Title page, Product innovations Product innovations. 14 OBO Neuheiten 2016 / en / 01/03/2016 (LLExport_04360) / 01/03/2016

Transcription

1 Title page, Product innovations 206 Product innovations 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 Catalogue 206

2 Through our products, we create connections around the world. Experience the perfect interplay of new and well-seasoned solutions for electrical installations and find out about the latest innovations. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 2

3 Contents VBS Connection and fastening systems 5 TBS Transient and lightning protection systems 3 KTS Cable support systems 63 BSS Fire protection systems 87 LFS Cable routing systems 09 EGS Device systems 39 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 UFS Underfloor systems 47 Directories 69 3

4 4 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206

5 VBS product innovations Junction box systems 8 Terminal systems 4 Cable gland systems 8 Cable/pipe fastening systems, metal 20 Cable/pipe fastening systems, special 22 Pipe systems 23 Support clamp systems 24 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 5

6 Simple and particularly flexible installation VBS Thanks to the use of high-quality special plastics, the new OBO SDB series can cover all the requirements for modern small distributors. In addition, it stands out through its simple and particularly flexible installation. Flexible fastening The housing can be attached using internal, external or corner fastenings, as required. Simply plugged-in Innovative PE/N terminal with x 25 2 screw terminal x 6 2 screw terminal 2 x 4 2 screwless terminals 2 x screwless terminals Shock-resistant in any position The SDB small distributors from OBO Bettermann are tough customers. OBO has only just added the versatile plastic housing to its range of products. This is characterised by its robustness and reliability. In the tough environment of industrial production, they ensure that power is available at any time. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 6

7 L L L L2 L2 L2L3L3L3N ON ON OFF OFF EXIT FI RCD FI RCD FI RCD FI RCD Practical details A B EN IEC C D E U = I e f e = = V A Hz VBS The practical adhesive labelling sheets with self-adhesive pictograms ensure tidy, simple labelling of the installation. Four sizes The four sizes with three, five, nine or twelve division units offer flexible installation space for devices on hat rails. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 Perfect handling The robust locking contour can be opened and closed easily perfect for daily use in the hard world of industry. 7

8 Junction box systems Small distributor, 3 division units, with screwless terminal VBS SDB 03 PC PC Polycarbonate Dimension L x W x H Light grey 50x90x25 kg/ Surface-mounted small distributed, with protective insulation for max. 3 division units. There are 3 breakout openings (2x Ø20 and x Ø20/25) on both the upper and lower sides incl. pre-mounted 35 hat profile support rail. The four screw cover caps supplied prevent unwanted "voltage carryover". Suitable for interior and exterior mounting; VDE-tested to DIN EN 60439; Accessories: Terminal strip set consisting of: One PE/N terminal (x25² and x6² screw terminal points;, 2x4² and 2x2.5² screwless terminals), mini hat profile rail, mounting instructions and fastening set Self-adhesive pictograms for installation labelling; Two elastic cable entries Ø20 for cable diameters 0 7 One elastic cable entry Ø25 for cable diameter 0 22 Two stainless steel external fastenings Cover strip for closing off unused separation units Small distributor, 3 division units, with screw terminal Dimension L x W x H kg/00. SDB 03 PS Light grey 50x90x25 8, PS Polystyrene Surface-mounted small distributed, with protective insulation for max. 3 division units. There are 3 breakout openings (2x Ø20 and x Ø20/25) on both the upper and lower sides incl. pre-mounted 35 hat profile support rail. The four screw cover caps supplied prevent unwanted "voltage carryover". Suitable for interior and protected exterior mounting; Accessories: Terminal strip set consisting of: One PE/N terminals with 4x 6 ² screw terminal points, mini hat profile rail, mounting instructions and fastening set Self-adhesive pictograms for installation labelling and labelling of the connected consumers; Two elastic cable entries Ø20 for cable diameters 0 7 One elastic cable entry Ø25 for cable diameter 0 22 Small distributor, 3 division units, empty Dimension L x W x H kg/00. SDB 03L PC Light grey 50x90x25 78, SDB 03L PS Light grey 50x90x25 69, PS Polystyrene PC Polycarbonate Surface-mounted small distributed, with protective insulation for max. 3 division units. There are 3 breakout openings (2x Ø20 and x Ø20/25) on both the upper and lower sides incl. pre-mounted 35 hat profile support rail. The four screw cover caps supplied prevent unwanted "voltage carryover". The PS small distributors are suitable for mounting in interiors and in protected exteriors. The PC small distributors are suitable for mounting for interior and exterior use. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 8

9 Junction box systems Small distributor, 5 division units, with screwless terminal SDB 05 PC Dimension L x W x H Light grey 90x50x25 kg/ PC Polycarbonate Surface-mounted small distributed, with protective insulation for max. 5 division units. There are 5 breakout openings (4x Ø20 and x Ø20/25) on both the upper and lower sides incl. pre-mounted 35 hat profile support rail. The four screw cover caps supplied prevent unwanted "voltage carryover". Suitable for interior and exterior mounting; VDE-tested to DIN EN 60439; Accessories: Terminal strip set consisting of: One PE/N terminal (x25² and x6² screw terminal points;, 2x4² and 2x2.5² screwless terminals), mini hat profile rail, mounting instructions and fastening set Self-adhesive pictograms for installation labelling; Four elastic cable entries Ø20 for cable diameters 0 7 One elastic cable entry Ø25 for cable diameter 0 22 Two stainless steel external fastenings Cover strip for closing off unused separation units VBS Small distributor, 5 division units, with screw terminal Dimension L x W x H SDB 05 PS Light grey 90x50x25 PS Polystyrene kg/00. 8, Surface-mounted small distributed, with protective insulation for max. 5 division units. There are 5 breakout openings (4x Ø20 and x Ø20/25) on both the upper and lower sides incl. pre-mounted 35 hat profile support rail. The four screw cover caps supplied prevent unwanted "voltage carryover". Suitable for interior and protected exterior mounting; Accessories: Terminal strip set consisting of: One PE/N terminals with 4x 6 ² screw terminal points, mini hat profile rail, mounting instructions and fastening set Self-adhesive pictograms for installation labelling and labelling of the connected consumers; Four elastic cable entries Ø20 for cable diameters 0 7 One elastic cable entry Ø25 for cable diameter 0 22 Small distributor, 5 division units, empty 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 Dimension L x W x H kg/00. SDB 05L PC Light grey 90x50x25 78, SDB 05L PS Light grey 90x50x25 69, PS Polystyrene PC Polycarbonate Surface-mounted small distributed, with protective insulation for max. 5 division units. There are 5 breakout openings (4x Ø20 and x Ø20/25) on both the upper and lower sides incl. pre-mounted 35 hat profile support rail. The four screw cover caps supplied prevent unwanted "voltage carryover". The PS small distributors are suitable for mounting in interiors and in protected exteriors. The PC small distributors are suitable for mounting for interior and exterior use. 9

10 Junction box systems Small distributor, 9 division units, with screwless terminal VBS SDB 09 PC PC Polycarbonate Dimension L x W x H Light grey 240x9x25 kg/ Surface-mounted small distributor, with protective insulation for max. 9 division units. There are 9 breakout openings (8x Ø20 and x Ø20/25/32) on both the upper and lower sides incl. pre-mounted 35 hat profile support rail. The four screw cover caps supplied prevent unwanted "voltage carryover". Suitable for interior and protected exterior mounting; Accessories: Terminal strip set consisting of: Three PE/N terminals each with 4x 6 ² screw terminal points, mini hat profile rail, mounting instructions and fastening set Self-adhesive pictograms for installation labelling and labelling of the connected consumers; Eight elastic cable entries Ø20 for cable diameters 0 7 One elastic cable entry Ø25 for cable diameter 0 22 One elastic cable entry Ø32 for cable diameter 0 28 Small distributor, 9 division units, with screw terminal Dimension L x W x H kg/00. SDB 09 PS Light grey 240x9x25 0, PS Polystyrene Surface-mounted small distributor, with protective insulation for max. 9 division units. There are 9 breakout openings (8x Ø20 and x Ø20/25/32) on both the upper and lower sides incl. pre-mounted 35 hat profile support rail. The four screw cover caps supplied prevent unwanted "voltage carryover". Suitable for interior and protected exterior mounting; Accessories: Terminal strip set consisting of: Two PE/N terminals each with 4x 6 ² screw terminal points, mini hat profile rail, mounting instructions and fastening set Self-adhesive pictograms for installation labelling and labelling of the connected consumers; Six elastic cable entries Ø20 for cable diameters 0 7 One elastic cable entry Ø25 for cable diameter 0 22 One elastic cable entry Ø32 for cable diameter 0 28 Small distributor, 9 division units, empty Dimension L x W x H kg/00. SDB 09L PS Light grey 240x9x25 96, SDB 09L PC Light grey 240x9x25 08, PS Polystyrene PC Polycarbonate Surface-mounted small distributor, with protective insulation for max. 9 division units. There are 9 breakout openings (8x Ø20 and x Ø20/25/32) on both the upper and lower sides incl. pre-mounted 35 hat profile support rail. The four screw cover caps supplied prevent unwanted "voltage carryover". The PS small distributors are suitable for mounting in interiors and in protected exteriors. The PC small distributors are suitable for mounting for interior and exterior use. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 0

11 Junction box systems Small distributor, 2 division units, with screwless terminal SDB 2 PC Dimension L x W x H Light grey 286x202x25 kg/ PC Polycarbonate Surface-mounted small distributor, with protective insulation for max. 2 division units. There are breakout openings (0x Ø20 and x Ø20/25/32) on both the upper and lower sides incl. pre-mounted 35 hat profile support rail. The four screw cover caps supplied prevent unwanted "voltage carryover". Suitable for interior and protected exterior mounting; Accessories: Terminal strip set consisting of: Three PE/N terminals each with 4x 6 ² screw terminal points, mini hat profile rail, mounting instructions and fastening set Self-adhesive pictograms for installation labelling and labelling of the connected consumers; Eight elastic cable entries Ø20 for cable diameters 0 7 One elastic cable entry Ø25 for cable diameter 0 22 One elastic cable entry Ø32 for cable diameter 0 28 VBS Small distributor, 2 division units, with screw terminal Dimension L x W x H SDB 2 PS Light grey 286x202x25 PS Polystyrene kg/00. 4, Surface-mounted small distributor, with protective insulation for max. 2 division units. There are breakout openings (0x Ø20 and x Ø20/25/32) on both the upper and lower sides incl. pre-mounted 35 hat profile support rail. The four screw cover caps supplied prevent unwanted "voltage carryover". Suitable for interior and protected exterior mounting; Accessories: Terminal strip set consisting of: Three PE/N terminals each with 4x 6 ² screw terminal points, mini hat profile rail, mounting instructions and fastening set Self-adhesive pictograms for installation labelling and labelling of the connected consumers; Eight elastic cable entries Ø20 for cable diameters 0 7 One elastic cable entry Ø25 for cable diameter 0 22 One elastic cable entry Ø32 for cable diameter 0 28 Small distributor, 2 division units, empty 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 Dimension L x W x H kg/00. SDB 2L PS Light grey 286x202x25 20, SDB 2L PC Light grey 286x202x25 34, PS Polystyrene PC Polycarbonate Surface-mounted small distributor, with protective insulation for max. 2 division units. There are breakout openings (0x Ø20 and x Ø20/25/32) on both the upper and lower sides incl. pre-mounted 35 hat profile support rail. The four screw cover caps supplied prevent unwanted "voltage carryover". The PS small distributors are suitable for mounting in interiors and in protected exteriors. The PC small distributors are suitable for mounting for interior and exterior use.

12 Junction box systems Junction box T 60 with plug-in seal and three cable glands VBS Dimensions Version Entries T 60 M25 NL With cable glands PP Polypropylene 7 x M25 Light grey 60 Shipping box 5 kg/00. 4, /00 pc. All the T series junction boxes are UV-resistant. They are made of a thermoplastic polypropylene plastic with plug-in seals made of ethylene vinyl acetate (EVA). This plastic is soft, which means that it is malleable. This allows installation of cables through the 7 x M25 seals, or the seals can be cut with a knife at the pre-marked points, in order to create an insertion opening for cables or pipes. Alternatively, instead of seals, cable glands can be inserted through the openings and be countered internally with a locknut. The junction boxes can be mounted on mounting plates in the openings on the floor using steel bolts 3.5 x 9.5. Clear internal dimensions: 00 x 00 x 48 Cover with labelling panel and lead-sealed. Junction box T 00 WB3, for Wieland sockets, 3-pole, max. 0x 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 Dimensions T 00 WB PP Polypropylene All the T series junction boxes are UV-resistant. They are made of polypropylene (a thermoplastic polymer) and are equipped with strain relief entries and pre-terminated Wieland connection sockets, type GST-8-i3 (s = black, w = white, r = red). The strain relief entries can be penetrated directly with the cables. The special structure of the opening means that the cables cannot be removed unintentionally. Suitable for cable diameters of between 7 and 2. The junction boxes can be mounted on mounting plates in the openings on the floor using steel bolts 3.5 x 9.5. Cover with labelling panel and lead seal. Caution: According to standard VDE 0620-: Installation only by people with the relevant electrical knowledge and experience. There is danger to life if installed incorrectly. 2

13 Junction box systems Aquasit cold casting compound with cable box T40 T 40 KVM Shipping box Version Entries With terminal strip 7 x M25 kg/00. 48, PP Polypropylene Aquasit is a two-component casting compound in a cartridge, for applications in areas with continuous and extremely high levels of moisture. It can also be used against mechanical shock and vibrations. The cartridge is suitable for use in standard cartridge pistols. At room temperature, the unopened aluminium packaging can be stored for up to 8 months. When the cartridge is opened, the material should be used within 24 hours. Practical experience, tests and approvals valid only in conjunction with OBO junction boxes. Aquasit properties: Protection rating with appropriate junction box: IP68 at.8 bar/,000 hrs Rated voltage: 400 V Penetration resistance: >20 kv/ to VDE 029 Part 2 Operating temperature: -40 to +90 C Processing temperature: 0 to +40 C Halogen-free, silicon-free, isocyanate-free Environmentally friendly and without the need to be labelled Dimensions 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 VBS 3

14 Terminal systems Terminal strip set with screw terminals for SDB 03 VBS KLS-SDB Terminal strip set for the small distributors of the SDB series. The sets can be used to expand and equip the empty boxes of the SDB series. The terminal strip set with screw terminals contains: Mounting instructions; hat rail with corresponding support and fastening material; 6 ² protective conductor terminal; 6 ² neutral conductor terminal Terminal strip set with screw terminals for SDB 05 KLS-SDB Terminal strip set for the small distributors of the SDB series. The sets can be used to expand and equip the empty boxes of the SDB series. The terminal strip set with screw terminals contains: Mounting instructions; hat rail with corresponding support and fastening material; 6 ² protective conductor terminal; 6 ² neutral conductor terminal Terminal strip set with screw terminals for SDB 09 KLS-SDB Terminal strip set for the small distributors of the SDB series. The sets can be used to expand and equip the empty boxes of the SDB series. The terminal strip set with screw terminals contains: Mounting instructions; hat rail with corresponding support and fastening material; 6 ² protective conductor terminal; 6 ² neutral conductor terminal Terminal strip set with screw terminals for SDB 2 KLS-SDB Terminal strip set for the small distributors of the SDB series. The sets can be used to expand and equip the empty boxes of the SDB series. The terminal strip set with screw terminals contains: Mounting instructions; hat rail with corresponding support and fastening material; 6 ² protective conductor terminal; 6 ² neutral conductor terminal 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 4

15 Terminal systems Terminal strip set with screwless terminals for SDB 03 KLS-SDB 03S Terminal strip set for the small distributors of the SDB series. The sets can be used to expand and equip the empty boxes of the SDB series. With the terminal strips, you can choose between screw terminals and screwless terminals. The terminal strip set with screw / screwless terminals contains: Mounting instructions; cover strip; hat rail with corresponding support and fastening material; one protective conductor terminal and one neutral conductor terminal with two 6/25 ² terminals and ² screwless terminals VBS KLS-SDB 05S Terminal strip set with screwless terminals for SDB Terminal strip set for the small distributors of the SDB series. The sets can be used to expand and equip the empty boxes of the SDB series. With the terminal strips, you can choose between screw terminals and screwless terminals. The terminal strip set with screw / screwless terminals contains: Mounting instructions; cover strip; hat rail with corresponding support and fastening material; one protective conductor terminal and one neutral conductor terminal with two 6/25 ² terminals and ² screwless terminals KLS-SDB 09S Terminal strip set with screwless terminals for SDB Terminal strip set for the small distributors of the SDB series. The sets can be used to expand and equip the empty boxes of the SDB series. With the terminal strips, you can choose between screw terminals and screwless terminals. The terminal strip set with screw / screwless terminals contains: Mounting instructions; cover strip; hat rail with corresponding support and fastening material; one protective conductor terminal and one neutral conductor terminal with two 6/25 ² terminals and ² screwless terminals 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 KLS-SDB 2S Terminal strip set with screwless terminals for SDB Terminal strip set for the small distributors of the SDB series. The sets can be used to expand and equip the empty boxes of the SDB series. With the terminal strips, you can choose between screw terminals and screwless terminals. The terminal strip set with screw / screwless terminals contains: Mounting instructions; cover strip; hat rail with corresponding support and fastening material; one protective conductor terminal and one neutral conductor terminal with two 6/25 ² terminals and ² screwless terminals 5

16 Terminal systems Protective conductor terminal, with screwless contacts, 2 terminals VBS KL-DBS2x02GRGN PA Polyamide Shipping box Grey / green kg/00. 4, Protective conductor connection terminal with ² screwless terminal points; two 4 ² screwless terminal points and two 6/25 ² screw connection terminal points. For snapping onto 5 hat rails to DIN EN /00 pc. Neutral conductor terminal, with screwless contacts, 2 terminals Shipping box kg/00. KL-DBN2x02GRBL Grey / blue , PA Polyamide /00 pc. Protective conductor connection terminal with ² screwless terminal points; two 4 ² screwless terminal points and two 6/25 ² screw connection terminal points. For snapping onto 5 hat rails to DIN EN Phase terminal, with screwless contacts, 2 terminals Shipping box kg/00. KL-DBP2x02GR Grey , PA Polyamide Phase connection terminal with ² screwless terminal points; two 4 ² screwless terminal points and two 6/25 ² screw connection terminal points. For snapping onto 5 hat rails to DIN EN Protective conductor terminal, with screw contacts, 4 terminals Shipping box kg/00. KL-DBS4x6GN Green 20 0, PA Polyamide /00 pc. Protective conductor brass connection terminal strip, steel screws, electrogalvanised and transparently passivated, nominal cross-section 6-6 ², nominal voltage 400 V, -pole, with terminal sockets, max. connectable conductors per terminal max. 4 x 6 ², 4 x 0 ², 8 x 6 ² or 2 x 4 ². 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 6

