Cable transducer Analog output / redundant Measuring length absolute up to 5 m
|
|
|
- Leslie Warner
- 5 years ago
- Views:
Transcription
1 Features Magnetic sensing method Resolution: 12 bit Interface analog V / 0.. V /...20 ma Measuring length up to m Removable stickers for water outlet Teach inputs Extremely light thanks to housing of plastic and aluminum Available with redundant absolute signals BMMS K0 analog with flange connector M12 Technical data - electrical ratings Voltage supply Reverse polarity protection Yes Short-circuit proof Consumption typ. Initializing time Response time...0 VDC Yes ma (2 VDC, w/o load) 00 ms after power on <1 ms Interface Analog V / 0... V /...20 ma / Resolution: 12 bit Function Linear position feedback Linearity ±0.6 % full scale output (f.s.o.) Absolute accuracy ±1.1 % f.s.o. (+2 C) ±1.1 % f.s.o. ( C) Sensing method Magnetic Repeatability typ. mm Interference immunity DIN EN Emitted interference DIN EN Programmable Measuring range teachable parameters Diagnostic functions Self-diagnosis Reading back voltage output Factory setting Entire measuring range Min. output at 0 m Max. output at m Technical data - mechanical design Protection DIN EN 6029 IP 6 (encoder) Materials Encoder housing: aluminium Cable-pull housing: PA6 GF0 Cable: Stainless steel cable coated with polyamide Operating temperature C Service life Typ. >00000 strokes Measuring length m Cable acceleration 0 m/s² Cable diameter 0.61 mm Pull-in force > N Pull-out force 9 N Relative humidity 9 % temporary condensing Resistance DIN EN Vibration 10 g, Hz DIN EN Shock 0 g, 11 ms Weight approx. 00 g Connection Flange connector M12, -pin Flange connector M12, -pin Cable 2 m Bending radius Cable: > mm Special characteristics Coated electronic Instruction Please consider the assembly instructions 1
2 Part number BMMS K0N2 12/ R R Measuring wire fixation Mount with retaining ring Connection Cable 2 m, radial M 2 x flange connector M12, pin, radial (redundant version) N Flange connector M12, -pin, radial (not redundant version) Q Flange connector M12, -pin, radial Resolution 12/16 12/16 bit single-/multiturn Analog signals 0... VDC U VDC V...20 ma VDC redundant Y VDC redundant Z...20 ma redundant Accessories Connectors and cables Female connector M12, -pin, straight, without cable Female connector M12, -pin, straight, shielded, m cable Cable with male/female M12, -pin, angled, A-coded, m Cable with male/female M12, -pin, straight, A-coded, m Female connector M12, -pin, straight, without cable 2
3 Terminal significance +Vs supply voltage. (Redundant configuration provides decoupled dual voltage supply (+Vs1/+Vs2) separated by diodes. 0 V ground connection relating to +Vs. Iout Current output. Load: <00 Ω Uout Voltage output. Current output: max. 10 ma Load resistor: >1 kω between Uout / 0 V Set Teach input. Resting state: Low Level High: >0.7 x +Vs Level Low: <0. x +Vs Pull-Down resistor: 10 kω DV/Status Diagnostic output/teach output. R L - Vs: High: >(+Vs -1.0 V) Low: <.0 V R L - GND: High: >(+Vs -.0 V) Low: <1.0 V I Lmax = 10 ma Upon any short-time disturbance, DV will go on Low for 1 second. Teach process Activate teach process After power on set Set-input on HIGH for > seconds and afterwards on LOW level. DV/Status output: Oscillates after seconds. Position 1 Get cable transducer on position 1 intended for voltage output 1 / current output 1. Set Set-input for 1 second on HIGH level. DV/Status output: Switches to HIGH level for seconds and flashes shortly. Position 2 Get cable transducer on position 2 intended for voltage output 2/current output 2. Set Set-input for 1 second on HIGH level. DV/Status output: Switches to LOW level for seconds and oscillates afterwards. If measuring range is exceeded or the limits are too close to each other, the teaching process was not successful and has to be repeated. Set / restore default Set Set-input for 16 seconds to HIGH. DV/Status output: Oscillates after seconds. Note: The cable transducer hast to be completely drawn in. Behavior U Pos 2 Pos 2 Pos 1 Pos 1 Teach in direction - move in Teach in direction - move out m
