Multipoint measuring units UPM100 and Centipede100
|
|
- Stella Hart
- 5 years ago
- Views:
Transcription
1 OTTINGER ALDWIN ESSTECHNIK HBM Mess- und Systemtechnik GmbH Multipoint measuring units UPM100 and Centipede100 S 33.UPM e
2 Multipoint measuring units UPM100 and Centipede100 HBM s multipoint measurement technique has proved reliable in practice for many years. The UPM100 and Centipede100 multipoint measuring units comprise the experience and technical know-how that is needed in the different fields of application for multipoint measurement techniques. Static and quasi-static measurement tasks can be performed by a self-contained measurement system or in conjunction with a computer. The devices have a suitable amplifier for every transducer: a DC-voltage amplifier for thermocouples, voltage and current sources, a 600Hz carrier frequency amplifier for measurements with strain gauges and a 4.8kHz carrier frequency amplifier for inductive transducers. Each measuring point can be adjusted individually to suppress interference. Typical fields of application are experimental stress analysis, for monitoring buildings and bridges, for example, and applications in the research and development sectors to determine the properties of components, materials or even entire systems in mechanical engineering and in the motor and aviation industries. UPM100 is designed so that it can be used as a selfcontained measurement system. The front panel is used for measurement and control functions. Measuring points and device parameters are modified using the separate keyboard, in dialogue mode. The integrated strip printer is provided to log the measurement sequences or to print out the device parameters. The UPM100 can also be fully computercontrolled via the integrated interfaces. Using HBM transducers and multipoint measuring units to monitor Reuss bridge repairs.
3 Centipede100 an in-expensive version of the UPM100, is intended exclusively for use with a computer. As with the UPM100, all functions can be controlled over the RS232C, RS485 or IEEE 488 interfaces. However, manual control via keyboard is not possible, as there is no measured value display, no keyboard and no printer. Expanded Kreuzer circuit Printer Interface Auto-calibration Connection diagram for the Centipede100 and the UPM100: Block diagram with transducers and output devices that can be connected.
4 Connecting the measuring points The measuring points are connected with semiconductor switches, which bring considerable advantages: they are reliable, quick, bounce free and wear free. These advantages come as a result of the Expanded Kreuzer circuit developed and patented by HBM. The excitation voltage at the measuring points is tapped and readjusted by the sensor circuits.this means that measurement is extremely accurate, even for single strain gauge measurements, at distances of up to 500m, without the influence of cable resistances and contact resistances. Single strain gauge measurements without this cable resistance compensation can otherwise show errors of more than 10%. Relevant switching units are available for connection, for each type of transducer. 10 transducers can be connected to each switching unit by 72-pin multipoint connectors. Expanded Kreuzer circuit G Transducers that be connected UMH 3251: S.G. 1/4, 1/2, 4/4 bridges, inductive transducers UMH 3252: resistance thermometers (Pt100), resistances Ω potentiometers UMH 3253: thermocouples J, T, K, S, direct voltage ±100mV, ±10V direct current ±20mA, mA The Expanded Kreuzer circuit allows single strain gauges to be connected faultlessly by cables up to 500m in length.
5 Distribution panels are available as an accessory to make it easy to connect the measuring point cables. The single-wire connections from the measuring points are combined by plug or screw connections on a distribution panel. This makes it easy and quick to change the assignment. Appropriately preformed cables are available for the connection to the device. Special features UPM100 Centipede100 Display for measured values / device parameters Keyboard for manual operation Printer for measured values / device parameters RS232C interface for external printer or for computer connection RS485 interface for computer connection IEEE 488 interface for computer connection ± 10V control output Start of acquisition trigger input, alarm signal output Measurement memory for 50 measurement cycles Auto-calibration, zero balance, measuring point testing Min/max measuring and peak value operating modes Transducer scaling Linearisation for thermocouples Expanded Kreuzer circuit for S.G. 1 /4 bridges Integrating A/D converter Adjustable A/D converter rate for each measuring point 3 measuring amplifiers: DC-voltage amplifier, 600Hz and 5kHz carrier-frequency amplifiers The scope of supply of the UPM100 and Centipede 100 multipoint measuring units includes the catman measurement technique software for Windows 95/98/NT. This operator-friendly and userfriendly software makes it easy to configure the device and acquire the measurement data and allows any design of data analysis and display, as well as automating measurement sequences by using script commands. The user also has available extensive mathematics functions with a formula interpreter and a Help system.
