ACCOSMART. SANDWICH COT.
|
|
- Clarence Bennett
- 5 years ago
- Views:
Transcription
1 ACCOSMART. SANDWICH COT. EN
2 WE LIVE TEXTILE. 2 ACCOSMART
3 Accotex AccoSmart The new Accotex AccoSmart Sandwich-Cots are based upon a completely new, revolutionary technology platform. By combination of two tailor-made, high quality elastomer layers, AccoSmart cots feature higher deformation and provide larger contact surfaces compared to conventional one-layer soft cots. Concept & Functionality Cot based upon two different elastomer-layers - Combination: soft inner-layer and hard outer-jacket - Requirement to spin fibers into yarn is detached from the inner-layer - Room for additional functionalization of the inner-layer Spin-Technological Capabilities Combination of unique designed inner-layer and outer-jacket offers additional synergies: - Longer service lifetime - Less maintenance - Longer grinding-cycles due to high abrasion resistance, mechanical stability and low crack sensitivity of the outer-jacket, while maintaining yarn quality (Ustervalues: CV%, IPI) at J-463 level ACCOSMART 3
4 Accotex AccoSmart Features and Benefits f f Longer service life time Enabled by special compound and design concept f f Stable yarn quality Constant yarn evenness, less imperfections, less end breaks f f Wide yarn count range Three different types suitable for all kinds of fibers and applications f f High abrasion resistance Specially designed premium rubber compounds enable longer grinding cycles and less maintenance f f Low crack sensitivity High mechanical stability provides longer grinding cycles f f Standard grinding behavior Maintenance similar to standard grinding procedure 4 ACCOSMART
5 Technological Background With the introduction of the new Accotex AccoSmart technology platform, the concept of shore hardness to determine the quality of a cot cannot be applied anymore. Technically, the contact-surface between cot and yarn predominantly accounts for yarn quality. The contact-surface is directly related to the amount of deformation of the cot. Due to the unique combination of two tailor-made elastomer layers, AccoSmart cots feature higher deformation compared to conventional one-layer cots. Enhanced Contact Area Standard-spinning cots versus new AccoSmart cots. Contact area Weighting arm load [dan] AS-6 AS-7 AS-8 J-463 J-470 J-476 ACCOSMART 5
6 Added value longer service lifetime In general soft cots produce superior yarn quality values as the softer the surface of the cot, the longer the contact area. However, the lifetime of cots is restricted by the wear and tear properties of the cot. Solution The new AccoSmart achieves an improved service lifetime on the same yarn quality-level of a soft cot through its unique combination of a very soft inside layer and a harder elastomer outer layer. This combination provides the optimum solution to a longer service life time. Service lifetime + Improved lifetime Added value Same quality level Hardness + + Yarn quality / Contact length Sandwich cot One layer cot Added value 6 ACCOSMART
7 Added value yarn quality By contrast, the use of a hard cot achieves a longer service lifetime due to better abrasion resistance, but adversely affects the yarn quality due to the hardness of the cot material. There is ultimately a trade-off between the hardness of the cot material and the quality of the yarn. Solution The AccoSmart achieves improved yarn quality and the same service lifetime when compared to a conventional spinning cot. It achieves improved yarn quality because of the unique combination of two independent layers with individual properties which influence the yarn quality positively. Service lifetime + At same lifetime Added value Improved quality Hardness + + Yarn quality / Contact length Sandwich cot One layer cot Added value ACCOSMART 7
8 Key Performance Features Grinding behavior Yarn range 100 Service life (compact) Abrasion resistance Service life (ring-spinning) Working layer Yarn quality CV%, IPI Consistency of yarn quality over cot lifetime AccoSmart AS-7 63 ShA conventional Soft-Cot 8 ACCOSMART
9 Selected field test results Material Mill reference AS-7 100% Cotton, Ne 86/1; Compact CV% % % % grinding cycle standard +72% 100% Cotton, combed; Ne 60 CV% % % % ACCOSMART 9
10 Product Range Soft Version AS-6 - Fine counts - Cotton fiber - Compact applications Medium Version AS-7 - Fine to medium counts - All kinds of fibers - Compact and conventional applications Hard Version AS-8 - Medium coarse counts - All kinds of fibers - All kinds of applications 10 ACCOSMART
11
12 Saurer Technologies GmbH & Co. KG Elastomer Components Gustav-Stresemann-Weg Münster Germany T F info.accotex@saurer.com Subject to alterations Reprint only with expressed permission of Saurer Technologies Accotex-BR-Accosmart-EN Saurer (Jiangsu) Textile Machinery Company Limited Shanghai Branch Company 36F, Tower B, The HQ No. 100 Zunyi Road Shanghai P. R. China T F Saurer (Jiangsu) Textile Machinery Company Limited No. 9 Chang Yang Street, Suzhou Industrial Park, Jiangsu Province P. R. China T F
POLYMERIC SOLUTIONS. COTS AND APRONS.
