Step 2: Extend the compass from the chosen endpoint so that the width of the compass is more than half the distance between the two points.

Size: px
Start display at page:

Download "Step 2: Extend the compass from the chosen endpoint so that the width of the compass is more than half the distance between the two points."

Transcription

1 Student Name: Teacher: Date: District: Miami-Dade County Public Schools Test: 9_12 Mathematics Geometry Exam 1 Description: GEO Topic 1 Test: Tools of Geometry Form: A student followed the given steps below to complete a construction. Step 1: Place the compass on one endpoint of the line segment. Step 2: Extend the compass from the chosen endpoint so that the width of the compass is more than half the distance between the two points. Step 3: Without changing the compass width, draw an arc on each side of the line segment. Step 4: Without changing the compass width, repeat the process from Step 3 on the other endpoint of the line segment, making sure that the two new arcs intersect the first two arcs that were constructed. Step 5: Plot a point on the intersection of the two arcs on each side of the line segment. Step 6: Use a straightedge to draw a line between the two points. Which type of construction is best represented by the steps given above? A. perpendicular bisector of a line segment B. angle congruent to a given angle C. parallel line through a point not on the given line D. bisector of an angle 2. If T is the midpoint of and V lies between R and T, which statement must be true? A. B. C. D.

2 3. Duplicating an angle can be accomplished using a compass and a straightedge. An example of duplicating Angle PQR is shown below. How many of the construction marks were made using a compass? A. 2 B. 3 C. 4 D What is being constructed in the figure? A. B. C. D. 5. An angle is a geometric figure that consists of A. two intersecting lines. B. a number between 0 and 360. C. two rays with a common endpoint. D. two distinct points and all the points between them.

3 6. A team of students created the following diagram based upon given information. A. B. C. Since the given information is unknown and is not listed, which is the only conclusion that can be made from the diagram created? D. are complementary 7. In the figure below, is parallel to Which statement proves that A. If two parallel lines are cut by a transversal, the alternate interior angles are congruent. B. If two parallel lines are cut by a transversal, the alternate exterior angles are congruent. C. If two parallel lines are cut by a transversal, the corresponding angles are congruent. D. If two parallel lines are cut by a transversal, the vertical angles are congruent.

4 8. Consider this definition. A circle is the set of all points in a plane at a certain distance, its radius, from a certain point, its center. Which of the following words in the definition is an undefined term used in geometry? A. point B. radius C. center D. distance 9. In the diagram, which construction is being demonstrated? A. The first marks for constructing an altitude. B. The first marks for constructing an isosceles triangle. C. The first marks for constructing an equilateral triangle. D. The first marks for constructing a perpendicular bisector. 10. Given any three noncollinear points P, Q, and R, which geometric figure are we always able to construct? A. A circle with diameter PQ that passes through R B. A circle with center P and passing through Q and R C. A rectangle with vertices P and Q, whose diagonals intersect at R D. A triangle with vertices P, Q, and R

5 11. In this figure, lines a, b, c, d, and e intersect as shown. Based on the angle measures, which pair of lines is parallel? A. a and b B. c and e C. c and d D. d and e 12. Which of the figures below is the correct construction of an angle bisector? A. B. C. D.

6 13. Mandy was working on this proof: In these figures, What is the missing statement for the last step of Mandy s proof? A. Definition of perpendicular lines B. The transitive property of equality C. If 2 angles are congruent to equal angles, then the 2 angles are congruent. D. If 2 angles are complementary to congruent angles, then the 2 angles are congruent. 14. If and which is a valid conclusion? I II III are supplementary angles are complementary angles

7 A. I only B. I and II C. I and III D. I, II, and III 15. In the figure, Lines a and b are intersected by Line t. Which of these statements proves that Lines a and b are parallel? A. B. C. D. 16. What are two lines that intersect to form right angles called? A. oblique B. parallel C. perpendicular D. skew 17. Which conjecture must be true? A. If two angles are adjacent angles, then the angles are supplementary. B. If two congruent angles are supplementary, then the angles are right angles. C. If two congruent angles have a common vertex, then the angles are vertical angles. D. If two angles are both acute angles, then the sum of the angle measures is less than 90.

8 18. In the diagram, parallel lines b and c are cut by transversal t. The informal proof below the diagram lists the reasons needed to justify 1. since vertical angles are congruent. 2. since. 3. since vertical angles are congruent. 4. due to the transitive property of equality. Which of the following is an acceptable justification for Statement 2? A. vertical angles are congruent B. corresponding angles are congruent C. remote interior angles are congruent D. alternate interior angles are congruent 19. Which statement describes two parallel lines? A. They do not intersect and they lie on the same plane. B. They do not intersect and they do not lie on the same plane. C. They intersect at a point and form right angles. D. They intersect at a point but do not form right angles.

