Sensor technologies Distance measuring sensors Series SM6-AL. Brochure

Transcription

1 Sensor technologies Distance measuring sensors Series SM6-L Brochure

2 2 Sensor technologies Distance measuring sensors Series SM6-L with cable Plug, M8x1, 4-pin with distance measuring sensor, measurement range mm IO-Link 3 ccessories Sensor mounting for Series SM6-L 6 Sensor mounting, Series CB1 for Series ST6, SN2, SN6, SN1, SM6, SM6-L to mount on cylinder C12P, ITS 6 Sensor mounting, Series CB1 for Series SM6-L to mount on cylinder RTC 7

3 Sensor technologies Distance measuring sensors with cable Plug, M8x1, 4-pin with distance measuring sensor, measurement range mm IO-Link Certificates culus mbient temperature min./max. -20 C / +70 C Protection class IP65, IP67 Output signal 0-10 V DC, 4-20 m Quiescent current (without load) < 35 m Current signal 4-20 m Maximum load (analog current output) 500 Ω DC operating voltage min./max. 15 V DC - 30 V DC Residual ripple 10 % sampling interval 1,15 ms Resolution max. measuring range typ. 0,03 % FSR Repetitive precision max. measuring range typ. 0,06 % FSR Linearity deviation 0,5 mm Sampling speed 1,5 m/s Partial stroke Sampling speed 3 m/s Full stroke Display 2 LED Vibration resistance Hz, 1 mm Shock resistance 30 g / 11 ms Materials: Housing Cable sheath End caps luminum Polyurethane Polyamide Technical Remarks Holders for cylinder series PR are included in the scope of delivery. For cylinder series ITS, please order the appropriate holders separately. FSR: Full Scale Range, max. measurement range The IO-Link device description (IODD) for the SM6-L distance measuring sensor is available for download in the Media Centre.

4 4 Sensor technologies Distance measuring sensors with cable Plug, M8x1, 4-pin with distance measuring sensor, measurement range mm IO-Link Type of contact Cable length Measurement range Max. Overall length Sensor Incl. number of sensor clamp pairs Part No. [m] [mm] [mm] [piece] R R R R R R R R R R R R nalog R R R R R R R R R R R R R R interfaces: Plug; M8x1; 4-pin short circuit resistant / Protected against polarity reversal / Overload protection

5 Sensor technologies Distance measuring sensors with cable Plug, M8x1, 4-pin with distance measuring sensor, measurement range mm IO-Link 5 Dimensions 20 3* 2,6 6,7 4, * 1* Y 2 4 1,25 1,65 2,9 Y M8x * 1* * 3* 13 1* = threaded pin M3x11 2* = teach area 3* = LED = sensor length Pin assignment: 1 = (+), 2 = (OUT 1) 3 = (GND), 4 = (OUT 2/IO-Link), EN LED 1: yellow = measuring operation, red = error LED 2: green = voltage signal, blue = current signal 16407

6 6 Sensor technologies Distance measuring sensors ccessories Sensor mounting for Series SM6-L M4 SW2 8,3 7,5 0,7 13,6 2, Part No. For series Material Weight [kg] Delivery quantity [Piece] R SM6-L luminum Incl. mounting screw (brass) Sensor mounting, Series CB1 for Series ST6, SN2, SN6, SN1, SM6, SM6-L to mount on cylinder C12P, ITS B 3) E C 2) D 4) 2) ) 2,5 M ) Clamping threaded pin 2) Mounting screws for sensor 3) Tie rod 4) Cylinder profile

7 Sensor technologies Distance measuring sensors ccessories 7 Part No. Cylinders Ø [mm] R ST6, SN2, SN6, SN1, SM6, SM6-L R ST6, SN2, SN6, SN1, SM6, SM6-L Part No. Weight [kg] R R Scope of delivery: Incl. mounting screws For series B C D E M1 [Nm] Material luminum luminum Sensor mounting, Series CB1 for Series SM6-L to mount on cylinder RTC ) 3) B 2) B G F E H * 4) SW C C D D * Threaded pin (brass) 2 clamp mounting sets for SM6-L mm 3 clamp mounting sets for SM6-L mm 4 clamp mounting sets for SM6-L mm

8 8 Sensor technologies Distance measuring sensors ccessories Part No. For series Kolben Ø R SM6-L ) 2) 3) 4) 10,3 10,3 14,2 14,2 B C D E F G H SW ,8 9,8 9,2 9,2 18,5 18,5 22,6 22, , ,6 34,7 40,4 45,2 50,5 10,7 16,4 21,1 26,5 14,4 14,4 14,4 14, Part No. Material Weight [kg] Delivery quantity [Piece] R luminum

9 VENTICS GmbH Ulmer Straße Laatzen, GERMNY Phone Fax info@aventics.com Find more contact information at Only use the VENTICS products shown in industrial applications. Read the product documentation completely and carefully before using the product. Observe the applicable regulations and laws of the respective country. When integrating the product into applications, note the system manufacturer s specifications for safe use of the product. The data specified only serve to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that the products are subject to a natural process of wear and aging n example configuration is depicted on the title page. The delivered product may thus vary from that in the illustration. Subject to change. VENTICS S.à r.l. This document, as well as the data, specifications and other information set forth in it, are the exclusive property of VENTICS S.à r.l.. It may not be reproduced or given to third parties without its consent. PDF online