POLYMERIC SOLUTIONS. TS AND APRONS. EN WE LIVE TEXTILE. 2 POLYMERIC SOLUTIONS Accotex Cots and Aprons Accotex Cots Benefits Perfect running behavior - Excellent cot performance and thus stable yarn quality
More informationPOLYMERIC SOLUTIONS. COTS AND APRONS. WE LIVE TEXTILE.
POLYMERIC SOLUTIONS. TS AND APRONS. WE LIVE TEXTILE. EN WE LIVE TEXTILE. Saurer Components is a world-leading supplier of components for filament and staple fiber spinning applications. With its headquarters
More informationRINGS AND TRAVELLERS. RING SPINNING. WE LIVE TEXTILE.
RINGS AND TRAVELLERS. RING SPINNING. WE LIVE TEXTILE. EN WE LIVE TEXTILE. Saurer Components is a world-leading supplier of components for filament and staple fiber spinning applications. With its headquarters
More informationPK 5000 SERIES. WEIGHTING ARMS.
PK 5000 SERIES. WEIGHTING ARMS. EN WE LIVE TEXTILE. PK 5000 SERIES PK 5000 Series Weighting Arms The standard drafting system for short staple roving frames Completely pneumatic drafting system The Series
More informationGLASS TWISTER. HIGH-PERFORMANCE RING TWISTING MACHINE. GLASS FILAMENT TWISTING.
GLASS TWISTER. HIGH-PERFORMANCE RING TWISTING MACHINE. GLASS FILAMENT TWISTING. EN Competence in Twisting. Twisting and cabling systems Allma in Kempten and Volkmann in Krefeld form the Allma Volkmann
More informationASSEMBLY WINDER PPW-A. PRECISION PROPELLER WINDING. STAPLE FIBRE YARNS.
ASSEMBLY WINDER PPW-A. PRECISION PROPELLER WINDING. STAPLE FIBRE YARNS. EN Precision assembly winding means better twisting. Assembly winding and twisting systems On precision assembly winding machines,
More informationALLMA CUSTOMER SUPPORT. TRAINING PROGRAMME. CABLING AND TWO-FOR-ONE TWISTING MACHINES.
ALLMA CUSTOMER SUPPORT. TRAINING PROGRAMME. CABLING AND TWO-FOR-ONE TWISTING MACHINES. EN WE LIVE TEXTILE. Customer Support We don t just talk about... Dear customer The main asset of a company is its
More informationFUSION TWISTER. ALWAYS ONE STEP AHEAD. STAPLE FIBRE TWISTING.
FUSION TWISTER. ALWAYS ONE STEP AHEAD. STAPLE FIBRE TWISTING. EN Competence in Twisting. Twisting and Cabling Systems Allma in Kempten and Volkmann in Krefeld form the Allma Volkmann Business Unit in the
More informationUSTER ZWEIGLE TWIST TESTER 5
USTER ZWEIGLE TWIST TESTER 5 APPLICATION REPORT Measurement and significance of yarn twist THE YARN PROCESS CONTROL SYSTEM R. Furter, S. Meier September 2009 SE 631 Copyright 2009 by Uster Technologies
More informationCOMPACT TWISTER. SETS NEW BENCHMARKS. STAPLE FIBRE YARNS.
COMPACT TWISTER. SETS NEW BENCHMARKS. STAPLE FIBRE YARNS. EN Competence in Twisting. Twisting and cabling systems Allma in Kempten and Volkmann in Krefeld form the Allma Volkmann Business Unit in the Saurer
More informationRecommendations for cot grinding
The purpose of cot grinding: Recommendations for cot grinding 1. To remove at least 0.25 mm rubber in order to get a layer of fresh rubber. At the same time one should ensure not to remove more than 0.3
More informationBräcker AG. Press Release / Internet News. Winterthur, March 27 th ITM Istanbul, Turkey Hall 2 / Booth 213/A
Rieter Machine Works Ltd. Klosterstrasse 20 P.O. Box CH-8406 Winterthur T +41 52 208 71 71 F +41 52 208 71 00 www.premium-texile-components.com Contact for Technical Press Silvano Rufo, Head Marketing
More informationZINSERIMPACT 72. DRIVING GROWTH.
