Vectron International Filter specification TFS 400P 1/5
|
|
- Elisabeth Blankenship
- 5 years ago
- Views:
Transcription
1 Vectron International Filter specification TFS 400P /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 280 Ω -6, pf Output: 440 Ω -5,2 pf Characteristics Remark: The reference level for the relative attenuation a rel of the TFS 400P is the minimum of the pass band attenuation. This value is defined as the insertion loss a e. The nominal frequency f N is fixed at 400 MHz without any tolerance. The values of relative attenuation a rel are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. D a t a typ. value tolerance / limit Insertion loss ae =amin 0,8 db max. 3 db (reference level) Nominal frequency f N MHz Passband PB - f N ± 7,5 MHz Pass band ripple p-p 0,3 db max. db Relative attenuation arel f N... f N ± 7,5 MHz 0,5 db max. db f N ± 6 MHz... f N ± 50 MHz 45 db min. 40 db Group delay ripple within PB p-p 20 ns max. 60 ns Operating temperature range OTR C C Storage temperature range C C Temperature coefficient of frequency TCf ** -8 ppm/k - *) The terminating impedances depend on parasites and q-values of matching elements and the board used, and are to be understood as reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team. **) f c (Hz) = TC f (ppm/k) x (T - T o ) x f To (MHz). Generated: Checked / Approved:
2 Vectron International Filter specification TFS 400P 2/5 Filter characteristic 0 insertion loss: -. db magnitude in db magnitude in db delay in µs frequency in MHz frequency in MHz Construction and pin connection (All dimensions in mm) +0, 2 7, -0, +0,2 9, -0, TFS 400P X45 5,08 3 5,4 +/-0,2 Date code Input 2 Input RF Return 3 Ground 4 Ground 5 Ground 6 Output 7 Output RF Return 8 Ground 9 Ground 0 Ground 3 0,8 8 R0,2 6 2,54 Date code: Year + week X 2009 A 200 B Ω Test circuit L 6 L2 C SAW 2 7 C2 3, 4, 5, 8, 0
3 Vectron International Filter specification TFS 400P 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification:. Shock: 500g, ms, half sine wave, 3 shocks each plane; DIN IEC 68 T Vibration: 0 Hz to 500 Hz, 0,35 mm or g respectively, octave per min, 0 cycles per plan, 3 plans; DIN IEC 68 T Change of temperature: 4. Resistance to solder heat (reflow): -55 C to 25 C / 30 min. each / 0 cycles DIN IEC 68 part 2 4 Test N reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; 5. ESD ANSI/ESD S , class A for HBM This filter is RoHS compliant (2002/95/EG, 2005/68/EG) Packing Tape & Reel: IEC 286 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 2000 reel of empty components at start: min. 300 mm reel of empty components at start including leader: min. 500 mm trailer: min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 6,00 ± 0,3 Po : 4,00 ± 0, Do :,50 +0,/-0 E :,75 ± 0,0 F : 7,50 ± 0,0 G(min) : 0,60 P2 : 2,00 ± 0, P : 2,00 ± 0, D(min) :,50 +0,/-0 Ao : 7,60 ± 0,0 Bo : 9,60 ± 0,0 Ct : 3,5 t Ko Ct Do Typ Date Code PIN Marker Po D P P2 Ao Bo G G F E W W 2 Reel (all dimensions in mm) A : 330 W : 6,4 W2(max) : 22,4 N(min) : 50 C : 3,0 A C N W The minimum bending radius is 45 mm.