9 20. Jordan has to prove the theorem that states: If two lines are cut by a transversal so that consecutive interior angles are supplementary, then the lines are parallel. She decides to solve it by indirect proof using the diagram below. Which sentence should be Jordan s first statement? A. Assume that Line r is not parallel to Line m. B. Assume are not congruent. C. Assume that Angles 1 and 2 are not consecutive. D. Assume are not supplementary. 21. Consider this proof:

10 Which reason could be used to justify Statement 3 in this proof? A. subtraction property of equality B. substitution property of equality C. definition of supplementary D. definition of complementary 22. The piece of art below was created with strings of different lengths strung in straight line segments across the canvas. Angle 1 and Angle 2 are formed by the intersection of different strings, but both angles have a measure of 72. Which statement about the geometric relationships formed by the strings in the art must be true? A. Angle 1 and Angle 2 are complementary angles. B. Angle 1 and Angle 2 are vertical angles. C. Line t and Line n are perpendicular. D. Line s and Line t are parallel.

Geometry Vocabulary Book

Geometry Vocabulary Book Geometry Vocabulary Book Units 2-4 Page 1 Unit 2 General Geometry Point Characteristics: Line Characteristics: Plane Characteristics: RELATED POSTULATES: Through any two points there exists exactly one

More information

Geometry by Jurgensen, Brown and Jurgensen Postulates and Theorems from Chapter 1

Geometry by Jurgensen, Brown and Jurgensen Postulates and Theorems from Chapter 1 Postulates and Theorems from Chapter 1 Postulate 1: The Ruler Postulate 1. The points on a line can be paired with the real numbers in such a way that any two points can have coordinates 0 and 1. 2. Once

More information

Name Period GEOMETRY CHAPTER 3 Perpendicular and Parallel Lines Section 3.1 Lines and Angles GOAL 1: Relationship between lines

Name Period GEOMETRY CHAPTER 3 Perpendicular and Parallel Lines Section 3.1 Lines and Angles GOAL 1: Relationship between lines Name Period GEOMETRY CHAPTER 3 Perpendicular and Parallel Lines Section 3.1 Lines and Angles GOAL 1: Relationship between lines Two lines are if they are coplanar and do not intersect. Skew lines. Two

More information

Find the coordinates of the midpoint of a segment having the given endpoints.

Find the coordinates of the midpoint of a segment having the given endpoints. G.(2) Coordinate and transformational geometry. The student uses the process skills to understand the connections between algebra and geometry and uses the one- and two-dimensional coordinate systems to

More information

Lesson 9.1 Assignment

Lesson 9.1 Assignment Lesson 9.1 Assignment Name Date Earth Measure Introduction to Geometry and Geometric Constructions Use a compass and a straightedge to complete Questions 1 and 2. 1. Construct a flower with 12 petals by

More information

Constructions. Unit 9 Lesson 7

Constructions. Unit 9 Lesson 7 Constructions Unit 9 Lesson 7 CONSTRUCTIONS Students will be able to: Understand the meanings of Constructions Key Vocabulary: Constructions Tools of Constructions Basic geometric constructions CONSTRUCTIONS

More information

Indicate whether the statement is true or false.

Indicate whether the statement is true or false. MATH 121 SPRING 2017 - PRACTICE FINAL EXAM Indicate whether the statement is true or false. 1. Given that point P is the midpoint of both and, it follows that. 2. If, then. 3. In a circle (or congruent

More information

CHAPTER 3. Parallel & Perpendicular lines

CHAPTER 3. Parallel & Perpendicular lines CHAPTER 3 Parallel & Perpendicular lines 3.1- Identify Pairs of Lines and Angles Parallel Lines: two lines are parallel if they do not intersect and are coplaner Skew lines: Two lines are skew if they

More information

Sec Geometry - Constructions

Sec Geometry - Constructions Sec 2.2 - Geometry - Constructions Name: 1. [COPY SEGMENT] Construct a segment with an endpoint of C and congruent to the segment AB. A B C **Using a ruler measure the two lengths to make sure they have

More information

Assignment. Visiting Washington, D.C. Transversals and Parallel Lines

Assignment. Visiting Washington, D.C. Transversals and Parallel Lines Assignment Assignment for Lesson.1 Name Date Visiting Washington, D.C. Transversals and Parallel Lines Do not use a protractor in this assignment. Rely only on the measurements given in each problem. 1.

More information

1. Construct the perpendicular bisector of a line segment. Or, construct the midpoint of a line segment. 1. Begin with line segment XY.

1. Construct the perpendicular bisector of a line segment. Or, construct the midpoint of a line segment. 1. Begin with line segment XY. 1. onstruct the perpendicular bisector of a line segment. Or, construct the midpoint of a line segment. 1. egin with line segment. 2. lace the compass at point. djust the compass radius so that it is more

More information

CONSTRUCTION #1: Segment Copy

CONSTRUCTION #1: Segment Copy CONSTRUCTION #1: Segment Copy Objective: Given a line segment, construct a line segment congruent to the given one. Procedure: After doing this Your work should look like this Start with a line segment

More information

Ch. 3 Parallel and Perpendicular Lines

Ch. 3 Parallel and Perpendicular Lines Ch. 3 Parallel and Perpendicular Lines Section 3.1 Lines and Angles 1. I CAN identify relationships between figures in space. 2. I CAN identify angles formed by two lines and a transversal. Key Vocabulary:

