DIO20881/2/4 600nA,Rail-to-Rail Input/ Output Low Power Amplifier
|
|
- Agnes Ward
- 5 years ago
- Views:
Transcription
1 Rev nARailtoRail Input/ Output Low Power Amplifier Features Ultra low power: 600nA per channel Unity Gain Stable Gain Bandwidth Product: 4kHz Wide supply range:.v to.v Available in SOT3 SOIC8 MSOP8 SOP4 and TSSOP4 packages Temperature Range: Industrial: 40 C to 8 C Extended: 40 C to C Typical Applications Descriptions DIO088x is a family of ultra low power operational amplifier with railtorail CMOS input/output and single/dual channels selectable. DIO088x family has a gainbandwidth product of 4kHz wide operating supply voltage from.v to.v and broad output voltage swing. DIO088x consumes ultra low power with each channel 600nA of bias current which makes DIO088x be ideal for battery powered device temperaturesense device etc. Rf The DIO088x operational amplifier family is available in single (DIO088) and dual Rg VREF VIN DIO088X NonInverting Amplifier Gain= Rf Rg VOUT (DIO088) and quad (DIO0884) configurations. Furthermore the DIO088 is offered in the lead SOT3 package. All types of amplifiers are fully specified over the extended 40 C to C temperature range. Applications Portable Equipment Active Filters Data Acquisition Portable Equipment Test Equipment Broadband Communication Process Control Audio and Video Processing Ordering Information Order Part Number Top Marking T A Package DIO088ST YW(X)Z Green or RoHS 40 to C SOT3 Tape & Reel 3000 DIO088SO8 DIO08 Green or RoHS 40 to C SOIC8 Tape & Reel 00 DIO088MP8 DIO08 Green or RoHS 40 to C MSOP8 Tape & Reel 3000 DIO088SO8 DIO08 Green or RoHS 40 to C SOIC8 Tape & Reel 00 DIO088MP8 DIO08 Green or RoHS 40 to C MSOP8 Tape & Reel 3000 DIO0884CS4 DIO084 Green or RoHS 40 to C SOP4 Tape & Reel 00 DIO0884TP4 DIO084 Green or RoHS 40 to C TSSOP4 Tape & Reel 00
2 RailtoRail Input/ Output Low Power Amplifier Pin Assignments OUT SOT3 MSOP8 / SOIC8 8 IN 7 IN 3 4 IN IN 3 6 OUT DIO088 4 DIO088 SOIC8/MSOP8 OUTA SOP4/TSSOP4 4 OUTD OUTA 8 INA 3 IND INA 7 OUTB INA 3 IND INA INB INB INB INB I I DIO088 OUTB 7 8 OUTC DIO0884 Figure Top View Pin Description Pin name Description Positive supply Negative supply INX INX OUTX Positive Input Negative Input Output
3 RailtoRail Input/ Output Low Power Amplifier Absolute Maximum Ratings Stresses beyond those listed under Absolute Maximum Rating may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other condition beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maxim rating conditions for extended periods may affect device reliability. Parameter Rating Unit Supply Voltage ( ) 7 V Input Voltage ()0.3V to ()0.3V V Difference Input Voltage V Storage Temperature Range 6 to 0 C Junction Temperature 0 C Lead Temperature Range 60 C ESD HBM JEDEC: JESDA4 8 CDM JEDEC: JESDC0 kv Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation to ensure optimal performance to the datasheet specifications. DIOO does not recommend exceeding them or designing to Absolute Maximum Ratings. Parameter Rating Unit Supply Voltage. to. V Input Voltage 0 to V Operating Temperature Range 40 to C
4 RailtoRail Input/ Output Low Power Amplifier Electrical Characteristics Typical value: =V R L=MΩ to / V CM=/ T A = C unless otherwise specified. Symbol Parameter Conditions Min. Typ. Max. Unit INPUT CHARACTERISTICS V OS Input Offset Voltage 40 C T A C =.V to.v mv I B Input Bias Current =.V to.v pa I OS Input Offset Current =.V to.v pa V CM Common Mode Voltage Range 0. () 0. V CMRR Common Mode Rejection Ratio 40 C T A C 00 db A OL Open Loop Voltage Gain R L=0kΩ V O= 0. to () db V OS/ T Input Offset Voltage Drift 40 C T A C 8 µv/ C OUTPUT CHARACTERISTICS V OH Output Voltage High R L=0kΩ 40 C T A C 4.99 V V OL Output Voltage Low R L=0kΩ 40 C T A C 8 mv I SC Output Short Circuit Current Source I SC =V 30 Sink I SC =V 30 ma POWER SUPPLY PSRR Power Supply Rejection Ration 00 db I S Supply Current per Channel/Amp 40 C T A C na DYNAMIC PERFORMAE GBP Gain Bandwidth Product C L=60pF 4 khz SR Slew Rate G= V Output Step 3. V/ms t S Setting Time G= V Output Step 0 µs Θm Phase Margin 49 Deg tr Overload Recovery Time 0 µs NOISE PERFORMAE THD Total Harmonic Distortion f=00hz 4V PP R L=0kΩ 0.09 % e n Voltage Noise Density f=khz 90 nv/ Hz Specifications subject to change without notice.