6 Strain gauge, amplifier and software Everything you need for experimental stress analysis from one source When it comes to experimental stress analysis, once again HBM is complying with the ever-increasing demand from customers for everything from one source. Together with the various HBM measuring amplifiers and the catman measurement data acquisition and analysis software, the user has available a large number of complete measurement chains for dynamic and quasi-static measurement tasks. Strain gauges - forever young... In the sixty or so years since its invention, there has been a rapid increase in the diversity of applications for the strain gauge. What started with materials testing has now expanded to countless areas of experimental measurement techniques and the manufacturing of measurement transducers. There is no other physical process in the experimental mechanics sector that delivers such varied and reliable measurement information for so little financial outlay. HBM provides a wide range of different strain gauges, as well as the relevant application accessories for this special field of measurement technology. As well as our ever-increasing range of strain gauge products and accessories, our customers also appreciate how quickly customerspecific strain gauges are made up. Comprehensive, multilingual documentation for professionals and beginners alike complete the experimental stress analysis product programme. The DAK-1 Starter Set is an excellent opportunity to get acquainted with this technique in theory and in practice. Of course, HBM also provide seminars both for the strain gauge application and for the relevant hardware and software. The complete strain gauge programme with all the additional accessories and extremely helpful application notes, can be found on the new, free SGdirect CD-ROM. HBM S.G. chain for optimising gearwheels DAK1 S.G. Starter Set HBM strain gauges (selection)
7 Specifications Type UPM100 Centipede100 Number of measuring points that can be connected Transducers which can be connected with selector module Strain gauges in quarter, half and full bridge, UMH 3251 circuits, inductive half bridges, UMH 3252 Pt 100, resistors, potentiometric transducers, UMH 3253 Thermocouples J, T, K, S, mv voltage sources, voltage and current sources Permissible transducer resistance Strain gauge Ω (U B = 5V) (U B = 0.5V) Potentiometric transducers Ω (TF) (DC) Permissible transducer inductance mh through a FET semiconductor switch, synchronised at Transducer connection the zero crossover of the CF bridge excitation voltage Measuring point selection manual or automatic computer-controlled Length of cable between selector module & transducer, selectable m < 50; < 500 Bridge exitation voltage U B with DC V 5 with 600Hz TF V 5 or 0.5 with 5kHz TF V 2.5 Measuring range DC strain gauges, SG transducers, potentiometric transducers mv/v ± (±40.000µm/m) Pt100 C thermocouple types J, T, K, S C measurement and linearisation ranges to DIN, IEC 584 voltage V ±10 (R E 10MΩ) mv ±100 (R E 10MΩ) current ma ± 20 (R E = 50Ω) 600Hz CF strain gauges, SG transducers, potentiometric transducers mv/v ±10 (±20.000µm/m) Pt100 C resistors Ω kHz CF inductive transducers mv/v ±10, ±100, ±1000 Ranges of adjustment Gauge factor Bridge factor Scale factor by entry of the transducer's nominal range and nominal sensitivity Alarm value ± (2 values per measuring point) Measurement memory for cycles 50 Analogue output V ±10 (for 100% or 10% of measurement range) Interfaces IEEE RS-232-C (V.24) selectable transmission speed baud HBM-interface for dialogue entry via BF01 keyboard Linearity deviation % 0.02 Peak value measurement deviation for DC, 5kHz TF % <-1 (up to 39Hz) 600Hz TF % <-1 (up to 23Hz) Ambient temperature per 10K DC 600Hz TF 5kHz TF in the nominal temperature range (rel. to full scale) on the zero point % < < 0.01 <0.01 on the sensitivity % < < 0.02 <0.1 Nominal temperature range C Permissible ambient temperature range C Protection against mains failure (lithium battery) years typ. 5 Supply voltage V 230 ± 10%; Option 115V (approx. 40VA) Dimensions (h x w x d) mm 177 x 460 x 435 front panel of UPM100 (h x w) mm x 328 (6/8 of 19") front panel of D20A (h x w) mm x 108 (2/8 of 19") Weight kg approx for each UMH 32..