4 Vectron International Filter specification TFS 400P 4/5 Air reflow temperature conditions Conditions Exposure Average ramp-up rate (30 C to 27 C) less than 3 C/second > 00 C between 300 and 600 seconds > 50 C between 240 and 500 seconds > 27 C between 30 and 50 seconds Peak temperature max. 260 C Time within 5 C of actual peak temperature between 0 and 30 seconds Cool-down rate (Peak to 50 C) less than 6 C/second Time from 30 C to Peak temperature no greater than 300 seconds Temperature / C Chip-mount air reflow profile max. 260 C 27 C max. 300 s s s Time / s
5 Vectron International Filter specification TFS 400P 5/5 History Version Reason of Changes Name Date.0 - development specification Pfeiffer terminating impedances, typical values and filter characteristics added Pfeiffer
Vectron International Filter specification TFS 1227A 1/5
Vectron International Filter specification TFS 1227A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω 0 pf Output: 50 Ω 0 pf Characteristics
More informationVectron International Filter specification TFS 600 1/5
Vectron International Filter specification TFS 600 /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 270 Ω -0,8 pf Output: 285 Ω -0,8 pf Characteristics
More informationVectron International Filter specification TFS 281 1/5
Vectron International Filter specification TFS 281 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 183 Ω -12.5 pf Output: 172 Ω -12.6 pf Characteristics
More informationVectron International Filter specification TFS 737 1/5
Vectron International Filter specification TFS 737 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The
More informationVI TELEFILTER Filter specification TFS 130C 1/5
VI TELEFILTER Filter specification TFS 130C 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 130 Ω -11.6 pf Output: 86 Ω -11.8 pf Characteristics
More informationVectron International Filter specification TFS 1632A 1/5
Vectron International Filter specification TFS 1632A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 183 Ω -0,42 pf Output: 45 Ω -0,47 pf Characteristics
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 1226 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 338 Ω -1.6 pf Output: 338 Ω -1.6 pf Characteristics
More informationVectron International Filter specification TFS 1575AA 1/5
Vectron International Filter specification TFS 1575AA 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationVectron International Filter specification TFS 125P 1/5
Vectron International Filter specification TFS 125P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 115 Ω -21 pf Output: 110 Ω -35 pf Characteristics
More informationVectron International Filter specification TFS140AV 1/5
Vectron International Filter specification TFS140AV 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: * Input: 50 Ω -78 pf Output: 95 Ω -52 pf Characteristics
More informationVI TELEFILTER Filter specification TFS 915D 1/5
Filter specification TFS 915D 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The maximum attenuation
More informationVectron International Filter specification TFS 500 1/5
Vectron International Filter specification TFS 500 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 415 Ω -1 pf Output: 415 Ω -1 pf External
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 2096 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 200 Ω -0.38 pf Output: 75 Ω Characteristics
More informationVectron International Filter specification TFS 868P 1/5
Vectron International Filter specification TFS 868P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 80 Ω -1.7 pf Output: 80 Ω -1.7 pf Characteristics
More informationVectron International Filter specification TFS 243E 1/5
Vectron International Filter specification TFS 243E /5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: * Input: 350 Ω -3.8 pf Output: 350 Ω -3.8 pf Characteristics
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 1795 1/5 Measurement condition Ambient temperature: 2 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The maximum
More informationVectron International Filter specification TFS1220 1/5
Vectron International Filter specification TFS1220 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 146 Ω -0.9 pf Output: 146 Ω -0.9 pf Characteristics
More informationVI TELEFILTER Filter specification TFS 248F 1/5
VI TELEFILTER Filter specification TFS 248F 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 200 Ω Characteristics Remark: The reference
More informationVectron International Filter specification TFS 942G 1/5
Vectron International Filter specification TFS 942G 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 2653 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 27,66 Ω -0,01 pf Output: 27,66 Ω -0,01 pf