4 Terminal assignment Cable for connection reference - Core color Analog signals U/ V white 0 V 0 V brown +Vs +Vs green d.u. Iout yellow Uout d.u. grey Set Set pink DV/Status DV/Status Screen: connected to housing Cable data: 6 x 0.1 mm 2 Cable redundant for connection reference - Core color Analog signals Y/7 Z white 0 V 0 V brown +Vs 1 +Vs 1 green Uout 1 Iout 1 yellow Uout 2 Iout 2 grey Set 1 Set 1 pink DV/Status 1 DV/Status 1 blue Set 2 Set 2 red DV/Status 2 DV/Status 2 black 0 V 0 V violet +Vs 2 +Vs 2 Screen: connected to housing Cable data: 10 x 0.1 mm 2 Flange connector M12, -pin for connection reference -N Pin Analog signals U/ V 2 +Vs +Vs d.u. Iout Uout d.u. Set Set Flange connector M12, redundant, 2 x -pin for connection reference -M Pin Connector 1 Connector 2 2 +Vs 1 +Vs 2 Uout 1 (Y/7) Uout 2 (Y/7) Iout 1 (Z) Iout 2 (Z) DV/Status 1 DV/Status 2 Set 1 Set Flange connector M12, -pin for connection reference -Q Pin Analog signals U/ V 2 +Vs +Vs d.u. Iout Uout d.u. Set Set 6 DV/Status DV/Status 7 n.c. n.c. n.c. n.c Flange connector M12, redundant, -pin for connection reference -Q Pin Analog signals Y/7 Z 2 +Vs +Vs Uout 1 Iout 1 Uout 2 Iout 2 Set 1 Set 1 6 DV/Status 1 DV/Status 1 7 Set 2 Set 2 DV/Status 2 DV/Status
5 Dimensions BMMS K0 cable radial ø1 ø.2 on either side xø ca. 7 ø BMMS K0 flange connector M12 ø1 ø.2 on either side xø ca. 7 ø
6 Dimensions BMMS K0 flange connector 2 x M12 ø1 ø.2 on either side xø ca. 7 ø
Absolute encoders - analog Blind hollow shaft ø12 mm Magnetic single- or multiturn encoders 12 bit ST / 16 bit MT
Blind hollow shaft ø mm Magnetic single- or multiturn encoders bit ST / bit MT BMSH 8, BMMH 8 analog - MAGRES Features Encoder single- or multiturn / analog Magnetic sensing Resolution: singleturn bit,
Technical data. General specifications. Measurement range min max. 360
Model Number Features Very small housing High climatic resistance 12 Bit singleturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling
Absolute encoders - SSI
with through hollow shaft Features Encoder multiturn / SSI Optical sensing method Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics
Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders 18 bit ST / 12 bit MT
Features High resolution encoder multiturn / SSI Optical sensing method Resolution: singleturn 18 bit, multiturn 12 bit Electronic setting of zero point Counting direction input Available with additional
Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT
Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available
Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT
Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available
Incremental encoders Blind or through hollow shaft ø12 mm pulses per revolution
Blind or through hollow shaft ø mm...5 pulses per revolution Features Encoder with blind or through hollow shaft ø mm Optical sensing method Max. 5 pulses per revolution Small profile depth Versatile mounting
Absolute encoders - SSI Shaft with clamping or synchro flange Optical multiturn encoders 14 bit ST / 12 bit MT
Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Suitable for high positive,
Incremental encoders With blind or through hollow shaft pulses per revolution programmable
Features Size ø58 mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536,
Incremental encoders With blind or through hollow shaft pulses per revolution programmable
Features Size mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536, programmable
Acceleration sensors With relay output for limit monitoring Analog / CANopen
Features Acceleration sensor / analog / CANopen Up to two relay outputs for limit monitoring 3 axes detection, MEMS based Measuring range ±2 g Connection: connector M12, 12-pin Offshore capability (plastic
NOVOHALL Rotary Sensor non-contacting. Series RSC2800 analog
NOVOHALL Rotary Sensor non-contacting Series RSC2800 analog The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional Hall sensors,
Incremental Encoder for special applications
Model Number Features Up to 50,000 ppr Extended temperature range Industrial standard housing Ø58 mm Servo or clamping flange 10 V... 30 V with short-circuit proof push-pull output Description High performance
Incremental hollow shaft encoder BRIH EcoMag
Incremental hollow shaft encoder BRIH EcoMag features miniaturized hollow shaft encoder with wide pulse range radial cable connection or connector end shaft mounting up to mm general data voltage supply
Magnetic absolute multi-turn hollow shaft encoder BMMH MAGRES SSI
Magnetic absolute multi-turn hollow shaft encoder BMMH MAGRES SSI features robust multi-turn encoder up to - 2 bit single-turn resolution - 3 bit multi-turn resolution miniature housing zero point programmable