5 RailtoRail Input/ Output Low Power Amplifier CONTACT US Dioo is a professional design and sales corporation for highquality and performance analog semiconductors. The company focuses on industry markets such as cell phone handheld products laptop and medical equipment and so on. Dioo s product families include analog signal processing and amplifying LED drivers and charger IC. Go to for a complete list of Dioo product families. For additional product information or full datasheet please contact with our Sales Department or Representatives.
DIO2051/2052/DIO2054. Rev 1.0. Single/Dual/Quad, Rail-to-Rail Low Power Amplifier. Features. Descriptions. Typical Application.
DIO2051/2052/DIO2054 Single/Dual/Quad, Rail-to-Rail Low Power Amplifier Rev 1.0 Features Rail-to-Rail Input and Output 0.65mV Typical offset (V OS) Unity Gain Stable Gain Bandwidth Product: 550KHz Very
More information190μA, 3MHz, Rail-to-Rail I/O CMOS Operational Amplifiers VREF. DIO2026QN20 D2026 RoHS/Green -40 to +125 C QFN4*4-20 Tape & Reel, 5000
Rev 0.1 DIO2026 190μA, 3MHz, Rail-to-Rail I/O CMOS Operational Amplifiers Features Supply Voltage Range: 2.5V to 5.5V Supply Current: Typical 190μA per channel Rail-to-Rail Input and Output ±1mV Typical
More informationSGM8271/2/4 High Voltage Rail-to-Rail Output Operational Amplifiers
GENERAL DESCRIPTION The SGM8271 (single), SGM8272 (dual) and SGM8274 (quad) are high voltage operational amplifiers that are designed to offer a wide input common mode voltage range and output voltage
More informationSGM8621/2/3/4 3MHz, Rail-to-Rail I/O CMOS Operational Amplifiers
SGM8621/2/3/4 3MHz, Rail-to-Rail I/O PRODUCT DESCRIPTION The SGM8621 (single), SGM8622 (dual), SGM8623 (single with shutdown) and SGM8624 (quad) are low noise, low voltage, and low power operational amplifiers,
More informationSGM8554 Single-Supply, Quad Rail-to-Rail I/O Precision Operational Amplifier
PRODUCT DESCRIPTION The SGM8554 is a quad rail-to-rail input and output precision operational amplifier which has low input offset voltage, and bias current. It is guaranteed to operate from 2.5V to 5.5V
More informationSGM8521/2/4 150kHz, 5.5μA, Rail-to-Rail I/O, CMOS Operational Amplifiers
//4 0kHz,.μA, Rail-to-Rail I/O, GENERAL DESCRIPTION The (single), SGM8 (dual) and SGM84 (quad) are low cost, rail-to-rail input and output voltage feedback amplifiers. They have a wide input common mode
More informationSGM8631/2/3/4 470μA, 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers
PRODUCT DESCRIPTION The SGM863 (single), SGM863 (dual), SGM8633 (single with shutdown) and SGM8634 (quad) are low noise, low voltage, and low power operational amplifiers, that can be designed into a wide
More informationSGM8584 Single-Supply, Quad Rail-to-Rail I/O Precision Operational Amplifier
PRODUCT DESCRIPTION The SGM8584 is a quad rail-to-rail input and output precision operational amplifier which has low input offset voltage, and bias current. It is guaranteed to operate from 2.5V to 5.5V
More informationSGM321/SGM358/SGM324 1MHz, 60μA, Rail-to-Rail I/O CMOS Operational Amplifiers
/SGM358/SGM324 1MHz, 60μA, Rail-to-Rail I/O CMOS Operational Amplifiers GENERAL DESCRIPTION The (single), SGM358 (dual) and SGM324 (quad) are low cost, rail-to-rail input and output voltage feedback amplifiers.
More informationMCP6021/1R/2/3/4. Rail-to-Rail Input/Output, 10 MHz Op Amps. Features. Description. Typical Applications. Package Types.
Rail-to-Rail Input/Output, 10 MHz Op Amps Features Rail-to-Rail Input/Output Wide Bandwidth: 10 MHz (typ.) Low Noise: 8.7 nv/ Hz, at 10 khz (typ.) Low Offset Voltage: - Industrial Temperature: ±500 µv
More informationSGM8631/2/3 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers
/2/3 6MHz, Rail-to-Rail I/O PRODUCT DESCRIPTION The (single), SGM8632 (dual) and SGM8633 (single with shutdown) are low noise, low voltage, and low power operational amplifiers that can be designed into
More informationMCP6031/2/3/ µa, High Precision Op Amps. Features. Description. Applications. Design Aids. Package Types. Typical Application
0.9 µa, High Precision Op Amps Features Rail-to-Rail Input and Output Low Offset Voltage: ±150 µv (maximum) Ultra Low Quiescent Current: 0.9 µa Wide Power Supply Voltage: 1.8V to 5.5V Gain Bandwidth Product:
More informationMCP6041/2/3/ na, Rail-to-Rail Input/Output Op Amps. Features. Description. Applications. Design Aids. Package Types.
600 na, Rail-to-Rail Input/Output Op Amps Features Low Quiescent Current: 600 na/amplifier Rail-to-Rail Input/Output Gain Bandwidth Product: 14 khz Wide Supply Voltage Range: 1.4V to 6.0V Unity Gain Stable
More informationTABLE OF CONTENTS Features... Applications... Pin Configurations... General Description... Revision History... 2 Specifications... 3 Absolute Maximum
FEATURES Offset voltage: 2.5 mv maximum Single-supply operation: 2.7 V to 5.5 V Low noise: 8 nv/ Hz Wide bandwidth: 24 MHz Slew rate: V/μs Short-circuit output current: 2 ma No phase reversal Low input
More informationMCP6271/1R/2/3/4/ µa, 2 MHz Rail-to-Rail Op Amp. Features. Description. Applications. Available Tools. Package Types
MCP627/R/2/3/4/ 70 µa, 2 MHz Rail-to-Rail Op Amp Features Gain Bandwidth Product: 2 MHz (typical) Supply Current: I Q = 70 µa (typical) Supply Voltage: 2.0V to 6.0V Rail-to-Rail Input/Output Extended Temperature
More information350MHZ CMOS Rail-to-Rail Output Opamps
Features Single-Supply Operation from +2.5V ~ +5.5V Rail-to-Rail Output -3dB Bandwidth(G=+1): 350MHz (Typ.) Low Input Bias Current: 1pA (Typ.) Quiescent Current: 4.2mA/Amplifier (Typ.) Operating Temperature:
More informationSingle/Dual/Quad, +1.8V/750nA, SC70, Rail-to-Rail Op Amps
9-; Rev 4; 7/ Single/Dual/Quad, +.8V/75nA, SC7, General Description The MAX4464/MAX447/MAX447/MAX447/MAX4474 family of micropower op amps operate from a single +.8V to +5.5V supply and draw only 75nA of
More informationAZV831/2. Description. Pin Assignments NEW PRODUCT. Features. Applications
SINGLE/DUAL LOW BIAS CURRENT, LOW VOLTAGE, RAIL-TO-RAIL INPUT/OUTPUT CMOS OPERATIONAL AMPLIFIERS Description Pin Assignments The AZV83/AZV832 is single/dual channels rail-to-rail input and output amplifier,
More informationMCP601/1R/2/3/4. 2.7V to 6.0V Single Supply CMOS Op Amps. Features. Description. Typical Applications. Available Tools.
MCP60/R///4.7V to 6.0V Single Supply CMOS Op Amps Features Single-Supply:.7V to 6.0V Rail-to-Rail Output Input Range Includes Ground Gain Bandwidth Product:.8 MHz Unity-Gain Stable Low Quiescent Current:
More informationSGM8551XN Single-Supply, Single Rail-to-Rail I/O Precision Operational Amplifier
PRODUCT DESCRIPTION The SGM8551XN is a single rail-to-rail input and output precision operational amplifier which has low input offset voltage, and bias current. It is guaranteed to operate from 2.5V to
More informationSGM8705 Micro-Power, CMOS Input, RRIO, 1.4V, Push-Pull Output Comparator
SGM87 Micro-Power, CMOS Input, RRIO, 1.4V, GENERAL DESCRIPTION The SGM87 is a dual low power comparator with a typical power supply current of 3nA (per channel). It has the best-in-class power supply current
More informationSGM8140 Low Power, Vibration Sensor and PIR Sensor Analog Front End (AFE)
SGM814 PRODUCT DESCRIPTION The SGM814 is a PIR sensor and vibration sensor analog front end which consists of 2 independent building block circuits. One is a dual rail-to-rail input and output operational
More informationGT MHz, Low Power, CMOS, EMI Hardened, Rail-to-Rail Quad Operational Amplifier. 1. Features. 2. General Description. 3. Applications A0 1/16
MHz, Low Power, CMOS, EMI Hardened, Rail-to-Rail Quad Operational Amplifier Advanced. Features Single-Supply Operation from +. ~ +5.5 Low Offset oltage: 5m (Max.) Rail-to-Rail Input / Output Quiescent
More informationSON3130 FEATURES PRODUCT DESCRIPTION PIN CONFIGURATION (TOP VIEW) APPLICATIONS
PRODUCT DESCRIPTION The SON313 is designed for heart rate output with SON133(heart rate sensor) offering low cost. It has a wide input common mode voltage range and output voltage swing, and takes the
More informationLow Power, Rail-to-Rail Output, Precision JFET Amplifiers AD8641/AD8642/AD8643
Data Sheet Low Power, Rail-to-Rail Output, Precision JFET Amplifiers AD864/AD8642/AD8643 FEATURES Low supply current: 25 μa max Very low input bias current: pa max Low offset voltage: 75 μv max Single-supply
More informationSGM MHz, 48μA, Rail-to-Rail I/O CMOS Operational Amplifier
PRODUCT DESCRIPTION The is a low cost, single rail-to-rail input and output voltage feedback amplifier. It has a wide input common mode voltage range and output voltage swing, and takes the minimum operating
More informationPrecision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers AD8605/AD8606/AD8608
Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers AD8605/AD8606/AD8608 FEATURES Low offset voltage: 65 μv maximum Low input bias currents: pa maximum Low noise: 8 nv/ Hz Wide
More information24 MHz Rail-to-Rail Amplifiers with Shutdown Option AD8646/AD8647/AD8648
24 MHz Rail-to-Rail Amplifiers with Shutdown Option AD8646/AD8647/AD8648 FEATURES Offset voltage: 2.5 mv maximum Single-supply operation: 2.7 V to 5.5 V Low noise: 8 nv/ Hz Wide bandwidth: 24 MHz Slew
More informationDual, Ultralow Distortion, Ultralow Noise Op Amp AD8599
Dual, Ultralow Distortion, Ultralow Noise Op Amp FEATURES Low noise: 1 nv/ Hz at 1 khz Low distortion: 5 db THD @ khz
More informationAD864/AD8642/AD8643 TABLE OF CONTENTS Specifications... 3 Electrical Characteristics... 3 Absolute Maximum Ratings... 5 ESD Caution... 5 Typical Perfo
FEATURES Low supply current: 25 µa max Very low input bias current: pa max Low offset voltage: 75 µv max Single-supply operation: 5 V to 26 V Dual-supply operation: ±2.5 V to ±3 V Rail-to-rail output Unity-gain
More informationHT9251/HT9252/HT9254 Low Voltage Operational Amplifiers
Low Voltage Operational Amplifiers Features Supply voltage range from 1.8V to 5.5V Supply Current: 50μA/amplifier - typical Rail-to-Rail Input/Output Gain Bandwidth: 550kHz - typical Available in Single
More informationMicropower Precision CMOS Operational Amplifier AD8500
Micropower Precision CMOS Operational Amplifier AD85 FEATURES Supply current: μa maximum Offset voltage: mv maximum Single-supply or dual-supply operation Rail-to-rail input and output No phase reversal
More informationSGM8957-1/SGM V, Micro-Power CMOS Zero-Drift Operational Amplifiers
/SGM8957-2 1.8V, Micro-Power CMOS PRODUCT DESCRIPTION The single and dual SGM8957-2 CMOS operational amplifiers provide very low offset voltage and zero-drift over time and temperature. The miniature,
More informationSingle-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820
Single-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820 FEATURES True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 5
More informationI/O Op Amps with Shutdown
MHz, μa, Rail-to-Rail General Description The single MAX994/MAX995 and dual MAX996/ MAX997 operational amplifiers feature maximized ratio of gain bandwidth to supply current and are ideal for battery-powered
More informationPrecision Micropower Single Supply Operational Amplifier OP777
a FEATURES Low Offset Voltage: 1 V Max Low Input Bias Current: 1 na Max Single-Supply Operation: 2.7 V to 3 V Dual-Supply Operation: 1.35 V to 15 V Low Supply Current: 27 A/Amp Unity Gain Stable No Phase
More informationSGM8925/7 110kHz, 6.4μA, Rail-to-Rail Output CMOS Operational Amplifiers
PRODUCT DESCRIPTION The SGM8925 and SGM8927 are low power, low offset voltage and rail-to-rail output voltage feedback amplifiers. They have a wide output voltage swing, and take the minimum operating
More informationPART. Maxim Integrated Products 1
- + 9-; Rev ; / Low-Cost, High-Slew-Rate, Rail-to-Rail I/O Op Amps in SC7 General Description The MAX9/MAX9/MAX9 single/dual/quad, low-cost CMOS op amps feature Rail-to-Rail input and output capability
More information4 MHz, 7 nv/ Hz, Low Offset and Drift, High Precision Amplifier ADA EP
Enhanced Product FEATURES Low offset voltage and low offset voltage drift Maximum offset voltage: 9 µv at TA = 2 C Maximum offset voltage drift:.2 µv/ C Moisture sensitivity level (MSL) rated Low input
More informationAD8613/AD8617/AD8619. Low Cost Micropower, Low Noise CMOS Rail-to-Rail, Input/Output Operational Amplifiers PIN CONFIGURATIONS FEATURES APPLICATIONS
Low Cost Micropower, Low Noise CMOS Rail-to-Rail, Input/Output Operational Amplifiers FEATURES Offset voltage: 2.2 mv maximum Low input bias current: pa maximum Single-supply operation:.8 V to 5 V Low
More informationLow Cost JFET Input Operational Amplifiers ADTL082/ADTL084
Preliminary Technical Data FEATURES TL082 / TL08 compatible Low input bias current: 0 pa max Offset voltage: 5mV max (ADTL082A/ADTL08A) 9 mv max (ADTL082/ADTL08) ±5 V to ±5 V operation Low noise: 5 nv/
More informationLow Power, Precision, Auto-Zero Op Amps AD8538/AD8539 FEATURES Low offset voltage: 13 μv maximum Input offset drift: 0.03 μv/ C Single-supply operatio
Low Power, Precision, Auto-Zero Op Amps FEATURES Low offset voltage: 3 μv maximum Input offset drift:.3 μv/ C Single-supply operation: 2.7 V to 5.5 V High gain, CMRR, and PSRR Low input bias current: 25
