Polymas Industrial Watertight Enclosure

Transcription

1 Polymas Industrial Watertight Enclosure Last Update April 2011

2 Euromas-Polymas These small control enclosures made of 30% glassbead-reinforced polyamide are especially suitable for fitting small electronics components and terminal blocks. They are used primarily in the industrial sector. The sturdy control enclosures, which provide good chemical resistance, are available with or without moulded-on cable glands and with or without quick-release fastening; ingress protection IP 65 (higher protection category available on request). Mounting bosses for self-tapping screws are provided for the assembly of terminal blocks, DIN rails or PCBs. 456

3 Enclosure material:polyamide 6, 30% glassbeadreinforced. For technical data see pages Colour: Grey, similar to RAL Scope of delivery: Upper and lower section; lid screws made of V2A, or quick-release fastening made of nickel-plated GD-ZN A14Cu1; depending on design with mouldedon cable glands Pg 11 including clamping cage, pressure screw and closed sealing ring. Ingress protection: IP65/DIN EN 60529; increased protection up to IP x7 on request. Lid seal: Types: PK 1... PK PK PK PK 1... SV PK 1... SV-111 PK 1... SV-211 PK 1... SV-411 Sponge cord (neoprene) in lid groove. For technical data see page 651. fastening, without moulded-on cable gland. fastening, 1 mouldedon cable gland, Pg 11, side 1. fastening, 2 mouldedon cable glands, Pg 11, 1x side 1+2. fastening, 4 mouldedon cable glands, Pg 11, 2x side 1 (PK101). fastening, without moulded-on cable gland. fastening, 1 mouldedon cable gland, Pg 11, side 1. fastening, 2 mouldedon cable glands, Pg 11, 2x side 1 (PK102). fastening, 4 mouldedon cable glands Pg 11, 2x side 1+2. All dimensions in mm. Please refer to technical data. Accessories (additional charge): M: Mounting plate, sheet steel, galvanised SIL: Lid with silicone seal TS 15: Top hat rail DIN EN TH15 Ext. dimensions (without cable gland) Model L W H PK 101* PK * PK * PK 101 SV PK 101 SV PK 101 SV PK 102* PK * PK * PK 102 SV PK 102 SV PK 102 SV PK 105* PK 105 SV PK 110* PK 110 SV PK 115* PK 115 SV * Also available with transparent lid for quantities exceeding 500 units. Lid material: polycarbonate. 457 Notes: Available with tranparent lid for quantities exceeding 500 units (see below) Cable glands, see page 614 ff. Tension range for moulded-on cable glands 8-10 mm Terminal assignment and machining on request.

4 Euromas-Polymas PK 101 PK PK 101 SV PK 101 G * Accessories (additional charge) SIL: Lid with silicone seal Z PK PK PK SV PK G * = Please see description on Accessories (additional charge) SIL: Lid with silicone seal Z PK PK PK SV PK G * = Please see description on Accessories (additional charge) SIL: Lid with silicone seal Z

5 PK PK 102 SV PK 102 G * PK 102 Accessories (additional charge) SIL: Lid with silicone seal Z PK PK SV PK G * = Please see description on PK Accessories (additional charge) SIL: Lid with silicone seal Z PK PK SV PK G * = Please see description on PK Accessories (additional charge) SIL: Lid with silicone seal Processing (drilling, milling, printing)? No problem! All dimensions in mm. Please refer to technical data. 459 Z

6 Euromas-Polymas PK 105 PK PK 105 SV PK 105 G * Standard accessories M: Mounting plate, sheet steel, galv SIL: Lid with silicone seal TS 15: Top hat rail DIN EN TH Z PK 110 PK PK 110 SV PK 110 G * Standard accessories M: Mounting plate, sheet steel, galv SIL: Lid with silicone seal TS 15: Top hat rail DIN EN TH Z All dimensions in mm. Please refer to technical data.

7 PK PK 115 SV PK 115 G * PK 115 Standard accessories M: Mounting plate, sheet steel, galv SIL: Lid with silicone seal TS 15: Top hat rail DIN EN TH Z Rose_Industrial Polymas_en_1111.pdf Helsinki tel automation@klinkmann.fi St. Petersburg tel klinkmann@klinkmann.spb.ru Moscow tel moscow@klinkmann.spb.ru Yekaterinburg tel yekaterinburg@klinkmann.spb.ru Samara tel samara@klinkmann.spb.ru Кiev tel klinkmann@klinkmann.kiev.ua Riga tel klinkmann@klinkmann.lv Vilnius tel post@klinkmann.lt Tallinn tel klinkmann.est@klinkmann.ee Мinsk tel minsk@klinkmann.com