MODEL: SC110. Single Loop Controller Series. MULTI-FUNCTION PID CONTROLLER (color LCD with touch-panel, MV output backup) MODEL: SC110 [1]0 [2][3]

Size: px

Start display at page:

Download "MODEL: SC110. Single Loop Controller Series. MULTI-FUNCTION PID CONTROLLER (color LCD with touch-panel, MV output backup) MODEL: SC110 [1]0 [2][3]"

Augusta Rose
5 years ago
Views:

1 MODEL: S0 Single Loop ontroller Series MULTI-FUNTION PID ONTROLLER (color LD with touch-panel, MV output backup) 44 (5.67) 7 (.8) mm (inch) *Selectable with option code MODEL: S0[]0[][] ORDERING INFORMTION ode number: S0-[]0-[][] Specify a code from below for each [] through []. (e.g. S0-0-M//M/E//T/Q) Specify the specification for option code /Q (e.g. /0/S0) [] DISRETE OUTPUT : Relay contact : Photo MOSFET relay MODUS 0:None [] POWER INPUT Power M: 00 V (Operational voltage range V, 50/60 Hz) D Power R: 4 V D (Operational voltage range 4 V ±0 %, ripple 0 %p-p max.) [] OPTIONS (multiple selections) Housing Depth (must be specified) /0: 0 mm (Discontinued, select /) /0: 0 mm (Discontinued, select /4) /600: 600 mm (Discontinued, select /6) /: 0 mm /4: 0 mm /6: 600 mm ackup Module Power Supply * blank: Single supply /M: 00 V (dual supply) (Operational voltage range V ; 50/60 Hz) /R: 4 V D (dual supply) (Operational voltage range 4 V D ±0 %; ripple 0 %p-p max.) ontrol/ackup modules are powered from common terminals with 'single' supply type; powered from independent terminals with 'dual' supply type. Language blank: Japanese /E: English (Language (Japanese or English) can be chosen by front panel setting.) onfigurator Interface blank: Infrared /: Stereo jack (If external noise interference is a concern, stereo jack type is recommended.) Terminal block blank: One block terminal /T: Separable terminal Other Options blank: none /Q: Option other than the above (specify the specification) SPEIFITIONS OF OPTION: Q (multiple selections) OTING (For the detail, refer to M-System's web site.) /0: Silicone coating /0: Polyurethane coating /0: Rubber coating TERMINL SREW MTERIL /S0: Stainless steel FUNTIONS & FETURES Functions & Features olor LD with touch panel Four Operation views (digital display, bargraph, dual-loop bargraph and short trend views) Enhanced screen functions for engineering (configuration, programming and tuning views) Universal input x points, analog input x 4 points, discrete input x 6 points, pulse input x 5 points, high speed pulse input x point urrent output (4-0 m) x points, voltage output (-5 V) x points, relay or photo-mosfet relay output x 5 points RUN output (relay) x point omputation cycle selectable between 50 msec. and sec. (control cycle selectable between and 64 times of the computation cycle) Two PID function blocks S0 SPEIFITIONS ES-69 Rev.5 Page /

