MODEL: 48NAV. Bargraph Indicators 48N Series. [3] MOUNTING DIRECTION V: Vertical H: Horizontal

Transcription

1 Bargraph Indicators 8N Series BARGRAP INDICATING AAR Functions & Features Displays a process variable in graphic bargraph of ED segments Provides max. alarm contact outputs ulti-color indicator IP front cover plate is easily replaced Separable terminal block (.7) (.) m /h % SET S P (.) mm (inch) ODE: 8NAV [][][][] [][] ORDERING INFORATION Code number: 8NAV-[][][][]-[][] Specify a code from below for each [] through []. (e.g. 8NAV-CV-R/CE/D/Q) Special input range (For codes Z & ) Bargraph scale (e.g. %) (See Plate. ) Specify the specification for option code /Q (e.g. /C/SET) [] AAR OUTPUT : points : points [] BAR ED COOR R: Red Y: Amber G: Green B: Blue C: ulti-color (red, orange and green), Pattern (See External View. ) C: ulti-color (red, orange and green), Pattern (See External View. ) [] OUNTING DIRECTION V: Vertical : orizontal [] INPUT Current A: ma DC (Input resistance Ω) B: ma DC (Input resistance Ω) C: ma DC (Input resistance 9 Ω) D: ma DC (Input resistance Ω) E: ma DC (Input resistance Ω) F: ma DC (Input resistance Ω) G: ma DC (Input resistance Ω) : ma DC (Input resistance. Ω) Z: Specify current (See INPUT SPECIFICATIONS) Voltage : V DC (Input resistance Ω min.) : V DC (Input resistance Ω min.) : V DC (Input resistance Ω min.) : V DC (Input resistance Ω min.) W: - + V DC (Input resistance Ω min.) W: - + V DC (Input resistance Ω min.) : Specify voltage (See INPUT SPECIFICATIONS) [] POWER INPUT AC Power : 8 V AC (Operational voltage range 8 V, 7 z) (CE not available) : V AC (Operational voltage range 8 V, 7 z) DC Power R: V DC (Operational voltage range V ± %, ripple %p-p max.) [] OPTIONS (multiple selections) Standards & Approvals blank: Without CE /CE: CE marking Bezels blank: Bezels for -System s 8 Series panel cutout /D: Bezels for DIN panel cutout /F: Bezels for Fuji Electric's PAJ, PAK, PBA panel cutout Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to -System's web site.) oving parts and indicators are not coated. 8NAV SPECIFICATIONS ES-97 Rev. Page /9

2 /C: Silicone coating /C: Polyurethane coating /C: Rubber coating EX-FACTORY SETTING /SET: Preset according to the Ordering Information Sheet (No. ESU-97) BEZE OPTION Bezels are used to adapt the 8N Series to an existing panel cutout. In order to replace -System s 8 Series products, use the one attached to the 8N Series as standard. When the existing panel is cut according to DIN standard, specify /D suffix code. For a new installation, no bezel is required. Please refer to ounting Requirement and mount the 8N directly. Ingress protection is invalid when the 8N is mounted with a bezel, or when multiple modules are stacked side by side. SPARE PARTS plate GENERA SPECIFICATIONS Construction: Panel flush mounting Degree of protection: IP; applicable to the front panel for single unit mounted according to the specified panel cutout Connection: separable screw terminal (torque. N m) Screw terminal: Nickel-plated steel ousing material: Flame-resistant resin (black) Isolation: Input to output to power Zero adjustment: - to + % (front) Span adjustment: 9 to % (front) plate: Flame resistant resin (white scale & characters on black base) Setpoint adjustment points: [ setpoint ] to % to [ setpoint] or No alarm trip points: [ setpoint] to % [ setpoint] to [ setpoint] [ setpoint] to [ setpoint] to [ setpoint] or No alarm trip Alarm deadband (hysteresis): % Setting: (Front button) Zero and span adjustments Alarm setpoint Others (Refer to the instruction manual for details) BARGRAP ED: -segment ED, mm (.9 ) long,. mm (. ) wide Display range: to (scaling function not available) : Two different scales available for single bargraph Characters: ax. characters including decimal point and negative sign : in., max. Engineering unit: ax. characters INPUT SPECIFICATIONS DC Current: ma DC; input resistor incorporated inimum span: ma When specifying a resistance value, choose from below.. Ω, Ω, Ω, Ω, 9 Ω, Ω DC Voltage: - + V DC Input resistance: Ω inimum span:. V Offset: ax.. times span OUTPUT SPECIFICATIONS Alarm Output: Relay contact Rated load: V A (cos ø = ) V A (resistive load) aximum switching voltage: V AC, V DC aximum switching power: 8 VA, W inimum load: V ma echanical life: 8 cycles (rate 8 cycles/min.) Alarm Trip Operation Alarm Output Code Output Output Input (%) Input (%) ( )ON ( )ON Terminal No. in parentheses (7 9)ON (7 8)ON Setpoint Setpoint Terminals 7 9, turn on at a loss of power. Alarm Output Code Output Output Output Output ( )ON ( )ON ( )ON (7 9)ON (7 )ON (7 8)ON Terminals 7 9, turn on at a loss of power. 8NAV SPECIFICATIONS ES-97 Rev. Page /9

