PD measuring set consists of Coupling Capacitor, Impedance Matching unit and the Meter. Highly sophisticated automatic gain setting circuit enables the meter to measure the charges occurred, maximum charges occurred, identical charges occurred per second, negative or positive or total charges occurred. The software associated with the instrument enables to detect the charge patterns. SOKEN has following models DAC-PD-3 for Rotating Machine, Transformer, Instrument Transformer, Insulation Material, Semiconducting devices, High Freq. Transformers, Reactors etc DAC-PD-9 for Cable, Capacitor, Bushing, Instrument Transformer, Motor Generator etc DAC-PD-7 for Semiconductors, Connectors, Insulating Material, Small motors etc. DAC-PD-7P for Pulse Transformers, Opto-coupler etc Capacitance & tan delta Meter: Even among other diagnosis tools invented in recent years, Capacitance and tandelta test is considered to be the most significant. The Precise measurement of Dielectric Loss angle tandelta and comparing it with the previous measured result reveals the aging of Insulation used in the High Voltage Appliances. This is the most convenient test that can be measured with the repeatability even with grounded and ungrounded objects in house or onsite. SOKEN product ranges: DAC-PSC- series A wide application laboratory model can be used up to 1200 kv as well as 2000 A with suitable accessories, application, Power capacitor, Power cable, Instrument Transformer, Insulation material DAC-ASM series A unique product of the world with state of art technology to test grounded specimen in house or onsite application, Generator Motor, Transformer Cable etc Most suitable for in process plant bushing tan d monitoring DAC-ASC- series High current low voltage high precision meter suitable for PF Correction Capacitor. DAC-HFM series- Variable frequency tand meter for of Dielectric Constant characteristic DAC-MD-1 On site tan d meter for quick diagnosis of small motor, generator Instrument Transformer tan delta Test Set: DAC-VCCT Series The CT PT Accuracy Meter DAC-PBV- Electronic Voltage Burden for PT. DAC-PBC Electronic Voltage Burden for CT DAC-PBVC series -- Ratio Adaptor 3 rd Harmonic Resistive component measuring unit The SOKEN product DAC-LAS-3 measures the Third Harmonic Resistive Current. Used for testing ZnO Las On site Power cable, Communication Cable (Marine included) Test kit The model DAC-LFM-1 is right for this application
3 Manufacturer of Fluke products,fluke Corporation is the world leader in compact,professional electronic test tools. From Industrial maintenance to commercial building operations,fluke tools deliver the testing and troubleshooting capabilities to keep the world up and running.fluke products for Measuring AC/DC Current, AC/DC Voltage, Resistance Frequency, Calculation of Polarisation index and Dielectric Absorption ratio, Capacitance and leakage measurements, and To maintain Power systems,troubleshoot power problems. Clamp meter with Flexible Current Probe Power Quality Analyzers Insulation Resistance Tester Earth Ground Testers Scope meter Thermometer Infrared Cameras Battery Tester Distance Meters Electrical Testers Process calibrator Multifunction Installation Testers Portable Appliance Testers Clamp meter with Flexible Current Probe: The Clamp Meter with Flexible Current Probe Model 370 and other models are , Process Clamp Meter Power Quality Analyzers: 430-II Series 3 phase 437, 435, B Single PhaseThree Phase Power Recorder Fluke 1750, 1745, 1744, 1743 Insulation Resistance Tester- 1555, 1550C (10kV), 1507, 1503 (kv) Earth Ground Testers , 1623 (4 Pole), 1621 Scope meter : 190 II Series s (500 MHz) and 120-II series -125, 124 (40 MHz) Thermometer: 568(IR and Contact), 566, 62 MAX (Dual Laser), Infrared Cameras: Ti400, Ti 300, Ti 125,Ti110-(Multi mode video recording) Battery Tester : 500 Series 521(DC/AC Current), 520, 510, 508 Distance Meters: 424D(Max measurement distance 100m),419D(80m), 414D(50m) Electrical Testers: Phase Rotation Indicators-9062 (Via LED),9040(Via LCD),T5-1000,T5-600 Process calibrator : 726,725(Multifunction process calibrators),715,707,705(loop Calibrators),710(Temperature Calibrator). Multifunction Installation Testers::1654B, 1653B, 1652C Portable Appliance Testers : (Integral QWERTY keyboard for rapid data entry), (Large display) Fluke Current Probes: Fluke 3210 Flexible probe,24, a,fluke Flexible probe,24, a Vibration Meters: Fluke 805 (vibration meter)