8 HBM worldwide Europe 17 agencies 2 subsidiaries Germany Darmstadt head office 7 agencies Non-European Countries 25 agencies ww.hbm.de HBM information always up to date Measuring amplifiers and transducers for pressure, force, torque, and displacement HBM provides transducers for pressure, force, torque, and displacement. There is also a wide range of measuring amplifiers with appropriate software. Interested? If so, we will be happy to send you more information on our product programme. HOTTINGER BALDWIN MESSTECHNIK HBM Mess- und Systemtechnik GmbH Postfach , D Darmstadt Im Tiefen See 45, D Darmstadt Tel.: +49/ 61 51/ ; Fax: +49/ 61 51/ ; TSC@hottinger-baldwin.com Modifications Änderungen vorbehalten. reserved. All Alle details Angaben describe beschreiben our products unsere in Produkte general form in allgemeiner only. They Form. are not to be understood as Sie stellen keine Eigenschaftszusicherungen express im Sinne warranty des 459, and Abs. do not 2, BGB constitute dar und any liability begründen whatsoever. keine Haftung. IM - D dr
Data Sheet. Absolute pressure transducer Nominal (rated) pressure 10 bar to 3000 bar. Special features
P3 Top Class P3MB version with fixed cable P3MBP version with plug connection TEDS: Transducer Electronic Data Sheet P3 Absolute pressure transducer Nominal (rated) pressure 10 bar to 3000 bar Special
More informationData sheet. P3 Top Class BlueLine. P3MBP BlueLine. Ultra-high pressure transducers to 15,000 bar. Special features
Ultra-high pressure transducers to 1,000 bar Data sheet Special features P Top Class BlueLine PMBP BlueLine - For static and dynamic pressure variance, pressure peaks and pressure fluctuations - Principle
More informationelectronics Data Sheet Industrial Amplifier Special features Dimensions (in mm; 1 mm= inches) B en
C l i p electronics Industrial Amplifier Data Sheet Special features Amplifier and additional units for strain gauge full bridges and inductive half and full bridges Modules for mounting onto support rails
More informationMX1615. Data sheet. Bridge/strain gauge amplifier
MX1615 Bridge/strain gauge amplifier Data sheet Special features 16 individually configurable inputs Connection of strain gauges in quarter-, half- and full-bridge Bridge excitation : DC or carrier frequency
More informationCANHEAD. Data Sheet. Special features. Distributed measurement acquisition. B en
CANHEAD Data Sheet Special features 10channel amplifier modules for installation close to measuring points Measured data transmission to communication master via field bus Base modules for individual SGs,
More informationE *) F 15. H 12 h9. 5.5f7 8h6. a./f approx. 0.5mm Free stroke. Displacement. Initial stroke
Displacement probe Plunger WA Inductive Standard Displacement Transducers Special features Displacement probe and transducer with detachable plunger Good thermal stability in the event of temperature gradients
More informationSpecifications Type WA2 WA10 WA20 WA50 WA100 WA200 WA300 WA500 Nominal displacement mm Nomi
Displacement probe WA Inductive Standard Displacement Transducers Special features Data Sheet Plunger Displacement probe and transducer with detachable plunger Good thermal stability in the event of temperature
More informationInductive Standard Displacement Transducers
WA Inductive Standard Displacement Transducers Special features - Available as displacement probe or with detachable plunger - Good thermal stability in the event of temperature gradients - Space saving,
More informationMX440A. Data Sheet. Universal amplifier. Special features. Block diagram Digital platform. B en
MX440A Universal amplifier Data Sheet Special features 4 individually configurable inputs (electrically isolated) Connection of more than 12 transducers technologies Data rate: up to 19,200 Hz 24 bit A/D
More informationMX1615B R. Data Sheet. Ultra-rugged Bridge Amplifier
MX1615B R Ultra-rugged Bridge Amplifier Data Sheet Special features 16 individually configurable inputs Connection of strain gages in quarter-, half- or full-bridge Bridge excitation: DC or carrier frequency
More informationT10F. Data Sheet. Torque Flange. Special features. Installation example T10F. B en
T10F Torque Flange Data Sheet Special features Extremely short design High permissible dynamic loads High permissible transverse forces and bending moments Very high torsional stiffness Contactless Selectable
More informationBenefits/Application. Class 00 according to ISO 376 in the range 10 % to 100 % Especially to trace back Force Standard Machines
Data sheet Force transfer standard Series KTN-Z/D (5 N 1000 kn) Benefits/Application Class 00 according to ISO 376 in the range 10 % to 100 % For static tensile and compressive forces Especially to trace
More informationT10FS. Data Sheet. Torque Flange. Special features. Installation example T10FS. B en
T10FS Torque Flange Data Sheet Special features Nominal (rated) torques: 100 NVm, 200 NVm, 500 NVm, 1 knvm, 2 knvm, 3 knvm, 5 knvm, 10 knvm Nominal speed from 12,000 rpm to 24,000 rpm Low rotor weights
More informationMX1615B-R. Ultra-rugged Bridge Amplifier. Special features. Data sheet. Block diagram
MX1615B-R Ultra-rugged Bridge Amplifier Special features - 16 individually configurable inputs - Connection of strain gages in half-, full- or quarter-bridge (120 Ohm or 350 Ohm) - Bridge excitation: DC
More informationMX1616B. Strain gauge bridge amplifier. Special features. Data sheet. Block diagram
