Technical Application Guide for UP-SHINE LED Downlight UP-DL W

Transcription

1 Technical Application Guide for UP-SHINE LED Downlight UP-DL W

2 Introduction It's an ultra thin integrated anti-glare grilling lens downlight. The height is less than 4mm with built-in driver, suitable for various applications. Grilling design effectively reduce the UGR index. Luminous efficiency 11lm/ w. Equipped with push button looping connection terminal (LL-NN-EE), the simple structure provides easy access to installation and high security. Up to 7% energy saving compared to standard CFL Long lifetime of 4, hours Triac dim 9 wide beam angle 16-17mm cutout CCT: 3K 4K 5K 57K No UV/IR light Environment friendly, without Mercury or any other hazardous substances Application notes IP54 at room side for indoor use only Professional electrician for installation only Switch off before installation Do not touch when in use Keep away from hot steam and corrosive gas Application Areas It is designed for general lighting applications in office, supermarket, shop, school, hotel, etc. It is also widely used for public areas, such as stairway, lobby, reception, corridors etc. Certificate SAA

3 Product Information Ø158 Technical Specifications Model Voltage Power Power Factor Lumen (±5%) Beam angle CCT Lifespan CRI Dimmable Dimension UP-DL W AC1-277V 18W o 3K 4h 8 No 19*19*43.5mm cutout 16-17mm UP-DL W AC1-277V 18W o 4K 4h 8 No 19*19*43.5mm cutout 16-17mm UP-DL W AC1-277V 18W o 5K 4h 8 No 19*19*43.5mm cutout 16-17mm UP-DL W AC1-277V 18W o 57K 4h 8 No 19*19*43.5mm cutout 16-17mm UP-DL W-D AC23V 18W o 3K 4h 8 Yes 19*19*43.5mm cutout 16-17mm UP-DL W-D AC23V 18W o 4K 4h 8 Yes 19*19*43.5mm cutout 16-17mm UP-DL W-D AC23V 18W o 5K 4h 8 Yes 19*19*43.5mm cutout 16-17mm UP-DL W-D AC23V 18W o 57K 4h 8 Yes 19*19*43.5mm cutout 16-17mm Driver data Sheet Driver data DIM Non dim Input rated Voltage AC23V AC1-277V Frequency 5Hz 5/6Hz Input Voltage AC2-24V AC9-35V Efficiency 83% 88% Total load Wattage 18W±1W 18W±1W Power Factor.9.9 Rated input current.1a.2a Full load output Voltage DC48-58V DC4-58V Rated output current 29mA 3mA Output current range 29mA±5% 3mA±5% Power tolerance ±5% ±5% Current output tolerance ±5% ±5% Dimming range 8%-1% Dimmer Triac dimmers Short circuit protection PASS PASS Over voltage protection PASS PASS Over temperature protection PASS PASS THD 2% 2% (@23V) Flick free No Yes Withstand voltage Fixture Compatibility Rated Wattage Electrical Classification Ingress Protection Operating Temp Operating Humidity Storage Temp 18W Ⅰ IP54-2 o C~45 o C ~9% -2 o C~65 o C

4 Spectral Distribution 3K 4K Max=6913 [1.=2] 2.29 SDCM F3K.8 Max=6252 [1.=2] SDCM F4K x=.4441 y= x=.3885 y= K 57K.8 Max=6856 [1.=2] 5.5 SDCM F5K.8 Max=8422 [1.=2] 5.53 SDCM F57K x=.359 y= x=.3347 y= Photometric Diagram 3K 4K / MH=1m C/18 C9/27 Flux out: 1182 lm / MH=1m C/18 C9/27 Flux out: 1279 lm AVERAGE BEAM ANGLE(5%): 84.4 DEG Height Eavg, Emax Angle: 67.81deg Diameter AVERAGE BEAM ANGLE(5%): 8 DEG Height Eavg, Emax Angle: 69.59deg Diameter 5K 57K / MH=1m C/18 C9/27 Flux out: 122 lm / MH=1m C/18 C9/27 Flux out: 1188 lm AVERAGE BEAM ANGLE(5%): 83. DEG Height Eavg, Emax Angle: 65.94deg Diameter AVERAGE BEAM ANGLE(5%): 84.6 DEG Height Eavg, Emax Angle: 67.47deg Diameter

5 Polar Diagram Comparison -15 O 18 O 15 O -12 O 12 O -9 O 9 O O 9 6 O 12-3 O 15 3 O O AVERAGE BEAM ANGLE (5%): 84.6DEG C/18, 83.8 deg C3/21, 85.9 deg C6/24, 85.4 deg C9/27, 83.4 deg Driver lifetime & LED light decay rate Driver Lifetime LED Light Decay Rate 9 11%.4 Lifetime (hours) o C 75 o C 85 o C 95 o C 15 o C Capacitor Tc ( o C) % Luminous Flux 15% 1% 95% 9% 85% % 75% FLUX.1.5 U'V' 7% LifeTime (hours) Temperature The testing is operated at 25 C The lifetime of capacitor, minimum of 5, hours if operated at 15 C, will be doubled whenever the temperature drops 1 C. The highest withstand temperature of IC, MOS could be 12 C The highest withstand temperature of LED junction temperature is 15 C Temperature ( o C) :13:13 11:25:1 11:37:1 11:49:1 12:1:1 12:13:1 12:25:1 12:37:1 12:49:1 13:1:1 13:13:1 13:25:1 13:37:1 13:49:1 14:1:1 14:13:1 14:25:1 14:37:1 14:49:1 15:1:1 15:13:1 15:25:1 15:37:1 15:49:1 16:1:1 16:13:1 16:25:1 16:37:1 Time IC Capacitor MOS PCB LED Fitting Environmental temperature The driver lifespan is based on capacitor working temperature.

6 Installation Procedure WARNING 1.Switch off before installation. 2.Switch on only after complete installation and examination of the circuit. 3.Professional electrician for installation and maintenance only. Turn Off power supply before starting any installation. Read instructions & check you have all the tools & accessories to complete the installation correctly. 1. Open a hole according to the cutout size of led downlight. 2. Open the driver cover. L = = N = Brown EARTH Blue 3. Feed the main AC wire L.N to the fast connection terminal block respectively. 4. Fix the cover back. 5. Hold back spring clips then push downlight into the hole. 6. Make sure the downlight fixed tightly in ceiling, turn on the power. Packaging Information SIZE(CM) N.W/pc (KGS) G.W.(KGS) Q'TY(PCS) Carton 45*41* '' standard container 4'' standard container CTNS Q'TY(PCS) VOLUME(CBM) Phone: Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China