17 Terminal systems Neutral conductor terminal, with screw contacts, 4 terminals KL-DBN4x6BL Shipping box Blue 20 0 kg/00., PA Polyamide /00 pc. Neutral conductor brass connection terminal, steel screws, electrogalvanised and transparently passivated, nominal cross-section 6-6 ², nominal voltage 400 V, -pole, with terminal sockets, max. connectable conductors per terminal max. 4 x 6 ², 4 x 0 ², 8 x 6 ² or 2 x 4 ². 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 VBS 7

18 Cable gland systems Divisible cable gland, seal insert enclosed M25x,5 V-TEC TB VBS SW35 PC Polycarbonate The V-TEC TB.. ensures - like all V-TEC glands - a secure sealing of the cable. The fact that the cable gland is separable means that it is easy and quick to install for instance pre-terminated cables. A further benefit is the option of retrofitting cables in existing installations. It is also unbeatable as a "repair gland", there is no need of disassembling premounted cables, it can be installed without interrupting the production process. The closed sealing insert provides the option to universally drill the required sealing diameter(s). The ideal aiding tools are the spreading pliers which can be used to open the sealing insert. Placing the individual cables becomes easy quick. Divisible cable gland, seal insert, cable 9 0 D 39 SW35 M25x,5 V-TEC TB V-TEC TB V-TEC TB25-5 V-TEC TB V-TEC TB PC Polycarbonate The V-TEC TB.. ensures - like all V-TEC glands - a secure sealing of the cable. The fact that the cable gland is separable means that it is easy and quick to install for instance pre-terminated cables. A further benefit is the option of retrofitting cables in existing installations. It is also unbeatable as a "repair gland", there is no need of disassembling premounted cables, it can be installed without interrupting the production process. The various sealing inserts provide the option to seal cables of 7 to 20.5 depending on the selected sealing insert. The ideal aiding tools are the spreading pliers which can be used to open the sealing insert. Placing the individual cables becomes easy and quick. Divisible cable gland, seal insert, multiple Dimensions 9 0 D 39 M25x,5 SW35 V-TEC TB25 3x9 V-TEC TB25 4x8 PC Polycarbonate The V-TEC TB.. ensures - like all V-TEC glands - a secure sealing of the cable. The fact that the cable gland is separable means that it is easy and quick to install for instance pre-terminated cables. A further benefit is the option of retrofitting cables in existing installations. It is also unbeatable as a "repair gland", there is no need of disassembling premounted cables, it can be installed without interrupting the production process. When using a multiple sealing insert, several cables/wires can be led and sealed through a gland. Not required drill holes have to be closed with a plug. The ideal aiding tools are the spreading pliers which can be used to open the sealing insert. Placing the individual cables becomes easy and quick. G Drill holes D SW E Quantity M25 x M25 x OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 8

19 Cable gland systems Spreading pliers for sealing insert, splittable cable gland V-TEC TBZ The ideal aiding tool is the pair of spreading pliers which can be used to open the sealing insert. With this tool, inserting the individual cables is easy and quick. Place the cable into the spreading pliers, insert the spreading pliers into the sealing separation and then open them. Now the cable can easily be placed into the sealing. VBS 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 L Plastic cap nut cable glands with screw plug V-TEC VM2VS LGR V-TEC VM6VS LGR V-TEC VM20VS LGR V-TEC VM25VS LGR V-TEC VM32VS LGR Sealing range D Thread length Installation SW torque Nm Shipping box Thread M2 x, Light grey 500 M6 x, Light grey 500 M20 x, Light grey 600 M25 x, Light grey 300 M32 x, Light grey PA Polyamide /00 pc. The quickest and most convenient way of providing strain relief and tightness with cable glands on junction boxes and housings is with the tried-and-trusted V-TEC VM cable glands from OBO. With the integrated sealing lip and the special OBO lamella technology, protection class IP68 is achieved. Strain relief and tightness have been tested to DIN EN The connecting threads are metric and are therefore suitable for universal use. Once screwed in place, the fitting is there for ever, as the optimum thread adjustment with the right pitch ensures permanent resistance to shaking. Applications: From private housing with junction boxes up to industrial applications in the distributor cabinet. Temperature range: 20 C to +65 C. kg/00. 0,360 0,730 0,990,550 2, G D SW E L min. L max. L L2 M2 x M6 x M20 x M25 x M32 x L2 Dimensions D G SW L E 9

20 Cable/pipe fastening systems, metal Quick clip, aluminium VBS ALQ M6 ALQ M20 ALQ M25 ALQ M32 ALQ M40 ALQ M50 ALQ M63 Alu Aluminium Nominal size Shipping box kg/00. 0, , , , , , , /00 pc. OBO Quick clip, type ALQ M, for all metric ALU pipe systems, as well as light-duty and heavyduty insulation pipes. Suitable for mounting the OBO pipe system, material: aluminium. Pipe centring aids allow optimal attachment of the pipe and automatically turn the clip into the correct position. Slot for side alignment during mounting with wood screw or knock-in anchor. Recoended fastening spacing cm. E H Dimensions A h 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 B G A B E F H H F Woven strip Width Material per thickness roll m GB 525 GR PP Polypropylene kg/00. 8, Tear-resistant and UV-stable fabric table, universally application, e.g. to fix pipes and cables on the floor, before screed laying using OBO anchors or nails. 20

21 Cable/pipe fastening systems, metal Series clip LGR KS Clamping range D Bolt 8-36 M4 x 37.5 Light grey 800 Shipping box 00 kg/00. 0, PS Polystyrene /00 pc. Also suitable for rails of - 2 slot width; polystyrene clip element, impact resistant, halogen-free, light grey RAL 7035; metal parts: electrogalvanised steel. 4 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 VBS 2

22 Cable/pipe fastening systems, special Cable ties VBS x75 WS x00 WS x50 WS x200 WS x50 WS x200 WS x290 WS x365 WS x20 WS x60 WS x200 WS x300 WS x365 WS x430 WS x200 WS x300 WS x380 WS 565 8x450 WS 565 9x760 WS PA Polyamide Dim. B Dim. L Dim. t White White White White White White White White White White White White White White White White White White White kg/00. 0, , , , , , , , , , , , , , , , , , , /00 pc. Cable ties are used for quick, uncomplicated fixing or bundling of cables and pipes to cable support systems or other mounting structures. Cable tie, UV and weather-resistant x75 SWUV x00 SWUV x50 SWUV x200 SWUV x50 SWUV x200 SWUV x290 SWUV x365 SWUV x20 SWUV x60 SWUV x200 SWUV x300 SWUV x365 SWUV x430 SWUV x200 SWUV x300 SWUV x380 SWUV 565 8x450 SWUV 565 9x760 SWUV Dim. B Dim. L Dim. t Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black kg/00. 0, , , , , , , , , , , , , , , , , , , PA Polyamide /00 pc. Cable ties are used for quick, uncomplicated fixing or bundling of cables and pipes to cable support systems or other mounting structures. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 22

23 Pipe systems Pipe end cap, separable D2 29 TB M6 29 TB M20 29 TB M25 29 TB M32 29 TB M40 29 TB M50 29 TB M63 Dim. D Dim. D2 Dimension L sion L2 Dimen- Size M Light grey M Light grey M Light grey M Light grey M Light grey M Light grey M Light grey kg/ ,400 0,440 0,576 0,656 0,790 0,935, L2 D L VBS PE Polyethylene /00 pc. Separable pipe end cap to slot onto metric electrical installation pipes. The splittable pipe end cap can be used for correct repair purposes on existing installations. It is not necessary to disconnect the cables, allowing quick mounting. Pipe end cap, separable 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 D2 29 TB M6 SW 29 TB M20 SW 29 TB M25 SW 29 TB M32 SW 29 TB M40 SW 29 TB M50 SW 29 TB M63 SW Dim. D Dim. D2 Dimension L sion L2 Dimen- Size M Black M Black M Black M Black M Black M Black M Black kg/ ,400 0,440 0,576 0,656 0,790 0,935, L2 D L PE Polyethylene /00 pc. Separable pipe end cap to slot onto metric electrical installation pipes. The splittable pipe end cap can be used for correct repair purposes on existing installations. It is not necessary to disconnect the cables, allowing quick mounting. 23

24 F Support clamp systems Support clamp TKM Chock FS VBS TKM Chock FS TKM Chock 2 FS TKM Chock 3 FS Dim. L Dim. H Dim. E Dimension A Dim. B kg/00. 6,00 6,400 6,800 St Steel FS Strip-galvanised Support clamp for knocking in on the support with flange thicknesses of Suitable for parallel and inclined flanges. Maximum flange incline: 4% Support clamp TKM Chock V4A Dim. L Dim. H Dim. E Dimension A Dim. B TKM Chock 2 V4A V4A Stainless steel, grade 36 Ti 25 kg/00. 6,400 Support clamp for knocking in on the support with flange thicknesses of Suitable for parallel and inclined flanges. Maximum flange incline: 4% Screw-in support clamp Flange Clamping Breaking thickness range D load kn TKS St Steel ZL Zinc lamella With rotating clip to accept pipes and cables, lockable. 50 kg/00. 5, /00 pc. Support clamp SSP 6-2, M6, FT SSP 6-2 M6 FT Flange Dim. For Break Break thickness H threaded load F load F2 rod kn kn M kg/00. 23, St Steel FT Hot-dip galvanised /00 pc. M This type of support clamp is pushed onto the support and fixed to the girder or flat iron using a pressure trough and bolt (M8). The hexagonal bolt has a WAF of 0. In addition, there are two further M6 threads in the clip element, in order to fasten threaded rods, for example. G H G SSP 6-2 M6 FT Breaking load F kn Breaking load F2 kn OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 24

25 F F F Support clamp systems Support clamp SSP 6-2, M8, FT SSP 6-2 M8 FT Flange Dim. For Break thickness H threaded load F rod kn M Break load F2 kn 25 kg/00. 23, St Steel /00 pc. FT Hot-dip galvanised This type of support clamp is pushed onto the support and fixed to the girder or flat iron using a pressure trough and bolt (M8).The hexagonal bolt has a WAF of 0. In addition, there are two further M6 threads in the clip element, in order to fasten threaded rods, for example. M VBS G H G SSP 6-2 M8 FT Breaking load F kn Breaking load F2 kn.75.5 Support clamp SSP 6-2, M6, V2A SSP 6-2 M6 V2A Flange Dim. For Break thickness H threaded load F rod kn M Break load F2 kn 25 kg/00. 23, V2A Stainless steel, grade 304 /00 pc. This type of support clamp is pushed onto the support and fixed to the girder or flat iron using a pressure trough and bolt (M8). The hexagonal bolt has a WAF of 0. In addition, there are two further M6 threads in the clip element, in order to fasten threaded rods, for example. M G H G SSP 6-2 M6 V2A Breaking load F kn Breaking load F2 kn.75.5 Support clamp SSP 6-2, M8, V2A SSP 6-2 M8 V2A Flange Dim. For Break Break thickness H threaded load F load F2 rod kn kn M kg/00. 23, OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 V2A Stainless steel, grade 304 /00 pc. This type of support clamp is pushed onto the support and fixed to the girder or flat iron using a pressure trough and bolt (M8). The hexagonal bolt has a WAF of 0. In addition, there are two more M8 threads are introduced, for example to attach threaded rods. SSP 6-2 M8 V2A Breaking load F kn Breaking load F2 kn.75.5 G M8 48 G H

26 F F F Support clamp systems Support clamp SSP 6-2, M6, V4A SSP 6-2 M6 V4A Flange Dim. For Break thickness H threaded load F rod kn M Break load F2 kn 25 kg/00. 23, VBS M V4A Stainless steel, grade 36 L /00 pc. This type of support clamp is pushed onto the support and fixed to the girder or flat iron using a pressure trough and bolt (M8). The hexagonal bolt has a WAF of 0. In addition, there are two further M6 threads in the clip element, in order to fasten threaded rods, for example. G H G SSP 6-2 M6 V4A Breaking load F kn Breaking load F2 kn.75.5 Support clamp SSP 6-2, M8, V4A SSP 6-2 M8 V4A Flange Dim. For Break thickness H threaded load F rod kn M Break load F2 kn 25 kg/00. 23, M V4A Stainless steel, grade 36 L /00 pc. This type of support clamp is pushed onto the support and fixed to the girder or flat iron using a pressure trough and bolt (M8). The hexagonal bolt has a WAF of 0. In addition, there are two more M8 threads are introduced, for example to attach threaded rods. G H G SSP 6-2 M8 V4A Breaking load F kn Breaking load F2 kn.75.5 Support clamp SSP 20-40, M6, FT SSP M6 FT Flange Dim. For Break Break thickness H threaded load F load F2 rod kn kn M kg/00. 27, St Steel FT Hot-dip galvanised /00 pc. G M8 48 G H This type of support clamp is pushed onto the support and fixed to the girder or flat iron using a pressure trough and bolt (M8). The hexagonal bolt has a WAF of 0. In addition, there are two further M6 threads in the clip element, in order to fasten threaded rods, for example. SSP M6 FT Breaking load F kn Breaking load F2 kn OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 26

27 F F F Support clamp systems Support clamp SSP 20-40, M8, FT SSP M8 FT Flange Dim. For Break thickness H threaded load F rod kn M8.4.3 Break load F2 kn 25 kg/00. 27, St Steel /00 pc. FT Hot-dip galvanised This type of support clamp is pushed onto the support and fixed to the girder or flat iron using a pressure trough and bolt (M8). The hexagonal bolt has a WAF of 0. In addition, there are two more M8 threads are introduced, for example to attach threaded rods. M VBS G H G SSP M8 FT Breaking load F kn Breaking load F2 kn.4.3 Support clamp SSP 20-40, M6, V2A SSP M6 V2A Flange Dim. For Break thickness H threaded load F rod kn M6.4.3 Break load F2 kn 25 kg/00. 27, V2A Stainless steel, grade 304 /00 pc. This type of support clamp is pushed onto the support and fixed to the girder or flat iron using a pressure trough and bolt (M8). The hexagonal bolt has a WAF of 0. In addition, there are two further M6 threads in the clip element, in order to fasten threaded rods, for example. M G H G SSP M6 V2A Breaking load F kn Breaking load F2 kn.4.3 Support clamp SSP 20-40, M8, V2A SSP M8 V2A Flange Dim. For Break Break thickness H threaded load F load F2 rod kn kn M kg/00. 27, OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 V2A Stainless steel, grade 304 /00 pc. This type of support clamp is pushed onto the support and fixed to the girder or flat iron using a pressure trough and bolt (M8). The hexagonal bolt has a WAF of 0. In addition, there are two more M8 threads are introduced, for example to attach threaded rods. SSP M8 V2A Breaking load F kn Breaking load F2 kn.4.3 G M8 48 G H

28 F F Support clamp systems Support clamp SSP 20-40, M6, V4A SSP M6 V4A Flange Dim. For Break thickness H threaded load F rod kn M6.4.3 Break load F2 kn 25 kg/00. 27, VBS M V4A Stainless steel, grade 36 L /00 pc. This type of support clamp is pushed onto the support and fixed to the girder or flat iron using a pressure trough and bolt (M8). The hexagonal bolt has a WAF of 0. In addition, there are two further M6 threads in the clip element, in order to fasten threaded rods, for example. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 G H G SSP M6 V4A Breaking load F kn Breaking load F2 kn.4.3 Support clamp SSP 20-40, M8, V4A SSP M8 V4A Flange Dim. For Break thickness H threaded load F rod kn M8.4.3 Break load F2 kn 25 kg/00. 27, M V4A Stainless steel, grade 36 L /00 pc. This type of support clamp is pushed onto the support and fixed to the girder or flat iron using a pressure trough and bolt (M8). The hexagonal bolt has a WAF of 0. In addition, there are two more M8 threads are introduced, for example to attach threaded rods. G H G SSP M8 V4A Breaking load F kn Breaking load F2 kn

29 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 29

30 30 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206

31 TBS product innovations Surge protection, arrester, type +2 (office and housing) 33 Surge protection, arrester, type 2 36 Surge protection, arrester, type Surge protection, arrester, type 3 44 Surge protection, photovoltaics 46 Surge protection device for data and information technology 53 Equipotential bonding for Ex areas 56 Earthing systems 58 Interception unit and arrester systems 60 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 3

32 Surge protection energy technology, arrester, type (industry) TBS Surge protection device for energy technology, arrester, type (industry) 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 32

33 Surge protection, arrester, type +2 (office and housing) Combination arrester V50, -pole + NPE 280 V VG-V50-+NPE-280 Lightning current combination arrester, type +2 to DIN EN kg/00. 8, For lightning protection equipotential bonding to VDE (IEC 62305) Complete unit, pre-mounted and ready for connection in polycarbonate housing (IP66) Lightning current arresting capacity 2.5 ka (0/350) per pole and up to 50 ka (0/350) in total Application: Lightning protection equipotential bonding for buildings of Class III and IV. If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary! Dimensions 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 TBS VG-V50-+NPE-280 SPD to EN SPD to IEC SPD to UL 449 Nominal voltage AC (50 / 60 Hz) Maximum continuous voltage AC Nominal discharge current (8/20 µs) Maximum discharge current (8/20 μs) Lightning surge current (0/350 μs) Total discharge current (0/350) Arrester surge current (8/20 µs) [total] Protection level [L-N] Protection level ka Protection level 5 ka Max. mains-side overcurrent protection Short-circuit resistance for max. mains-side overcurrent protection Operating temperature range Protection rating Approvals Cable cross-section, flexible (fine-wire) Rigid cable cross-section (single-wire/multi-wire) Cable cross-section, flexible (fine-wire) Rigid cable cross-section (single-wire/multi-wire) U n U C I n / L-N I max I imp I total I total U p U res U res T u +2 class I+II V 280 V 30 ka 50 ka 2.5 ka 25 ka 50 ka.3 kv 0,7 kv 0,8 kv 60 A gl/gg 50 ka eff C IP66 UL, ÖVE.5-35 ².5-35 ² 6-2 AWG 6-2 AWG Connection options 33

34 Surge protection, arrester, type +2 (office and housing) Combination arrester V50, 3-pole + NPE 280 V VG-V50-3+NPE-280 Lightning current combination arrester, type +2 to DIN EN kg/00. 0, For lightning protection equipotential bonding to VDE (IEC 62305) Complete unit, pre-mounted and ready for connection in polycarbonate housing (IP66) Lightning current arresting capacity 2.5 ka (0/350) per pole and up to 50 ka (0/350) in total 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 TBS Dimensions Application: Lightning protection equipotential bonding for buildings of Class III and IV. If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary! Connection options VG-V50-3+NPE-280 SPD to EN SPD to IEC SPD to UL 449 Nominal voltage AC (50 / 60 Hz) Maximum continuous voltage AC Nominal discharge current (8/20 µs) Maximum discharge current (8/20 μs) Lightning surge current (0/350 μs) Total discharge current (0/350) Arrester surge current (8/20 µs) [total] Protection level [L-N] Protection level ka Protection level 5 ka Max. mains-side overcurrent protection Short-circuit resistance for max. mains-side overcurrent protection Operating temperature range Protection rating Approvals Cable cross-section, flexible (fine-wire) Rigid cable cross-section (single-wire/multi-wire) Cable cross-section, flexible (fine-wire) Rigid cable cross-section (single-wire/multi-wire) U n U C I n / L-N I max I imp I total I total U p U res U res T u +2 class I+II V 280 V 30 ka 50 ka 2.5 ka 50 ka 50 ka.3 kv 0,7 kv 0,8 kv 60 A gl/gg 50 ka eff C IP66 UL, ÖVE.5-35 ².5-35 ² 6-2 AWG 6-2 AWG 34

35 Surge protection energy technology, arrester, type 2 TBS 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 Surge protection Energy technology, type 2 arrester 35

36 Surge protection, arrester, type 2 System solution, surge arrester V20 in housing, -pole + NPE, 280 V VG-V20-+NPE-280 Surge arrester, type 2, according DIN EN For surge voltage protection equipotential bonding to VDE (IEC ) Complete unit, pre-mounted and ready for connection in polycarbonate housing (IP66) Arresting capacity to 40 ka (8/20) per pole through high-performance varistors TBS 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 Dimensions Application: Equipotential bonding in main and sub-distributors. If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary! Connection options VG-V20-+NPE-280 SPD to EN SPD to IEC SPD to UL 449 Nominal voltage AC (50 / 60 Hz) Maximum continuous voltage AC Nominal discharge current (8/20 µs) Maximum discharge current (8/20 μs) Arrester surge current (8/20 µs) [total] Protection level [L-N] Protection level ka Protection level 5 ka Max. mains-side overcurrent protection Short-circuit resistance for max. mains-side overcurrent protection Operating temperature range Protection rating Approvals Cable cross-section, flexible (fine-wire) Rigid cable cross-section (single-wire/multi-wire) Cable cross-section, flexible (fine-wire) Rigid cable cross-section (single-wire/multi-wire) U n U C I n / L-N I max I total U p U res U res T u 2 class II V 280 V 20 ka 40 ka 60 ka.3 kv 0,7 kv 0,9 kv 60 A gl/gg 50 ka eff C IP66 ÖVE, UL.5-35 ².5-35 ² 6-2 AWG 6-2 AWG 36

37 Surge protection, arrester, type 2 PV system solution in the housing VG-BC900S System solution, type +2, with MC4 connector for photovoltaic inverter with one/two MPP trackers Varistor arrester, connectable with cut-off unit in error-resistant Y circuit to VDE ( ) +2 combination arrester for lightning protection equipotential bonding to EN (VDE ) Low DC protection level: < 3.0 kv (Voc max = 900 V DC with V25-B+C/0-450PV) One PV string input (MC4 plug connector) at one MPP inverter input, up to 30 A DC per terminal Pre-mounted in polycarbonate housing (IP65), UV-resistant for use outside Dimensions 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 TBS For DC protection of the inverter of photovoltaic systems. If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary! VG-BC900S U max DC SPD to EN Lightning protection zone LPZ Impulse discharge current (0/350) Nominal discharge current (8/20) Maximum discharge current (8/20 μs) Voltage protection level Response time Temperature range Protection rating U c DC I imp I n I max U p t A ϑ 900 V ka 30 ka 50 ka < 3,0 kv < 25 ns C IP66 Connection options 37

38 Surge protection, arrester, type 2 PV system solution in the housing VG-BC900S System solution, type +2, with MC4 connector for photovoltaic inverter with one/two MPP trackers 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 TBS Dimensions Varistor arrester, connectable with cut-off unit in error-resistant Y circuit to VDE ( ) +2 combination arrester for lightning protection equipotential bonding to EN (VDE ) Low DC protection level: < 3.0 kv (Voc max = 900 V DC with V25-B+C/0-450PV) One PV string input (MC4 plug connector) at one MPP inverter input, up to 30 A DC per terminal Pre-mounted in polycarbonate housing (IP65), UV-resistant for use outside For DC protection of the inverter of photovoltaic systems. If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary! Connection options VG-BC900S U max DC SPD to EN Lightning protection zone LPZ Impulse discharge current (0/350) Nominal discharge current (8/20) Maximum discharge current (8/20 μs) Voltage protection level Response time Temperature range Protection rating U c DC I imp I n I max U p t A ϑ 900 V ka 30 ka 50 ka < 3,0 kv < 25 ns C IP66 38

39 Surge protection, arrester, type 2 PV system solution in the housing VG-BCPV 900KS System solution for photovoltaic fuses (unequipped) for photovoltaic inverters with MPP tracker Error-resistant Y circuit to VDE ( ) Low DC protection level: < 3.0 kv (Voc max = 900 V DC with V50-C/0-450PV) (+) poles protected via photovoltaic fuses 0x38 (unequipped), 900 V DC protected (-) pole via terminal up 6 ² switched in parallel in the housing, up to 30 A DC per terminal Pre-mounted in polycarbonate housing (IP66), UV-resistant for use outside, including cable gland kit For DC protection of the inverter in photovoltaic systems. If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary! Dimensions TBS 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 VG-BCPV 900KS U max DC SPD to EN Lightning protection zone LPZ Impulse discharge current (0/350) Nominal discharge current (8/20) Maximum discharge current (8/20 μs) Voltage protection level Response time Connection cross-section rigid Connection cross-section, flexible Temperature range Protection rating U c DC I imp I n I max U p t A ϑ 900 V ka 30 ka 60 ka < 3,0 kv < 25 ns ² ² C IP66 Connection options 39

40 Surge protection, arrester, type 2 System solution, surge arrester V20 in housing, 3-pole + NPE, 280 V VG-V20-3+NPE-280 Surge arrester, type 2, according DIN EN For surge voltage protection equipotential bonding to VDE (IEC ) Complete unit, pre-mounted and ready for connection in polycarbonate housing (IP66) Arresting capacity to 40 ka (8/20) per pole through high-performance varistors TBS 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 Dimensions Application: Equipotential bonding in main and sub-distributors. If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary! Connection options VG-V20-3+NPE-280 SPD to EN SPD to IEC SPD to UL 449 Nominal voltage AC (50 / 60 Hz) Maximum continuous voltage AC Nominal discharge current (8/20 µs) Maximum discharge current (8/20 μs) Arrester surge current (8/20 µs) [total] Protection level [L-N] Protection level ka Protection level 5 ka Max. mains-side overcurrent protection Short-circuit resistance for max. mains-side overcurrent protection Operating temperature range Protection rating Approvals Cable cross-section, flexible (fine-wire) Rigid cable cross-section (single-wire/multi-wire) Cable cross-section, flexible (fine-wire) Rigid cable cross-section (single-wire/multi-wire) U n U C I n / L-N I max I total U p U res U res T u 2 class II V 280 V 20 ka 40 ka 60 ka.3 kv 0,7 kv 0,9 kv 60 A gl/gg 50 ka eff C IP66 ÖVE, UL.5-35 ².5-35 ² 6-2 AWG 6-2 AWG 40

41 Surge protection energy technology, arrester, type 2+3 TBS 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 Surge protection Energy technology, type 2+3 arrester 4

42 Surge protection, arrester, type 2+3 Surge protection for LED systems ÜSM-LED Version + NPE 25 kg/00. 7, Surge protection module type 2+3 to DIN EN for 230/400 V power grids. Appropriate for the protection of LED lighting and the LED driver. TBS Dimensions With visual function display Small size for the installation in the mast connection box IP65 and with 25 cm connection cable +NPE protective circuit with a maximum discharge capacity of 20 ka Surge limitation under,300 V or,000 5 ka Available with or without cut-off function of the lamp in case of malfunction Application: Universally deployable in all lighting systems Connection options 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 ÜSM-LED Nominal voltage SPD to EN SPD to IEC Lightning protection zone LPZ Nominal discharge current (8/20) Arrester surge current (8/20) [total] Maximum discharge current (8/20 μs) Voltage protection level Response time Maximum back-up fuse Temperature range Division unit TE (7.5 ) Protection rating Connecting cable length U N I n I Total 8/20 I max U p t A ϑ 230 V 2+3 class II+III ka 20 ka 20 ka,3 kv < 25 ns 6 A C Other IP m 42

43 Surge protection energy technology, arrester, type 3 TBS 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 Surge protection Energy technology, type 3 arrester 43

44 Surge protection, arrester, type 3 Fine power protection, protective contact sockets ÜSM-ST-230-P+PE Signalling on device Version Audible Acoustic function display kg/00., Surge protection / fine power protection, type 3, to EN for protective contact sockets. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 TBS Dimensions Thermal cut-off unit with acoustic defect signalling Y protection circuit for increased safety Mounting through snapping onto the support ring of the socket Labelling of the socket with supplied sign Application: For retrofitting on standard Schuko sockets Connection options ÜSM-ST-230-P+PE Nominal voltage Max. continuous operating voltage SPD to EN SPD to IEC Lightning protection zone LPZ Nominal discharge current (8/20) Maximum discharge current (8/20 μs) Protection level (L-N) Protection level (N-PE) Maximum back-up fuse Response time Temperature range U N U C I n I max t A ϑ 230 V 255 V 3 class III ka 5 ka <,5 kv <,5 kv 6 A 25 ns C 44

45 Photovoltaic systems TBS 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 Photovoltaic systems Arrester type +2, type 2 45

46 Surge protection, photovoltaics PV system solution, type 2, for inverter with 2 MPP trackers, 900 V DC VG-BCPV 900KS System solution for photovoltaic fuses (unequipped) for photovoltaic inverters with 2 MPP tracker 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 TBS Dimensions Error-resistant Y circuit to VDE ( ) Low DC protection level: < 3.0 kv (Voc max = 900 V DC with V50-C/0-450PV) (+) poles protected via photovoltaic fuses 0x38 (unequipped), 900 V DC protected (-) pole via terminal up 6 ² switched in parallel in the housing, up to 30 A DC per terminal Pre-mounted in polycarbonate housing (IP66), UV-resistant for use outside, including cable gland kit For DC protection of the inverter in photovoltaic systems. If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary! Connection options VG-BCPV 900KS U max DC SPD to EN Lightning protection zone LPZ Impulse discharge current (0/350) Nominal discharge current (8/20) Maximum discharge current (8/20 μs) Voltage protection level Response time Connection cross-section rigid Connection cross-section, flexible Temperature range Protection rating U c DC I imp I n I max U p t A ϑ 900 V ka 30 ka 60 ka < 3,0 kv < 25 ns ² ² C IP66 46

47 Surge protection, photovoltaics PV system solution, type +2, for inverter with MPP tracker, 900 V DC VG-V25-BC3-PH900 System solution for photovoltaic inverter with MPP tracker Varistor arrester, connectable with cut-off unit in error-resistant Y circuit to VDE ( ) Low DC protection level: < 2.6 kv (Voc max = 600 V DC with V50-B+C/0-300PV / V20-C/0-300PV) Low DC protection level: < 3.0 kv (Voc max = 900 V DC with V25-B+C/0-450PV) Low DC protection level: < 4.0 kv (Voc max = 000 V DC with V20-C/0-500PV) For each protection device, there are 0 terminals up to 6 ² pre-mounted in the housing, up to 30 A DC per terminal Pre-mounted in polycarbonate housing (IP65), UV-resistant for use outside, including cable gland kit Dimensions TBS For DC protection of the inverter in photovoltaic systems. If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary! 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 VG-V25-BC3-PH900 U max DC SPD to EN Lightning protection zone LPZ Impulse discharge current (0/350) Nominal discharge current (8/20) Maximum discharge current (8/20 μs) Voltage protection level Response time Connection cross-section rigid Connection cross-section, flexible Temperature range Protection rating U c DC I imp I n I max U p t A ϑ 900 V ka 30 ka 50 ka < 3,0 kv < 25 ns.5-6 ².5-0 ² C IP66 Connection options 47

48 Surge protection, photovoltaics PV system solution, type +2, for inverter with MPP tracker,,000 V DC VG-V20-C3-PH000 System solution for photovoltaic inverter with separate MPP tracker OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 TBS Dimensions Varistor arrester, connectable with cut-off unit in error-resistant Y circuit to VDE ( ) Low DC protection level: < 4.0 kv (Uoc max =,000 V DC with V20-C/0-500PV) Low DC protection level: < 3.0 kv (Uoc max = 900 V DC with V25-B+C/0-450PV) Per protection device, there are 8 terminals up to 6 ² pre-mounted in the housing, up to 30 A DC per terminal Pre-mounted in polycarbonate housing (IP65), UV-resistant for the use outside, including cable gland kit For DC protection of the inverter in photovoltaic systems. If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary! Connection options VG-V20-C3-PH000 U max DC SPD to EN Lightning protection zone LPZ Impulse discharge current (0/350) Nominal discharge current (8/20) Maximum discharge current (8/20 μs) Voltage protection level Response time Connection cross-section rigid Connection cross-section, flexible Temperature range Protection rating U c DC I imp I n I max U p t A ϑ 000 V 2 2 ka 20 ka 40 ka < 4,0 kv < 25 ns.5-6 ².5-0 ² C IP66 48

49 Surge protection, photovoltaics PV system solution in the housing VG-BC900S System solution, type +2, with MC4 connector for photovoltaic inverter with one/two MPP trackers Varistor arrester, connectable with cut-off unit in error-resistant Y circuit to VDE ( ) +2 combination arrester for lightning protection equipotential bonding to EN (VDE ) Low DC protection level: < 3.0 kv (Voc max = 900 V DC with V25-B+C/0-450PV) One PV string input (MC4 plug connector) at one MPP inverter input, up to 30 A DC per terminal Pre-mounted in polycarbonate housing (IP65), UV-resistant for use outside Dimensions 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 TBS For DC protection of the inverter of photovoltaic systems. If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary! VG-BC900S U max DC SPD to EN Lightning protection zone LPZ Impulse discharge current (0/350) Nominal discharge current (8/20) Maximum discharge current (8/20 μs) Voltage protection level Response time Temperature range Protection rating U c DC I imp I n I max U p t A ϑ 900 V ka 30 ka 50 ka < 3,0 kv < 25 ns C IP66 Connection options 49

50 Surge protection, photovoltaics PV system solution in the housing VG-BC900S System solution, type +2, with MC4 connector for photovoltaic inverter with one/two MPP trackers 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 TBS Dimensions Varistor arrester, connectable with cut-off unit in error-resistant Y circuit to VDE ( ) +2 combination arrester for lightning protection equipotential bonding to EN (VDE ) Low DC protection level: < 3.0 kv (Voc max = 900 V DC with V25-B+C/0-450PV) One PV string input (MC4 plug connector) at one MPP inverter input, up to 30 A DC per terminal Pre-mounted in polycarbonate housing (IP65), UV-resistant for use outside For DC protection of the inverter of photovoltaic systems. If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary! Connection options VG-BC900S U max DC SPD to EN Lightning protection zone LPZ Impulse discharge current (0/350) Nominal discharge current (8/20) Maximum discharge current (8/20 μs) Voltage protection level Response time Temperature range Protection rating U c DC I imp I n I max U p t A ϑ 900 V ka 30 ka 50 ka < 3,0 kv < 25 ns C IP66 50

51 Surge protection, photovoltaics PV system solution in the housing VG-BCPV 900KS System solution for photovoltaic fuses (unequipped) for photovoltaic inverters with MPP tracker Error-resistant Y circuit to VDE ( ) Low DC protection level: < 3.0 kv (Voc max = 900 V DC with V50-C/0-450PV) (+) poles protected via photovoltaic fuses 0x38 (unequipped), 900 V DC protected (-) pole via terminal up 6 ² switched in parallel in the housing, up to 30 A DC per terminal Pre-mounted in polycarbonate housing (IP66), UV-resistant for use outside, including cable gland kit For DC protection of the inverter in photovoltaic systems. If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary! Dimensions TBS 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 VG-BCPV 900KS U max DC SPD to EN Lightning protection zone LPZ Impulse discharge current (0/350) Nominal discharge current (8/20) Maximum discharge current (8/20 μs) Voltage protection level Response time Connection cross-section rigid Connection cross-section, flexible Temperature range Protection rating U c DC I imp I n I max U p t A ϑ 900 V ka 30 ka 60 ka < 3,0 kv < 25 ns ² ² C IP66 Connection options 5

52 Surge protection, data and information technology TBS Surge protection device for data and information technology 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 52

53 Surge protection device for data and information technology Combination protection device for VDSL systems TD-2D-V Plastic Data cable protection device for telecounications equipment Low protection level at a high current load "Push-in" clamps for quick installation Bandwidth-optimised for secure transmission up to 225 MHz Surface mounting Application: Ideal for all DSL systems, IP connections, ISDN or analogue telecounications Dimensions TBS 90 53,7 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/ TD-2D-V Maximum continuous voltage AC Maximum continuous voltage DC Category Lightning protection zone LPZ Number of poles Rated current Capacity (wire-wire) Capacity (wire-earth) Series resistance per wire Impulse current resistance wire-wire Impulse current resistance wire-earth Impulse discharge current (0/350) Total arrester surge current (8/20) Total arrester surge current (0/350) Protection level wire-wire Protection level wire-earth Protection level shield-earth (S-PE) Frequency range Insertion loss Temperature range Installation type Connection system Protection rating Shielding connection available Connection cross-section, flexible Connection cross-section, multi-wire Connection cross-section rigid Testing standard U C U C I L I imp S 2 ϑ 25 V 80 V +2+3 / D+C2+C A <0 pf <20 pf 2,2 Ω ± 5 % C2: 5 kv / 7.5 ka (8/20 µs) C2: 5 kv / 7,5 ka (8/20µs) 2.5 ka 22,5 ka D: 7,5 ka <350 V <600 V V MHz 3 db C Surface-mounted Terminal IP54 Yes ² ² ² IEC Connection options 53

54 Surge protection device for data and information technology Coaxial protection device for N connection up to 6 GHz: Male/female TBS Dimensions DS-N-6 M/W Coaxial data cable protection devices for transmission and reception technology With N-Connector, male/female High impulse current load capacity: 2.5 ka (0/350) Simple mounting (adapter), m = connector, w = socket Low protection level at high current loads Optimum transmission behaviour: - Low reflection behaviour - Bandwidth-optimised for secure transmission up to 6 GHz Available in 50 Ω technology Application: For example: SAT-TV C band, WiMAX, WLAN applications, DVB-T ,80 49 Connection options DS-N-6 M/W Maximum continuous voltage AC Maximum continuous voltage DC Category Lightning protection zone LPZ Number of poles Rated current Wave resistance Impulse current resistance wire-wire Impulse current resistance wire-earth Impulse discharge current (0/350) Protection level Frequency range Insertion loss Return loss Temperature range Installation type Connection system Protection rating Shielding connection available Shield connection Testing standard U C U C I L Z L I imp S 2 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 S ϑ 50 V 70 V +2 / D+C A 50 Ω C2: 0 kv / 5 ka (8/20 µs) C2: 0 kv / 5 ka (8/20µs) 2.5 ka <750 V 0-6 GHz 0, db 22 db C Connector/cable adapter N IP65/67 Yes Direct IEC