MX1616B Strain gauge bridge amplifier Special features - 16 individually configurable inputs - Connection of strain gauges in full-, halfand quarter-bridge (350 or 1,000 Ohm) - Bridge excitation : DC or
More informationMDEX. on customized sensors. Technical information. Torque transducer. CS-T-04-MDEX Special features
MDEX Torque transducer CS-T-04-MDEX Special features - Explosion proof acc. to ATEX 95 - Exx II 2 G Ex deq IIC T4 - Nominal (rates) torque of 100kNm, 130kNm and 150kNm - HBM Accuracy Class 0,1 - Digital
More informationOperating manual. 600 Hz Measuring Amplifier ME30. A en
Operating manual 600 Hz Measuring Amplifier ME30 ME30 Contents 3 Page Safety instructions............................................. 4 1 Measuring Amplifiers on Eurocards ME30.................... 8
More informationU2B. Force Transducer. Special features. Data sheet
U2B Force Transducer Special features - Tensile/compressive force transducer - Non rusting, degree of protection IP67 - Can be configured with different cable lengths, plug fitting and TEDS on request
More informationMX840B R. Data sheet. Ultra-rugged universal amplifier CAN. Special features. Block diagram. B en
MX840B R Ultra-rugged universal amplifier Data sheet Special features 8 individually configurable inputs (electrically isolated) Connection of more than 16 technologies per channel Sampling rates of up
More informationU9C. Data sheet. Force Transducer. Special features. B en
U9C Force Transducer Data sheet Special features Tensile/compressive force transducer Accuracy class 0.2 Nominal (rated) forces 50 N 50 KN Non-rusting, protection class IP67 Configurable with different
More informationSUNSTAR 传感与控制
SUNSTAR 传感与控制 http://www.sensor-ic.com/ HBM Mess- und Systemtechnik GmbH Electrical measurement of mechanical quantities Operating manual Force transducer with strain gauge measuring system C9B B 20.C9B.20
More informationMX1615B. Data sheet. Bridge/strain gauge amplifier
MX1615B Bridge/strain gauge amplifier Special features 16 individually configurable inputs Connection of strain gauges in quarter-, half- and full-bridge Bridge excitation : DC or carrier frequency Internal
More informationU2B. Data sheet. Force Transducer. Special features. B en
U2B Force Transducer Special features Data sheet Tensile/compressive force transducer Non-rusting, degree of protection IP67 Can be configured with different cable lengths, plug fitting and TEDS on request
More informationMX1615B. Strain gauge bridge amplifier. Special features. Data sheet. Block diagram
MX1615B Strain gauge bridge amplifier Special features - 16 individually configurable inputs - Connection of strain gauges in full-, half-, or quarter-bridge (120 or 350 Ohm) - Bridge excitation : DC or
More informationC10. Data sheet. Force transducer. Special features. B de
C10 Force transducer Data sheet Special features Force transducer for static and dynamic applications Made of non-rusting materials Precise (accuracy class from 0.03) Numerous options (double bridge, TEDS,
More informationCalibration and Testing
GHM GROUP CORPORATE GHM Messtechnik GmbH Schloßstr. 6 88453 Erolzheim GERMANY Phone +49 7354 937233-76 Fax +49 7354 937233-88 Features System Sources Measurement chain Strain gauge bridges Current signals
More informationMX1601B. Data Sheet. Universal amplifier. Special features. Block diagram Digital platform. B en
MX1601B Universal amplifier Data Sheet Special features 16 individually configurable inputs (electrically isolated) Connection of of standard signals (60, 10, 100 m, 20 ma, IEPE) Individual data rates
More informationC9C. Force Transducer. Special features. Data sheet
C9C Force Transducer Special features - Compact design compressive force transducer - Accuracy class 0.2 - Nominal (rated) forces 50 N to 50 kn - Configurable with different cable lengths, plug assembly
More informationU10M. Force Transducer. Special features. Data sheet. Mounting dimensions of the connection variants in mm [inch]
U10M Force Transducer Special features - Precise and robust tensile/compressive force transducer for static and dynamic measurement tasks - High lateral force and bending moment stability, the effect of
More informationT40FH. Torque flange. Special features. Data sheet
T40FH Torque flange Special features - Nominal (rated) torques: 100kNm, 125kNm, 150kNm, 200kNm, 250kNm, 300kNm - Nominal (rated) rotational speed of 2000 rpm up to 3000 rpm - Compact design - Version for
More informationHigh-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals
Accessories High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals WIKA data sheet AC 80.03 Applications Machine building
More informationS9M. Force Transducer. Special features. Data sheet
S9 Force Transducer Special features - Tensile/compressive force transducer - ccuracy class 0.02 - Hermetically encapsulated (IP68) - Rust-resistant materials - vailable in different cable lengths and
More informationT22. Data Sheet. Torque transducer. Special features. Installation example with two bellows couplings. B en
T22 Torque transducer Data Sheet Special features - Nominal (rated) torques N m, 10 N m, 20 N m, 0 N m, 100 N m, 200 N m, 00 N m and 1 kn m - Nominal (rated) rotational speeds of 9000 rpm to 16 000 rpm
More informationU15. Force transducer. Special features. Data sheet. Installed dimensions of connection variants
U15 Force transducer Special features - Tensile/compressive force transducer - Nominal (rated) forces 2.5 kn to 2.5 MN - lass 0.5 to ISO 376 in force measurement range between 10% and 100% of the nominal
