SENSORE PIR LUCE NOTTURNA VPIRS0001W VLUNT0001W SENSORE PIR

Transcription

1 CTLOGO 2017

2 SENSORE PIR SENSORE PIR Sensore di movimento a infrarossi con raggio d'azione di 12mt e timer 8sec - 7min. Infrared movement sensor with 12m action range and timer working from 8sec. to 12min. IP44 230Vac Confezione/Packaging: Scatola/Box Code VPIRS0001W Finishing Bianco White 1000W Plastica Plastic pparecchio installabile a parete esterna Outdoor wall light appliance Tipo di connessione: Morsetti Type of connection: Screw terminal Installabile su superfici infiammabili Can be installed on flammable surfaces LUCE NOTTURN LUCE NOTTURN Luce notturna a LED da parete con spina 10 incorporata, disponibile con interruttore per accensione/spegnimento. LED wall night light equipped with 10 plug. vailable with on/off switch. 230Vac 0,5W 20lm Confezione/Packaging: Scatola/Box Code VLUNT0001W Finishing Bianco White 1 power LED Classe II Tipo di connessione: Spina Type of connection: Plug Plastica Plastic pparecchio installabile a parete Device fixable on walls Installabile su superfici infiammabili Can be installed on flammable surfaces

3 SPIN INTERRUTTORE TERR SPIN INTERRUTTORE TERR Spina 10 dotata di cavo 2 x 0,75mm 2 e interruttore a terra on/off. 10 plug equipped with 2 x 0,75mm 2 wire and ground on/off switch. Confezione/Packaging: Sfuso/Without packaging Code VSPIT0001X VSPIT0001W VSPIT0001N Finishing Plex Bianco White Nero Black Termoplastica Thermoplastic Tipo di connessione: Cavo Type of connection: Cable Installabile su superfici infiammabili Can be installed on flammable surfaces SPIN CON CVO SPIN CON CVO Spina 10 dotata di cavo 2 x 0,75mm plug equipped with 2 x 0.75mm 2 wire. Confezione/Packaging: Sfuso/Without packaging Code VSPIC0001X VSPIC0001W VSPIC0001N Finishing Plex Bianco White Nero Black Termoplastica Thermoplastic Tipo di connessione: Cavo Type of connection: Cable Installabile su superfici infiammabili Can be installed on flammable surfaces SPIN CON INTERRUTTORE SPIN CON INTERRUTTORE Spina 10 dotata di cavo 2 x 0,75mm 2 e interruttore on/off. 10 plug equipped with 2 x 0,75mm 2 wire and on/off switch. Confezione/Packaging: Sfuso/Without packaging Code VSPIN0001X VSPIN0001W VSPIN0001N Finishing Plex Bianco White Nero Black Termoplastica Thermoplastic Tipo di connessione: Cavo Type of connection: Cable Installabile su superfici infiammabili Can be installed on flammable surfaces

4 CTR002 CTR002 Centralina RGB in tensione, con telecomando a radiofrequenza. Voltage RGB LED controller with RF (radio-frequency) remote control. Funzioni/Functions 15 livelli di luminosità/15 levels of brightness ccensione e spegnimento, mantiene in memoria l'ultima funzione utilizzata/switch on and switch off, memorizes the last function used Modalità luce bianca o colorata White or colored light-modality Modalità cambiamento colore della luce mediante anello colorato sul radiocomando/changing light-color through a colored ring on remote control Distanza di ricezione radiocomando < 20 metri Receiving-distance of remote control < 20 meters 144W Confezione/Packaging: Sacchetto/Bag Code Peak output current (each channel) Color CTR002 4 RGB Classe III I Tipo di connessione: Cavo Type of connection: Cable Installabile su superfici infiammabili Can be installed on flammable surfaces CTR010 CTR010 Dimmer LED Controller with RF (radio-frequency) remote control. Dimmer LED Controller with RF (radio-frequency) remote control. Funzioni/Functions Variazione della luminosità/variation of brightness Regolazione dell intensità luminosa/regulation of light intensity ccensione e spegnimento, mantiene in memoria l'ultima funzione utilizzata/switch on and switch off, memorizes the last function used Preset di luminosità: alta, media e bassa Brightness preset: high, medium, low Distanza di ricezione radiocomando < 20 metri Receiving-distance of remote control < 20 meters 72W Confezione/Packaging: Sacchetto/Bag Code Peak output current (each channel) Color CTR010 6 DIMMER Classe III I Tipo di connessione: Cavo Type of connection: Cable Installabile su superfici infiammabili Can be installed on flammable surfaces