ZINSERIMPACT 72. DRIVING GROWTH. EN What does progress mean today in compact spinning technology? And what is the best equipment for companies that want to grow? It is best to enhance decades of experience
More informationSchlafhorst at ITMA Asia + CITME in Shanghai
Schlafhorst at ITMA Asia + CITME in Shanghai UEBACH-PALENBERG, GERMANY 15.05.2014 The German textile machinery manufacturer Schlafhorst will be appearing at ITMA Asia + CITME in Shanghai from 16 to 20
More informationEPOCA 7. THE INNOVATIVE EMBROIDERY SYSTEM.
EPOCA 7. THE INNOVATIVE EMBROIDERY SYSTEM. EN Textile Creations for the Future. Saurer Embroidery is worldwide market leader for embroidery production systems. The vast expertise of many generations is
More informationUSTER STATISTICS 2013
USTER STATISTICS 2013 Application Report Easy User Guide Copyright 2013 by Uster Technologies AG All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, translated
More informationu AFIS PRO 2 The fiber process control system
u AFIS PRO 2 The fiber process control system Route to best practices in yarn manufacturing Information is virtually useless if not exploited to maximum advantage. That is why the USTER AFIS PRO 2 shows
More informationEffect of Ring Machine Front Roller Rubber Cot Hardness on Properties of Coarser Yarn
Effect of Ring Machine Front Roller Rubber Cot Hardness on Properties of Coarser Yarn Abdul Rehman Akbar 1, 2,, Muhammad Zeshan 3, Mohammad Neaz 2, Yingjie Cai 1, 4 1, 2, 4, a, and Lina Lin 1 Hubei Provincial
More informationThe Rieter Business Model
Business Model 2 Rieter Group. Business Model The Rieter Business Model Raw materials Spinning process Ring Cotton Man-made fibers Spinning preparation Compact Air-jet Cellulose Linen Rotor Around 94 million
More informationBräcker, Graf, Novibra and Suessen Experience the difference
Contact for Technical Press: Silvano Rufo, Head Marketing T +41 52 208 82 24 Premium Textile Components F +41 52 208 80 61 Rieter Machine Works Ltd. Klosterstrasse 20 silvano.rufo@rieter.com CH-8406 Winterthur
More informationGeschäftsbericht Business Model
Geschäftsbericht Business Model 2 Rieter Group. Business Model RIETER BUSINESS MODEL Raw Materials Spinning Process Ring Cotton Man-made fibers Spinning preparation Compact Rotor Linen Cellulose Air-jet
More informationWearit Global Limited
+91-8048582016 Wearit Global Limited https://www.wearitgroup.in/ Wearit Group has been progressing with its strong commitment to quality, innovation.co. has increased its capacity to approx. 2 Lacs spindles,
More information+91-8048582016 Wearit Global Limited http://www.wearitgroup.in/ Wearit Group has been progressing with its strong commitment to quality, innovation.co. has increased its capacity to approx. 2 Lacs spindles,
More informationBräcker, Graf, Novibra and Suessen Experience the difference
Contact for Technical Press: Silvano Rufo, Head Marketing T +41 52 208 82 22 Premium Textile Components F +41 52 208 83 82 Rieter Machine Works Ltd. Klosterstrasse 20 silvano.rufo@rieter.com CH-8406 Winterthur
More informationThe effect of short fibre and neps on Murata vortex spinning
Vol 23, No 1, page 28 January-February, 2002 The Australian Cottongrower The effect of short fibre and neps on Murata vortex spinning By Stuart Gordon, CSIRO Textile and Fibre Technology Murata vortex
More informationA Detailed Study on Effective Floating Fibre Control in Ring Frame and its Impact on Yarn Quality
A Detailed Study on Effective Floating Fibre Control in Ring Frame and its Impact on Yarn Quality S.Sundaresan 1, A.Arunraj 2, Dr.K.Thangamani 3 Assistant Professor (SRG), Department of Textile Technology,
More informationInternational Journal on Textile Engineering and Processes ISSN Vol. 2, Issue 4 October 2016
Impact of Latest Card on Yarn Quality Mr. Chirag Patil 1, R.D.Parsi 2, Mr. R. N. Mehta 3 1-Supervisor, Alok Industries Ltd., Silvassa, 2-CTF, MPSTME NMIMS, SHIRPUR 3- General Manager, The Ruby Mills Ltd.
More informationHIGHER QUALITY. FASTER MOULDS.