More informationT40FM. Data Sheet. Torque flange. Special features. Overall concept. B en
T40FM Torque flange Special features Data Sheet - Nominal (rated) torque: 15 kn m, 20 kn m, 25 kn m, 30 kn m, 40 kn m, 50 kn m, 60 kn m, 70 kn m and 80 kn m - Nominal (rated) rotational speed up to 8000
More informationHigh-precision process calibrator Model CED7000
Calibration technology High-precision process calibrator Model CED7000 WIKA data sheet CT 85.51 Applications Research and development laboratories Calibration service companies and service industry Industry
More informationRSCC. Data Sheet. Load cells. Special features. Diagram of RSCC load cell. Design: 500 kg to 5 t. Design: 50 kg to 200 kg. B
RSCC Load cells Data Sheet Special features - Load cell with SG measurement system - aximum capacities: 50 kg to 5 t - Hermetically sealed (IP68) - Rust resistant materials - Legal for trade to 3000 divisions,
More informationT22. Torque transducer. Special features. Data sheet
T22 Torque transducer Special features - Nominal (rated) torques 0.5 Nm, 1 Nm, 2 Nm, 5 Nm, Nm, Nm, 50 Nm, 0 Nm, 0 Nm, 500 Nm and 1 knm - Nominal (rated) rotational speed up to 000 rpm (depending on measuring
More informationMX440B. Data Sheet. Universal amplifier. Special features. Block diagram Digital platform. B en
MX440B Universal amplifier Data Sheet Special features 4 individually configurable inputs (electrically isolated) Connection of more than 16 different transducer types Individual data rates up to 40kHz
More informationMX460B-R. Rugged pulse and frequency measuring module. Data sheet. Special features. Block diagram
MX460B-R Rugged pulse and frequency measuring module Special features - Four individually configurable inputs (electrically isolated) - Measure any kind of digital signals up to 1 Mhz for measurement of
More informationGSV-2MSD-DI IP43. Highlights
GSV-2MSD-DI IP43 Highlights Data logger with SD-card slot USB-interface for strain gauge quarter, half and full bridges 0...10V, potentiometric 24 bit resolution 6 sensor configurations recallable battery
More informationMETRAClip87 and 88 Clamp Multimeters
3-349-795-03 1/7.14 Current and frequency measurement via clamp meter: METRAClip87: 1500 A AC TRMS and 1500 A DC METRAClip88: 2000 A AC TRMS and 3000 A DC Multimeter functions via connector sockets: V
More informationOperating manual. Force transducer with strain gage measuring system C9B. A en. hvordan man bruger astrologi med tibetanske medicin
Operating manual Force transducer with strain gage measuring system C9B hvordan man bruger astrologi med tibetanske medicin C9B Contents 3 Page Safety instructions..............................................
More informationSpecifications (in accordance with DIN 16086) Equipment family Digibar II Type 1-PE50A1/...; K-PE PE00A1/...; K-PE00... Class of accuracy 0.2 0
Digibar II: PE00, PE50 Digital pressure gage Special features Data Sheet PE00 PE50 Operated as manometer with battery operation and Operated as pressure measurement transmitter with 420 current output,
More informationISOBE5600. Data sheet. Isolated Probe Systems. - ISOBE5600 Isolation system - ISOBE5600 Transient recorder. Features and Benefits
ISOBE5600 Isolated Probe Systems - ISOBE5600 Isolation system - ISOBE5600 Transient recorder Data sheet Features and Benefits ISOBE5600 Isolation system - Cost-effective - Fiber-optic isolation - Analogue-in
More informationTB2. Torque reference transducer. Special features. Data sheet
T2 Torque reference transducer pecial features tandard version - ccuracy class 0.03 - ominal (rated) s 100 m, 200 m, 500 m, 1 k m, 2 k m, 3 k m, 5 k m and 10 k m - High permissible oscillation width -
More informationSingle point load cell
PW15AH Single point load cell Special features - Nominal load 10 kg... 100 kg - Stainless steel - High ratio of minimum verification interval Y - Industrial Footprint (SP4M) - Degree of Protection IP68;
More informationMETRAClip85 and 86 Clamp Multimeters
3-349-794-03 1/8.14 Current and frequency measurement via clamp meter: 600 A AC TRMS and 900 A DC (automatic or manual switching) Multimeter functions via connector sockets: V (AC TRMS and DC) up to 1000
More informationEBRG. Data Sheet. edaq Bridge Layer. Special Features. Block Diagram. B en
EBRG edaq Bridge Layer Data Sheet Special Features - 16 simultaneously-sampled, low-level differential analog inputs from ±0.000625 to ±10 V - 96 automatic gain states ensuring use of the fullest possible
More informationConnection. Input EEx ia IIC. Sense. Fine tuning adjustment. Fine tuning amplifying. Amplifying. Adjustment. Output. Composition
Converter Connection 1-channel EEx ia IIC for 4-wire and 6-wire bridges Analogue output 0/4 ma... 20 ma or 4mA...-12mA Full bridge load cells and strain gauges circuit for resistance bridges up to 17 Ω
More informationMX840B. Data Sheet. Universal amplifier CAN. Special features. Block diagram. B en
MX840B Universal amplifier Data Sheet Special features 8 individually configurable measurement channels (electrically isolated) Connection of more than 16 transducer technologies per channel Individual
More information100/200/400 t. Self-centering pendulum lead cells. Data sheet. Special features
C16A 100/200/400 t Self-centering pendulum lead cells Special features - Self restoring function - Nominal (rated) loads: 100 t, 200t and 400t - Simple installation - Rust resistant materials, laser welded,
More informationPrimary-standard resistance thermometry bridge Model CTR9000
