JIG CYLINDER. JC series. Features. Without magnet. How to order. With magnet
|
|
|
- Alexis McDowell
- 5 years ago
- Views:
Transcription
1 LN series O00 QLT T eatures aterial of parts *ard anodized aluminum barrel provides corrosion and wear resistance as well as long life. *ompact and space saving. *trict quality control ensures the product in stability and excellent performance. *imple maintenance and installation. *ifferent bore s and strokes for selection. *Various sensor switches are available. ithout magnet ow to order 0 PNT LN tandard double O ingle /pring extended (~φ0) Type ingle /pring return (~φ0) troke adjustable mm (~φ0) troke adjustable 0mm (~φ0) rod/ (~φ0) φ 0 φ φ 0 φ0 0 φ0 φ 0 φ0 0 φ0 troke lank od thread emale thread ale thread *Please use stainless setting bolts for magnet type cylinder to mount. lank agnet /O magnet / magnet L ensor type lank /O sensor quare type ound type L0 quare type Number of sensor pc pcs ith magnet PNT LN L pecifications Port luid cting Operating pressure range ax operating pressure arrel material agnet mbient temperature Piston speed mm/ec. ingle mm/ec. φ φ φ φ0 φ0 φ φ0 φ0 xp0. /" /" /" ompressed air or single.0 kgf/cm. kgf/cm luminum alloy Option 0 0~00mm/ec ~ No. escription aterial Qty. arrel ront cover ear cover Piston Piston rod nap ring od seal luminum alloy u u luminum alloy +r pring steel N No. escription aterial Qty. Oring N Piston seal N ushion Plate ushion Plate N N agnet luminum alloy agnet errite magnet 0 hako o., Ltd. hako o., Ltd.
2 LN series O00 QLT T troke table Theoretical force PNT LN odel ingle φ φ φ φ0 φ0 φ φ0 φ0 φ φ φ φ0 φ0 Note:. The body length for the strokes marked. or Nonstandard stroke, please contact our sales. ensor mounting example tandard stroke (mm) is increased of mm as standard. tandard stroke (with magnet) φ φ φ φ0 φ0 φ φ0 φ0 od diameter φ φ φ φ φ φ φ cting ingle ingle ingle ingle ingle ingle ingle ingle ingle ingle ingle ingle Piston area mm Operating pressure kgf/cm PNT LN ormula of cylinder force calculation ormula of cylinder force calculation = P x f :ylinder force (N) P :Operating pressure (pa) :Piston area (mm ) f:riction (N) hako o., Ltd. hako o., Ltd.
3 LN series O00 QLT T tandard double tandard double tandard double ( ~φ) +troke +troke P P tandard double (φ ~φ0) P P + troke + troke P P T P P PNT LN φ φ φ.... P.... ~φ.. xp0.xl xp0.xl xp0.xl xp0.xl φ φ φ φ.. xp0. xp0. xp0. xp0. P P T V.... N O P P *Note: Please add extra mm into column and for the strokes marked on page stroke table. or more details, please refer to page. (nit: mm) /O magnet / magnet L N O P Two sidesφ. Thread xp0. ross holeφ. φ Two sidesφ. Thread xp0. ross holeφ. Two sidesφ. Thread xp0. ross holeφ. φ Two sidesφ.0 Thread xp.0 ross holeφ. 0.. φ φ φ φ hako o., Ltd. hako o., Ltd. φ φ0 φ0 φ φ0 φ0 P. φ φ0 φ0 φ φ0 φ0... L N O.. 0 φ φ φ φ0 φ0 φ φ0 φ0 N xp.0xl xp.xl xp.xl xp.xl xp.xl0 xp.xl0 φ φ φ φ0 φ φ O *Note: Please add extra mm into column and for the strokes marked on page stroke table. or more details, please refer to page. /O magnet / magnet P Two sidesφ.0 Thread xp.0 ross holeφ. Two sidesφ. Thread xp. ross holeφ. Two sidesφ Thread xp. ross holeφ. Two sidesφ Thread xp. ross holeφ. Two sidesφ. Thread xp. ross holeφ. Two sidesφ. Thread xp ross hole.. (nit: mm) xp0. xp0. xp.0 xp. xp. xp. xp. xp. xp. xp. (nit: mm) / / / / / / P P T V φ φ φ0.. PNT LN