HIGHER QUALITY. FASTER MOULDS. Established in 1952, SCHÖTTLI has evolved from pioneer of the injection moulding industry to global player and specialist for developing and manufacturing moulds and complete
More informationCompact Yarn Technology for top quality & flexibility
Compact Yarn Technology for top quality & flexibility MARZOLI Compact Yarn / Marzoli Mac3000 OUTSTANDING YARN QUALITY GREAT FLEXIBILITY SUITABLE WITH VARIOUS TYPES OF FIBERS: COTTON, SYNTHETICS, BLENDS
More informationUster Technologies (Suzhou) Co.Ltd., Textile Laboratory Testing Services
Uster Technologies (Suzhou) Co.Ltd., Textile Laboratory Testing Services 1. Test items Textile testing on fibers 1 2 USTER HVI 1000 Bundle fiber testing Determination of fiber fineness, maturity index,
More informationTECHNICAL BULLETIN Weston Parkway, Cary, North Carolina, Telephone (919)
TECHNICAL BULLETIN 6399 Weston Parkway, Cary, North Carolina, 27513 Telephone (919) 678-2220 TRI 1016 RANDOM SLUB ROTOR YARN PRODUCTION ON CONVENTIONAL EQUIPMENT 2004 Cotton Incorporated. All rights reserved;
More informationUSTER STATISTICS 2013 Application Report
3 USTER STATISTICS 2013 Application Report Easy User Guide Textile Technology / January 2013 / SE 670 Copyright 2013 by Uster Technologies AG. All rights reserved. All and any information contained in
More informationSelection of appropriate ring traveller number for different count of cotton hosiery yarn
International Journal of Engineering & Technology IJET-IJENS Vol: 11 No: 06 70 Selection of appropriate ring traveller number for different count of cotton hosiery yarn 1 Jamal Hossen, 2 Subrata Kumar
More informationUSTER TESTER 5-S800 APPLICATION REPORT. The purpose of trash and dust measurement in spinning mills THE YARN INSPECTION SYSTEM
USTER TESTER 5-S800 APPLICATION REPORT The purpose of trash and dust measurement in spinning mills THE YARN INSPECTION SYSTEM S. Dönmez Kretzschmar, R. Furter November 2008 SE 628 Copyright 2008 by Uster
More informationu ZWEIGLE The yarn analysis systems
u ZWEIGLE The yarn analysis systems Perfect partners for the ultimate in quality testing USTER instruments provide the essential foundation for world - class quality control in areas such as evenness (the
More informationGESTER INTERNATIONAL CO.,LTD TEL: FAX:
Shoes Accessories Testing Equipment GT-K19 Velcro Fatigue Tester This tester is applicable for repeatedly open and close motion for touch and close fasteners and velcro tapes. DIN 3415, BS EN ISO 22776,
More informationR 36. Semi-Automated Rotor Spinning Machine R 36. The direct path for good yarn quality at high productivity with easy operation
Rotor Spinning Rotor Spinning Machine R 36 R 36 Semi-Automated Rotor Spinning Machine R 36 The direct path for good yarn quality at high productivity with easy operation R 36 The R 36 is able to run full
More informationInternational Journal on Textile Engineering and Processes ISSN Vol. 2, Issue 4 October 2016
Effect of speed frame drafting systems on quality of ring yarn Mr. Vijay D. Chaudhari 1, Ajay Chaudhary 2, Vijay S. Shivankar 3 1,3. Centre for Textile Functions MPSTME, SVKM s NMIMS, Shirpur, Dhule, Maharashtra,
More informationElastic bonded abrasives
Elastic bonded abrasives ARTIFEX Dr. Lohmann GmbH & Co. KG Feldstrasse 8 DE 24568 Kaltenkirchen, Germany Phone: +49 (0) 4191 935-0 info@artifex-abrasives.de www.artifex-abrasives.de introduction Ceramic
More informationTECHNICAL BULLETIN Weston Parkway, Cary, North Carolina, Telephone (919)
TECHNICAL BULLETIN 6399 Weston Parkway, Cary, North Carolina, 27513 Telephone (919) 678-2220 TRI 1015 RANDOM SLUB RING YARN PRODUCTION ON CONVENTIONAL EQUIPMENT 2004 Cotton Incorporated. All rights reserved;
More informationBRILLIANT RESULTS PERFECT SURFACES IN 3 STEPS.
BRILLIANT RESULTS PERFECT SURFACES IN 3 STEPS. FIRST STEP PREPARATION Your tool: combination of abrasive cloth and non-woven material Remove the last scratches from the surface, e.g. with VSK VISION. You
More informationSPECIFIC CLASSIFICATION THE
USTER LVI Individual Solutions Specific classification The low-volume classification system Low-Volume Instruments Why low-volume instrument testing? Success or failure in yarn production depends mainly
More information62nd Plenary Meeting of the INTERNATIONAL COTTON ADVISORY COMMITTEE in Gdansk - Poland September 7-12, 2003 By: Peter Stahlecker
62nd Plenary Meeting of the INTERNATIONAL COTTON ADVISORY COMMITTEE in Gdansk - Poland September 7-12, 2003 By: Peter Stahlecker Page 1 EliTe CompactSet Recent Developments and Applications Gdansk, Poland
More informationOptimization of top roller diameter of ring machine to enhance yarn evenness by using artificial intelligence
Indian Journal of Fibre & Textile Research Vol. 33, December 2008, pp. 365-370 Optimization of top roller diameter of ring machine to enhance yarn evenness by using artificial intelligence M Ghane, D Semnani
More informationCARPET TWISTER. CARPET CABLER. FOR PERFECT CARPET YARNS. TWISTING CARPET YARNS.