55 Equipotential bonding for Ex areas TBS 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 Equipotential bonding, Ex protection 55

56 Equipotential bonding for Ex areas Equipotential busbar for Ex zone /2, 2/22 EX PAS 5 EX PAS 0 Number of Width Height connections V2A Stainless steel, grade 304 kg/00. 52, , For ignition spark-free protection/functional equipotential bonding to DIN VDE /-540 as well as ignition spark-free lightning protection equipotential bonding to DIN VDE (IEC 62305) in systems to VDE 065- (IEC/ EN ) 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 TBS Dimensions Use in potentially explosive areas, Ex zone and 2/ 2 and 22 Tested according to explosion group IIC Lightning current carrying capacity class H (00 ka) to VDE (IEC/EN 6256-) UV-stabilised and halogen-free insulation feet With spring washer for locking screws against self-loosening to VDE Supplementary sheet 2 Suitable for indoor and outdoor applications 56

57 Earthing systems TBS 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 Earthing systems 57

58 Earthing systems Protective cap for connection lugs, reflective ProtectionBall PE Polyethylene Fit RD 8-0/ FL 25/ 30/ 40 For snapping onto round cables or flat conductors Noticeable, reflective label For accident protection during the construction phase 25 kg/00. 2, /00 pc. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 TBS Dimensions 58

59 Interception unit and arrester systems 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 TBS Air termination and down conductor systems 59

60 Interception unit and arrester systems Lightning current meter LSC I+II Plastic kg/00. 36, The LSC I+II lightning current meter measures and permanently saves pulse currents, together with the date and time. This ensures constant monitoring in order to notice if any lightning has struck the lightning protection system. Should this be the case, then the lightning protection system must be maintained according to VDE (IEC 62305). TBS 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 Dimensions Saving and display of time and date Usable both inside and outside due to its protection class of IP65 Cable clip for round conductor or flat conductor Direct mounting on the arrester or the PE cable of the surge protection device Long lifespan of the internal lithium batteries LCD display Internal battery 60

61 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 6

62 62 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206

63 KTS product innovations Cable ladder, welded 66 Multifunctional connector 67 Expansion connector 67 Cable tray systems, walkable 74 Cable support trough 8 Fastening clip 83 Base plate for wide span systems 84 Angle connector for wide span systems 84 Straight connector for cable trays 85 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 63

64 Stable welding - 00 per cent supportive The highest level of stability, combined with the optimum space for vertical and horizontal cable assignment - that was what we strived for when developing the new generation of welded cable ladders. Here is the result. Highly resistant The rungs are welded to the lower flange. The flush connection is highly resistant and can also withstand the greatest loads. The flush connection of the rung with the lower flange guarantees optimum force transmission. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 KTS 64

65 Practical covers For horizontal installation, a cover on top offers protection against dust and dirt. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 KTS Volume An additional benefit of welding to the lower flange is provided by the position of the rung. Thanks to the rung beneath, the ladder offers additional installation space for cables. Tested Stability and reliable corrosion protection - also at the welding points: Both of these were checked in comprehensive testing in our own BET Test Centre. The ladders have passed both salt spray tests and load testing. 65

66 Cable ladder systems, welded Cable ladder LCIS KTS Dimensions LCIS FS LCIS FS LCIS FS LCIS FS LCIS FS LCIS FT LCIS FT LCIS FT LCIS FT LCIS FT LCIS FS LCIS FS LCIS FS LCIS FS LCIS FS LCIS FT LCIS FT LCIS FT LCIS FT LCIS FT Width Rail thickness St Steel FS Strip-galvanised FT Hot-dip galvanised m Cable ladder with 60 side height with welded C30 profile rungs which are open in an upwards direction. Rolled side rail for reinforcement and as edge protection. Fastening to the bracket takes place using clamps, type LKS 40. The slot dimension of the frame is 6.5 and the appropriate clamp clip is type Magnetic shield insulation without cover 0 db, with cover 5 db kg/00 m 267, , , , , , , , , , ,70 288,840 30, , , ,70 306,70 329,70 352, , /m 60 B 9 x 28 6, L 6, Load Load diagram LCIS 60 Permitted cable tray/ladder load in kn/m without man load Support width in m Rail bend in at permitted kn/m Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 66

67 Cable ladder systems, welded Multifunctional connector LMFV 620 FS LMFV 630 FS LMFV 640 FS LMFV 650 FS LMFV 660 FS LMFV 620 FT LMFV 630 FT LMFV 640 FT LMFV 650 FT LMFV 660 FT Dim. B kg/00. 23,200 29,700 36,200 42,800 49, St Steel FS Strip-galvanised FT Hot-dip galvanised Multifunction connector for joining cable ladders with a side height of 60. Syetric and asyetric reductions, bends and add-on tees can be created. 30,600 37,500 44,400 5,300 58,200 Dimensions 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 KTS B 604 Side height LDVG 60 FT 60 St Steel FT Hot-dip galvanised 2 Expansion connector for compensation of linear thermal expansion. kg/00. 6,700 Expansion connector Dimensions 67

68 Cable ladder systems, welded Cable ladder LCIS Dimensions LCIS A2 LCIS A2 LCIS A2 LCIS A2 LCIS A2 LCIS A4 LCIS A4 LCIS A4 LCIS A4 LCIS A4 Width Rail thickness m V2A Stainless steel, A2 V4A Stainless steel, A4 /m Cable ladder with 60 side height with welded C30 profile rungs which are open in an upwards direction. Rolled side rail for reinforcement and as edge protection. Fastening to the bracket takes place using clamps, type LKS 40. The slot dimension of the frame is 6.5 and the appropriate clamp clip is type Magnetic shield insulation without cover 0 db, with cover 5 db kg/00 m 267, , , , , , ,840 30, , , OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 KTS 60 B 9 x 28 6, L 6, Load Load diagram LCIS 60 Permitted cable tray/ladder load in kn/m without man load Support width in m Rail bend in at permitted kn/m Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width 68

69 Cable ladder systems, welded Cable ladder LCIS LCIS 20 6 FT LCIS 30 6 FT LCIS 40 6 FT LCIS 50 6 FT LCIS 60 6 FT Width Rail thickness m kg/00 m 399, , , ,670 49, St Steel /m FT Hot-dip galvanised Cable ladder with 0 side height with welded C30 profile rungs which are open in an upwards direction. Rolled side rail for reinforcement and as edge protection. Fastening to the bracket takes place using clamps, type LKS 40. The slot dimension of the frame is 6.5 and the appropriate clamp clip is type Magnetic shield insulation without cover 0 db, with cover 5 db. Dimensions L 9 x 28 KTS Ø 9 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 0 B 6, ,5 30 Load diagram, cable ladder, type LCIS 0 Permitted cable tray/ladder load in kn/m without man load Support width in m Rail bend in at permitted kn/m Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width Load 69

70 Cable ladder systems, welded Cable ladder SLCS Dimensions SLCS 20 3 FT SLCS 30 3 FT SLCS 40 3 FT SLCS 45 3 FT SLCS 50 3 FT SLCS 60 3 FT SLCS 75 3 FT SLCS 80 3 FT SLCS 90 3 FT SLCS 00 3 FT SLCS 20 3 FT St Steel FT Hot-dip galvanised Width Rail thickness m kg/00 m 529, , , , , , , , , , , Cable ladder with 0 side height with welded C30 profile rungs which are open in an upwards direction. Rolled side rail for reinforcement and as edge protection. Fastening to the bracket takes place using clamps, type LKS 40. The slot dimension of the frame is 6.5 and the appropriate clamp clip is type Magnetic shield insulation without cover 0 db, with cover 5 db. /m 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 0 KTS B 9 x 28 L 6, Load Load diagram, cable ladder, type SLCS 0 Permitted cable tray/ladder load in kn/m without man load Support width in m Rail bend in at permitted kn/m Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width 70

71 Cable ladder systems, welded Multifunctional connector LMFV 20 FS LMFV 30 FS LMFV 40 FS LMFV 50 FS LMFV 60 FS LMFV 20 FT LMFV 30 FT LMFV 40 FT LMFV 45 FT LMFV 50 FT LMFV 60 FT Dim. B kg/ ,00 24,600 22,00 227, , St Steel FS Strip-galvanised FT Hot-dip galvanised Multifunction connector for joining cable ladders with a side height of 0. Syetric and asyetric reductions, bends and add-on tees can be created. 22, , ,00 238,500 24, ,800 Dimensions 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 KTS B 680 Side height LDVG 60 FT 60 St Steel FT Hot-dip galvanised 2 Expansion connector for compensation of linear thermal expansion. kg/00. 6,700 Expansion connector

72 OBO's walkable cable tray systems offer users safe access to machines and systems. All the system components can accept large loads on account of their construction. If all the mounting specifications are complied with, we can guarantee a traffic load of up to 9,000 N, depending on the installation type. 4 or 6 KTS Material stability The Z separating retainers are also 2 thick. With a tray width of up to 300, one separating retainer is sufficient, although two or three separating retainers should be used for widths of up to 600. Additional mounting space The support bracket allows the mounting of clamp clips to guide additional media under the trays. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 72

73 High traffic load The material thickness of the cable trays is a continuous 2. The covers have an overall material thickness of 4 or 6. 2 Accident prevention An optional protection plate prevents dirt deposits beneath the trays and also helps to prevent accidents. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 KTS 73

74 Cable tray systems, walkable, side height 00 Cable tray BKRS, side height 00 BKRS 00 FS BKRS 020 FS BKRS 030 FS BKRS 040 FS BKRS 050 FS BKRS 060 FS St Steel FS Strip-galvanised The cable tray has connector perforations on both sides. Straight connectors should be ordered separately and in the appropriate quantity. Heavy-duty, walkable cable tray system BKRS with base perforation, in 00 side height. Magnetic shield insulation without cover 20 db, with cover 50 db. /m Dimensions B KTS 7 x 32 L x300 (=2700) H Installation Floor mounting Support spacing in m Appr. load in N BKRS BKRS BKRS BKRS BKRS BKRS Testing based on DIN EN Mounting on support bracket Support spacing in m Appr. load in kn/m BKRS BKRS BKRS BKRS BKRS BKRS Support element, type STE BKS FS from 400 width Straight and angle connector RLVL 00 FS Mounting on Z profile Support spacing in m Appr. load in kn/m BKRS BKRS BKRS BKRS BKRS BKRS Side height Width 00 0 kg/00. 23,200 St Steel FS Strip-galvanised Including appropriate fastening material. Straight and angle connector for cable trays and fittings with a side height of OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 74

75 Cable tray systems, walkable, side height 00 Separating retainer, Z shape, side height 00 TSG00Z BKRS FS Side height kg/00 m 28, St Steel /m FS Strip-galvanised Barrier strip for the BKRS walkable cable tray system. Attachment with truss-head screws M 6 x 2 in the base perforation. H OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 L 7 x 30 Reducer / stop-end RWEB 00 FS RWEB 020 FS RWEB 030 FS RWEB 040 FS RWEB 050 FS RWEB 060 FS Side height Width kg/00. 3,600 22,00 30,600 39,00 47,600 56, ,5 7 x 4 B B St Steel FS Strip-galvanised Including appropriate fastening material. Reducer/stop-end for cable trays with side height 00. KTS Truss-head bolt with flange nut FRSB 6X2 G Dimension M 6 x 2 St Steel G Electrogalvanised Truss-head bolt with square neck including flange nut. 00 kg/00. 0, /00 pc. 75

76 Cable tray systems, walkable, side height 0 Cable tray BKRS, side height 0 BKRS 0 FS BKRS 20 FS BKRS 30 FS BKRS 40 FS BKRS 50 FS BKRS 60 FS St Steel FS Strip-galvanised The cable tray has connector perforations on both sides. Straight connectors should be ordered separately and in the appropriate quantity. Heavy-duty, walkable cable tray system BKRS with base perforation, in 0 side height. Magnetic shield insulation without cover 20 db, with cover 50 db. /m Dimensions B KTS 7 x 32 L x300 (=2700) H Installation Floor mounting Support spacing in m Appr. load in N BKRS BKRS BKRS BKRS BKRS BKRS Testing based on DIN EN Mounting on support bracket Support spacing in m Appr. load in kn/m BKRS BKRS BKRS BKRS BKRS BKRS Support element, type STE BKS FS from 400 width Straight and angle connector RLVL 0 FS Mounting on Z profile Support spacing in m Appr. load in kn/m BKRS BKRS BKRS BKRS BKRS BKRS Side height Width 0 0 kg/00. 27,000 St Steel FS Strip-galvanised Including appropriate fastening material. Straight and angle connector for cable trays and fittings with a side height of OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 76

77 Cable tray systems, walkable, side height 0 Separating retainer, Z shape, side height 0 TSG0Z BKRS FS Dim. Dim. L H m 3 kg/00 m 240, St Steel /m FS Strip-galvanised Barrier strip for the BKRS walkable cable tray system. Attachment with truss-head screws M 6 x 2 in the base perforation. H L x 30 Reducer / stop-end RWEB 0 FS RWEB 20 FS RWEB 30 FS RWEB 40 FS RWEB 50 FS RWEB 60 FS Side height Width kg/00. 6,400 29,000 40,700 52,900 64,800 7, St Steel FS Strip-galvanised From a width of 50, a perforated underbelt is available. Including appropriate fastening material. Reducer/stop-end for cable trays with side height x 4 KTS 40 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 B B x 32 Truss-head bolt with flange nut Dimension FRSB 6X2 G M 6 x 2 St Steel G Electrogalvanised Truss-head bolt with square neck including flange nut. 00 kg/00. 0, /00 pc. 77

78 Accessories 00, 0 Cover with corrugated sheet and turn buckle, turn buckle spacing 500 L 5x500 (=2500) DF BKR0 FS AL DF BKR20 FS AL DF BKR30 FS AL DF BKR40 FS AL DF BKR50 FS AL DF BKR60 FS AL Dim. B Dim. L Plate thickness m kg/00 m 272, , , ,670.97, , Alu/St Aluminium/Steel /m Cable tray cover for the walkable cable BKRS cable tray system. The basic cover is strip galvanised in a material thickness of 2 with additional aluminium chequer riveted on in a thickness of 4, sturdy and non-slip. Turn buckle fastening with a turn buckle distance of 500. When using covers outdoors, additional measures against the influence of wind must be taken. Cover clamps or turn buckles on their own are not sufficient securing elements against wind loads. B KTS Cover with corrugated sheet and turn buckle, turn buckle spacing,000 Dim. Dim. Plate B L thickness m kg/00 m DF BKR0 0 FSAL , DF BKR20 0 FSAL , DF BKR30 0 FSAL , DF BKR40 0 FSAL , DF BKR50 0 FSAL , DF BKR60 0 FSAL , Alu/St Aluminium/Steel /m Cable tray cover for the walkable cable BKRS cable tray system. The basic cover is strip galvanised in a material thickness of 2 with additional aluminium chequer riveted on in a thickness of 4, sturdy and non-slip. Turn buckle fastening with a turn buckle distance of 000. When using covers outdoors, additional measures against the influence of wind must be taken. Cover clamps or turn buckles on their own are not sufficient securing elements against wind loads OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 L B 78

79 Accessories 00, 0 Turn buckle DRL 3 FT 20 St Steel FT Hot-dip galvanised Single-sided turn buckle. Use for cover widths of Turn buckle for additional installation or installation at a later date. kg/00., Dust protection element SSE BKR 00 FS SSE BKR 200 FS SSE BKR 300 FS SSE BKR 400 FS SSE BKR 500 FS SSE BKR 600 FS Dim. B kg/00.,630 3,250 4,870 6,490 8,20 9, B St Steel FS Strip-galvanised Dust protection element for the insertion between aluminium chequer plate and basic cover in BKRS walkable cable tray systems providing protection against dust, chips, etc. KTS Cover support, side height 0 DST0 BKRS FS St Steel FS Strip-galvanised 0 kg/00. 0, Cover support for the walkable BKRS cable tray system, for additional support of covers and fitting covers at a side height of Support bracket STA BKS0 FT STA BKS20 FT STA BKS30 FT STA BKS40 FT STA BKS50 FT STA BKS60 FT St Steel FT Hot-dip galvanised Support bracket for holding up the BKRS cable tray system from the floor. b B b OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 SB BKS FS St Steel FS Strip-galvanised /m Collision guard, to be attached at the side as a collision guard for the walkable BKRS cable tray system. The side height is 08. Protective panel

80 Accessories 00, 0 Support profile, side height 00 0 L x 20 7 x 5 STP Z 00 FS STP Z 020 FS STP Z 030 FS STP Z 040 FS STP Z 050 FS STP Z 060 FS STP Z 0300 FS Dim. L Plate thickness 3 kg/00. 22,500 44,800 67,200 89,500,800 34, , St Steel FS Strip-galvanised /m Support profile for holding up the BKRS cable tray system from the floor. The Z profile should be installed alternately with the stand-off. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 l k Anti-slip strip KTS ARS BKR GUM Rubber /m Self-adhesive, anti-slip strip to stick onto the Z barrier strip in walkable cable trays, for securing laid-on but not yet attached covers. Truss-head bolt Dimension FRSB 6X2 G M 6 x 2 St Steel G Electrogalvanised Truss-head bolt with square neck including flange nut. 00 kg/00. 0, /00 pc. Drilling screw dk BS BKS KP St Steel G Electrogalvanised dp d Drilling screw to DIN /00 pc. 80

81 Cable support trough system KTW 00 FT Cable support trough, single, for individual routing St Steel FT Hot-dip galvanised According to DIN VDE , a maximal support span of 0.8 m should not be exceeded. Cable support brackets for quick and easy routing of cables in areas where coon cable support systems cannot be installed due to lack of space. The cable support brackets possess a large load-bearing surface as well as rounded outer edges to protect the cables. Dimensions 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 KTS 8