2 MODEL: S0 dvanced computation and sequence control functions uto-tuning function Parameter input and changing with touch panel Function parameter setting, list printing and data downloading/uploading available with Loop onfiguration uilder Software (model: SFEWE) Display parameter setting, saving and transfer with P onfigurator Software (model: SFG) ackup module incorporated for manual loading: MV output is automatically switched to manual control in case of control module abnormality Independent power supply usable for the manual loader ontrol module can be extracted at the front for replacement while MV output is maintained Selectable housing depth for ease of using existing wires in replacement: 0 mm, 0 mm and 600 mm Separable terminal block Typical pplications Replacement of conventional controllers Panel operation for small-scale instrumentation RELTED PRODUTS P onfigurator cable (model: OP-US) Loop configuration builder software (model: SFEWE Ver.. or later) Infrared communication adaptor (model: OP-IRD) P configurator software (model: SFG Ver..50 or later) uilder software and configurator software are downloadable at M-System s web site. ESSORIES Precision resistor module (model: REM4): old junction sensor: Mounting brackets: onnector adapter: (included in Stereo jack type. The jack on the unit and the plug of P onfigurator cable (not included in the product) are different in size.) GENERL SPEIFITIONS onstruction: Panel flush mounting Degree of protection: IP55; applicable to the front panel for single unit mounted according to the specified panel cutout onnection Terminal screws: M.5 screw terminals (torque.0 N m) Terminal fixing screws: M4 screw terminals (torque. N m) ackup module power supply terminal (option /M, /R): Euro terminal block (wire dia..4 max., mm, stripped length 0 mm) Screw terminal Terminal screws: Nickel-plated steel (standard) or stainless steel Terminal fixing screws: hrome-plated steel Housing material: Flame-resistant resin (gray), steel : Pv to Pv to supply output to i or i or i or i4 to Di or Di or Di or Di4 or Di5 or Pi or Pi or Pi or Pi4 or Pi5 to Di6 or Pi6 to Mv to Mv or Mv to o or o to Do to Do to Do to Do4 to Do5 to Do6 to power to backup module power to FG PID control: Single loop, cascade, advanced Proportional band (P): to 000 % Integral time (I): 0.0 to 00 minutes Derivative time (D): 0.0 to 0 minutes uto-tuning: Limit cycle method larm: PV high & low, deviation, rate of change omputation: 48 functions blocks available for arithmetic operations, time functions, signal selection, limit, alarm and other functions Sequence operation: Logic sequence and step sequence (max. 068 commands) omputation cycle: 50 msec. to sec. (control cycle selectable among,, 4, 8, 6, and 64 times of the computation cycle) MV output range: -5-5 % Parameter setting: With touch panel or P (Loop onfiguration uilder Software model: SFEWE) Self diagnostics: PU monitoring with a watchdog timer RUN contact: OFF in error detected by diagnostic Infrared communication: Transmission distance max. 0. meter (for use with the OP-IRD) Display Display device: 4.-inch TFT LD Display colors: 56 Resolution: pixels Pixel pitch: mm (8 8 DPI) acklight: LED acklight life: pprox hours (at 50 % brightness) Note: The backlight can be replaced in M-System factory. The LD must be replaced at the same time. Screen saver standby time: to 99 minutes Scaling range: -00 to 00 Decimal point position: 0 -, 0 -, 0 -, 0-4, 0-5 or none Scale divisions: to 0 Engineering unit indication: Max. 8 characters uto/man indicator: Green/mber LED ackup mode MV output setting indicator: lue LED MV output setting indicator: lue LED S0 SPEIFITIONS ES-69 Rev.5 Page /

3 MODEL: S0 FTORY DEFULT LOOP i LOOP 5 V D i 5 V D * * Pv 5 V D Pv S PID P : 00% I : No integral action D : No derivative action *. Factory default setting Use Loop onfiguration uilder Software (model: SFEWE) to modify setting. H G0 L Reverse ction Mv (PV /MV ) * 5 V D S PID SUPPLY OUTPUT voltage: 4 V D ±0 % with no load 8 V D min. at 0 m urrent rating: m D Shortcircuit protection urrent limited: pprox. m 4 0 m D H L G0 L Reverse ction Mv (PV /MV ) * 4 0 m D SEQ G8 L P : 00% I : No integral action D : No derivative action L SEQ G8 INPUT SPEIFITIONS Pv, Pv (universal input) urrent input: 4 0 m D with input resistance 50 Ω (REM4) Voltage input: -0 0 V D - V D 0 0 V D 5 V D 0 V D Input resistance: MΩ Thermocouple input: K, E, J, T,, R, S,, N, U, L, P, PR Input resistance: kω urnout sensing: 0. µ urnout indication: 5 % of the measuring range (upscale) RTD input: Pt00 (JIS 97, IE), Pt00 (JIS 89), JPt00 (JIS 89), Pt50Ω (JIS 8), Ni00 Maximum lead wire resistance: 00 Ω per wire urnout indication: 5 % of the measuring range (upscale) L4 Sensing current: m Potentiometer input: Total resistance 00 Ω to 0 kω Minimum span: 50 % of total resistance Excitation: 0.6 V D i, i, i, i4 Voltage input: 5 V D Input resistance: MΩ Pi, Pi, Pi, Pi4, Pi5: Dry contact (Di through Di5 are assigned to the same terminals respectively.) Maximum frequency: 0 Hz Minimum pulse width: 5 msec. ommon: Negative common per 5 points Sensing: pprox. V D, 6 m ON voltage/resistance:.5 V,.5 kω OFF voltage/resistance:.5 V 5 kω Pi6: Dry contact (Di6 is assigned to the same terminal.) Maximum frequency: 0 khz Minimum pulse width: 0.05 msec. ommon: Negative common Sensing: pprox. V D, m ON voltage/resistance: V,.5 kω OFF voltage/resistance: V, 5 kω Excitation: V D ±0%, 5 m urrent limiting circuit: pprox. m Di, Di, Di, Di4, Di5: Dry contact (Pi through Pi5 are assigned to the same terminals respectively.) ommon: Negative common per 5 points Sensing: pprox. V D, 6 m ON voltage/resistance:.5 V,.5 kω OFF voltage/resistance:.5 V 5 kω Di6: Dry contact (Pi6 is assigned to the same terminal.) ommon: Negative common Sensing: pprox. V D, m ON voltage/resistance: V,.5 kω OFF voltage/resistance: V, 5 kω [Table (Thermocouple input)] T/ USLE RNGE ( ) ONFORMNE RNGE ( ) K () -7 to to 70 E (R) -7 to to 000 J (I) -60 to 0-80 to 00 T () -7 to to 0 (RH) 4 to to 760 R -00 to to 760 S -00 to to 760 (WRe 5-6) -5 to to 5 N -7 to 0 - to 0 U -5 to to 600 L -5 to to 900 P (Platinel II) -5 to to 95 (PR) -5 to to 760 Overrange input (out of the usable range) is handled as burnout. S0 SPEIFITIONS ES-69 Rev.5 Page /