5 CTR001 CTR001 Centralina RGB in tensione, con telecomando infrarossi. Voltage RGB LED controller with infrared. Funzioni/Functions Controllo cromatico del colore/chromatic control of the color 13 Livelli di luminosità/13 levels of brightness ccensione e spegnimento, mantiene in memoria l ultima funzione utilizzata/switch on and switch off, memorizes the last function used 16 colori prememorizzati selezionabili tramite telecomando 16 pre-memorized different colors selectable using the remote control 4 modalità di cambio luce prememorizzati: Flash, Strobe (solo luce bianca), Fade e Smooth/4 pre-memorized different procedures of color-changing: Flash, Strobe (white light only), Fade, Smooth Distanza di ricezione telecomando >10 metri Receiving-distance of remote control >10 meters Confezione/Packaging: Scatola/Box Code Peak output current (each channel) Color CTR001 2,5 RGB 90W Classe III I Tipo di connessione: Connettore Type of connection: Connector Installabile su superfici infiammabili Can be installed on flammable surfaces CTR100 CTR100 Centralina RGB in tensione, con telecomando a radiofrequenza. Voltage RGB LED controller with RF (radio-frequency) remote control. Funzioni/Functions 15 livelli di luminosità/15 levels of brightness ccensione e spegnimento, mantiene in memoria l ultima funzione utilizzata/switch on and switch off, memorizes the ast function used Modalità luce bianca o colorata White or colored light-modality Modalità cambiamento colore della luce mediante Changing light-color through a colored ring on remote control anello colorato sul Radiocomando Distanza di ricezione radiocomando 20 metri Receiving-distance of remote control 20 meters / Confezione/Packaging: Blister Code Peak output current (each channel) Color CTR100 5 RGB 180/360W Classe III I Tipo di connessione: Morsetti Type of connection: Screw terminal Installabile su superfici infiammabili Can be installed on flammable surfaces

6 MP103 MP103 mplificatore a tre canali o RGB. Three channels or RGB amplifier. Funzioni/Functions Collegamento multiplo da 10mt di strip LED monocolore o RGB Multiple connection from 10m for singol color or RGB LED strip Ripetitore di segnale RGB/RGB signal-repeater Morsettiera fissa/fixed terminal board Fissaggio a parete/wall fastening 5Vdc/36Vdc Confezione/Packaging: Scatola/Box Code MP103 Peak output current (each channel) 6 90/648W Classe III I Tipo di connessione: Morsetti Type of connection: Screw terminal Installabile su superfici infiammabili Can be installed on flammable surfaces

7 serie DT COSTNT VOLTGE DT DT DT LT DT DT INPUT Input voltage Vac Vac Vac Vac Input current 0.75 at 235V 0.75 at 235V 1.6 at 235V Input frequency Hz Inrush current Required input fuse 2/250V 3/250V 5/250V OUTPUT Output voltage Vdc Output voltage adjustment ± xx % Output current Rated output power W 30W 60W 120W Residual ripple, switching peaks mvpp 120mV 150mV 100mV 150mV 80mV 100mV Overload protection % of rated output current +20% +20% +20% Over voltage protection V V 27-29V V 27-29V V 27-29V Hold-up time ms 100ms at 230V 100ms at 230V 100ms at 230V Control at % load (load regulation) % ±1.0% ±1.0% Parallel connection option ISOLTION TO ENCLOSURE Isolation output - earth Isolation input - earth Isolation input - output 2000Vac/1min 2000Vac/1min 2 GENERL DT Operating temperature C -15 to 50 C -15 to 50 C -15 to 50 C Storage temperature C -30 to 85 C -30 to 85 C -30 to 85 C Humidity during storage % 10-90% RH no condensing 10-90% RH no condensing 10-90% RH no condensing IP protection Efficiency % 83% 85% 82% 83% 84% Status indicator The led indicator will be red The led indicator will be red The led indicator will be red when power on when power on when power on Standards Electromagnetic compatibility EN55022 EN55024EN EN55022 EN55024 EN EN55022 EN55024 EN Class Weight kg 0.25kg 0.27kg 0.79kg pproval and marks,... SCREW CONNECTION Wire cross-section mm mm mm 2 4 mm 2 Depth x width x height mm 92x78x56 92x78x56 125x66x Se non diversamente indicato, tutti i parametri sono misurati a un carico nominale in input di 230Vac e ad una temperatura ambiente di 25 C. ll parameters NOT specially mentioned are measured at 230Vac input, rated load and 25 C of ambient temperature ,5