3 INSTAATION Power Consumption AC: Approx. VA DC: Approx. W Operating temperature: - to + C ( to F) Operating humidity: to 9 %R (non-condensing) ounting: Panel flush mounting Weight: g (. lb) PERFORANCE in percentage of span Accuracy: ± % ± digit Temp. coefficient: ±. % of FS/ C (±.8 % of FS/ F) Response time:. sec. Insulation resistance: Ω with V DC Dielectric strength: V minute (input to output to power to ground) STANDARDS & APPROVAS EU conformity: EC Directive EI EN -- ES EN -- ow Voltage Directive EN - easurement Category II Pollution Degree Input to output to power: Reinforced insulation ( V) RoS Directive EN 8 8NAV SPECIFICATIONS ES-97 Rev. Page /9

4 SCAE PATE WAT UST BE SPECIFIED WEN ORDERING Following two methods can specify scale plate. a) Using Plate Designer Access Design Plate in the -System web site (english). plate can be designed in this web site. By function below, it can be easy to create standard design or original design. [Design Automatically] Entering inimum, aximum, and Unit allows to create automatically a scale plate. aximum created scale division number is.9. Use [Specify Division Number], if division number more than.9 is required (aximum division). [Specify Division Interval] Division Interval can be specified according to the application. [Specify Division Number] It is available to create originally with scale division number, length of line, position, character size, font and detailed position. After designing is completed, register code is issued. Place the order with this code. Once scale plate is designed, it is recorded. The register code can be used any number of times. b) Specifying scale range and display unit when placing the order It is available to create by specifying scale range and display unit for right and left. Regarding design of scale plate such as division number, length of division number line, and character font, they are same as above [Design Automatically], -System designs them. DESIGNING BY DESIGN AUTOATICAY ow Design Automatically creates scale design is described succinctly below. TYPES OF DIVISIONS Five () types of divisions are used depending upon the scale span, which determined by the following equation: n Span = (ax. range value in. range value) x where n = integer (used to limit the calculated scale span to the minimum of., below..) The number of divisions is automatically determined by the scale span. Type :. Span <. Number of divisions: to.9 : Starts at, increments by. /. / / /. in. and max. values indicated. digits including negative sign and decimal point. Division lines: ong, Short, edium, Short, ong ( divisions repeated) Type :. Span <. Number of divisions: to 9.9 : Starts at, increments by. /. / / /. in. and max. values indicated. digits including negative sign and decimal point. Division lines: ong, Short, edium, Short, edium, Short, ong ( divisions repeated) inimum aximum inimum aximum NAV SPECIFICATIONS ES-97 Rev. Page /9