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 1575 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 2533 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: * Input: 27,22 Ω -,32 pf Output: 27,22 Ω -,32 pf Source:
More informationVI TELEFILTER Filter specification TFS /5
VI TELEFILTER Filter specification TFS 1227 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The maximum
More informationVectron International Filter specification TFS 522 1/5
Vectron International Filter specification TFS 522 1/5 Measurement condition Ambient temperature (T 0): 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationVectron International Filter specification TFS1590 1/5
Vectron International Filter specification TFS1590 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationVI TELEFILTER Filter specification TFS /5
VI TELEFILTER Filter specification TFS 2100 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The maximum
More informationVectron International Filter specification TFS 867A 1/5
Vectron International Filter specification TFS 867A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationVI TELEFILTER Filter specification TFS 70Z 1/5
VI TELEFILTER Filter specification TFS 70Z /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 850 Ω -4,5 pf Output: 490 Ω -4, pf Characteristics
More informationVectron International Filter specification TFS180L 1/5
Vectron International Filter specification TFS180L 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 205.51 Ω -23.24 pf Output: 141.63 Ω - 31.49
More informationVI TELEFILTER Filter specification TFS 230 1/5
VI TELEFILTER Filter specification TFS 230 1/5 Measurement Condition Ambient Temperature: 23 C Input Power Level: 0 dbm Terminating impedances *: for input: 1,95 kω // -5,0 pf for output: 1,67 kω // -5,3
More informationVI TELEFILTER Preliminary specification TFS 1575N 1/5
VI TELEFILTER Preliminary specification TFS 1575N 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The
More informationVectron International Filter specification TFS 400L 1/5
Vectron International Filter specification TFS 400L 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 200 Ω Output: 200 Ω Characteristics Remark:
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 1960 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationVectron International Filter specification TFS 869K 1/5
Vectron International Filter specification TFS 869K 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationVectron International Filter specification TFS1255A 1/5
Vectron International Filter specification TFS1255A 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: m Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
More informationVectron International Filter specification TFS1575AG 1/5
Vectron International Filter specification TFS1575AG 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark:
More informationVectron International Filter specification TFS455D 1/5
Vectron International Filter specification TFS455D 1/5 Measurement condition Ambient temperature To: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
More informationVI TELEFILTER Filter specification TFS /5
VI TELEFILTER Filter specification TFS 188 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedances for input: 5 Ω for output: 5 Ω Characteristics Remark: The maximum
More informationVectron International Filter specification TFS246R 1/5
Vectron International Filter specification TFS26R 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances*): input: 695 Ω -1.9 pf output: 695 Ω -1.9 pf Characteristics
More informationVectron International Filter specification TFS 121 1/5
Vectron International Filter specification TFS 121 1/ Measurement condition Ambient temperature: 23 Input power level: 0 dbm Terminating impedance: * Input: 130 Ω II 1,7 pf Output: 130 Ω II 1,7 pf Characteristics
More informationVectron International Resonator Specification TFR 832 1/5
Vectron International Resonator Specification TFR 832 1/5 Measurement condition Ambient temperature: 25 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationVectron International Diplexer specification TDX1227 1/7
Vectron International Diplexer specification TDX1227 1/7 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: 50 Ohm (all ports) Characteristics D a t a L
More informationVectron International Temperatur sensor specification TFSS434B 1/6
Vectron International Temperatur sensor specification TFSS434B 1/6 Measurement condition Ambient temperature: 85 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics
More informationVectron International Temperatur sensor specification TFSS433D 1/6
