FELICIA ED 2C RGB. Super high Flux output and high Luminance RGB LED Module

Transcription

1 FELICIA ED FELICIA ED 2C RGB Super high Flux output and high Luminance RGB LED Module

2 Page 2 of 16 Pages for reference: Pages for reference:... 2 Introduction... 3 Short form Characteristics... 4 Dimensions LED Module:... 5 Characteristics for Felicia 2C RGB... 6 Colour Spectrum... 8 Typical Dome Type Radiation pattern Part number structure Luminous Flux Precautions for use... 15

3 Page 3 of 16 Introduction Background This LED Module is for daisy chain application where it can be used with external driver. No end harness is necessary please look into wiring diagram guide. Description Optodrive Felicia RGB series is designed for high current operation and high flux output applications. Optodrive thermal management performance is excellent in its solution. It is incorporates state of the art SMD design and Thermal emission material. Full color Optodrive LED Module is the first full color package, using 3 RGB power chips and rendering 7colors. In case of the full color product used in architectural lighting or decoration, it emits 7colors in one package so that it can render a clear mixed color when it is mixed with other colors.

4 Page 4 of 16 Short form Characteristics Mechanical Board dimensions: Assembly holes: Wire Connector: Height PCB: LED: Connector: Total: 30.3 x 27 mm diameter 2 x x mm PHR-3 or similar 1.6 +/- 0,16 mm 1.0 mm 5.5 mm 7.1 mm Electrical Number of LED s: Connector Voltage Vf LED current Total LED Voltage Connector 1 ea 2 ea See separate page 400mA maximum pro chip 50 VDC over all LEDs in the chain PH Wiring diagram: TBD

5 Page 5 of 16 Dimensions LED Module: Dimensions PCB Dimensions LED

6 Page 6 of 16 Characteristics for Felicia 2C RGB 1. Electro-Optical characteristics at (Red, Green, and Blue All Color in use) 1-1 Electro-Optical characteristics at TA=25ºC Parameter Symbol Value Unit Min Typ Max Luminous Flux (78) [3] - lm Forward Voltage VF - R: V G: 3.5 B: 3.2 Forward Current IF R,G,B:350 ma View Angle 2 x 1/2 120 deg. 2. Blue 2-1 Electro-Optical characteristics at IF=350mA, TA=25ºC Parameter Symbol Value Unit Min Typ Max Luminous Flux lm Dominant Wavelength D nm Forward Voltage VF V View Angle 2Θ 1/2 120 deg. Thermal Resistance 14 C / W 3. Green 3-1 Electro-Optical characteristics at IF=350mA, TA=25ºC Symbol Value Unit Parameter Min Typ Max Luminous Flux lm Dominant Wavelength D nm Forward Voltage VF V View Angle 2Θ 1/2 120 deg. Thermal Resistance 16 C / W

7 Page 7 of Red 4-1 Electro-Optical characteristics at IF=350mA, TA=25ºC Parameter Symbol Value Unit Min Typ Max Luminous Flux lm Dominant Wavelength D nm Forward Voltage VF V View Angle 2Θ 1/2 120 deg. Thermal Resistance 16 C / W

8 Page 8 of 16 Colour Spectrum 1. Pure White (IF = R:220, G:350, B:100 ma for the reference condition) 1.0 Standard eye response curve Relative Spectral Power Distribution Wavelength (nm) 2. Blue, Green, Red (IF= 350mA) Relative Spectral Pow er D istribution Red Green Blue W avelength (nm )

9 Page 9 of Forward Voltage vs. Forward Current, TA=25 Average Forward Current [ma] Red Green Blue Forward Voltage [V]

10 Page 10 of Forward Current vs. Normalized Relative Luminous Flux, TA=25 C Relative Lumious Flux Red Green Blue Forward Current [ma] 3. Forward Current vs Wavelength shift TA=25 C Dominant w avelength Shift(nm) R ed G reen Blue Forw ard current(m A )

11 Page 11 of 16 Typical Dome Type Radiation pattern 1. Pure White Relative Intensity Directional angle (deg.) Red, Green, Blue Red Green Blue Relative Intensity Directional angle (deg.)