4 O ingle /pring extended ( ~φ) T LN O ingle /pring extended (~φ0) +trokex +troke +troke P P P P O series O ingle /pring extended (φ ~φ0) +troke O00 QLT T O ingle /pring extended (~φ0) +trokex P P +troke P P P +troke N O P +troke N O PNT LN φ φ φ P P *Note: Please add extra mm into column and for the strokes marked on page stroke table. or more details, please refer to page. (nit: mm) /O magnet / magnet L N O φ φ xp0.xl xp0.xl xp0.xl xp0.xl φ φ φ φ.. xp0. xp0. xp0. xp0. P Two sidesφ. Thread xp0. ross holeφ. Two sidesφ. Thread xp0. ross holeφ. Two sidesφ. Thread xp0. ross holeφ. Two sidesφ.0 Thread xp.0 ross holeφ. ~φ P P T.. V φ φ φ φ.. hako o., Ltd. hako o., Ltd. φ φ0 φ0 +troke +troke P.. L N O.. 0 Two sidesφ.0 Thread xp.0 ross holeφ. Two sidesφ. Thread xp. ross holeφ. Two sidesφ Thread xp. ross holeφ. φ φ φ φ0 φ0. 0. *Note: Please add extra mm into column and for the strokes marked on page stroke table. or more details, please refer to page. /O magnet / magnet φ φ0 φ0 xp.0xl xp.xl xp.xl P P φ φ φ T 0. V φ (nit: mm) xp0. xp0. xp.0 xp. xp. xp. xp. (nit: mm) / / /... PNT LN
5 LN series O00 QLT T ingle /pring return (~φ0) ingle /pring return (~φ0) ingle /pring return ( ~φ) ingle /pring return (φ ~φ0) +troke +troke T P P +troke P P P P +troke P P PNT LN φ φ φ φ φ.... P P.. P.. Two sidesφ. Thread xp0. ross holeφ. Two sidesφ. Thread xp0. ross holeφ. Two sidesφ. Thread xp0. ross holeφ. Two sidesφ.0 Thread xp.0 ross holeφ. L N O.. ~φ *Note: Please add extra mm into column and for the strokes marked on page stroke table. or more details, please refer to page. /O magnet / magnet P P xp0.xl xp0.xl xp0.xl xp0.xl.... N 0 φ φ φ φ T.. P.. V φ φ φ φ (nit: mm) O xp0. xp0. xp0. xp0. T V hako o., Ltd. hako o., Ltd. φ φ0 φ0 φ φ0 φ0 P.. /O magnet P. / magnet. L N O.. 0 Two sidesφ.0 Thread xp.0 ross holeφ. Two sidesφ. Thread xp. ross holeφ. Two sidesφ Thread xp. ross holeφ. φ φ φ φ0 φ0 xp.0xl xp.xl xp.xl P P *Note: Please add extra mm into column and for the strokes marked on page stroke table. or more details, please refer to page. N 0 φ φ φ. O φ (nit: mm) xp0. xp0. xp.0 xp. xp. xp. xp. (nit: mm) / / /... PNT LN
6 LN series O00 QLT T rod/ (~φ) rod/ (φ~φ0) rod/ ( ~φ) rod/ (φ ~φ0) +trokex +troke + troke P P +troke P P P P +trokex +troke P +troke P P N N O PNT LN φ φ +trokex +troke... P +troke +troke. L N O φ φ φ0 φ0 φ φ0 φ0. Two sidesφ. Thread xp0. ross holeφ. Two sidesφ.0 Thread xp.0 ross holeφ. 0.. xp0.xl xp0.xl φ φ V. φ φ (nit: mm) : dimension is increased of mm for magnet type *Note: Please add extra mm into column and for the strokes marked on page stroke table. or more details, please refer to page. /O magnet / magnet P P.. 0 xp.0 xp. xp. xp. xp. xp. xp. xp. (nit: mm) xp0. xp0. 0 hako o., Ltd. hako o., Ltd. φ φ0 φ0 φ φ0 φ0 φ φ0 φ0 φ φ0 φ0 P /O magnet.. / magnet. P. L N O.. 0 Two sidesφ.0 Thread xp.0 ross holeφ. Two sidesφ. Thread xp. ross holeφ. Two sidesφ Thread xp. ross holeφ. Two sidesφ Thread xp. ross holeφ. Two sidesφ. Thread xp. ross holeφ. Two sidesφ. Thread xp ross hole. O *Note: Please add extra mm into column and for the strokes marked on page stroke table. or more details, please refer to page. N xp.0xl xp.xl xp.xl xp.xl xp.xl0 xp.xl0 P P N φ φ φ φ0 φ φ troke. 0. V φ φ φ0 (nit: mm) / / / / / /... PNT LN
7 LN / series O00 QLT T, troke adjustable type(~φ) (djustable stroke: 0~mm, 0~0mm), troke adjustable mm, 0mm (~φ), troke adjustable type(φ~φ0) (djustable stroke: 0~mm, 0~0mm), troke adjustable mm, 0mm (φ~φ0) + troke x + djustable stroke +troke +troke Q+djustable stroke P P P P mm umper pad P P +troke x + djustable stroke +troke +troke Q+djustable stroke P P mm umper pad O PNT LN φ φ P + troke x + djustable stroke +troke.... P +troke mm umper pad. Q+djustable stroke. Two sidesφ. Thread xp0. ross holeφ. Two sidesφ.0 Thread xp.0 ross holeφ. N φ φ φ0 φ0 φ φ0 φ0 : N L N O xp0.xl xp0.xl φ φ dimension is increased of mm for magnet type *Note: Please add extra mm into column and for the strokes marked on page stroke table. or more details, please refer