More information

16. DOK 1, I will succeed." In this conditional statement, the underlined portion is

16. DOK 1, I will succeed. In this conditional statement, the underlined portion is Geometry Semester 1 REVIEW 1. DOK 1 The point that divides a line segment into two congruent segments. 2. DOK 1 lines have the same slope. 3. DOK 1 If you have two parallel lines and a transversal, then

More information

Target 5.4: Use angle properties in triangles to determine unknown angle measurements 5.4: Parallel Lines and Triangles

Target 5.4: Use angle properties in triangles to determine unknown angle measurements 5.4: Parallel Lines and Triangles Unit 5 Parallel and Perpendicular Lines Target 5.1: Classify and identify angles formed by parallel lines and transversals 5.1 a Parallel and Perpendicular lines 5.1b Parallel Lines and its Angle Relationships

More information

Circles Assignment Answer the following questions.

Circles Assignment Answer the following questions. Answer the following questions. 1. Define constructions. 2. What are the basic tools that are used to draw geometric constructions? 3. What is the use of constructions? 4. What is Compass? 5. What is Straight

More information

Unit 1 Foundations of Geometry: Vocabulary, Reasoning and Tools

Unit 1 Foundations of Geometry: Vocabulary, Reasoning and Tools Number of Days: 34 9/5/17-10/20/17 Unit Goals Stage 1 Unit Description: Using building blocks from Algebra 1, students will use a variety of tools and techniques to construct, understand, and prove geometric

More information

Chapter 2 Review WS Period: Date:

Chapter 2 Review WS Period: Date: Geometry Name: Chapter 2 Review WS Period: Date:. A transversal intersects two parallel lines. The measures of a pair of alternate interior angles are 5v and 2w. The measures of a pair of same-side exterior

More information

Geometry SOL G.4 Constructions Name Date Block. Constructions

Geometry SOL G.4 Constructions Name Date Block. Constructions Geometry SOL G.4 Constructions Mrs. Grieser Name Date Block Constructions Grab your compass and straight edge - it s time to learn about constructions!! On the following pages you will find instructions

More information

The 7* Basic Constructions Guided Notes

The 7* Basic Constructions Guided Notes Name: The 7* asic Constructions Guided Notes Included: 1. Given an segment, construct a 2 nd segment congruent to the original. (ctually not included!) 2. Given an angle, construct a 2 nd angle congruent

More information

Constructing Angle Bisectors and Parallel Lines

Constructing Angle Bisectors and Parallel Lines Name: Date: Period: Constructing Angle Bisectors and Parallel Lines TASK A: 1) Complete the following steps below. a. Draw a circle centered on point P. b. Mark any two points on the circle that are not

More information

Name: Date: Chapter 2 Quiz Geometry. Multiple Choice Identify the choice that best completes the statement or answers the question.

Name: Date: Chapter 2 Quiz Geometry. Multiple Choice Identify the choice that best completes the statement or answers the question. Name: Date: Chapter 2 Quiz Geometry Multiple Choice Identify the choice that best completes the statement or answers the question. 1. What is the value of x? Identify the missing justifications.,, and.

More information

Worksheet 10 Memorandum: Construction of Geometric Figures. Grade 9 Mathematics

Worksheet 10 Memorandum: Construction of Geometric Figures. Grade 9 Mathematics Worksheet 10 Memorandum: Construction of Geometric Figures Grade 9 Mathematics For each of the answers below, we give the steps to complete the task given. We ve used the following resources if you would

More information

Perry High School. Geometry: Week 3

Perry High School. Geometry: Week 3 Geometry: Week 3 Monday: Labor Day! Tuesday: 1.5 Segments and Angle Bisectors Wednesday: 1.5 - Work Thursday: 1.6 Angle Pair Relationships Friday: 1.6-Work Next Week 1.7, Review, Exam 1 on FRIDAY 1 Tuesday:

More information

Challenges from Ancient Greece

Challenges from Ancient Greece Challenges from ncient Greece Mathematical goals Make formal geometric constructions with a variety of tools and methods. Use congruent triangles to justify geometric constructions. Common Core State Standards

More information

3. Given the similarity transformation shown below; identify the composition:

3. Given the similarity transformation shown below; identify the composition: Midterm Multiple Choice Practice 1. Based on the construction below, which statement must be true? 1 1) m ABD m CBD 2 2) m ABD m CBD 3) m ABD m ABC 1 4) m CBD m ABD 2 2. Line segment AB is shown in the

More information

Geometry - Midterm Exam Review - Chapters 1, 2

Geometry - Midterm Exam Review - Chapters 1, 2 Geometry - Midterm Exam Review - Chapters 1, 2 1. Name three points in the diagram that are not collinear. 2. Describe what the notation stands for. Illustrate with a sketch. 3. Draw four points, A, B,

More information

You MUST know the big 3 formulas!