4 Fluke products: 1750 Power Quality Analyzer 434 & Ph Power Quality Analyzer Fluke Current Probes Thermal Imagers Fluke 805 vibration meter T Electrical Tester Fluke Insulation Resistance Tester Fluke 381 with iflex 771 ma Process Clamp mete
5 1. Turns Ratio and Inductance Meaurement mh 2. 2 Coil Inductance and Balance Evaluation 3. Corona Discharge Tester Measurement Freq 100 khz Intermittent and cont. Sine wave upto 70 kv KOKUYO ELECTRIC CO,LTD: Manufacturer of KOKUYO Products Like LCR Meters,Curve Tracers,GO-NOGO Comparator,LCR meter etc LCR Meter Curve Tracer Semiconductor Testers and Handlers Digital Impulse Winding Tester With Microwave PD Sensor DC Super imposing Coil Test systems Socket Adapters LCR Meter: KC -605 (Freq-42Hz to 5MHz),KC-557(Freq-12Hz to 100KHz),KC-555(Freq-120Hz to 1KHz) Curve Tracer : SCT-2FR,TNT-2004(USB GPIB Converter Card-option) Semiconductor Testers and Handlers: SMF-3200(Miniature Device Tester),SM-2500 delta mamp Tester,SM /2299/1001( Semiconductor Testers),SM-2007 (High Speed Semiconductor Tester). Digital Impulse Winding Tester With Microwave PD Sensor: KL-902PD(Narrow-Band microwave sensor) Dc Super imposing Coil Test systems: LM-2100 Series : LM-2104(200A),LM-2103(100A),LM-2102(50A),LM-2101(20A)
6 SERVICES calibration : Agillent AEMC CROPICO EXACQ GwinSTEK HAMEG RAYTECH AVR Bakeman BAKER INSTRUMENTS BAUR CHAUVIN- ARNOUX Doble Eltel ENERCON ENERGY SUPPORT EXTECH fluke GREENLEE Haefely - Hipotronics HIOKI Hi-Volt KEITHLEY KLAUKE multi KYORITSU MEA MECO megger METRIX MOTWANE Omicron PHENIX POWER DIAGNOSTI CS PRESCO RUSHABH SANWA SEFRAM soken Tektronix Tettex VANGUARD Vettiner VOLTECH Yokogawa ZIMMER HV DIAGNOSTICS ISA Wavetek
7 THE FACILITIES FOR CALIBRATION: 1.High Voltage AC 2. High Voltage DC, 3.High Voltage Impulse 4. High Voltage Capacitance & Tan delta, 5. Power Analyser 6. LCR Meter 7. Primary/Secondary Injection kit 8. Power Meter 9. BDV Tester, Insulation Resistance meter. 10.Transformer Turns Ratio Meter 10. DMM, Voltmeter, Current Meter Clamp Meter. Digital Temp Indicator 11. Calble Fault Locator,12 Battery Tester, 13 Micro Ohm meter 14. Appliance Tester, INFRASTRUCTURE: 1. References for Capacitance and tan delta 100 pf to 100 micro F tand delta from to 10 and C, tandelta Measuring bridge with 2 ppm resolution. 2. High Voltage Sources 100 kv RMS 70 kv DC 3. High Voltage Dividers 100 kv RMS 80 kv DC 4. High Voltage Impedances 2T Ohm, 5. Impulse Calibrator and measuring Device 6. Current Transformer 6000 A 7. Shunts 6000 A 8. Multifuction Calibrator Fluke 25 PPM accurate in controlled 9. 6 ½ Digit Meter 10. Impulse Calibrator and measuring Device ElectroTechniocal Lab High Voltage Lab
8 repair Capacitance & tan d meter: Tettex, Megger, SOKEN, Doble and others DMM, Clamp Meter, Desktop meter Fluke, Yokogawa Loop Calibrator, Process Calibrator, Multi Product Calibrator Fluke Scope meter Test tools: FLUKE Insulation resistance tester: Fluke Power Analyser- Fluke, AEMC Thermometers: Fluke Electrical Testers: Fluke Thermal imagers: Fluke Infrared Cameras :Fluke FACILITIES FOR REPAIR: Repair of 2877 tan d meter ESD Protected Full Fledged Work Station Genuine Spare parts Experience Engineers Verification Standards Recent POs for repair of tan d meters SHIVATTI HIGHVOLTAGE INSTRUMENT (LABORATORY & PRODUCTS) N0.104, Amaravathi Layout, Chokkasandra, PIA, Nagasandra Post Bangalore contact: sales@tandeltaservice.com (for product enquiry) csdept@tandeltaservice.com (for Cal and Repair enquiry)
MEDIUM & HIGH VOLTAGE
MEDIUM & HIGH VOLTAGE TESTING EQUIPMENT VOLTAGE WITHSTAND SGM Series Resonant Systems The SGM series are used for generating high AC voltages at a fixed frequency (mainly 50 or 60 Hz) by means of an excited
More informationAdvanced Test Equipment Rentals ATEC (2832) CP RC. Resonance circuit for GIS testing
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) CP RC Resonance circuit for GIS testing A new approach to testing gas-insulated switchgear Testing gas-insulated switchgear
More informationELTEL CALIBRATION LABORATORY
NABL ACCREDITED ELTEL CALIBRATION LABORATORY Our laboratory is NABL ACCREDITED in Electro-Technical Discipline as per the international standard IS/ISO/IEC-17025:2005 for both In-House & Site Calibrations.