4 MODEL: S0 [Table (RTD input)] RTD USLE RNGE ( ) ONFORMNE RNGE ( ) Pt 00 (JIS 97, IE) - to to 850 Pt 00 (JIS 89) - to to 660 JPt 00 (JIS 89) -6 to to 50 Pt 50Ω (JIS 8) -6 to to 649 Ni to 5-80 to 50 Overrange input (out of the usable range) is handled as burnout. OUTPUT SPEIFITIONS Mv, Mv, Mv urrent output: 4 0 m D Load resistance: 600 Ω (Mv is the output from backup unit.) o, o Voltage output: 5 V D Load resistance: 0 kω Discrete Do, Do, Do, Do4, Do5, RUN contact (Do6): Relay contact Rated load: 50 (cos ø = ) V (resistive load) Maximum switching voltage: 50 V or V D Maximum switching power: 50 V or 60 W Minimum load: 5 V m Mechanical life: 0 7 cycles Do, Do, Do, Do4, Do5: Photo MOSFET relay Rating: 00 V (resistive load) ON resistance:. Ω Maximum frequency: 4 V, 0 m ON delay time: 5.0 msec. OFF delay time:.0 msec. INSTLLTION Power input : ontrol module 5 V at 00 V V at V ackup module 0 V at 00 V 5 V at V D ontrol module: 650 m ackup module: 50 m Operating temperature: -5 to 55 ( to F) Operating humidity: 5 to 90 %RH (non-condensing) Mounting: Panel flush mounting (high-density mounting in horizontal direction) Weight: pprox..0 kg (4.4 lb) for 0 mm depth type pprox..5 kg (5.5 lb) for 0 mm depth type pprox..0 kg (6.6 lb) for 600 mm depth type PERFORMNE ccuracy D input: ±0. % ± digit Thermocouple input: ± ± digit ± ± digit for, R, S, and PR RTD input: ± ± digit Potentiometer input: ±0. % ± digit D output: ±0. % Precision resistor module (REM4): ±0. % old junction compensation: ± at 5 ±0 ±4 for S, R and PR Temp. coefficient: ±0.05 %/ (±0.008 %/ F) D input: ±0.05 %/ (±0.008 %/ F) Thermocouple input: ±0.05 %/ (±0.008 %/ F) RTD input: ±0.05 %/ (±0.008 %/ F) Potentiometer input: ±0.05 %/ (±0.008 %/ F) D output: ±0.05 %/ (±0.008 %/ F) Precision resistor module (REM4): ±0.05 %/ (±0.008 %/ F) Line voltage effect: ±0. % over voltage range alendar clock accuracy: Monthly deviation minutes at 5 RM memory duration in power failure for hot start: 0 minutes assured Insulation resistance: 00 MΩ with 500 V D Dielectric strength: 500 minute (Pv or supply output to Pv or i or i or i or i4 to Di or Di or Di or Di4 or Di5 or Pi or Pi or Pi or Pi4 or Pi5 to Di6 or Pi6 to Mv to Mv or Mv or o or o to Do to Do or Do or Do4 or Do5 or Do6 to power to backup module power to FG) 500 minute (Pv to i or i or i or i4) 500 minute (Mv or Mv to o or o) 500 minute (Do to Do to Do4 to Do5 to Do6) 500 minute (Pv to supply output) STNDRDS & PPROVLS EU conformity: EM Directive EMI EN EMS EN Low Voltage Directive EN 600- Measurement ategory II (contact output) Installation ategory II (power) Pollution degree S0 SPEIFITIONS ES-69 Rev.5 Page 4/