to page. /O magnet / magnet P P Q.. 0. (nit: mm) xp.0 xp. xp. xp. xp. xp. xp. xp. (nit: mm) V φ φ xp0. xp0. Z φ φ hako o., Ltd. hako o., Ltd. P φ φ0 φ0 φ φ0 φ0 φ φ0 φ0 φ φ0 φ0 /O magnet.. / magnet. P... 0 Two sidesφ.0 Thread xp.0 ross holeφ. Two sidesφ. Thread xp. ross holeφ. Two sidesφ Thread xp. ross holeφ. Two sidesφ Thread xp. ross holeφ. Two sidesφ. Thread xp. ross holeφ. Two sidesφ. Thread xp ross hole. *Note: Please add extra mm into column and for the strokes marked on page stroke table. or more details, please refer to page. N P P L N O xp.0xl xp.xl xp.xl xp.xl xp.xl0 xp.xl0 Q.. N O 0. 0 V (nit: mm)... / / / / / / Z φ φ0 φ0 φ0 φ0 φ0 PNT LN
ISO6431 STANDARD CYLINDER
SO SNR YLNR standard cylinder series SO-00 ULY R Symbol Material of parts : SO standard type : ouble piston rod type, : djustable type 0 eatures *dentical to SO standard. *igh quality of aluminum tube
NEW PRODUCT BULLETIN Linear Thrusters
ulletin #G-J0 NW PROUT UTIN inear Thrusters G Series lock Style Slides Tapped holes top, 'bore/thru hole from bottom () Toolbar- nodized aluminum Repairable, built-in air cylinder earing block- nodized
TWIN ROD CYLINDERS 6 CONTENTS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG TWIN ROD CYLINDERS6 CONTENTS TWIN ROD CYLINDERS 6 Features 745 Specifications/Order Codes 747 Inner Construction and Major Parts 748 Dimensions
DURA-THRUST LINEAR THRUSTERS LT SERIES ET SERIES PREMIER LINE REPLACEABLE CYLINDER
DURATHRUST S LT SERIES PREIER LINE Full range of sizes and strokes Internal Cylinder Precision ounting Adjustable Hard Stops Robust design Extremely Durable Fully field serviceable Sensors Ready Page 31.1
70/140M-3 HE 3 HE 2 70/140M-3. Type 70M-3 140M-3. Applicable fluid Seal material. Phosphate ester fluid. Water in oil fluid. Oil in water fluid
2 7/M- 7/M- f f f f f f f f f f f f Type Nominal pressure Maximum allowable pressure roof pressure Minimum operating pressure orking speed range orking temperature range (ambient temp. and oil temp.) tructure
Angular Grippers- Cam Driven Series
RA SERIES Angular Grippers- Cam Driven Series. General Purpose: This style gripper is widely used in the industry and is a rugged design that supplies very high grip force for its size. Cost Effective:
BIG BORE 2G chucks BB-N-EXL2G BB-AZ2G BB-FZA2G BB-EXL-SC2G
Clamping of pipe with IG ORE 2G chucks -Z2G -FZ2G -EXL-C2G IG ORE elf centering Extra long jaw stroke Jaw jogging IG ORE -Z2G elf centering or compensating Extra long jaw stroke afety features: : Pressure
Series ZPT/ZPR. Vacuum Pad: Ball Joint Type. Pad diameters: ø10, ø13, ø16, ø20 ø25, ø32, ø40, ø50
Vacuum Pad: all oint Type eries ZPT/ZPR Pad diameters: ø, ø1, ø, ø,, ø, ø0 joint type ideal for adsorption on slanted work surfaces all eries ZPT: Vertical vacuum entry type eries ZPR: Lateral vacuum entry
Parallel Grippers- Low Profile Series
RPL SERIES 1.9 Parallel Grippers- Low Profile Series Precision applications: Preloaded Dual-V roller bearings eliminate side play for excellent part position repeatability. Repeatable grip force: Low friction
DURA-TAC ROTARY ACTUATORS SRA SERIES JG SERIES BALL DRIVEN RACK DRIVEN
DURATAC JG SERIES BALL DRIVEN SRA SERIES RACK DRIVEN See Page 51.1 See Page 52.1 DURATAC Rotary Actuators JGSERIES BALL DRIVEN DURATAC JG1000 is an economic rotary actuator with rotary motion achieved
Centering and Clamping Devices
Product Range External Alignment Clamps Type 1a for quick and accurate alignment of pipes of equal or differing diameters on a common center line automatic diameter compensation, no need for additional
50 to 300l/min 25,35MPa. wa wide range of models are available for A and B port control, A or B port control, and P or T port control.
