Fujitsu Technology Solutions

Transcription

1 Fujitsu Technology Solutions SKP software for SKP and SKP Version 2.0A REV=0203 June 2011 Release Notice All rights reserved, including intellectual property rights. Technical data subject to modifications and delivery subject to availability. Any liability that the data and illustrations are complete, actual or correct is excluded. Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may infringe the rights of such owner. Copyright Fujitsu Technology Solutions 2011

2

3 1 General Ordering Delivery Documentation 2 2 Software extensions Graphical user interface Teleservice Copying BS2000 CDs and DVDs Channel connection of the SKP Password backup Service access to HNC 3 3 Technical information Resource requirements Software configuration Product installation Product use BS2000 generation Remote access Obsolete functions Incompatibilities Restrictions BS2000-IPL from CD FST operation 6 4 Hardware requirements SKP hardware Channel hardware for S servers 6 5 Firmware levels 7

4 1 General This Release Notice is a summary of the major extensions, dependencies and operating information to the SKP software SV2.0A. The release level is that of June 2011 This Release Notice is delivered on the docmentation CD. This and other current release notices are available on the SoftBooks DVD and online under Ordering The software is delivered with a Field Change Order for the SKP The FCO is ordered by Service and installed in the SKP at the customer s. The software does not have to be ordered separately. With SKP you get this software. The software is delivered preinstalled with SKP hardware and does not have to be ordered separately. The software of SKP and SKP is subject to the general terms and conditions of the software product use and service agreement. 1.2 Delivery The SKP software SV2.0A0203 for SKP and is delivered on CD- ROM/DVD data media. The complete extent is delivered on one DVD Name: SKP 3970 V2.0A0203 and one documentation CD Name: SKP 3970 V2.0A0203 Documentation Contents: This Release Notice SV2.0A0203 User Manual SKP 3970 SKP Software V2.0 SKP / SKP Security Manual SKP Software V2.0 SQ Servers, SKP, HNC User Manuals for S Servers S155,S165,S175,S190,S200,S210 The descriptions on the documentation CD are also available as online manuals at The following delivery components are only needed on S servers: If the SKP is used, the optional REP A is required for IPL V16.0B and V17.0A (in VM2000 operation for the monitor system only). The REPs are supplied via SOLIS. Page 1

5 1.3 Documentation The following documentation is available for the SKP software SV2.0A: User Manual: SKP Software V2.0A Order No.: U41654-J-Z125-4 German Order No.: U41654-J-Z English Security Manual: SKP Software V2.0A Order No.: U41849-J-Z125-1 German Order No.: U41849-J-Z English The BS2000/OSD documentation is also available in German and English on DVD under the title BS2000/OSD SoftBooks. The documentation is available as online manuals under the following Internet address or can be ordered for an extra charge at In the manual shop only manuals are available for products which are still orderable. The manuals are also supplied as PDF files on the documentation CD. Page 2

6 2 Software extensions The 3970 (SKP) service/console processor is a system for the operation, monitoring, diagnosis and maintenance of all BS2000 servers in the S series. The SKP is based on PRIMERGY TX300-S3 (SKP ) or TX300-S6 (SKP ) server technology and the Linux operating system. Access to the system takes place uniformly, i.e. locally at the console as well as remotely via LAN, by means of the web interface. The extensions and enhancements compared to the previous SKP software version SV1.1A0004 are described below. 2.1 Graphical user interface The web interface has been adapted to suit that of the SQ servers. The role concept has in comparison with the software SV1.0A and SV1.1A been extended. Role-specific user profiles can be configured. 2.2 Teleservice In addition to the Modem-Teleservice via analog or ISDN modem, Internet- Teleservice via AIS-Connect is now also possible with the SV2.0A software. 2.3 Copying BS2000 CDs and DVDs The SKP Software SV2.0A can now also be used to copy BS2000 CDs. The copying of BS2000 CDs in the SKP drive is possible with SKP In addition to copying BS2000 CDs, it is also possible to copy BS2000 DVDs in the SKP drive with SKP Channel connection of the SKP The SKP is connected to the S server via an SKP host connector. The SKP host connector is a part of the SKP hardware and must be installed in the S server. 2.5 Password backup The passwords of the user profiles are automatically backed up and the backup can be used by Service for recovery. 2.6 Service access to HNC The SVP LAN of the SKP is now also used as the service LAN for access to the HNC, via which the connection to Teleservice is implemented; the HNC can be diagnosed, reset and switched on or off. Thus, the outdated V24 connection is no longer required. Page 3