You MUST know the big 3 formulas! Name 3-13 Review Geometry Period Date Unit 3 Lines and angles Review 3-1 Writing equations of lines. Determining slope and y intercept given an equation Writing the equation of a line given a graph. Graphing

More information

Geometric Constructions

Geometric Constructions Geometric onstructions (1) opying a segment (a) Using your compass, place the pointer at Point and extend it until reaches Point. Your compass now has the measure of. (b) Place your pointer at, and then

More information

The Basics: Geometric Structure

The Basics: Geometric Structure Trinity University Digital Commons @ Trinity Understanding by Design: Complete Collection Understanding by Design Summer 6-2015 The Basics: Geometric Structure Danielle Kendrick Trinity University Follow

More information

Regents Exam Questions by Topic Page 1 TOOLS OF GEOMETRY: Constructions NAME:

Regents Exam Questions by Topic Page 1 TOOLS OF GEOMETRY: Constructions   NAME: Regents Exam Questions by Topic Page 1 1. 060925ge, P.I. G.G.17 Which illustration shows the correct construction of an angle bisector? [A] 3. 060022a, P.I. G.G.17 Using only a ruler and compass, construct

More information

Downloaded from

Downloaded from 1 IX Mathematics Chapter 8: Quadrilaterals Chapter Notes Top Definitions 1. A quadrilateral is a closed figure obtained by joining four points (with no three points collinear) in an order. 2. A diagonal

More information

UNIT 1 SIMILARITY, CONGRUENCE, AND PROOFS Lesson 2: Constructing Lines, Segments, and Angles Instruction

UNIT 1 SIMILARITY, CONGRUENCE, AND PROOFS Lesson 2: Constructing Lines, Segments, and Angles Instruction Prerequisite Skills This lesson requires the use of the following skills: using a compass understanding the geometry terms line, segment, ray, and angle Introduction Two basic instruments used in geometry

More information

October 16, proving lines parallel ink.notebook. page Prove Lines Parallel. page 113. Standards. page 115.

October 16, proving lines parallel ink.notebook. page Prove Lines Parallel. page 113. Standards. page 115. 3.5 proving lines parallel ink.notebook page 113 page 114 3.5 Prove Lines Parallel Lesson Objectives page 115 Standards Lesson Notes page 116 3.5 Proving Lines Parallel Press the tabs to view details.

More information

S. Stirling Page 1 of 14

S. Stirling Page 1 of 14 3.1 Duplicating Segments and ngles [and riangles] hese notes replace pages 144 146 in the book. You can read these pages for extra clarifications. Instructions for making geometric figures: You can sketch

More information

Geometry Midterm Review Spring 2011 Name Date Period. 2. Name three points that are collinear Name a pair of opposite rays. 3.

Geometry Midterm Review Spring 2011 Name Date Period. 2. Name three points that are collinear Name a pair of opposite rays. 3. Name Date Period Unit 1 1. Give two other names for AB. 1. 2. Name three points that are collinear. 2. 3. Name a pair of opposite rays. 3. 4. Give another name for CD. 4. Point J is between H and K on

More information

(Geometry) Academic Standard: TLW use appropriate tools to perform basic geometric constructions.

(Geometry) Academic Standard: TLW use appropriate tools to perform basic geometric constructions. Seventh Grade Mathematics Assessments page 1 (Geometry) Academic Standard: TLW use appropriate tools to perform basic geometric constructions. A. TLW use tools to draw squares, rectangles, triangles and

More information

Using Geometry. 9.1 Earth Measure. 9.2 Angles and More Angles. 9.3 Special Angles. Introduction to Geometry and Geometric Constructions...

Using Geometry. 9.1 Earth Measure. 9.2 Angles and More Angles. 9.3 Special Angles. Introduction to Geometry and Geometric Constructions... Using Geometry Recognize these tools? The one on the right is a protractor, which has been used since ancient times to measure angles. The one on the left is a compass, used to create arcs and circles.

More information

Locus Locus. Remarks

Locus Locus. Remarks 4 4. The locus of a point is the path traced out by the point moving under given geometrical condition (or conditions). lternatively, the locus is the set of all those points which satisfy the given geometrical

More information

E G 2 3. MATH 1012 Section 8.1 Basic Geometric Terms Bland

E G 2 3. MATH 1012 Section 8.1 Basic Geometric Terms Bland MATH 1012 Section 8.1 Basic Geometric Terms Bland Point A point is a location in space. It has no length or width. A point is represented by a dot and is named by writing a capital letter next to the dot.

More information

Objective: Use a compass and straight edge to construct congruent segments and angles.

Objective: Use a compass and straight edge to construct congruent segments and angles. CONSTRUCTIONS Objective: Use a compass and straight edge to construct congruent segments and angles. Introduction to Constructions Constructions: The drawing of various shapes using only a pair of compasses

More information

UNIT 1 GEOMETRY. (revision from 1 st ESO) Unit 8 in our books

UNIT 1 GEOMETRY. (revision from 1 st ESO) Unit 8 in our books UNIT 1 GEOMETRY (revision from 1 st ESO) Unit 8 in our books WHAT'S GEOMETRY? Geometry is the study of the size, shape and position of 2 dimensional shapes and 3 dimensional figures. In geometry, one explores

More information

2.2. Special Angles and Postulates. Key Terms

2.2. Special Angles and Postulates. Key Terms And Now From a New Angle Special Angles and Postulates. Learning Goals Key Terms In this lesson, you will: Calculate the complement and supplement of an angle. Classify adjacent angles, linear pairs, and

More information

Objective: Use a compass and straight edge to construct congruent segments and angles.