More information16 V, 4 MHz RR0 Amplifiers AD8665/AD8666/AD8668
6 V, MHz RR Amplifiers AD8665/AD8666/AD8668 FEATURES Offset voltage:.5 mv max Low input bias current: pa max Single-supply operation: 5 V to 6 V Dual-supply operation: ±.5 V to ±8 V Low noise: 8 nv/ Hz
More informationVery Low Distortion, Dual-Channel, High Precision Difference Amplifier AD8274 FUNCTIONAL BLOCK DIAGRAM +V S FEATURES APPLICATIONS GENERAL DESCRIPTION
Very Low Distortion, Dual-Channel, High Precision Difference Amplifier AD8273 FEATURES ±4 V HBM ESD Very low distortion.25% THD + N (2 khz).15% THD + N (1 khz) Drives 6 Ω loads Two gain settings Gain of
More informationUNISONIC TECHNOLOGIES CO., LTD LM321
UNISONIC TECHNOLOGIES CO., LTD LM321 LOW POWER SINGLE OP AMP DESCRIPTION The UTC LM321 s quiescent current is only 430µA (5V). The UTC LM321 brings performance and economy to low power systems, With a
More informationTP5551/TP5552 / TP5554
Features Low Offset Voltage: 5 μv (Max) Zero Drift:.5 µv/ C (Max) 1/f Noise Corner Down to.1hz: - - 15 nv/ Hz Input Noise Voltage @1kHz 35 nv P-P Noise Voltage @.1Hz to 1Hz Slew Rate: 2.5 V/μs Bandwidth:
More informationUltraprecision, 36 V, 2.8 nv/ Hz Dual Rail-to-Rail Output Op Amp AD8676
FEATURES Very low voltage noise 2.8 nv/ Hz @ khz Rail-to-rail output swing Low input bias current: 2 na maximum Very low offset voltage: 2 μv typical Low input offset drift:.6 μv/ C maximum Very high gain:
More informationNE/SA5234 Matched quad high-performance low-voltage operational amplifier
INTEGRATED CIRCUITS Supersedes data of 2001 Aug 03 File under Integrated Circuits, IC11 Handbook 2002 Feb 22 DESCRIPTION The is a matched, low voltage, high performance quad operational amplifier. Among
More informationPrecision, Low-Power and Low-Noise Op Amp with RRIO
MAX41 General Description The MAX41 is a low-power, zero-drift operational amplifier available in a space-saving, 6-bump, wafer-level package (WLP). Designed for use in portable consumer, medical, and
More informationEC5462A High Slew Rate Rail-to-Rail Dual Operational Amplifiers
Introduction (General Description) The EC5462A is a rail-to-rail dual channels operational amplifier with wide supply range from 4.5V to 18V. It provides 0.5V beyond the supply rails of common mode input
More informationOutput, 125 C, Operational Amplifiers
Single with Shutdown/Dual/Quad General Purpose, 2.7V, Rail-to-Rail Output, 125 C, Operational Amplifiers General Description Sample and Hold Circuit Silicon Dust is a trademark of National Semiconductor
More informationCLC1011, CLC2011, CLC4011 Low Power, Low Cost, Rail-to-Rail I/O Amplifiers
Comlinear CLC1011, CLC2011, CLC4011 Low Power, Low Cost, Rail-to-Rail I/O Amplifiers Amplify the Human Experience F E A T U R E S n 136μA supply current n 4.9MHz bandwidth n Output swings to within 20mV
More informationUNISONIC TECHNOLOGIES CO., LTD UM609A
UNISONIC TECHNOLOGIES CO., LTD DUAL OPERATIONAL AMPLIFIER AND CURRENT CONTROLLER DESCRIPTION The UTC is a monolithic IC that includes one independent op-amp and another op-amp for witch the non inverting
More informationPrecision, High-Bandwidth Op Amp
EVALUATION KIT AVAILABLE MAX9622 General Description The MAX9622 op amp features rail-to-rail output and MHz GBW at just 1mA supply current. At power-up, this device autocalibrates its input offset voltage
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD DUAL OPERATIONAL AMPLIFIER DESCRIPTION The UTC LM358 consists of two independent high gain, internally frequency compensated operational amplifier. It can be operated from
More informationMCP6001/1R/1U/2/4. 1 MHz, Low-Power Op Amp. Features. Description. Applications. Package Types. Design Aids. Typical Application
MCP600/R/U// MHz, LowPower Op Amp Features Available in SC705 and SOT5 packages Gain Bandwidth Product: MHz (typical) RailtoRail Input/Output Supply Voltage:.8V to 6.0V Supply Current: I Q = 00 µa (typical)
More informationSingle-Supply, 150MHz, 16-Bit Accurate, Ultra-Low Distortion Op Amps
9-; Rev ; /8 Single-Supply, 5MHz, 6-Bit Accurate, General Description The MAX4434/MAX4435 single and MAX4436/MAX4437 dual operational amplifiers feature wide bandwidth, 6- bit settling time in 3ns, and
More informationNot Recommended for New Designs
Not Recommended for New Designs This product was manufactured for Maxim by an outside wafer foundry using a process that is no longer available. It is not recommended for new designs. The data sheet remains