CARPET TWISTER. CARPET CABLER. FOR PERFECT CARPET YARNS. TWISTING CARPET YARNS. EN Competence in Twisting. Twisting and cabling systems Allma in Kempten and Volkmann in Krefeld form the Allma Volkmann
More informationTesting and Services
Testing and Services Effective September 2017 August 2018 Mailing Address: Box 45019 Lubbock, Texas 79409-5019 Shipping Address: 1001 East Loop 289 Lubbock, Texas 79403-6518 Telephone: Fax: Email: Web:
More informationRing Spinning Ring Spinning Machine G 38 G 38. Ring Spinning Machine G 38. High-quality yarns produced with high performance
Ring Spinning Ring Spinning Machine G 38 G 38 Ring Spinning Machine G 38 High-quality yarns produced with high performance The G 38 is very flexible. The machine is supplied with a device for producing
More informationTABLE OF CONTENTS. 1 Basics Basic Textile Terms of Spinning Sequence of spinning process Material Flow in Spinning 4
Part No. Contents TABLE OF CONTENTS Page No. 1 Basics 1 1.1 Basic Textile Terms of Spinning 2 1.2 Sequence of spinning process 3 1.3 Material Flow in Spinning 4 2 Draw Frame 7 2.1 Functions of Draw Frame
More informationCARPET TWISTER. CARPET CABLER. FOR PERFECT CARPET YARNS. TWISTING CARPET YARNS.
CARPET TWISTER. CARPET CABLER. FOR PERFECT CARPET YARNS. TWISTING CARPET YARNS. EN Competence in Twisting. Twisting and cabling systems Allma in Kempten and Volkmann in Krefeld form the Allma Volkmann
More informationTECHNICAL BULLETIN Weston Parkway, Cary, North Carolina, Telephone (919)
TECHNICAL BULLETIN 6399 Weston Parkway, Cary, North Carolina, 27513 Telephone (919) 678-2220 TRI 1012 SELECTED QUALITY CONTROL RECOMMENDATIONS FOR PREPARING MID-RANGE COTTON YARNS 1992 Cotton Incorporated.
More informationKnives for the Veneer and Plywood Industry
Knives for the Veneer and Plywood Industry Knives for the veneer and plywood industry 2 3 Precision and Perfection: For optimal cutting performance, surface consistency and longevity. Our in-depth understanding
More informationAbrasive products for the automotive industry
Genuine STARCKE. Since 1829. Abrasive products for the automotive industry www.starcke.de Genuine Starcke. Since 1829. AUTOMOTIVE EXPERTISE Your partner throughout the manufacturing process 1. Stamping
More informationDO NOT TURN OVER THE PAGE UNTIL YOU ARE TOLD TO DO SO
ADVANCED DIPLOMA IN KNITWEAR STUDIES AND MERCHANDISING ADVANCED DIPLOMA IN APPAREL STUDIES AND MERCHANDISING Examination Paper 2 nd Term 2014 Module Name: Textile Materials and Evaluation Module Code:
More informationEXPERIENCE. Product and knowledge transfer within the Trützschler group: Trützschler Card Clothing
CARD CLOTHING EXPERIENCE 60 YEARS OF CLOTHING DEVELOPMENT TRÜTZSCHLER GROUP NETWORK 3,000 EMPLOYEES Trützschler Card Clothing is part of the global network of the Trützschler group, with some 3,000 employees.
