Atlantic. ip40-ip65 Metal distribution switchboard. Certifications. Technical features. Electrical properties

Size: px
Start display at page:

Download "Atlantic. ip40-ip65 Metal distribution switchboard. Certifications. Technical features. Electrical properties"

Transcription

1 Atlantic ip40-ip65 Metal distribution switchboard Atlantic series is designed by metal cabinets combinations created for low Voltage electrical switchboards. This line of products show an innovative aesthetic, fulfilling the quality and safety concepts necessary in a tough market. This series has a large range to offer the possiblility of creating tailored distribuition swhitch boards: surface, flush-fit, watertight enclosures; with opaque or transparent doors, with an extensive modular capacity, linking structures its fabrication is made with the highest quality materials and due to its fast and simple assembling offer a full functionality as well as integrate any switchgear model. Certifications According to low Directive norm 2006/95/cE Norms: UnE-En FT-ATLANTIC-01 Technical features - Protection degree: Surface combinable cabinets without door: ip30 Surface combinable cabinets with door: ip40 Surface compact cabinets: ip40 Surface compact cabinets:ip65 Flush-fit cabinets: ip40 - Resistence to impact: Surface combinable cabinets without door: ik07 Surface and flush-fit cabinets with transparent door: ik09 Surface and flush-fit cabinets with opaque door: ik10 - Range of temperature under normal conditions: -25ºC / +40ºC. - Watertight maximum temperature: 80ºC. - Epoxi-polyester maximum temperature: 125ºC. Electrical properties - Rated operational voltage (U e ): 1000 V AC. - Rated insulation voltage (U i ): 1000 V AC. - Rated impulse withstand voltage (U imp ): 12KV (depending on accesorie). - Intensity (I e ): 630 A (surface) / 250 A (flush-fit) (depending on accesorie). - Rated short time withstand (I cw ): 23 KA 1s. - Rated peak withstand current (I pk ): 48 KA.

2 Product range Standard painting cycle --Degrease: Removing residual oils by means of phosphate immersions. --Lighten: Twice, first with tap water and second withy deminneralized water. --Passivization: Mixture of Hcl+nA cl and bath against rust getting in that sense the proper finish ready to be painted. --Dry: with hot air (through 100º C tunnel). --Painted: with tighten epoxi polyester RAL 9003 with thickness μ. Painting system A1.02 according to UnE-En iso norm. --Baking chamber: adhesion by polymerisation 180º baking tunnel during minutes. Standard --Surface combinable cabinets without door ip30. --Surface combinable cabinets with opaque or transparent door ip40. --Surface compact cabinet with opaque or transparent door ip40. --Surface compact cabinet with opaque or transparent door ip65. --Flush-fit cabinets with opaque or transparent door ip40. --Modular capacity for the whole product range: Materials --Case, sides, upper and lower covers for surface cabinets and frames for flush-fit units made with cold rolled steel plate En10130+A1 of 1,2 mm thickness. --Case for flush-fit units made with 1,2 mm thickness galvanised steel. --Opaque door made with cold rolled steel plate En10130+A1; 1 mm thickness for surface cabinets and 1,2 mm thickness for flush-fit cabinets. --Transparent door made with templated security glass of 4 mm thickness in smoked colour. Finishing --Tighten epoxi polyester paint emboss coating RAL 9003, μ. --For combinable cabinets, upper and lower cover with RAl7016 (anthracite grey). --Resistence against corrosion under norm UNE-EN Clasification C4-M under norms ASIM B-117:97; ISO 9227:0 and ISO For higher resistance against corrosion, consult for aditional prime. Destined for creating electrical low voltage distribution switchboards Supply Surface combinable cabinets IP30-IP40 They are supplied dismantled in a sole package which contains case, sides, upper and lower cover, cable entry lid and accessories bag. --Accessories bag: insulated caps for doors reversibility, wall support adjustments, mass continuity clamps, rail fixation rule and mounting instructions. Doors are supplied separatelly, in case of ordering, doors have already fitted two lockers and accessories bag. --Door accessories bag: hinge and locker elements, fixation screws, locking bolt and key. Surface compact cabinets IP40-IP65 & flush-fit cabinets IP40 They are supplied already mounted and in individual packaging which contains cabinet with door, lockers and accessories bag. --Accesories bag: insulated caps for doors reversibility, wall support adjustments (for surface cabinets), rail fixation rule, ket and mounting instructions. Covers and DIN rails. --They can be asked for in kits: Covers + DIN rails. --As an individual way: modular or blind covers and Din rails plus assembling supports for surface cabinets (48013), or flush-fit cabinets (48014). atlantic SERIES PAGE 2

3 SURfAcE combinables cabinets ip30 - ip40 Case --Cabinet totally assembled which is supplied dismounted in order to offer the installator the highest versatility making for easy assembling and wiring. --Case is a plain side which has two profiles where the components can be fitted. This profile has two horizontal lines of 25mm to fit cage nuts used for accessories fixation and a third line with circular 3mm diameter holes allowing to screw directly through the profile. --In the four depth corners and externally oriented there are four thigh-screw riveted for wall mounting support fixation. Sides --Sides assembling is made by clipped-on system. --Sides are reversibles and the contacting area between side and bottom has a flashing shape, guarranting the protection degree against water. Doors --Available opaque or transparent doors. --1mm thickness steel opaque door. --4 mm thickness tempered and security smoked glass with IDE serigraph for transparent door. --To fit them, it is supplied 4 c shape common elements, to fix the hinges and the cabinet lockers. this allows doors to be reversibles. Upper and lower covers --Clipped-on system on mounting of top and bottom framework. --RAl 7016 anthracite grey for covers. --They have a space of 440x106 mm in order to easy the pipe passage or tray installation. This width lenght agree with the rail easing in that sense the wiring distribution internally the cabinet. this hole is covered by the cale-entry lid. --Cable entry lid has a premoulded part with the tray and pipes dimension more used in order to facilitate the cuts. --This lid has a clipped-on system and it can be screwed in order to reinforce its fastening. Continuity mass and boost button --To promise the continuity of masses and protect the cabinet from indirect contacts, it is supplied 4 adjustments which attach the case with covers and sides. --Four fixing pressure plastic clips are supplied, giving in that way a higher stability to the cabinet and getting also the imposibility of dismounting the cabinet with a special tool according to the norm. Lock --Standar locker ¼ turn with 2 points of 5mm. All references has two lockers. --Another kind of locker are supplied as accessories. Possibility of join cabinets getting high magnitude and modular capacity atlantic SERIES PAGE 3