More informationNJU7026/NJU7027/NJU7028
NJU76/NJU77/NJU78 μa/ch, Rail-to-Rail Output CMOS Operational Amplifier FEATURES (V + =5V, V - =V, Ta=5 C, typ.) Supply Current (All Amplifiers) NJU76 µa NJU77 6µA NJU78 8µA Supply Voltage.8V to 5.5V Gain
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD GENERAL PURPOSE, LOW VOLTAGE, RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS DESCRIPTION The UTC LV358 is a dual op amp with low supply current and low voltage (2.7-5.5V). It
More informationRC4741 General Purpose Operation Amplifier
General Purpose Operation Amplifier www.fairchildsemi.com Features Unity gain bandwidth 3. MHz High slew rate 1.6 V/mS Low noise voltage 9 nv/öhz Input offset voltage. mv Input bias current 6 na Indefinite
More informationCLC2011, CLC4011 Low Power, Low Cost, Rail-to-Rail I/O Amplifiers
Low Power, Low Cost, Rail-to-Rail I/O Amplifiers General Description The CLC2011 (dual) and CLC4011 (quad) are ultra-low cost, low power, voltage feedback amplifiers. At 2.7V, the CLCx011 family uses only
More informationSGM8701 Micro-Power, CMOS Input, RRIO, 1.4V, Push-Pull Output Comparator
SGM871 GENERAL DESCRIPTION The SGM871 is an ultra low power comparator with a typical power supply current of 3nA. It has the best-in-class power supply current versus propagation delay performance. The
More information15 MHz, Rail-to-Rail, Dual Operational Amplifier OP262-EP
5 MHz, Rail-to-Rail, Dual Operational Amplifier OP262-EP FEATURES Supports defense and aerospace applications (AQEC standard) Military temperature range ( 55 C to +25 C) Controlled manufacturing baseline
More informationnanopower Op Amp in a Tiny 6-Bump WLP
EVALUATION KIT AVAILABLE MAX4464 General Description The MAX4464 is an ultra-small (6-bump WLP) op amp that draws only 75nA of supply current. It operates from a single +.8V to +5.5V supply and features
More informationMCP6541/1R/1U/2/3/4. Push-Pull Output Sub-Microamp Comparators. Features. Description. Typical Applications. Related Devices.
PushPull Output SubMicroamp Comparators Features Low Quiescent Current: 600 na/comparator (typ.) RailtoRail Input: 0.V to 0.V CMOS/TTLCompatible Output Propagation Delay: µs (typ., 00 mv Overdrive) Wide
More informationUltraprecision, 36 V, 2.8 nv/ Hz Dual Rail-to-Rail Output Op Amp AD8676
Ultraprecision, 36 V, 2. nv/ Hz Dual Rail-to-Rail Output Op Amp AD676 FEATURES Very low voltage noise: 2. nv/ Hz @ khz Rail-to-rail output swing Low input bias current: 2 na maximum Very low offset voltage:
More informationLow-Power Single/Dual, Rail-to-Rail Op Amps
19-532; Rev ; 8/1 Low-Power Single/Dual, Rail-to-Rail Op Amps General Description The are low-power precision op amps that feature precision MOS inputs. These devices are ideal for a large number of signal
More informationSGM721 SGM722 SGM723 SGM µA, 10MHz, Rail-to-Rail I/O CMOS Operational Amplifier FEATURES PRODUCT DESCRIPTION. PIN CONFIGURATIONS (Top View)
SGM7 SGM7 SGM73 SGM74 PRODUCT DESCRIPTION The SGM7 (single), SGM7 (dual), SGM73 (single with shutdown) and SGM74 (quad) are low noise, low voltage, and low power operational amplifiers, that can be designed
More informationMIC915. Features. General Description. Applications. Ordering Information. Pin Configuration. Pin Description. Dual 135MHz Low-Power Op Amp
MIC915 Dual 135MHz Low-Power Op Amp General Description The MIC915 is a high-speed, unity-gain stable operational amplifier. It provides a gain-bandwidth product of 135MHz with a very low, 2.4mA supply
More information150 μv Maximum Offset Voltage Op Amp OP07D
5 μv Maximum Offset Voltage Op Amp OP7D FEATURES Low offset voltage: 5 µv max Input offset drift:.5 µv/ C max Low noise:.25 μv p-p High gain CMRR and PSRR: 5 db min Low supply current:. ma Wide supply
More informationHIGH SPEED SINGLE SUPPLY OPERATIONAL AMPLIFIER V + B OUTPUT B -INPUT B +INPUT SOP8 SSOP8 MSOP8(VSP8) SOP14 SSOP14
HIGH SPEED SINGLE SUPPLY OPERATIONAL AMPLIFIER FEATURES High Slew Rate 10V/µs High Bandwidth 3MHz High Unity Gain Frequency 3.6MHz Input Offset Voltage 5.5mV max. Single Supply 3V to 36V Operating Temperature
More informationLow-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs
9-824; Rev ; /5 Low-Cost, +3V/+5V, 62µA, 2MHz, General Description The MAX4452/MAX4352 single, MAX4453/MAX4353 dual, and / quad amplifiers combine high-speed performance with ultra-low power consumption.