Vectron International Temperatur sensor specification TFSS433D 1/6 Measurement condition Ambient temperature: 85 C Input power level: 0 dbm Terminating impedance: Input: 50 Output: 50 Characteristics Remark:
More informationTELEFILTER Filter Specification TFS 141 C 1/5
TELEFILTER Filter Specification TFS 4 C /5 Measurement condition Ambient Temperature: 23 C Input Power Level: 0 dbm Terminating Impedance at fc*: input:,25 kω // -9,4 pf output:,36 kω // -9,9 pf Characteristics
More informationTfs248e.doc version VI TELEFILTER Filter specification TFS 248 E 1/5. D a t a typ. Value Limit
Filter specification TFS 248 E 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances at f c *) Input: 560 Ω -5.9pF Characteristics Output: 500 Ω -6.3 pf Remark:
More informationVI TELEFILTER Filter Specification TFS 211 C 1/5
Filename: tfs211c.doc version 3.0 23.01.2002 Filter Specification TFS 211 C 1/5 Measurement condition Ambient temperature: 20... 25 C Input power level: 5 ± 2 dbm terminating impedances * Input: 1,1 kω
More informationVI TELEFILTER Filter Specification TFS 246 H4 1/5
Filter Specification TFS 246 H4 1/5 Measurement condition Ambient temperature: 2 C Input power level: 0 dbm Terminating impedances *) Input: 490 Ω -2.62 pf Output: 490 Ω -2.62 pf External coil: 270 nh
More informationVI TELEFILTER Filter Specification TFS 70U - 1/5
Filter Specification TFS 70U - 1/5 1. Measurement condition : Ambient temperature T A: 23 C. Input power level: 0 dbm. Terminating impedances in f c : for input: 50 Ω 0 pf. for output: 50 Ω 0 pf. 2. Characteristics
More informationVI TELEFILTER Resonator specification TFR 868D 1/5
VI TELEFILTER Resonator specification TFR 868D 1/5 Measurement condition Ambient temperature: 25 C Input power level: 0 dbm Terminating impedance * for input: 50Ω for output: 50Ω Characteristics Remark:
More informationSAW BANDPASS FILTER. ACT PART NO.: ACTF9201_2535MHz_DCC6C
SAW BANDPASS FILTER ACT PART NO.: ACTF9201_2535MHz_DCC6C Product Type: SAW Filter Part NO.: Customer: Customer Part NO.: ACTF9201_2535MHz_DCC6C Issued Date: PREPARED BY CHECKED BY APPROVED BY Features
More informationSAW Components Data Sheet K 6265 K
Standard B/G D/K M/N Plastic package DIP10K Features TV IF filter switchable from M/N mode to D/K mode M/N mode with Nyquist slope and sound shelf at 33,50 MHz Constant group delay D/K mode with Nyquist
More informationDifferential Input / Output Impedance Match SM X 5 mm Nominal Footprint Lid Symbolization (YY=year, WW=week, S=shift) 15 pf
SF1189B-1 Designed for WLAN IF Applications Low Insertion Loss 5.0 x 5.0 x 1.7 mm Suface-Mount Case Single Ended or Differential Input and Output Differential Output Complies with Directive 2002/95/EC
More informationSAW Bandpass Filter F2G12
SAW Bandpass Filter FG Features WCDMA applications Usable bandwidth of 60 MHz No impedance matching require for operation at 50 Ω Ceramic Surface Mounted Device Package (.0 mm *.0 mm ) Singleended Operation
More informationSAW Components Data Sheet B4926
Features Low-loss IF filter for mobile telephone Channel selection in GSM systems Hermetically sealed ceramic SMD package Balanced and unbalanced operation possible No coupling coil required Terminals
More informationSAW Components Data Sheet K 9456 M
Standard B/G D/K I L/L Plastic package SIP5K Features TV IF audio filter with two channels Channel 1 (L ) with one pass band for sound carriers at 40,40 MHz (L ) and 39,75 MHz (L - NICAM) Channel 2 (B/G,D/K,L,I)
More informationACTR Features: ACTR DCC6C v1.1
Features: ACTR9028-934.6-DCC6C v1.1 1-port Resonator Provides reliable, fundamental mode, quartz frequency stabilization i.e. in transmitters or local oscillators Surface Mounted Technology (SMT) Lead-free
More informationSAW Bandpass Filter F4521
Features RF bandpass filter for CDMA0 CBand Tx. Part Usable bandwidth MHz (0 MHz ~ MHz) High attenuation No matching 0Ω singleended operation Ceramic Surface Mounted Device Package (.8 mm.8 mm ) RoHS compliant
More informationVS-701 High Shock Discrete Voltage Controlled SAW Oscillator
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator VS-701 The VS-701 VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
More informationPART NUMBER: ACTR MHz-DCC6C-75kHz-v1.1 Frequency: MHz
PART NUMBER: ACTR3028-315MHz-DCC6C-75kHz-v1.1 Frequency: 315.000MHz Features 1-port Resonator Provides reliable, fundamental mode, quartz Frequency stabilization i.e. in transmitters or local oscillators
More informationC MHz 52 MHz
Typical Applications PCS Base Stations Land Mobile Radio Cellular Telephony Radio in the Local Loop Frequency range Standard frequencies Features EFC Standard Low Profile Small Size 100 % RoHS compliant
More informationVT-841 VT-841. Temperature Compensated Crystal Oscillator. Description. Applications. Features. Block Diagram. Output V DD.