Technical data. General specifications V DC No-load supply current I 0. typ. 50 ma Power consumption P 0
Model Number SYNCHRON SERIELLES INTERFACE Cable pull rotary encoder with SSI interface Features Solid yet lightweight plastic construction Compact, slim design (the shaft of the mounted rotary encoder
Positioning drives DC motor, brushless Absolute multiturn position detection, Profibus-DP
Features Positioning drive with worm gear bevel geared shaft Profibus-DP Brushless DC motor Absolute multiturn position detection Nominal power output 80 W inputs programmable Separate communication and
Technical data. General specifications. Linearity error ± 0.1 Electrical specifications Operating voltage U B
Model Number SYNCHRON SERIELLES INTERFACE Features Very small housing Up to 32 Bit multiturn SSI interface Free of wear magnetic sampling High resolution and accuracy Description The ENA36IL series are
Incremental Encoder Model: FOI58
Incremental Encoder Model: FI58 Document no. FI 188 BE Date: 1.01.201 Robust mechanical construction, high vibration and shock resistance 1 to 16,8 pulses/ revolution perating temperature - 0 C to + 85
Magnetic absolute single-turn encoder BMSH MAGRES parallel
Magnetic absolute single-turn encoder BMSH MAGRES parallel features robust single-turn encoder up to 9 bit parallel interface miniature housing zero-point programmable general data voltage supply 5 VDC
Technical data. General specifications V DC Power consumption P 0. 1 W Time delay before availability t v
Model Number SYNCHRON SERIELLES INTERFACE Features Very small housing Up to 32 Bit multiturn SSI interface Free of wear magnetic sampling High resolution and accuracy Description The ENA36IL series are
Absolute encoders - SSI EX approval ATEX EEx d IIC T6 Optical single and multiturn encoders 14 bit ST / 12 bit MT
Features Encoder single- or multiturn / SSI / ATEX Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Clamping flange with shaft ø10 mm Explosion protection per EEx d IIC T6 Area of application:
ABSOLUTE MAGNETIC ROTARY ENCODER ANALOG
High-resolution absolute encoder based on magnetic technology. Singleturn sensing based on 360 Hall effect technology. Multiturn sensing based on magnetic pulse counter. No batteries used. Main Features
IXARC Incremental Encoder UCD-IPT M100-PRD. Interface Programmable Incremental. Configuration Tool UBIFAST Configuration Tool (Version 1.6.
IXARC Incremental Encoder UCD-IPT00-08192-M100-PRD Interface Interface Programmable Incremental Programming Functions PPR (1-16384), Output, Counting Direction Configuration Tool UBIFAST Configuration
Technical data. Functional safety related parameters MTTF d Mission Time (T M ) max. 140 ma Power consumption P 0. Voltage drop
Release date: 2014-04-14 15: Date of issue: 2016-05-0 t102_eng.xml Model Number Features Industrial standard housing Ø58 mm 1 Bit singleturn Output code: gray and binary Short-circuit proof push-pull output
POSIROT. PMIS4, PMIR5 Magnetic incremental encoder. Magnetic wheels for rotative applications PMIS4, PMIR5
Variant e: PMIS4, PMIR 5 POSIROT Magnetic incremental encoder Magnetic wheels for rotative applications All metal housing Protection class IP67 Excellent protection of the active measurement area Highest
NOVOTURN Multiturn Sensor non-contacting. Series RSM-2800
NOVOTURN Multiturn Sensor non-contacting Series RSM-2800 Special features Non-contacting, magnetic Long life Electrical range 720 up to 5760 in 360 -steps available (2 to 16 turns) True-Power-On System:
Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 700 a at 40 C Mission Time (T M ) L 10
Model Number SYNCHRON SERIELLES INTERFACE Features Recessed hollow shaft SSI interface Up to Bit multiturn Free of wear magnetic sampling High resolution and accuracy Additionally push buttons for preset
Multiturn absolute encoder
SYNCHRON SERIELLES INTERFACE Multiturn absolute encoder Release date: 2016-07-12 16:14 Date of issue: 2016-07-12 t4917_eng.xml Model Number Features Industrial standard housing Ø58 mm 0 Bit multiturn Data
Multiturn absolute encoder
SYNCHRON SERIELLES INTERFACE Multiturn absolute encoder Model Number Features Industrial standard housing Ø58 mm 30 Bit multiturn Data transfer up to 2 MBaud Optically isolated RS 422 interface Recessed
NOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional
Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 700 a at 40 C Mission Time (T M ) L 10