5 MODEL: S0 Input or output to contact output asic insulation (0 V) Input or output to power - Reinforced insulation (0 V) RoHS Directive EN 5058 Protection against access to the terminal blocks: Finger protection (VDE ) EXTERNL VIEW ONTROL MODULE FRONT VIEW Infrared communication type Stereo jack type uto/man 8 uto/man olor LD with touch panel. MV output setting indicators used in the backup mode. Infrared communication port Used to communicate with P via IRD ommunication daptor (model: OP-IRD) to program and change parameters using Loop onfiguration uilder Software (model: SFEWE) or P onfigurator Software (model: SFG) 4. MV value (DOWN) button 5. cceleration button (ccelerates MV signal s changing speed by pressing simultaneously with MV value button) 6. MV value (UP) button 7. uto / Man selector 8. onfigurator jack and cap Removing the cap, the jack is able to communicate with a P via P onfigurator able (model: OP-US) to program and change parameters using Loop onfiguration uilder Software (model: SFEWE) or P onfigurator Software (model: SFG) KUP MODULE MV output setting indicators 0. onfigurator jack. MV value (UP) button. cceleration button (ccelerates MV signal s changing speed by pressing simultaneously with MV value button). MV value (DOWN) button S0 SPEIFITIONS ES-69 Rev.5 Page 5/

6 EXTERNL DIMENSIONS & TERMINL SSIGNMENTS unit: mm (inch) MODEL: S0 INFRRED OMMUNITION TYPE * KUP MODULE POWER INPUT TERMINL 75 (6.89) 0 (8.7) max. MOUNTING RKETS TERMINL OVER (.5) ONE LOK TERMINL (without option /T) 5M.5 SREW 7.6 (.) 64 (6.46) 44 (5.67) (5.4) 7 (.8) 4 (.94) * 67.5 (.66) *. Option /M, /R only *. Option /: 0 mm (.8 ) Option /4: 0 mm (5.75 ) Option /6: 600 mm (.6 ) SEPRLE TERMINL (with option /T) 5M.5 SREW 4M4 SREW FOR FIXING TERMINL 7. (.8) (5.4) 67.5 (.66) S0 SPEIFITIONS ES-69 Rev.5 Page 6/

7 MODEL: S0 STEREO JK TYPE * KUP MODULE POWER INPUT TERMINL 75 (6.89) 0 (8.7) max. MOUNTING RKETS TERMINL OVER (.5) ONE LOK TERMINL (without option /T) 5M.5 SREW 7.6 (.) 64 (6.46) 44 (5.67) Jack cap (5.4) 7 (.8) (.04) 4 (.94) * 67.5 (.66) *. Option /M, /R only *. Option /: 0 mm (.8 ) Option /4: 0 mm (5.75 ) Option /6: 600 mm (.6 ) SEPRLE TERMINL (with option /T) 5M.5 SREW 4M4 SREW FOR FIXING TERMINL 7. (.8) (5.4) 67.5 (.66) S0 SPEIFITIONS ES-69 Rev.5 Page 7/