82 Cable support trough system Cable support troughs Dimensions KTW 00 FT St Steel FT Hot-dip galvanised KTW 00 2 FT KTW 00 3 FT KTW 00 4 FT KTW 00 5 FT KTW 00 6 FT KTW 00 7 FT KTW 00 8 FT KTW 00 9 FT KTW 00 0 FT According to DIN VDE , a maximal support span of 0.8 m should not be exceeded. Cable support brackets for quick and easy routing of cables in areas where coon cable support systems cannot be installed due to lack of space. The cable support brackets possess a large load-bearing surface as well as rounded outer edges to protect the cables. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 KTS Load Load Levels Total load Number of anchors KTW 00 FT 0.5 kn KTW 00 2 FT 2.0 kn KTW 00 3 FT 3.5 kn KTW 00 4 FT kn 2 KTW 00 5 FT kn 2 KTW 00 6 FT kn 2 KTW 00 7 FT kn 3 KTW 00 8 FT kn 3 KTW 00 9 FT kn 3 KTW 00 0 FT kn 4 The specified values are based on concrete of resistance grade C25/30. Fastening anchor type: BZ Comply with the installation conditions of the DIBt approval (anchors). 82

83 Mesh cable tray systems BC GR 6.0 VA 20 kg/00.,760 V2A Stainless steel, grade 30 Hold-down clip for the screwless mounting of mesh cable trays onto MS profile rails Hold-down clip Dimensions 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 KTS b

84 Wide span systems Base plate for wide span systems WFP 0 FT Side height 0 St Steel FT Hot-dip galvanised kg/ , Including appropriate bolts, washers and nuts. WFP base plate for accepting wide span systems, for example for vertical routing of wide span cable trays. Dimensions 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 KTS Angle connector WRWVV 0 FS Side height 0 2 kg/00. 60, St Steel FS Strip-galvanised Including appropriate bolts, washers and nuts. Angle connector WRWVV for the connection of vertical and horizontal wide span systems. Dimensions 84

85 Cable tray systems RLVKV 60 FS Side height 50 0 St Steel FS Strip-galvanised The screw fastening ensures the continuity of the equipotential bonding. The vertical straight connector for the straight connection of cable trays and fittings with a side height of 60. Rising and falling mitre connections up to an angle of 60 can also be implemented with this connector. Straight connector, vertical kg/00. 4, OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 KTS 85

86 86 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206

87 BSS product innovations Pipe shells PYROCOMB Intube 89 Sealing compound system PYROLIQ 9 PYROPLUG foam series 94 Fire protection duct PYROLINE 97 Injection tie 04 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 87

88 System overview, PYROCOMB Intube pipe shell BSS PYROCOMB Intube pipe shell 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 88

89 Pipe shell PYROCOMB Intube CTS-HP200 For opening Ø Diameter PYROCOMB Intube half shell kg/00. 20, PVC Polyvinylchloride Internally coated half-shell, the inner space of which can be fully assigned with cables and electrical installation pipes. Approved in Europe with ETA-3/0904. Fire resistance classes to EI20. Closing with foam plug included in the delivery. The surface seal is done with ASX coating. The system is particularly suitable for underfloor areas. Details can be found in the mounting instructions/approval. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 BSS 89

90 Sealing compound system PYROLIQ PYROLIQ casting compound 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 BSS 90

91 Sealing compound system PYROLIQ VMS-TE VMS-TE 2 Contents kg kg/ , ,000 Special mortar Dry compound in plastic container to mix with tap water. Makes a gas-tight and watertight seal of fire resistance class A-60 to IMO resolution A.754(8). Including measuring cup. The mixing ratio of water to powder is :2. The mixed compound is pumpable for approx. 45 minutes. The mixture is chemically hardened after 72 hours. Stored in a dry and frost-free environment, the dry compound will keep for 3 years. Sealing compound Dimension 20 kg/00. 0,600 VMS-QMK 20x25x Foam Expanding foam modules to replace a casing in the sealing compound system if part of the casing has been lost. The modules expand by the factor 0 when sprinkled with the impregnating fluid, closing gaps and joints between the cables installed. After the cables have been impregnated they are hardly flaable, fire- retardant and self-extinguishing. Stored in a dry environment, the expanding modules have an unlimited lifespan. Expanding module, small Expanding module, large Dimension 5 kg/00. 5,200 VMS-QMG 800x25x Foam Expanding foam modules to replace a casing in the sealing compound system if part of the casing has been lost. The modules expand by the factor 0 when sprinkled with the impregnating fluid, closing gaps and joints between the cables installed. After the cables have been impregnated they are hardly flaable, fire- retardant and self-extinguishing. Stored in a dry environment, the expanding modules have an unlimited lifespan. BSS VMS-IF Contents ml 000 kg/00. 04,500 Fluid to sprinkle the expanding module. When 5 long expanding modules are used, approx. l impregnation fluid is required. Stored in a frost-free environment it has a lifespan of 2 years Impregnation fluid Sealing compound for external use 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 Contents kg VMS-VA Special mortar kg/00. 00, Flame-retardant sealing compound for insulations in sealing compound systems. Watertight and resistant against coon technical oils as well as weak/diluted acids. Halogen-free and cold-hardening. 2 components (hardener and resin) in tin with lid to push through. Lifespan of 2 months in original and closed packaging at temperature between +0 and +40 C. 9

92 Sealing compound system PYROLIQ Sealing compound, water-repellent VMS-VW Contents kg kg/00. 00, Special mortar Flame-retardant sealing compound for insulations in sealing compound systems for the application in water-filled openings. Watertight and resistant against coon technical oils as well as to weak/diluted acids. Halogen-free and cold-hardening. 2 components (hardener and resin) in tin with lid to push through. Lifespan of 6 months in original and closed packaging at temperature between +0 and +40 C. Sealing compound, conductive Contents kg VMS-VL Special mortar kg/00. 00, Electrically conductive sealing compound for insulations in sealing compound systems and for the integration of the woven cable shield in EMV compliant installations. 2 components (hardener and resin) in tin with lid to push through. Lifespan of 6 months when stored in frostfree storage. Pipe insulating strip BSS Dimension VMS-RS 000 x 00 x 3 Intumescent material 3 kg/00. 47, Insulation forming strip for the application in sealing compound system when feeding through flaable pipes. Please protect against sunlight. When stored in a dry environment it has an unlimited lifespan. Identification plate VMS-KS DE VMS-KS EN Language German English 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 kg/00. 2,400 2, PVC Polyvinylchloride Identification plate to self-labelling the insulation of the sealing compound system to the IMO A.754(8) with a waterproof and lightproof felt tip pen. Including 2 cable ties for fastening onto the cable or onto the cable tray system in the area of the insulation. 92

93 PYROPLUG foam series BSS 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 PYROPLUG foam series 93

94 PYROPLUG foam series PYROPLUG Block foam block FBA-B200-4 Dimension 200x44x60 4 kg/00. 44, Permanently elastic, closed-pore foam Foam block for cable and combination insulation, can also be used as a filler block in the PYROSIT NG fire protection foam system. The blocks must be protected against water in order to guarantee safe expansion in the case of fire. PYROPLUG Block vacuum block Dimension FBA-BV x44x25 Permanently elastic, closed-pore foam kg/00. 40, Vacuum block for cable and combination insulation. After cutting into the foil the vacuum block expands to its original size. It can be used with or without foil. The blocks must be protected against water in order to guarantee safe expansion in the case of fire. PYROPLUG Peg plugs BSS FBA-SN65 FBA-SN78 FBA-SN07 FBA-SN22 FBA-SN34 FBA-SN65 FBA-SN200 FBA-SN250 For opening Ø Dimension D Dim. d kg/00. 8,200 2,600 2,600 28,600 32,900 49,700 74,400 0, Permanently elastic, closed-pore foam Plug for cable insulation Protect the FBA plugs against water in order to guarantee secure foaming in the case of fire. PYROLPUG Box box insulation Dimension FBA-F 200 x 200 x 00 Permanently elastic, closed-pore foam kg/00. 22, Box for cable insulation. Consisting of a two-part, hard frame and two soft internal pieces. Protect the frame and internal pieces against water in order to guarantee safe foaming in case of fire. Section insulation for metal pipes Width MIW-MA Mineral fibres Thickness 2 kg/00..00, Mineral wool mats with aluminium lamination for section insulation on copper and steel pipes. Fastening with winding wire, securing of joints with aluminium adhesive tape. Applicable in the systems: PYROMIX mortar insulation PYROSIT NG fire insulation foam PYROPLATE Fibre soft insulation PYROPLUG Block stones Material class EN 350 A non-combustible; melting point,000 C 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 94

95 PYROPLUG foam series MIW-AT 0000 Aluminium adhesive tape for section insulation kg/00. 36, Aluminium adhesive tape for applying the aluminium-laminated section insulation. The aluminium adhesive tape is self-adhesive and not classified as combustible according to DIN MIW-TD St Steel VZ Galvanised Winding wire for section insulation kg/00. 0, The steel wire is used to fix the section insulation. It is non-combustible and guarantees optimum retention of the section insulation on non-combustible pipes and cables. Identification plate KS-S DE KS-S SE KS-S ES KS-S EN KS-S HR Language German Swedish Spanish English Croatian kg/00. 2,400 2,400 2,400 2,400 2, Ø 7 70 PVC Polyvinylchloride Universal identification plate to be written on with waterproof and light-resistant felt tip pen for all types of OBO insulation. For approved identification, including two push-fit anchors. BSS Width CL-KS Intumescent material kg/00. 50,000 Fire protection bandage OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 The fire protection bandage is used as cable insulation for individual cables, cable and electrical installation pipe bundles (EIR). The insulation consists of a flexible bandage, fixed using wire. When surrounding the cables, take account of how often the appropriate medium must be surrounded. Refer to the approval for details. The bandage can be used directly next to Rockwool pipe insulation. Winding wire is included. 95

96 Fire protection ducts BSS Fire protection ducts 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 96

97 Fire protection duct PYROLINE Rapid BSKM 0407 BSKM 0407 Height Width Metal fire protection duct, I30 to I20 m 2 kg/00 m 254, St Steel /m FS Strip-galvanised Sheet steel duct with intumescent inner coating. In case of fire, actively prevents the spread of fire in the duct and protects emergency and escape routes against the impacts of a cable fire. The cover and base are securely interconnected using the self-contacting patented locking brackets. This also creates the equipotential bonding. Fire resistance classes I30 to I20 according to DIN 402 Part. Mounting options: directly on the wall or under the ceiling, beneath system floors on the raw floor, or suspended on support systems or using connector elements (support spacing, max. m). Included in the delivery: Cover and base as a unit, complete. BSKM-VD 0407 St Steel FS Strip-galvanised kg/00. 24, Clamp with integrated seal for BKSM 0407, for connection and smoke-proof sealing of duct joints. Usable at min. 30 side distance of the duct to the ceiling or wall. Including loose seal for combination with support profile. Connector BSKM-VE 0407 St Steel FS Strip-galvanised 5 Connector for corner mounting kg/00. 7, Clamp with integrated seal for BKSM 0407, for smoke-proof sealing of duct joints in the case of corner mounting without duct spacing to the ceiling or wall. BSS Support BSKM-AD 0407 St Steel FS Strip-galvanised kg/00. 35, Support profile for suspended mounting of BSKM 0407, suitable as a suspension point to accept two M0 threaded rods and as the counterbearing to seal the joint, including nuts. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 BSKM-VK 0407 St Steel FS Strip-galvanised kg/00. 30, For smoke-tight end closure of the BSKM 0407 duct for direct wall and ceiling mounting, in connection with the support profile BSKM-AD 0407, even for suspended mounting. Including glued-in seals to close the joints and loose seal when combined with a support; screw for equipotential bonding also included. End piece 97

98 Fire protection duct PYROLINE Rapid BSKM 0407 Foam seal for BSKM 0407 cable exit BSKM-KA 0407 Width Height kg/00. 0, Foam Flexible adjustable foam seal for the sealing of cable bundles or cables with a large outer diameter when conducting them out of the cable end or a BSKM 0407 T branch. To seal the surface, ASX ablation coating is required. T reducing branch piece BSKM-TR 07 St Steel FS Strip-galvanised kg/00. 8, Hood for the covering of three duct ends running towards each other in a T shape. Straight stretch, twice BSKM 07, branch reduced to BSKM Including glued-in seals for closing the joints and loose seals when combining with lock plate; screws for equipotential bonding also included. Lock plate, T reducing branch piece BSKM-GR 07 St Steel FS Strip-galvanised kg/ , Adapter plate for suspended mounting of a BSKM-TR 07 T reducing branch, with acceptance option for M0 threaded rods, including nuts. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 BSS Identification plate for cable system Language kg/00. KS-E DE German 0 0, KS-E SE Swedish 0 0, KS-E EN English 0 0, KS-E HU Hungarian 0 0, KS-E PL Polish 0 0, KS-E FI Finnish 0 0, PVC Polyvinylchloride Self-adhesive identification plate for approved cable system labelling for function maintenance as required by DIN 402 part 2. 98

99 Fire protection duct PYROLINE Con S BSKH 09 BSKH BSKH 0905 BSKH Dim. B Dim. H Dim. b Dim. h Fire protection duct, internal height 50 m kg/00 m 970, , , Glass-fibre lightweight concrete /m The fibre glass light-duty concrete ducts, which can be flamed on four sides, can be mounted on OBO mounting systems, thus offering the greatest possible flexibility in cable routing in emergency and escape routes (installation duct to DIN 402 Part ) or in electrical function maintenance (to DIN 402 Part 2). This allows elegant avoidance of objects from other areas such as heating, ventilation and sanitary applications. Mounting under the ceiling is simple, using U-shaped suspended supports and a bracket, or on a U transverse profile suspended with threaded rods. The OBO BSKH is simply attached loosely. Mounted connectors ensure quick mounting in situ, whilst loosely placed covers ensure quick inspection and reassignment. BSKH-FB BSKH-FB0905 BSKH-FB09052 Dim. h Dim. b Dim. H Dim. B Dim. L bend, internal height 50 kg/ , , , Glass-fibre lightweight concrete 90 bend for BSKH I90/E30, to DIN 402 part and part 2, for installation on OBO mounting systems. Fittings must be supported by additional brackets. Including mounted connector on both duct ends, 3 x m self-adhesive sealing strip and connecting bolts. T piece, internal height 50 BSS BSKH-FT BSKH-FT0905 BSKH-FT09052 Dim. h Dim. b Dim. H Dim. B Dim. L Dim. l kg/00. 60, , , Glass-fibre lightweight concrete T piece for BSKH I90/E30, to DIN 402 part and part 2, for installation on OBO mounting systems. Fittings must be supported by additional brackets. Including mounted connector on all duct ends, 3 x m self-adhesive sealing strip and connecting bolts. End piece for internal height 50 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 BSKH-E BSKH-E0905 BSKH-E09052 Dim. B Dim. H Glass-fibre lightweight concrete End piece for fire protection duct BSKH I90/E30 Including bolts and sealing strip. BSKH-K0506 BSKH-K05 BSKH-K052 Glass-fibre lightweight concrete kg/00. 42,000 57,000 87, Wall connection collar I90 for internal height 50 kg/00. 40,000 50,000 68, Wall connection collar for BSKH, consisting of four single plates, to double the insulation for wall penetrations. Incl. fastening material. Only for I90 classification. 99

100 Fire protection duct PYROLINE Con S BSKH 09 Fire protection duct, internal height 05 BSKH 0906 BSKH Dim. B Dim. H Dim. b Dim. h m kg/00 m.720, , Glass-fibre lightweight concrete /m The fibre glass light-duty concrete ducts, which can be flamed on four sides, can be mounted on OBO mounting systems, thus offering the greatest possible flexibility in cable routing in emergency and escape routes (installation duct to DIN 402 Part ) or in electrical function maintenance (to DIN 402 Part 2). This allows elegant avoidance of objects from other areas such as heating, ventilation and sanitary applications. Mounting under the ceiling is simple, using U-shaped suspended supports and a bracket, or on a U transverse profile suspended with threaded rods. The OBO BSKH is simply attached loosely. Mounted connectors ensure quick mounting in situ, whilst loosely placed covers ensure quick inspection and reassignment. 90 bend, internal height 05 BSKH-FB0906 BSKH-FB09026 Dim. h Dim. b Dim. H Dim. B Dim. L kg/00..00, , Glass-fibre lightweight concrete 90 bend for BSKH I90/E30, to DIN 402 part and part 2, for installation on OBO mounting systems. Fittings must be supported by additional brackets. Including mounted connector on both duct ends, 3 x m self-adhesive sealing strip and connecting bolts. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 BSS 00

101 Fire protection duct PYROLINE Con S BSKH 09 BSKH-FT0906 BSKH-FT09026 Dim. h Dim. b Dim. H Dim. B Dim. L Dim. l T piece, internal height 05 kg/00..80, , Glass-fibre lightweight concrete T piece for BSKH I90/E30, to DIN 402 part and part 2, for installation on OBO mounting systems. Fittings must be supported by additional brackets. Including mounted connector on all duct ends, 3 x m self-adhesive sealing strip and connecting bolts. End piece for internal height 05 BSKH-E0906 BSKH-E09026 Dim. B Dim. H Glass-fibre lightweight concrete End piece for fire protection duct BSKH I90/E30 Including bolts and sealing strip. kg/00. 0,000 42, Wall connection collar I90 for internal height 05 BSKH-K06 BSKH-K026 Glass-fibre lightweight concrete kg/00. 68,000 88, Wall connection collar for BSKH, consisting of four single plates, to double the insulation for wall penetrations. Incl. fastening material. Only for I90 classification. BSS Dimension m BSK-D x 30 5 Foam Self-adhesive sealing strip for BSK I90/E30 and BSKH I90/E30 kg/00. 37,500 Sealing strip I90/E Doubler I90 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 BSK-A0908 BSK-A090 Dimension A Dim. D kg/00. 0,000 4,000 Glass-fibre lightweight concrete Doubler for cable routing for BSK I90 and for BSKH I90. BSK-A0908 for duct heights to 95, BSK-A090 for duct heights from 0. Including fastening screws

102 Fire protection duct PYROLINE Con S BSKH 09 Connector set BSKH-V050 BSKH-V052 BSKH-V0 Dim. B Dim. H kg/00. 22,000 26,000 40, St Steel FS Strip-galvanised Connection set as replacement, consisting of a pair of connection plates, left/right, bolts for fastening the connectors to the duct and bolts with nuts to connect the individual duct lengths. BSKH-V050 for and BSKH-V052 for BSKH-V0 for and Mortar BSK-M Special mortar kg/ , Fire protection duct mortar, dried ready-to-use mortar in a bucket for filling joints and small cracks when mounting the fire protection ducts BSK and BSKH. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 BSS 02