4 SURfAcE compact cabinets ip40 SURfAcE compact cabinet ip65 Case --The case of the cabinet has U shape, formed by a sole piece composed by the bottom and the sides. --Case is a plain side which has two profiles where the components can be fitted. This profile has two horizontal lines of 25 mm to fit cage nuts used for accessories fixation and a third line with circular 3 mm diameter holes allowing to screw directly through the profile. --In the four depth corners and externally oriented there are four thigh-screw riveted for wall mounting support fixation. Upper and lower covers --The assembling of upper and lower covers is made by clipp-on system. --Covers are RAL 9003 the same as the bottom cabinet. --They have a space of 440x106 mm to facilitate the entrance for pipes and installation trays. This width lenght agree with the rail easing in that sense the wiring distribution internally the cabinet. This hole is covered by the cale-entry lid. --Cable entry lid has a premoulded part with the tray and pipes dimension more used in order to facilitate the cuts. --This lid has a clipped-on system and it can be screwed in order to reinforce its fastening. Doors for ip40 and ip65 --Available opaque or transparent doors. --1mm thickness steel opaque door. --4 mm thickness tempered and security smoked glass with IDE serigraph for transparent door. --Doors for IP65 cabinets with waterthigh promising the protection degree. --To fit them, it is supplied 4 c shape common elements, to fix the hinges and the cabinet lockers. This allows doors to be reversibles. Lock for IP40 and IP65 --Standar locker ¼ turn with 2 points of 5 mm. All references has two lockers. --Another kind of locker are supplied as accessories. Case --The cabinet case is formed by a sole piece showing two profiles where all equipment of the set can be attached. --Case is a plain side which has two profiles where the components can be fitted. This profile has two horizontal lines of 25 mm to fit cage nuts used for accessories fixation and a third line with circular 3 mm diameter holes allowing to screw directly through the profile --In the four depth corners and externally oriented there are four thigh-screw riveted for wall mounting support fixation. --In the upper and lower part are place the the cable entries of 500x80 mm. --Those cable entries are covered with metallic lids screwed to the case with sheet metal screws. the cover has watertight to promise the protection degree of ip65. --It is advisable that entrance of pipes and cables are made trough cable glands in order not to loose the protection degree of the cabinet. atlantic SERIES PAGE 4

5 flush-fit cabinets ip40 Case --Made in galvanished steel, totally protected against rust from the wall humidity. It is form by one folding piece with some premouldes entries of 100x50 mm easy to break down for cables and pipes entrance. --For wall fixation there are two flaps which allows a better fixation in the embeded. Possibility of joining flush-fit cabinets getting high magnitude and modular capacity Frame --The frame of the cabinet is used as chassis, and can fit all electrical switchgears over a working table independently the embeded base. --It has two lines with 25 mm rectangular promouldes where all equipment of the set is fitted with cage nuts and screws. --The cabinet sides has wide spaces for wiring, where it can be fitted 40 or 60 mm width pipes. In case of necesity of wiring under the structure of the frame, there is a space between frame and bottom of 30 mm. --Frame totally installed with switchgears it is assembled over the case previously embeded. The premoulds has oval shape, which allows to correct the deviation from the embeded. Doors --Available opaque or transparent doors. --1,2 mm thickness steel opaque door. --4 mm thickness tempered and security smoked glass with IDE serigraph for transparent door. --Doors total plain for boosting the embeded aesthetic. --They are attached to the frame by means of internal hinghes which allows all doors to be reversibles. Lock --Standar locker ¼ turn with 2 points of 5 mm. All references has two lockers. --Another kind of locker are supplied as accessories. atlantic SERIES PAGE 5

6 Lid + Din rail kits (for surface and flush-fit cabinets) DIN rail for surface cabinets --Standars capacity per rail 24 modules. --Fixation system of Omega rail through clip-on supports. --Height adjustment supports one a variation in height of the Omega rail of 45 mm. The support has three pre-marked positions which are suitable for the three standard heights over the electrical switchgears. --The variation of this height can be made in the premounting or once the set is fitted in the cabinet. --In order to fit properly the rails over the case profiles, it is supplied a rule where the position of the holes to be used are marked depending on the number of rails need to be fitted. DIN Rail DIN for flush-fit cabinets --Standard capacity per rail 24 modules. --Rail fitted directly to the case through M6 cage nuts and M6x10 screws. --In order to fit properly the rails over the case profiles, it is supplied a rule where the position of the holes to be used are marked depending on the number of rails need to be fitted. Distance between rail and lid: 50,5 mm Distance between lid and door --Surface cabinets: 45,5 mm --Flush-fit cabinets: 33,5 mm Modular lids Plastic lids: --Hinged, closed by clipp-on system; in order to open the lid, it is neccesary to use a tool according to the norm. Manufactured in ABS colour RAL Modular: 150 and 200 mm height with 24 modules capacity. - Blinds: 50, 150 and 200 mm height. Metalic lids: --Fix, screwed to the cabinet structure through M6 cage nuts and M6x10 anti-rotation screws. --Manufactured in cold steel plate and painted in RAL Modular: 150 and 200 mm height with capacity for 24 modules; 300 and 400 mm height with capacity for 48 (2x24) modules. - Ciegas: 50, 150, 200, 300 and 400 mm heights. Lid and DIN rail kits Capacity modular cabinet lids SUrface flush-fit PLastic METalic COMBINABLE IP40 COMPACT IP40 COMPACT IP65 FLUSH-FIT IP40 surface FLUSH-FIT surface FLUSH-FIT 48 MOD. 40ENL SUP48-72PO-PT 65SUP48-72PO-PT 40EMP48-72PO-PT S48P200 E48P200 S48M200 E48M MOD. 96 MOD. 120 MOD. 40ENL SUP48-72PO-PT 65SUP48-72PO-PT 40EMP48-72PO-PT S72P150 E72P150 S72M150 E72M150 40ENL SUP72-96PO-PT 65SUP72-96PO-PT 40EMP72-96PO-PT S72P200 E72P200 S72M200 E72M200 40ENL SUP72-96PO-PT 65SUP72-96PO-PT 40EMP72-96PO-PT S96P150 E96P150 S96M150 E96M150 40ENL SUP96-120PO-PT 65SUP96-120PO-PT 40EMP96-120PO-PT S96P200 E96P200 S96M200 E96M200 40ENL SUP96-120PO-PT 65SUP96-120PO-PT 40EMP96-120PO-PT S120P150 E120P150 S120M150 E120M150 40ENL SUP PO-PT 65SUP PO-PT 40EMP PO-PT S120P200 E120P200 S120M200 E120M MOD. 40ENL SUP PO-PT 65SUP PO-PT 40EMP PO-PT S168P150 E168P150 S168M150 E168M MOD. 40ENL SUP PO-PT 65SUP PO-PT 40EMP PO-PT S144P200 E144P200 S144M200 E144M MOD. 40ENL SUP PO-PT 65SUP PO-PT 40EMP PO-PT S192P150 E192P150 S192M150 E192M150 CapACITY modular SUPPLIED WITH 48 MOD. 2 modular lids 200 mm + 1 blind lid 50 mm + 2 DIN rails 3 modular lids 150 mm + 3 DIN rails 72 MOD. 3 modular lids 200 mm + 1 blind lid 50 mm + 3 DIN rails 4 modular lids 150 mm + 1 blind lid 50 mm + 4 DIN rails 96 MOD. 4 modular lids 200 mm + 1 blind lid 50 mm + 4 DIN rails 5 modular lids 150 mm + 2 blind lids 50 mm + 5 DIN rails 120 MOD. 5 modular lids 200 mm + 1 blind lid 50 mm + 5 DIN rails 168 MOD. 7 modular lids 150 mm + 7 DIN rails 144 MOD. 6 modular lids 200 mm + 1 blind lid 50 mm + 6 DIN rails 192 MOD. 8 modular lids 150 mm + 1 blind lid 50 mm + 8 DIN rails atlantic SERIES PAGE 6