low Regulator eatures qhis modular valve is used to control actuator speed and for other flow control valve applications. W RUR UR VV to l/min,a w wide range of models are available for and port control,
Series ZPT/ZPR. Vacuum Pad: Ball Joint Type. Pad diameters: ø10, ø13, ø16, ø20 ø25, ø32, ø40, ø50 ZX ZR ZM ZY ZH ZU ZL ZF ZP ZCU CYV
Pad: all oint Type eries ZPT/ZPR all Pad diameters: ø, ø1, ø, ø,, ø, ø0 joint type ideal for adsorption on slanted work surfaces Z ZR ZM Z Z ZU ZL Z ZP ZU V related eries ZPT: Vertical vacuum entry type
Series JA/JAH/JB. Floating Joint
Floating oint Series A/A/ The floating joint can absorb any "off-centring" or "loss of parallel accuracy" between the cylinder and the driven body. entring is unnecessary. A high level of machining accuracy
Solenoid valve for high vacuum. Orifice: 1, 2, 3, 4.5, 6. NC (normally closed) type. Cv flow factor (*4) Working pressure range Pa (abs)
V 1 V 1 Series Orifice: 1,,,., N (normally closed) type IS symbol N (normally closed) type ommon specifications escriptions Working fluid Withstanding pressure MPa luid temperature mbient temperature eat
ROCK DRILLS Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
S Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1027 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill the reservoir with air tool oil or 10W equivalent for
Wear Rings and Bearings. WPT Profile, Tight-Tolerance Piston Wear Ring. Technical Data
Wear Rings and Bearings Industrial Seal Inc. offers a complete line of wear rings and bearing products to fit any application. The product offering meets the full spectrum of needs, from heavy duty hydraulic
Rotary actuators Rotary wing drives Series RAK. Brochure
rochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:
1. The electrodes are comprised of four main parts: the PEEK piece, glass rod, bolt and stainless steel rod.
Assembly of dual immersion corrosion cell electrode mount 1. The electrodes are comprised of four main parts: the PEEK piece, glass rod, bolt and stainless steel rod. Figure 1. From left: PEEK piece, glass
DURA-GRIP PH-SERIES. Parallel Grippers PH-30 / PH-40 PH-50 / PH-60 PH-70
PHSERIES PH Series of Part Placement Devices is designed to provide a low cost gripping unit for use on transfer mechanisms. These air operated units grip parts internally or externally offering the designer
Parallel Grippers 1.1. For more information call us at: DESTACO or Fax: Visit us on the Internet at:
Parallel Grippers PARALLEL GRIPPERS 1.1 PARALLEL GRIPPERS 1.2 Parallel Motion Gripper DPP Precision Series Precision parallel gripper featuring our DIRECTCONNECT mounting pattern Dual-V precision roller
Building a vertical wobbler
Building a vertical wobbler I wanted to build a simple steam engine that would also run on compressed air. At Chris Heapy s website (http://easyweb.easynet.co.uk) I found drawings of a small double acting
RPE Parallel Gripper- Electric Gripper Series
1.14 RPE Parallel Gripper- Electric Gripper Series Failsafe Operation: Spring closed feature allows for full grip force during power off conditions. Electrically Actuated: Requires simple 24VDC pulsed
Plumbing Part II - Hand Pump
Plumbing Part II - Hand Pump Nelson Riedel Nelson@NelsonsLocomotive.com Initial: 7/17/03 Last Revised: 06/06/2004 The hand pump located in the tender water tank is a backup pump should the axel pump fail
The model number of all Transition Plates consists of two alphanumeric clusters. The first cluster designates product type, base product and bore size
Aluminum plates that couple Bimba actuators Ultran rodless cylinders, rotary actuators, and Thrusters into a variety of multi-axis configurations. The customer s attachment reads a bar code on the product
New eco-friendly guided cylinder
U SM ew easytouse Series ( to ) air cylinders Remove toxic substances and protect the environment by preventing contamination ort and needle on same plane ir supply/exhaust port and cushion needle installation
Floating Joint Series JA/JAH/JB
Floating Joint Series JA/JA/J The floating joint can absorb any off-centring or loss of parallel accuracy between the cylinder and the driven body. entring is unnecessary. A high level of machining accuracy
salto safe 4028 A12 Turn-tilt windows
A12 Turn-tilt windows salto safe 4028 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. 32 9 388 88 81 - F. 32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com salto safe 4028 Contents 1. General
Precision Chucks for Improved Accuracy and Increased Productivity
