Reinforced with bar tacks at fly. Slit at hemline

Transcription

1 Technical flat Size: 2S - M - 6L Page: 1 of 11 Elastic with logo at sides Darts at back Reinforced with bar tacks at fly Pocket left side with pleat at back Slit at hemline Front with zipper at fly Description: Female 3/4 trouser with elastic logo band at waist line both sides. Button, button-hole and zipper at fly. Darts at back. Side pocket with pleat on right side. Slit at hemline with possible turn up. Decorative double stitching at backseam + round pocket. Reinforced with bar tacks at fly, hemline and pocket. Further details in style description.

2 Style description Size: 2S - M - 6L Page: 2 of 11 Material and trim table Description Article no Fabric col. white Composition Applied Consumption 45/55% PES/COT 225 gr/m2 Main fabric all pattern parts Main fabric all pattern parts Fabric col. navy Thread 100 col. matching t/t 100% Polyester All decorative stitches + needle threads + bar tack Thread 120 col. matching t/t 100% Polyester All top + bottom looper threads Button 4-hole 27 Nylon 6.6 Waistband cf 1 pcs Metal sz 3 for indusrtial wash At fly front 1 pcs length acc to measurment At sides of waist band length acc. to measurement Zipper Elastic Special LOGO design 35 mm Carelabel According to general requirements Print According to general (size/identity) requirements 100% Polyester Left side 15 cm from top 1 pcs pigment print Inside waistband centre back 1 pcs Machine type requirements Machine type Stitch type Applied Steam Pressing - Intermediate pressing of all seams, finish press Three thread overlock st/2 cm All seams must be straight Safety lock st/2 cm All seams must be straight Lock stitch st/2 cm 7 st/2cm st/2 cm needle stitch Straight button hole - Assembling Decorative stitches Decorative stitches Waistband cf Bar tack st/1 cm Reinforcement according to style specifications Machine for push-buttons - Attaching push-buttons Pressure Z - Needle system: = Canu: 20:05 1 NM: 80 Size: 12 (134 (R), 135x5, SY 1955, DPx5) = Canu: 03:36 1 NM: 80 Size: 12 (B27, MY1023, UY 191 GS, DCx27)

3 Style description Size: 2S - M - 6L Page: 3 of 11 Material and trim table Patterns according to pattern overview Sizerange S - M - 6L length 53 cm General Seam allowance/tolerance Assembling: Hemline bottom: 1 cm/ +/- 1 mm Folded according to notches. Stitched 4.8 cm from bottom +/- 1 mm Waist band: Button hole: Fly: Single stitch 2 mm from edge/ +/- 0.5 mm according to style description: Details Straight button hole according to template. Size of button hole according to button. According to enclosed template +/- 1 mm Side pocket: Folded 1 x 4 cm according to notch. Stitched 3,5 cm from top edge +/- 1 mm + Double stitch 2+7 mm from edge/ +/- 0.5 mm Single stitch 2 mm from edge/ +/- 0.5 mm Double stitch 2+7 mm from edge/ +/- 0.5 mm Must be placed according to style description 1 cm wide/ +/- 1 mm +/- 1 mm Decorative stitches: Bartacks: Seam assembling: Markings and pattern parts Grainline: Each pattern part must be placed on the fabric according to the visual grainline showing orientation and direction on the pattern part. Tolerance +/- 1 mm Drill: For placement of side pocket 0.5 x 0.5 cm from pocket edge For darts at back sew 2 cm beyond the drill marking Notch: For assembling of all cut seams. For hemline + side pocket + zipper at fly + elastic waist band + attachment of waist band Templates For stitching of fly For placement of button and button hole at waist band Labelling 1 pcs care label: Left side 15 cm from top (see General Requirements) Print Size + identity print: Placement according to Printed size and identity instructions supplied by Region Midtjylland

4 Style description: Details Size: 2S - M - 6L Page: 4 of 11 Detail drawing Fly with zipper Sewing of fly Bartacks to reinforce zipper fly Zip guard behind zipper Reinforced with lock stitch at corner Folded at bottom Machine / stitch type: Seam allowance / tolerance: Follow general seam allowances and tolerances Detail drawing Side pocket back 20cm pocket hemline front pocket sides towards front + bottom 24 cm pocket side towards back Pocket must be reinforced with bartacks Machine / stitch type: Seam allowance / tolerance: Follow general seam allowances and tolerances

5 Style description: Details Size: 2S - M - 6L Page: 5 of 11 Detail drawing Hemline at leg Bar tack Sleeve folding stitching 4.8 cm slit 4.5 cm Machine / stitch type: 301 Seam allowance / tolerance: Follow general seam allowances and tolerances Detail drawing Logo elastic at sides of waist band front back Side view Machine / stitch type: Seam allowance / tolerance: Follow general seam allowances and tolerances

6 Style description Size: 2S - M - 6L Page: 6 of 11 Description Side seam with safety machine 516 Side seam with overlock 20 cm up for split seam at hemline both legs machine 504 Backseam with double stitch machine Inseam with safety machine 516 Waistband with single stitch at flat parts 301 Waistband with single stitch up against trouser at elasticated parts

7 F I A1 C E 18 CM D 6.5 CM 4.5 cm J back 20cm Side pocket back 24 cm FRONT FRONT front Side view front A3 7.5 cm 10 cm 10 cm Placement of Side pocket seam according to side 12.5 cm BACK BACK Size: 2S - M - 6L Page: 7 of 11 Green measures are fixed measurements in all sizes H A2 Cut lenth of elastic band inside waistband Red mereasures are referring to measurement chart B G A Side seam Side seam No scale Measurement Chart 12 CM 15.0 CM

8 2S S S M The placement of the left and right side pockets must be symmetrical The hemline of the chest pocket must be horizontal The collar centre front must be parallel when closed Comments: A A1 A2 A3 B C D E F G H I J ½ Waist width - stretched ½ waistband centre front to elastic Waistband centre back to elastic Elastic cut length ½ Hip width measured 15 cm below waistband at side ½ Thigh width measured 6.5 cm below crotch level ½ Knee width measured 18 cm from hem ½ Hem width Inside leg length Crotch depth front. exclusive waistband Crotch depth back. exclusive waistband Zipper length Centre back to dart L L L L L L L Measurement Chart Size: 2S - M - 6L Page: 8 of 11

9 Pattern Overview Size: 2S - M - 6L Page: 9 of WAISTBAND ETRA 12

10 Fabric requirements Size: 2S - M - 6L Page: 10 of 11 Product data Main fabric Weave: Satin Quality: 30cvcx16cvc Fiber: 45% Polyester 55% Cotton Squaremeter weight: 225 g/m2 Colour: White / Navy Tolerances Pilling martindale DS/EN ISO :2000 End note at scale, 5 best value Pilling: 4-5 Abrasion resistance Tearing strength DS/EN ISO :1999 Stress: : 9kPa (Meas: 2 threads are broken) DS/EN ISO :2000 Mean in Newton Warp thread 45 Newton Weft thread 45 Newton note: rubs N

11 Trimming requirements Size: 2S - M - 6L Page: 11 of 11 Product data Others Article no: Composition: Slider: Zamac & Brass combination, plated Tape: Polyester Elements: Brass (oxidized) Size: Size 3. Metal zipper with auto-lock slider. Closed-end Colour: Tape colour matching fabric colour Photo: Product data Others Article no: Composition: Nylon 6.6 Size: 27 Colour: Colour matching fabric colour Photo: Product data Others Article no: Logo elastic Composition:???? Size: Width: 35 mm Colour: White, Navy Photo: