RCN152-L, RCN150-L Room Controller

Transcription

1 Issue Datasheet EN Room Controller pplication The is a room controller for stand-alone use or use in a LON network. For direct communication with other LON components, the is equipped with an integrated LON FTT10 interface. The room controller RCN152-L, RCN150-L can be expanded with operating modules. The room controller conforms to LON Works standard 2.0. This means that no additional costs are incurred for LON Works Credits during commissioning. Content Page Important Information Regarding Product Safety...2 Item...3 Technical Data...3 Compatibility... ccessories (not included in delivery)... Dimensions... Connection...5 Connection examples...6 Mounting...8 Removal...9 Network Installation...10 Änderungen vorbehalten - Contents subject to change - Sous réserve de modifications - Reservado el derecho a modificación - Wijzigingen voorbehouden - Con riserva di modifiche - Innehåll som skall ändras - Změny vyhrazeny - Zmiany zastrzeżone - Возможны изменения változtatások jogát fenntartjuk - ᵚ㓿䙊 㘼 Ⲵᵳ Kieback&Peter GmbH & Co. KG Tempelhofer Weg 50, 1237 Berlin/Germany Telefon: , Telefax: info@kieback-peter.com

2 Datasheet EN Issue Important Information Regarding Product Safety Safety Instructions This data sheet contains information on installing and commissioning the product "RCN152-L, RCN150-L". Each person who carries out work on this product must have read and understood this data sheet. If you have any questions that are not resolved by this data sheet, you can obtain further information from the supplier or manufacturer. If the product is not used in accordance with this data sheet, the protection provided will be impaired. pplicable regulations must be observed when installing and using the device. Within the EU, these include regulations regarding occupational safety and accident prevention as well as those from the VDE (ssociation for Electrical, Electronic & Information Technologies). If the device is used in other countries, it is the responsibility of the system installer or operator to comply with local regulations. Mounting, installation and commissioning work on the devices may only be carried out by qualified technicians. Qualified technicians are persons who are familiar with the described product and who can assess given tasks and recognize possible dangers due to technical training, knowledge and experience as well as knowledge of the appropriate regulations. Legend WRNING Indicates a hazard of medium risk which can result in death or severe bodily injury if it is not avoided. CUTION Indicates a hazard of low risk which can result in minor or medium bodily injury if it is not avoided.! CUTION Indicates a hazard of medium risk which can result in material damage or malfunctions if it is not avoided. NOTE Indicates additional information that can simplify the work with the product for you. Notes on Disposal For disposal, the product is considered waste from electrical and electronic equipment (electronic waste) and must not be disposed of as household waste. Special treatment for specific components may be legally binding or ecologically sensible. The local and currently applicable legislation must be observed. Page 2 / 10

3 Issue Datasheet EN Item RCN152-L RCN150-L Room controller with 6 inputs and 10 outputs Room controller with 6 inputs and outputs Technical Data Nominal voltage C 110 to 230 V ± 10 %; 50 to 60 Hz; 23 V (consumption <1 W) starting current: 50 / 230 V C; 1 ms Inputs 6 configurable inputs 2x KP10 or binary inputs P1, P2 2x NTC10K or binary inputs P3, P 2x 0 to 10 V or binary inputs P5, P6 Outputs RCN150-L: 2 BO: PWM output or 3-point actuator; K1, K2; DC 2 V (Σ 00 m) or 2 O: 0 to 10 V ; max. 2.5 m; Y1-Y2 e.g. 2x 1 W small thermoactuator DC 2 V; ST005/80 1 BO: PWM output; K3; DC 2 V (Σ 00 m) or 1 O: 0 to 10 V; max. 2.5 m; Y3 1 BO: 1 binary output, floating relay contact K10; C 230 V (2 KW) / C 2 V, 10 ; Inrush 80 RCN152-L: BO: PWM output or 3-point actuator; K1, K2, K3, K; DC 2 V (Σ 00 m) or O: 0 to 10 V; max. 2.5 m; DC 2 V power supply Σ 2W; Y1-Y e.g. x 1 W small thermoactuator DC 2 V; ST005/80 3 BO: relay contact C 230 V; 3 ; K7, K8, K9 2 B: relay contact C 230 V; 3 ; K5, K6 1 BO: 1 binary output, floating relay contact K10; C 230 V (2 KW) / C 2 V, 10 ; Inrush 80 Indicators and controls Green LED: Operation Red LED: LON status Push-button: LON Service Pin Interfaces LON FTT-10/FTT kbit/s plug-in screw terminal CN bus for operator panels; screw terminals and RJ9 (50m maximum) Overvoltage category III Level of contamination 2 Rated impulse withstand 000 V voltage Mode of operation Type 1 Housing Plastic; RL 9010 Protection class This device is intended for installation in a wall-mounted enclosure or switch cabinet with protection class I or II. Degree of protection IP20 mbient temperature 0 C to 50 C mbient humidity During operation: 20 to 80% relative humidity; non-condensing Out of operation: 5 to 90 % relative humidity; non-condensing Page 3 / 10