Precision Workholding Technology Precision Chucks for Improved Accuracy and Increased Productivity Precision Air Chucks (Self Contained Design) MicroCentric Precision Air Chucks feature a patented open
Lenovo IdeaPad U310 NoteBook
Lenovo IdeaPad U310 NoteBook 2012-09-12 Lenovo IdeaPad U310-Overview Lenovo IdeaPad U310-Overview Top View Left Side View Comments: Bottom View Both the top case and bottom case are aluminum alloy material
PARALLEL PNEUMATIC GRIPPERS MINIATURE SERIES
PRE PEUI GRIPPERS IIURE SERIES DESIGED FOR IFOD OUIG RP Series Small Part Handling RP-1 Precision Gripping Preloaded V Roller Bearings Eliminate Side Play Resulting in Excellent Part Positioning ccuracy
Mounting Systems & Hydro-Grip
Mounting Systems & ydro-rip Table of ontents Section escription Page Open nd Standard Sleeve... 4 Self entering Saw & ead Sleeve... 5 Set Screw ead Sleeves... 5 Steel & luminum Spacers... 6 Self entering
LF (Large Flange) Fittings - Adapters. (505)
LF (Large ) Fittings - dapters www.idealvac.com (505)72-007 Vacuum Fittings - dapters - olt Sets LF (Large ) ISO NW LF Specifications Max. Positive Pressure over pressure centering ring 0 psig Torque Rating
Multi-Purpose Handles Lift, Pull, Cabinet and Finger
Multi-Purpose Handles from UNITED Multi-Purpose Handles Lift, Pull, Cabinet and Finger LIFT Fixtures Cabinets ZINC PLTED WROUGHT STEEL UNITED'S UNIVERSL FVORITE! Strong Simple Quick Installation Widely
.500. location of stopscrews for Drill thru & c-bore for #10 S.H.C.S. (2) .60. #10-32 air connection (2).189 dia (2)
A -1 otary rive 0-180 ully Adjustable eatures Angle of rotation adjusted with built in stop screws with fine threads top screws are compatible with sensing switches esigned for production rates and long
HARDINGE Installation booklet For:
HARDINGE Installation booklet For: L Flange Nose Dead-Length Collet Adaptation Chucks Draw Collet Read the enclosed instructions and recommendations before any installations WARRANTY & RETURN PROCEDURES
Linear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11
-0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide
RP-VE450FSD VE450FSD Roll Grooving Tool
PARTS ORDERIN INFORMATION hen ordering parts, the following information is necessary for Victaulic to process the order promptly: 1. Tool Model Number 2. Tool Serial Number The serial number can be found
The Engineer s Guide to Identifying Lead Screw Thread Forms
The Engineer s Guide to Identifying Lead Screw Thread Forms Thread Forms There are hundreds of different thread forms that have been designed over several decades. There are only a few specific thread
CMM INSPECTION FIXTURING
0 SES PAES C M M I N S P E C I O N F I X U R I N G Manual Clamps rimax Vises Pneumatic orkholding Supports, Stops & Set Up Accessories Precision ooling Plates, Blocks & ocators orkholding & Positioning
Precision Pneumatic Grippers
TLOG GR-8 Precision Pneumatic Grippers dvanced Parallel & ngular Jaw Motion Designs Product Index SPG Series Parallel Jaw Motion Grippers Product Selection Guide... 6 ow to Order... 7 pplication Tips...
NUMBER: S.M. REF.: Listed in Table ENGINE: Series 60 DATE: February 2010
NUMBER: 2 1 10 S.M. REF.: Listed in Table ENGINE: Series 60 DATE: February 2010 SUBJECT: CYLINDER LINER PROTRUSION & INSTALLATION ADDITIONS, REVISIONS, OR UPDATES Publication Number Platform Section Title
~:H:OlV:D.A. ~ CB1000C CYLINDER/PISTON Date of Issue: Sept., 1982 HONDA MOTOR CO., LTD.
~:H:OlV:D.A. 7-0 108 r:::ij\:h:olv:d.a. 7. CYLINDER/PISTON SERVICE INFORMATION TROUBLESHOOTING CYLINDER REMOVAL 7-1 7-1 7-2 PISTON REMOVAL PISTON INSTAllATION CYLINDER INSTAllATION 7-3 7-7 7-7 SERVICE
OPERATING MANUAL SHOCK TOOL OWS WENZEL DOWNHOLE TOOLS LTD.
OPERATING MANUAL SHOCK TOOL OWS WENZEL DOWNHOLE TOOLS LTD. Release Notes: Release 2 Issued May 2016 Document # OM ST 001, Shock Tool Operating Manual Reviewed By: RG 1 P age OPERATING MANUAL SHOCK TOOL
HARDINGE Installation booklet For: Dead-Length Collet Adaptation Chucks Stationary Collet
HARDINGE Installation booklet For: Dead-Length Collet Adaptation Chucks Stationary Collet Read the enclosed instructions and recommendations before any installations CONTENTS Dead-Length Collet Adaptation
PIONEER TRADING CO., LTD.
PRECISION KURODA LTD. OIL COUNTRY GAUGES API THREAD GAUGES PREMIUM CONNECTION GAUGES THREAD MEASURING INSTRUMENTS CONTACT TO: PIONEER TRADING CO., LTD. 4-1 Kuzuha-Asahi 3-Chome Hirakata Osaka 573-1111,
PRODUCT DETAILS HR Series
PROUT ETILS N. uyamaca, El ajon, 900 escription: The patented cast parts are designed for round, tubular handrails. The part is attached with two stainless steel tamper resistant screws and two-part epoxy.