12 Page 12 of 16 Part number structure Full code of Optodrive Felicia 2C RGB version. X1 X2 X3 X4 X5 X6 X7 X8 X9 X10 X11 X12 X13 X14 X15 X16 Part Number: Felicia2C ODF X1 (Se more under chapter: Dimension PCB) Colour X(x2) X2 (Se more under chapter: See more about short form letters) Type of PCB 2C X3 (Se more under chapter: Dimension PCB) Type of LED P4 X4 (Se more under chapter: Characteristics for Optodrive) Type of connector PH X5 (Se more under chapter: Mechanical Characteristics) Code and Labeling: Luminous flux RED X6 Luminous flux BLUE X7 Luminous flux GREEN X8 Dominant Wavelength RED X9 Dominant Wavelength BLUE X10 Dominant Wavelength GREEN X11 Internal Code X14 X15 The RGB have its own structure for binning and labeling

13 Page 13 of 16 Luminous Flux RED Bin Code Luminous Flux (lm) P Q BLUE Bin Code Luminous Flux (lm) K L GREEN Bin Code Luminous Flux (lm) R S Tolerance : ±10% of Luminous flux value Dominant Wavelength RED Bin Code Dominant Wavelength (nm) R BLUE Bin Code Dominant Wavelength (nm) B GREEN Bin Code Dominant Wavelength (nm) F G H Tolerance Dominant wavelength: ±0.5 nm

14 Page 14 of 16 Forward Voltage Colour Forward Voltage (Vf) Red Blue Green Tolerance: ±0.06V No further forward voltage binning available Test condition is IF = 350 ma at room temperature (TA= 25 C).

15 Page 15 of 16 Precautions for use This device should not be used in any type of fluids such as water, oil, organic solvent etc. When cleaning is required, use only water together with mild soap on the outside of the lens. Cleaning inside of the LED module is strictly prohibited. The appearance and specifications of the product may be modified for improvement without notice. Long time exposure of sunlight or occasional UV exposure will cause lens discoloration. Opening of the LED module is prohibited due to risk of EMC, dust, grease and other exposures that will damage it. The LED Module should always be mounted to a proper heat sink before it s connected with its proper leads. This is due to electrical hazard. ROHS Compliant All our LED modules meet the Restrictions of Hazardous Substances (RoHS)! There has been a growing consensus that Lead Free Systems should increase for the safety of our environment. It is a very serious problem that lead and other harmful materials are being used in commercial and industrial products, causing more and more environmental problems. This has led to regulations such as RoHS (Restriction of the use of certain Hazardous Substances) from the EU and the Japan Ministry of Trade and Industry (MITI). All LED module makers providing products to these countries should comply with these restrictions. In order to meet the RoHS regulation, Optoga is strictly implementing a ban on lead and other hazardous materials in its products. This is in compliance with our responsibilities as good corporate citizens. Design for Environment: According to the EU-directive 2002/95/EC (RoHS) the following substances must not be used in this product Lead (Pb) alloys Mercury (Hg) Cadmium (Cd) Chromium (6+) compounds

16 Do you want to know more about benefits of OptoDrive LED? Read more about OptoDrive at You can contact us via Obviously, you can also call us on +46 (0) Optoga AB Optoga was founded in November 2004 in Arboga, Sweden and has many years of experience in electronics design. The company developes and supplies LEDs and LED-module solutions for the lighting industry, vehicle manufacturers and electronics companies. With the OptoDrive LED-module, Optoga has taken the initiative to replace strip lights, incandescent and halogen bulbs with LED-based sources. Köpingsvägen 4 SE Arboga SWEDEN Tel +46 (0) Fax +46 (0) info@optoga.com Copyright 2016 Optoga AB. All rights reserved.