VT-841 Temperature Compensated Crystal Oscillator VT-841 Description Vectron s VT-841 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output, analog temperature
More informationRakon Product Proposal
RTX5032A -- SMD Temperature Compensated Crystal Oscillator -- -- High performance TCXO offering excellent Phase Noise, Frequency Stability and VCO tilt compensation. -- Product description -- The RTX5032A
More informationAPPROVAL SHEET. Issued Date Dept. R&D R&D QM. Name JungHwan, Park Namjun, Kim Juwon, Park
APPROVAL SHEET ITEM Model Name SAW FILTER Issued Date 2017.05.23 Revision No 2 Dept. Prepared by Confirmed by Approved by Customer Name Sign. Dept. R&D R&D QM Inc. Name JungHwan, Park Namjun, Kim Juwon,
More informationRakon Product Proposal
RS1490P XO `Tiger' SMD Clock Oscillator Series High Performance PLL Crystal Clock Oscillator. Product description This PLL XO offers ultra low RMS phase jitter and high frequency stability in an industry
More informationTeccor brand Protection Thyristors Surface Mount
Q2L Series (C-Rated) SIDACtor SLIC Device The Q2L SIDACtor SLIC series provides unidirectional transient voltage protection in a low profile, Chip Scale Package (CSP). The small package QFN (Quad Flatpak
More informationCLA LF: Surface Mount Limiter Diode
DATA SHEET CLA4610-085LF: Surface Mount Limiter Diode Applications Low-loss, high-power limiters Receiver protectors Anode (Pin 1) Anode (Pin 3) Features Low thermal resistance: 73 C/W Typical threshold
More information- 01DB = 1dB, - 02DB = 2dB, - 03DB = 3dB, - 04DB = 4dB, - 05DB = 5dB, - 06DB = 6dB, - 07DB = 7dB, - 08DB = 8dB, - 09DB = 9dB, - 10DB = 10dB
AT02M750.06 - Page 1 of 14 Product Family: Part Number Series: Temperature Variable Attenuators ATV0805C Series Construction: High purity Alumina Substrate Thermo-sensitive thermistor Ni alloy thin-film
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE. AEC-Q200 qualified
Spec. No.: RBX K HTS-1 /2 Date: 217. 4. 21 Data sheet Title: Style: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE RBX16,2,32,35 AEC-Q2 qualified RoHS COMPLIANCE ITEM Halogen
More information- 01DB = 1dB, - 02DB = 2dB, - 03DB = 3dB, - 04DB = 4dB, - 05DB = 5dB, - 06DB = 6dB
AT02M750.08 - Rev A - Page 1 of 10 Product Family: Part Number Series: Temperature Variable Attenuators ATV0805J Series (10GHz) Construction: High purity Alumina Substrate Thermo-sensitive thermistor Ni
More informationData sheet. FIXED RECTANGULAR TYPE RMC10,16,20,32,35 Automotive Grade AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: RMC-1K-17N1011 /1 Date: 2017. 11. 28 Data sheet Title: Style: FIXED RECTANGULAR TYPE RMC10,16,20,32,35 Automotive Grade AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free Note:
More informationPin Configuration. Surface Mount 7.00 x 5.50 x 1.24 mm
Features For WiBro and WiMAX applications Usable bandwidth 10 MHz High attenuation operation 200 Ω Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pbfree Pb 6 MHz SAW Filter Package
More informationData Sheet. ACMD-7409 Miniature PCS Band Duplexer. Features. Description. Specifications. Applications. Functional Block Diagram
ACMD-749 Miniature PCS Band Duplexer Data Sheet Description The Avago ACMD-749 is a miniature duplexer designed for US PCS handsets. The ACMD-749 is designed with Avago Technologies Film Bulk Acoustic
More informationVS-800 Ultra-Low Jitter High Frequency VCSO
VS-800 Ultra-Low Jitter High Frequency VCSO VS-800 Description The VS-800 is a Voltage Controlled SAW Oscillator that operates at the fundamental frequency of the internal SAW resonator. The SAW resonator