4 Datasheet EN Issue Installation Mounting rail TH Weight 0.3 kg Dimensions 13.5 x 90 x 60 (WxHxD in mm) Sensor types Type Value range and unit 0 to 10 V 0 to 100 % KP10-0 to 60 C NTC10K (NTC10K31) -0 to 60 C NTC10K (FCD; NTC103T-2,3) -0 to 60 C Resistor (potentiometer) 0 to 10 kω Compatibility Room control module RBW20x-C, RBW30x-C ccessories (not included in delivery) Z178 Connection line: room control module and room controller (10 m) Z178/2 dapter: RJ9 plug - terminal block, -pole (15 cm) HW HW Z180 Solid state relay input voltage 18 to 36 V C/DC Empty housing for wall mounting (8TE/IP30) Housing for wall mounting Installation space: one row, 32 mm (18 HP); 1 Dimensions 90,0,7 13,5 60,0 Page / 10

5 Issue Datasheet EN Connection RCN152-L Y K Y3 K3 2V~/ 10 K10 2V~/ 3 (2 ) K7 K8 K9 2V~/ 3 (2 ) K5 K6 N L Y1 K1 Y2 K P5 P6 P1 P2 P3 P 0..1 KP10 NTC10K RCN150-L B LON +12V= C+ C CN RJ Y3 K3 2V~/ 10 K10 N L Y1 K1 Y2 K P5 P6 P1 P2 P3 P 0..1 KP10 NTC10K B LON +12V= C+ C CN RJ Inputs P5, P6 I: V or BE: Binary (floating) P1, P2 I: KP10 or BE: Binary (floating) P3, P I: NTC10K or potentiometer 10 kω or BE: Binary (floating) Outputs Use either K1..K or Y1..Y respectively at the specified connection. K1, K2; Y1, Y2 BO: Thermo actuator or 3-point actuator; max. C 230 V, 00 m O: V, valve or damper control; maximum 2.5 m; DC 2 V, 1 W power supply Σ 2W K3, K; BO: Thermo actuator or 3-point actuator; max. C 230 V, 00 m (K not used with RCN 150-L) Y3, Y O: V, valve or damper control; maximum 2.5 m; DC 2 V power supply Σ 2W (Y not used with RCN150-L) K10 BO: Electric heating or light; max. C 230 V, 10, switch-on current max. 0 (corresponds to 2 typical conventional ballasts for fluorescent lamps) K7..K9 BO: Maximum 3-level fan or blinds; max. C 230 V, 3 (not used with RCN150-L) K5, K6 BO: Blinds or 3-point actuator; max. C 230 V, 3 (not used with RCN150-L) Page 5 / 10

6 M M M Datasheet EN Issue Connection examples RCN150-L - 2x PWM actuator DC 2 V - Ventilation damper DC 2 V 0..1 Y3 2V~/ 10 K10 N L K1 Y1 M K2 Y P5 P6 P1 P2 P3 P 0..1 KP10 NTC10K B LON +12V= C+ C CN RJ PWM PWM RCN152-L - 2x analog actuator DC 2 V - nalog fan / multi-level fan C 230 V - Ventilation damper DC 2 V M M N L1 St Y Y3 K10 K7 K8 K9 K5 K Y1 Y P5 P6 P1 P2 P3 P 0..1 KP10 NTC10K B LON +12V= C+ C CN RJ NOTE connection of blinds is only possible with the software version 1.60 or higher. Page 6 / 10

7 Issue Datasheet EN Sensors Y1 Y TDF1 KP Y1 Y2 0,8W H% HTF12 KP10 10 NOTE connection of the potentiometer is only possible at the entrances P3 or P, at terminals "33", "3" and "3", "35" and with the software version 1.60 or higher. Page 7 / 10

8 Datasheet EN Issue Mounting WRNING Danger of death by electrocution. Mount or remove only when power is switched off. TH Page 8 / 10

9 Issue Datasheet EN Removal WRNING Danger of death by electrocution. Mount or remove only when power is switched off Page 9 / 10

10 Datasheet EN Issue Network Installation When commissioning a room controller in the "LonMaker Integration Tool", the unique Neuron ID of a real room controller is defined for a device in the drawing. You can find the Neuron ID in text form and as a barcode on the type plate and on the supplied configuration labels. You have the following options for entering the Neuron ID in the "LonMaker Integration Tool": Manually: Enter the Neuron ID using the computer keyboard. Barcode: Scan the Neuron ID using a barcode scanner. Online: Receive the Neuron ID via the LON network. The computer with the network management tool must be connected to the LON network. The Neuron ID is transmitted when the service pin is entered on the room controller or when a magnet is used on a connected operator panel Service Pin 2 Service LED Meanings of the "Service LED" (2) Red-green LED flashing: "Service Pin" (1) pressed Red LED flashing: Not commissioned Green LED: Commissioned Online installation on the room control module RBW20x-C or RBW30x-C: The technolon room controller can also be identified quickly and easily directly on the room control module using a magnet (3). magnet (3) is guided along the right side of room control module RBW20x-C or RBW30x-C. Internally, this triggers the service PIN in the RCN room controller. To verify this, a service LED () on the top part of the housing on the room control modules lights up green. 3 3 RBW205-C RBW305-C Page 10 / 10