Calibration technology Primary-standard resistance thermometry bridge Model CTR9000 WIKA data sheet CT 60.80 Applications High-performance AC resistance thermometry bridge for very accurate temperature
More informationSeries GLET Accessory for dataloggers series GL in modular enclosure
PRESSURE LOAD TORQUE POSITION ROTARY ANGLE TILT ACCELERATION VIBRATION RATE SIGNAL CONDITIONER DATALOGGER Series GLET Accessory for dataloggers series GL in modular enclosure Models: GLET-IU-BNC-BA4 passive,
More informationOperating manual. Digital Transducer-Electronics AED 9301A. Part 1, Profibus basic device
Operating manual Digital Transducer-Electronics AED 9301A Part 1, Profibus basic device 1/24 Part 1 Description of the hardware of the AED9301A-basic device Contents Page Safety Notes... 3 1 Introduction
More informationMGCplus. Measuring amplifier system. Special features. Data sheet
MGCplus Measuring amplifier system - Up to 128 channels per MGCplus enclosure (256 or 512 with CANHEAD or CAN) - Sampling rates up to 19.2 ks/s per channel - Simultaneous and parallel measurement with
More informationJUMO Wtrans Receiver Universal Receiver for JUMO Wireless Measuring Probes
Data sheet 902931 Page 1/10 JUMO Wtrans Receiver Universal Receiver for JUMO Wireless Measuring Probes For processing physical measurands of the JUMO Wtrans series RS485 interface with Modbus protocol
More informationT40B. Torque Flange. Special features. Data sheet. Overall concept
T40B Torque Flange Special features - Nominal (rated) torques 50 N m, 0 N m, 200 N m, 500 N m, 1 kn m, 2 kn m, 3 kn m, 5 kn m and kn m - Nominal rated rotational speed up to 24000 rpm (depending on nominal
More informationSMSTRB. Data Sheet. Strain SMART Module. Special Features. Block Diagram. B en
SMSTRB Strain SMART Module Data Sheet Special Features - Conditions and amplifies output to a high level signal for use with the SoMat EHLS or ELHLS - Strain gage conditioning with support for 1/4-, 1/2-
More informationMX1601B-R. Ultra rugged Standard Amplifier. Data sheet. Special features. Block diagram
MX1601B-R Ultra rugged Standard Amplifier Special features - 16 individually configurable inputs (electrically isolated) - Support of 60 V, 10 V, 100 mv, 20 ma or IEPE on all channels - Sample rate: up
More informationSC-4/M User manual 4-channel measuring amplifier
Kraus Messtechnik GmbH Gewerbering 9, D-83624 Otterfing, ++49-8024-48737, Fax.++49-8024 -5532 - Germany Web: www.kmt-gmbh.com E-mail: info@kmt-gmbh.com SC-4/M User manual 4-channel measuring amplifier
More informationDIGEM f 96 x 48 EK. Applications. Description
3-349-002-03 1/7.98 Front panel dimensions: 96 x 48 mm LED display: red or green, 14 mm high Max. display range: 19 999 to + 32 765 Modular connectors for flexible use Simple adjustments at front panel
More informationTF 02 / TF 02-Ex. Head mounted temperature transmitters, FOUNDATION Fieldbus (H1), Pt 100 (RTD), thermocouples, 1 or 2 independent channels
TF 0 / TF 0-Ex Head mounted temperature transmitters, FOUNDATION Fieldbus (H), Pt 00 (RTD), thermocouples, or independent channels 0/-8.5 EN Input Resistance thermometer (,, wire circuit) Thermocouples
More informationLoad cell. Special features. Data sheet
Z6R Load cell Special features - Nominal (rated) loads: 20 kg 200 kg - Welded-on robust cover - Load cells made of rust-resistant materials - Easy to clean - Same dimensions like Z6F - Verifiable up to
More informationMX1601B R. Data Sheet. Ultra-rugged Standard Amplifier
MX1601B R Ultra-rugged Standard Amplifier Data Sheet Special features 16 individually configurable inputs (electrically isolated) Support of 60 V, 10 V, 100 mv, 20 ma or IEPE on all channels Sample rate:
More informationHigh-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals
Accessories Highquality digital indicator for panel mounting Model DI35M, with multifunction input Model DI35D, with two inputs for standard signals WIKA data sheet AC 80.03 Applications Machine building
More informationMX410B. Highly dynamic universal amplifier. Data sheet. Special features. Block diagram
MX410B Highly dynamic universal amplifier Special features - 4 individually configurable inputs (electrically isolated) - Connection of more than 5 transducer technologies - Individual sample rates up
More informationJUMO dtrans T02 Programmable 4-wire Transmitter (Smart Transmitter)
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
More informationMAGTROL. LMU Series Load Monitoring Units. LMU Data Sheet. Description. Features
MAGTROL Data Sheet Series Load Monitoring Units Features For use with full-bridge strain gauge transducers (sensitivity 0.5 to 4 mv/v) Voltage input for load summation or for individual use (without sensor)
More informationCPU. BM40, BM40PB, BM40IE Industrial amplifier. Special features. Data sheet. Block diagram
Industrial amplifier Special features - Freely configurable measurement channel with TEDS channel parameterization - Connection of 7 transducer technologies with a 19.2 KHz sample rate - Accuracy class
More informationm/min Digital panel meter with 4½-digit PV4, PT4, PF4, PW4 galvanically insulated 8 free scalable setpoints/hysteresis optical setpoint indication
P m/min Digital panel meter with 4½digit PV4, PT4, PF4, PW4 galvanically insulated free scalable setpoints/hysteresis optical setpoint indication analog galvanically insulated sens supply galvanically
More informationn Measuring range ,02 N m to N m n Clockwise and counter-clockwise torque n Low linearity deviation of ± 0.05 % F.S.