Objective: Use a compass and straight edge to construct congruent segments and angles. CONSTRUCTIONS Objective: Use a compass and straight edge to construct congruent segments and angles. Oct 1 8:33 AM Oct 2 7:42 AM 1 Introduction to Constructions Constructions: The drawing of various shapes

More information

Name Period Date. GEOMETRY AND MEASURESUREMENT Student Pages for Packet 6: Drawings and Constructions

Name Period Date. GEOMETRY AND MEASURESUREMENT Student Pages for Packet 6: Drawings and Constructions Name Period Date GEOMETRY AND MEASURESUREMENT Student Pages for Packet 6: Drawings and Constructions GEO6.1 Geometric Drawings Review geometric notation and vocabulary. Use a compass and a ruler to make

More information

Geometry Station Activities for Common Core State Standards

Geometry Station Activities for Common Core State Standards Geometry Station Activities for Common Core State Standards WALCH EDUCATION Table of Contents Standards Correlations...................................................... v Introduction..............................................................vii

More information

3 Kevin s work for deriving the equation of a circle is shown below.

3 Kevin s work for deriving the equation of a circle is shown below. June 2016 1. A student has a rectangular postcard that he folds in half lengthwise. Next, he rotates it continuously about the folded edge. Which three-dimensional object below is generated by this rotation?

More information

The diagram shows the construction of PS through point F that is parallel to RQ. Can the statement justify that. Unit 4, 29.2

The diagram shows the construction of PS through point F that is parallel to RQ. Can the statement justify that. Unit 4, 29.2 In the construction for bisecting a segment, make sure you open the compass to a length half the length of the line segment and use the same setting to draw an arc from each endpoint. Unit 4, 29.1 In the

More information

PENNSYLVANIA. List properties, classify, draw, and identify geometric figures in two dimensions.

PENNSYLVANIA. List properties, classify, draw, and identify geometric figures in two dimensions. Know: Understand: Do: CC.2.3.4.A.1 -- Draw lines and angles and identify these in two-dimensional figures. CC.2.3.4.A.2 -- Classify twodimensional figures by properties of their lines and angles. CC.2.3.4.A.3

More information

Geometry Ch 3 Vertical Angles, Linear Pairs, Perpendicular/Parallel Lines 29 Nov 2017

Geometry Ch 3 Vertical Angles, Linear Pairs, Perpendicular/Parallel Lines 29 Nov 2017 3.1 Number Operations and Equality Algebraic Postulates of Equality: Reflexive Property: a=a (Any number is equal to itself.) Substitution Property: If a=b, then a can be substituted for b in any expression.

More information

June 2016 Regents GEOMETRY COMMON CORE

June 2016 Regents GEOMETRY COMMON CORE 1 A student has a rectangular postcard that he folds in half lengthwise. Next, he rotates it continuously about the folded edge. Which three-dimensional object below is generated by this rotation? 4) 2

More information

Table of Contents. Standards Correlations...v Introduction...vii Materials List... x

Table of Contents. Standards Correlations...v Introduction...vii Materials List... x Table of Contents Standards Correlations...v Introduction...vii Materials List... x...1...1 Set 2: Classifying Triangles and Angle Theorems... 13 Set 3: Corresponding Parts, Transformations, and Proof...

More information

Geometer s Skethchpad 8th Grade Guide to Learning Geometry

Geometer s Skethchpad 8th Grade Guide to Learning Geometry Geometer s Skethchpad 8th Grade Guide to Learning Geometry This Guide Belongs to: Date: Table of Contents Using Sketchpad - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

More information

Parallel Lines Chapter Problems

Parallel Lines Chapter Problems Parallel Lines Chapter Problems Lines: Intersecting, parallel & skew Class Work Use image 1 1. Name all segments parallel to GH : 2. Name all segments skew to GH : 3. Name all segments intersecting with

More information

THINGS TO DO WITH A GEOBOARD

THINGS TO DO WITH A GEOBOARD THINGS TO DO WITH A GEOBOARD The following list of suggestions is indicative of exercises and examples that can be worked on the geoboard. Simpler, as well as, more difficult suggestions can easily be

More information

Lesson 10.1 Skills Practice

Lesson 10.1 Skills Practice Lesson 10.1 Skills Practice Location, Location, Location! Line Relationships Vocabulary Write the term or terms from the box that best complete each statement. intersecting lines perpendicular lines parallel

More information

ONE. angles which I already know

ONE. angles which I already know Name Geometry Period ONE Ticket In Date Ticket In the Door! After watching the assigned video and learning how to construct a perpendicular line through a point, you will perform this construction below

More information

Using inductive reasoning and conjectures Student Activity Sheet 2; use with Exploring The language of geometry

Using inductive reasoning and conjectures Student Activity Sheet 2; use with Exploring The language of geometry 1. REINFORCE Find a geometric representation for the following sequence of numbers. 3, 4, 5, 6, 7, 2. What are the three undefined terms in geometry? 3. Write a description of a point. How are points labeled?