7 DIN rail kits ReferencE DescripTIOn Din rail 24 modules + assembling support SURFACE Din rail 24 modules + assembling support FLUSH-FIT Hinged plastic lids lid HEiGHt (mm) BLINDS ReferencE MODULAR MODULES 50 TC TC150 TM TC200 TM Fix metalic lids lid HEiGHt (mm) REFERENCE MODULES BLINDS MODULAR 50 TCM50F TCM150F TMM150F TCM200F TMM200F TCM300F TMM300F 2X TCM400F TMM400F 2X24 Numerous module combinations for the same size cabinet Surface combinable cabinet IP30-IP40 REFERENCE REFERENCE DOORS dimensions CABINET USEFUL SPACE CABLE ENTRACE Modular CAPACITY WEIGHT KG MAX. load. Kg. POWER DISSIPATION ACCORDING TO TEMPERATURE INCREASE OF ºc p(w)* (AxBxC) (DxE) (FxG) CABINET DOOR ENL48-72 PO40SUP x510x x x ,03 6, ,00 85,80 107,60 130,40 153,90 PT40SUP x510x x x ,03 4, ,00 85,80 107,60 130,40 153,90 40ENL72-96 PO40SUP x710x x x ,52 7, ,80 109,30 137,10 166,10 196,10 PT40SUP x710x x x ,52 8, ,80 109,30 137,10 166,10 196,10 40ENL PO40SUP x910x x x ,59 9, ,30 137,70 172,70 209,20 247,00 PT40SUP x910x x x ,59 9, ,30 137,70 172,70 209,20 247,00 40ENL PO40SUP x1110x x x ,44 11, ,80 167,30 209,90 254,30 300,20 PT40SUP x1110x x x ,44 11, ,80 167,30 209,90 254,30 300,20 40ENL PO40SUP x1310x x x ,67 12, ,20 170,50 213,90 259,10 305,90 PT40SUP x1310x x x ,67 13, ,20 170,50 213,90 259,10 305,90 Cabinet supplied without doors. Cabinet supplied empties, without lids neither DIN rails atlantic SERIES PAGE 7

8 Surface compact cabinets IP40 REFEREnce dimensions CABINET USEFUL SPACE CABLE ENTRACE modular capacity weight KG MAX. load. Kg. POWER DISSIPATION ACCORDING TO TEMPERATURE INCREASE OF ºc p(w)* (AxBxC) (DxE) (FxG) SUP48-72PO 670x510x x X , ,00 85,80 107,60 130,40 153,90 40SUP48-72PT 670x510x x X , ,00 85,80 107,60 130,40 153,90 40SUP72-96PO 670x710x x X , ,80 109,30 137,10 166,10 196,10 40SUP72-96PT 670x710x x X , ,80 109,30 137,10 166,10 196,10 40SUP96-120PO 670x910x x X , ,30 137,70 172,70 209,20 247,00 40SUP96-120PT 670x910x x X , ,30 137,70 172,70 209,20 247,00 40SUP PO 670x1110x x X , ,80 167,30 209,90 254,30 300,20 40SUP PT 670x1110x x X , ,80 167,30 209,90 254,30 300,20 40SUP PO 670x1310x x X , ,20 170,50 213,90 259,10 305,90 40SUP PT 670x1310x x X , ,20 170,50 213,90 259,10 305,90 Cabinets supplied empties, without lids neither DIN rail. Surface compact cabinets IP65 REFEREnce dimensions CABINET USEFUL SPACE CABLE ENTRACE modular capacity weight KG MAX. load. Kg. POWER DISSIPATION ACCORDING TO TEMPERATURE INCREASE OF ºc p(w)* (AxBxC) (DxE) (FxG) SUP48-72PO 670x510x x X , ,00 85,80 107,60 130,40 153,90 65SUP48-72PT 670x510x x X , ,00 85,80 107,60 130,40 153,90 65SUP72-96PO 670x710x x X , ,80 109,30 137,10 166,10 196,10 65SUP72-96PT 670x710x x X , ,80 109,30 137,10 166,10 196,10 65SUP96-120PO 670x910x x X , ,30 137,70 172,70 209,20 247,00 65SUP96-120PT 670x910x x X , ,30 137,70 172,70 209,20 247,00 65SUP PO 670x1110x x X , ,80 167,30 209,90 254,30 300,20 65SUP PT 670x1110x x X , ,80 167,30 209,90 254,30 300,20 65SUP PO 670x1310x x X , ,20 170,50 213,90 259,10 305,90 65SUP PT 670x1310x x X , ,20 170,50 213,90 259,10 305,90 Cabinets supplied empties, without lids neither DIN rail. Flush-fit cabinets ip40 REFEREnce dimensions CABINET USEFUL SPACE CAse to embed modular capacity weight KG MAX. load. Kg. POWER DISSIPATION ACCORDING TO TEMPERATURE INCREASE OF ºc p(w)* (AxBxC) (DxE) (FxGxH) EMP48-72PO 737x597x x x520x , ,80 57,90 72,60 87,90 103,80 40EMP48-72PT 737x597x x x520x , ,80 57,90 72,60 87,90 103,80 40EMP72-96PO 737x797x x x720x , ,70 73,60 92,30 111,80 132,00 40EMP72-96PT 737x797x x x720x , ,70 73,60 92,30 111,80 132,00 40EMP96-120PO 737x997x x x920x , ,40 89,00 111,60 135,20 159,60 40EMP96-120PT 737x997x x x920x , ,40 89,00 111,60 135,20 159,60 40EMP PO 737x1197x x x1120x , ,90 104,10 130,60 158,20 186,80 40EMP PT 737x1197x x x1120x , ,90 104,10 130,60 158,20 186,80 40EMP PO 737x1397x x x1320x , ,20 119,10 149,40 180,90 213,60 40EMP PT 737x1397x x x1320x , ,20 119,10 149,40 180,90 213,60 Cabinets supplied empties, without lids neither DIN rail. * Calculation obtained according to Norm CEI890: mistake corrections 1998; Method to determine by extrapolation of low tension derivated from serie (PTTA). atlantic SERIES PAGE 8

9 armarios surface de combinable superficie enlazable cabinets ip40 SURfAcE compact cabinets ip40 SURfAcE compact cabinets ip40 SURfAcE compact cabinets ip65 Dimensions Surface cabinets: Combinables IP40, Compacts IP40, Compacts IP65 SEctiOn DEtAil (z) flush-fit. SEctiOn DEtAil (z) SURfAcE ip40. SEctiOn DEtAil (z) SURfAcE ip65. atlantic SERIES PAGE 9

10 armarios de superficie enlazable ip40 flush - fit cabinets ip40 Dimensions Flush-fit cabinets IP40 detail A-A premoulded cable EntRiES in All SiDES Head Office. Polígono Industrial Villanueva de Gállego. Sector 2, Parcela H Villanueva de Gállego - Zaragoza (Spain) Phone: ide@ide.es.

DRIVIA cabinets LIMOGES Cedex France 1. DESCRIPTION, USE 3. DIMENSIONS 2. RANGE, CAT. NO. EQUIVALENCE TABLE

DRIVIA cabinets LIMOGES Cedex France 1. DESCRIPTION, USE 3. DIMENSIONS 2. RANGE, CAT. NO. EQUIVALENCE TABLE 87045 LIMOGES Cedex France Tel: (+33) 05 55 06 87 87 Fax: (+33) 05 55 06 88 88 DRIVIA cabinets CONTENTS NTS PAGES 1. Description, use....1 2. Range, equivalence table...1 3. Dimensions...1 4. General characteristics...2

More information

5/2 Introduction. Unequipped Distribution Boards 5/4 Modular distribution boards 5/5 Add-on parts

5/2 Introduction. Unequipped Distribution Boards 5/4 Modular distribution boards 5/5 Add-on parts ALPHA AS Modular Distribution Boards /2 Introduction Unequipped Distribution Boards /4 Modular distribution boards / Add-on parts Assembly Kits for Unequipped Distribution Boards /6 8GK4 assembly kits

More information

ALPHA DIN Wall-Mounted. Distribution Boards

ALPHA DIN Wall-Mounted. Distribution Boards Siemens AG 008 ALPHA 160 - DIN Wall-Mounted Distribution Boards / Introduction Distribution Boards with Built-In Distribution Board Panels /4 8GK1 surface and flush-mounting with quick-assembly kits Unequipped

More information

OptiLine 45 Floor boxes

OptiLine 45 Floor boxes OptiLine 45 Floor outlet boxes P89490 Type Colour Dimensions A/B/C (mm) Qty per pack Ref. No. Floor outlet box including mounting frames for Altira, trim frame with four quick-fix devices and lid with

More information

Euromas Polymas. Colour: Silver grey, similar to RAL 7001; special colours on request

Euromas Polymas. Colour: Silver grey, similar to RAL 7001; special colours on request Euromas Polymas Detailed product information can be found on www.bopla.de - 5 sizes - Versions with or without screwing systems - Quick-release fastener versions - Transparent lids on request - Terminals

More information

2/2 Introduction. Unequipped Distribution Boards 2/5 8GK1 surface and flush-mounting distribution boards

2/2 Introduction. Unequipped Distribution Boards 2/5 8GK1 surface and flush-mounting distribution boards Siemens AG 010 ALPHA 160 - DIN Wall-Mounted Distribution Boards / Introduction Distribution Boards with Built-In Distribution Board Panels /4 8GK1 surface and flush-mounting with quickassembly kits Unequipped

More information

4/2 Introduction. Marshaling Boxes 4/8 8GK1 surface-mounting distribution boards

4/2 Introduction. Marshaling Boxes 4/8 8GK1 surface-mounting distribution boards ALPHA 630 - DIN Floor- Mounted Distribution Boards /2 Introduction Unequipped Distribution Boards /5 8GK1 surface-mounting distribution boards, IP3 /6 8GK1 surface-mounting distribution boards, IP55 Marshaling

More information

Empty enclosures AKL / AKi ITC - AKL / AKi Enclosures

Empty enclosures AKL / AKi ITC - AKL / AKi Enclosures 4 basic enclosures up to 600 x 300 mm, with two different cover heights Box: choice of polystyrene (AKL) or glassfibre-reinforced polycarbonate, grey, similar to RAL 7035 Cover: grey (polystyrene or polycarbonate)

More information

Factory Assistance: Phone: Fax: Page 1

Factory Assistance: Phone: Fax: Page 1 CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)

More information

THIS PAGE INTENTIONALLY LEFT BLANK

THIS PAGE INTENTIONALLY LEFT BLANK THIS PAGE INTENTIONALLY LEFT BLANK Seamed Edge Doors 1000 Series 16 and 18 Gauge Doors Cold Rolled or Galvanized Steel Tight Corner Seam Full Body Polystyrene Core or Honeycomb Core Non-Handed Design 12-Gauge

More information

19-in. Mini-Rack Cabinet, Type 1

19-in. Mini-Rack Cabinet, Type 1 Spec-00466 19-in. DP FX (763) Mini-Rack 422-2588 422-2661 Cabinet, Components and Accessories Free-Stand Networking Cabinets 19-in. Mini-Rack Cabinet, Type 1 Industry Standards NEMA Type 1 EIA 310-D /

More information

Raised Floor system LIMOGES Cedex. Phone : Fax :

Raised Floor system LIMOGES Cedex. Phone : Fax : 87045 LIMOGES Cedex Phone : 05 55 06 87 87 Fax : 05 55 06 88 88 Raised Floor system CONTENTS PAGES 1.Range 1 to 3 2.Installation process 4 to 10 3.Products détails 11 to 22 4.Technical characteristics

More information

salto safe 4028 A12 Turn-tilt windows

salto safe 4028 A12 Turn-tilt windows A12 Turn-tilt windows salto safe 4028 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. 32 9 388 88 81 - F. 32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com salto safe 4028 Contents 1. General

More information

Standard Product. Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories

Standard Product. Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories Spec-00466 F763.422.2661 763.422.2588 Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories 19-in. Mini-Rack

More information

FRP GATES MM08 FRP GATES Rev. 3 COMPOSITE SOLUTION PAGE 1

FRP GATES MM08 FRP GATES Rev. 3 COMPOSITE SOLUTION PAGE 1 FRP GATES MM08 08.02.2016 Rev. 3 FRP GATES COMPOSITE SOLUTION PAGE 1 SUMMARY 1. USES AND CHARACTERISTICS... 3 2. EMPLOYMENT FIELDS... 4 3. MATERIALS... 5 3.1 TABLE OF PROFILES AND STRUCTURAL ACCESSORIES...