AHU. Specifications. Materials. Ordering Information E UL Approved Illuminated Pushbutton. page 1
Specifications RoHS Compliant E222871 AHU Electrical Ratings Sealing Degree Electrical Life Mechanical Life Contact Resistance 3A @ 125VAC, 65 C, 50K cycles 3A @ 250VAC, 65 C, 50K cycles IP65 50,000 cycles
INSTALLATION INSTRUCTIONS / DODGE RAM CREW CAB 2500/3500
INSTALLATION INSTRUCTIONS 225019 / 225019-2 2010 DODGE RAM CREW CAB 2500/3500 PARTS LIST: Qty Description Qty Description 1 Driver/Left Side Bar 4 Plastic Square Retainer 1 Side Bar 2 12mm x 120mm Hex
Swivel Hoist Ring Page 142
Swivel Hoist Ring Page 142 Hoist Rings Color coded to distinguish between UNC (Red) and Metric (Silver) thread types HR-125 M HR-125 Available in UNC and Metric thread sizes. UNC threads available in sizes
Triaxial Cells. Impact Test Equipment Ltd & User Guide. User Guide
Triaxial Cells Impact Test Equipment Ltd www.impact-test.co.uk & www.impact-test.com User Guide User Guide Impact Test Equipment Ltd. Building 21 Stevenston Ind. Est. Stevenston Ayrshire KA20 3LR T: 01294
RG Connector (Molded Mating Extension Cable Required) A H B G. MS Connector (Mating Connector: P/N ; MS3116F-12-10S or Extension Cable)
T E M P O S O N I C S L S E R I E S INSTALLATION A N A L O G O U T P U T 550570 B W I R I N G - A N A L O G O U T P U T S RG Connector: (Voltage or Current Output) 1 Gray 0 to 10 Vdc, 4 to 20 ma, or 0
SPIDA SAW OPERATIONS MANUAL
SPIDA SAW OPERATIONS MANUAL CM SERIAL NUMBER. OCTOBER 2000 CONTENTS Page description 1.) Contents 2.) Safety First 3.) CM Overview 4.) CM Specifications 5.) CM Installation 6.) CM Operation Setting the
ENGINE REBUILDING MACHINES
ENGINE REBUILDING MACHINES Zylinderbohrwerke: Typ MA Typ SIRIO Typ SPES Typ ORION Typ OLYMPIA 19 MA OLIMPIA ORION SPES SIRIO 20 Automatic emergency stop system. Total shutdown in case of accidental impact
BT-P Tuff Parallel Motion Gripper
- uff arallel otion ripper eatures echnical ata peration ressure = 60-110 psi epeat accuracy = +/-0.002" ife expectancy = >5 million cycles 6 quare body design with built in cylinder oller burnished..
SCHMIDT HydroPneumaticPress
Maximum orce Range from 15 kn to 220 kn / 3,375 lbs. to 49,460 lbs. The SCHMIDT HydroPneumaticPress range consists of a modular system suitable for optimally transforming, joining and assembling within
The Canadian Tire Paint Roller A Technical Description
A Technical Description Eric Morlang Table of Contents 1. General Description of the Paint Roller... 3 2. Part-By-Part Description of the Paint Roller... 4 2.1 Body... 4 2.1.1 Handle... 4 2.1.2 Wire...
Example workpieces: - Gearbox casing. Example format: - Diameter 800 mm
RADIAL CHUCKS SAV 260.99-RSF 3 + 3 JAW CHUCKS - 3 + 3 jaw chuck with two independently actuated clamping circles - Easily adaptable from centred to balanced operation - Jaw stroke 15 mm (Stroke per jaw)
H2-50 Hydrogen Generator Field Update
This field update is intended to provide extra protection in the event the H2 generation cell fractures or cracks. Please add the additional parts to your H2-50 as soon as possible. Please take a digital
Temposonics. R-Series SSI. Absolute, Non-Contact Position Sensors. Temposonics RP and RH Stroke length mm. Perfect data processing 0.
R-Series Temposonics Absolute, Non-Contact Position Sensors R-Series Temposonics RP and RH 25 7600 mm Perfect data processing 0.5 μm Rugged industrial sensor Linear and absolute measurement LEDs for sensor
SC Spare parts list. Hydraulic steel cutter. SC 3600 s/n DEQ Construction Tools GmbH No
SC 3600 Spare parts list Hydraulic steel cutter SC 3600 s/n DEQ169166-2018 Construction Tools GmbH No. 3390788601 2018-05-09 General information This spare parts list applies to the following: Part number
Swivel Hoist Ring RIGGING ACCESSORIES. Color coded to distinguish between UNC (Red) and Metric (Silver) thread types.
RIGGING ACCESSORIES Color coded to distinguish between UNC (Red) and Metric (Silver) thread types. Available in UNC and Metric thread sizes. UNC threads available in sizes from 800 pounds to 100,000 pounds,
Technical Manual. ETP-CLASSIC incl type R. Content
Technical Manual ETP-CLASSIC incl type R Content Technical parts description...2 Mounting/dismantling tips...4 Design suggestions...7 Tolerances...13 Central bolt...15 Torsional stiffness...16 Screw pitch
Deadblow Hammer. Resists cut damage to Hammer head ends. Lightweight, plastic handle provides both comfort and control during use.
ammers, unches, and hisels W offers a variety of striking tools that are regularly needed for maintenance and industrial applications. These hammers range in style from wood handled ball pein and sledge
45PC. TAP AND DIE SET
Model # 7560 7561 45PC. TAP AND DIE SET OPERATOR S MANUAL STORE THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE Wear eye protection Use proper lubrication WARNING: FOR HAND CUTTING APPLICATIONS ONLY.
