Designed by Robert Kaufman Fabrics

Size: px

Start display at page:

Download "Designed by Robert Kaufman Fabrics"

Kelley Haynes
5 years ago
Views:

Just KARYUKAI Kisses Designed by Robert Kaufman Fabrics www.robertkaufman.

1 Just KARYUKAI Kisses Designed by Robert Kaufman Fabrics Featuring Finished quilt measures: 54 x 72 Quilt shown in colorstory. For alternate colorstories see pages 8-9. For questions about this pattern, please Patterns@RobertKaufman.com.

Fabric and Supplies Needed Fabric amounts based on yardage

A SRKM-15941-199 2/3 yard (one full panel) E

1-3/8 F SRKM-15946-199 C SRKM-15942-199 G SRKM-15692-186

2016, Robert Kaufman For individual use only - Not for

all of the instructions before beginning.

noted. - Press seam allowances open unless otherwise noted.

- Right sides together has been abbreviated to RST.

From Fabric A: trim the panel to 20-1/2 x 40-1/2 Notes

2 Fabric and Supplies Needed Fabric amounts based on yardage that is 44 wide. A SRKM /3 yard (one full panel) E SRKM B SRKM CHARCOAL *includes binding 1-3/8 F SRKM C SRKM G SRKM SILVER D SRK H SRKM /4 Copyright 2016, Robert Kaufman For individual use only - Not for resale You will also need: 3-s for backing - Read through all of the instructions before beginning. - All of the seam allowances are 1/4 unless otherwise noted. - Press seam allowances open unless otherwise noted. - Width of fabric (WOF) is equal to at least 44 wide. - Right sides together has been abbreviated to RST. - Remember to measure twice and cut once! From Fabric A: trim the panel to 20-1/2 x 40-1/2 Notes Before You Begin Cutting Instructions From Fabric B, cut: six strips 2 x WOF. Sew together, end-to-end, then trim to yield: Two inner border strips at 2 x 45-1/2 page 2

3 Two inner border strips at 2 x 62-1/2 four strips 1-1/2 x WOF. Subcut: two panel frame pieces 1-1/2 x 22-1/2 two panel frame pieces 1-1/2 x 40-1/2 eight strips 2-1/2 x WOF Sub cut sixteen squares at 2-1/2 Set aside remaining strips for binding one strip 7-1/4 x 7-1/4 Sub cut one square at 7-1/4 Sub cut four pieces 4 x 5 From Fabric C, cut: three strips 2-1/2 x WOF Sub cut two pieces 2-1/2 x 20-1/2 Set aside two strips for strip piecing one strip 6-1/2 x WOF Sub cut sixteen strips 2-1/2 x 6-1/2 From Fabric D, cut: two strips 2-1/2 x WOF, set aside for strip piecing one strip 7-1/4 x 7-1/4 Sub cut one square at 7-1/4 Sub cut two squares at 6-1/2 From Fabric E, cut: four strips 2-1/2 x WOF, set aside for strip piecing one strip 3 x WOF Sub cut four squares at 3 From Fabric F, cut: four strips 3 x WOF. Sew together, end-to-end, then trim to yield: two strips at 3 x 26-1/2 two strips at 3 x 46-1/2 From Fabric G, cut: four strips 3 x WOF. Sew together, end-to-end, then trim to yield: two strips at 3 x 26-1/2 two strips at 3 x 46-1/2 From Fabric H, cut: three strips 4 x WOF. Sew together, end-to-end, then trim to yield: Two outer border strips 4 x 45-1/2 four strips 5 x WOF. Sew together, end-to-end in pairs, then trim to yield: Two outer border strips 5 x 65-1/2 one strip 6 x WOF Sub cut eight pieces 3 x 6 page 3

4 Assemble the Quilt Center Step 1: Sew the 1-1/2 x 40-1/2 panel frame pieces to the sides of the quilt panel. Press toward the strips. Sew the 1-1/2 x 22-1/2 panel frame pieces to the top and bottom of the quilt panel. Press toward the strips. Step 2: Mark a diagonal line on the back of each Fabric B 2-1/2 square. Place each square RST at the end of each 6-1/2 Fabric C piece. Sew on the marked diagonal, then trim the excess fabric away, leaving a 1/4 seam allowance. Note the quantities for each orientation. These will be referred to as the Angled Border. Make 2 Make 14 Step 3: Sew the Angled Border pieces together as illustrated, paying careful attention to the orientation. Sew the side pieces to the quilt center fi rst, then the top and bottom pieces, pressing all toward the angled border. page 4