Model Number SYNCHRON SERIELLES INTERFACE Features Solid shaft SSI interface Up to Bit multiturn Free of wear magnetic sampling High resolution and accuracy Additionally push buttons for preset function
NOVOHALL Rotary Sensor non-contacting. Series RSC-2800
NOVOHALL Rotary Sensor non-contacting Series RSC-2800 Special features Non-contacting, magnetic technology Measuring range up to 360 Available with push-on coupling or marked shaft Simple mounting Protection
Absolute multi-turn hollow shaft encoder BOMH Dignalizer SSI
features high resolution multi-turn encoder up to - 8 bit single-turn - 8 bit multi-turn interface programmable permanent self-test reference point programmable general data voltage supply 5 VDC (05C)
Protection class IP67/IP69K Magnetic measurement principle
POSITILT PTAS2 Magnetic inclination sensor with analog output Magnetic inclination sensor in a 36 mm housing Protection class IP67/IP69K Magnetic measurement principle Outputs: Voltage 0.5... 4.5 V; 0.5...
Encoder - Absolut 2RMHF-SSI
Absolute Encoder: Ø24 mm Hollow Shaft: Ø3 mm to ¼ Inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction IP-Rating: IP64 or IP67 Mechanical
ABSOLUTE MAGNETIC ROTARY ENCODER ANALOG
High-resolution absolute encoder via magnetic technology. Singleturn encoding based on 360 Hall effect technology. Multiturn encoding based on magnetic pulse counter. No batteries used. Main Features -
FVS58 singleturn absolute encoder. FVS58. Technical Product description data Incremental encoders special designs. Technical data
absolute encoder Industrial standard housing Ø58 mm 1 Bit singleturn Output code: Gray and binary Short-circuit proof push-pull output Inputs for selection of counting direction, LATCH and PRESET Code
Protection class IP67/IP69K Magnetic measurement principle
POSITILT PTAS2 Magnetic inclination sensor with analog output Magnetic inclination sensor in a 36 mm housing Protection class IP67/IP69K Magnetic measurement principle Outputs: Voltage 0.5... 4.5 V; 0.5...
DG 60 L Incremental Encoder
Incremental Encoder Features Incremental encoder with 60 mm outer diameter ugged die-cast aluminum housing Quadrature output with reference marker, complementary output signals Protection to IP 67 Square
ABSOLUTE ROTARY ENCODER MULTI-TURN BIT PARALLEL
Main Features - Compact and heavy-duty industrial model - Interface: Bit-parallel, push pull ΠShort circuit proof - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096
Standard Industrial Types RI 58-O / RI 58-T
Synchro flange Universal industry standard encoder Up to 40 000 steps with 10 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable
Incremental Shaft Encoders Industrial types
Synchro flange Universal industry standard encoder Up to 40 000 steps with 10 000 pulses High signal accuracy Protection class up to IP67 Operating temperature up to 100 C (RI 58-T) Flexible due to many
Incremental encoders Blind hollow shaft or cone shaft pulses per revolution
Features TTL output driver for cable length up to 550 m Very high resistance to shock and vibrations Hybrid bearing for extended service life Shaft insulation up to.8 kv Large terminal box, turn by 80
VR20 - Inductive sensor (LVDT) Measurement range from 25 to 600 mm
VR20 - Inductive sensor (LVDT) Measurement range from 25 to 600 mm Technical data: Measurement range [mm] 0 25 0 50 00 80 0 100 0 150 0 200 0 300 0 600 Linearity 0,30% (0,20% Optional), 1,50% for a range
Absolute Encoders Multiturn
The Sendix F36 multiturn with the patented Intelligent Scan Technology is an optical multiturn encoder in miniature format, without gears and with 00% insensitivity to magnetic fields. With a size of just
Standard Industrial types RI 58-O / RI 58-T
Universal industry standard encoder Up to 40 000 steps with 0 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable for high shock
Absolute Encoders - Singleturn
The Sendix 5853 and Sendix 5873 singleturn encoders with SSI or BiSS interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional
Standard Industrial types RI 36-H
Miniature industry encoder for high number of pulses Short mounting length Easy mounting procedure Applications: motors, machine tools, robots, automated SMD equipment NUMBER OF PULSES 5 / 0 / 0 / 5 /
WS12EX Position Sensor with Analog output Dust explosion-proof