More informationApplications impedance matching balanced to unbalanced transformation push-pull amplifier. FREQUENCY (MHz) 1 db MHz
Surface Mount RF Transformer 50Ω 3 to 300 MHz Maximum Ratings Operating Temperature -20 C to 85 C Storage Temperature -55 C to 100 C RF Power 0.25W DC Current Pin Connections 30mA Permanent damage may
More informationSAW Components Data Sheet B3750
Features Ceramic package QCC8C RF low-loss filter for remote control receivers Package for Surface Mounted Technology (SMT) Balanced and unbalanced operation possible Passivation layer: Protec Terminals
More informationModel PD0409J7575S2HF
Model PD49J77SHF Ultra Low Profile 8 Power Divider 7Ω to 7Ω Description The PD49J77SHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49J77SHF is
More informationModel PD3150J5050S2HF
Model PD315J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD315J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD315J55S2HF
More informationModel PD0409J5050S2HF
Model PD49JSHF Ultra Low Profile 8 Power Divider Ω to Ω Description The PD49JSHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49JSHF is ideal for
More informationTCP-3182H. 8.2 pf Passive Tunable Integrated Circuits (PTIC)
TCP-3182H 8.2 pf Passive Tunable Integrated Circuits (PTIC) Introduction ON Semiconductor s PTICs have excellent RF performance and power consumption, making them suitable for any mobile handset or radio
More informationRMC10,16,20,32,35,50,63 Automotive Grade Page: 1/10
+5 C +35 C 75% Product specification contained in this data sheet are subject to change at any time without notice If you have any questions or a Purchasing Specification for any quality Agreement is necessary,
More informationModel PD2328J5050S2HF
Model PD2328J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD2328J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD2328J55S2HF
More informationSAW Components. Low-Loss Filter for Mobile Communication. RF360 Europe GmbH. A Qualcomm TDK Joint Venture. Data Sheet B4926.
RF360 Europe GmbH A Qualcomm TDK Joint Venture Series/type: Ordering code: Date: Apr 02, 2003 Version: RF360 products mentioned within this document are offered by RF360 Europe GmbH and other subsidiaries
More informationPreliminary. 2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Frequency 8 to 1500 MHz 2.2 Operating Temperature Range
RXO5032P SMD Clock Oscillator () High Performance XO in 5 x 3.2 mm Surface Mount package Product description The RXO5032P XO combines very low RMS phase jitter and tight frequency stability in a small
More informationTypical Applications Base Stations Test Equipment Synthesizers. Frequency stabilities 1 [Standard]
PX-701 Clock Oscillator Features Reflow Process Compatible Surface Mount Package AT-Cut Crystal SONET Minimum Clock Specification Low Phase Noise Tight Tolerances Typical Applications Base Stations Test
More informationStop Band Rejection Loss F4 - F db F db 1
Ceramic Low Pass Filter 50Ω Applications DC 1 to 990 MHz Features Low loss, 0.4 db typ. Small size 0805 (2.0 x 1.25 mm) Temperature stable LTCC construction Harmonic Rejection VHF/UHF transmitters / receivers
More informationPS-701 SAW Oscillator
PS-701 SAW Oscillator PS-701 The PS-701 SO (Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support high speed data converters and 100G / 400G coherent optical
More informationMICRO INDUCTORS. Features. Applications. Ordering Information. Shape and Dimensions MI - I J J T (1) (2) (3) (4) (5) (6) (7)
MICRO INDUCTORS Features 1. Very high Self-Resonant Frequencies 2. Ultra miniature size and light(0.6mm mm mm). No polarity 4. Terminal electrode has excellent solder heat resistance for soldering. 5.