More informationH V T E S T S O L U T I O N S PA RT N E RS F O R H V & E M C
H V T E S T S O L U T I O N S PA RT N E RS F O R H V & E M C S O L U T I O N S Y O U R S O U R C E F O R T O P Q U A L I T Y T E S T E Q U I P M E N T w w w. h v t e c h n o l o g i e s. c o m Company
More informationPrice List. Effective date 29 Sep of 13. Electrical Metrology Department. National Institute of Metrology (Thailand)
National Institute of Metrology (Thailand) 3/4-5 Moo 3, Klong 5, Klong Luang, Pathumthani, 12120, Thailand Tel. +66 2577 5100 (Please contact customer Service Section: Ext. 3101, 3102 and 3103), Fax. +66
More informationSOLICITUD XXVI CONGRESO NACIONAL DE METROLOGIA
SOLICITUD XXVI CONGRESO NACIONAL DE METROLOGIA Técnicas para la calibración de medidores analógicos Bill Gaviria Regional Product Manager Direct: +1.425.446.5335 Cell: +1.321.626.7845 Email: bill.gaviria@flukecal.com
More informationTesting & Calibration Lab, 204, Diamond Industrial Estate No. 2, Ketki Pada Road, (Near Dahisar Toll Naka), Dahisar (East), Mumbai, Maharashtra
Last Amended on - Page 1 of 5 SOURCE 1. DC VOLTAGE 1 mv to 32 mv 0.43 % to 0.02 % 32 mv to 32 V 0.02 % to 0.008 % 32 V to 1000 V 0.008 % to 0.02 % 2. DC CURRENT 10 µa to 320 µa 0.15 % to 0.03 % 32 µa to
More informationMitigating Murphy s Law While Test. Frédéric Dollinger
Mitigating Murphy s Law While Test Frédéric Dollinger Curriculum Vitae Frédéric Dollinger HAEFELY HIPOTRONICS factory Basel Switzerland Area Sales & Marketing Manager Dipl. Ing. / M.Sc. Mechatronic Language:
More informationSafety through Competence. Short Form Catalogue. Measuring Testing Controlling World Class Hardware and Software
Safety through Competence Short Form Catalogue Measuring Testing Controlling World Class Hardware and Software MAVOLOG 20P Test Instrument for Monitoring Voltage Quality Electrical Engineering, Maintenance,
More informationCDAX 605 High Precision Capacitance & Dissipation Factor Test Set
CDAX 605 High Precision Capacitance & Dissipation Factor Test Set 1 Tan delta and capacitance measurements Hi V A Lo Ground C HL Measure with AC test signal, use Ohms law to calculate: Dissipation factor
More informationCalitron Calibration Laboratory, U1: 207, Kohinoor Arcade, Tilak Chowk, Nigdi, Pune, Maharashtra
Calitron Calibration, U1: 207, Kohinoor Arcade, Tilak Chowk, Last Amended on - Page 1 of 7 SOURCE 1. DC Voltage # 1 mv to 200 mv 200 mv to 1000 V 2. DC Current # 100 µa to 200 ma 200 ma to 20 A 20A to
More informationSpecialists in HV and MV test and diagnostics. Testing in Substations
Specialists in HV and MV test and diagnostics Testing in Substations Testing in Substations Testing in Substations At 4fores we specialize in the diagnosis and measurement of all types of existing technologies
More informationSolutions In Calibration TRANSMILLE PRODUCT GUIDE 2015/16 PROVIDING SOLUTIONS IN CALIBRATION WORLDWIDE. www. transmillecalibration.
TRANSMILLE PRODUCT GUIDE 2015/16 PROVIDING SOLUTIONS IN CALIBRATION WORLDWIDE PRODUCT MATRIX WORKLOAD Multiproduct Calibrators Electrical Test Equipment Calibrator 1000 3000A 4000 9000A 3200B DMMS Up to
More informationKIT 4.0 HIGH VOLTAGE CONSTRUCTION KIT. reliable. precision. HIGH V O L T A G E T E S T S OLUTION S
KIT 4.0 HIGH VOLTAGE CONSTRUCTION KIT reliable. precision. HIGH V O L T A G E T E S T S OLUTION S 2 General Description GENERAL DESCRIPTION APPLICATION The KIT 4.0 is a high voltage system made of easily
More informationThe University of New South Wales. School of Electrical Engineering and Telecommunications. High Voltage Systems ELEC9712. Appendix Partial Discharge
The University of New South Wales School of Electrical Engineering and Telecommunications High Voltage Systems ELEC9712 Appendix Partial Discharge Content Introduction Quantities measured Test circuits
More informationAC Resonant Test Systems Tank Type Up to 500 kv
R AC Resonant Test Systems Tank Type Up to 500 kv PHENIX TECHNOLOGIES Testing Applications High power AC Resonant Test Systems are used where the load is largely capacitive with very low real power losses
More informationGreat new promotions on the Fluke multifunction installation testers! Specials. Spring - Summer 2018 NEW. electrical testers T6. See more inside!
Great new promotions on the Fluke multifunction installation testers! Specials Spring - Summer 2018 NEW electrical testers T6 See more inside! The NEW Fluke T6 Electrical Testers with FieldSense technology
More informationAfrica Utility Week Focus Day Substation Condition Monitoring Benefits of Ultrasound
Africa Utility Week Focus Day 2014 Substation Condition Monitoring Benefits of Ultrasound Agenda Review - Substation Condition Monitoring Electrical discharge Types and origin In switchgear Results/consequences
More informationMegha Enterprises.