103 Anchorings BSS 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 Fastening systems 03

104 Injection tie Injection mortar in cartridge VMU plus 280 Contents ml 280 kg/00. 56, Special mortar Styrene-free, vinyl ester composite mortar for spread-free anchoring of high loads with threaded anchor rods. Standard cartridge with two foil bags (2-components) including one mixing tube. To be worked with the pressing gun, type VM-P 345 Profi, or standard silicone presses. European technical approval for cracked and uncracked concrete, as well as for masonry of full and hollow brick. Earthquake-proof in concrete according to Category C. Fire protection approval for concrete and masonry with fire resistance classes up to 20 minutes. Substrate temperature during processing 0 C to +40 C (concrete), ambient temperature after complete hardening 40 C to +20 C (in concrete). If stored in a dark, cool and dry place, will keep for at least 2 months. Injection mortar in cartridge Contents ml kg/00. 83,000 VMU plus Special mortar Styrene-free, vinyl ester composite mortar for spread-free anchoring of high loads with threaded anchor rods. Coaxial cartridge, including one mixing tube, to be worked with the pressing gun, type VM-P 380 Profi. European technical approval for cracked and uncracked concrete, as well as for masonry of full and hollow brick. Earthquake-proof in concrete according to Category C. Fire protection approval for concrete and masonry with fire resistance classes up to 20 minutes. BSS Substrate temperature during processing 0 C to +40 C (concrete), ambient temperature after complete hardening 40 C to +20 C (in concrete). If stored in a dark, cool and dry place, will keep for at least 2 months. Pressing gun for mortar cartridge VM-P 345 Profi Plastic kg/00. 00, Side-by-side cartridge pistol for the use of standard cartridges or side-by-side cartridges. The cartridge pistol is suitable for the injection mortar VMU plus 280 and can also be used with normal 300 ml cartridges. Pressing gun for 0: coaxial cartridges VM-P 380 Profi Plastic kg/00. 0, High-quality two-component cartridge pistol. The parallel movement of the outlet to the holding grip ensures easy working. Suitable for the injection mortar type VMU plus OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 04

105 Injection tie Anchor rod VMU-AH 6-65vz VMU-AH 8-65vz VMU-AH 8-20vz VMU-AH 0-40vz VMU-AH 0-60vz VMU-AH 2-65vz Dim. L Dim. d SW Thread M M M M M M kg/00.,880 2,600 4,900 7,900 8,600 2, St Steel /00 pc. G Electrogalvanised Anchor rod of quality 5.8 for use in the injection mortar system VMU plus. Including washer and hexagonal nut. Use the wire sleeve VMU-SH 2x50 for the anchor rods M6 (L = 65 ) and M8 (L = 65 ). Should the anchor rods M8 (L = 20 ), M0 (L = 40 ), M0 (L = 60 ) and M2 (L = 65 ) be used, then use the wire sleeve VMU-SH 8x95. Anchor rod Dim. L VMU-AH 6-65A4 VMU-AH 8-20A4 VMU-AH 0-40A4 VMU-AH 2-65A4 V4A Stainless steel, A4 Dim. d SW Thread M M M M kg/00.,880 4,900 7,900 24, /00 pc. Stainless steel anchor rod for use in the injection mortar system VMU plus. Including washer and hexagonal nut. Use the wire sleeve VMU-SH 2x50 for the anchor rods M6 (L = 65 ) and M8 (L = 65 ). Should the anchor rods M8 (L = 20 ), M0 (L = 40 ), M0 (L = 60 ) and M2 (L = 65 ) be used, then use the wire sleeve VMU-SH 8x95. BSS VMU-SH 2x50 VMU-SH 8x95 Dim. L Dim. d kg/00. 0,00 0, PA Polyamide /00 pc. Plastic wire sleeve for use in hollow brick and stones in combination with injection mortar system VMU plus. Plastic wire sleeve Perforated sleeve, metal 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 Dim. Dim. L d kg/00. VM-SH 2x , VM-SH 6x , VM-SH 22x , St Steel /00 pc. Metal wire sleeve for use in hollow brick and stones in combination with injection mortar system VMU plus. kg/00. VM-AP , Plastic Manual pump with 750 ml air volume to blow out drill holes according to anchor approval. Blow pump for drill holes 05

106 Injection tie Steel cleaning brush for drill holes H-RB M6 280 kg/00. 2, St Steel Adapter for accepting steel wire brushes for manual cleaning of drill holes according to the anchor approval. Steel cleaning brush for drill holes RB-MW 8 M6 RB-MW 0 M6 RB-MW 2 M6 RB-MW 4 M6 RB-MW 8 M6 Diameter Thread kg/00. 26,000 2,500 2,500 2,500 4, M M M M M6 St Steel Steel wire brushes for cleaning of drill holes according to the anchor approval. With threaded connection for SDS adapter. SDS adapter BSS RBL M6 SDS St Steel kg/00. 6, Adapter for accepting steel wire brushes for mechanical cleaning of drill holes according to the anchor approval. Suitable for drills with SDS seat. SDS-Extension kg/00. 9,700 RB-L 50 M St Steel Extension with internal and external M6 thread for the connection of the SDS adapter with steel wire brush in difficult to access drill holes. Mixer pipe for mortar cartridge kg/00. VM-X 2, PA Polyamide Mixing tubes for attachment to the cartridges of the VMU plus injection mortar system. Extension pipe VM-XE 0/200 VM-XE 0/ kg/00.,000 2, PA Polyamide Fixed length extension tube for use on the mixing tube tips in the VMU plus injection mortar system. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 06

107 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 07

108 08 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206

109 LFS product innovations Device installation trunking Rapid 45-2, -compartment, trunking width 00 2 Device installation trunking Rapid 45-2, 2-compartment, trunking width 30 5 Device installation trunking Rapid 45-2, 2-compartment, trunking width 65 8 Device installation trunking Rapid 45-2, -compartment, trunking width 00 2 Device installation trunking Rapid 45-2, 2-compartment, trunking width Device installation trunking Rapid 45-2, 2-compartment, trunking width Device installation trunking Rapid 80, -compartment, trunking width 30 Halogen-free Device installation trunking Rapid 80, -compartment, trunking width 70 Halogen-free OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 09

110 A clear shape meets technical efficiency The new Rapid 45 generation unites a syetrical design, homogeneous colour quality and technical flexibility in a single system. Innovative fittings allow practical wall installation in administration buildings, coercial areas and in industry. In three dimensions, the Rapid 45-2 device installation trunking offers a wide range of applications. Plastic 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 LFS 0

111 Aluminium 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 LFS Device installation Switches, sockets and data technology elements of the OBO Modul 45 and Modul 45connect series can simply be clicked into the trunking profile. A compact system, which can be mounted quickly and expanded easily.

112 Trunking height 53, trunking width 00 Device installation trunking Rapid 45-2, type GK-5300 GK-5300RW GK-5300LGR Pure white 2000 Light grey 2000 m 2 2 kg/00 m 30,300 30, PVC Polyvinylchloride /m Trunking base and cover with base perforation for direct wall mounting. Trunking connector and joint cover GK-KS45-RW GK-KS45-LGR Pure white Light grey 6 6 kg/00. 0,590 0, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Joint cover for the bases of the Rapid 45-2 device installation trunking to hide cut edges and provide a perfect connection of the trunking segments. The joint covers are attached. Suitable for trunking width 00 and 65. Flat angle GK-FS5300RW GK-FS5300LGR Pure white Light grey kg/00. 34,600 34,600 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Flat angle for changing the direction of the Rapid 45-2 device installation trunking Flat angle cover LFS GK-FH5300RW GK-FH5300LGR Pure white Light grey 2 2 kg/00. 9,800 9, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Flat angle as hood fitting for changing the direction of the Rapid 45-2 device installation trunking. Internal corner GK-IS5300RW GK-IS5300LGR Pure white Light grey kg/00. 34,200 34, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene 90 internal corner for changing the direction of the Rapid 45-2 device installation trunking. Internal corner cover GK-IH5300RW GK-IH5300LGR Pure white Light grey kg/00. 2,000 2, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Internal corner cover for changing the direction of Rapid 45 device installation trunking. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 2

113 Trunking height 53, trunking width 00 GK-AS5300RW GK-AS5300LGR Pure white Light grey kg/00. 40,400 40, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene 90 fixed external corner for changing the direction of Rapid 45-2 device installation trunking. External corner GK-AH5300RW GK-AH5300LGR Pure white Light grey kg/00. 6,900 6,900 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene External corner cover for changing the direction of Rapid 45-2 device installation trunking. The fittings can be adjusted between External corner cover GK-TR5300RW GK-TR5300LGR Pure white Light grey kg/00. 3,00 3, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene T piece adapter to create a 90 branch of the system size 5300 on the system size 5300th T piece adapter T piece adapter on WDK GK-TA WDK RW GK-TA WDK LGR Pure white Light grey kg/00. 2,500 2, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene T piece adapter to create a 90 branch of the system size Rapid and 5365 on a cable trunking WDK LFS End piece GK-E5300RW GK-E5300LGR Pure white Light grey kg/00. 2,00 2, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene End piece for lateral closing the device installation trunking, Rapid 45-2 GK and GA OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 GK-OT45RW GK-OT45LGR Pure white 2000 Light grey 2000 m kg/00 m 20,550 20, PVC Polyvinylchloride /m Trunking cover for closing the Rapid 45-2 device installation trunking. Cover 3

114 Trunking height 53, trunking width 00 Joint cover GK-OTSA45RW GK-OTSA45LGR Pure white Light grey 6 6 kg/00. 0,550 0, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Joint cover for the covers of the Rapid 45-2 device installation trunking to hide cut edges and provide a tidy connection to installed Modul 45 devices. Partition m kg/00 m GK-TW53 Light grey , PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene /m Partition for mounting in Rapid 45-2 GK and GA device installation trunking for installing cables of different voltage levels. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 LFS 4

115 Trunking height 53, trunking width 30 GK-5330RW GK-5330LGR Pure white 2000 Light grey 2000 Device installation trunking Rapid 45-2, type GK-5330 m 8 8 kg/00 m 74,000 74, PVC Polyvinylchloride /m Trunking base and cover with base perforation for direct wall mounting. GK-KS45-2RW GK-KS45-2LGR Pure white Light grey Trunking connector and joint cover 6 6 kg/00. 0,455 0, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Joint cover for the bases of the Rapid 45 device installation trunking to hide cut edges and provide a perfect connection of the trunking segments. The joint covers are attached. Suitable for trunking width 30. GK-FS5330RW GK-FS5330LGR Pure white Light grey kg/00. 60,200 60,200 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Flat angle for changing the direction of the Rapid 45-2 device installation trunking Flat angle Flat angle cover GK-FH5330RW GK-FH5330LGR Pure white Light grey 2 2 kg/00. 2,700 2, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Flat angle as hood fitting for changing the direction of the Rapid 45-2 device installation trunking. LFS Internal corner GK-IS5330RW GK-IS5330LGR Pure white Light grey kg/00. 44,400 44, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene 90 internal corner for changing the direction of the Rapid 45-2 device installation trunking. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 GK-IH5330RW GK-IH5330LGR Pure white Light grey kg/00. 3,70 3,70 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Internal corner cover for changing the direction of Rapid 45 device installation trunking. Internal corner cover

116 Trunking height 53, trunking width 30 External corner GK-AS5330RW GK-AS5330LGR Pure white Light grey kg/00. 56,200 56,200 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene External corner for changing the direction of Rapid 45-2 device installation trunking External corner cover GK-AH5330RW GK-AH5330LGR Pure white Light grey kg/00. 8,000 8, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene External corner cover for changing the direction of Rapid 45-2 device installation trunking. The fittings can be adjusted between T piece adapter GK-TR5330RW GK-TR5330LGR Pure white Light grey kg/00. 3,200 3, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene T piece adapter to create a 90 -Abzweiges of the system size 5330 on the system size T piece adapter on WDK LFS GK-TA WDK 2RW GK-TA WDK 2LGR Pure white Light grey kg/00. 2,200 2, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene T piece adapter to create a 90 -Abzweiges of the system size Rapid on a cable trunking WDK End piece GK-E5330RW GK-E5330LGR Pure white Light grey kg/00. 2,700 2, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene End piece for side closing of the Rapid 45-2 GK and GA 5330 device installation trunking. Cover GK-OT45RW GK-OT45LGR Pure white 2000 Light grey 2000 m kg/00 m 20,550 20, PVC Polyvinylchloride /m Trunking cover for closing the Rapid 45-2 device installation trunking. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 6

117 Trunking height 53, trunking width 30 GK-OTSA45RW GK-OTSA45LGR Pure white Light grey 6 6 kg/00. 0,550 0, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Joint cover for the covers of the Rapid 45-2 device installation trunking to hide cut edges and provide a tidy connection to installed Modul 45 devices. Joint cover m kg/00 m GK-TW53 Light grey , PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene /m Partition for mounting in Rapid 45-2 GK and GA device installation trunking for installing cables of different voltage levels. Partition 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 LFS 7

118 Trunking height 53, trunking width 65 Device installation trunking Rapid 45-2, type GK-5365 GK-5365RW GK-5365LGR Pure white 2000 Light grey 2000 m 8 8 kg/00 m 26,250 26, PVC Polyvinylchloride /m Trunking base and cover with base perforation for direct wall mounting. Trunking connector and joint cover GK-KS45-RW GK-KS45-LGR Pure white Light grey 6 6 kg/00. 0,590 0, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Joint cover for the bases of the Rapid 45-2 device installation trunking to hide cut edges and provide a perfect connection of the trunking segments. The joint covers are attached. Suitable for trunking width 00 and 65. Flat angle GK-FS5365RW GK-FS5365LGR Pure white Light grey kg/00. 64,500 64,500 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Flat angle for changing the direction of the Rapid 45-2 device installation trunking Flat angle cover LFS GK-FH5365RW GK-FH5365LGR Pure white Light grey 2 2 kg/00. 6,300 6, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Flat angle as hood fitting for changing the direction of the Rapid 45-2 device installation trunking. Internal corner GK-IS5365RW GK-IS5365LGR Pure white Light grey kg/00. 54,500 54, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene 90 internal corner for changing the direction of the Rapid 45-2 device installation trunking. Internal corner cover GK-IH5365RW GK-IH5365LGR Pure white Light grey kg/00. 4,660 4, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Internal corner cover for changing the direction of Rapid 45 device installation trunking. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 8

119 Trunking height 53, trunking width 65 GK-AS5365RW GK-AS5365LGR Pure white Light grey kg/00. 66,800 66,800 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene External corner for changing the direction of Rapid 45-2 device installation trunking External corner GK-AH5365RW GK-AH5365LGR Pure white Light grey kg/00. 9,230 9,230 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene External corner cover for changing the direction of Rapid 45-2 device installation trunking. The fittings can be adjusted between External corner cover GK-TR5365RW GK-TR5365LGR Pure white Light grey kg/00. 4,040 4, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene T piece adapter to create a 90 -Abzweiges of the system size 5365 on the system size 5365th T piece adapter T piece adapter WDK GK-TA WDK RW GK-TA WDK LGR Pure white Light grey kg/00. 2,500 2, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene T piece adapter to create a 90 branch of the system size Rapid and 5365 on a cable trunking WDK LFS End piece GK-E5365RW GK-E5365LGR Pure white Light grey kg/00. 3,240 3, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene End piece for side closing of the Rapid 45-2 GK and GA 5365 device installation trunking. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 GK-OT45RW GK-OT45LGR Pure white 2000 Light grey 2000 m kg/00 m 20,550 20, PVC Polyvinylchloride /m Trunking cover for closing the Rapid 45-2 device installation trunking. Cover 9

120 Trunking height 53, trunking width 65 Joint cover GK-OTSA45RW GK-OTSA45LGR Pure white Light grey 6 6 kg/00. 0,550 0, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Joint cover for the covers of the Rapid 45-2 device installation trunking to hide cut edges and provide a tidy connection to installed Modul 45 devices. Partition m kg/00 m GK-TW53 Light grey , PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene /m Partition for mounting in Rapid 45-2 GK and GA device installation trunking for installing cables of different voltage levels. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 LFS 20

121 Trunking height 53, trunking width 00 GA-5300EL GA-5300RW 2000 Pure white 2000 Device installation trunking Rapid 45-2, type GA-5300 m 8 8 kg/00 m 223, , Alu Aluminium EL Anodised Aluminium complete device installation trunking, consisting of a base and cover. The base has no floor perforation. /m GK-KS45-AL GK-KS45-RW Aluminium Pure white Trunking connector and joint cover 6 6 kg/00. 0,580 0, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Joint cover for the bases of the Rapid 45-2 device installation trunking to hide cut edges and provide a perfect connection of the trunking segments. The joint covers are attached. Suitable for trunking width 00 and 65. GA-FS5300EL GA-FS5300RW Pure white kg/00. 69,200 69, Alu Aluminium EL Anodised 90 aluminium flat angle for direction change of Rapid 45-2 GA... device installation trunking. Flat angle Flat angle cover GK-FH5300AL GK-FH5300RW Aluminium Pure white 2 2 kg/00. 9,800 9, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Flat angle as hood fitting for changing the direction of the Rapid 45-2 device installation trunking. LFS Internal corner 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 GA-IS5300EL GA-IS5300RW Pure white kg/00. 69,200 69, Alu Aluminium EL Anodised Corner 90 aluminum for changing the direction of device installation trunking Rapid 45-2 GA... GK-IH5300AL GK-IH5300RW Aluminium Pure white kg/00. 2,000 2,000 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Internal corner cover for changing the direction of Rapid 45 device installation trunking. Internal corner cover

122 Trunking height 53, trunking width 00 External corner GA-AS5300EL GA-AS5300RW Pure white kg/00. 84,00 84, Alu Aluminium EL Anodised Outside corner 90 aluminum for changing the direction of device installation trunking Rapid 45-2 GA... External corner cover GK-AH5300AL GK-AH5300RW Aluminium Pure white kg/00. 6,900 6, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene External corner cover for changing the direction of Rapid 45-2 device installation trunking. The fittings can be adjusted between T piece adapter GK-TR5300AL GK-TR5300RW Aluminium Pure white kg/00. 3,00 3, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene T piece adapter to create a 90 branch of the system size 5300 on the system size 5300th T piece adapter WDK LFS GK-TA WDK AL GK-TA WDK RW Aluminium Pure white kg/00. 2,500 2, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene T piece adapter to create a 90 branch of the system size Rapid and 5365 on a cable trunking WDK End piece GK-E5300AL GK-E5300RW Aluminium Pure white kg/00. 2,200 2, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene End piece for lateral closing the device installation trunking, Rapid 45-2 GK and GA Cover GA-OT45EL GA-OT45RW 2000 Pure white 2000 m kg/00 m 47,450 47, Alu Aluminium /m EL Anodised Cover for closing the device installation trunking of the series Rapid 45-2 GA... The 2-piece shell is made of a PVC-base profile and an aluminum screening profile. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 22