8 serie PT COSTNT VOLTGE PT PT PT PT PT PT INPUT Input voltage Vac Vac Vac Input current at 235V 0.16 at 235V Input frequency Hz Inrush current Required input fuse 0.22R 1/4W 1.25/250V 1.25/250V OUTPUT Output voltage Vdc Output voltage adjustment ± xx % Output current Max 0.5 Max Rated output power W 6W 15W 30W Residual ripple, switching peaks mvpp 660mV 850mV 848mV 1700mV 848mV 1700mV Overload protection % of rated output current 120% +20% +20% Over voltage protection V 12.6V 25.2V 12.6V 25.2V 13.8V 27.6V Hold-up time ms 20ms at 230V 50ms at 230V Control at % load (load regulation) % 0.05% +5% +5% Parallel connection option NO ISOLTION TO ENCLOSURE Isolation output - earth NO earth connection NO earth connection Isolation input - earth NO earth connection NO earth connection Isolation input - output GENERL DT Operating temperature C -10 to 50 C -15 to 45 C -15 to 45 C Storage temperature C -20 to 80 C Humidity during storage % 5-85% RH 5-85% RH IP protection Efficiency % 77% 79% 83% 84% 87% Status indicator Standards EN61347 EN EN EN EN Electromagnetic compatibility EN55015 EN61547 EN55015 EN55015 Class Weight kg 0.04kg 0.072kg 0.13kg pproval and marks,..., TUV, TUV SCREW CONNECTION Wire cross-section mm 2 Input: 2x Output: 2x Input: 2x Output: 2x Depth x width x height mm 60x44x23 123x45x19 153x41x

9 PT PT PT PT PT PT Vac Vac Vac 0.31 at 235V 0.37 at 235V 0.6 at 235V /250V 1.25/250V 1.25/250V W 75W 120W 848mV 1700mV 848mV 1700mV 848mV 1700mV +20% +20% +20% 12.6V 25.2V 20ms at 230V +5% 12.6V 25.2V 20ms at 230V +5% 12.6V 25.2V 20ms at 230V +5% NO earth connection NO earth connection NO earth connection NO earth connection NO earth connection NO earth connection -15 to 45 C 5-85% RH 88% EN EN EN kg, TUV -15 to 45 C 5-85% RH 88% EN EN EN kg, TUV -20 to 45 C 5-85% RH 88% EN EN EN kg, TUV Input: 2x Output: 2x x52x30 Input: 2x Output: 2x x52x30 Input: 2x Output: 2x x40x

10 serie LT COSTNT VOLTGE LT LT LT LT LT LT INPUT Input voltage Vac Input current 0.45 at 235V 0.80 at 235V 1.2 at 235V Input frequency Hz Inrush current Required input fuse 2/250V 3/250V 5/250V OUTPUT Output voltage Vdc Output voltage adjustment ± xx % Output current Rated output power W 40W 60W 100W Residual ripple, switching peaks mvpp Overload protection % of rated output current +5-50% +5-50% +5-50% Over voltage protection V Hold-up time ms 20ms at 230V 20ms at 230V 20ms at 230V Control at % load (load regulation) % 0.00% 0.00% 0.00% Parallel connection option ISOLTION TO ENCLOSURE Isolation output - earth Isolation input - earth Isolation input - output GENERL DT Operating temperature C -20 to 60 C at (no frost) -20 to 60 C at (no frost) -20 to 60 C at (no frost) Storage temperature C Humidity during storage % IP protection Efficiency % Status indicator Standards Electromagnetic compatibility EN55022 class EN :2008 EN55022 class EN :2008 EN55022 class EN :2008 Class Weight kg 0.201kg 0.333kg 0.40kg pproval and marks,... SCREW CONNECTION Wire cross-section mm mm mm mm 2 Depth x width x height mm 107x79x37 107x79x37 159x98x Se non diversamente indicato, tutti i parametri sono misurati a un carico nominale in input di 230Vac e ad una temperatura ambiente di 25 C. 2. Il rumore è rilevato ad una frequenza di 20MHz, usando un doppino da 12'' attorcigliato terminante con un condensatore in parallelo da 0.1uf a 10uf. 3. Tolleranza: include tolleranza con regolazione del potenziometro, regolazione di linea e regolazione di carico. 4. L'alimentatore è considerato come componente che verrà istallato nell'apparecchio finale. È necessario controllare che l'apparecchio finale rispetti la direttiva EMC. Per sapere come eseguire i test EMC, vi preghiamo di far riferimento ai test EMI per alimentatori Se l'alimentatore va in corto circuito senza essere sotto carico, ritornerà automaticamente in funzione non appena il corto circuito sarà rimosso (solo per LT150W)