More informationInfluence of yarn structure produced in different spinning systems on the properties of yarn
2018; 4(4): 172-176 ISSN Print: 2394-7500 ISSN Online: 2394-5869 Impact Factor: 5.2 IJAR 2018; 4(4): 172-176 www.allresearchjournal.com Received: 24-02-2018 Accepted: 25-03-2018 Assistant Professor, Bangladesh
More informationInternational Journal of Engineering & Technology IJET-IJENS Vol: 11 No: 06 75
International Journal of Engineering & Technology IJET-IJENS Vol: 11 No: 06 75 Optimization of Doubling at Draw Frame for Quality of Carded Ring Yarn A. Subrata Kumar Saha, B. Jamal Hossen Lecturer, Department
More informationShaper Cutters. Freud s Shaper Cutters and Performance System Cutters are revolutionary. Recognized for their versatility, quality, and innovation,
Shaper ters 240 Freud s Shaper ters and Performance System ters are revolutionary. ecognized for their versatility, quality, and innovation, Freud offers the flexibility to choose the cutter that fits
More informationSource:
Projects on the Implementation of Intelligent Manufacturing Program (Textile Machinery) Textile Machinery 1. 13th five-year plan of China National Textile and Apparel Council Smart (automatic) production
More informationProcessing Indian Raw Cotton
End Spinning ing Indian Raw Cotton Holger Neubauer Rieter Machine Works Ltd. Winterthur, Switzerland Harald Schwippl Rieter Machine Works Ltd. Winterthur, Switzerland ing Indian Raw Cotton Comparison of
More informationsecutex edge protector
secutex edge protector If the load has sharp edges or has a rough surface, suitable abrasion or edge protection must be used. secutex edge protectors are easy to handle and flexible to use. The optional
More informationCOMPANY PROFILE FAIR CLOTHINGS (PVT.) LTD FAIR KNITTING LIMITED. GULSHAN SPINNING MILLS LTD. ( A 100 % Export Oriented Knit Composite Industry )
COMPANY PROFILE OF FAIR CLOTHINGS (PVT.) LTD FAIR KNITTING LIMITED. ( A 100 % Export Oriented Knit Composite Industry ) GULSHAN SPINNING MILLS LTD. Fair Knitting Ltd., Fair Clothings (Pvt.) Ltd. & Gulshan
More information*The type of stainless steel were 316L, the diameter of the fiber were 12 micron.
Advanced Materials Research Submitted: 2014-07-21 ISSN: 1662-8985, Vol. 1053, pp 93-96 Accepted: 2014-07-28 doi:10.4028/www.scientific.net/amr.1053.93 Online: 2014-10-20 2014 Trans Tech Publications, Switzerland
More informationUSTER LABORATORY SYSTEMS
USTER LABORATORY SYSTEMS APPLICATION REPORT Improved analysis of yarns in the laboratory THE STANDARD FROM FIBER TO FABRIC Richard Furter Novmeber 2007 SE 611 Copyright 2007 by Uster Technologies AG All
More informationInternational Textile Center Hosts Trade Mission from Pakistan
Summer 5 International Textile Center Hosts Trade Mission from Pakistan In May, the International Textile Center, in cooperation with the Lubbock Cotton Exchange, hosted the visit of the Special Trade
More informationD&D: Dismantling and Release of Large Components at the GNS Premises in Duisburg on the Example of a CASTOR S1 Container 13536
D&D: Dismantling and Release of Large Components at the GNS Premises in Duisburg on the Example of a CASTOR S1 Container 13536 ABSTRACT Steffen Oehmigen*, Frank Ambos** GNS Gesellschaft für Nuklear-Service
More informationAIR JET SPINNING OF COTTON YARNS
TECHNICAL BULLETIN 6399 Weston Parkway, Cary, North Carolina, 27513 Telephone (919) 678-2220 TRI 1001 AIR JET SPINNING OF COTTON YARNS 2004 Cotton Incorporated. All rights reserved; America s Cotton Producers
More informationCover Fabric Series. Company Name: Wujiang Yeahome Textile Co., Ltd.
Company Name: Wujiang Yeahome Textile Co., Ltd. Address: Floor 9, No. 7 Building, Jincheng Commercial Centre, Shengze Town, Wujinag, Suzhou, Jiangsu, China Full Name: Ms. Lina Yang Telephone: 86-512-63181156
More informationInternational Journal on Textile Engineering and Processes ISSN Vol. 2, Issue 2 April 2016
Effect of Draw Frame Bottom Roller Gauge Setting on Yarn Quality Vijay Chaudhari 1, P. P. Raichurkar 2 Centre for Textile Functions, MPSTME, SVKM S NMIMS, Shirpur Campus raichurkar@gmail.com Abstract This
More informationOther Products Include: Textile Machinery Water Maters
8-10, KITA-ITAMI, ITAMI HYOGO 664-0831 JAPAN Overseas Sales Department TEL:(81)72-771-1112/1143 FAX:(81)72-772-7592 http://www.okk.co.jp E-mail:ovsd@okk.co.jp Technical Center S-Plant W-Plant Technical
More informationOther Products Include: Textile Machinery Water Maters
8-10, KITA-ITAMI, ITAMI HYOGO 664-0831 JAPAN Overseas Sales Department TEL:(81)72-771-1112/1143 FAX:(81)72-772-7592 http://www.okk.co.jp E-mail:ovsd@okk.co.jp Technical Center S-Plant W-Plant Technical
More informationCONTENTS. Sr No Contents Page No.