More informationMX-503 High Precision Microprocessor Controlled Crystal Oscillator
MX-503 High Precision Microprocessor Controlled Crystal Oscillator MX-503 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-50
More information- 01dB = 1dB, - 02dB = 2dB, - 03dB = 3dB, - 04dB = 4dB, - 05dB = 5dB, - 06dB = 6dB, - 07dB = 7dB, - 08dB = 8dB, - 09dB = 9dB, - 10dB = 10dB
AT02M0.09 - Page 1 of 13 Product Family: Part Number Series: Temperature Variable Attenuators ATV112F Series Construction: High purity Alumina Substrate Thermo-sensitive thermistor Ni alloy thin-film resistive
More informationFeatures wide bandwidth 10 to 3000 MHz balanced transmission line excellent return loss aqueous washable patent pending
Surface Mount top hat RF Transformer 50Ω 10 to 3000 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C RF Power 0.4W DC Current 30mA Permanent damage may occur if
More informationC
Typical Applications Base Stations Test Equipment Synthesizers Digital Switching Features Surface Mount Package Optional Reflow Process Compatible Optional AT-Cut and SC-Cut Crystal Options Low Profile
More informationModel BD3238N5050AHF. Ultra Low Profile 0404 Balun
Model BD338N55AHF Ultra Low Profile 44 Balun 5Ω to 5Ω Balanced Description The BD338N55AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and
More informationISA-PLAN // Precision resistors. SMT // Size Features
Features 5 W power rating at 05 C Constant current up to 35 A (4 mohm) excellent long-term stability High pulse power rating Mounting: Reflow-, and IR-soldering AEC-Q200 qualified rohs 20/65/EU compliant
More informationC5310. Tight Stability. 1 MHz 700 MHz
Typical Applications Base Stations Test Equipment Switching Portable Equipment Frequency range Standard frequencies Features Surface Mount Package Reflow Process Compatible AT-Cut Crystal Low Phase Noise
More informationDynamic Engineers Inc.
Features and Benefits Standard and custom frequencies up to 2100 MHz Femto-second (f sec.) RMS phase jitter Short lead time Typical Applications Low noise synthesizer VCO reference Optical Communication
More informationPin Configuration. Surface Mount 9.10 x 4.80 x 1.24 mm SMP-35C
Features For multiple applications Usable bandwidth 10 MHz Low loss High attenuation Balanced operation Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pbfree Pb Package Surface
More informationFeatures Excellent VSWR, 1.1:1 passband Small size Temperature stable LTCC construction
Ceramic Bandpass Filter 5Ω Maximum Ratings Operating Temperature Storage Temperature 15 to 16 MHz -55 o C to 1 o C -55 o C to 1 o C RF Power Input* 1.5W at 25 o C *Passband rating, derate linearly to.25w
More informationPin Configuration. Surface Mount 9.00 x 7.01 x 1.50 mm SMP-35B
Features For broadband applications Typical 3 bandwidth of 65 High attenuation Singleended operation Ceramic Surface Mount Package (SMP) Replaces Sawtek P/N 851948 (BW 3=64 ) Hermetic RoHS compliant (2002/95/EC),
More informationDetailed Electrical Specifications: Specifications subject to change without notice. Broadband Narrowband 25 C
fee Ultra Low Profile 85 Balun 75Ω to 75Ω Balanced Description The B225J7575AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on
More information