+91-8048417447 Megha Enterprises https://www.megha-enterprises.com/ As a prominent Trader and Supplier, We are providing our clients Electrical & Electronic Measuring and Testing Equipment. These are manufactured
More informationPrice List. Calibration Fee
National Institute of Metrology (Thailand) Calibration Fee Electrical Metrology 1 DC Voltage Standard 1.018 V 0.9 V/V 12,500/piece 09010-10110 10 V 0.4 V/V + 6,750/next point Standard Cell 1 V / 1.018
More informationGROUND TESTERS For all of your Ground Testing needs...
GROUND TESTERS For all of your Ground Testing needs... An array of Ground Testers to choose from Whether you are doing a simplified 2-Point, a more complete 3- or 4-Point Fall-of-Potential test, a soil
More informationNEO TELE-TRONIX PVT. LTD. 6/7 Bijoygarh, Kolkata , Tel : ; Fax :
NEO TELE-TRONIX PVT. LTD. 6/7 Bijoygarh, Kolkata - 700 032, Tel : 033 2477 3126; Fax : 033 2477 2403 www.ntplindia.com SPECIFICATION NTPL MAKE MICRO-CONTROLLER BASED AUTOMATIC 50KV/10A AC HIGH VOLTAGE
More informationTHE ELECTROM itig II MOTOR TESTER AND WINDING ANALYZER
THE ELECTROM itig II MOTOR TESTER AND WINDING ANALYZER EASY TO USE TESTER THAT FINDS MORE FAULTS. The state of the art Electrom itig II provides a wide range of tests to analyze the condition of insulation
More informationOnsite Mobile AC High Voltage Test System
TSGMF(T) series Onsite Mobile AC High Voltage Test System Onsite mobile AC high voltage test systems are used for withstand voltage testing, partial discharge measurement, tan delta measurement to instrument
More informationSGMF(T) series. Onsite Mobile AC High Voltage Test System. Applications:
SGMF(T) series Onsite Mobile AC High Voltage Test System On-site AC high voltage test systems are used for voltage withstanding test, partial discharge measurement, tan delta measurement on those instrument
More informationExplanation of options and accessories for the GP102 and GP102 -PAV
Powertek Power Instrumentation, LCR analysis Gain-Phase / waveform analysis / PAV Shunts, current transformers 148 Beecham Road Reading Berkshire RG30 2RE England Tel: 0118 950 2468 Fax: (+44) 0118 958
More informationInternational Instruments Industries
+91-8048758361 International Instruments Industries https://www.indiamart.com/iii-secunderabad/ Reckoned as one of the prominent suppliers and traders of Electric Instruments, we offer quality products
More informationInsulation Testers and Earth Ground Testers
Insulation Testers and Earth Ground Testers With a 5000 V MegOhmMeter for industrial-strength insulation testing and a range of compact hand-held instruments, we offer a solution for every troubleshooting
More informationINDEX. Micro-ohmmeter MH-10 Page 3. MI (5, 10, 15, 20 kv) Page 4 Mega-ohmmeter MD (5 kv) Page 4
Micro-ohmmeter MH-10 Page 3 MI (5, 10, 15, 20 kv) Page 4 Mega-ohmmeter MD (5 kv) Page 4 Earth resistance meter TL-5 Page 5 Indirect earth contact simulator MPC (5, 20, 50 A) Page 6 Trip time tester CR
More informationMPS Electrical Test Laboratory, Larsen & Toubro Limited, Mysore Campus, KIADB Industrial Area, Hebbal Hootagalli, Mysore, Karnataka
Last Amended on - Page 1 of 6 SOURCE 1. DC VOLTAGE $ 1mV to 10 mv 0.13 % to 0.014% Using Multifunction Calibrator 10 mv to 1 V 0.014% to 0.0016% By Direct Method 1 v to 10 V 0.0016% to 0.0017% 10 V to
More informationTechnical Services Department, BHEL, Piplani, Bhopal, Madhya Pradesh. Discipline Electro Technical Calibration Issue Date
Last Amended on 29.02.2016 Page 1 of 6 SOURCE 1. DC VOLTAGE $ 100mV to 220 mv 220 mv to 220 V 220 V to 1000 V 2. AC VOLTAGE $ 50 Hz to 1 khz 3 mv to 220 mv 220 mv to 220 V 220 V to 1000 V 3. DC CURRENT
More informationDiscipline Electrical Testing Issue Date Certificate Number T-2837 Valid Until Last Amended on - Page 1 of 6 LOCATION 1
Post: Last Amended on - Page 1 of 6 LOCATION 1 I. TRANSFORMERS AND REACTORS 1. 500 MVA, 765 kv 500 MVA, 400 kv Ratio & Polarity Check Magnetic Balance & Magnetizing Current Measurement at Low Voltage Vector
More informationTR CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF ELECTRICAL DCLF METROLOGY. Approved By: Senior Manager: Mpho Phaloane Revised By:
CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF ELECTRICAL LF METROLOGY Approved By: Senior Manager: Mpho Phaloane Revised By: Specialist Technical Committee Date of Approval: 2015-08-26 Date of
More informationAutomatic Transformer Winding Analyser
2293 Automatic Transformer Winding Analyser The 2293 is an automatic winding analyser, optimized for three phase power and distribution transformer measurements. It uniquely combines winding resistance
More informationAC/DC Current Probe GCP-100 QUICK START GUIDE ISO-9001 CERTIFIED MANUFACTURER
AC/DC Current Probe GCP-100 QUICK START GUIDE ISO-9001 CERTIFIED MANUFACTURER This manual contains proprietary information, which is protected by copyright. All rights are reserved. No part of this manual
More informationFluke Clamp Meters Solutions for every need
Fluke Clamp Meters Solutions for every need 381 355 773 more solutions inside Clamp Meter selection chart Job functions Applications Recommended clamp Process Technician/ Automation Specialist Multiple
More informationHVA SERIES VLF TEST SETS. Hipot Testers HVA Series for VLF (0.1 Hz) testing of MV and HV cables.