More information

NEWS Part. N /0 MINITEC NEWS

NEWS Part. N /0 MINITEC NEWS NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6

More information

Football Goals 7,32x2,44 m

Football Goals 7,32x2,44 m Football Goals 7,32x2,44 m 120x100 mm Professional aluminum football goals 7,32x2,44 m Made of special oval aluminum profile 120x100 mm with double reinforcing ribs. The main frame of the goal powder coated

More information

General Mounting/Installation manual 2019

General Mounting/Installation manual 2019 General Mounting/Installation manual 209 Important, before you start! Read this manual thoroughly! Think about this before you start to mount. Note that this is a general mounting instruction! Pre-assemble

More information

Standard program overview Steel smoke-proof doors

Standard program overview Steel smoke-proof doors Smoke-proof doors Standard program overview Steel smoke-proof doors Pos. Product 1 RS-1 Steel door (thin rebated) Smoke-proof door in accordance EN 1634-3 / DIN 18095 Dimensions W 625-1350 H 1750-2500

More information

Door Hinges Drill-in Hinges

Door Hinges Drill-in Hinges Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2

More information

Hardware Fitting Accessories Door Seals

Hardware Fitting Accessories Door Seals Areas of application Protection against cold, draught and vermin Reduces light leakage, sound insulation Smoke control, fire resistance Reduces the energy consumption of air conditioning systems (see following

More information

Re-Grab Safety Gate. These industrial safety gates come pre-assembled and are easily installed.

Re-Grab Safety Gate. These industrial safety gates come pre-assembled and are easily installed. Manufactured from durable and corrosive resistant polyurethane, the RE-GRAB Safety Gate will not corrode or degrade even in aggressive chemical environments. They are self-extinguishing to UL94 and are

More information

industrial fitting THE CABINET THAT CHANGES CABINETS

industrial fitting THE CABINET THAT CHANGES CABINETS industrial fitting THE CABINET THAT CHANGES CABINETS VALID UNTIL 31/08/2016 CO Available in five colours: GREEN stacking containers and storage containers Recycled plastic, clean energy. From materials

More information

aluminium profile system

aluminium profile system aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction

More information

IFRC SHELTER TOOL KIT

IFRC SHELTER TOOL KIT IFRC SHELTER TOOL KIT PP ROPE ROPE, polypropylene, black, 12mm diam., twisted Diameter: 12mm +/- 0.5mm Length: 30m Weight: 1.9kg Number of strand: 3 minimum Type: twisted Material: polypropylene, no recycled

More information

1.) Type: VL-F Single compartment rectangular smoke extraction ducts and fittings

1.) Type: VL-F Single compartment rectangular smoke extraction ducts and fittings 1.) Type: VL-F Single compartment rectangular smoke extraction ducts and fittings 2.) Manufacturer / Place of manufacture: AEROPRODUKT Zrt., 6640 Csongrád, Szegedi út 1., HUNGARY 3.) Function: The smoke

More information

Flush Floor system LIMOGES Cedex. Phone : Fax :

Flush Floor system LIMOGES Cedex. Phone : Fax : 87045 LIMOGES Cedex Phone : 05 55 06 87 87 Fax : 05 55 06 88 88 CONTENTS PAGES 1.Range 1 to 3 2.Installation process 4 to 8 3.Products détails 9 to 18 4.Technical characteristics 19 to 21 1 RANGE. Lid

More information

Customer Premise. Solutions for. Solutions for Customer Premise include products ranging from wall distribution to system distribution boxes.

Customer Premise. Solutions for. Solutions for Customer Premise include products ranging from wall distribution to system distribution boxes. Solutions for Customer Premise Solutions for Customer Premise include products ranging from wall distribution to system distribution boxes. The product range of distribution boxes offers small distribution

More information

MODUL-iT ABS modules 60x40

MODUL-iT ABS modules 60x40 MODUL-iT ABS modules 60x40 MODUL-iT ISO modules and accessories make things talk to each other The modules are the heart of the MODUL-iT system. All modules have 60x40 cm outer dimensions. They are interchangeable

More information

Fig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7

Fig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7 FSW Installation instructions Track rail 75 x 72 mm 1. Ceiling substructure and installation of the track rail (Fig. 1): The track rail must be bolted over its entire length (including the stacking track

More information

GENERAL CATALOGUE. Connectivity for workplaces

GENERAL CATALOGUE. Connectivity for workplaces GENERAL CATALOGUE Connectivity for workplaces CONTENTS GENERAL 2 General Catalogue Connectivity for workplaces WORKPLACE SOLUTIONS SIMON 500 CIMA SIMON K45 SIMON TRUNKING p. 4 p. 86 p. 150 SIMON ELECTRICAL

More information

Section five. Connection systems. Isobar 4 Evo MCB pan assemblies Mulitclip busbar and Polybloc 126. Comb busbars 127

Section five. Connection systems. Isobar 4 Evo MCB pan assemblies Mulitclip busbar and Polybloc 126. Comb busbars 127 Connection systems Section five Isobar 4 Evo MCB pan assemblies 122 1 Mulitclip busbar and Polybloc 126 Comb busbars 127 Terminals and installation accessories 128 129 121 Isobar 4 Evo MCB pan assemblies

More information

M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information

M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4

More information

Safety switches with slotted hole lever

Safety switches with slotted hole lever Safety switches with slotted hole lever Selection diagram C1 C C C4 C5 Straight slotted hole lever Slotted hole lever at the left Slotted hole lever at the right (without bend) Slotted hole lever at the

More information

Polymas Industrial Watertight Enclosure

Polymas Industrial Watertight Enclosure Polymas Industrial Watertight Enclosure Last Update April 2011 Euromas-Polymas These small control enclosures made of 30% glassbead-reinforced polyamide are especially suitable for fitting small electronics

More information

SPECIFICATION GUIDE. ABB Power Technology, S.A. Zaragoza, SPAIN. ABB Power Technologies Distribution Transformers

SPECIFICATION GUIDE. ABB Power Technology, S.A. Zaragoza, SPAIN. ABB Power Technologies Distribution Transformers SPECIFICATION GUIDE ABB VACUUM CAST COIL DRY TRANFORMERS CONTENTS 1. General 1.1. Codes and standards 1.2. Service conditions 1.3. System characteristics 1.4. Documentation 2. Design and construction 2.1.

More information

TEMPORARY FENCES. Product catalogue

TEMPORARY FENCES. Product catalogue TEMPORARY FENCES Product catalogue WWW.SALVADA.EU OUR PRODUCTS 3 TEMPORARY FENCES 4 OPENWORK GATES AND PEDESTRIAN GATES 8 HOARDING PANELS 10 BARRIERS 12 CONNECTORS 12 FOOTINGS 12 ACCESSORIES 16 TECHNICAL

More information

RACK 19 AND NETWORKING SOLUTIONS FEATURES

RACK 19 AND NETWORKING SOLUTIONS FEATURES RACK 19 AND NETWORKING SOLUTIONS FEATURES In full respect of the sustainability and compatibility philosophy, the system of suite cabinets E NUX can be integrated with a range of specific accessories for

More information

brühl safety fence systems safety fence systems BRÜHL Safety fence systems

brühl safety fence systems safety fence systems BRÜHL Safety fence systems brühl safety fence systems 23 safety fence systems BRÜHL Safety fence systems 24 brühl safety fence systems The optimal safety fence system for every application Twenty-five years of experience and progress

More information

MAST ARMS & POLES. Ornamental Pole Top & Bases

MAST ARMS & POLES. Ornamental Pole Top & Bases Ornamental Pole Top & Bases Pelco s decorative pole top and bases make the traffic signal aesthetically pleasing to the eye. In addition to the standar 4-piece, Pelco also manufactures the bases with an

More information

Accessories ACCESSORIES DEFENDER ACCESSORIES_ P. 66 CAPS_ P. 64 POSTS P. 58. ASSEMBLY SYSTEMS_ P. 61 Fixing Systems RECINTHA ACCESSORIES_ P.