5 Type :. Span <. Number of divisions: to.9 : Starts at, increments by. /. / / /. in. and max. values indicated. digits including negative sign and decimal point. Division lines: ong, Short, edium, Short, edium, Short, edium, Short, edium, Short, ong ( divisions repeated) Type :. Span <. Number of divisions: 7. to.9 : Starts at, increments by. /. / / / /. in. and max. values indicated. digits including negative sign and decimal point. Division lines: ong, edium, edium, edium, edium, ong ( divisions repeated) inimum aximum inimum aximum Type :. Span <. Number of divisions: to.9 : Starts at, increments by. /. / / /. in. and max. values indicated. digits including negative sign and decimal point. Division lines: ong, edium, edium, edium, edium, ong ( divisions repeated) [Example] : Bargraph range to cm (Type ) eft scale range: eft scale unit (bargraph): cm Right scale: None SET inimum aximum cm S Z 8NAV SPECIFICATIONS ES-97 Rev. Page /9

6 EXTERNA VIEW AAR OUTPUT CODE : points Vertical ounting orizontal ounting Setpoint SET 9 SET (ENTER) Button m /h % Setpoint Adj. & Trip Indicator (red) Z S SET 7 S Span Adj. (amber) Power Saving ode Indicator (amber) Setpoint - Z Zero Adj. (amber) Setpoint Adj. & Trip Indicator (green) - UP Button PV Indicator - - ode Selector - m /h % DOWN Button AAR OUTPUT CODE : points Vertical ounting orizontal ounting Setpoint SET 9 8 SET (ENTER) Button Setpoint Adj. & Trip Indicator (red) Setpoint Adj. & Trip Indicator (red) m /h % Z S SET Setpoint Setpoint Setpoint - 7 S Z Span Adj. (amber) Power Saving ode Indicator (amber) Zero Adj. (amber) Setpoint Adj. & Trip Indicator (green) Setpoint Adj. & Trip Indicator (green) - UP Button PV Indicator - - ode Selector - m /h % DOWN Button Bar Color Patterns Pattern (Bar ED color code C) Input < < Input < < Input red green green orange orange orange Pattern (Bar ED color code C) red green red orange green red 8NAV SPECIFICATIONS ES-97 Rev. Page /9

7 DIENSIONS unit: mm (inch) * (.) SCREWS SCREW TERINAS (.7) (.9) (.) (.) (.9) 7 (.9) 8 (.) (.7) (.) STANDARD BEZE* OPTION /D BEZE* Rounded corners for the option /D OPTION /F BEZE*.9 (.9). (.7) (.7).9 (.). (.7) (.7) 8. (.). (.7) (.7). (.) 7. (.). (.) 7. (.). (.) 7. (.) *. Space required when replacing the scale plate. *. Used for the existing panel cutout of -System 8 Series (8 9. mm). *. Used for the existing DIN panel cutout ( 8 mm) *. Used for the existing panel cutout of Fuji Electric PAJ, PAK, PBA ( 8 mm), etc. 8NAV SPECIFICATIONS ES-97 Rev. Page 7/9

8 PANE CUTOUT unit: mm SINGE OUNTING (Conform to degree of protection IP) Vertical ounting. + orizontal ounting ODE: 8NAV Panel thickness:. 8. mm min. Panel thickness:. 8. mm. +. min. CUSTERED OUNTING (Not conform to degree of protection IP) Vertical ounting orizontal ounting Panel thickness:. 8. mm = {. + (N )} (N : number of units) Note : Observe at the minimum of cm above and below the units for heat dissipation. Note : No bezel is needed when the panel is cut according to the above drawings. + min. Panel thickness:. 8. mm = {. + (N )} (N : number of units) + 8NAV SPECIFICATIONS ES-97 Rev. Page 8/9

9 SCEATIC CIRCUITRY & CONNECTION DIAGRA AAR OUTPUT CODE : points + INPUT * ow Drift Amplifier Display / Setting Digital Computation 7 c 8 a 9 b a OUTPUT b OUTPUT c U(+) V( ) POWER *Input shunt resistor incorporated for current input. AAR OUTPUT CODE : points + INPUT * ow Drift Amplifier Display / Setting Digital Computation 7 c, c 8 a OUTPUT 9 b OUTPUT a a a b OUTPUT OUTPUT c, c U(+) V( ) POWER *Input shunt resistor incorporated for current input. Relay Protection AC Powered Inductive oad (Coil) DC Powered Inductive oad (Coil) OAD Varistor or CR Circuit OAD Diode, Varistor or CR Circuit U Specifications are subject to change without notice. 8NAV SPECIFICATIONS ES-97 Rev. Page 9/9