HVA SERIES VLF TEST SETS Hipot Testers HVA Series for VLF (0.1 Hz) testing of MV and HV cables. INNOVATIVE, RELIABLE, ECONOMICAL HIGH VOLTAGE TESTING FROM b2 HIGH VOLTAGE VLF, DC, cable sheath testing
More informationPRODUCT PORTFOLIO TEST AND MEASURING SYSTEMS
PRODUCT PORTFOLIO TEST AND MEASURING SYSTEMS n Quality made in Germany n Standardized and customized solutions n Turn key projects, all from one hand 0.1-1/1 Product Portfolio Test and Measuring Systems
More informationStandalone High Accuracy Transformer Analysis. Basic 0.02dB with class leading high frequency performance. RS232, USB and LAN as standard
N4 Sweep Frequency Response Analyzer SFRA45 Standalone High Accuracy Transformer Analysis Leading wideband accuracy Wide frequency range Full Colour VGA Display PC software included Leading phase accuracy
More information5080A Multi-Product Calibrator
5080A Multi-Product Calibrator Calibration solutions for your analog and digital workload 5080A Multi-Product Calibrator: expanded workload coverage Calibrate analog and digital meters, and much more The
More information200ADM-P. Current Injection System with Phase Shift A 3.000s 2.000A 50.00Hz 0.0. Features
CT ratio Power Harmonics ac+dc 200ADM-P Current Injection System with Phase Shift Features 0-200A output current True RMS metering with 1 cycle capture Variable auxiliary AC voltage/current output with
More informationSTS Fully automatic. Large graphic display. Primary injection testing capabilities: up to 3000 A, with the optional module BUX 3000
STS 4000 Multifunction substation maintenance & commissioning test system for current, voltage and power transformers. Capacitance / Tan Delta diagnostic system with the optional module TD 5000. w w w.
More informationMegohmmeter Model 1060
CHAUVIN ARNOUX GROUP Chauvin Arnoux Inc. 15 Faraday Drive Dover, NH 03820 USA (603) 749-6434 Fax (603) 742-2346 www.aemc.com Issue 13 WATTS CURRENT TECHNICAL BULLETIN Summer/Fall 2017 Megohmmeter Model
More informationSubstation Test Equipment Guidebook
Substation Test Equipment Guidebook CONTENTS TRANSFORMER TURNS RATIO TESTERS CURRENT TRANSFORMER TESTERS CIRCUIT BREAKER ANALYZERS CIRCUIT BREAKER POWER SUPPLIES BREAKER ANALYZER ACCESSORIES 4 5 6 7 8
More informationTable of Contents. Table of Contents Instrumentation Multimeter. Lucas Nülle GmbH Page 1/14
Table of Contents Table of Contents Instrumentation Multimeter 1 2 2 Lucas Nülle GmbH Page 1/14 www.lucas-nuelle.com Instrumentation Robust, educational and industrial measuring equipment for electrical
More informationOver 75 years of Japanese reliability and quality. Kyoritsu test and measurement
Kyoritsu. Over 75 years of Japanese reliability and quality. Eaton is pleased to represent the Kyoritsu brand throughout Australia. Kyoritsu is a world leading brand when it comes to electrical test and
More informationT/3000 T/3000. Substation Maintenance and Commissioning Test Equipment
T/3000 Substation Maintenance and Commissioning Test Equipment MULTI FUNCTION SYSTEM FOR TESTING SUBSTATION EQUIPMENT SUCH AS: CURRENT, VOLTAGE AND POWER TRANSFORMERS, ALL TYPE OF PROTECTION RELAYS, ENERGY
More informationPD Solutions. On-Line PD Measurement Devices
On-Line PD Measurement Devices 1. Longshot Device (see Figure 1) The measurement system applied is based around the wideband (0-400 MHz) HVPD- Longshot partial discharge test unit which utilizes a high-speed
More informationTHE ELECTROM itig II MOTOR TESTER AND WINDING ANALYZER
THE ELECTROM itig II MOTOR TESTER AND WINDING ANALYZER AUTOMATED, SAFE, AND EASY TO USE TESTER. HIGH AND LOW VOLTAGE TESTS IN A LIGHTWEIGHT PACKAGE. The state of the art Electrom itig II provides a wide
More informationSivananda Electronics
+91-8048762417 Sivananda Electronics https://www.sivanandaelectro.com/ We are leading manufacturers, wholesalers, and exporters of an impeccable array of Electrical Testing & Measuring Instruments. This
More informationChapter 7 Conclusion 7.1 General
Chapter 7 7.1 General The mechanical integrity of a transformer winding is challenged by several mechanisms. Many dielectric failures in transformers are direct results of reduced mechanical strength due
More informationCalibration Techniques for the Home Lab
Calibration Techniques for the Home Lab Jacques Audet VE2AZX jacaudet@videotron.ca Web: ve2azx.net September 2018 ve2azx.net 1 Summary - Using a reference multimeter as a calibrator for less accurate instruments.