CONTENTS Sr No Contents Page No. 1. Basic Textile Terms of Spinning 1 2. Sequence of spinning process 2 3. Material Flow in Spinning 3 4. Functions of Ring Frame Machine 5 5. Details of Ring Frame Machine
More informationWePack PRIME The highest stability and running perfomance. Forming fabrics for packaging paper.
WePack PRIME The highest stability and running perfomance. Forming fabrics for packaging paper. www.andritz.com We accept the challenge! Your needs. Our motivation. At ANDRITZ, we draw our motivation for
More informationInternational Journal on Textile Engineering and Processes Vol. 3, Issue 1 January 2017
Effect of Twist on #Mr.K.R.Patil, #Mr.Kulabhaskar Sing, *Prof.P.P.Kolte, *Prof.A.M.Daberao, #Raymond Ind. Pvt. Ltd. Jalgaon. * CTF, SVKMs, NMIMS, MPSTME, Shirpur. Email:- kiranpk.rp.kp@gmail.com, prafullkolte@gmail.com.
More informationUSTER AFIS PRO 2 APPLICATION REPORT. Process control in spinning mills by single fiber testing. A field report THE FIBER PROCESS CONTROL SYSTEM
USTER AFIS PRO 2 APPLICATION REPORT Process control in spinning mills by single fiber testing A field report THE FIBER PROCESS CONTROL SYSTEM Editorial team, UTUS March 21 / Version 2, April 21 SE 636
More informationFor Frequencies up to 110 GHz. RPC-1.00 Connectors TEST & MEASUREMENT
For Frequencies up to 110 GHz RPC-1.00 Connectors TEST & MEASUREMENT degs Bending test of RPC-1.00 cable assembly, standard length Bending Test 90 @ R = 1 inch Difference of phase (before-after bending)
More informationFor timeless protection
For timeless protection Jotun Durasol For timeless protection Powder Coatings Architectural QUICK FACTS: Jotun Durasol Colours: 35* Finishes: Warranty: Matt 30 Years** For Buildings People Remember At
More informationCHAPTER 8 DEVELOPMENT AND PROPERTIES OF AIR JET-ROTOR SPUN YARNS
163 CHAPTER 8 DEVELOPMENT AND PROPERTIES OF AIR JET-ROTOR SPUN YARNS 8.1 INTRODUCTION Innovations are required in rotor spinning for improving the quality of yarn so that its application becomes quite
More informationYarn hairiness on ring spinning with modified yarn path
Indian Journal of Fibre & Textile Research Vol. 41, June 2016, pp. 221-225 Yarn hairiness on ring spinning with modified yarn path Xinjin Liu 1,a & Xuzhong Su 2 1 School of Textile and Clothing, 2 Key
More informationInfluence of Twisting Ratio and Loop Length on Loop Deflection of Flat Fabrics
32 Influence of Twisting Ratio and Loop Length on Loop Deflection of Flat Fabrics Jiaxuan Zhang College of Art and Appareluages, Tianjin Polytechnic University Tianjin 300160, China E-mail: dianzizhufu@tom.com
More informationInternational Journal on Textile Engineering and Processes, ISSN: Vol 1, Issue 4, October Priyadarshani Sahakari Soot Girni, Shirpur
International Journal on Textile Engineering and Processes, ISSN: 2395-3578 Influence of Cradle Spring Setting On Ring Yarn Quality 1 Ramesh N. Narkhedkar, 2 Mr. Vijay S. Patil 1 D.K.T.E S Textile and
More informationOverview of the Course
E -Learning Course for Cotton Fiber Testing and Processing Overview of the Course This E-Learning Course is a team work training for Process Improvement and Cost Reductions for Spinning and Ginning Mills.
More informationFECR. World Class Testing Equipments An ISO 9001 Certified co. FEC Footwear Testing Equipments
FECR World Class Testing Equipments An ISO 9001 Certified co. FEC Footwear Testing Equipments FEC Din Abbarassion Tester We are engaged in offering Abrasion Testing Machines that are used to determine
More informationAmerican International Journal of Research in Science, Technology, Engineering & Mathematics
American International Journal of Research in Science, Technology, Engineering & Mathematics Available online at http://www.iasir.net ISSN (Print): 2328-3491, ISSN (Online): 2328-3580, ISSN (CD-ROM): 2328-3629
More informationAWUKO - The lion amongst abrasives
The lion amongst abrasives 2 AWUKO - The lion amongst abrasives In 1899 August Wandmacher laid an important foundation for abrasives: The sandpaper cushion for sanding leather! For this, he took out an
More informationWe develop and produce quality knitwear by passionate people, high end technology and mastered processes to contribute brand customer success.