More informationV OUT. +Denotes lead(pb)-free/rohs-compliant package. PART
9-346; Rev 2; / 2kHz, 4µA, Rail-to-Rail General Description The single MAX99/MAX99 and dual MAX992/ MAX993 operational amplifiers (op amps) feature a maximized ratio of gain bandwidth (GBW) to supply current
More informationLMC660 CMOS Quad Operational Amplifier
CMOS Quad Operational Amplifier General Description The LMC660 CMOS Quad operational amplifier is ideal for operation from a single supply. It operates from +5V to +15.5V and features rail-to-rail output
More informationNanopower Op Amp in Ultra-Tiny WLP and SOT23 Packages
EVALUATION KIT AVAILABLE MAX47 General Description The MAX47 is a single operational amplifier that provides a maximized ratio of gain bandwidth (GBW) to supply current and is ideal for battery-powered
More informationGeneral-Purpose CMOS Rail-to-Rail Amplifiers AD8541/AD8542/AD8544
General-Purpose CMOS Rail-to-Rail Amplifiers AD854/AD8542/AD8544 FEATURES Single-supply operation: 2.7 V to 5.5 V Low supply current: 45 μa/amplifier Wide bandwidth: MHz No phase reversal Low input currents:
More informationXR1009, XR mA, 35MHz Rail-to-Rail Amplifiers
0.2mA, 35MHz RailtoRail Amplifiers General Description The XR1009 (single) and XR2009 (dual) are ultralow power, low cost, voltage feedback amplifiers. These amplifiers use only 208μA of supply current
More informationSingle and Dual, Ultralow Distortion, Ultralow Noise Op Amps AD8597/AD8599 PIN CONFIGURATIONS FEATURES APPLICATIONS
Single and Dual, Ultralow Distortion, Ultralow Noise Op Amps FEATURES Low noise:. nv/ Hz at khz Low distortion: db THD @ khz Input noise,. Hz to Hz:
More information17µA Max, Dual/Quad, Single-Supply, Precision Op Amps
19-127; Rev. 1; 11/98 General Description The MAX478 and MAX479 are dual and quad micropower, precision op amps available in 8-pin and 14-pin DIP and small-outline packages, respectively. Both devices
More informationLMV321, LMV358, LMV324 General Purpose, Low Voltage, Rail-to-Rail Output Amplifiers
www.fairchildsemi.com LMV31, LMV358, LMV34 General Purpose, Low Voltage, RailtoRail Output Amplifiers Features at.7v 80µA supply current per channel 1.MHz gain bandwidth product Output voltage range: 0.01V
More informationTSV611, TSV611A, TSV612, TSV612A
TSV611, TSV611A, TSV612, TSV612A Rail-to-rail input/output 10 µa, 120 khz CMOS operational amplifiers Applications Datasheet - production data Out1 1 In1-2 In1+ 3 TSV611ILT - TSV611ICT In+ 1 5 V CC+ +
More information16 V, 1 MHz, CMOS Rail-to-Rail Input/Output Operational Amplifier ADA4665-2
6 V, MHz, CMOS Rail-to-Rail Input/Output Operational Amplifier ADA4665-2 FEATURES Lower power at high voltage: 29 μa per amplifier typical Low input bias current: pa maximum Wide bandwidth:.2 MHz typical
More informationEC kHz, 7μA, CMOS, Rail-to-Rail Operational Amplifier. General Description. Features. Applications. Pin Assignments
General Description Features The is a single supply, low power CMOS operational amplifier; these amplifiers offer bandwidth of 250kHz, rail-to-rail inputs and outputs, and single-supply operation from
More information1.0V Micropower, SOT23, Operational Amplifier
19-3; Rev ; 1/ 1.V Micropower, SOT3, Operational Amplifier General Description The micropower, operational amplifier is optimized for ultra-low supply voltage operation. The amplifier consumes only 9µA
More informationEC MHz, CMOS, Rail-to-Rail Output Operational Amplifier. General Description. Features. Applications. Pin Configurations(Top View)
General Description The is wideband, low-noise, low-distortion operational amplifier, that offer rail-to-rail output and single-supply operation down to 2.2V. They draw 5.6mA of quiescent supply current,
More informationMIC7122. General Description. Features. Applications. Ordering Information. Pin Configuration. Pin Description. Rail-to-Rail Dual Op Amp
MIC722 Rail-to-Rail Dual Op Amp General Description The MIC722 is a dual high-performance CMOS operational amplifier featuring rail-to-rail inputs and outputs. The input common-mode range extends beyond
More informationLow Cost JFET Input Operational Amplifiers ADTL082/ADTL084
Low Cost JFET Input Operational Amplifiers ADTL/ADTL FEATURES TL/TL compatible Low input bias current: pa maximum Offset voltage 5.5 mv maximum (ADTLA/ADTLA) 9 mv maximum (ADTLJ/ADTLJ) ±5 V operation Low
More information200MHz, High Speed, CMOS, Rail-to-Rail Operational Amplifier. Low Offset Voltage: 10mV (Max.) Rail-to-Rail Input / Output
00MHz, High Speed, CMOS, Rail-to-Rail Operational Amplifier Advanced. Features Single-Supply Operation from +.5 ~ +5.5 Low Offset oltage: 0m (Max.) Rail-to-Rail Input / Output Quiescent Current:7.8mA (Typ.)