More information

The Magic Circle Basic Lesson. Developed by The Alexandria Seaport Foundation

The Magic Circle Basic Lesson. Developed by The Alexandria Seaport Foundation The Magic Circle Basic Lesson Developed by The Alexandria Seaport Foundation The Tools Needed Compass Straightedge Pencil Paper (not graph paper, 8.5 x 11 is fine) Your Brain (the most important tool!)

More information

Parallels and Euclidean Geometry

Parallels and Euclidean Geometry Parallels and Euclidean Geometry Lines l and m which are coplanar but do not meet are said to be parallel; we denote this by writing l m. Likewise, segments or rays are parallel if they are subsets of

More information

Course: Math Grade: 7. Unit Plan: Geometry. Length of Unit:

Course: Math Grade: 7. Unit Plan: Geometry. Length of Unit: Course: Math Grade: 7 Unit Plan: Geometry Length of Unit: Enduring Understanding(s): Geometry is found in the visual world in two and three dimension. We use geometry daily in problem solving. Essential

More information

Parallel and Perpendicular Lines on the Coordinate Plane

Parallel and Perpendicular Lines on the Coordinate Plane Did You Find a Parking Space? Parallel and Perpendicular Lines on the Coordinate Plane 1.5 Learning Goals Key Term In this lesson, you will: Determine whether lines are parallel. Identify and write the

More information

UNIT 1 SIMILARITY, CONGRUENCE, AND PROOFS Lesson 3: Constructing Polygons Instruction

UNIT 1 SIMILARITY, CONGRUENCE, AND PROOFS Lesson 3: Constructing Polygons Instruction rerequisite Skills This lesson requires the use of the following skills: using a compass copying and bisecting line segments constructing perpendicular lines constructing circles of a given radius Introduction

More information

Table of Contents. Constructions Day 1... Pages 1-5 HW: Page 6. Constructions Day 2... Pages 7-14 HW: Page 15

Table of Contents. Constructions Day 1... Pages 1-5 HW: Page 6. Constructions Day 2... Pages 7-14 HW: Page 15 CONSTRUCTIONS Table of Contents Constructions Day 1...... Pages 1-5 HW: Page 6 Constructions Day 2.... Pages 7-14 HW: Page 15 Constructions Day 3.... Pages 16-21 HW: Pages 22-24 Constructions Day 4....

More information

6.1 Justifying Constructions

6.1 Justifying Constructions Name lass ate 6.1 Justifying onstructions Essential Question: How can you be sure that the result of a construction is valid? Resource Locker Explore 1 Using a Reflective evice to onstruct a erpendicular

More information

Chapter 3 Parallel and Perpendicular Lines Geometry. 4. For, how many perpendicular lines pass through point V? What line is this?

Chapter 3 Parallel and Perpendicular Lines Geometry. 4. For, how many perpendicular lines pass through point V? What line is this? Chapter 3 Parallel and Perpendicular Lines Geometry Name For 1-5, use the figure below. The two pentagons are parallel and all of the rectangular sides are perpendicular to both of them. 1. Find two pairs

More information

Parallel Postulate. Perpendicular Postulate PARALLEL AND SKEW LINES WITH PARALLEL PLANES. Lines m and n are. Lines m and k are. Planes T and U are.

Parallel Postulate. Perpendicular Postulate PARALLEL AND SKEW LINES WITH PARALLEL PLANES. Lines m and n are. Lines m and k are. Planes T and U are. Unit 6: Parallel and Perpendicular Lines Lesson 6.1: Identify Pairs of Lines and Angles Lesson 3.1 from textbook Objectives Identify relationships between lines such as parallel and skew. Understand and

More information

Angles formed by Transversals

Angles formed by Transversals Section 3-1: Parallel Lines and Transversals SOL: None Objectives: Identify the relationships between two lines or two planes Name angles formed by a pair of lines and a transversal Vocabulary: Parallel

More information

Name. Ms. Nong. Due on: Per: Geometry 2 nd semester Math packet # 2 Standards: 8.0 and 16.0

Name. Ms. Nong. Due on: Per: Geometry 2 nd semester Math packet # 2 Standards: 8.0 and 16.0 Name FRIDAY, FEBRUARY 24 Due on: Per: TH Geometry 2 nd semester Math packet # 2 Standards: 8.0 and 16.0 8.0 Students know, derive, and solve problems involving the perimeter, circumference, area, volume

More information

Angle Measure and Plane Figures

Angle Measure and Plane Figures Grade 4 Module 4 Angle Measure and Plane Figures OVERVIEW This module introduces points, lines, line segments, rays, and angles, as well as the relationships between them. Students construct, recognize,

More information

Pre-Test. Name Date. 1. Can skew lines be coplanar? Explain.