texim texim texim We develop and produce quality knitwear by passionate people, high end technology and mastered processes to contribute brand customer success. OUR FUTURE BUSINESS VISION IS: Who We Are
More informationABOUT US ABOUT US 1 CRANE CABLES
ABOUT US ABOUT US ÜNTEL KABLO, one of the leading cable manufacturers of Europe was established in 1972, Turkey. With almost 45 years of experience, it has been continuously developing and optimizing its
More informationOPERATING MANUAL. ba15358e03 09/2014 F 500 DIN, F 500 BNC F 800 DIN, F 800 BNC FLUORIDE SENSITIVE ELECTRODE
OPERATING MANUAL ba15358e03 09/2014 F 500 DIN, F 500 BNC F 800 DIN, F 800 BNC FLUORIDE SENSITIVE ELECTRODE F 500 / F 800 Note The latest version of the present operating manual can be found on the Internet
More informationTextile Technology :: "Spinning" By M.H.Rana
Textile Technology :: "Spinning" By M.H.Rana HOMEPAGE Recommended Textile spinning Articles COTTON MIXING BLOWROOM PROCESS CARDING PROCESS THEORY OF CARDING CARD CLOTHING Open End Spinning RING FRAME RINGS
More informationUSTER ZWEIGLE TWIST TESTER 5
USTER ZWEIGLE TWIST TESTER 5 APPLICATION REPORT USTER STATISTICS for twist measurement THE YARN PROCESS CONTROL SYSTEM Sandra Meier July 2009 SE 632 Copyright 2009 by Uster Technologies AG All rights reserved.
More informationspinner ContactleSS data & POwertransmission
spinner ContactleSS data & POwertransmission Edition A/2014 High Frequency Performance Worldwide www.spinner-group.com For more than 65 years, SPINNER Group has been setting new standards worldwide in
More informationULTRAHEAT / ULTRACOLD T330. The Evolutionary. Ultrasonic Heat Meter / Cooling Meter. Ultrasonic Heat Meter / Cooling Meter.
Ultrasonic Heat Meter / Cooling Meter Residential Ultrasonic Heat Meter / Cooling Meter The Evolutionary ULTRAHEAT / ULTRACOLD T330 Proven technology one step further T330 COMPACT Versatile installation
More informationNEW Product information
NEW Product information CL 200 Sharpening machine of TC-tipped circular saws on hook and clearance surface CL 200 The idea: Unique machining possibilities in only one clamping - especially for sharpening
More informationEffect of Fibre Blend Ratios on Yarn Properties
From the SelectedWorks of Innovative Research Publications IRP India Spring April 1, 2015 Effect of Fibre Blend Ratios on Yarn Properties Innovative Research Publications, IRP India, Innovative Research
More informationASSESSING RAW COTTON ON PREDICTED YARN QUALITY: A NEW APPROACH TO MARKETING COTTON
ASSESSING RAW COTTON ON PREDICTED YARN QUALITY: A NEW APPROACH TO MARKETING COTTON S. Yang and S. Gordon CSIRO Manufacturing, Waurn Ponds, Victoria, Australia Cottonspec, a yarn quality prediction program,
More informationREDEFINING TWISTING SOLUTIONS
REDEFINING TWISTING SOLUTIONS TWO FOR ONE TWISTER Over 30 years of proven success in the manufacture of textile machinery with an understanding of the future twisting needs, Veejay Lakshmi offers its customers
More informationULTRAHEAT / ULTRACOLD T330. The Evolutionary. Ultrasonic Heat Meter / Cooling Meter. Ultrasonic Heat Meter / Cooling Meter.
Ultrasonic Heat Meter / Cooling Meter Residential Ultrasonic Heat Meter / Cooling Meter The Evolutionary ULTRAHEAT / ULTRACOLD T330 Proven technology one step further T330 COMPACT Versatile installation
More informationGrade 02 Unit 04 Adapted Assessment Answer Booklet
Grade 02 Unit 04 Adapted Assessment Answer Booklet Directions for using this booklet: In this booklet you will find four options of Cotton Plant to Cotton Shirt (including the complete Original text which
More informationTURNING WITH HIGHEST EFFICENCY. FTC 160 Flexible Turning Center
TURNING WITH HIGHEST EFFICENCY FTC 160 Flexible Turning Center Precision hard turning of hardened gears Ultra rapid machine loader with double gripper FTC 160 Flexible Turning Center The self loading machine
More informationOCS Inspection System
OCS Inspection System CATENARY EYE is an advanced OCS inspection system developed by Meidensha s latest image processing technology on edge detection and pattern-matching Inspection / Measuring Items &
More informationTe x t i l e s P v t L t d
VIKING Te x t i l e s P v t L t d Profile It is our pleasure to introduce ourselves as one of the leading Manufacturers of the Knit-Wear garments both inner and outwear s.we have started our concern about
More information