Sensor for Hostile Environments Class IP67 Measurement Range: 0... 100 mm to 0... 3000 mm With Analog Output Dust Ex proof, category 3, zone 22 II 3D EEx T80 C IP67 Specifications Outputs Material Resolution
Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:
Shaft Encoder - Ø 50 mm Shaft: Ø 6 mm to Ø 12 mm Resolution up to 12.500 ppr IP 65 (IP 67 option) Formerly named 2R or 2R-3L Automation / Electrical Specifications Code: Resolution: Supply Voltage: Voltage:
NOVOHALL Rotary Sensor touchless transmissive. Series RFX-6900
NOVOHALL Rotary Sensor touchless transmissive Series RFX-6900 Special features Very robust design to extreme environmental conditions Touchless hall technology Electrical range up to 360, in single and
Temposonics. Magnetostrictive Linear Position Sensors. EP / EL Analog Data Sheet
Temposonics Magnetostrictive Linear Position Sensors EP / EL Analog For standard applications Position measurement with more than one magnet Ideal for limited installation space MEASURING TECHNOLOGY The
DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach
NEW DRS: Incremental encoders, number of lines and zero pulse width freely programmable DRS: s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing
Incremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution
Features Robust, compact housing Two bearings with large distance, one at each end High shaft load up to 450 N Shock resistant up to 250 g Shaft insulation up to 2.8 kv Highest operating speed 10000 rpm
POSIWIRE. WS85 with internal magnetic encoder Position Sensor. Cable Extension Position Sensors. Datasheet
Cable Extension Position Sensors with internal magnetic encoder Position Sensor Datasheet Copyright ASM GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this data sheet does
Safety Angle Transducer Type Series Potentiometric, active
Special features Potentiometric measuring principle with conductive plastic resistance track and integrated signal amplifier Redundant design for safety relevant applications available Extremely rugged
Incremental Shaft Encoders Industrial types
Synchro flange! Universal industry standard encoder! Up to 40,000 steps with 10,000 pulses! High signal accuracy! Protection class up to IP 67! Operating temperature up to 100 C (RI 58-T)! Flexible due
MHM5 SERIES ETHERNET/IP ABSOLUTE MULTI -TURN ENCODER
MHM5 SERIES ETHERNET/IP ABSOLUTE MULTI -TURN ENCODER Features Robust and compact design Solid shaft version Ø 10mm standard, with Ø 6mm optional Precision ball bearings with sealing flange High temperature
POSIWIRE. WS10SG Position Sensor. Cable Extension Position Sensors. Datasheet
Cable Extension Position Sensors Position Sensor Datasheet Copyright ASM GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this data sheet does not form part of any quotation
MHAD 50 - HDmag. Features
Magnetic sensing, hollow shaft 30 mm MHAD 50 with cable Features Absolute encoder with magnetic sensing and without bearings Absolute resolution max. 16 bit singleturn Additional incremental signals Robust
Online data sheet. ACM60B-S1KE13x06 ACM60 ABSOLUTE ENCODERS
Online data sheet ACM60B-S1KE1x06 ACM60 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Performance Number of steps per revolution Number of revolutions Ordering information
Draw wire sensors, draw wire sensors for displacement, position
Draw wire sensors, draw wire sensors for displacement, position Sensors based on potentiometer and encoder, for industrial and OEM applications for measurement of lengths, stroke, displacement, position,
POSIWIRE. WS12 Position Sensor. Cable Extension Position Sensors. Datasheet
Cable Extension Position Sensors Position Sensor Datasheet Copyright ASM GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this data sheet does not form part of any quotation
Absolute Encoders Multiturn
Absolute Encoders Multiturn Functional Safety, optical The absolute multiturn encoders Sendix 5863 SIL and 5883 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN
LVDT. Inductive Position Transducer. SL Series. Key-Features:
HM-1803 LVDT Inductive Position Transducer SL Series Key-Features: Content: - Measurement ranges 10...600 mm - External, or cable electronics with cable break detection - Linearity up to ±0.10 % of full
LVDT. Inductive Position Transducer. SL Series. Key-Features:
LVDT Inductive Position Transducer SL Series Key-Features: Content: - Measurement ranges 10...600 mm - External, or cable electronics with cable break detection - Linearity up to ±0.10 % of full scale
ABSOLUTE ROTARY ENCODER DEVICE NET
Main Features - Compact and heavy-duty industrial model - Certified: By ODVA - Interface: Device Net - Housing: 58 mm - Full or hollow shaft: 6 or 0 mm / 5 mm - Max. 6556 steps per revolution (6 Bit) -
high grade, temperature resistant plastic, Thermoplast with brass inserts
NOVOHALL Rotary Sensor touchless technology transmissive Series RFD-4000 Special features fully touchless - no shaft or seals to wear measure directly through any non-ferromagnetic material electrical
POSICHRON position sensor in stick design. Protection class. Voltage: V, 3 wire Current: ma, 3 wire
POSICHRON Position Sensor Stick Design with Analog Specifications POSICHRON position sensor in stick design Protection class IP67 Measurement range 0... 100 up to 0... 5750 mm Absolute position measurement
Operating Instructions
Operating Instructions Torque Transducer Type CD9515 Series Please read instruction carefully. Important Advice: The torque transducers of type CD9515 are suitable for applications in laboratories (for
Electrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85
![Electrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85](/thumbs/80/82459193.jpg "Electrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85")
Parallel Singleturn bsolute Value Encoder Features 13-bit Singleturn High code change frequency Inputs for: - Selection of counting direction - Buffer memory (LTCH) - Multiplex operation (TRISTTE) Short-circuit
TECHNICAL DATASHEET Incremental Encoder RI 30
Miniature encoder for industrial use Low current consumption High noise interference immunity Cable lengths of up to 00 m Suitable for high pulse frequencies High protection class Applications: CNC machines,
Rotary Measurement Technology Absolute Encoders, Multiturn
Mechanical drive Safety-LockTM High rotational speed -40 to 90 C IP Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
Absolute Encoders Singleturn
The absolute singleturn encoders Sendix 5853 SIL and 5873 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN EN ISO 6800-5- or PLe to DIN EN ISO 3849. The extra
Temposonics. Magnetostrictive Linear Position Sensors. GB-M / GB-T SSI Data Sheet
Temposonics Magnetostrictive Linear Position Sensors GB-M / GB-T SSI Sensor element and electronics can be changed Flat & compact sensor electronics housing Electrical connection is freely rotatable MEASURING
Magnetic absolute encoder GEL 2035 Serial interface (SSI), 24 Bit
Magnetic absolute encoder GEL 2035 Serial interface (SSI), 24 Bit Technical information Version 03.09 Resolution: Precision: 0.8 Signal pattern: Singleturn (ST): Multiturn (MT): up to 24 Bit SSI and SSI
ENCODER. Analog Multiturn Encoder. Serie 8.M5861. Key-Features:
ENCODER Multiturn Encoder Serie 8.M5861 Key-Features: Content: Order Code...2 Technical Data...3 Outputs & Connection... Dimensions...5 - Shaft with max. 10 mm diameter - 0...10 V,...20 ma, 0...5 V analog
Draw wire sensors, draw wire sensors for displacement, position
Draw wire sensors, draw wire sensors for displacement, position Sensors based on potentiometer and encoder, for industrial and OEM applications for measurement of lengths, stroke, displacement, position,
Inductive Linear Position Sensor LI800P0-Q25LM0-LIU5X3-H1151
Rectangular, aluminium / plastic Versatile mounting possibilities LED indicates measuring range Immune to electromagnetic interference Extremely short blind zones Resolution, 12-bit 4-wire, 15 30 VDC Analog
high grade, temperature resistant plastic, Thermoplast with brass inserts
NOVOHALL Rotary Sensor touchless technology transmissive Series RFD4000 analog Special features fully touchless - no shaft or seals to wear measure directly through any non-ferromagnetic material electrical
More Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 38 Industrial draw-wire sensors wiresensor P5 analog - Robust aluminum profile housing - Customized versions for OEM - Potentiometer, current
POSICHRON position sensor in a stainless steel pressure case. Voltage: V, 3 wire Current: ma, 3 wire
Rod Profile with Analog Specifications POSICHRON position sensor in a stainless steel pressure case Protection class IP68 Compression-proof up to 15 bar Measurement range 0... 100 to 0... 5750 mm Absolute
LENORD. +BAUER... automates motion. GEL 2351 with current or voltage interface. Technical information Version General. Features.