7 3 Technical information 3.1 Resource requirements The SKP can be used on the current servers of the S series. A free slot must be available for the installation of the SKP host connector. 3.2 Software configuration The SV2.0A software of the SKP and consists of the basic system SLES 10 SP3 with security components and additional packages. BS2000/OSD version 5.0C is presumed if SKP is used. If the SKP is used, the optional REP A is required for IPL V16.0B and V17.0A. Therefore, SKP can only be used as of BS2000/OSD version 7.0B. A special release is required for OSD versions V5.0C and V Product installation The software is supplied as a Field Change Order for the SKP and is installed by the service engineer responsible for you. The software is delivered preinstalled with the SKP Any necessary new correction versions are supplied via SOLIS. The installation of these correction versions is performed by the service engineer responsible for you. 3.4 Product use BS2000 generation An SKP host connector, which has to be generated in the BS2000, is required in the S server in order to connect the SKP The channel statement for the IORSF generation is: CHN xx,ibf,a,mode=cnc Remote access For remote access to SKP and you need an Internet browser and a Java runtime environment on the PC in use. A window manager (e.g. Exceed) is no longer necessary for remote operation. The following prerequisites exist for the PCs to be used for remote operation: Supported browsers: Internet Explorer as of V7.0 Firefox as of V3.0 The browser must be configured as follows: Enable JavaScript Enable scripting of Java Applets Enable Cookies Page 4

8 JRE 6.0 is a prerequisite for the Java runtime environment. It is recommended that the latest version 6 is used. This is currently Update 25. If required, it can be downloaded under The following product version of the Java runtime system has been successfully tested for remote access: JRE V6 Update 22 and JRE V6 Update 25 Restrictions concerning the operability of the SKP cannot be ruled out in JRE versions that are not stated here. 3.5 Obsolete functions Compared to SKP and support is no longer provided for the following functions: The connection of alpha terminals (e.g. TC20) to the serial interface is no longer supported. It is thus no longer possible to connect an ATOP 3925 for system operation and monitoring. The connection of a radio clock or GTS 3925 (Global Time Server) to a serial interface is no longer supported. The NTP protocol version 1 of the GTS 3925 is not accepted by the SKP and (the NTP time packages sent by the global time server do not pass the authentication test of the current NTP version). Alternatively, a more modern NTP time server can be used. The direct connection of a printer (e.g. for printing KVP logging) is no longer supported. 3.6 Incompatibilities Compared to the old SKP and different IP addresses are used for the LOCLAN and we recommend that another name be used for the BCAM configuration (see example). Example for the BCAM configuration and the new IP addresses for the BS2000- native or VM2000 monitor system: /BCIN LBSVM1,GEN=L,DEV=(W0,W1),PROF=(,IP,CSMACD),- IPADR=(192,168,138,21),SLOW-POLL=ON /BCIN SKP,GEN=N,ROUTE=LBSVM1,PROF=(TCP,IP),- IPADR=(192,168,138,12),SLOW-POLL=ON /BCMAP FU=DEF,SUB=GLOB,NA=PRSCX,ES=SKP,PPORT#=1156,- PTSEL-I='PRSCX ' For the redundant SKP /BCIN LBSVM1B,GEN=L,DEV=(V0,V1),PROF=(,IP,CSMACD),- IPADR=(192,168,139,21),SLOW-POLL=ON /BCIN SKPB,GEN=N,ROUTE=LBSVM1B,PROF=(TCP,IP),- IPADR=(192,168,139,12),SLOW-POLL=ON /BCMAP FU=DEF,SUB=GLOB,NA=PRSCX,ES=SKPB,PPORT#=1156,- PTSEL-I='PRSCX ' With the old SKP and under SINIX-Z, a separate small LAN network was used for each LOCLAN. This is now no longer valid. Page 5

9 3.7 Restrictions BS2000-IPL from CD After an IPL has been performed from a BS2000 Firststart CD/DVD, the CD/DVD cannot be removed from the drive of the SKP , because the eject function is inactive at this point in time. On the web interface it is necessary to press the button Restart in the menu BS2000 Devices Tape Drives for the CD-ROM device. The CD/DVD can then be removed after the Reject button on the DVD drive has been pressed. An IPL from a BS2000 Firststart CD/DVD is currently not possible on the SKP with SV2.0A0203 software FST operation On the local console of the SKP, the GNOME terminal is not suitable for the FST maintenance tool (SVP-Frame display program for the maintenance engineer), because junk characters are output. An additional Xterm window must be opened with the command xterm & as a bypass or the WEB interface terminal window must be used under SKP Management Administration - CLI. 4 Hardware requirements The SV2.0A0203 software will only run on the supplied SKP hardware. 4.1 SKP hardware SKP SKP Primergy TX300-S3 Primergy TX300-S6 4.2 Channel hardware for S servers An SKP host connector (3970-HC) is required to connect an SKP to an S server (S145 to S210). This is an integral part of the hardware of the SKP A free slot must be available in the S server for the installation of the host connector. Page 6

10 5 Firmware levels (minimum levels) SKP TX300-S3 BIOS Version: 4.06 Rev irmc FW: 1.73A_sdr02.10 LAN FW: Release 2.20 SKP TX300-S6 BIOS Version: 6.00 Rev irmc FW: 5.51A_sdr03.10 LAN FW: Release 2.00 Page 7