More informationThe NEW itig II Winding and Motor Analyzer A revolution in automated, safe, and comprehensive high and low voltage tests all in a lightweight
The NEW itig II Winding and Motor Analyzer A revolution in automated, safe, and comprehensive high and low voltage tests all in a lightweight package. The Electrom itig II offers a comprehensive range
More informationIEC Electrical fast transient / Burst immunity test
CONDUCTED RF EQUIPMENT POWER AMPLIFIERS IEC 61000-4-4 Electrical fast transient / Burst immunity test IEC 61000-4-4 Electrical fast transient / Burst immunity test Markus Fuhrer Phenomenom open a contact
More information9. How is an electric field is measured?
UNIT IV - MEASUREMENT OF HIGH VOLTAGES AND HIGH CURRENTS PART-A 1. Mention the techniques used in impulse current measurements. Hall generators, Faraday generators and current transformers. 2.Mention the
More informationHigh-Voltage Test and
Eberhard Wolfgang Hauschild Lemke High-Voltage Test and Measuring Techniques ^ Springer Contents 1 Introduction 1 1.1 Development of Power Systems and Required High-Voltage Test Systems 1 1.2 The International
More informationN. TEST TEST DESCRIPTION
Multi function system for testing substation equipment such as: current, voltage and power transformers, all type of protection relays, energy meters and transducers Primary injection testing capabilities
More informationMeasuring Reflected Voltage Spikes in VFD Motor Applications
Keywords: VFD, ASD, impedance mismatch, high frequency, reflected voltage, spikes, over voltage, ringing, cable length, inverter rated motor, turn to turn voltage, electric motor testing, oscilloscope,
More informationDRTS 66 The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters
The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters Testing all relay technologies: electromechanical, solid state, numerical and IEC61850 Manual
More information1650 Series Multifunction Installation Testers
1650 Series Multifunction Installation Testers Fluke 1654B Fluke 1653B Fluke 1652C BS7671 17th Edition IEE Wiring Regulations IEC 60364.6.61, HD 384 6 AA Cell batteries C1600 Hard carrying case Zero Adapter
More information700 Series AC Dielectric Test Sets
700 Series AC Dielectric Test Sets AC Test Systems HAEFELY HIPOTRONICS standard line of AC Test Systems is designed to perform high voltage AC tests on electrical apparatus in accordance with IEC60, IEEE
More informationCOURSE PLANNER. Subject: TESTING AND COMMISSIONING OF ELECTRICAL EQUIPMENTS ( ) B.E. Fourth Year (8 th Sem) Branch Electrical Engineering
COURSE PLANNER Subject: TESTING AND COMMISSIONING OF ELECTRICAL EQUIPMENTS (2180901) B.E. Fourth Year (8 th Sem) Branch Electrical Engineering Term: 16/2 (DECEMBER-16 to APRIL-17) Faculty: Prof. U. V.
More informationPrimary Metering. What is Primary Metering?
NWEMS Primary Metering August 22, 2018 Bill Unbehaun, Tacoma Power Exchanging Expertise Since 1893 What is Primary Metering? Metering energy flow past a point at high voltage above 600v Both PTs and CTs
More informationGENERATOR TESTING APPLICATION GUIDE. reliable. precision.
GENERATOR TESTING APPLICATION GUIDE www.haefely-hipotronics.com reliable. precision. 2 GENERATOR TESTING CONTENTS Product Line Overview 3 AC Hipot Testing 4 Partial Discharge Measurement 5 DC Hipot Testing
More informationEMC TEST REPORT For MPP SOLAR INC Inverter/ Charger Model Number : PIP 4048HS
EMC-E20130903E EMC TEST REPORT For MPP SOLAR INC Inverter/ Charger Model Number : PIP 4048HS Prepared for : MPP SOLAR INC Address : 4F, NO. 50-1, SECTION 1, HSIN-SHENG S. RD. TAIPEI, TAIWAN Prepared by
More informationCondition Assessment of High Voltage Insulation in Power System Equipment. R.E. James and Q. Su. The Institution of Engineering and Technology
Condition Assessment of High Voltage Insulation in Power System Equipment R.E. James and Q. Su The Institution of Engineering and Technology Contents Preface xi 1 Introduction 1 1.1 Interconnection of
More informationHigh-Voltage Test Techniques
High-Voltage Test Techniques Dieter Kind Kurt Feser 2nd Revised and Enlarged Edition With 211 Figures and 12 Laboratory Experiments Translated from the German by Y. Narayana Rao Professor of Electrical
More informationContents. Measurement and checking equipment for transformation centers Micro-ohmmeter MH-10 Page 3. Indirect earth contact simulator TL-5 Page 5
Measuring and testing equipments P 6 P.6.01 GB for substations Micro-ohmmeter MH-10 Page 3 Mega-ohmmeter MI (5, 10, 15, 20 kv) Page 4 MD (5 kv) Page 4 Indirect earth contact simulator TL-5 Page 5 Indirect
More informationGAMMA 10 DIGITAL MULTIMETER
Gamma 10 www.sifamtinsley.co.uk DATASHEET Issue 1.0 Multifunction Meters Transducers & Isolators Temperature Controllers Converters & Recorders Digital Panel Meters Current Transformers Analogue Panel
More informationTRANSMILLE 3010A PRECISION MULTIPRODUCT CALIBRATOR EXTENDED SPECIFICATIONS
TRANSMILLE 3010A PRECISION MULTIPRODUCT CALIBRATOR EXTENDED SPECIFICATIONS www. transmille.com 3010A EXTENDED SPECIFICATIONS General Specifications TRANSMILLE LTD Warm Up Time Double the time since last
More informationDIGITAL DUAL DISPLAY AC/DC CLAMP METER MODEL-860A OPERATION MANUAL
DIGITAL DUAL DISPLAY AC/DC CLAMP METER MODEL-860A OPERATION MANUAL DIGITAL DUAL DISPLAY AC/DC CLAMP METER MODEL-860A TABLE OF CONTENTS TITLE PAGE Safety Information Safety Symbols... 1 Meter Description...
More informationANNEXURE 1 LIST OF EQUIPMENTS LOT 1
ANNEXURE LIST OF EQUIPMENTS LOT Sl. No. Description Quantity Nos Recommended Make Digital Multimeter Fluke AC/DC Clamp meter with flexi clamp Fluke/Kyoritsu AC/DC Clamp meter(0ma to 0A) Kyoritsu/Fluke/Hioki
More informationVARIABLE FREQUENCY RESONANT TEST SYSTEM
VARIABLE FREQUENCY RESONANT TEST SYSTEM 400kV,1200kVA Tank Type Reactor for Outdoor Cable Test Field 650kV, 5850kVA, Cylinder Type Reactors for Onsite Testing of GIS and Cable PHENIX Variable Frequency
More informationCP CU1. Coupling unit for line and ground testing
CP CU1 Coupling unit for line and ground testing Line and ground test system CPC 100 The CPC 100 is a multifunctional test set for primary assets. When combined with the CP CU1 it covers the following
More information0.5% Accuracy Overload Fuse protection Test Clips/Direct insert jack for easy measurement TES Capacitance Meter
TES-1500 Capacitance 0.5% Accuracy Overload Fuse protection Test Clips/Direct insert jack for easy measurement TES-2620 TRMS Multimeter TES-2700 TES-2712 LCR Multimeter 3-3/4 Digital LCD with bar-graph
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AMETEK CO., LTD. NAGOYA OFFICE. (Main Laboratory) Onna, Atsugi-shi, Kanagawa-ken, Japan
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AMETEK CO., LTD. NAGOYA OFFICE (Main Laboratory) 5-1-1 Onna, Atsugi-shi, Kanagawa-ken, 243-0032 Japan (Commercial Office) 1-329 Kifune, Meito-ku Nagoya-shi,
More informationError vs. Uncertainty Historical Perspective
1 Error vs. Uncertainty Historical Perspective Jim McBride Chairman PSIM Committee Vice-Chairman HVTT Subcommittee IEEE PES SPDC Fall 2017 Clearwater, FL Discussions on Uncertainty PSIM - HVTT Subcommittee
More informationGreen LED (right of 'D' type connector)
3050A EXTENDED SPECIFICATIONS General Specifications TRANSMILLE LTD Warm Up Time Double the time since last used up to 20 minutes maximum Standard Interfaces USB Optional Interfaces GPIB (IEEE-488) : RS232
More informationUnit 3 Magnetism...21 Introduction The Natural Magnet Magnetic Polarities Magnetic Compass...21
Chapter 1 Electrical Fundamentals Unit 1 Matter...3 Introduction...3 1.1 Matter...3 1.2 Atomic Theory...3 1.3 Law of Electrical Charges...4 1.4 Law of Atomic Charges...4 Negative Atomic Charge...4 Positive
More informationDimensional Up to 25 mm/ mm 2.0 µm 0 mm to 100 mm/ 0.01 mm 7.4 μm 100 mm to 300 mm/ 0.01 mm 10 μm
IAS Accreditation Number Company Name CL-154 Almeer Technical Services Calibration Laboratory Address Plot No. 100/104, Area 7 P.O. Box 9240 Ahmadi, 61003 Kuwait Contact Name Satyananda Rao, Technical
More informationMODEL INFORMATION. MODEL AccuLoss ALMS 1058, 2058 and Capabilities. Measurements
MODEL AccuLoss ALMS 1058, 2058 and 4058 The measurement of electric power and energy at high voltages and currents at low power factors is becoming increasingly important economically as a way to reduce
More informationDTE Power via MDI Task Force P802.3af
DTE Power via MDI Task Force P802.3af AC Disconnect Detection Ad Hoc EN55024 Test Results A.1.4.3 Paul Scott, Norbert Kukta, Scott Burton 10 May 2002 Objectives Determine which EN55024 tests are relevant
More informationSchlöder GmbH - EMC Test and Measurement Systems Model #
Schlöder GmbH - EMC Test and Measurement Systems Model # Product Description IEC / EN 61000-4 - 2 ESD SESD 216 ESD generator 10 kv CON / 16,5 kv AIR acc. to IEC 61000-4-2, 150 pf / 330 ohm SESD 230 ESD
More informationPreface...x Chapter 1 Electrical Fundamentals
Preface...x Chapter 1 Electrical Fundamentals Unit 1 Matter...3 Introduction...3 1.1 Matter...3 1.2 Atomic Theory...3 1.3 Law of Electrical Charges...4 1.4 Law of Atomic Charges...5 Negative Atomic Charge...5
More informationDB230 Capacitor Tester
DB230 Capacitor Tester Quick and accurate testing on automatic production lines THE DB 200 SERIES General The DB230 Component Tester is especially designed for high accuracy testing of capacitors on production
More informationMIDAS 2881 / 2881G. Mobile Insulation Diagnosis & Analysing System
MIDAS 2881 / 2881G Mobile Insulation Diagnosis & Analysing System Measurement of insulation losses is performed during periodic maintenance and inspection of high voltage equipment like power transformers,
More informationMEASURING INSTRUMENT. Capacitance Leakage Current / IR Meter Model IR Features.