5 Assemble the Strip Pieced Border Step 4: Sew the 2-1/2 strip piecing units together along the longest sides, in the following order: Fabric E - Fabric C - Fabric E - Fabric D - Fabric E - Fabric C - Fabric E - Fabric D. Press all seams to one side. Cut the strip pieced unit into 3-1/2 wide units. Step 5: Sew the units from Step 4 together, along the short sides, until there are two units comprised of thirteen pieces and two units comprised of twenty-three pieces. Some pieces from the strip pieced units will need to be separated with a seam ripper to achieve the exact number needed. This will yield: two side units 3-1/2 x 46-1/2 two top and bottom units 3-1/2 x 26-1/2 Step 6: Sew a 46-1/2 unit from Step 5 between a 46-1/2 Fabric F and Fabric G strip. Press away from the center of the strip. Repeat to make a second side border. Sew a 26-1/2 unit from Step 5 between a 26-1/2 Fabric F and Fabric G strip. Press away from the center of the strip. This is the top Strip Pieced Border. Repeat to make the bottom Strip Pieced Border. page 5

Step 7: Place the 7-1/4 Fabric B and D squares RST. Mark a diagonal line on the wrong side of one square. Sew 1/4 away from both sides of the marked line.

Repeat the HST process with both blocks, being sure to place the marked line perpendicular to the seam on the HST. Trim each of the four resulting blocks to 6 square.

8: Gather one block from Step 7, 3 x 6 Fabric H rectangles and one 3 Fabric E square. Sew together into two rows of two to create the corner blocks, pressing seams to one side.

6 Step 7: Place the 7-1/4 Fabric B and D squares RST. Mark a diagonal line on the wrong side of one square. Sew 1/4 away from both sides of the marked line. Cut along the line and press the seam to one side, creating two HSTs. Trim to 6-1/2 square. Place a 6-1/2 Fabric D square RST with each of the HSTs. Repeat the HST process with both blocks, being sure to place the marked line perpendicular to the seam on the HST. Trim each of the four resulting blocks to 6 square. Wrong side of Fabric D Wrong side of Fabric D Wrong side of Fabric B Marked diagonal - Stitch 1/4 on either side Trim to 6-1/2 square Marked diagonal - Stitch 1/4 on either side Trim to 6 square Step 8: Gather one block from Step 7, 3 x 6 Fabric H rectangles and one 3 Fabric E square. Sew together into two rows of two to create the corner blocks, pressing seams to one side. Note the orientation of each of the four blocks- there are two blocks of each orientation. Step 9: Sew one block from Step 8 to each end of a top/bottom Strip Pieced Border unit. Note the orientation of the blocks in the illustration. Press seams away from the blocks. Repeat with the remaining top/bottom border piece. Step 10: Sew the side Strip Pieced Border units to the sides of the quilt. Press toward the border. Sew the borders from Step 9 to the top and bottom of the quilt, noting the orientation in the Quilt Assembly Diagram. Press seams toward the border. page 6

7 Add the Final Borders Quilt Assembly Diagram Step 11: Sew the 62-1/2 Fabric B strips to the sides of the quilt. Sew the 45-1/2 strips to the top and bottom of the quilt. Press all seams toward the outer border. Step 12: Sew the 4 x 5 Fabric B rectangles to either end of the Fabric H 4 x 45-1/2 border pieces. Press toward the rectangles. Repeat to create a second border unit. Step 13: Sew the 5 x 65-1/2 Fabric H strips to the sides of the quilt. Sew the units from Step 12 to the top and bottom of the quilt. Press all seams toward the outer border. Your quilt top is now complete! Baste, quilt, bind and enjoy! page 7

8 KARYUKAI Fabric and - Vintage Supplies Colorstory Needed Fabric and Supplies Needed Fabric amounts based on yardage that is 44 wide. A SRKM /3 yard (one full panel) E SRKM GREEN B SRKM *includes binding 1-3/8 F SRKM IVORY C SRKM G SRK GREEN D SRK H SRKM /4 Copyright 2016, Robert Kaufman For individual use only - Not for resale You will also need: 3-s for backing page 8

9 KARYUKAI Fabric and - Crimson Supplies Colorstory Needed Fabric and Supplies Needed Fabric amounts based on yardage that is 44 wide. A SRKM CRIMSON 2/3 yard (one full panel) E SRKM RED B SRKM BLACK *includes binding 1-3/8 F SRK GREEN C SRKM CRIMSON G SRKM IVORY D SRK CRIMSON H SRKM CRIMSON 1-1/4 Copyright 2016, Robert Kaufman For individual use only - Not for resale You will also need: 3-s for backing page 9

Just Kisses THE WOMAN IN GOLD

Just Kisses THE WOMAN IN GOLD Designed by Robert Kaufman Fabrics www.robertkaufman.com Featuring Finished quilt measures: 64 84 Pattern Level: Confident Beginner I have basic block construction down and