Accessories ACCESSORIES DEFENDER ACCESSORIES_ P. 66 CAPS_ P. 64 POSTS P. 58. ASSEMBLY SYSTEMS_ P. 61 Fixing Systems RECINTHA ACCESSORIES_ P. Accessories ACCESSORIES link: www.nuovadefim.com/en/content/download-area POSTS P. 58 ASSEMBLY SYSTEMS_ P. 61 Fixing Systems Accessories Screws CAPS_ P. 64 RECINTHA ACCESSORIES_ P. 65 DEFENDER ACCESSORIES_

More information

SPECIAL EXTRUSIONS AND ACCESSORIES

SPECIAL EXTRUSIONS AND ACCESSORIES PROFILE SYSTEM SPECIAL EXTRUSIONS s no i s u r t xe l a i c eps Import Belgium & Luxembourg Profilex s.a. 4A, Z.I. In den Allern L-9911 Troisvierges Tel: 00352/99 89 06 Fax: 00352/26 95 73 73 www.profilex-systems.com

More information

K15.12 ROLLENBAND K15 DOORS

K15.12 ROLLENBAND K15 DOORS K15 DOORS 01.04.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics....03 2. Application range....03

More information

N2 Specs NORA N2 TECHNICAL SPECS N2 is a system of desks and panel units providing both electrification and functional solutions with accessories. SYSTEM N2 system consists of metal profile frames connected

More information

Post & Rail. Includes: Crossbuck, 2-Rail, 3-Rail and 4-Rail POST SUPPORT OPTIONS

Post & Rail. Includes: Crossbuck, 2-Rail, 3-Rail and 4-Rail POST SUPPORT OPTIONS Post & Rail Includes: Crossbuck, 2-Rail, 3-Rail and 4-Rail STAGGER RAIL ENDS FOR GREATER STRENGTH ALLOW 1-1/2" GAP ON HINGE SIDE OF GATE AND 1-1/4" ON LATCH SIDE OF GATE HARDWARE DIG HOLES 30" MINIMUM

More information

Size : Connection Ends : Min Temperature : Max Temperature : Materials : Cast iron body

Size : Connection Ends : Min Temperature : Max Temperature : Materials : Cast iron body Size : Connection Ends : Min Temperature : Max Temperature : DN 50 to 200 Flanged ISO PN 10/16 ( ISO PN16 for DN200 ) 0 C + 50 C Max Pressure : 16 Bars Specifications : Tangential type Dry dial Magnetic

More information

Barofor Round System (polyester coated) Panels, Posts, Accessories

Barofor Round System (polyester coated) Panels, Posts, Accessories 1 Scope This Technical Data Sheet specifies the requirements for the Barofor Round System. The complete system exists of: Panels Posts Accessories such as fixation system and posts caps. Panels and posts

More information

SELF-TAPPING SCREW FIXINGS

SELF-TAPPING SCREW FIXINGS Denomination: Reference: FT ROS-en Date: 15/12/15 Revision: 3 Page: 1 of 14 T81 AUE T82 TCP T83 TFI CHARACTERISTICS ISO 1478 self-tapping thread. Require pre-drilling. Point Type F. Wide variety of head

More information

TECHNICAL REPORT RAW MATERIALS SINGLE METAL SHEET SECTIONAL DOOR

TECHNICAL REPORT RAW MATERIALS SINGLE METAL SHEET SECTIONAL DOOR TECHNICAL REPORT RAW MATERIALS SINGLE METAL SHEET SECTIONAL DOOR Residencial RESIDENTIAL PRN-23 H + 500 80 A 80 H 220 190 250 80 160 160 Inclinación máxima de las guías superiores Gº Maximum inclination

More information

Contents. Technical Metal Industrial Co. L.L.C.

Contents. Technical Metal Industrial Co. L.L.C. We, at Technical Metal Industrial Co. L.L.C. take pride in declaring the company s commitment to satisfy our customers by providing high quality products and promptly delivering them as per the agreed

More information

INDEX SUPER4-5-6 CALCULATION ASSUMPTIONS... 4 SUPER4-5-6 FRAMES... 7

INDEX SUPER4-5-6 CALCULATION ASSUMPTIONS... 4 SUPER4-5-6 FRAMES... 7 EDITION 02 12 July 1999 REVISION 01 06 August 1999 viale dell' industria 2-38068 rovereto (trento) - telefono: + +39 0464 303030 - fax: ++39 0464 303031 e-mail: info@metalsistem.com - internet: www.metalsistem.com

More information

Adjustable Feet Castors Accessories for Floor Elements

Adjustable Feet Castors Accessories for Floor Elements Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible

More information

Panels, Panel Mounting & Other Accessories

Panels, Panel Mounting & Other Accessories Panels, Panel Mounting & Other Accessories Wire mesh guarding on assembly conveyor line Machine safety enclosure using Lexan panels 108 Multiblock Al 1-105 1-3 Various fastening options for panels on Multiblock

More information

77 cm. 5243/3-GA (3 pcs.) 5243/3-BO (3 pcs.)

77 cm. 5243/3-GA (3 pcs.) 5243/3-BO (3 pcs.) ARCHIMEDE ST.102-4ENG SPECIFICATION Range: ARCHIMEDE Design: Caimi Lab 5203-GA, 5203-BO, 5213-GA, 5213-BO, 5223-GA, 5223-BO, 5233/3-GA, 5233/3-BO, 5241/3-GA, 5241/3-BO, 5243/3-GA, 5243/3-BO, 5245/3-GA,

More information

K15.13 FACE FIXED DOOR HINGES K15 DOORS

K15.13 FACE FIXED DOOR HINGES K15 DOORS K15 DOORS K15.13 01.02.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General... K15.13.03 2. 2-part hinge...