MEASURING INSTRUMENT Capacitance Leakage Current / IR Meter Model IR 2689 Features Capacitance leakage current test function. Insulation resistance test function. Precise low current charge function (0.5mA±0.05mA).
More informationN. TEST TEST DESCRIPTION
Multi function system for testing substation equipment such as: current, voltage and power transformers, over-current protection relays, energy meters and transducers Primary injection testing capabilities
More informationFIELD ELECTRICAL TESTING SPX TRANSFORMER SOLUTIONS, INC.
Regional Technical Seminar FIELD ELECTRICAL TESTING SPX TRANSFORMER SOLUTIONS, INC. Field Electrical Testing Applications Key Purposes of Field Electrical Testing: Receiving inspection Acceptance testing/commissioning
More informationDoble Solutions for Partial Discharge. Greg Topjian Solutions Manager
Doble Solutions for Partial Discharge Greg Topjian Solutions Manager 617-393-3129 gtopjian@doble.com Why do we need to conduct PD measurements PD a major cause of early failure for HV insulation. Partial
More informationAC Resonant Test Systems Tank Type Up to 150 kv
R AC Resonant Test Systems Tank Type Up to 150 kv PHENIX TECHNOLOGIES Testing Applications AC Resonant Test Systems are used where the load is largely capacitive with very low real power losses such as
More informationCS114 + CS115 + CS116
System description Test Setup for MIL-STD-461 D, E&F CS114 + CS115 + CS116 1. MONTENA EMC... 2 1.1 PRODUCTS... 3 1.2 TURN KEY MIL STD 461 TEST INSTALLATIONS... 3 2. TEST SETUP DESCRIPTION... 4 2.1 TEST
More informationUTILITY & SUBSTATION TESTING
UTILITY & SUBSTATION TESTING Application Guide APT Power Technology Co., Ltd. Xi an FOREWORD Substations are key part of power infrastructure. Consist mostly of transformers, GIS, Switchgears, CT/PT, Surge
More information10. DISTURBANCE VOLTAGE WITHSTAND CAPABILITY
9. INTRODUCTION Control Cabling The protection and control equipment in power plants and substations is influenced by various of environmental conditions. One of the most significant environmental factor
More informationFully automated three phase 250V Transformer Turns Ratio Meter
TTR 2796 Fully automated three phase 250V Transformer Turns Ratio Meter FEATURES AND BENEFITS Fully automated measurement of turns ratio, voltage ratio, phase displacement, and excitation current. Better
More informationElectronics Test and Development Centre, STQC Directorate, Agriculture College Campus, Shivajinagar, Pune, Maharashtra
Last Amended on 23.02.2015 Page 1 of 8 SOURCE 1. DC VOLTAGE # 100 V to 1 mv 0.5 % to 0.06 % Using Multi-Function Calibrator 1 mv to 10 mv 0.06 % to 0.007 % by 10 mv to 100 mv 0.007 % to 0.0014 % 100 mv
More informationMSR Series. Modular Series Resonant Systems kV; 500kVA...60,000kVA FEATURES BENEFITS APPLICATIONS 1/6
MSR Series Modular Series Resonant Systems - 250...2200kV; 500kVA...60,000kVA The MSR Series is designed to provide power for tests on cables, HV and EHV transformers, gasinsulated switchgear, bushings,
More informationCPC 100. Multi-functional Primary Test System for Substation Commissioning and Maintenance
CPC 100 Multi-functional Primary Test System for Substation Commissioning and Maintenance CPC 100 - The Revolutionary All-in-One Test System The patented test system replaces numerous individual testing
More informationS540 Power Semiconductor Test System Datasheet
S540 Power Semiconductor Test System Datasheet Key Features Automatically perform all wafer-level parametric tests on up to 48 pins, including high voltage breakdown, capacitance, and low voltage measurements,
More information