Pre-Test. Name Date. 1. Can skew lines be coplanar? Explain. Pre-Test Name Date 1. Can skew lines be coplanar? Explain. 2. Point D is at the center of a circle. Points A, B, and C are on the same arc of the circle. What can you say about the lengths of AD, BD, and

More information

(1) Page 482 #1 20. (2) Page 488 #1 14. (3) Page # (4) Page 495 #1 10. (5) Page #12 30,

(1) Page 482 #1 20. (2) Page 488 #1 14. (3) Page # (4) Page 495 #1 10. (5) Page #12 30, Geometry/Trigonometry Unit 8: Circles Notes Name: Date: Period: # (1) Page 482 #1 20 (2) Page 488 #1 14 (3) Page 488 489 #15 26 (4) Page 495 #1 10 (5) Page 495 496 #12 30, 37 39 (6) Page 502 #1 7 (7) Page

More information

Mathematical Construction

Mathematical Construction Mathematical Construction Full illustrated instructions for the two bisectors: Perpendicular bisector Angle bisector Full illustrated instructions for the three triangles: ASA SAS SSS Note: These documents

More information

Project Maths Geometry Notes

Project Maths Geometry Notes The areas that you need to study are: Project Maths Geometry Notes (i) Geometry Terms: (ii) Theorems: (iii) Constructions: (iv) Enlargements: Axiom, theorem, proof, corollary, converse, implies The exam

More information

Angles with Parallel Lines Topic Index Geometry Index Regents Exam Prep Center

Angles with Parallel Lines Topic Index Geometry Index Regents Exam Prep Center Angles with Parallel Lines Topic Index Geometry Index Regents Exam Prep Center A transversal is a line that intersects two or more lines (in the same plane). When lines intersect, angles are formed in

More information

9.5 Properties and Conditions for Kites and Trapezoids

9.5 Properties and Conditions for Kites and Trapezoids Name lass ate 9.5 Properties and onditions for Kites and Trapezoids ssential uestion: What are the properties of kites and trapezoids? Resource Locker xplore xploring Properties of Kites kite is a quadrilateral

More information

Geometry Benchmark Assessment #1

Geometry Benchmark Assessment #1 Geometry Benchmark Assessment #1 Multiple Choice Circle the letter of the choice that best completes the statement or answers the question. 1. When the net is folded into the rectangular prism shown beside

More information

1. What term describes a transformation that does not change a figure s size or shape?

1. What term describes a transformation that does not change a figure s size or shape? 1. What term describes a transformation that does not change a figure s size or shape? () similarity () isometry () collinearity (D) symmetry For questions 2 4, use the diagram showing parallelogram D.

More information

CCM Unit 10 Angle Relationships

CCM Unit 10 Angle Relationships CCM6+7+ Unit 10 Angle Relationships ~ Page 1 CCM6+7+ 2016-17 Unit 10 Angle Relationships Name Teacher Projected Test Date Main Concepts Page(s) Unit 10 Vocabulary 2-3 Measuring Angles with Protractors

More information

L7 Constructions 7.1 Construction Introduction Per Date

L7 Constructions 7.1 Construction Introduction Per Date 7.1 Construction Introduction Per Date In pairs, discuss the meanings of the following vocabulary terms. The first two you should attempt to recall from memory, and for the rest you should try to agree

More information

Axiom A-1: To every angle there corresponds a unique, real number, 0 < < 180.

Axiom A-1: To every angle there corresponds a unique, real number, 0 < < 180. Axiom A-1: To every angle there corresponds a unique, real number, 0 < < 180. We denote the measure of ABC by m ABC. (Temporary Definition): A point D lies in the interior of ABC iff there exists a segment

More information

Constructing Perpendiculars to a Line. Finding the Right Line. Draw a line and a point labeled P not on the line, as shown above.

Constructing Perpendiculars to a Line. Finding the Right Line. Draw a line and a point labeled P not on the line, as shown above. Page 1 of 5 3.3 Intelligence plus character that is the goal of true education. MARTIN LUTHER KING, JR. Constructing Perpendiculars to a Line If you are in a room, look over at one of the walls. What is

More information

Let s Get This Started!

Let s Get This Started! Lesson 1.1 Assignment 1 Name Date Let s Get This Started! Points, Lines, Planes, Rays, and Line Segments 1. Identify each of the following in the figure shown. a. Name all points. W X p b. Name all lines.

More information

Title: Quadrilaterals Aren t Just Squares

Title: Quadrilaterals Aren t Just Squares Title: Quadrilaterals ren t Just Squares Brief Overview: This is a collection of the first three lessons in a series of seven lessons studying characteristics of quadrilaterals, including trapezoids, parallelograms,

More information

3 In the diagram below, the vertices of DEF are the midpoints of the sides of equilateral triangle ABC, and the perimeter of ABC is 36 cm.