11 LT LT LT LT LT LT LT LT at 235V 1.5 at 235V 1.5 at 235V 3.5 at 235V /250V 5/250V 5/250V 8/250V W 250W 350W 500W +5-50% +5-50% +5-50% +5-50% 20ms at 230V 20ms at 230V 20ms at 230V 20ms at 230V 0.00% 0.00% 0.00% 0.00% -20 to 60 C at (no frost) EN55022 class EN : kg to 60 C at (no frost) EN55022 class EN : kg -20 to 60 C at (no frost) EN55022 class EN : kg -20 to 60 C at (no frost) 81% EN55022 class EN : kg 4 mm 2 4 mm 2 4 mm mm 2 199x98x42 200x110x50 215x115x52 240x125x ll parameters NOT specially mentioned are measured at 220 Vac input, rated load and 25 C of ambient temperature. 2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf and 10uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that is still meets EMC directives. For gudance on how perform tahese EMC tests, please refer to "EMI testing of component power supplies". 5. If the power supply is short-circuited under no load, it will recover automatically when short-circuit is removed (only for LT150W).

12 serie LP COSTNT VOLTGE LP LP LP LP INPUT Input voltage Vac Input current Input frequency Hz Inrush current Required input fuse OUTPUT Output voltage Vdc Output voltage adjustment ± xx % Output current Rated output power W Residual ripple, switching peaks mvpp Overload protection % of rated output current Over voltage protection V Hold-up time ms Control at % load (load regulation) % Parallel connection option ISOLTION TO ENCLOSURE Isolation output - earth Isolation input - earth Isolation input - output GENERL DT Operating temperature C Storage temperature C Humidity during storage % IP protection Efficiency % Status indicator Standards Electromagnetic compatibility Class Weight kg pproval and marks,... SCREW CONNECTION Wire cross-section mm 2 Depth x width x height mm Vac 0.35 at 235V 30 2/250V W +5-50% 20ms at 230V 0.003% -20 to 60 C at (no frost) EN55022 class EN : kg 120x30x Vac 0.35 at 235V 30 2/250V W +5-50% 20ms at 230V 0.003% -20 to 60 C at (no frost) EN55022 class EN : kg 200x30x C INPUT DC OUTPUT C INPUT DC OUTPUT 1. Se non diversamente indicato, tutti i parametri sono misurati a un carico nominale in input di 230Vac e ad una temperatura ambiente di 25 C. 2. Il rumore è rilevato ad una frequenza di 20MHz, usando un doppino da 12'' attorcigliato terminante con un condensatore in parallelo da 0.1uf a 10uf. 3. Tolleranza: include tolleranza con regolazione del potenziometro, regolazione di linea e regolazione di carico.

13 LP LP LP LP LP LP Vac Vac 0.8 at 235V at 235V /250V 3.15/250V 5/250V ±20% W 61W 120W +5-50% +5-50% V V 20ms at 230V 20ms 20ms at 230V 0.003% Full load 0.5% 0.003% -20 to 60 C at (no frost) EN55022 class EN : kg -20 to 60 C at (no frost) EN55022 class EN : kg -20 to 60 C at (no frost) EN55022 class EN : kg 178x72x45 182x43x33 210x72x C INPUT DC OUTPUT C INPUT DC OUTPUT C INPUT DC OUTPUT ll parameters NOT specially mentioned are measured at 220 Vac input, rated load and 25 C of ambient temperature. 2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf and 10uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation.