More informationZero Drift, Digitally Programmable Instrumentation Amplifier AD8231-EP OP FUNCTIONAL BLOCK DIAGRAM FEATURES ENHANCED PRODUCT FEATURES
Zero Drift, Digitally Programmable Instrumentation Amplifier AD8231-EP FEATURES Digitally/pin-programmable gain G = 1, 2, 4, 8, 16, 32, 64, or 128 Specified from 55 C to +125 C 5 nv/ C maximum input offset
More informationEVALUATION KIT AVAILABLE Precision, High-Bandwidth Op Amp
19-227; Rev ; 9/1 EVALUATION KIT AVAILABLE Precision, High-Bandwidth Op Amp General Description The op amp features rail-to-rail output and MHz GBW at just 1mA supply current. At power-up, this device
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD SINGLE GENERAL PURPOSE, LOW VOLTAGE, RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIER DESCRIPTION The UTC LV321 is a single op amp with low supply current. It brings good performance
More informationNCS2005. Operational Amplifier, Low Power, 8 MHz GBW, Rail-to-Rail Input-Output
Operational Amplifier, Low Power, 8 MHz GBW, Rail-to-Rail Input-Output The provides high performance in a wide range of applications. The offers beyond rail to rail input range, full rail to rail output
More information1.8 V, Micropower, Zero-Drift, Rail-to-Rail Input/Output Op Amp ADA4051-2
.8 V, Micropower, Zero-Drift, Rail-to-Rail Input/Output Op Amp ADA45-2 FEATURES Very low supply current: 3 μa Low offset voltage: 5 μv maximum Offset voltage drift: 2 nv/ C Single-supply operation:.8 V
More informationAPX358/APX324 LOW VOLTAGE, RAIL-TO-RAIL INPUT AND OUTPUT DUAL/QUAD OPERATIONAL AMPLIFIERS
Features General Description (For V + =5V and V - =0V typical unless otherwise noted) Guaranteed 2.7V and 5V performance Crossover distortion eliminated Operating temperature range (-40 C to +85 C) Gain-bandwidth
More informationDIO Vrms Audio Driver with Adjustable Gain
Rev.2 Features Voltage Output at 600Ω Load 2Vrms with 3.3V supply voltage 3Vrms with 5.0V supply voltage Ultra Low noise and THD SNR>2dB Typical Vn00dB No Pop/Clicks Noise when Power ON/OFF
More informationFHP3350, FHP3450 Triple and Quad Voltage Feedback Amplifiers
FHP335, FHP345 Triple and Quad Voltage Feedback Amplifiers Features.dB gain flatness to 3MHz.7%/.3 differential gain/phase error 2MHz full power -3dB bandwidth at G = 2,V/μs slew rate ±55mA output current
More informationNJU7046/NJU7047/NJU7048
NJU76/NJU77/NJU7 9V/μs High-Speed, Rail-to-rail I/O CMOS Operational Amplifier FEATURES (V + =V, V - =V, Ta= C) High Slew Rate 9V/µs Wide Bandwidth MHz Low Input Bias Current pa Rail-to-Rail Input and
More informationELM824xA 3.0μA Very low power CMOS dual operational amplifier
ELM824xA 3.μA Very low power CMOS dual operational amplifier General description ELM824xA is a very low current consumption-typ.3.μa CMOS dual OP-AMP provided with a wide common mode input voltage range.
More informationLow-Cost, Low-Power, Ultra-Small, 3V/5V, 500MHz Single-Supply Op Amps with Rail-to-Rail Outputs
9-83; Rev ; / Low-Cost, Low-Power, Ultra-Small, 3V/5V, 5MHz General Description The MAX442 single and MAX443 dual operational amplifiers are unity-gain-stable devices that combine high-speed performance,
More information