More information

Components made of special materials. Floor Elements for Profile St Profile KH. Fastening Elements for Profile KH

Components made of special materials. Floor Elements for Profile St Profile KH. Fastening Elements for Profile KH Profile Fastening Elements for Profile Floor Elements for Profile Profile KH Fastening Elements for Profile KH Components made of special materials Products in this section Profile 8 x eel profile that

More information

Size : Connection End : Min Temperature : Max Temperature : Materials : Cast iron body

Size : Connection End : Min Temperature : Max Temperature : Materials : Cast iron body Size : Connection End : Min Temperature : Max Temperature : DN 50 to 200 Flanged R.F. PN10/16 0 C ( for cold water type ) + 90 C (for hot water type ) Max Pressure : 16 Bars Specifications : Horizontal

More information

Garage Doors MADE BY RYTERNA

Garage Doors MADE BY RYTERNA Garage Doors MADE BY RYTERNA 2 Content TL&R40 RIB 10 TL&R40 MIDRIB 12 TL&R40 FLUSH 14 TL&R40 CASSETTE 16 TL&R40 SLICK 18 TL&R40 SLICK PLUS 20 TL&R40 MICRORIB 22 TL&R40 MACRORIB 24 TL&R40 TOPRIB 26 TL&R40

More information

MANUFACTURING GUIDELINES FOR PLC (LEVEL-1 AUTOMATION)

MANUFACTURING GUIDELINES FOR PLC (LEVEL-1 AUTOMATION) GENERAL MANUFACTURING GUIDELINES FOR PLC (LEVEL-1 AUTOMATION) SUBMITTED BY SASHIKUMAR G BHARAT HEAVY ELECTRICALS LIMITED INDUSTRIAL SYSTEMS GROUP Prof. C. N. R. Rao Circle I. I. Sc. POST Malleswaram Bangalore

More information

SRS IT cabinets. Installation height numbering as a standard

SRS IT cabinets. Installation height numbering as a standard Among the core products of BKT ELEKTRONIK are metal IT cabinets and casings and related metal accessories. Cabinets are intended for passive and active network equipment with standard dimensions of 10",

More information

Swivel Sector Radial Penstock

Swivel Sector Radial Penstock Swivel Sector Radial Penstock 24/03/2015 - TAINTOR type radial penstock. - Mechanically welded stopboard with sectoral shape, fitted with side wheels to guarantee correct guiding of the penstock throughout

More information

ATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing.

ATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing. F U R N I T U R E F I T T I N G S M A N U F A C T U R E R Twin-walled seel drawer. Complete Range of concealed runners up to 50 Kilos resistance. indamatic self closing and soft closing. Double wall 405

More information

MULTIBLOC 00.ST8 Size A, 690VAC Bottom Fitting, 1-,2-,4-pole

MULTIBLOC 00.ST8 Size A, 690VAC Bottom Fitting, 1-,2-,4-pole MULTIBLOC 00.ST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC series 00.ST8 comprises NH fuse switch disconnectors for 160A. They are designed for bottom

More information

SLIDING SYSTEMS. Product catalog 2017

SLIDING SYSTEMS. Product catalog 2017 SLIDING SYSTEMS Product catalog 2017 Grafipro Oy Product catalog 2017 Table of contents: 3 Areas of use 4 C rails C-30 is a company specialising in aluminium and plastic composite materials. Our expertise

More information

PORTABLE UNITS BASKETBALL SCHELDE SUPER SAM MULTI-ADJUST

PORTABLE UNITS BASKETBALL SCHELDE SUPER SAM MULTI-ADJUST PORTABLE UNITS SCHELDE SUPER SAM MULTI-ADJUST Highest class unit with regulated projection (within range of 245-325 cm) equipped with SAM (Spring Assisted Mechanism) - unique solution which avails to set

More information

COFFEE LABORATORY WHITE STONE VA TEL

COFFEE LABORATORY WHITE STONE VA TEL 1. Technical specifications 4. Operating instructions: Octagon 200 Copyright 2015 by Endecotts Ltd. 21 1. Setting up Technical specifications SIEVE SHAKER MODEL: Octagon 200 General Information The sieve

More information

Heavy duty profiles. Heavy loads with maximum stability. Profile general overview... p Heavy duty profiles... S Load data... p.

Heavy duty profiles. Heavy loads with maximum stability. Profile general overview... p Heavy duty profiles... S Load data... p. Heavy loads with maximum stability Profile general overview... p. 366 Heavy duty profiles... S. 368 Load data... p. 372 Connection techniques... p. 374 Accessories... p. 384 Heavy duty profiles 365 Heavy

More information

Copyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax

Copyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM3010A RM315-R2 RM323-R2 RM329 RM451 RM457 RM3020A RM316 RM324-R2

More information

Cablelink Plus Flush Technical

Cablelink Plus Flush Technical Cablelink Plus Flush Technical 107 technical hotline +44 (0)1268 563720 screeded floor systems is designed to provide power and data distribution highways in screeded floors. The robust system offers a

More information

Wrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1

Wrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1 F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help

More information

Accessories for cable trunking

Accessories for cable trunking At your disposal, a whole range of accessories that allow you to: fasten the trunking temporarily or permanently, keep cables secure in the trunking before fixing the lid, identify your trunking, cut trunking

More information

Installation Instructions Student 101 Fume Cupboard

Installation Instructions Student 101 Fume Cupboard Installation Instructions Student 101 Fume Cupboard Refer drawing on next page 0. If your fume cupboard is supplied with a flatpack bench frame, see step1. If your fume cupboard will be mounted on an existing

More information

Section 4 Panels & Doors

Section 4 Panels & Doors Contents Section 4 101-10 Rolling Door Profile 110 Wire Mesh 101 Sliding Door Profiles 111 Sliding Door Set 114 Sliding Door Guide 115 Panel Mounting Blocks 103-106 Bifold Door Glide 11-113 Mesh Retainers

More information

Cast resin transformers HARMONY TM

Cast resin transformers HARMONY TM Cast resin transformers HARMONY TM HARMONY TM the optimum solution for higher performance At a time when we are all seeking to preserve our way of life, the production of equipment whilst ensuring safety

More information

INSTRUCTIONS FOR USE AND GUARANTEE

INSTRUCTIONS FOR USE AND GUARANTEE INSTRUCTIONS FOR USE AND GUARANTEE The products contained in this technical manual are manufactured (see Technical Manual); according to the manufacturer s technical specifications. - Inadequate storing

More information

Available in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life.

Available in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life. Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional

More information

Kentaur Turnstiles Full-height gates

Kentaur Turnstiles Full-height gates Kentaur Turnstiles Full-height gates Secure Kentaur Turnstiles Versatile Durable Modular The robust Kentaur turnstiles and full-height gates are especially suitable for securing the perimeter of buildings

More information

Components Catalog. Mounting Systems. Version 18.01, updated: 05/25/2018

Components Catalog. Mounting Systems. Version 18.01, updated: 05/25/2018 Components Catalog Mounting Systems Version 18.01, updated: 05/25/2018 1 Index IBC TopFix 200 Components... 5 Roof Tiles... 6 Roof Hook Alu-Vario S+... 6 Roof Hook Alu-Mammut S+... 6 Roof Hook Alu-Mammut

More information

Cable trays Assembling instruction

Cable trays Assembling instruction Cable trays serve the bridging of medium-size fitting distances. The support structures must be planned by engineering experts and observing the permissible torque of all screw connections. 1 Floor connector

More information

ASSEMBLY AND ADJUSTMENT

ASSEMBLY AND ADJUSTMENT EDGE MONITOR ARM EDGE Rev A 2/17 Model EDGE-SLV Model EDGE-BLK Model EDGE-WHT ASSEMBLY AND ADJUSTMENT EDGE MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and

More information

RASCH / SAFIX. Release Numbering at RASCH / SAFIX. Structure of families with additional functions. Summary of the forms

RASCH / SAFIX. Release Numbering at RASCH / SAFIX. Structure of families with additional functions. Summary of the forms RASCH / SAFIX Release 2008 Automatic Search System of Fastenings RECHNERUNTERSTÜTZTES AUSWAHLSYSTEM FÜR SCHNELLEFESTIGER SYSTÈME AUTOMATIQUE DE RECHERCHE DE FIXATIONS Numbering at RASCH / SAFIX Structure

More information

Installation for Full Size Polaris Ranger Crew Doors

Installation for Full Size Polaris Ranger Crew Doors Installation for Full Size Polaris Ranger Crew Doors Order of Installation: Heater Doors Wiper on to Windshield Windshield Top & Back Panel Note: Most of the steps in these instructions need to be repeated

More information

MATERIAL COMBINATION NUMBER 2: Corrosive environment requiring harder, wear-resistant seating faces and resistance to dezincification.