14 serie LP COSTNT VOLTGE LP LP LP LP INPUT Input voltage Vac Input current Input frequency Hz Inrush current Required input fuse OUTPUT Output voltage Vdc Output voltage adjustment ± xx % Output current Rated output power W Residual ripple, switching peaks mvpp Overload protection % of rated output current Over voltage protection V Hold-up time ms Control at % load (load regulation) % Parallel connection option ISOLTION TO ENCLOSURE Isolation output - earth Isolation input - earth Isolation input - output GENERL DT Operating temperature C Storage temperature C Humidity during storage % IP protection Efficiency % Status indicator Standards Electromagnetic compatibility Class Weight kg pproval and marks,... SCREW CONNECTION Wire cross-section mm 2 Depth x width x height mm Vac 1.5 at 235V 40 5/250V W +5-50% 20ms at 230V 0.003% -20 to 60 C at (no frost) EN55022 class EN : kg 250x72x /250V ±20% W V V 20ms Full load 0.5% -20 to 60 C at (no frost) EN55022 class EN : kg 230x120x60 C INPUT DC OUTPUT C INPUT DC OUTPUT Se non diversamente indicato, tutti i parametri sono misurati a un carico nominale in input di 230Vac e ad una temperatura ambiente di 25 C. 2. Il rumore è rilevato ad una frequenza di 20MHz, usando un doppino da 12'' attorcigliato terminante con un condensatore in parallelo da 0.1uf a 10uf. 3. Tolleranza: include tolleranza con regolazione del potenziometro, regolazione di linea e regolazione di carico. 1. ll parameters NOT specially mentioned are measured at 220 Vac input, rated load and 25 C of ambient temperature. 2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf and 10uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation.

15 serie SP COSTNT VOLTGE SP SP INPUT Input voltage Vac Input current Input frequency Hz Inrush current Required input fuse OUTPUT Output voltage Vdc Output voltage adjustment ± xx % Output current Rated output power W Residual ripple, switching peaks mvpp Overload protection % of rated output current Over voltage protection V Hold-up time ms Control at % load (load regulation) % Parallel connection option ISOLTION TO ENCLOSURE Isolation output - earth Isolation input - earth Isolation input - output GENERL DT Operating temperature C Storage temperature C Humidity during storage % IP protection Efficiency % Status indicator Standards Electromagnetic compatibility Class Weight kg pproval and marks,... SCREW CONNECTION Wire cross-section mm 2 Depth x width x height mm 0.35 at 235V 50 ~ 60HZ 20 2/250V ±20% 1 12W ± 1.5% 20mS Full load 0.5% 0 to 40 C at 10-90% RH -20 to 85 C 10-90% RH IP44 : :2009+1: :2011+2:2013 EN55022:2010;EN55024:2010+1:2015; EN :2014;EN : kg 0.1mm 2 74x27x at 235V 50 ~ 60HZ 20 2/250V ±20% 2 24W ± 1.5% 20mS Full load 0.5% 0 to 40 C at 10-90% RH -20 to 85 C 10-90% RH IP44 : :2009+1: :2011+2:2013 EN55022:2010;EN55024:2010+1:2015; EN :2014;EN : kg 0.2mm 2 83x43x30 IP

16 serie C COSTNT VOLTGE C C INPUT Input voltage Vac Input current Input frequency Hz Inrush current Required input fuse OUTPUT Output voltage Vdc Output voltage adjustment ± xx % Output current Rated output power W Residual ripple, switching peaks mvpp Overload protection % of rated output current Over voltage protection V Hold-up time ms Control at % load (load regulation) % Parallel connection option ISOLTION TO ENCLOSURE Isolation output - earth Isolation input - earth Isolation input - output GENERL DT Operating temperature C Storage temperature C Humidity during storage % IP protection Efficiency % Status indicator Standards Electromagnetic compatibility Class Weight kg pproval and marks,... SCREW CONNECTION Wire cross-section mm 2 Depth x width x height mm ~ 60HZ 25 2 ±20% 3 36W ± 1.5% 13.8V 20mS Full load 0.5% 0 to 40 C at 10-90% RH -20 to 85 C 10-90% RH IP44 : :2009+1: :2011+2:2013 EN55022:2010;EN55024:2010+1:2015; EN :2014;EN : kg 0.2mm 2 110x48x ~ 60HZ 25 2 ±20% 4 48W ± 1.5% V 20mS Full load 0.5% 0 to 40 C at 10-90% RH -20 to 85 C 10-90% RH IP44 : :2009+1: :2011+2:2013 EN55022:2010;EN55024:2010+1:2015; EN :2014;EN : kg 0.2mm 2 120x56x35 IP