DGA LINE CATALOG
DGA LINE CATALOG 2018-2019 CONTENT PRODUCTS DGA Line 3 Order overview DGA Line 4 3-jaw chuck for fast clamping made on aluminum 6 Chuck with basic and top jaws for use in measuring technology 6 Basic jaw
Hardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
Silver Ball Matrix BGA Socket
A1 corner 4.600 Silver Ball Matrix BGA Socket Features Wide temperature range (-55C to +0C). Current capability is 4A per pin. Over 40GHz bandwidth @-1dB for edge pins. Low and stable contact resistance
2-JAW SELF-CENTERING PARALLEL PNEUMATIC GRIPPER (SERIES S)
2-JAW ELF-CENTERING PARALLEL PNEUMATIC GRIPPER (ERIE ) Hanover IF Design Award Winner. Modular with Gimapick ystem. Double-acting (single-acting on request). Bottom porting is available. High gripping
Bedienungsanleitung - Operating Instructions - Mode d emploi
Bedienungsanleitung - Operating Instructions - Mode d emploi LAMINATED BUSBAR MACHINING UNIT 2017 Alfra GmbH II. Industriestraße 10 D-68766 Hockenheim Tel.: +49 (0)6205-3051-0 Fax: +49 (0)6205-3051-150
Ordering Guide - Shaft Assemblies -
Ordering uide - Shaft ssemblies - S & TRS Series TRS - - SS - 4 ssembly Type S TRS Shaft Diameter Overall Length xxx - inches Shaft Material - 00 Steel SS - 440C Stainless Steel CR - Chrome Plated 00 Steel
Price $ $ $ Filtered compressed air, lubricated or non-lubricated
2-JAW SELF-CENTERING RADIAL PNEUMATIC GRIPPER (SERIES PS-P) Double-acting radial motion. The gripping force is constant through the entire stroke (from 0 to 90, both opening and closing). Lightweight:
Special Thumb Screw Order Form
Special Thumb Screw Order Form QUOTE FOR: ORDER FOR: Name: Company: Address: QUANTITY: Phone #: City: State: Zip: Email Address: FILL IN YOUR DIMENSIONS write directly over light blue type* write clearly
Diesel Pile Hammer D30-32 Part # 66508
Diesel Pile Hammer D30-32 Part # 66508 2 Diesel Pile Hammer D30-32 Part # 66508 Pos Order No Pg Description Qty 66508 Diesel Pile Hammer D30-32 cmpl 1 1 108742 4 Cylinder Lower Part cmpl 1 2 60151 Inner
SensyTemp TSBA (BA R) Resistance thermometer for building automation, machine construction and environmental engineering
Change from one to two columns Data Sheet 10/10-3.61-EN Rev. D SensyTemp TSB (B R) Resistance thermometer for building automation, machine construction and environmental engineering Measurement made easy
L40. Pneumatic linear slide L40
L40 Pneumatic linear slide High stiffness and deflection resistance. Up to 30kg on the carrier. Guidance with recirculating ball-bearings. Exclusive belt drive system. Hydraulic shock-absorbers on the
ES Series Features Detecting distance twice that of conventional
Long-distance Separate-amplifier Series Features Detecting distance twice that of conventional sensors Detecting distance easily adjustable Wide range of sensor head types available Built-in alarm output
Basket & Screen Data. Cylindrical baskets for simplex and duplex strainers up to 8" size
Basket & Screen Data Cylindrical baskets for simplex and duplex strainers up to 8" size Slant top baskets for Model 510 simplex and Model 570 duplex strainers sizes 8" to 36" Basket and Screen Design The
Procedure title: Drawbar tension removing and upper cover removal
DISASSEMBLY PROCEUDRES: Procedure title: Drawbar tension removing and upper cover removal Procedure: page #1 1. Assemble tensioning units and sling spreader. See pictures (QA assembly notes log book page
COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS
COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS ROYAL QUICK-GRIP MANUAL COLLET FIXTURES FOR 4TH AND 5TH AXIS APPLICATIONS q Unit is actuated via a hybrid mechanical/hydraulic mechanism.
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk WIRE ROPE CUTTER RCV190 PRODUCT CODE No. 980230 INSTRUCTIONS FOR INSTALLATION,
CONSTRUCTION MATERIALS
CHANNEL GATE The model is a rectangular penstock designed for open channel installation. A resilient sealing feature is incorporated on 3 sides, (both laterals and bottom), resulting in a perfect seal
Water Level Transducer WLT-704
ierra Control ystems, Inc. Water Measurement and Control ystems Product Data heet Description The is a precision instrument for remote monitoring of water surface levels. The uses a precision float-tape-counterweight
C-15 Truck Engine 9NZ00001-UP(SEBP ) - Document Structure. Media Number -RENR Publication Date -01/07/2008 Date Updated -22/07/2008
Page 1 of 8 Shutdown SIS Previous Screen Product: TRUCK ENGINE Model: C-15 TRUCK ENGINE 9NZ Configuration: C-15 Truck Engine 9NZ00001-UP Disassembly and Assembly C-15, C-16 and C-18 Truck Engines Media
K3D60a ±100N. Description. The K3D60a three-axis sensor is suitable for measuring force on three mutually perpendicular axes.