Precision Torque Sensor Non-contact transmission for rotating applications Optional measurement of angle and speed Model 8661 Code: Delivery: Warranty: 2-3 weeks 24 months Application The 8661 precision
More informationIndicomp 2, Indicomp 2-Ex. Indicator and alarm signalling unit 10/ EN
Indicator and alarm signalling unit 10/30-2.10 EN Dimensions 36 mm x 144 mm Can either stand vertically or lie horizontally Comprehensively explosion-protected Robust moving-coil system Contactless alarm
More informationomnigrad T - TSM 480, TR 480. Technical Information. RTD Temperature Sensor Hygienic design TSM 480 with electronics programmable via PC
Technical Information omnigrad T - TSM 480, TR 480 RTD Temperature Sensor Hygienic design TSM 480 with electronics programmable via PC Application areas The onmigrad T easytemp TSM 480 and TR 480 thermometers
More informationARD154. DIN rail mountable amplifier for strain gage sensors. User s guide. User s guide ARD CONNECTING 4-WIRE SENSORS
6. CONNECTING 4-WIRE SENSORS Connections : S+ connected to module A+ S- connected to module A- Shield connected to A- or to GND of analog output Nota: A- and GND are connected together inside the module.
More informationJUMO Wtrans Receiver with Wireless Data Transmission
Data Sheet 902931 Page 1/10 JUMO Wtrans Receiver with Wireless Data Transmission k For measuring temperature, pressure, potentiometer, and voltage. k Interface RS485 with Modbus protocol k Wireless measured
More informationOperating Manual * * Differential pressure transmitter. Table of Contents. 1 Safety guidelines. 1.1 General Information
*09005137* BA_EN_DE50 Rev.A 11/12 *09005137* d e v e l o p i n g s o l u t i o n s DE50 Operating Manual Differential pressure transmitter Table of Contents 1 Safety guidelines 2 Application purpose 3
More informationTerms and expressions for specifying torque transducers
Terms and expressions for specifying torque transducers Terms and expressions for specifying torque transducers Metrological properties of the torque measuring system Accuracy class The accuracy class
More informationEDS-400A COMPACT RECORDER. New KYOWA ELECTRONIC INSTRUMENTS CO., LTD.
KYOWA ELECTRONIC INSTRUMENTS CO., LTD. COMPACT RECORDER EDS-400A Compact Dynamic Strain Recorder Entering the scene in advanced measurement of strain, vibration, pressure, load, etc. New www.kyowa-ei.co.jp
More informationTop-Innovator MotorAnalyzer 2. Multi-purpose testers for electric motors and windings. Made in Germany Expect more.
Top-Innovator 2014 MotorAnalyzer 2 Multi-purpose testers for electric motors and windings Made in Germany Expect more. EN Winding testers 1 The MotorAnalyzer 2 unbeatably versatile The all-purpose MotorAnalyzer
More informationSingle point load cell
PW15AH Single point load cell Special features - Nominal load 10 kg... 100 kg - Stainless steel - High ratio of minimum verification interval Y - Industrial Footprint (SP4M) - Degree of Protection IP68;
More informationPortable Multi-Channel Recorder Model DAS240-BAT
Data Sheet Portable Multi-Channel Recorder The DAS240-BAT measures parameters commonly found in process applications including voltage, temperature, current, resistance, frequency and pulse. It includes
More informationRTD Temperature Sensor omnigrad T -TSM 480, TR 480. Hygienic RTD sensor with Pt 100, class A TSM 480 with electronics programmable via PC
Technical Information TI 273T/02/en 60021667 RTD Temperature Sensor omnigrad T -TSM 480, TR 480 Hygienic RTD sensor with Pt 100, class A TSM 480 with electronics programmable via PC Application The Omingrad
More informationMultifunction Calibrator - Model 8080
.. Multifunction Calibrator - Model 8080 Current Calibrator to 20 A Voltage Calibrator to 1000 V Power Calibrator to 2400 W Exceptional Uncertainties Extremely User Friendly NIST Traceable Description
More informationcontrol & display PROGRAMMABLE SENSOR CONTROLLER COMPLETE VERSATILITY OF SENSOR MANAGEMENT & DATA COMMUNICATIONS
S E N S O R S PROGRAMMABLE SENSOR CONTROLLER TX9044 COMPLETE VERSATILITY OF SENSOR MANAGEMENT & DATA COMMUNICATIONS Analogue sensors, temperature devices, frequency inputs and digital sensors direct fingertip
More informationv v PMA With numerous functions and robust construction, the KS 3930 A/B line recorders are ideal for universal industrial applications.