17 C C ~ 60HZ ~ 60HZ 30 5 ±20% 5 60W ± 1.5% V 20mS Full load 0.5% ±20% 7 84W ± 1.5% V 20mS Full load 0.5% 0 to 40 C at 10-90% RH -20 to 85 C 10-90% RH IP44 : :2009+1: :2011+2:2013 EN55022:2010;EN55024:2010+1:2015; EN :2014;EN : kg 0 to 40 C at 10-90% RH -20 to 85 C 10-90% RH IP44 : :2009+1: :2011+2:2013 EN55022:2010;EN55024:2010+1:2015; EN :2014;EN : kg 0.5mm 2 122x60x mm 2 170x80x

18 serie PC COSTNT CURRENT PC PC PC PC PC PC INPUT Input voltage Vac Input current Input frequency Hz Inrush current Required input fuse OUTPUT Output voltage Vdc Number of LEDs x - y LEDs Output voltage adjustment ± xx % Output current m Rated output power W Residual ripple, switching peaks mvpp Overload protection % of rated output current Over voltage protection V Hold-up time ms Control at % load (load regulation) % Parallel connection option ISOLTION TO ENCLOSURE Isolation output - earth Isolation input - earth Isolation input - output GENERL DT Operating temperature C Storage temperature C Humidity during storage % IP protection Efficiency % Status indicator Standards Electromagnetic compatibility Class Weight kg pproval and marks,... SCREW CONNECTION Wire cross-section mm 2 Depth x width x height mm R 1/4W 3-22Vdc 6-14Vdc m 500m 650m 6W % 24V 16V 14V 4.8% 4.5% 4.5% -10 to 50 C -20 to 80 C 75% EN61347 EN55015 EN kg 1.5 mm 2 60x44x Vac 0.12 at 235V /250V Vdc Vdc Vdc m 500m 650m 12W 40V 30V 21V 20ms at 230V 5% -15 to 45 C 5-85% RH 83% 83% 85% EN EN EN kg, TUV, SELV Input: 2 x Output: 2 x x45x

19 PC PC PC PC PC PC PC Vac Vac Vac Vac 0.2 at 235V 0.15 at 235V 0.18 at 235V 0.25 at 235V /250V 1.25/250V 1.25/250V 1.25/250V 16-57Vdc 14-40Vdc 20-34Vdc 28-43Vdc 24-35Vdc 32-48Vdc 24-36Vdc m 500m 650m 700m 1050m 1050m 1400m 20W 30W 36W 50W 60V 43V 37V 46V 38V 49V 37V 50ms at 230V 5% -15 to 45 C -15 to 45 C -15 to 45 C -15 to 45 C 5-85% RH 5-85% RH 5-85% RH 5-85% RH 85% 88% 85% 89% 88% 90% 89% EN EN IEC 62384:2006 IEC 62384:2006 IEC 62384:2006 EN55015 EN55015 EN61547 EN55015 EN61547 EN55015 EN kg 0.14kg 0.14kg 0.2kg, TUV, SELV, SELV, SELV, SELV Input: 2 x Output: 2 x Input: 2 x Output: 2 x Input: 2 x Output: 2 x Input: 2 x Output: 2 x x45x19 153x41x32 153x41x32 180x52x