123 Trunking height 53, trunking width 00 GK-OTSA45AL GK-OTSA45RW Aluminium Pure white 6 6 kg/00. 0,550 0, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Joint cover for the covers of the Rapid 45-2 device installation trunking to hide cut edges and provide a tidy connection to installed Modul 45 devices. Joint cover m kg/00 m GK-TW53 Light grey , PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene /m Partition for mounting in Rapid 45-2 GK and GA device installation trunking for installing cables of different voltage levels. Partition 8AWR St Steel G Electrogalvanised Protective conductor connection bracket 0 kg/00. 0, Protective conductor connection bracket to include steel and aluminium device installation trunking, service poles and system components of underfloor trunking systems in the protective measure. Clamping area : 2 x.5 4 ² 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 LFS 23

124 Trunking height 53, trunking width 30 Device installation trunking Rapid 45-2, type GA-5330 GA-5330EL GA-5330RW 2000 Pure white 2000 m 2 2 kg/00 m 326, , Alu Aluminium /m EL Anodised Aluminium device installation trunking, complete, comprising bottom and top part. The lower part is without base perforation. Trunking connector and joint cover GK-KS45-2AL GK-KS45-RW Aluminium Pure white 6 6 kg/00. 0,450 0, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Joint cover for the bases of the Rapid 45 device installation trunking to hide cut edges and provide a perfect connection of the trunking segments. The joint covers are attached. Suitable for trunking width 30. Flat angle GA-FS5330EL GA-FS5330RW Pure white kg/00. 9,900 9, Alu Aluminium EL Anodised 90 aluminium flat angle for direction change of Rapid 45-2 GA... device installation trunking. Flat angle cover LFS GK-FH5330AL GK-FH5330RW Aluminium Pure white 2 2 kg/00. 2,700 2, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Flat angle as hood fitting for changing the direction of the Rapid 45-2 device installation trunking. Internal corner GA-IS5330EL GA-IS5330RW Internal corner cover Pure white kg/00. 89,200 89, Alu Aluminium EL Anodised Corner 90 aluminum for changing the direction of device installation trunking Rapid 45-2 GA... GK-IH5330AL GK-IH5330RW Aluminium Pure white kg/00. 3,70 3, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Internal corner cover for changing the direction of Rapid 45 device installation trunking. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 24

125 Trunking height 53, trunking width 30 GA-AS5330EL GA-AS5330RW Pure white kg/00. 7,700 7, Alu Aluminium EL Anodised Outside corner 90 aluminium for changing the direction of device installation trunking Rapid 45-2 GA... External corner GK-AH5330AL GK-AH5330RW Aluminium Pure white kg/00. 8,000 8,000 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene External corner cover for changing the direction of Rapid 45-2 device installation trunking. The fittings can be adjusted between External corner cover GK-TR5330AL GK-TR5330RW Aluminium Pure white kg/00. 3,200 3, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene T piece adapter to create a 90 -Abzweiges of the system size 5330 on the system size T piece adapter T piece adapter WDK GK-TA WDK 2AL GK-TA WDK 2RW Aluminium Pure white kg/00. 2,200 2, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene T piece adapter to create a 90 -Abzweiges of the system size Rapid on a cable trunking WDK LFS End piece GK-E5330AL GK-E5330RW Aluminium Pure white kg/00. 2,700 2, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene End piece for side closing of the Rapid 45-2 GK and GA 5330 device installation trunking. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 GA-OT45EL GA-OT45RW 2000 Pure white 2000 m kg/00 m 47,450 47, Alu Aluminium /m EL Anodised Cover for closing the device installation trunking of the series Rapid 45-2 GA... The 2-piece shell is made of a PVC-base profile and an aluminum screening profile. Cover 25

126 Trunking height 53, trunking width 30 Joint cover GK-OTSA45AL GK-OTSA45RW Aluminium Pure white 6 6 kg/00. 0,550 0, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Joint cover for the covers of the Rapid 45-2 device installation trunking to hide cut edges and provide a tidy connection to installed Modul 45 devices. Partition m kg/00 m GK-TW53 Light grey , PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene /m Partition for mounting in Rapid 45-2 GK and GA device installation trunking for installing cables of different voltage levels. Protective conductor connection bracket 8AWR St Steel G Electrogalvanised 0 kg/00. 0, Protective conductor connection bracket to include steel and aluminium device installation trunking, service poles and system components of underfloor trunking systems in the protective measure. Clamping area : 2 x.5 4 ² 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 LFS 26

127 Trunking height 53, trunking width 65 GA-5365EL GA-5365RW 2000 Pure white 2000 Device installation trunking Rapid 45-2, type GA-5365 m 6 6 kg/00 m 370, , Alu Aluminium /m EL Anodised Aluminium device installation trunking, complete, comprising bottom and top part. The lower part is without base perforation. GK-KS45-AL GK-KS45-RW Aluminium Pure white Trunking connector and joint cover 6 6 kg/00. 0,580 0, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Joint cover for the bases of the Rapid 45-2 device installation trunking to hide cut edges and provide a perfect connection of the trunking segments. The joint covers are attached. Suitable for trunking width 00 and 65. GA-FS5365EL GA-FS5365RW Pure white kg/00. 2,900 2, Alu Aluminium EL Anodised 90 aluminium flat angle for direction change of Rapid 45-2 GA... device installation trunking. Flat angle Flat angle cover GK-FH5365AL GK-FH5365RW Aluminium Pure white 2 2 kg/00. 6,300 6, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Flat angle as hood fitting for changing the direction of the Rapid 45-2 device installation trunking. LFS Internal corner 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 GA-IS5365EL GA-IS5365RW Pure white kg/00. 00,00 00, Alu Aluminium EL Anodised Corner 90 aluminium for changing the direction of device installation trunking Rapid 45-2 GA... GK-IH5365AL GK-IH5365RW Aluminium Pure white kg/00. 4,660 4,660 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Internal corner cover for changing the direction of Rapid 45 device installation trunking. Internal corner cover

128 Trunking height 53, trunking width 65 External corner GA-AS5365EL GA-AS5365RW Pure white kg/00. 4,200 4, Alu Aluminium EL Anodised Outside corner 90 aluminum for changing the direction of device installation trunking Rapid 45-2 GA... External corner cover GK-AH5365AL GK-AH5365RW Aluminium Pure white kg/00. 9,230 9, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene External corner cover for changing the direction of Rapid 45-2 device installation trunking. The fittings can be adjusted between T piece adapter GK-TR5365AL GK-TR5365RW Aluminium Pure white kg/00. 4,040 4, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene T piece adapter to create a 90 -Abzweiges of the system size 5365 on the system size 5365th T piece adapter WDK LFS GK-TA WDK AL GK-TA WDK RW Aluminium Pure white kg/00. 2,500 2, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene T piece adapter to create a 90 branch of the system size Rapid and 5365 on a cable trunking WDK End piece GK-E5365AL GK-E5365RW Aluminium Pure white kg/00. 3,240 3, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene End piece for side closing of the Rapid 45-2 GK and GA 5365 device installation trunking. Cover GA-OT45EL GA-OT45RW 2000 Pure white 2000 m kg/00 m 47,450 47, Alu Aluminium /m EL Anodised Cover for closing the device installation trunking of the series Rapid 45-2 GA... The 2-piece shell is made of a PVC-base profile and an aluminum screening profile. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 28

129 Trunking height 53, trunking width 65 GK-OTSA45AL GK-OTSA45RW Aluminium Pure white 6 6 kg/00. 0,550 0, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Joint cover for the covers of the Rapid 45-2 device installation trunking to hide cut edges and provide a tidy connection to installed Modul 45 devices. Joint cover m kg/00 m GK-TW53 Light grey , PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene /m Partition for mounting in Rapid 45-2 GK and GA device installation trunking for installing cables of different voltage levels. Partition 8AWR St Steel G Electrogalvanised Protective conductor connection bracket 0 kg/00. 0, Protective conductor connection bracket to include steel and aluminium device installation trunking, service poles and system components of underfloor trunking systems in the protective measure. Clamping area : 2 x.5 4 ² 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 LFS 29

130 The new standard for cable routing with plastic trunking OBO halogen-free cable routing systems protect people, the environment and property. All the products are made from high-quality PC/ABS (polycarbonate/acrylonitrile butadiene styrene). This material is one of the self-extinguishing plastics. For safe cable routing, OBO can offer halogen-free WDKH wall and ceiling trunking, as well as halogenfree VKH wiring trunking for switching cabinet construction. A new feature of the product range is the Rapid 80 device installation trunking system GKH, which is completely halogen-free, along with all of its fittings. OBO makes the three cable routing systems available in all the standard dimensions. They are easy to mount and are sturdy, are produced to a high level of quality and are dimensionally stable. Rapid 80 GKH halogen-free Rapid 80 device installation trunking allows flexible and quick access to energy and data on the wall. It is primarily used in public facilities and offices. WDKH halogen-free OBO wall and ceiling trunking ensures safe cable routing. It can be used as wall or ceiling trunking. VKH halogen-free OBO wiring trunking from our Dahl system ensures tidy, clear wiring in a switching cabinet. The safety aspects Low smoke creation Low toxicity of the smoke gases Scarcely any release of corrosive gases Perfectly suited to public areas 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 LFS 30

131 Trunking height 70, trunking height 30, halogen-free GKH-7030RW Pure white 2000 Device installation trunking, type GKH7030 m 8 kg/00 m 2, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene /m GKH device installation trunking made of halogen-free PC/ABS, suitable for direct wall mounting or on wall brackets. Fastening takes place using the perforation in the trunking. The GKH device installation trunking possesses a C profile on the floor to accept a plastic partition. All the switch prograes with a support ring and support clamp design as well as Modul 45 installation devices can be installed in the accessory mounting boxes of series 7GD... The system opening is On each trunking length, a coupling pair is pre-assembled on one side. GK-KUP Light grey ABS/ASA Acrylonitrile butadiene styrene PU kg/00 PUs 2, /VPE Coupling as trunking connector for tight connection of the trunking sections. A coupling pair is included and pre-mounted for each stock length. Coupling 7GD6 PA Polyamide Accessory mounting box, single Front locking accessory mounting box for switch systems, with folding, and also removable, base for time saving cable connection, with feed openings for cable diameters of up to 4. Accessory mounting box, double 7GD7 PA Polyamide Front locking accessory mounting box for standard switch ranges for the installation of two individual installation devices or a multiple power socket. LFS Strain relief 7ZE PA Polyamide Strain relief with locking clips, suitable for the accessory mounting boxes 7GD... and 7GD OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 m kg/00 m GKH-OTGRW Pure white , PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene /m Smooth trunking cover made of halogen-free PC/ABS, for closing device installation trunking with 80 system opening. Trunking cover, smooth 76,5 3

132 Trunking height 70, trunking height 30, halogen-free External corner cover, variable 30, GK-AH7030RW Pure white 30.5 kg/00. 6, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene External corner cover made of halogen-free PC/ABS for changing the direction of Rapid 80 device installation trunking of the GK, GKH, GS and GA systems. The fittings can be variably adjusted between 80 and 00 and can be used in syetrical and asyetrical trunking. External corner GKH-A7030RW Pure white PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene kg/00. 00, External corner made of halogen-free PC/ABS for changing the direction of the GKH device installation trunking. External corner cover, smooth GKH-OTGARW Pure white PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene PC/ABS external corner cover, smooth surface. 2 kg/00. 7, ,50 Flat angle cover 72,5 73 GK-FH7030RW Pure white 72.5 kg/00. 7, LFS 38 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Flat angle cover fitting made of halogen-free PC/ABS for simple creation of a rising or falling 90 change of direction with device installation trunking of the series Rapid 80 GK, GKH, GS and GA. The flat angle cover fitting can be used for syetrical and asyetrical trunking types. Flat angle GKH-F7030RW Pure white kg/00. 66, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Flat angle made of halogen-free PC/ABS for changing the direction of the GKH device installation trunking. Flat angle cover, smooth 76, GKH-OTGFRW Pure white PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Flat angle cover made of halogen-free PC/ABS. kg/00. 3, OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 32

133 Trunking height 70, trunking height 30, halogen-free Internal corner cover, variable GK-IH7030RW Pure white 45 kg/00. 4, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Internal corner cover made of halogen-free PC/ABS for changing the direction of Rapid 80 device installation trunking of the GK, GKH GS and GA systems. The fittings can be variably adjusted between 85 and 95 and can be used in syetrical and asyetrical trunking ± Internal corner GKH-I7030RW Pure white PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene kg/00. 90, Internal corner made of halogen-free PC/ABS for changing the direction of the GKH device installation trunking. LFS T piece GKH-T7030RW Dimension a Pure white Dim. b kg/00. 82, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene T piece made of halogen-free PC/ABS for changing the direction of the GKH device installation trunking. 320 End piece kg/00. GKH-E7030RW Pure white 4, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene End piece made of halogen-free PC/ABS for closing the GKH device installation trunking. Partition m kg/00 m GKH-TW70 Pure white , PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene /m Partition made of halogen-free PC/ABS for mounting in Rapid 80 GKH (GA) device installation trunking or ISS service poles for installing cables of different voltage levels. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 KL80A PA Polyamide Trunking clamp for holding cables securely and for fastening the partition in Rapid 80 GK, GS and GA device installation trunking systems as well as in ISS service poles with a 76.5 system opening. Trunking clamp 33

134 Trunking height 70, trunking height 70, halogen-free Device installation trunking, type GKH7070 GKH-7070RW Pure white 2000 m 8 kg/00 m 5, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene /m GKH device installation trunking made of halogen-free PC/ABS, suitable for direct wall mounting or on wall brackets. Fastening takes place using the perforation in the trunking. The GKH device installation trunking possesses a C profile on the floor to accept a plastic partition. All the switch prograes with a support ring and support clamp design as well as Modul 45 installation devices can be installed in the accessory mounting boxes of series 7GD... The system opening is On each trunking length, a coupling pair is pre-assembled on one side. Coupling GK-KUP Light grey ABS/ASA Acrylonitrile butadiene styrene PU kg/00 PUs 2, /VPE Coupling as trunking connector for tight connection of the trunking sections. A coupling pair is included and pre-mounted for each stock length. Accessory mounting box, single 7GD6 PA Polyamide Front locking accessory mounting box for switch systems, with folding, and also removable, base for time saving cable connection, with feed openings for cable diameters of up to 4. Accessory mounting box, double LFS 7GD7 PA Polyamide Front locking accessory mounting box for standard switch ranges for the installation of two individual installation devices or a multiple power socket. Strain relief 7ZE PA Polyamide Strain relief with locking clips, suitable for the accessory mounting boxes 7GD... and 7GD.... Trunking cover, smooth 76,5 m kg/00 m GKH-OTGRW Pure white , PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene /m Smooth trunking cover made of halogen-free PC/ABS, for closing device installation trunking with 80 system opening. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 34

135 Trunking height 70, trunking height 70, halogen-free External corner cover, variable GK-AH7070RW Pure white 30.5 kg/00. 8, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene External corner cover made of halogen-free PC/ABS for changing the direction of Rapid 80 device installation trunking of the GK, GKH, GS and GA systems. The fittings can be variably adjusted between 80 and 00 and can be used in syetrical and asyetrical trunking , GKH-A7070RW Pure white PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene kg/00. 9, External corner made of halogen-free PC/ABS for changing the direction of the GKH device installation trunking. External corner External corner cover, smooth GKH-OTGARW Pure white PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene PC/ABS external corner cover, smooth surface. 2 kg/00. 7, , Flat angle cover GK-FH7070RW Pure white 22.5 kg/00. 2, ,5 73 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Flat angle cover fitting made of halogen-free PC/ABS for simple creation of a rising or falling 90 change of direction with device installation trunking of the series Rapid 80 GK, GKH, GS and GA. The flat angle cover fitting can be used for syetrical and asyetrical trunking types. 78 LFS Flat angle GKH-F7070RW Pure white kg/00. 73, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Flat angle made of halogen-free PC/ABS for changing the direction of the GKH device installation trunking OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 GKH-OTGFRW Pure white PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Flat angle cover made of halogen-free PC/ABS. kg/00. 3,000 Flat angle cover, smooth ,

136 Trunking height 70, trunking height 70, halogen-free Internal corner cover, variable ± GK-IH7070RW Pure white 45 kg/00. 6, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Internal corner cover made of halogen-free PC/ABS for changing the direction of Rapid 80 device installation trunking of the GK, GKH GS and GA systems. The fittings can be variably adjusted between 85 and 95 and can be used in syetrical and asyetrical trunking. Internal corner LFS GKH-I7070RW Pure white PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene kg/00. 00, Internal corner made of halogen-free PC/ABS for changing the direction of the GK device installation trunking. T piece GKH-T7070RW Pure white kg/00. 96, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene T piece made of halogen-free PC/ABS for changing the direction of the GKH device installation trunking. End piece kg/00. GKH-E7070RW Pure white 4, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene End piece made of halogen-free PC/ABS for closing the GKH device installation trunking. Partition m kg/00 m GKH-TW70 Pure white , PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene /m Partition made of halogen-free PC/ABS for mounting in Rapid 80 GKH (GA) device installation trunking or ISS service poles for installing cables of different voltage levels. Trunking clamp KL80A PA Polyamide OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 Trunking clamp for holding cables securely and for fastening the partition in Rapid 80 GK, GS and GA device installation trunking systems as well as in ISS service poles with a 76.5 system opening. 36

137 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 37

138 38 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206

139 EGS product innovations USB charging device 40 Socket 0, Italy, single 4 Deskbox DBK 42 Positioner for VH power supply units 44 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 39

140 Multimedia connection solutions, Modul 45 USB charging device MTG-2UC.2 RW MTG-2UC.2 SWGR MTG-2UC.2 AL Pure white Black-grey Aluminium painted kg/00. 5,500 5,500 5, PC Polycarbonate USB charging device with two USB type A sockets, for charging 2 mobile devices, maximum charging current x,200 ma or 2x 600 ma. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 EGS 45 40

141 International sockets Modul 45 STD-IT0 RW0.5 Pure white kg/00. 2,600 PC Polycarbonate Socket, single 0, Italy P7/, with increased touch protection, with screw terminals, 2-pin, 6 A, 250 V~. Socket 0, Italy, single OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 EGS 4