8 MODEL: S0 MOUNTING REQUIREMENTS unit: mm PNEL UTOUT unit: mm Single mounting lustered mounting [687 (n - )] n = number of units Panel thickness. 0 aution IP55 is ensured for the front panel of the unit mounted independently to according to a panel. Test the sealing at the mounting surface once the device is installed. Set the unit on a vertical surface with its operation buttons at the lower side. Mounting in other directions may cause heat built up inside the unit and shorten its life span or degrade its performance. Ensure that there is sufficient space for ventilation inside a panel. Do not install above the devices that generate high heat such as heaters, transformers or resistors. Observe at the minimum of mm (. ) in all directions for maintenance purpose (e.g. wiring, removing or installing). S0 SPEIFITIONS ES-69 Rev.5 Page 8/

9 SHEMTI IRUITRY & ONNETION DIGRM Note: In order to improve EM performance, bond the FG terminal to ground. aution: FG terminal is NOT a protective conductor terminal. KUP MODULE POWER SUPPLY: SINGLE SUPPLY Di / Pi Di / Pi Di / Pi Di 4 / Pi 4 Di 5 / Pi 5 Di 6 / Pi 6 Pv UNIVERSL INPUT Pv UNIVERSL INPUT i i i i ackup Module 9 SENSOR EX INPUT OM WIRE TRNSMITTER P ONFIGURTOR/ UILDER SOFTWRE ontrol Module Discrete Input ircuit Sensor Excitation Input ircuit /D onverter /D onverter /D onverter Excitation Supply Infrared Port / Jack Digital omputation Display / Setting U() V() 6 FG MODEL: S0 Do Do Do Do 4 Do 5 Do 6 RUN ONTT Mv Mv o o POWER MV SETTING INDITORS Digital omputation Switch OPERTION UTTONS ackup Module Power ircuit UNIVERSL INPUT ONNETION E.G. * VOLT / URRENT R INPUT T/ RTD *. onnect input resistor module (model: REM4) for current input. *4. onnect J sensor for thermocouple input. *5. onnect input resistor module (model: REM4). J SENSOR *4 POTENTIOMETER MX MIN -Wire XMTR R *5 9 DISRETE INPUT PULSE INPUT ONNETION E.G.: Dry contact V or kω S0 SPEIFITIONS ES-69 Rev.5 Page 9/

10 MODEL: S0 KUP MODULE POWER SUPPLY: DUL SUPPLY ackup Module Di / Pi Di / Pi Di / Pi ontrol Module Discrete Input ircuit Do Do Di 4 / Pi 4 Di 5 / Pi 5 Di 6 / Pi 6 Pv UNIVERSL INPUT Pv UNIVERSL INPUT i i i SENSOR EX INPUT OM Sensor Excitation Input ircuit /D onverter /D onverter /D onverter Digital omputation U() V() Do Do 4 Do 5 Do 6 RUN ONTT Mv Mv o o POWER i 4 -WIRE TRNSMITTER P ONFIGURTOR/ UILDER SOFTWRE Excitation Supply Infrared Port / Jack Display / Setting FG 5 MV SETTING INDITORS Digital omputation Switch 6 6 FG OPERTION UTTONS ackup Module Power ircuit 60 6 U() K UP POWER V() UNIVERSL INPUT ONNETION E.G. * VOLT / URRENT R INPUT T/ RTD *. onnect input resistor module (model: REM4) for current input. *4. onnect J sensor for thermocouple input. *5. onnect input resistor module (model: REM4). J SENSOR *4 POTENTIOMETER MX MIN -Wire XMTR R *5 9 DISRETE INPUT PULSE INPUT ONNETION E.G.: Dry contact V or kω S0 SPEIFITIONS ES-69 Rev.5 Page 0/

11 MODEL: S0 SYSTEM ONFIGURTION EXMPLES SINGLE LOOP ONTROL SDE ONTROL Multi-Function PID ontroller Model: S0 Multi-Function PID ontroller Model: S0 i PV PV MV MV Flow Level Specifications are subject to change without notice. S0 SPEIFITIONS ES-69 Rev.5 Page /

MODEL: SC210. Single Loop Controller Series

MODEL: SC210. Single Loop Controller Series Single Loop ontroller Series MULTI-FUNTION PID ONTROLLER (color LD with touch-panel, output backup, Modbus/Nestus communication) 44 (5.67) 7 (.83) mm (inch) *Selectable with option code MODEL: S0-[][]-[3][4]