K3D60a ±100N Description The K3D60a three-axis sensor is suitable for measuring force on three mutually perpendicular axes. The new 3-axis sensor K3D60a is a further development of the series K3D60 and
Temposonics. R-Series SSI. Absolute, Non-Contact Position Sensors. Temposonics RP and RH Measuring length mm. Perfect data processing I 7 I
Temposonics Absolute, Non-Contact Position Sensors R-Series Temposonics RP and RH Measuring length 5-7600 mm Perfect data processing 0,5 µm Rugged Industrial Sensor Linear and Absolute Measurement LEDs
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors M-Series Mobile Hydraulic in-cylinder Sensor Model MH PWM Output Data Sheet SENSORS Document Part Number 551119 Revision B M-Series
EN 1092 PN 10 EN 1092 PN 16 JIS B K ANSI B16.5 Class 150 ANSI B16.47 Class 150 BS 10 Table D
HG EN 1092 PN 10 EN 1092 PN 16 JIS 2238 10K ANSI 16.5 Class 150 ANSI 16.47 Class 150 S 10 Table D Stafsjö s knife gate valve HG is a bi-directional valve, particularly well suited for severe operating
Pipe Restrainers series C Restrainers for use on IPEX Bionax AWWA CI OD C909 PVCO Pipe with MJ or Push-On Fittings
Pipe Restrainers series 1000 1000C Restrainers for use on IPEX Bionax AWWA CI OD C909 PVCO Pipe with MJ or Push-On Fittings INFORMATION Restrainers for restraining mechanical joint or push-on fittings
CIRRUS AIRPLANE MAINTENANCE MANUAL
PROPELLER ASSEMBLY 1. DESCRIPTION The propeller assembly consists of a hollow aluminum hub which supports the propeller blades and also houses the pitch changing mechanism. Movement of propeller blades
NATIONAL CERTIFICATE (VOCATIONAL) ENGINEERING TECHNOLOGY NQF LEVEL 2 NOVEMBER 2010
NATIONAL CERTIFICATE (VOCATIONAL) ENGINEERING TECHNOLOGY NQF LEVEL 2 NOVEMBER 2010 (6021012) 24 November (X-Paper) 09:00 12:00 This question paper consists of 10 pages and 1 annexure. (6021012) -2- NC920(E)(N24)V
Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors
Section : Right ngle Printed ircuit oard Receptacles With Pin ontacts, Right ngle Termination, 0-04P Lightweight, rugged right angle headers feature gold-plated contacts for thru-hole printed circuit board
2-jaw parallel self-centering pneumatic gripper (series PE)
PE -jaw parallel self-centering pneumatic gripper (series PE) Double acting (single acting upon request for PE-5... and PE-5...). High efficiency and reliability due to the lack of driving parts. Wide
COYOTE. Product Guide VOLUME 1
COYOTE Product Guide VOLUME 1 CYLINDER HEAD STUD KITS The key to optimum combustion chamber sealing and long-term reliability, ARP head studs are the ideal replacement for factory TTY (Torque To Yield)
Stargrip series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe
Stargrip series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe INFORMATION The Stargrip Mechanical Joint Restraint System is a unique product with a proven design that provides an exceptional
UNIVERSITY OF THESSALY
UNIVERSITY OF THESSALY MECHANICAL ENGINEERING DEPARTMENT Instructor: Dr. S.D. Chouliara e-mail: schoul@uth.gr MACHINE ELEMENTS Task 2 1. Let the bolt in the following Figure be made from cold-drawn steel.
eddyncdt 3010 Non-Contact Displacement Measuring Systems
Eddy current sensors for displacement, distance and position Eddy current and inductive measurement system and sensors with micrometer resolution for linear measurement and displacement, distance and position
ANNEXURE-Y80350 FOR FLAT SEAT FULL BORE GLOBE Valve Grinding and Lapping Machine TYPE GHF-Y80350 size 80mm dia to 350mm dia
ANNEXURE-Y80350 FOR FLAT SEAT FULL BORE GLOBE Valve Grinding and Lapping Machine TYPE GHF-Y80350 size 80mm dia to 350mm dia You can do lapping of 2 valves of different size in this range. Operative Range:
PC-196 B-3-A 7-1/2 NYCOPAC BRAKE ASSEMBLIES PARTS CATALOG. Publication 501-TAB 8
B-3-A 7-1/2 NYCOPAC BRAKE ASSEMBLIES PARTS CATALOG Publication 501-TAB 8 Revision A November 1, 1991 APPROX. COMPLETE HANDBRAKE NET WT PART NO. TON WHEEL WHEEL ASSEMBLY LBS (CAR SET) CAR BASE DIA. PART
Pressure Vessel Assembly Instructions
Pressure Vessel Assembly Instructions 1) Measure aluminum tube outer diameter 2) Machine both end caps and only drill pilot holes for all hoes shown 3) Weld both end caps onto the aluminum tube and be