20 serie ST COSTNT VOLTGE ST ST ST ST INPUT Input voltage Vac Input current Input frequency Hz Inrush current Required input fuse OUTPUT Output voltage Vdc Output voltage adjustment ± xx % Output current Rated output power W Residual ripple, switching peaks mvpp Overload protection % of rated output current Over voltage protection V Hold-up time ms Control at % load (load regulation) % Parallel connection option ISOLTION TO ENCLOSURE Isolation output - earth Isolation input - earth Isolation input - output GENERL DT Operating temperature C Storage temperature C Humidity during storage % IP protection Efficiency % Status indicator Standards Electromagnetic compatibility Class Weight kg pproval and marks,... SCREW CONNECTION Wire cross-section mm 2 Depth x width x height mm Vac 0.16 at 235V /250V W 848mV 1700mV +20% 12.6V 25.2V 20ms at 230V -15 to 45 C 5-85% RH 82% 84% IEC 62384:2006 EN55015 EN kg, TUV, SELV 1.5 mm 2 138x40x Vac 0.16 at 235V /250V W 848mV 1700mV +10% 12.6V 25.2V 150ms at 230V -15 to 45 C 5-85% RH 85% 88% IEC 62384:2006 EN55015 EN kg, TUV, SELV 1.5 mm 2 246x30x , SUPER SLIM

21 serie CP COSTNT CURRENT CP CP CP INPUT Input voltage Vac Vac Vac Vac Input current 0.13/230Vac 0.16/230Vac 0.28/230Vac Input frequency Hz 47 ~ 63Hz 47 ~ 63Hz 47 ~ 63Hz Inrush current Required input fuse OUTPUT Output voltage Vdc 12-30Vdc 20-50Vdc 18-45Vdc Number of LEDs x - y LEDs Output voltage adjustment ± xx % Output current m 500m 350m 700m Rated output power W 15W 18W 31.5W Residual ripple, switching peaks mvpp 500mV 800mV 600mV Overload protection % of rated output current 120% 120% 120% Over voltage protection V 1.2*V out 1.2*V out 1.2*V out Hold-up time ms Control at % load (load regulation) % 40% - 100% 40% - 100% 40% - 100% Parallel connection option ISOLTION TO ENCLOSURE Isolation output - earth 0.5KVac 0.5KVac 0.5KVac Isolation input - earth 1.88KVac 1.88KVac 1.88KVac Isolation input - output 3.75KVac 3.75KVac 3.75KVac GENERL DT Operating temperature C -25 to 50 C -25 to 50 C -25 to 50 C Storage temperature C Humidity during storage % 20-95% RH 20-95% RH 20-95% RH IP protection Efficiency % 85% 85% 85% Status indicator Standards EN EN EN Electromagnetic compatibility Class Weight kg 0.2kg 0.25kg 0.25kg pproval and marks,... CE CE CE SCREW CONNECTION Wire cross-section mm 2 Depth x width x height mm 165x29x20 165x29x20 224x29x C INPUT DC OUTPUT C INPUT DC OUTPUT CP015W/CP018W CP032W

22 serie PP COSTNT VOLTGE PP PP PP PP INPUT Input voltage Vac Input current Input frequency Hz Inrush current Required input fuse OUTPUT Output voltage Vdc Output voltage adjustment ± xx % Output current Rated output power W Residual ripple, switching peaks mvpp Overload protection % of rated output current Over voltage protection V Hold-up time ms Control at % load (load regulation) % Parallel connection option ISOLTION TO ENCLOSURE Isolation output - earth Isolation input - earth Isolation input - output GENERL DT Operating temperature C Storage temperature C Humidity during storage % IP protection Efficiency % Status indicator Standards Electromagnetic compatibility Class Weight kg pproval and marks,... SCREW CONNECTION Wire cross-section mm 2 Depth x width x height mm R 1/4W Max 0.25 Max W 800mV 1500mV 120% 12.6V 25.2V 0.05% -10 to 50 C -20 to 80 C 73% 74% EN61347 EN55015 EN kg 51.5x26x R 1/4W Max 0.75 Max W 740mV 800mV 120% 12.6V 25.2V 0.05% -10 to 50 C -20 to 80 C 83% EN61347 EN55015 EN kg 90x34x23 51,