v v PMA Line recorder KS 3930 A KS 3930 B Galvanically isolated input channels for simple connection Measuring and recording range freely configurable Maintenance-free recording system Universal cassette
More information5.5 SLG 75. Read/Write Devices Read/Write Antennas
5.5 SLG 75 Application area SLG 75 The SLG 75 ANT is a read/write device in the middle of the performance range. It can only be used with ANT 1, ANT 12, ANT 18 and ANT 30. The antennas can be very easily
More informationProcess displays For standard signals, temperature, resistance measurement
Features Inputs: Voltage ±10 V, ±200 V / Current ±20 ma / thermocouples J,K,T,N,Pt100,Pt1000 / resistance measurement / potentiometer Display range can be linearised Two limits output Min, Max functions
More informationDigital Controller Intelligent, User-friendly Digital Controller and Programmer Controlled with ease with a support software which is input via the communication jack on the front panel. Minute adjustment
More informationCalibration with Strain gauge and bridge measurements
Calibration with Strain gauge and bridge measurements Whitepaper January 2015 Martin Riedel Whoever is testing, expects their measurements to be precise and accurate. Thus, the value given by the measurement
More informationModule Input type Ranges TEDS Filters (LP = lowpass, HP = highpass) Piezoresistive bridge ±0.5 to mv/ma 1 ma exc
HSI Series Modules Selection Guide HSI Series Modules Single channel High bandwidth - for dynamic signals Isolation (all models Analog signal output (±5 V Single channel modularity For DEWETRON systems
More informationMP85A/ MP85ADP. FASTpress. Data Sheet. Special features MP85A / MP85ADP. B en
MP85A/ MP85ADP FASTpress Data Sheet Special features 100% quality control of the production process Powerful algorithms for monitoring fitting, testing and press fitting processes Universal twin channel
More informationElectronic Thermostat TE-1 Version according to EN
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 3639 Fulda, Germany Postal address: 3635 Fulda, Germany Phone: +49 661 63- Fax: +49 661 63-67 e-mail: mail@jumo.net Internet: www.jumo.net JUMO
More informationCatalog of CLA force and torque sensors
Catalog of CLA force and torque sensors SC-002 LC-01 LC-10 TSF-000 TSF-05 TSF-1 TSF-100 Micro-force sensor Force sensor Micro-torque sensor Torque sensor Phone +41 32 421 44 90, Fax +41 32 421 44 91, ventes@cla.ch,
More informationSpecifications. Measuring Amplifier System. MGCplus. B en
Specifications Measuring Amplifier System MGCplus System devices Mains supply NT030 Supply voltage Max. power consumption Input frequency Start up current V AC W A 85 264 170 40 65
More informationUser Manual AED9501A. Digital Transducer Electronics Basic device CANOpen/DeviceNet. I en
User Manual Digital Transducer Electronics Basic device CANOpen/DeviceNet I2331-1.2 en Table of content Content Content......................................................................... 1 Typographical
More informationDigital Indicator DS 96/48 PK
Data Sheet 10/33-2.1-EN Digital Indicator DS 9/48 P Digital Indicator DS 9/48 PK Inputs Direct current, direct voltage Thermocouple Resistance thermometer Programmable via front keys or PC software Limit
More informationMA-UNI. Universal Measuring Amplifier Patent No User Manual
MA-UNI Universal Measuring Amplifier Patent No. 196 52 293 User Manual Contents Contents 1 Overview 5 1.1 Introduction 5 1.1.1 General 5 1.1.2 Fields of Application 7 1.1.3 Parameters 7 1.2 BMC Messsysteme
More informationhigh accuracy tester-calibrator PJ 6301
high accuracy testercalibrator PJ 6301 PJ6301 is a highaccuracy instrument: ± 0.005% with 600,000 measuring counts on voltage and current ranges; for thermocouple and for RTD measurement resolution. Simultaneous
More informationZ6... Data Sheet. Load cell. Special features. Dimensions (in mm; 1 mm = inches) B en 1
Z6... Load cell ata Sheet Special features - Welded on metal bellows - Nominal (rated) loads: 5 kg 1 t - Load cells and installation aids made of rust resistant materials - Verifiable up to 6000 parts,
More information