3 In the diagram below, the vertices of DEF are the midpoints of the sides of equilateral triangle ABC, and the perimeter of ABC is 36 cm. 1 In the diagram below, ABC XYZ. 3 In the diagram below, the vertices of DEF are the midpoints of the sides of equilateral triangle ABC, and the perimeter of ABC is 36 cm. Which two statements identify

More information

AGS Math Algebra 2 Correlated to Kentucky Academic Expectations for Mathematics Grades 6 High School

AGS Math Algebra 2 Correlated to Kentucky Academic Expectations for Mathematics Grades 6 High School AGS Math Algebra 2 Correlated to Kentucky Academic Expectations for Mathematics Grades 6 High School Copyright 2008 Pearson Education, Inc. or its affiliate(s). All rights reserved AGS Math Algebra 2 Grade

More information

9.1 and 9.2 Introduction to Circles

9.1 and 9.2 Introduction to Circles Date: Secondary Math 2 Vocabulary 9.1 and 9.2 Introduction to Circles Define the following terms and identify them on the circle: Circle: The set of all points in a plane that are equidistant from a given

More information

Downloaded from

Downloaded from Understanding Elementary Shapes 1 1.In the given figure, lines l and m are.. to each other. (A) perpendicular (B) parallel (C) intersect (D) None of them. 2.a) If a clock hand starts from 12 and stops

More information

Parallel Line Converse Theorems. Key Terms

Parallel Line Converse Theorems. Key Terms A Reversed Condition Parallel Line Converse Theorems.5 Learning Goals Key Terms In this lesson, you will: Write parallel line converse conjectures. Prove parallel line converse conjectures. converse Corresponding

More information

GOAL Practise techniques for creating various types of geometric lines by constructing and reproducing figures. sheet of letter-sized white paper

GOAL Practise techniques for creating various types of geometric lines by constructing and reproducing figures. sheet of letter-sized white paper TECHNIQUE STUDENT BOOK Chapter 11, page 340 TOOLBOX Pages 62 67 GOAL Practise techniques for creating various types of geometric lines by constructing and reproducing figures. MATERIALS drawing board T-square

More information

3.1 Start Thinking. 3.1 Warm Up. 3.1 Cumulative Review Warm Up

3.1 Start Thinking. 3.1 Warm Up. 3.1 Cumulative Review Warm Up 3.1 Start Thinking Sketch two perpendicular lines that intersect at point. Plot one point on each line that is not. all these points and. onnect and to make. What type of figure do points,, and make? ould

More information

1. Use the following directions to draw a figure in the box to the right. a. Draw two points: and. b. Use a straightedge to draw.

1. Use the following directions to draw a figure in the box to the right. a. Draw two points: and. b. Use a straightedge to draw. NYS COMMON CORE MATHEMATICS CURRICULUM Lesson 1 Problem Set 4 Name Date 1. Use the following directions to draw a figure in the box to the right. a. Draw two points: and. b. Use a straightedge to draw.

More information

Lesson 25 Angle Relationships Worksheet Answers

Lesson 25 Angle Relationships Worksheet Answers LESSON 25 ANGLE RELATIONSHIPS WORKSHEET ANSWERS PDF - Are you looking for lesson 25 angle relationships worksheet answers Books? Now, you will be happy that at this time lesson 25 angle relationships worksheet

More information

Big Ideas Math: A Common Core Curriculum Geometry 2015 Correlated to Common Core State Standards for High School Geometry

Big Ideas Math: A Common Core Curriculum Geometry 2015 Correlated to Common Core State Standards for High School Geometry Common Core State s for High School Geometry Conceptual Category: Geometry Domain: The Number System G.CO.1 Know precise definitions of angle, circle, perpendicular line, parallel line, and line segment,

More information

16.1 Segment Length and Midpoints

16.1 Segment Length and Midpoints Name lass ate 16.1 Segment Length and Midpoints Essential Question: How do you draw a segment and measure its length? Explore Exploring asic Geometric Terms In geometry, some of the names of figures and

More information

Measuring and Drawing Angles and Triangles

Measuring and Drawing Angles and Triangles NME DTE Measuring and Drawing ngles and Triangles Measuring an angle 30 arm origin base line 0 180 0 If the arms are too short to reach the protractor scale, lengthen them. Step 1: lace the origin of the

More information

1 st Subject: 2D Geometric Shape Construction and Division

1 st Subject: 2D Geometric Shape Construction and Division Joint Beginning and Intermediate Engineering Graphics 2 nd Week 1st Meeting Lecture Notes Instructor: Edward N. Locke Topic: Geometric Construction 1 st Subject: 2D Geometric Shape Construction and Division

More information

UNIT 3 CIRCLES AND VOLUME Lesson 3: Constructing Tangent Lines Instruction

UNIT 3 CIRCLES AND VOLUME Lesson 3: Constructing Tangent Lines Instruction Prerequisite Skills This lesson requires the use of the following skills: understanding the relationship between perpendicular lines using a compass and a straightedge constructing a perpendicular bisector

More information

TERRA Environmental Research Institute

TERRA Environmental Research Institute TERRA Environmental Research Institute MATHEMATICS FCAT PRACTICE STRAND 3 Geometry and Spatial Sense Angle Relationships Lines and Transversals Plane Figures The Pythagorean Theorem The Coordinate Plane

More information

9.3 Properties of Chords

9.3 Properties of Chords 9.3. Properties of Chords www.ck12.org 9.3 Properties of Chords Learning Objectives Find the lengths of chords in a circle. Discover properties of chords and arcs. Review Queue 1. Draw a chord in a circle.

More information