23 serie PP COSTNT CURRENT PP PP PP PP PP PP INPUT Input voltage Vac Input current Input frequency Hz Inrush current Required input fuse OUTPUT Output voltage Vdc Number of LEDs x - y LEDs Output voltage adjustment ± xx % Output current m Rated output power W Residual ripple, switching peaks mvpp Overload protection % of rated output current Over voltage protection V Hold-up time ms Control at % load (load regulation) % Parallel connection option ISOLTION TO ENCLOSURE Isolation output - earth Isolation input - earth Isolation input - output GENERL DT Operating temperature C Storage temperature C Humidity during storage % IP protection Efficiency % Status indicator Standards Electromagnetic compatibility Class Weight kg pproval and marks,... SCREW CONNECTION Wire cross-section mm 2 Depth x width x height mm R 1/4W 3-3-7Vdc 3-5Vdc m 500m 650m 3W % 14V 8V 7V 2.8% 1.6% 1.5% -10 to 50 C -20 to 80 C 70% EN61347 EN55015 EN kg 51.5x26x R 1/4W 10-21Vdc Vdc m 500m 650m 6W % 23V 14V 12V 4.8% 4.5% 4.5% -10 to 50 C -20 to 80 C 78% EN61347 EN55015 EN kg 1.5 mm 2 65x35x23 51,

24 serie DRIVER COSTNT CURRENT DRVRGB.C DRV.IP DRV.M DRVRGB.IP DRV DRV.C DRVRGB 11, ,5 27 7, , , m 500m 650m 350m 500m 650m 350m 500m 650m 350m 500m 650m 350m 350m 350m OUTPUT CURRENT 1 LED 1-6 LED 1-6 LED 1-6 LED 1-6 LED NUMBER OF LEDS 12/ 12/ 12/ 12/ INPUT VOLTGE Connector Cable Connector Cable Cable Connector Cable CONNECTION 33x7,5mm 27x11,5mm 45x11,5mm 29x15mm 27x34,5mm 45x34,5mm 29x42mm DIMENTION IP54 IP PROTECTION DRV350.M DRV500.M DRV650.M DRV350 DRV500 DRV650 DRV350.C DRV500.C DRV650.C DRV350.IP DRV500.IP DRV650.IP DRVRGB DRVRGB.C DRVRGB.IP DRV.M DRV DRV.C DRV.IP DRVRGB MODEL

25 limentatori DI CMBIO CODICE MODELLO/MODELLI DESCRIZIONE RES limentatore di ricambio per famiglia RES ZEUS6060 limentatore di ricambio per ZEUS ZEUS, EOS, ISIDE lim. di ricambio per ZE1001/03/50, EO1001, IS ZEUS1020 limentatore di ricambio per ZEUS ZEUS1030 limentatore di ricambio per ZEUS ZEUS1040 limentatore di ricambio per ZEUS ZEUS1006 limentatore di ricambio per ZEUS ZEUS1046 limentatore di ricambio per ZEUS ZEUS1048 limentatore di ricambio per ZEUS ZEUS6060 limentatore dimmerabile per ZEUS WU011 limentatore di ricambio per WU TRITONE1060 limentatore di ricambio per TRITONE TRITONE1061 limentatore di ricambio per TRITONE TRITONE1062 limentatore di ricambio per TRITONE TRITONE1063 limentatore di ricambio per TRITONE TRITONE1064 limentatore di ricambio per TRITONE TRITONE1065 limentatore di ricambio per TRITONE HELIOS3144, HELIOS6644 limentatore di ricambio per HELIOS 44W HELIOS6636 limentatore di ricambio per HELIOS 36W RES3004 limentatore di ricambio per RES RES1070, RES1080 limentatore di ricambio per RES1070 e RES ZEUS1184, 1ZEUS185 limentaotre di ricambio per ZEUS1184 e ZEUS ZEUS1194, ZEUS1195 limentaotre di ricambio per ZEUS1194 e ZEUS ZEUS1204, ZEUS1205 limentaotre di ricambio per ZEUS1204 e ZEUS1205

26 I disegni, le dimensioni, materiali, colori e finiture presentati in questo catalogo si intendono a titolo indicativo. Dogi Group si riserva il diritto di modificare i prodotti in qualsiasi momento senza obbligo di preavviso. I disegni e le foto sono di proprietà di Dogi Group S.r.l. È vietato qualsiasi tipo di riproduzione, modifica e duplicazione. The designs, sizes, materials, colors and finishes shown in this catalog are for information purposes only. Dogi Group reserves the right to change products at any time without prior notice. The drawings and the photos are owned by Dogi Group S.r.l. ny kind of reproduction, modification, duplication is forbidden. DOGI GROUP S.r.l. Via Marconi, 105/ Magnago (MI) Tel Fax info@ecopowereurope.it STNDRD

27 DOGI GROUP s.r.l. Via Marconi, 105/ Magnago (MI) Tel Fax