MATERIAL COMBINATION NUMBER 2: Corrosive environment requiring harder, wear-resistant seating faces and resistance to dezincification. Cast Iron Slide Gates Spec Sheet General The contractor shall furnish and install the following cast iron slide gate assemblies as listed on the Gate Schedule and detailed on the manufacturer s drawings.

More information

COLIBRITM. Ceiling. Square ceiling diffuser with discs for supply air. Quick guide

COLIBRITM. Ceiling. Square ceiling diffuser with discs for supply air. Quick guide COLIBRITM Ceiling Square ceiling diffuser with discs for supply air Quick facts Adjustable discs flexible spread pattern Can be used for vertical air diffusion Swirl function Also available in the exhaust

More information

Junction boxes. Surface mounting - IP44 - IP55 - IP56 TECHNICAL CHARACTERISTICS

Junction boxes. Surface mounting - IP44 - IP55 - IP56 TECHNICAL CHARACTERISTICS Junction boxes Surface mounting - IP44 - - IP56 TECHNICAL CHARACTERISTICS Technical specifications 3 models with cable outlets and snap fixed cover (IP44 according to Standards EN 60529) 7 models with

More information

POOL ENCLOSURES LEIA & ALVA. Assembly manual

POOL ENCLOSURES LEIA & ALVA. Assembly manual POOL ENCLOSURES LEIA & ALVA Assembly manual Rev. 07.2017 PARTS LIST Parts for rail installation: Rail Síncsavar screw 1 Plastic Síncsavar anchor 10 50 2 Rail Síncsavar connector 3 Arrest Síncsavar wedge

More information

Accessories and workbenches

Accessories and workbenches Workbenches To complete the Elabo furnishing systems, we also provide workbenches and organisable steel plate base cabinets. Steel cabinets, shelves and shelf trolleys are available for storage of materials

More information

DISPLAY UNITS (HEATED/CHILLED)

DISPLAY UNITS (HEATED/CHILLED) METALCARRELLI 4 DISPLAY UNITS (HEATED/CHILLED) presentation Having always been present in the HO.RE.CA. sector, we have over time managed to develop a range of products for displaying both heated and chilled

More information

Railway. Smart solutions for the railway sector

Railway. Smart solutions for the railway sector Railway Smart solutions for the railway sector 1 «Fastening solutions for railway applications from A to Z. Bossard is your one-stop shop.» 2 SMART SOLUTIONS FOR THE RAILWAY SECTOR Better connected We

More information

Fastening material. Lindab 1. General information and theory 2. Safe 3. Silencers 4. Dampers & Measure units 5. Fire dampers & Smoke evacuation

Fastening material. Lindab 1. General information and theory 2. Safe 3. Silencers 4. Dampers & Measure units 5. Fire dampers & Smoke evacuation Fastening material Lindab General information and theory Safe Silencers Dampers & Measure units Fire dampers & Smoke evacuation Air valves Roof hoods Other circular products Transfer 0 Rectangular Flexible

More information

APPENDIX FENCE GENERAL NOTES

APPENDIX FENCE GENERAL NOTES APPENDIX FENCE GENERAL NOTES 1. Fabric: 9 gage, 2" mesh, knuckle top and bottom, placed on the outside of posts, single fabric width for the entire height. 2. All fencing to be standard galvanized finish.

More information

BSC Industrial Storage Cabinet

BSC Industrial Storage Cabinet BSC-900 - Industrial Storage Cabinet 900 x 450 x 900mm 150kg Shelf Load Capacity Ex GST Inc GST $320.00 $368.00 ORDER CODE: MODEL: Shelf Load Capacity (kg): Drawer Load Capacity (kg): Dimensions (L x W

More information

RX 3 ->CATALOG PAGES INSIDE. the global specialist

RX 3 ->CATALOG PAGES INSIDE. the global specialist RX 3 ESSENTIAL PROTECTION ->CATALOG PAGES INSIDE the global specialist IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES NEW RX 3 RANGE essential The new RX 3 range of RCDs and MCBs provides a response

More information

ABOUT US. Our Mission. Our Vision. Providing safety living areas to the end users who would like to be in safe environment.

ABOUT US. Our Mission. Our Vision. Providing safety living areas to the end users who would like to be in safe environment. ABOUT US Our Company, Dogan Mesh Wire, was founded in 1968 and we are proud to share our 45 years of experience and knowledge with our customers. Since the year of the foundation; our company gives importance

More information

Roller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides

Roller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides Roller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides Application example linear systems, drives and accessories 1 2 3

More information

Fillings and Colours. Standard Colours. It is possible to paint the elements with other colours included in the RAL palette.

Fillings and Colours. Standard Colours. It is possible to paint the elements with other colours included in the RAL palette. If you are thinking of quality in stable s equipment, the first thing that should come to your mind is the Remtor brand. For many years, we have been providing equipment of highest quality to our customers.

More information

Installation of HORIZONT and HORIZONT HIGH pool enclosures

Installation of HORIZONT and HORIZONT HIGH pool enclosures Installation of HORIZONT and HORIZONT HIGH pool enclosures Rev. 19.10.2017 PARTS LIST Parts for rail installation: Rail screw 6 x 60 Plastic anchor 10 x 50 Rail connector Arrest wedge [R-L] Pop rivet 4

More information

Carousels - Overlapping Slat

Carousels - Overlapping Slat Carousels - Overlapping Slat Introduction The overlapping slat carousel is designed to re-circulate baggage through a series of rectangular shaped slats overlapped and linked to form a continuous loop.

More information

.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1.

.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. PAGE 1 PART 1 GENERAL 1.1 REFERENCE.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. 1.2 RELATED WORK SPECIFIED ELSEWHERE.1 Installation

More information

Limit switch set BOA-H DN PN 16/25 Material variant EN-GJS LT

Limit switch set BOA-H DN PN 16/25 Material variant EN-GJS LT Assembly instructions 0570.812/04-EN Limit switch set BOA-H DN 15-150 PN 16/25 Material variant EN-GJS-400-18-LT Fig. 1 Exploded view of limit switch set... 2 Fig. 2 Parts list for limit switch set...

More information