GEL 2351 with current or voltage interface LENORD +BAUER... automates motion. Technical information Version 201-11 General Single turn absolute rotary encoder with a resolution of 16 bits Magneto-resistive
Temposonics. R-Series SSI. Absolute, Non-Contact Position Sensors. Temposonics RP and RH Stroke length mm. Perfect data processing 0.
R-Series Temposonics Absolute, Non-Contact Position Sensors R-Series Temposonics RP and RH 25 7600 mm Perfect data processing 0.5 μm Rugged industrial sensor Linear and absolute measurement LEDs for sensor
Temposonics. Magnetostrictive Linear Position Sensors. EH Analog Data Sheet
Temposonics Magnetostrictive Linear Position Sensors EH Analog High pressure resistant sensor rod Position measurement with more than one magnet Small & compact Ideal for standard hydraulic cylinders MEASURING
Absolute Encoders - Singleturn
The Sendix 5 and Sendix 7 singleturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional SinCos
Online data sheet DFS60B-S4PA00S74 DFS60 INCREMENTAL ENCODERS
Online data sheet DFS60B-S4PA00S74 DFS60 A B C D E F Illustration may differ Ordering information Type Part no. DFS60B-S4PA00S74 1081183 Other models and accessories www.sick.com/dfs60 H I J K L M N O
Online data sheet AFS60E-S1AA AFS/AFM60 SSI ABSOLUTE ENCODERS
Online data sheet FS0E-S0009 FS/FM0 SSI SOLUTE ENCODERS FS0E-S0009 FS/FM0 SSI SOLUTE ENCODERS C D E F Ordering information Type Part no. FS0E-S0009 0 Other models and accessories www.sick.com/fs_fm0_ssi
Temposonics. Magnetostrictive Linear Position Sensors. ER Analog Data Sheet
Temposonics Magnetostrictive Linear Position Sensors ER Analog Compact sensor model Operating temperature up to +75 C (+167 F) Ideal for flexible mounting MEASURING TECHNOLOGY The absolute, linear position
ABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS422/485) - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096 revolutions
Material: Weight: Shaft Loads:
Absolute Encoder Type SCA36NA-SSI Absolute Encoder - Ø 36 mm Shaft - Ø 6 mm Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction Enclosure Rating
Smart Power Relay E I...
Smart Power Relay E-48-8I... Description The Smart Power Relay E-48-8I.- is a remotely controllable electronic load disconnecting relay with three functions in a single unit: l electronic relay l electronic
Express Delivery. Axial. Connection
HIGH RESOLUTION INCREMENTAL SOLID SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Shaft from Ø 6 to 12 mm Protection class IP67 according to DIN
ENCODER. Analog Multiturn Encoder. Serie 8.M3661/M3681. Key-Features:
ENCODER Multiturn Encoder Serie 8.M366/M368 Key-Features: Content: Order Code...2 Technical Data...3 Outputs & Connections...5 Dimensions...6 - Shaft with max. 0 mm diameter - 0...5/0V, 4...20 ma analog
ABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS 422) - Housing: 58 mm - Shaft: 6 or 10 mm - Hollow shaft 12 mm - Blind hollow shaft 15 mm - Max. 65,56 steps
LVDT. Inductive Position Transducer - Hydraulic Series. SM-HYD-F18 Hydraulic-Series. Key-Features:
LVDT Inductive Position Transducer - Hydraulic Series SM-HYD-F18 Hydraulic-Series Key-Features: Content: - M18x1,5 mm integral thread - Operating pressure 150 bar - Ranges 2...200 mm - Linearity up to
Temposonics. Magnetostrictive Linear Position Sensors. EP / EL Analog Data Sheet
Temposonics Magnetostrictive Linear Position Sensors EP / EL Analog For standard applications Position measurement with more than one magnet Ideal for limited installation space MEASURING TECHNOLOGY The
PMIS2 POSIMAG Magnetoresistive Position Sensor with Incremental Output
PMIS2 POSIMAG with Incremental Compact Sensor for Industrial Applications Sensor PMIS2 Non contact Robust Fast Protection class IP67 Incremental encoder output Reference pulse Specifications Incremental