142 DBK - ready-for-connection Deskbox, foldable Deskbox DBK, 3 sockets DBK2-E3 D3S kg/00. 33, V2A Stainless steel, grade 304 Foldable Deskbox with connection cable for fixed installation in a tabletop, housing made of brushed stainless steel with brush bar as cable outlet. It is mounted using a 95 x 57 installation opening in the tabletop. Equipment: - Three black protective contact sockets in 60 connection direction, incl. 3.0 m power cable with angular connector CEE 7/7. Note: Can be used in tabletops of up to 50 thickness. Deskbox DBK, 4 sockets DBK2-D3 D2S2K V2A Stainless steel, grade 304 kg/00. 78, Foldable Deskbox with connection cable for fixed installation in a tabletop, housing made of brushed stainless steel with brush bar as cable outlet. It is mounted using a 95 x 57 installation opening in the tabletop. Equipment: - Two black protective contact sockets in 60 connection direction, incl. 3.0 m power cable with angular connector CEE 7/7. - Two data technology couplings RJ45 to RJ45, : switched, Cat. 6 shielded. Note: Can be used in tabletops of up to 50 thickness. Deskbox DBK, 2 sockets, 2x RJ45 Cat. 6 DBK2-E4 D4S V2A Stainless steel, grade 304 kg/00. 63, Foldable Deskbox with connection cable for fixed installation in a tabletop, housing made of brushed stainless steel with brush bar as cable outlet. It is mounted using a 245 x 57 installation opening in the tabletop. Equipment: - Four black protective contact sockets in 60 connection direction, incl. 3.0 m power cable with angular connector CEE 7/7. Note: Can be used in tabletops of up to 50 thickness. EGS Deskbox DBK, 3 sockets, 2x RJ45 Cat. 6 DBK2-D4 D3S2K V2A Stainless steel, grade 304 kg/00. 63, Foldable Deskbox with connection cable for fixed installation in a tabletop, housing made of brushed stainless steel with brush bar as cable outlet. It is mounted using a 245 x 57 installation opening in the tabletop. Equipment: - Three black protective contact sockets in 60 connection direction, incl. 3.0 m power cable with angular connector CEE 7/7. - Two data technology couplings RJ45 to RJ45, : switched, Cat. 6 shielded. Note: Can be used in tabletops of up to 50 thickness. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 42

143 DBK - ready-for-connection Deskbox, foldable DBK2-M5V D3S2K Deskbox DBK, 3 sockets, VGA, mini jack, 2x RJ45 Cat. 6 kg/ , V2A Stainless steel, grade 304 Foldable Deskbox with connection cable for fixed installation in a tabletop, housing made of brushed stainless steel with brush bar as cable outlet. It is mounted using a 295 x 57 installation opening in the tabletop. Equipment: - Three black protective contact sockets in 60 connection direction, incl. 3.0 m power cable with angular connector CEE 7/7. - One VGA 5-pin HDD socket, incl. 3.0 m connection cable with connector. - One audio jack socket 3.5, incl. 3.0 m connection cable with connector. - Two data technology couplings RJ45 to RJ45, : switched, Cat. 6 shielded. Note: Can be used in tabletops of up to 50 thickness. DBK2-M4H D2S2K V2A Stainless steel, grade 304 Deskbox DBK, 2 sockets, HDMI, 2x RJ45 Cat. 6 kg/00. 73, Foldable Deskbox with connection cable for fixed installation in a tabletop, housing made of brushed stainless steel with brush bar as cable outlet. It is mounted using a 245 x 57 installation opening in the tabletop. Equipment: - Two black protective contact sockets in 60 connection direction, incl. 3.0 m power cable with angular connector CEE 7/7. - One HDMI.3 socket, including 3.0 m connection cable with connector. - Two data technology couplings RJ45 to RJ45, : switched, Cat. 6 shielded. Note: Can be used in tabletops of up to 50 thickness. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 EGS 43

144 Power supply units Positioner for VH power supply units VH-POS Orange kg/00. 80, Positioner for variable height adjustment of a VH power supply unit, support load between 0.5 and 6.0 kg, maximum cable draw-out.5 m. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 EGS 44

145 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 45

146 46 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206

147 UFS product innovations GES service outlets for dry-cleaned floors 50 Universal support UT3 and cover plates 54 Universal support UT4 and cover plates 56 Accessories for universal supports UT3 and UT4 58 Screed box and installation socket for GES R2 62 Mounting plates 63 Metal hinged lid for GES R2 floor socket 64 Tube body for floor socket GES R2 65 Blanking lid for floor socket GES R2 66 Plastic lid for floor socket GES R OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 47

148 GES service outlets Service outlets supply workstations and other areas in the centre of the room with power and data connections via the floor. There are versions for dry and wetcare floors. Service outlets are suitable for installation in screed-flush and screed-covered underfloor systems, as well as in system floors. UFS 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 48

149 Various colours, shapes and sizes The GES service outlets are available in round and rectangular versions. Plastic or metal are used as materials. The plastic version is the tried-and-trusted solution for office installations. It is available in three colour variants. The metallic stainless steel or aluminium versions look refined and can carry an even greater load. Other solutions are available for areas with increased floor load requirements. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 UFS 49

150 GES service outlets for dry-cleaned floors GES9-3B service outlet with handle clamp GES9-3B U 70 GES9-3B U 90 GES9-3B U 09 Iron grey Graphite black Grey-beige kg/ , , , PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Up to 9 installation devices with 50 central plate can be inserted. Service outlet with handle clamp for up to 2 individual Modul 45 devices in 3 UT4 universal supports, use in underfloor trunking systems and system floors. Floor covering recess in the hinged lid pre-adjusted to 5, if necessary adjustable to 0. GES9-3S service outlet with locking slider GES9-3S U 70 GES9-3S U 90 GES9-3S U 09 Iron grey Graphite black Grey-beige kg/00. 99,500 99,500 99, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Up to 9 installation devices with 50 central plate can be inserted. Service outlet with locking slider for up to 2 individual Modul 45 devices in 3 UT4 universal supports, use in underfloor trunking systems and system floors. Floor covering recess in the hinged lid pre-adjusted to 5, if necessary adjustable to 0. UFS 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 50

151 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 5

152 Solutions for device installation The Ackermann made by OBO installation systems offer a wide range of options for device installation in service outlets and cassettes with a locking ladder. Power, data and multimedia connections can be combined as required and positioned at various heights in the locking ladder. Four solutions are available for device installation: Universal support UT3 and UT4 for the installation of Modul 45 devices and standard installation devices with 50 central plate MTU mounting support for the integration of data and multimedia technology of various manufacturers MT45V module support for vertical installation of Modul 45 devices GT device support for the installation of CEE connection units UFS Universal support 52 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206

153 Module support CEE installation 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 Vertical installation UFS 53

154 Universal support UT3 and cover plates Universal support UT3, system length 65 UT3 PA Polyamide Universal support with two strain reliefs for electrical installation in device installation units of nominal sizes 2, R4, 4, 6 and R7. Cover plates should be ordered separately. Universal support UT3, system length 65 UT PA Polyamide Universal support with two strain reliefs, partition and UT 3 P3 cover plate for installation of 3 Modul 45 devices in device installation units of nominal sizes 2, R4, 4, 6 and R7. Cover plate for universal support UT3, blank UT3 P0 PA Polyamide Cover plate, blank, for closing off unused installation space of the UT3 universal support. Plate can be reduced to 6 are required. Cover plate for universal support UT3, blank UT34 P0 PA Polyamide Cover plate, blank, for closing off unused installation space of the UT3 and UT4 universal support. Plate can be reduced to 6 as required. Cover plate for universal support UT3, Modul 45 installation opening UT34 P PA Polyamide Cover plate for the installation of Modul UFS Cover plate for universal support UT3, Modul 45 installation opening UT3 P PA Polyamide Cover plate for the installation of Modul OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 54

155 Universal support UT3 and cover plates Cover plate for universal support UT3, Modul 45 installation opening UT34 P2 PA Polyamide Cover plate for the installation of 2 Modul Cover plate for universal support UT3, Modul 45 installation opening UT3 P3 PA Polyamide Cover plate for the installation of 3 Modul Cover plate for universal support UT3, round installation opening for EKR device UT3 D PA Polyamide Cover plate for the installation of installation device with 50 central plate Cover plate for universal support UT3, with installation opening for EKR device, with screw fastening UT34 D2 PA Polyamide Cover plate for the installation of installation device with 50 central plate OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 UFS 55

156 Universal support UT4 and cover plates Universal support UT4, system length 208 UT4 PA Polyamide Universal support with two strain reliefs for electrical installation in device installation units of nominal sizes R7, R9 and 9. Cover plates should be ordered separately. Universal support UT4, system length 208 UT PA Polyamide Universal support with two strain reliefs, partition and UT 4 P4 cover plate for installation of 4 Modul 45 devices in device installation units of nominal sizes R7, R9 and 9. Universal support with two strain reliefs, partition and UT 4 P4 cover plate for installation of 4 Modul 45 devices in OKB IT device supports. Cover plate for universal support UT4, blank UT34 P0 PA Polyamide Cover plate, blank, for closing off unused installation space of the UT3 and UT4 universal support. Plate can be reduced to 6 as required. Cover plate for universal support UT4, Modul 45 installation opening UT34 P PA Polyamide Cover plate for the installation of Modul Cover plate for universal support UT4, Modul 45 installation opening UT34 P2 PA Polyamide Cover plate for the installation of 2 Modul UFS Cover plate for universal support UT4, Modul 45 installation opening UT4 P3 PA Polyamide Cover plate for the installation of 3 Modul OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 56

157 Universal support UT4 and cover plates Cover plate for universal support UT4, Modul 45 installation opening UT4 P4 PA Polyamide Cover plate for the installation of 4 Modul Cover plate for universal support UT4, round installation opening for EKR device UT34 D PA Polyamide Cover plate for the installation of installation device with 50 central plate Cover plate for universal support UT4, with installation opening for EKR device, with screw fastening UT34 D2 PA Polyamide Cover plate for the installation of installation device with 50 central plate Cover plate for universal support UT4, with installation openings for 3 EKR devices UT4 D3 PA Polyamide Cover plate for the installation of 3 installation devices with 50 central plate OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 UFS 57

158 Accessories for universal supports UT3 and UT4 Partition UT34 TW PA Polyamide Partition for universal support to separate current types and circuits. Mounting bridge UT34 T PA Polyamide Strain relief for data technology UT ZE St Steel FS Strip-galvanised For mounting on UT3 and UT4 universal supports when using Modul 45 data technology as strain relief of data connection cables UFS 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 58

159 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 59

160 Modular structure The GES R2 floor sockets offer the tried-and-trusted functions of the Ackermann made by OBO underfloor systems now newly constructed and with an up to 00% larger installation compartment compared to the predecessor model GESRM2. This provides space for a double socket of the Modul 45 series and up to two data modules. The modular structure as a screed socket, installation socket and service outlet allows simple configuration, according to the area of application. Cover variants The classic service outlet for the GES R2 floor socket is available in various designs. Installation box The installation socket is available empty or pre-equipped. The preequipped variant contains either a double socket or a free combination of two Modul 45 individual devices. UFS Screed box The height-adjustable screed socket is used to accept the service outlet when the GES R2 floor socket is installed in the screed OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206

161 Areas of application OBO GES R2 floor sockets are an ideal underfloor solution, when a discreet appearance, a high load capacity and varied functionality are required. Whether in the living room or in public areas such as foyers, shopping malls or exhibition areas the floor sockets stand out through their fine design and also add value to high-quality floor areas. The installation socket of the GES R2 floor sockets is pre-equipped with two sockets. To the side of the socket, there is space for up to two connection sockets for data technology applications, as an option. The floor sockets of the GES R2 series are available in various materials. The die-cast zinc variant is available surface-treated in the shades nickel, chrome, old copper and old brass. Ideally suited to wet-cleaned floors 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 Withstands the highest loads In use around the world for decades 6 UFS

162 Screed box and installation socket for GES R2 Screed box for GES R2 UD GES R2 St Steel FS Strip-galvanised Height-adjustable screed socket for the installation of the installation socket of the GES R2 floor socket. With 2x2 pre-marked entry openings for installation pipes (M20/M25). Installation box, double, VDE MT R2 VDE PA Polyamide Installation socket for GES R2 floor socket for mounting in UD GES R2 screed box and in raised floor plates. The scope of delivery contains a double protective contact socket (VDE). Up to two modular data sockets (Keystones) can be installed with optional mounting plate. Installation box, double, NF MT R2 NF PA Polyamide Installation socket for GES R2 floor socket for mounting in UD GES R2 screed box and in raised floor plates. The scope of delivery contains a double socket (NF). Up to two modular data sockets (Keystones) can be installed with optional mounting plate. Installation socket, + empty MT R2 - PA Polyamide Installation socket for GES R2 floor socket for mounting in UD GES R2 screed box and in raised floor plates. The scope of supply contains a partition and two cover plates for the installation of individual Modul 45 devices. Up to two modular data sockets (Keystones) can be installed with optional mounting plate. UFS 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 62

163 Mounting plates MP R2 2A V2A Stainless steel, grade 304 Mounting plate for data technology, type A Mounting plate to accept two data connection modules of the following types: AMP TYCO: Standard 0Connect, SL series 0Connect and Toolless, AMP-Twist; Brand-Rex: unshielded; GG45; TKM RJ MOD; Nexans: LANmark with Adapter-Clip; Siemon CAT6; 3M K6 and K0. Dimensions of a mounting opening in : 20.0 x MP R2 2B V2A Stainless steel, grade 304 Mounting plate for data technology, type B Mounting plate to accept two connection modules for data connection modules of the following types BTR: E-DAT; Dätwyler: MS and MS-N; Kerpen: VarioKeystone. Dimensions of a mounting opening in : 9.35/2.55 x MP R2 2C V2A Stainless steel, grade 304 Mounting plate for data technology, type C Mounting plate to accept two data connection modules of the following types: Brand-Rex: shielded; EKU: E-Stone; Dätwyler: KS-T, MS-K and KU-T module; R&M: Snap-In and Keystone; Rutenbeck: UM and UMflex; SETEC: MKJ, UKJ and XKJ; Siemon TERA; Telegärtner: AMJ and UMJ. Dimensions of a mounting opening in : 9.30 x 4.80.a MP R2 2F V2A Stainless steel, grade 304 Mounting plate for data technology, type F Mounting plate to accept two data connection modules, type Avaya/Systimax: M series. Dimensions of a mounting opening in : 7.40 x MP 2R LE V2A Stainless steel, grade 304 Mounting plate for data technology, type LE Mounting support to accept two data connection modules of the following types: LexCom 25 and 250. Dimensions of a mounting opening in : 8.30 x OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 UFS 63

164 Metal hinged lid for GES R2 floor socket Hinged lid with locking slider for GES R2 floor socket for direct installation in the MT R2 installation socket. When closed, the floor socket fulfils the requirement of EN for wet-cleaned floors. Hinged lid with locking slider GES R2 Ni Zn Die-cast zinc N Nickel-plated Hinged lid with locking slider for GES R2 floor socket for direct installation in the MT R2 installation socket. When closed, the floor socket can be wet-cleaned. Hinged lid with locking slider GES R2 CuZn Zn Die-cast zinc CuZn Brass-coated Hinged lid with locking slider for GES R2 floor socket for direct installation in the MT R2 installation socket. When closed, the floor socket can be wet-cleaned. Hinged lid with locking slider GES R2 Cu Zn Die-cast zinc Cu Copper-plated Hinged lid with locking slider for GES R2 floor socket for direct installation in the MT R2 installation socket. When closed, the floor socket can be wet-cleaned. UFS Hinged lid with locking slider GES R2 Cr Zn Die-cast zinc CR Chrome-plated Hinged lid with locking slider for GES R2 floor socket for direct installation in the MT R2 installation socket. When closed, the floor socket can be wet-cleaned. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 64

165 Tube body for floor socket GES R2 Tube body with handle clamp for GES R2 floor socket for direct installation in the MT R2 installation socket. The tube body fulfils the requirements of EN for wet-cleaned floors, also when opened. GES R2T Cr Zn Die-cast zinc CR Chrome-plated Tube body with handle clamp Tube body with handle clamp for GES R2 floor socket for direct installation in the MT R2 installation socket. The tube body fulfils the requirements of EN for wet-cleaned floors, also when opened. GES R2T Cu Zn Die-cast zinc Cu Copper-plated Tube body with handle clamp Tube body with handle clamp for GES R2 floor socket for direct installation in the MT R2 installation socket. The tube body fulfils the requirements of EN for wet-cleaned floors, also when opened. Tube body with handle clamp 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 GES R2T CuZn Zn Die-cast zinc CuZn Brass-coated Tube body with handle clamp for GES R2 floor socket for direct installation in the MT R2 installation socket. The tube body fulfils the requirements of EN for wet-cleaned floors, also when opened. GES R2T Ni Zn Die-cast zinc N Nickel-plated Tube body with handle clamp Tube body with handle clamp for GES R2 floor socket for direct installation in the MT R2 installation socket. The tube body fulfils the requirements of EN for wet-cleaned floors, also when opened. UFS 65

166 Blanking lid for floor socket GES R2 Blanking lid with Allen screw with locking slider for GES R2 floor socket for direct installation in the MT R2 installation socket. The lid exit can be used as a cable outlet. When closed, the floor socket fulfils the requirement of EN for wet-cleaned floors. Service outlet, blank, with Allen GES R2B Ni Zn Die-cast zinc N Nickel-plated Blanking lid with Allen screw with locking slider for GES R2 floor socket for direct installation in the MT R2 installation socket. The lid exit can be used as a cable outlet. When closed, the floor socket can be wet-cleaned. Service outlet, blank, with Allen GES R2B CuZn Zn Die-cast zinc CuZn Brass-coated Blanking lid with Allen screw with locking slider for GES R2 floor socket for direct installation in the MT R2 installation socket. The lid exit can be used as a cable outlet. When closed, the floor socket can be wet-cleaned. Service outlet, blank, with Allen UFS GES R2B Cu Zn Die-cast zinc Cu Copper-plated Blanking lid with Allen screw with locking slider for GES R2 floor socket for direct installation in the MT R2 installation socket. The lid exit can be used as a cable outlet. When closed, the floor socket can be wet-cleaned. Service outlet, blank, with Allen GES R2B Cr Zn Die-cast zinc CR Chrome-plated Blanking lid with Allen screw with locking slider for GES R2 floor socket for direct installation in the MT R2 installation socket. The lid exit can be used as a cable outlet. When closed, the floor socket can be wet-cleaned. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 66

167 Plastic lid for floor socket GES R2 Hinged lid with cord outlet for GES R2 floor socket for direct installation in the MT R2 installation socket. For use in dry-cleaned floors. GES R2 90 PA Polyamide Hinged lid with cord outlet Hinged lid with cord outlet for GES R2 floor socket for direct installation in the MT R2 installation socket. For use in dry-cleaned floors. GES R2 70 PA Polyamide Hinged lid with cord outlet Hinged lid with cord outlet for GES R2 floor socket for direct installation in the MT R2 installation socket. For use in dry-cleaned floors. GES R2B 70 PA Polyamide Service outlet, blank, without floor covering recess Blanking lid with cord outlet for GES R2 floor socket for direct installation in the MT R2 installation socket. For use in dry-cleaned floors. 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206 GES R2B 90 PA Polyamide Service outlet, blank, without floor covering recess Blanking lid with cord outlet for GES R2 floor socket for direct installation in the MT R2 installation socket. For use in dry-cleaned floors. UFS 67

168 68 4 OBO Neuheiten 206 / en / 0/03/206 (LLExport_04360) / 0/03/206